-
Near Real-Time Data-Driven Control of Virtual Reality Traffic in Open Radio Access Network
Authors:
Andreas Casparsen,
Beatriz Soret,
Jimmy Jessen Nielsen,
Petar Popovski
Abstract:
In mobile networks, Open Radio Access Network (ORAN) provides a framework for implementing network slicing that interacts with the resources at the lower layers. Both monitoring and Radio Access Network (RAN) control is feasible for both 4G and 5G systems. In this work, we consider how data-driven resource allocation in a 4G context can enable adaptive slice allocation to steer the experienced lat…
▽ More
In mobile networks, Open Radio Access Network (ORAN) provides a framework for implementing network slicing that interacts with the resources at the lower layers. Both monitoring and Radio Access Network (RAN) control is feasible for both 4G and 5G systems. In this work, we consider how data-driven resource allocation in a 4G context can enable adaptive slice allocation to steer the experienced latency of Virtual Reality (VR) traffic towards a requested latency. We develop an xApp for the near real-time RAN Intelligent Controller (RIC) that embeds a heuristic algorithm for latency control, aiming to: (1) maintain latency of a VR stream around a requested value; and (2) improve the available RAN allocation to offer higher bit rate to another user. We have experimentally demonstrated the proposed approach in an ORAN testbed. Our results show that the data-driven approach can dynamically follow the variation of the traffic load while satisfying the required latency. This results in 15.8% more resources to secondary users than a latency-equivalent static allocation.
△ Less
Submitted 3 January, 2024;
originally announced January 2024.
-
Enabling On-Demand Cyber-Physical Control Applications with UAV Access Points
Authors:
Igor Donevski,
Jimmy Jessen Nielsen
Abstract:
Achieving cyber-physical control over a wireless channel requires satisfying both the timeliness of a single packet and preserving the latency reliability across several consecutive packets. To satisfy those requirements as an ubiquitous service requires big infrastructural developments, or flexible on-demand equipment such as UAVs. To avoid the upfront cost in terms of finance and energy, this pa…
▽ More
Achieving cyber-physical control over a wireless channel requires satisfying both the timeliness of a single packet and preserving the latency reliability across several consecutive packets. To satisfy those requirements as an ubiquitous service requires big infrastructural developments, or flexible on-demand equipment such as UAVs. To avoid the upfront cost in terms of finance and energy, this paper analyzes the capability of UAV access points (UAVAPs) to satisfy the requirements for cyber-physical traffic. To investigate this, we perform a Gilbert-Eliott burst-error analysis that is analytically derived as a combination of two separate latency measurement campaigns and provide an upper-bound analysis of the UAVAP system. The analysis is centered around a UAVAP that uses its LTE connection to reach the backhaul, while providing service to ground nodes (GNs) with a Wi-Fi access point (AP). Thus, we combine both measurement campaigns to analyze the plausibility of the described setup in casual, crowded or mixed network settings.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
Sustainable Wireless Services with UAV Swarms Tailored to Renewable Energy Sources
Authors:
Igor Donevski,
Marco Virgili,
Nithin Babu,
Jimmy Jessen Nielsen,
Andrew J. Forsyth,
Constantinos B. Papadias,
Petar Popovski
Abstract:
Unmanned Aerial Vehicle (UAV) swarms are often required in off-grid scenarios, such as disaster-struck, war-torn or rural areas, where the UAVs have no access to the power grid and instead rely on renewable energy. Considering a main battery fed from two renewable sources, wind and solar, we scale such a system based on the financial budget, environmental characteristics, and seasonal variations.…
▽ More
Unmanned Aerial Vehicle (UAV) swarms are often required in off-grid scenarios, such as disaster-struck, war-torn or rural areas, where the UAVs have no access to the power grid and instead rely on renewable energy. Considering a main battery fed from two renewable sources, wind and solar, we scale such a system based on the financial budget, environmental characteristics, and seasonal variations. Interestingly, the source of energy is correlated with the energy expenditure of the UAVs, since strong winds cause UAV hovering to become increasingly energy-hungry. The aim is to maximize the cost efficiency of coverage at a particular location, which is a combinatorial optimization problem for dimensioning of the multivariate energy generation system under non-convex criteria. We have devised a customized algorithm by lowering the processing complexity and reducing the solution space through sampling. Evaluation is done with condensed real-world data on wind, solar energy, and traffic load per unit area, driven by vendor-provided prices. The implementation was tested in four locations, with varying wind or solar intensity. The best results were achieved in locations with mild wind presence and strong solar irradiation, while locations with strong winds and low solar intensity require higher Capital Expenditure (CAPEX) allocation.
△ Less
Submitted 23 November, 2022; v1 submitted 22 November, 2022;
originally announced November 2022.
