-
Phonon-induced band gap renormalization by dielectric dependent global hybrid density functional tight-binding
Authors:
Tammo van der Heide,
Ben Hourahine,
Bálint Aradi,
Thomas Frauenheim,
Thomas A. Niehaus
Abstract:
Accurate electronic bandstructures of solids are indispensable for a wide variety of applications and should provide a sound prediction of phonon-induced band gap renormalization at finite temperatures. We employ our previously introduced formalism of general hybrid functionals within the approximate density functional method, DFTB, to present first insights into the accuracy of temperature depend…
▽ More
Accurate electronic bandstructures of solids are indispensable for a wide variety of applications and should provide a sound prediction of phonon-induced band gap renormalization at finite temperatures. We employ our previously introduced formalism of general hybrid functionals within the approximate density functional method, DFTB, to present first insights into the accuracy of temperature dependent band gaps obtained by a dielectric-dependent global hybrid functional. The work targets the prototypical group-IV semiconductors diamond and silicon. Following Zacharias et al. [Phys. Rev. Lett. 115, 177401 (2015)], we sample the nuclear wave function by stochastic Monte-Carlo integration as well as the deterministic one-shot procedure [Phys. Rev. B 94, 075125 (2016)] derived from it. The computational efficiency of DFTB enables us to further compare these approaches, which fully take nuclear quantum effects into account, with classical Born-Oppenheimer molecular dynamic (BOMD) simulations. While the quantum mechanical treatments of Zacharias et al. yield band gaps in good agreement with experiment, calculations based on BOMD snapshots inadequately describe the renormalization effect at low temperatures. We demonstrate the importance of properly incorporating nuclear quantum effects by adapting the stochastic approach to normal amplitudes that arise from the classical equipartition principle. For low temperatures the results thus obtained closely resemble the BOMD predictions, while anharmonic effects become important beyond $500\,\mathrm{K}$. Comparisons between DFTB parametrized from semi-local DFT, and global hybrid DFTB, suggest that Fock-type exchange systematically yields a slightly more pronounced electron-phonon interaction, hence stronger gap renormalization and zero-point corrections.
△ Less
Submitted 21 March, 2024;
originally announced March 2024.
-
THz to far-infrared spectra of the known crystal polymorphs of Phenylalanine
Authors:
Thomas A. Niehaus,
Emilien Prost,
Vincent Loriot,
Franck Lépine,
Luc Bergé,
Stefan Skupin
Abstract:
There is renewed interest in the structure of the essential amino acid Phenylalanine in the solid state. Three new polymorphs were found in the years 2012 to 2014. Here, we investigate the structure, stability, and energetical ordering of these phases using first-principles simulations at the level of Density Functional Theory incorporating van-der-Waals interactions. Two of the distinct crystal f…
▽ More
There is renewed interest in the structure of the essential amino acid Phenylalanine in the solid state. Three new polymorphs were found in the years 2012 to 2014. Here, we investigate the structure, stability, and energetical ordering of these phases using first-principles simulations at the level of Density Functional Theory incorporating van-der-Waals interactions. Two of the distinct crystal forms are found to be structurally similar and energetically very close after vibrational free energy corrections have been taken into account. Infrared absorption spectra are likewise calculated and compared to experimental measurements. By combining measurements obtained with a commercial Fourier Transform Infra-Red spectrometer and a homemade air-photonics-based THz Time Domain spectrometer, we could carry out this comparison in the vibrational frequency region from 1 to 40~THz. The excellent agreement of the line positions and the established energy ranking allow us to identify the most stable polymorph of Phenylalanine.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Hybrid functionals for periodic systems in the density functional tight-binding method
Authors:
Tammo van der Heide,
Bálint Aradi,
Ben Hourahine,
Thomas Frauenheim,
Thomas A. Niehaus
Abstract:
Screened range-separated hybrid (SRSH) functionals within generalized Kohn-Sham density functional theory (GKS-DFT) have been shown to restore a general $1/(r\varepsilon)$ asymptotic decay of the electrostatic interaction in dielectric environments. Major achievements of SRSH include an improved description of optical properties of solids and correct prediction of polarization-induced fundamental…
▽ More
Screened range-separated hybrid (SRSH) functionals within generalized Kohn-Sham density functional theory (GKS-DFT) have been shown to restore a general $1/(r\varepsilon)$ asymptotic decay of the electrostatic interaction in dielectric environments. Major achievements of SRSH include an improved description of optical properties of solids and correct prediction of polarization-induced fundamental gap renormalization in molecular crystals. The density functional tight-binding method (DFTB) is an approximate DFT that bridges the gap between first principles methods and empirical electronic structure schemes. While purely long-range corrected RSH are already accessible within DFTB for molecular systems, this work generalizes the theoretical foundation to also include screened range-separated hybrids, with conventional pure hybrid functionals as a special case. The presented formulation and implementation is also valid for periodic boundary conditions (PBC) beyond the $Γ$-point. To treat periodic Fock exchange and its integrable singularity in reciprocal space, we resort to techniques successfully employed by DFT, in particular a truncated Coulomb operator and the minimum image convention. Starting from the first principles Hartree-Fock operator, we derive suitable expressions for the DFTB method, using standard integral approximations and their efficient implementation in the DFTB+ software package. Convergence behavior is investigated and demonstrated for the polyacene series as well as two- and three-dimensional materials. Benzene and pentacene molecular and crystalline systems show the correct polarization-induced gap renormalization by SRSH-DFTB at heavily reduced computational cost compared to first principles methods.