-
Fairness Based Energy-Efficient 3D Path Planning of a Portable Access Point: A Deep Reinforcement Learning Approach
Authors:
Nithin Babu,
Igor Donevski,
Alvaro Valcarce,
Petar Popovski,
Jimmy Jessen Nielsen,
Constantinos B. Papadias
Abstract:
In this work, we optimize the 3D trajectory of an unmanned aerial vehicle (UAV)-based portable access point (PAP) that provides wireless services to a set of ground nodes (GNs). Moreover, as per the Peukert effect, we consider pragmatic non-linear battery discharge for the battery of the UAV. Thus, we formulate the problem in a novel manner that represents the maximization of a fairness-based ener…
▽ More
In this work, we optimize the 3D trajectory of an unmanned aerial vehicle (UAV)-based portable access point (PAP) that provides wireless services to a set of ground nodes (GNs). Moreover, as per the Peukert effect, we consider pragmatic non-linear battery discharge for the battery of the UAV. Thus, we formulate the problem in a novel manner that represents the maximization of a fairness-based energy efficiency metric and is named fair energy efficiency (FEE). The FEE metric defines a system that lays importance on both the per-user service fairness and the energy efficiency of the PAP. The formulated problem takes the form of a non-convex problem with non-tractable constraints. To obtain a solution, we represent the problem as a Markov Decision Process (MDP) with continuous state and action spaces. Considering the complexity of the solution space, we use the twin delayed deep deterministic policy gradient (TD3) actor-critic deep reinforcement learning (DRL) framework to learn a policy that maximizes the FEE of the system. We perform two types of RL training to exhibit the effectiveness of our approach: the first (offline) approach keeps the positions of the GNs the same throughout the training phase; the second approach generalizes the learned policy to any arrangement of GNs by changing the positions of GNs after each training episode. Numerical evaluations show that neglecting the Peukert effect overestimates the air-time of the PAP and can be addressed by optimally selecting the PAP's flying speed. Moreover, the user fairness, energy efficiency, and hence the FEE value of the system can be improved by efficiently moving the PAP above the GNs. As such, we notice massive FEE improvements over baseline scenarios of up to 88.31%, 272.34%, and 318.13% for suburban, urban, and dense urban environments, respectively.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
Performance trade-offs in cyber-physical control applications with multi-connectivity
Authors:
Igor Donevski,
Israel Leyva Mayorga,
Jimmy Jessen Nielsen,
Petar Popovski
Abstract:
Modern communication devices are often equipped with multiple wireless communication interfaces with diverse characteristics. This enables exploiting a form of multi-connectivity known as interface diversity to provide path diversity with multiple communication interfaces. Interface diversity helps to combat the problems suffered by single-interface systems due to error bursts in the link, which a…
▽ More
Modern communication devices are often equipped with multiple wireless communication interfaces with diverse characteristics. This enables exploiting a form of multi-connectivity known as interface diversity to provide path diversity with multiple communication interfaces. Interface diversity helps to combat the problems suffered by single-interface systems due to error bursts in the link, which are a consequence of temporal correlation in the wireless channel. The length of an error burst is an essential performance indicator for cyber-physical control applications with periodic traffic, as these define the period in which the control link is unavailable. However, the available interfaces must be correctly orchestrated to achieve an adequate trade-off between latency, reliability, and energy consumption. This work investigates how the packet error statistics from different interfaces impacts the overall latency-reliability characteristics and explores mechanisms to derive adequate interface diversity policies. For this, we model the optimization problem as a partially observable Markov Decision Process (POMDP), where the state of each interface is determined by a Gilbert-Elliott model whose parameters are estimated based on experimental measurement traces from LTE and Wi-Fi. Our results show that the POMDP approach provides an all-round adaptable solution, whose performance is only 0.1% below the absolute upper bound, dictated by the optimal policy under the impractical assumption of full observability.
△ Less
Submitted 6 August, 2021;
originally announced August 2021.
-
On Addressing Heterogeneity in Federated Learning for Autonomous Vehicles Connected to a Drone Orchestrator
Authors:
Igor Donevski,
Jimmy Jessen Nielsen,
Petar Popovski
Abstract:
In this paper we envision a federated learning (FL) scenario in service of amending the performance of autonomous road vehicles, through a drone traffic monitor (DTM), that also acts as an orchestrator. Expecting non-IID data distribution, we focus on the issue of accelerating the learning of a particular class of critical object (CO), that may harm the nominal operation of an autonomous vehicle.…
▽ More
In this paper we envision a federated learning (FL) scenario in service of amending the performance of autonomous road vehicles, through a drone traffic monitor (DTM), that also acts as an orchestrator. Expecting non-IID data distribution, we focus on the issue of accelerating the learning of a particular class of critical object (CO), that may harm the nominal operation of an autonomous vehicle. This can be done through proper allocation of the wireless resources for addressing learner and data heterogeneity. Thus, we propose a reactive method for the allocation of wireless resources, that happens dynamically each FL round, and is based on each learner's contribution to the general model. In addition to this, we explore the use of static methods that remain constant across all rounds. Since we expect partial work from each learner, we use the FedProx FL algorithm, in the task of computer vision. For testing, we construct a non-IID data distribution of the MNIST and FMNIST datasets among four types of learners, in scenarios that represent the quickly changing environment. The results show that proactive measures are effective and versatile at improving system accuracy, and quickly learning the CO class when underrepresented in the network. Furthermore, the experiments show a tradeoff between FedProx intensity and resource allocation efforts. Nonetheless, a well adjusted FedProx local optimizer allows for an even better overall accuracy, particularly when using deeper neural network (NN) implementations.
△ Less
Submitted 5 August, 2021;
originally announced August 2021.
-
An Experimental Analysis on Drone-Mounted Access Points for Improved Latency-Reliability
Authors:
Igor Donevski,
Christian Raffelsberger,
Micha Sende,
Aymen Fakhreddine,
Jimmy Jessen Nielsen
Abstract:
The anticipated densification of contemporary communications infrastructure expects the use of drone small cells (DSCs). Thus, we experimentally evaluate the capability of providing local and personalized coverage with a drone mounted Wi-Fi access point that uses the nearby LTE infrastructure as a backhaul in areas with mixed line of sight(LoS) and Non-LoS (NLoS) links to the local cellular infras…
▽ More
The anticipated densification of contemporary communications infrastructure expects the use of drone small cells (DSCs). Thus, we experimentally evaluate the capability of providing local and personalized coverage with a drone mounted Wi-Fi access point that uses the nearby LTE infrastructure as a backhaul in areas with mixed line of sight(LoS) and Non-LoS (NLoS) links to the local cellular infrastructure. To assess the potential of DSCs for reliable and low latency communication of outdoor users, we measure the channel quality and the total round trip latency of the system. For a drone following the ground user, the DSC-provided network extends the coverage for an extra 6.4% when compared to the classical LTE-direct link. Moreover, the DSC setup provides latencies that are consistently smaller than 50 msfor 95% of the experiment. Within the coverage of the LTE-direct connection, we observed a latency ceiling of 120ms for 95% reliability of the LTE-direct connection. The highest latency observed for the DSC system was 1200ms, while the LTE-direct link never exceeded 500 ms. As such, DSC setups are not only essential in NLoS situations, but consistently improve the latency of users in outdoor scenarios.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Modelling and Experimental Validation for Battery Lifetime Estimation in NB-IoT and LTE-M
Authors:
André Sørensen,
Hua Wang,
Maxime Jérôme Remy,
Nicolaj Kjettrup,
René Brandborg Sørensen,
Jimmy Jessen Nielsen,
Petar Popovski,
Germán Corrales Madueño
Abstract:
Internet of Things (IoT) is one of the main features in 5G. Low-power wide-area networking (LPWAN) has attracted enormous research interests to enable large scale deployment of IoT, with the design objectives of low cost, wide coverage area, as well as low power consumption. In particular, long battery lifetime is essential since many of the IoT devices will be deployed in hard-to-access locations…
▽ More
Internet of Things (IoT) is one of the main features in 5G. Low-power wide-area networking (LPWAN) has attracted enormous research interests to enable large scale deployment of IoT, with the design objectives of low cost, wide coverage area, as well as low power consumption. In particular, long battery lifetime is essential since many of the IoT devices will be deployed in hard-to-access locations. Prediction of the battery lifetime depends on the accurate modelling of energy consumption. This paper presents a comprehensive power consumption model for battery lifetime estimation, which is based on User Equipment(UE) states and procedures, for two cellular IoT technologies: Narrowband Internet of Things (NB-IoT) and Long Term Evolution for Machines (LTE-M). A measurement testbed has been setup and the proposed model has been tested and validated via extensive measurements under various traffic patterns and network scenarios, achieving the modelling inaccuracy within5%. The measurement results show that the battery lifetime of an IoT device can reach up to 10 years as required by 3GPP, with proper configuration of the traffic profile, the coverage scenario, as well as the network configuration parameters.
△ Less
Submitted 27 February, 2022; v1 submitted 24 June, 2021;
originally announced June 2021.
-
Standalone Deployment of a Dynamic Drone Cell for Wireless Connectivity of Two Services
Authors:
Igor Donevski,
Jimmy Jessen Nielsen,
Petar Popovski
Abstract:
We treat a setting in which two priority wireless service classes are offered in a given area by a drone small cell (DSC). Specifically, we consider broadband (BB) user with high priority and reliability requirements that coexists with random access machine-type-communications (MTC) devices. The drone serves both connectivity types with a combination of orthogonal slicing of the wireless resources…
▽ More
We treat a setting in which two priority wireless service classes are offered in a given area by a drone small cell (DSC). Specifically, we consider broadband (BB) user with high priority and reliability requirements that coexists with random access machine-type-communications (MTC) devices. The drone serves both connectivity types with a combination of orthogonal slicing of the wireless resources and dynamic horizontal opportunistic positioning (D-HOP). We treat the D-HOP as a computational geometry function over stochastic BB user locations which requires careful adjustment in the deployment parameters to ensure MTC service at all times. Using an information theoretic approach, we optimize DSC deployment properties and radio resource allocation for the purpose of maximizing the average rate of BB users. While respecting the strict dual service requirements we analyze how system performance is affected by stochastic user positioning and density, topology, and reliability constraints combinations. The numerical results show that this approach outperforms static DSCs that fit the same coverage constraints, with outstanding performance in the urban setting.
△ Less
Submitted 24 January, 2021;
originally announced January 2021.
-
Queuing with Deterministic Service Times and No Waiting Lines in Machine Type Communications
Authors:
René Brandborg Sørensen,
Jimmy Jessen Nielsen,
Petar Popovski
Abstract:
The growth of Machine-Type Communication (MTC) increases the relevance of queuing scenarios with deterministic service times. In this letter, we present a model for queues without waiting lines and with degenerate service time distributions and show how the framework is extendable to model general service time distributions. Simple bounds and a close approximation of the blocking probability are d…
▽ More
The growth of Machine-Type Communication (MTC) increases the relevance of queuing scenarios with deterministic service times. In this letter, we present a model for queues without waiting lines and with degenerate service time distributions and show how the framework is extendable to model general service time distributions. Simple bounds and a close approximation of the blocking probability are derived and the results are shown to hold for simulated queues with Markovian and degenerate arrival processes.