△ Less
Submitted 23 June, 2023; v1 submitted 24 February, 2023;
originally announced February 2023.
-
Interplay of electron and phonon channels in the refrigeration through molecular junctions
Authors:
Fatemeh Tabatabaei,
Samy Merabia,
Bernd Gotsmann,
Mika Prunnila,
Thomas A. Niehaus
Abstract:
Due to their structured density of states, molecular junctions provide rich resources to filter and control the flow of electrons and phonons. Here we compute the out of equilibrium current-voltage characteristics and dissipated heat of some recently synthesized oligophenylenes (OPE3) using the Density Functional based Tight-Binding (DFTB) method within Non-Equilibrium Green's Function Theory (NEG…
▽ More
Due to their structured density of states, molecular junctions provide rich resources to filter and control the flow of electrons and phonons. Here we compute the out of equilibrium current-voltage characteristics and dissipated heat of some recently synthesized oligophenylenes (OPE3) using the Density Functional based Tight-Binding (DFTB) method within Non-Equilibrium Green's Function Theory (NEGF). We analyze the Peltier cooling power for these molecular junctions as function of a bias voltage and investigate the parameters that lead to optimal cooling performance. In order to quantify the attainable temperature reduction, an electro-thermal circuit model is presented, in which the key electronic and thermal transport parameters enter. Overall, our results demonstrate that the studied OPE3 devices are compatible with temperature reductions of several K. Based on the results, some strategies to enable high performance devices for cooling applications are briefly discussed.
△ Less
Submitted 27 January, 2022;
originally announced January 2022.
-
Critical assessment of machine-learned repulsive potentials for the Density Functional based Tight-Binding method: a case study for pure silicon
Authors:
Dylan Bissuel,
Tristan Albaret,
Thomas A. Niehaus
Abstract:
We investigate the feasability of improving the semi-empirical density functional based tight-binding method (DFTB) through a general and transferable many-body repulsive potential for pure silicon using a common machine-learning framework. Atomic environments using atom centered symmetry functions fed into flexible high-dimensional neural-networks allow to overcome the limited pair potentials use…
▽ More
We investigate the feasability of improving the semi-empirical density functional based tight-binding method (DFTB) through a general and transferable many-body repulsive potential for pure silicon using a common machine-learning framework. Atomic environments using atom centered symmetry functions fed into flexible high-dimensional neural-networks allow to overcome the limited pair potentials used until now, with the ability to train simultaneously on a large variety of systems. We achieve an improvement on bulk systems, with good performance on energetic, vibrational and structural properties. Contrarily, there are difficulties for clusters due to surface effects. To deepen the discussion, we also put these results into perspective with two fully machine-learned numerical potentials for silicon from the literature. This allows us to identify both the transferability of such approaches together with the impact of narrowing the role of machine-learning models to reproduce only a part of the total energy.
△ Less
Submitted 7 December, 2021;
originally announced December 2021.