△ Less
Submitted 8 September, 2020;
originally announced September 2020.
-
Dynamic Standalone Drone-Mounted Small Cells
Authors:
Igor Donevski,
Jimmy Jessen Nielsen
Abstract:
This paper investigates the feasibility of Dynamic Horizontal Opportunistic Positioning (D-HOP) use in Drone Small Cells (DSCs), with a central analysis on the impact of antenna equipment efficiency onto the optimal DSC altitude that has been chosen in favor of maximizing coverage. We extend the common urban propagation model of an isotropic antenna to account for a directional antenna, making it…
▽ More
This paper investigates the feasibility of Dynamic Horizontal Opportunistic Positioning (D-HOP) use in Drone Small Cells (DSCs), with a central analysis on the impact of antenna equipment efficiency onto the optimal DSC altitude that has been chosen in favor of maximizing coverage. We extend the common urban propagation model of an isotropic antenna to account for a directional antenna, making it dependent on the antenna's ability to fit the ideal propagation pattern. This leads us to define a closed-form expression for calculating the Rate improvement of D-HOP implementations that maintain constant coverage through antenna tilting. Assuming full knowledge of the uniformly distributed active users' locations, three D-HOP techniques were tested: in the center of the Smallest Bounding Circle (SBC); the point of Maximum Aggregated Rate (MAR); and the Center-Most Point (CMP) out of the two aforementioned. Through analytic study and simulation we infer that DSC D-HOP implementations are feasible when using electrically small and tiltable antennas. Nonetheless, it is possible to achieve average per user average rate increases of up to 20-35% in low user density scenarios, or 3-5% in user-dense scenarios, even when using efficient antennas in a DSC that has been designed for standalone coverage.
△ Less
Submitted 4 September, 2020;
originally announced September 2020.
-
Machine Learning Methods for Monitoring of Quasi-Periodic Traffic in Massive IoT Networks
Authors:
René Brandborg Sørensen,
Jimmy Jessen Nielsen,
Petar Popovski
Abstract:
One of the central problems in massive Internet of Things (IoT) deployments is the monitoring of the status of a massive number of links. The problem is aggravated by the irregularity of the traffic transmitted over the link, as the traffic intermittency can be disguised as a link failure and vice versa. In this work we present a traffic model for IoT devices running quasi-periodic applications an…
▽ More
One of the central problems in massive Internet of Things (IoT) deployments is the monitoring of the status of a massive number of links. The problem is aggravated by the irregularity of the traffic transmitted over the link, as the traffic intermittency can be disguised as a link failure and vice versa. In this work we present a traffic model for IoT devices running quasi-periodic applications and we present both supervised and unsupervised machine learning methods for monitoring the network performance of IoT deployments with quasi-periodic reporting, such as smart-metering, environmental monitoring and agricultural monitoring. The unsupervised methods are based on the Lomb-Scargle periodogram, an approach developed by astronomers for estimating the spectral density of unevenly sampled time series.
△ Less
Submitted 27 February, 2020; v1 submitted 4 February, 2020;
originally announced February 2020.
-
Reliability and Error Burst Length Analysis of Wireless Multi-Connectivity
Authors:
Jimmy J. Nielsen,
Israel Leyva-Mayorga,
Petar Popovski
Abstract:
Multi-connectivity offers diversity in terms of multiple interfaces through which the data can be sent, thereby improving simultaneously the overall reliability and latency. This makes interface diversity a natural candidate for supporting Ultra-Reliable Low Latency Communications (URLLC). This work investigates how the packet error statistics from different interfaces impacts the overall reliabil…
▽ More
Multi-connectivity offers diversity in terms of multiple interfaces through which the data can be sent, thereby improving simultaneously the overall reliability and latency. This makes interface diversity a natural candidate for supporting Ultra-Reliable Low Latency Communications (URLLC). This work investigates how the packet error statistics from different interfaces impacts the overall reliability-latency characteristics. We use the simple Gilbert-Elliott model for burst errors and estimate its parameters based on experimental measurement traces from LTE and {Wi-Fi} packet transmissions collected over several days. The results show that using interface diversity configurations that include at least one {Wi-Fi} interface leads to, somewhat surprisingly, since Wi-Fi is generally less reliable than LTE, superior results in terms of packet success and error burst duration. Another interesting finding is that {Wi-Fi}-based interface diversity configurations outperform even ultra-reliable single links.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
Analysis of LoRaWAN Uplink with Multiple Demodulating Paths and Capture Effect
Authors:
René Brandborg Sørensen,
Nasrin Razmi,
Jimmy Jessen Nielsen,
Petar Popovski
Abstract:
Low power wide area networks (LPWANs), such as the ones based on the LoRaWAN protocol, are seen as enablers of large number of IoT applications and services. In this work, we assess the scalability of LoRaWAN by analyzing the frame success probability (FSP) of a LoRa frame while taking into account the capture effect and the number of parallel demodulation paths of the receiving gateway. We have b…
▽ More
Low power wide area networks (LPWANs), such as the ones based on the LoRaWAN protocol, are seen as enablers of large number of IoT applications and services. In this work, we assess the scalability of LoRaWAN by analyzing the frame success probability (FSP) of a LoRa frame while taking into account the capture effect and the number of parallel demodulation paths of the receiving gateway. We have based our model on the commonly used {SX1301 gateway chipset}, which is capable of demodulating {up to} eight frames simultaneously; however, the results of the model can be generalized to architectures with arbitrary number of demodulation paths. We have also introduced and investigated {three} policies for Spreading Factor (SF) allocation. Each policy is evaluated in terms of coverage {probability}, {FSP}, and {throughput}. The overall conclusion is that the presence of multiple demodulation paths introduces a significant change in the analysis and performance of the LoRa random access schemes.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Wireless Access in Ultra-Reliable Low-Latency Communication (URLLC)
Authors:
Petar Popovski,
Čedomir Stefanović,
Jimmy J. Nielsen,
Elisabeth de Carvalho,
Marko Angjelichinoski,
Kasper F. Trillingsgaard,
Alexandru-Sabin Bana
Abstract:
The future connectivity landscape and, notably, the 5G wireless systems will feature Ultra-Reliable Low Latency Communication (URLLC). The coupling of high reliability and low latency requirements in URLLC use cases makes the wireless access design very challenging, in terms of both the protocol design and of the associated transmission techniques. This paper aims to provide a broad perspective on…
▽ More
The future connectivity landscape and, notably, the 5G wireless systems will feature Ultra-Reliable Low Latency Communication (URLLC). The coupling of high reliability and low latency requirements in URLLC use cases makes the wireless access design very challenging, in terms of both the protocol design and of the associated transmission techniques. This paper aims to provide a broad perspective on the fundamental tradeoffs in URLLC as well as the principles used in building access protocols. Two specific technologies are considered in the context of URLLC: massive MIMO and multi-connectivity, also termed interface diversity. The paper also touches upon the important question of the proper statistical methodology for designing and assessing extremely high reliability levels.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Analysis of Latency and MAC-layer Performance for Class A LoRaWAN
Authors:
R. B. Sørensen,
D. M. Kim,
J. J. Nielsen,
P. Popovski
Abstract:
We propose analytical models that allow us to investigate the performance of long range wide area network (LoRaWAN) uplink in terms of latency, collision rate, and throughput under the constraints of the regulatory duty cycling, when assuming exponential inter-arrival times. Our models take into account sub-band selection and the case of sub-band combining. Our numerical evaluations consider speci…
▽ More
We propose analytical models that allow us to investigate the performance of long range wide area network (LoRaWAN) uplink in terms of latency, collision rate, and throughput under the constraints of the regulatory duty cycling, when assuming exponential inter-arrival times. Our models take into account sub-band selection and the case of sub-band combining. Our numerical evaluations consider specifically the European ISM band, but the analysis is applicable to any coherent band. Protocol simulations are used to validate the proposed models. We find that sub-band selection and combining have a large effect on the quality of service (QoS) experienced in an LoRaWAN cell for a given load. The proposed models allow for the optimization of resource allocation within a cell given a set of QoS requirements and a traffic model.
△ Less
Submitted 14 December, 2017;
originally announced December 2017.
-
Optimized Interface Diversity for Ultra-Reliable Low Latency Communication (URLLC)
Authors:
Jimmy J. Nielsen,
Rongkuan Liu,
Petar Popovski
Abstract:
An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use \emph{interface diversity} and integrate multiple communication interfaces, each interface based on a different technology. Our approach is to use coding to seamlessly distribute coded payload and redundancy…
▽ More
An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use \emph{interface diversity} and integrate multiple communication interfaces, each interface based on a different technology. Our approach is to use coding to seamlessly distribute coded payload and redundancy data across multiple available communication interfaces. We formulate an optimization problem to find the payload allocation weights that maximize the reliability at specific target latency values. By considering different scenarios, we find that optimized strategies can significantly outperform $k$-out-of-$n$ strategies, where the latter do not account for the characteristics of the different interfaces. Our approach is supported by experimental results.
△ Less
Submitted 14 December, 2017;
originally announced December 2017.
-
Ultra-Reliable Low Latency Communication (URLLC) using Interface Diversity
Authors:
Jimmy J. Nielsen,
Rongkuan Liu,
Petar Popovski
Abstract:
An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use interface diversity and integrate multiple communication interfaces, each interface based on a different technology. In this work, we propose to use coding to seamlessly distribute coded payload and redundanc…
▽ More
An important ingredient of the future 5G systems will be Ultra-Reliable Low-Latency Communication (URLLC). A way to offer URLLC without intervention in the baseband/PHY layer design is to use interface diversity and integrate multiple communication interfaces, each interface based on a different technology. In this work, we propose to use coding to seamlessly distribute coded payload and redundancy data across multiple available communication interfaces. We formulate an optimization problem to find the payload allocation weights that maximize the reliability at specific target latency values. In order to estimate the performance in terms of latency and reliability of such an integrated communication system, we propose an analysis framework that combines traditional reliability models with technology-specific latency probability distributions. Our model is capable to account for failure correlation among interfaces/technologies. By considering different scenarios, we find that optimized strategies can in some cases significantly outperform strategies based on $k$-out-of-$n$ erasure codes, where the latter do not account for the characteristics of the different interfaces. The model has been validated through simulation and is supported by experimental results.
△ Less
Submitted 21 November, 2017;
originally announced November 2017.