-
Ground-to-excited derivative couplings for the density functional based tight-binding method: Semi-local and long-range corrected formulations
Authors:
Thomas A. Niehaus
Abstract:
A derivation of non-adiabatic coupling vectors for the density functional based tight binding method (DFTB) between ground and excited states is presented. The analytical result is valid both for semi-local and long-range corrected DFTB and includes all required Pulay terms. Electron-translation factors lead to a conceptual simplification of the Slater-Koster scheme for precomputed integrals. Comp…
▽ More
A derivation of non-adiabatic coupling vectors for the density functional based tight binding method (DFTB) between ground and excited states is presented. The analytical result is valid both for semi-local and long-range corrected DFTB and includes all required Pulay terms. Electron-translation factors lead to a conceptual simplification of the Slater-Koster scheme for precomputed integrals. Compared to scalar couplings obtained from numerical derivatives, the present approach is computationally more efficient and can be applied to systems with hundreds of atoms. The accuracy of DFTB derivative couplings is assessed by comparison to full density functional theory (DFT) calculations using semi-local and hybrid exchange-correlation functionals with promising results. As exemplified by a case study of furan, DFTB provides non-adiabatic coupling vectors that are close to DFT counterparts in size and direction also in the vicinity of conical intersections.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Towards a simplified description of thermoelectric materials: Accuracy of approximate density functional theory for phonon dispersions
Authors:
Thomas A. Niehaus,
Sigismund T. A. G. Melissen,
Balint Aradi,
S. Mehdi Vaez Allaei
Abstract:
We calculate the phonon-dispersion relations of several two-dimensional materials and diamond using the density-functional based tight-binding approach (DFTB). Our goal is to verify if this numerically efficient method provides sufficiently accurate phonon frequencies and group velocities to compute reliable thermoelectric properties. To this end, the results are compared to available DFT results…
▽ More
We calculate the phonon-dispersion relations of several two-dimensional materials and diamond using the density-functional based tight-binding approach (DFTB). Our goal is to verify if this numerically efficient method provides sufficiently accurate phonon frequencies and group velocities to compute reliable thermoelectric properties. To this end, the results are compared to available DFT results and experimental data. To quantify the accuracy for a given band, a descriptor is introduced that summarizes contributions to the lattice conductivity that are available already in the harmonic approximation. We find that the DFTB predictions depend strongly on the employed repulsive pair-potentials, which are an important prerequisite of this method. For carbon-based materials, accurate pair-potentials are identified and lead to errors of the descriptor that are of the same order as differences between different local and semi-local DFT approaches.
△ Less
Submitted 2 May, 2019; v1 submitted 15 April, 2019;
originally announced April 2019.
-
Stacking dependence of carrier transport properties in multilayered black phosphorous
Authors:
A. Sengupta,
M. Audiffred,
T. Heine,
T. A. Niehaus
Abstract:
We present the effect of different stacking orders on carrier transport properties of multi-layer black phosphorous. We consider three different stacking orders AAA, ABA and ACA, with increasing number of layers (from 2 to 6 layers). We employ a hierarchical approach in density functional theory (DFT), with structural simulations performed with Generalized Gradient Approximation (GGA) and the band…
▽ More
We present the effect of different stacking orders on carrier transport properties of multi-layer black phosphorous. We consider three different stacking orders AAA, ABA and ACA, with increasing number of layers (from 2 to 6 layers). We employ a hierarchical approach in density functional theory (DFT), with structural simulations performed with Generalized Gradient Approximation (GGA) and the bandstructure, carrier effective masses and optical properties evaluated with the Meta-Generalized Gradient Approximation (MGGA). The carrier transmission in the various black phosphorous sheets was carried out with the non-equilibrium Greens function (NEGF) approach. The results show that ACA stacking has the highest electron and hole transmission probabilities. The results show tunability for a wide range of band-gap, carrier effective masses and transmission with a great promise for lattice engineering (stacking order and layers) in black phosphorous.
△ Less
Submitted 17 November, 2015; v1 submitted 20 August, 2015;
originally announced August 2015.
-
Implementation and benchmark of a long-range corrected functional in the density functional based tight-binding method
Authors:
Vitalij Lutsker,
Balint Aradi,
Thomas A. Niehaus
Abstract:
Bridging the gap between first principles methods and empirical schemes, the density functional based tight-binding method (DFTB) has become a versatile tool in predictive atomistic simulations over the past years. One of the major restrictions of this method is the limitation to local or gradient corrected exchange-correlation functionals. This excludes the important class of hybrid or long-range…
▽ More
Bridging the gap between first principles methods and empirical schemes, the density functional based tight-binding method (DFTB) has become a versatile tool in predictive atomistic simulations over the past years. One of the major restrictions of this method is the limitation to local or gradient corrected exchange-correlation functionals. This excludes the important class of hybrid or long-range corrected functionals, which are advantageous in thermochemistry, as well as in the computation of vibrational, photoelectron and optical spectra. The present work provides a detailed account of the implementation of DFTB for a long-range corrected functional in generalized Kohn-Sham theory. We apply the method to a set of organic molecules and compare ionization potentials and electron affinities with the original DFTB method and higher level theory. The new scheme cures the significant overpolarization in electric fields found for local DFTB, which parallels the functional dependence in first principles density functional theory (DFT). At the same time the computational savings with respect to full DFT calculations are not compromised as evidenced by numerical benchmark data.
△ Less
Submitted 1 April, 2015;
originally announced April 2015.
-
Effect of line defects on the electrical transport properties of monolayer MoS$_{2}$ sheet
Authors:
Amretashis Sengupta,
Dipankar Saha,
Thomas A. Niehaus,
Santanu Mahapatra
Abstract:
We present a computational study on the impact of line defects on the electronic properties of monolayer MoS2. Four different kinds of line defects with Mo and S as the bridging atoms, consistent with recent theoretical and experimental observations are considered herein. We employ the density functional tight-binding (DFTB) method with a Slater-Koster type DFTB-CP2K basis set for evaluating the m…
▽ More
We present a computational study on the impact of line defects on the electronic properties of monolayer MoS2. Four different kinds of line defects with Mo and S as the bridging atoms, consistent with recent theoretical and experimental observations are considered herein. We employ the density functional tight-binding (DFTB) method with a Slater-Koster type DFTB-CP2K basis set for evaluating the material properties of perfect and the various defective MoS2 sheets. The transmission spectra is computed with a DFTB-Non-Equilibrium Greens Function (NEGF) formalism. We also perform a detailed analysis of the carrier transmission pathways under a small bias and investigate the phase shifts in the transmission eigenstates of the defective MoS2 sheets. Our simulations show a 2-4 folds decrease in carrier conductance of MoS2 sheets in the presence of line defects as compared to that for the perfect sheet.
△ Less
Submitted 1 August, 2014; v1 submitted 18 January, 2014;
originally announced January 2014.
-
Spatial extension of excitons in triphenylene based polymers given by range-separated functionals
Authors:
B. Kociper,
T. A. Niehaus
Abstract:
Motivated by an experiment in which the singlet-triplet gap in triphenylene based copolymers was effectively tuned, we used time dependent density functional theory (TDDFT) to reproduce the main results. By means of conventional and long-range corrected exchange correlation functionals, the luminescence energies and the exciton localization were calculated for a triphenylene homopolymer and severa…
▽ More
Motivated by an experiment in which the singlet-triplet gap in triphenylene based copolymers was effectively tuned, we used time dependent density functional theory (TDDFT) to reproduce the main results. By means of conventional and long-range corrected exchange correlation functionals, the luminescence energies and the exciton localization were calculated for a triphenylene homopolymer and several different copolymers. The phosphorescence energy of the pure triphenylene chain is predicted accurately by means of the optimally tuned long-range corrected LC-PBE functional and slightly less accurate by the global hybrid B3LYP. However, the experimentally observed fixed phosphorescence energy could not be reproduced because the localization pattern is different to the expectations: Instead of localizing on the triphenylene moiety - which is present in all types of polymers - the triplet state localizes on the different bridging units in the TDDFT calculations. This leads to different triplet emission energies for each type of polymer. Yet, there are clear indications that long-range corrected TDDFT has the potential to predict the triplet emission energies as well as the localization behavior more accurate than conventional local or semi-local functionals.
△ Less
Submitted 5 August, 2013;
originally announced August 2013.
-
Higher harmonics and ac transport from time dependent density functional theory
Authors:
Christian Oppenländer,
Björn Korff,
Thomas A. Niehaus
Abstract:
We report on dynamical quantum transport simulations for realistic molecular devices based on an approximate formulation of time-dependent Density Functional Theory with open boundary conditions. The method allows for the computation of various properties of junctions that are driven by alternating bias voltages. Besides the ac conductance for hexene connected to gold leads via thiol anchoring gro…
▽ More
We report on dynamical quantum transport simulations for realistic molecular devices based on an approximate formulation of time-dependent Density Functional Theory with open boundary conditions. The method allows for the computation of various properties of junctions that are driven by alternating bias voltages. Besides the ac conductance for hexene connected to gold leads via thiol anchoring groups, we also investigate higher harmonics in the current for a benzenedithiol device. Comparison to a classical quasi-static model reveals that quantum effects may become important already for small ac bias and that the full dynamical simulations exhibit a much lower number of higher harmonics. Current rectification is also briefly discussed.
△ Less
Submitted 16 May, 2013;
originally announced May 2013.