-
Network Slicing for Ultra-Reliable Low Latency Communication in Industry 4.0 Scenarios
Authors:
Anders Ellersgaard Kalør,
René Guillaume,
Jimmy Jessen Nielsen,
Andreas Mueller,
Petar Popovski
Abstract:
An important novelty of 5G is its role in transforming the industrial production into Industry 4.0. Specifically, Ultra-Reliable Low Latency Communications (URLLC) will, in many cases, enable replacement of cables with wireless connections and bring freedom in designing and operating interconnected machines, robots, and devices. However, not all industrial links will be of URLLC type; e.g. some ap…
▽ More
An important novelty of 5G is its role in transforming the industrial production into Industry 4.0. Specifically, Ultra-Reliable Low Latency Communications (URLLC) will, in many cases, enable replacement of cables with wireless connections and bring freedom in designing and operating interconnected machines, robots, and devices. However, not all industrial links will be of URLLC type; e.g. some applications will require high data rates. Furthermore, these industrial networks will be highly heterogeneous, featuring various communication technologies. We consider network slicing as a mechanism to handle the diverse set of requirements to the network. We present methods for slicing deterministic and packet-switched industrial communication protocols at an abstraction level that is decoupled from the specific implementation of the underlying technologies. Finally, we show how network calculus can be used to assess the end-to-end properties of the network slices.
△ Less
Submitted 30 August, 2017;
originally announced August 2017.
-
Wireless Access for Ultra-Reliable Low-Latency Communication (URLLC): Principles and Building Blocks
Authors:
Petar Popovski,
Jimmy J. Nielsen,
Cedomir Stefanovic,
Elisabeth de Carvalho,
Erik Ström,
Kasper F. Trillingsgaard,
Alexandru-Sabin Bana,
Dong Min Kim,
Radoslaw Kotaba,
Jihong Park,
René B. Sørensen
Abstract:
Ultra-reliable low latency communication (URLLC) is an important new feature brought by 5G, with a potential to support a vast set of applications that rely on mission-critical links. In this article, we first discuss the principles for supporting URLLC from the perspective of the traditional assumptions and models applied in communication/information theory. We then discuss how these principles a…
▽ More
Ultra-reliable low latency communication (URLLC) is an important new feature brought by 5G, with a potential to support a vast set of applications that rely on mission-critical links. In this article, we first discuss the principles for supporting URLLC from the perspective of the traditional assumptions and models applied in communication/information theory. We then discuss how these principles are applied in various elements of the system design, such as use of various diversity sources, design of packets and access protocols. The important messages are that there is a need to optimize the transmission of signaling information, as well as a need for a lean use of various sources of diversity.
△ Less
Submitted 20 December, 2017; v1 submitted 25 August, 2017;
originally announced August 2017.
-
Statistical Multiplexing of Computations in C-RAN with Tradeoffs in Latency and Energy
Authors:
Anders E. Kalør,
Mauricio I. Agurto,
Nuno K. Pratas,
Jimmy J. Nielsen,
Petar Popovski
Abstract:
In the Cloud Radio Access Network (C-RAN) architecture, the baseband signals from multiple remote radio heads are processed in a centralized baseband unit (BBU) pool. This architecture allows network operators to adapt the BBU's computational resources to the aggregate access load experienced at the BBU, which can change in every air-interface access frame. The degree of savings that can be achiev…
▽ More
In the Cloud Radio Access Network (C-RAN) architecture, the baseband signals from multiple remote radio heads are processed in a centralized baseband unit (BBU) pool. This architecture allows network operators to adapt the BBU's computational resources to the aggregate access load experienced at the BBU, which can change in every air-interface access frame. The degree of savings that can be achieved by adapting the resources is a tradeoff between savings, adaptation frequency, and increased queuing time. If the time scale for adaptation of the resource multiplexing is greater than the access frame duration, then this may result in additional access latency and limit the energy savings. In this paper we investigate the tradeoff by considering two extreme time-scales for the resource multiplexing: (i) long-term, where the computational resources are adapted over periods much larger than the access frame durations; (ii) short-term, where the adaption is below the access frame duration. We develop a general C-RAN queuing model that describes the access latency and show, for Poisson arrivals, that long-term multiplexing achieves savings comparable to short-term multiplexing, while offering low implementation complexity.
△ Less
Submitted 15 March, 2017;
originally announced March 2017.
-
Secure Real-Time Monitoring and Management of Smart Distribution Grid using Shared Cellular Networks
Authors:
Jimmy J. Nielsen,
Hervé Ganem,
Ljupco Jorguseski,
Kemal Alic,
Miha Smolnikar,
Ziming Zhu,
Nuno K. Pratas,
Michal Golinski,
Haibin Zhang,
Urban Kuhar,
Zhong Fan,
Ales Svigelj
Abstract:
The electricity production and distribution is facing two major changes. First, the production is shifting from classical energy sources such as coal and nuclear power towards renewable resources such as solar and wind. Secondly, the consumption in the low voltage grid is expected to grow significantly due to expected introduction of electrical vehicles. The first step towards more efficient opera…
▽ More
The electricity production and distribution is facing two major changes. First, the production is shifting from classical energy sources such as coal and nuclear power towards renewable resources such as solar and wind. Secondly, the consumption in the low voltage grid is expected to grow significantly due to expected introduction of electrical vehicles. The first step towards more efficient operational capabilities is to introduce an observability of the distribution system and allow for leveraging the flexibility of end connection points with manageable consumption, generation and storage capabilities. Thanks to the advanced measurement devices, management framework, and secure communication infrastructure developed in the FP7 SUNSEED project, the Distribution System Operator (DSO) now has full observability of the energy flows at the medium/low voltage grid. Furthermore, the prosumers are able to participate pro-actively and coordinate with the DSO and other stakeholders in the grid. The monitoring and management functionalities have strong requirements to the communication latency, reliability and security. This paper presents novel solutions and analyses of these aspects for the SUNSEED scenario, where the smart grid ICT solutions are provided through shared cellular LTE networks.