-
Atomistic modeling of dynamical quantum transport
Authors:
Christian Oppenländer,
Björn Korff,
Thomas Frauenheim,
Thomas A. Niehaus
Abstract:
We present dynamical transport calculations based on a tight-binding approximation to adiabatic time-dependent density functional theory (TD-DFTB). The reduced device density matrix is propagated through the Liouville-von Neumann equation. For the model system, 1,4-benzenediol coupled to aluminum leads, we are able to confirm the equality of the steady state current resulting from a time-dependent…
▽ More
We present dynamical transport calculations based on a tight-binding approximation to adiabatic time-dependent density functional theory (TD-DFTB). The reduced device density matrix is propagated through the Liouville-von Neumann equation. For the model system, 1,4-benzenediol coupled to aluminum leads, we are able to confirm the equality of the steady state current resulting from a time-dependent calculation to a static calculation in the conventional Landauer framework. We also investigate the response of the junction subjected to alternating bias voltages with frequencies up to the optical regime. Here we can clearly identify capacitive behaviour of the molecular device and a significant resonant enhancement of the conductance. The results are interpreted using an analytical single level model comparing the device transmission and admittance. In order to aid future calculations under alternating bias, we shortly review the use of Fourier transform techniques to obtain the full frequency response of the device from a single current trace.
△ Less
Submitted 29 April, 2013; v1 submitted 15 April, 2013;
originally announced April 2013.
-
Extensions of the time-dependent density functional based tight-binding approach
Authors:
A. Domínguez,
B. Aradi,
T. Frauenheim,
V. Lutsker,
T. A. Niehaus
Abstract:
The time-dependent density functional based tight-binding (TD-DFTB) approach is generalized to account for fractional occupations. In addition, an on-site correction leads to marked qualitative and quantitative improvements over the original method. Especially, the known failure of TD-DFTB for the description of σ-> π* and n -> π* excitations is overcome. Benchmark calculations on a large set of o…
▽ More
The time-dependent density functional based tight-binding (TD-DFTB) approach is generalized to account for fractional occupations. In addition, an on-site correction leads to marked qualitative and quantitative improvements over the original method. Especially, the known failure of TD-DFTB for the description of σ-> π* and n -> π* excitations is overcome. Benchmark calculations on a large set of organic molecules also indicate a better description of triplet states. The accuracy of the revised TD-DFTB method is found to be similar to first principles TD-DFT calculations at a highly reduced computational cost. As a side issue, we also discuss the generalization of the TD-DFTB method to spin-polarized systems. In contrast to an earlier study [Trani et al., JCTC 7 3304 (2011)], we obtain a formalism that is fully consistent with the use of local exchange-correlation functionals in the ground state DFTB method.
△ Less
Submitted 14 February, 2013;
originally announced February 2013.
-
Range separated functionals in the density functional based tight binding method: Formalism
Authors:
Thomas A. Niehaus,
Fabio Della Sala
Abstract:
A generalization of the density-functional based tight-binding method (DFTB) for the use with range-separated exchange-correlation functionals is presented. It is based on the Generalized Kohn-Sham (GKS) formalism and employs the density matrix as basic variable in the expansion of the energy functional, in contrast to the traditional DFTB scheme. The GKS-TB equations are derived and appropriate i…
▽ More
A generalization of the density-functional based tight-binding method (DFTB) for the use with range-separated exchange-correlation functionals is presented. It is based on the Generalized Kohn-Sham (GKS) formalism and employs the density matrix as basic variable in the expansion of the energy functional, in contrast to the traditional DFTB scheme. The GKS-TB equations are derived and appropriate integral approximations are discussed in detail. Implementation issues and numerical aspects of the new scheme are also covered.
△ Less
Submitted 8 November, 2011;
originally announced November 2011.
-
An efficient method for quantum transport simulations in the time domain
Authors:
Y. Wang,
C. -Y. Yam,
G. H. Chen,
Th. Frauenheim,
T. A. Niehaus
Abstract:
An approximate method based on adiabatic time dependent density functional theory (TDDFT) is presented, that allows for the description of the electron dynamics in nanoscale junctions under arbitrary time dependent external potentials. In this scheme, the density matrix of the device region is propagated according to the Liouville-von Neumann equation. The semi-infinite leads give rise to dissipat…
▽ More
An approximate method based on adiabatic time dependent density functional theory (TDDFT) is presented, that allows for the description of the electron dynamics in nanoscale junctions under arbitrary time dependent external potentials. In this scheme, the density matrix of the device region is propagated according to the Liouville-von Neumann equation. The semi-infinite leads give rise to dissipative terms in the equation of motion which are calculated from first principles in the wide band limit. In contrast to earlier {\em ab-initio} implementations of this formalism, the Hamiltonian is here approximated by a density expansion in the spirit of the density functional based tight-binding (DFTB) method without introducing empirical parameters. Results are presented for two prototypical molecular devices and compared to calculations at the full TDDFT level. The issue of non-existence of a steady state under certain conditions is also briefly touched on.
△ Less
Submitted 31 January, 2011;
originally announced January 2011.