△ Less
Submitted 13 January, 2017;
originally announced January 2017.
-
Estimation of Received Signal Strength Distribution for Smart Meters with Biased Measurement Data Set
Authors:
Mathias Rønholt Kielgast,
Anders Charly Rasmussen,
Mathias Hjorth Laursen,
Jimmy Jessen Nielsen,
Petar Popovski,
Rasmus Krigslund
Abstract:
This letter presents an experimental study and a novel modelling approach of the wireless channel of smart utility meters placed in basements or sculleries. The experimental data consist of signal strength measurements of consumption report packets. Since such packets are only registered if they can be decoded by the receiver, the part of the signal strength distribution that falls below the recei…
▽ More
This letter presents an experimental study and a novel modelling approach of the wireless channel of smart utility meters placed in basements or sculleries. The experimental data consist of signal strength measurements of consumption report packets. Since such packets are only registered if they can be decoded by the receiver, the part of the signal strength distribution that falls below the receiver sensitivity threshold is not observable. We combine a Rician fading model with a bias function that captures the cut-off in the observed signal strength measurements. Two sets of experimental data are analysed. It is shown that the proposed method offers an approximation of the distribution of the signal strength measurements that is better than a naïve Rician fitting.
△ Less
Submitted 17 October, 2016;
originally announced October 2016.
-
Latency Analysis of Systems with Multiple Interfaces for Ultra-Reliable M2M Communication
Authors:
Jimmy J. Nielsen,
Petar Popovski
Abstract:
One of the ways to satisfy the requirements of ultra-reliable low latency communication for mission critical Machine-type Communications (MTC) applications is to integrate multiple communication interfaces. In order to estimate the performance in terms of latency and reliability of such an integrated communication system, we propose an analysis framework that combines traditional reliability model…
▽ More
One of the ways to satisfy the requirements of ultra-reliable low latency communication for mission critical Machine-type Communications (MTC) applications is to integrate multiple communication interfaces. In order to estimate the performance in terms of latency and reliability of such an integrated communication system, we propose an analysis framework that combines traditional reliability models with technology-specific latency probability distributions. In our proposed model we demonstrate how failure correlation between technologies can be taken into account. We show for the considered scenario with fiber and different cellular technologies how up to 5-nines reliability can be achieved and how packet splitting can be used to reduce latency substantially while kee** 4-nines reliability. The model has been validated through simulation.
△ Less
Submitted 7 May, 2016;
originally announced May 2016.
-
Assessment of LTE Wireless Access for Monitoring of Energy Distribution in the Smart Grid
Authors:
Germán C. Madueño,
Jimmy J. Nielsen,
Dong Min Kim,
Nuno K. Pratas,
Čedomir Stefanović,
Petar Popovski
Abstract:
While LTE is becoming widely rolled out for human-type services, it is also a promising solution for cost-efficient connectivity of the smart grid monitoring equipment. This is a type of machine-to-machine (M2M) traffic that consists mainly of sporadic uplink transmissions. In such a setting, the amount of traffic that can be served in a cell is not constrained by the data capacity, but rather by…
▽ More
While LTE is becoming widely rolled out for human-type services, it is also a promising solution for cost-efficient connectivity of the smart grid monitoring equipment. This is a type of machine-to-machine (M2M) traffic that consists mainly of sporadic uplink transmissions. In such a setting, the amount of traffic that can be served in a cell is not constrained by the data capacity, but rather by the signaling constraints in the random access channel and control channel. In this paper we explore these limitations using a detailed simulation of the LTE access reservation protocol (ARP). We find that 1) assigning more random access opportunities may actually worsen performance; and 2) the additional signaling that follows the ARP has very large impact on the capacity in terms of the number of supported devices; we observed a reduction in the capacity by almost a factor of 3. This suggests that a lightweight access method, with a reduced number of signaling messages, needs to be considered in standardization for M2M applications. Additionally we propose a tractable analytical model to calculate the outage that can be rapidly implemented and evaluated. The model accounts for the features of the random access, control channel and uplink and downlink data channels, as well as retransmissions.
△ Less
Submitted 30 November, 2015; v1 submitted 11 August, 2015;
originally announced August 2015.
-
A Tractable Model of the LTE Access Reservation Procedure for Machine-Type Communications
Authors:
Jimmy J. Nielsen,
Dong Min Kim,
Germán C. Madueño,
Nuno K. Pratas,
Petar Popovski
Abstract:
A canonical scenario in Machine-Type Communications (MTC) is the one featuring a large number of devices, each of them with sporadic traffic. Hence, the number of served devices in a single LTE cell is not determined by the available aggregate rate, but rather by the limitations of the LTE access reservation protocol. Specifically, the limited number of contention preambles and the limited amount…
▽ More
A canonical scenario in Machine-Type Communications (MTC) is the one featuring a large number of devices, each of them with sporadic traffic. Hence, the number of served devices in a single LTE cell is not determined by the available aggregate rate, but rather by the limitations of the LTE access reservation protocol. Specifically, the limited number of contention preambles and the limited amount of uplink grants per random access response are crucial to consider when dimensioning LTE networks for MTC. We propose a low-complexity model of LTE's access reservation protocol that encompasses these two limitations and allows us to evaluate the outage probability at click-speed. The model is based chiefly on closed-form expressions, except for the part with the feedback impact of retransmissions, which is determined by solving a fixed point equation. Our model overcomes the incompleteness of the existing models that are focusing solely on the preamble collisions. A comparison with the simulated LTE access reservation procedure that follows the 3GPP specifications, confirms that our model provides an accurate estimation of the system outage event and the number of supported MTC devices.