-
Time-dependent versus static quantum transport simulations beyond linear response
Authors:
ChiYung Yam,
Xiao Zheng,
GuanHua Chen,
Yong Wang,
Thomas Frauenheim,
Thomas A. Niehaus
Abstract:
To explore whether the density-functional theory non-equilibrium Green's function formalism (DFT-NEGF) provides a rigorous framework for quantum transport, we carried out time-dependent density functional theory (TDDFT) calculations of the transient current through two realistic molecular devices, a carbon chain and a benzenediol molecule inbetween two aluminum electrodes. The TDDFT simulations fo…
▽ More
To explore whether the density-functional theory non-equilibrium Green's function formalism (DFT-NEGF) provides a rigorous framework for quantum transport, we carried out time-dependent density functional theory (TDDFT) calculations of the transient current through two realistic molecular devices, a carbon chain and a benzenediol molecule inbetween two aluminum electrodes. The TDDFT simulations for the steady state current exactly reproduce the results of fully self-consistent DFT-NEGF calculations even beyond linear response. In contrast, sizable differences are found with respect to an equilibrium, non-self-consistent treatment which are related here to differences in the Kohn-Sham and fully interacting susceptibility of the device region. Moreover, earlier analytical conjectures on the equivalence of static and time-dependent approaches in the low bias regime are confirmed with high numerical precision.
△ Less
Submitted 4 January, 2011;
originally announced January 2011.
-
Atomistic simulations of self-trapped exciton formation in silicon nanostructures: The transition from quantum dots to nanowires
Authors:
Y. Wang,
R. Q. Zhang,
Th. Frauenheim,
T. A. Niehaus
Abstract:
Using an approximate time-dependent density functional theory method, we calculate the absorption and luminescence spectra for hydrogen passivated silicon nanoscale structures with large aspect ratio. The effect of electron confinement in axial and radial directions is systematically investigated. Excited state relaxation leads to significant Stokes shifts for short nanorods with lengths less th…
▽ More
Using an approximate time-dependent density functional theory method, we calculate the absorption and luminescence spectra for hydrogen passivated silicon nanoscale structures with large aspect ratio. The effect of electron confinement in axial and radial directions is systematically investigated. Excited state relaxation leads to significant Stokes shifts for short nanorods with lengths less than 2 nm, but has little effect on the luminescence intensity. The formation of self-trapped excitons is likewise observed for short nanostructures only; longer wires exhibit fully delocalized excitons with neglible geometrical distortion at the excited state minimum.
△ Less
Submitted 28 April, 2009; v1 submitted 17 March, 2009;
originally announced March 2009.
-
Brief review related to the foundations of time-dependent density functional theory
Authors:
Thomas A. Niehaus,
Norman H. March
Abstract:
The electron density $n(\rb,t)$, which is the central tool of time-dependent density functional theory, is presently considered to be derivable from a one-body time-dependent potential $V(\rb,t)$, via one-electron wave functions satisfying a time- dependent Schrödinger equation. This is here related via a generalized equation of motion to a Dirac density matrix now involving $t$. Linear response…
▽ More
The electron density $n(\rb,t)$, which is the central tool of time-dependent density functional theory, is presently considered to be derivable from a one-body time-dependent potential $V(\rb,t)$, via one-electron wave functions satisfying a time- dependent Schrödinger equation. This is here related via a generalized equation of motion to a Dirac density matrix now involving $t$. Linear response theory is then surveyed, with a special emphasis on the question of causality with respect to the density dependence of the potential. Extraction of $V(\rb,t)$ for solvable models is also proposed.
△ Less
Submitted 28 April, 2009; v1 submitted 10 July, 2008;
originally announced July 2008.
-
Efficient evaluation of the Fourier Transform over products of Slater-type orbitals on different centers
Authors:
T. A. Niehaus,
R. López,
J. F. Rico
Abstract:
Using the shift-operator technique, a compact formula for the Fourier transform of a product of two Slater-type orbitals located on different atomic centers is derived. The result is valid for arbitrary quantum numbers and was found to be numerically stable for a wide range of geometrical parameters and momenta. Details of the implementation are presented together with benchmark data for represe…
▽ More
Using the shift-operator technique, a compact formula for the Fourier transform of a product of two Slater-type orbitals located on different atomic centers is derived. The result is valid for arbitrary quantum numbers and was found to be numerically stable for a wide range of geometrical parameters and momenta. Details of the implementation are presented together with benchmark data for representative integrals. We also discuss the assets and drawbacks of alternative algorithms available and analyze the numerical efficiency of the new scheme.
△ Less
Submitted 1 August, 2008; v1 submitted 26 March, 2008;
originally announced March 2008.
-
Resonant electron heating and molecular phonon cooling in single C$_{60}$ junctions
Authors:
G. Schulze,
K. J. Franke,
A. Gagliardi,
G. Romano,
C. S. Lin,
A. Da Rosa,
T. A. Niehaus,
Th. Frauenheim,
A. Di Carlo,
A. Pecchia,
J. I. Pascual
Abstract:
We study heating and heat dissipation of a single \c60 molecule in the junction of a scanning tunneling microscope (STM) by measuring the electron current required to thermally decompose the fullerene cage. The power for decomposition varies with electron energy and reflects the molecular resonance structure. When the STM tip contacts the fullerene the molecule can sustain much larger currents.…
▽ More
We study heating and heat dissipation of a single \c60 molecule in the junction of a scanning tunneling microscope (STM) by measuring the electron current required to thermally decompose the fullerene cage. The power for decomposition varies with electron energy and reflects the molecular resonance structure. When the STM tip contacts the fullerene the molecule can sustain much larger currents. Transport simulations explain these effects by molecular heating due to resonant electron-phonon coupling and molecular cooling by vibrational decay into the tip upon contact formation.
△ Less
Submitted 10 March, 2008;
originally announced March 2008.
-
Dynamical generalization of a solvable family of two-electron model atoms with general interparticle repulsion
Authors:
T. A. Niehaus,
S. Suhai,
N. H. March
Abstract:
Holas, Howard and March [Phys. Lett. A {\bf 310}, 451 (2003)] have obtained analytic solutions for ground-state properties of a whole family of two-electron spin-compensated harmonically confined model atoms whose different members are characterized by a specific interparticle potential energy u($r_{12}$). Here, we make a start on the dynamic generalization of the harmonic external potential, th…
▽ More
Holas, Howard and March [Phys. Lett. A {\bf 310}, 451 (2003)] have obtained analytic solutions for ground-state properties of a whole family of two-electron spin-compensated harmonically confined model atoms whose different members are characterized by a specific interparticle potential energy u($r_{12}$). Here, we make a start on the dynamic generalization of the harmonic external potential, the motivation being the serious criticism levelled recently against the foundations of time-dependent density-functional theory (e.g. [J. Schirmer and A. Dreuw, Phys. Rev. A {\bf 75}, 022513 (2007)]). In this context, we derive a simplified expression for the time-dependent electron density for arbitrary interparticle interaction, which is fully determined by an one-dimensional non-interacting Hamiltonian. Moreover, a closed solution for the momentum space density in the Moshinsky model is obtained.
△ Less
Submitted 30 October, 2007; v1 submitted 10 August, 2007;
originally announced August 2007.
-
Influence of copper on the electronic properties of amorphous chalcogenides
Authors:
S. I. Simdyankin,
M. Elstner,
T. A. Niehaus,
Th. Frauenheim,
S. R. Elliott
Abstract:
We have studied the influence of alloying copper with amorphous arsenic sulfide on the electronic properties of this material. In our computer-generated models, copper is found in two-fold near-linear and four-fold square-planar configurations, which apparently correspond to Cu(I) and Cu(II) oxidation states. The number of overcoordinated atoms, both arsenic and sulfur, grows with increasing con…
▽ More
We have studied the influence of alloying copper with amorphous arsenic sulfide on the electronic properties of this material. In our computer-generated models, copper is found in two-fold near-linear and four-fold square-planar configurations, which apparently correspond to Cu(I) and Cu(II) oxidation states. The number of overcoordinated atoms, both arsenic and sulfur, grows with increasing concentration of copper. Overcoordinated sulfur is found in trigonal planar configuration, and overcoordinated (four-fold) arsenic is in tetrahedral configuration. Addition of copper suppresses the localization of lone-pair electrons on chalcogen atoms, and localized states at the top of the valence band are due to Cu 3d orbitals. Evidently, these additional Cu states, which are positioned at the same energies as the states due to ([As4]-)-([S_3]+) pairs, are responsible for masking photodarkening in Cu chalcogenides.
△ Less
Submitted 8 April, 2005;
originally announced April 2005.