△ Less
Submitted 30 November, 2015; v1 submitted 7 May, 2015;
originally announced May 2015.
-
Location-Quality-aware Policy Optimisation for Relay Selection in Mobile Networks
Authors:
Jimmy J. Nielsen,
Rasmus L. Olsen,
Tatiana K. Madsen,
Bernard Uguen,
Hans-Peter Schwefel
Abstract:
Relaying can improve the coverage and performance of wireless access networks. In presence of a localisation system at the mobile nodes, the use of such location estimates for relay node selection can be advantageous as such information can be collected by access points in linear effort with respect to number of mobile nodes (while the number of links grows quadratically). However, the localisatio…
▽ More
Relaying can improve the coverage and performance of wireless access networks. In presence of a localisation system at the mobile nodes, the use of such location estimates for relay node selection can be advantageous as such information can be collected by access points in linear effort with respect to number of mobile nodes (while the number of links grows quadratically). However, the localisation error and the chosen update rate of location information in conjunction with the mobility model affect the performance of such location-based relay schemes; these parameters also need to be taken into account in the design of optimal policies. This paper develops a Markov model that can capture the joint impact of localisation errors and inaccuracies of location information due to forwarding delays and mobility; the Markov model is used to develop algorithms to determine optimal location-based relay policies that take the aforementioned factors into account. The model is subsequently used to analyse the impact of deployment parameter choices on the performance of location-based relaying in WLAN scenarios with free-space propagation conditions and in an measurement-based indoor office scenario.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
What Can Wireless Cellular Technologies Do about the Upcoming Smart Metering Traffic?
Authors:
Jimmy J. Nielsen,
Germán C. Madueño,
Nuno K. Pratas,
René B. Sørensen,
Čedomir Stefanović,
Petar Popovski
Abstract:
The introduction of smart electricity meters with cellular radio interface puts an additional load on the wireless cellular networks. Currently, these meters are designed for low duty cycle billing and occasional system check, which generates a low-rate sporadic traffic. As the number of distributed energy resources increases, the household power will become more variable and thus unpredictable fr…
▽ More
The introduction of smart electricity meters with cellular radio interface puts an additional load on the wireless cellular networks. Currently, these meters are designed for low duty cycle billing and occasional system check, which generates a low-rate sporadic traffic. As the number of distributed energy resources increases, the household power will become more variable and thus unpredictable from the viewpoint of the Distribution System Operator (DSO). It is therefore expected, in the near future, to have an increased number of Wide Area Measurement System (WAMS) devices with Phasor Measurement Unit (PMU)-like capabilities in the distribution grid, thus allowing the utilities to monitor the low voltage grid quality while providing information required for tighter grid control. From a communication standpoint, the traffic profile will change drastically towards higher data volumes and higher rates per device. In this paper, we characterize the current traffic generated by smart electricity meters and supplement it with the potential traffic requirements brought by introducing enhanced Smart Meters, i.e., meters with PMU-like capabilities. Our study shows how GSM/GPRS and LTE cellular system performance behaves with the current and next generation smart meters traffic, where it is clearly seen that the PMU data will seriously challenge these wireless systems. We conclude by highlighting the possible solutions for upgrading the cellular standards, in order to cope with the upcoming smart metering traffic.
△ Less
Submitted 1 July, 2015; v1 submitted 4 February, 2015;
originally announced February 2015.
-
Interference Spins: Scheduling of Multiple Interfering Two-Way Wireless Links
Authors:
Petar Popovski,
Osvaldo Simeone,
Jimmy J. Nielsen,
Čedomir Stefanović
Abstract:
Two-way is a dominant mode of communication in wireless systems. Departing from the tradition to optimize each transmission direction separately, recent work has demonstrated that, for time-division duplex (TDD) systems, optimizing the schedule of the two transmission directions depending on traffic load and interference condition leads to performance gains. In this letter, a general network of mu…
▽ More
Two-way is a dominant mode of communication in wireless systems. Departing from the tradition to optimize each transmission direction separately, recent work has demonstrated that, for time-division duplex (TDD) systems, optimizing the schedule of the two transmission directions depending on traffic load and interference condition leads to performance gains. In this letter, a general network of multiple interfering two-way links is studied under the assumption of a balanced load in the two directions for each link. Using the notion of interference spin, we introduce an algebraic framework for the optimization of two-way scheduling, along with an efficient optimization algorithm that is based on the pruning of a properly defined topology graph and dynamic programming. Numerical results demonstrate multi-fold rate gains with respect to baseline solutions, especially for worst-case (5%-ile) rates.
△ Less
Submitted 4 February, 2015; v1 submitted 6 January, 2015;
originally announced January 2015.