-
Importance of electronic self-consistency in the TDDFT based treatment of nonadiabatic molecular dynamics
Authors:
T. A. Niehaus,
D. Heringer,
B. Torralva,
Th. Frauenheim
Abstract:
A mixed quantum-classical approach to simulate the coupled dynamics of electrons and nuclei in nanoscale molecular systems is presented. The method relies on a second order expansion of the Lagrangian in time-dependent density functional theory (TDDFT) around a suitable reference density. We show that the inclusion of the second order term renders the method a self-consistent scheme and improves…
▽ More
A mixed quantum-classical approach to simulate the coupled dynamics of electrons and nuclei in nanoscale molecular systems is presented. The method relies on a second order expansion of the Lagrangian in time-dependent density functional theory (TDDFT) around a suitable reference density. We show that the inclusion of the second order term renders the method a self-consistent scheme and improves the calculated optical spectra of molecules by a proper treatment of the coupled response. In the application to ion-fullerene collisions, the inclusion of self-consistency is found to be crucial for a correct description of the charge transfer between projectile and target. For a model of the photoreceptor in retinal proteins, nonadiabatic molecular dynamics simulations are performed and reveal problems of TDDFT in the prediction of intra-molecular charge transfer excitations.
△ Less
Submitted 23 February, 2005; v1 submitted 9 November, 2004;
originally announced November 2004.
-
Quasiparticle energies for large molecules: a tight-binding GW approach
Authors:
T. A. Niehaus,
M. Rohlfing,
F. Della Sala,
A. Di Carlo,
Th. Frauenheim
Abstract:
We present a tight-binding based GW approach for the calculation of quasiparticle energy levels in confined systems such as molecules. Key quantities in the GW formalism like the microscopic dielectric function or the screened Coulomb interaction are expressed in a minimal basis of spherically averaged atomic orbitals. All necessary integrals are either precalculated or approximated without reso…
▽ More
We present a tight-binding based GW approach for the calculation of quasiparticle energy levels in confined systems such as molecules. Key quantities in the GW formalism like the microscopic dielectric function or the screened Coulomb interaction are expressed in a minimal basis of spherically averaged atomic orbitals. All necessary integrals are either precalculated or approximated without resorting to empirical data. The method is validated against first principles results for benzene and anthracene, where good agreement is found for levels close to the frontier orbitals. Further, the size dependence of the quasiparticle gap is studied for conformers of the polyacenes ($C_{4n+2}H_{2n+4}$) up to n = 30.
△ Less
Submitted 1 November, 2004;
originally announced November 2004.
-
A new type of charged defect in amorphous chalcogenides
Authors:
S. I. Simdyankin,
T. A. Niehaus,
G. Natarajan,
Th. Frauenheim,
S. R. Elliott
Abstract:
We report on density-functional-based tight-binding (DFTB) simulations of a series of amorphous arsenic sulfide models. In addition to the charged coordination defects previously proposed to exist in chalcogenide glasses, a novel defect pair, [As4]--[S3]+, consisting of a four-fold coordinated arsenic site in a seesaw configuration and a three-fold coordinated sulfur site in a planar trigonal co…
▽ More
We report on density-functional-based tight-binding (DFTB) simulations of a series of amorphous arsenic sulfide models. In addition to the charged coordination defects previously proposed to exist in chalcogenide glasses, a novel defect pair, [As4]--[S3]+, consisting of a four-fold coordinated arsenic site in a seesaw configuration and a three-fold coordinated sulfur site in a planar trigonal configuration, was found in several models. The valence-alternation pairs S3+-S1- are converted into [As4]--[S3]+ pairs under HOMO-to-LUMO electronic excitation. This structural transformation is accompanied by a decrease in the size of the HOMO-LUMO band gap, which suggests that such transformations could contribute to photo-darkening in these materials.
△ Less
Submitted 17 September, 2004;
originally announced September 2004.
-
Simulation of the physical properties of the chalcogenide glass As$_2$S$_3$ using a density-functional-based tight-binding method
Authors:
S. I. Simdyankin,
S. R. Elliott,
Z. Hajnal,
T. A. Niehaus,
Th. Frauenheim
Abstract:
We have used a density-functional-based tight-binding method in order to create structural models of the canonical chalcogenide glass, amorphous (a-)As$_2$S$_3$. The models range from one containing defects that are both chemical (homopolar bonds) and topological (valence-alternation pairs) in nature to one that is defect-free (stoichiometric). The structural, vibrational and electronic properti…
▽ More
We have used a density-functional-based tight-binding method in order to create structural models of the canonical chalcogenide glass, amorphous (a-)As$_2$S$_3$. The models range from one containing defects that are both chemical (homopolar bonds) and topological (valence-alternation pairs) in nature to one that is defect-free (stoichiometric). The structural, vibrational and electronic properties of the simulated models are in good agreement with experimental data where available. The electronic densities of states obtained for all models show clean optical band gaps. A certain degree of electron-state localization at the band edges is observed for all models, which suggests that photoinduced phenomena in chalcogenide glasses may not necessarily be attributed to the excitation of defects of only one particular kind.
△ Less
Submitted 9 December, 2003;
originally announced December 2003.