-
Elucidating the Role of Stacking Faults in TlGaSe$_{2}$ on its Thermoelectric Properties
Authors:
Tigran Simonian,
Ahin Roy,
Akash Bajaj,
Rui Dong,
Zheng Lei,
Zdeněk Sofer,
Stefano Sanvito,
Valeria Nicolosi
Abstract:
Thermoelectric materials are of great interest for heat energy harvesting applications. One such promising material is TlGaSe$_{2}$, a p-type semiconducting ternary chalcogenide. Recent reports show it can be processed as a thin film, opening the door for large-scale commercialization. However, TlGaSe$_{2}$ is prone to stacking faults along the [001] stacking direction and their role in its thermo…
▽ More
Thermoelectric materials are of great interest for heat energy harvesting applications. One such promising material is TlGaSe$_{2}$, a p-type semiconducting ternary chalcogenide. Recent reports show it can be processed as a thin film, opening the door for large-scale commercialization. However, TlGaSe$_{2}$ is prone to stacking faults along the [001] stacking direction and their role in its thermoelectric properties has not been understood to date. Herein, TlGaSe$_{2}$ is investigated via (scanning) transmission electron microscopy and first-principles calculations. Stacking faults are found to be present throughout the material, as density functional theory calculations reveal a lack of preferential stacking order. Electron transport calculations show an enhancement of thermoelectric power factors when stacking faults are present. This implies the presence of stacking faults is key to the material's excellent thermoelectric properties along the [001] stacking direction, which can be further enhanced by do** the material to hole carrier concentrations to approx. 10$^{19}$ cm$^{-3}$.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Controlled Fabrication of Native Ultra-Thin Amorphous Gallium Oxide from 2D Gallium Sulfide for Emerging Electronic Applications
Authors:
AbdulAziz AlMutairi,
Aferdita Xhameni,
Xuyun Guo,
Irina Chircă,
Valeria Nicolosi,
Stephan Hofmann,
Antonio Lombardo
Abstract:
Oxidation of two-dimensional (2D) layered materials has proven advantageous in creating oxide/2D material heterostructures, opening the door for a new paradigm of low-power electronic devices. Gallium (II) sulfide ($β$-GaS), a hexagonal phase group III monochalcogenide, is a wide bandgap semiconductor with a bandgap exceeding 3 eV in single and few layer form. Its oxide, gallium oxide (Ga$_2$O…
▽ More
Oxidation of two-dimensional (2D) layered materials has proven advantageous in creating oxide/2D material heterostructures, opening the door for a new paradigm of low-power electronic devices. Gallium (II) sulfide ($β$-GaS), a hexagonal phase group III monochalcogenide, is a wide bandgap semiconductor with a bandgap exceeding 3 eV in single and few layer form. Its oxide, gallium oxide (Ga$_2$O$_3$), combines large bandgap (4.4-5.3 eV) with high dielectric constant (~10). Despite the technological potential of both materials, controlled oxidation of atomically-thin $β$-GaS remains under-explored. This study focuses into the controlled oxidation of $β$-GaS using oxygen plasma treatment, achieving ultrathin native oxide (GaS$_x$O$_y$, ~4 nm) and GaS$_x$O$_y$/GaS heterostructures where the GaS layer beneath remains intact. By integrating such structures between metal electrodes and applying electric stresses as voltage ramps or pulses, we investigate their use for resistive random-access memory (ReRAM). The ultrathin nature of the produced oxide enables low operation power with energy use as low as 0.22 nJ per operation while maintaining endurance and retention of 350 cycles and 10$^4$ s, respectively. These results show the significant potential of the oxidation-based GaS$_x$O$_y$/GaS heterostructure for electronic applications and, in particular, low-power memory devices.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Post-Synthetic Treatment of Nickel-Iron Layered Double Hydroxides for the Optimum Catalysis of the Oxygen Evolution Reaction
Authors:
Daire Tyndall,
Sonia Jaskaniec,
Brian Shortall,
Ahin Roy,
Lee Gannon,
Katie ONeill,
Michelle P. Browne,
Joao Coelho,
Cormac McGuinness,
Georg S. Duesberg,
Valeria Nicolosi
Abstract:
Nickel-iron layered double hydroxide (NiFe LDH) platelets with high morphological regularity and sub-micrometre lateral dimensions were synthesized using a homogeneous precipitation technique for highly efficient catalysis of the oxygen evolution reaction (OER). Considering edge sites are the point of activity, efforts were made to control platelet size within the synthesized dispersions. The goal…
▽ More
Nickel-iron layered double hydroxide (NiFe LDH) platelets with high morphological regularity and sub-micrometre lateral dimensions were synthesized using a homogeneous precipitation technique for highly efficient catalysis of the oxygen evolution reaction (OER). Considering edge sites are the point of activity, efforts were made to control platelet size within the synthesized dispersions. The goal is to controllably isolate and characterize size-reduced NiFe LDH particles. Synthetic approaches for size control of NiFe LDH platelets have not been transferable based on published work with other LDH materials and for that reason, we instead use post-synthetic treatment techniques to improve edge-site density. In the end, size reduced NiFe LDH/single-wall carbon nanotube (SWCNT) composites allowed to further reduce the OER overpotential to 237 plus/minus 7 mV ( L = 0.16 plus/minus 0.01 micrometres, 20 wt% SWCNT), which is one of the best values reported to date. This approach as well improved the long term activity of the catalyst in operating conditions.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
The Potential of MXene Materials as a Component in the Catalyst Layer for the Oxygen Evolution Reaction
Authors:
Michelle P. Browne,
Daire Tyndall,
Valeria Nicolosi
Abstract:
MXenes are a class of 2D/layered materials which are highly conductive, hydrophilic, have a large electrochemical surface area and are easily processible into electrodes for energy applications. Since the discovery of MXenes over ten years ago, these materials have been mainly used in the preparation of electrodes for batteries and supercapacitors. However, due to their aforementioned properties,…
▽ More
MXenes are a class of 2D/layered materials which are highly conductive, hydrophilic, have a large electrochemical surface area and are easily processible into electrodes for energy applications. Since the discovery of MXenes over ten years ago, these materials have been mainly used in the preparation of electrodes for batteries and supercapacitors. However, due to their aforementioned properties, MXenes could potentially be utilised as a component in the catalyst layer for the Oxygen Evolution Reaction (OER). This opinion piece will discuss some of the recent literature in the area of hybrid catalysts consisting of various Transition Metal Oxides (TMOs) and MXenes for the OER. We will also discuss current drawbacks and future outlook in this new area of research.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
A new semiconducting perovskite alloy system made possible by gas-source molecular beam epitaxy
Authors:
Ida Sadeghi,
Jack Van Sambeek,
Tigran Simonian,
Michael Xu,
Kevin Ye,
Valeria Nicolosi,
James M. LeBeau,
R. Jaramillo
Abstract:
Optoelectronic technologies are based on families of semiconductor alloys. It is rare that a new semiconductor alloy family is developed to the point where epitaxial growth is possible; since the 1950s, this has happened approximately once per decade. Here we demonstrate epitaxial thin film growth of semiconducting chalcogenide perovskite alloys in the Ba-Zr-S-Se system by gas-source molecular bea…
▽ More
Optoelectronic technologies are based on families of semiconductor alloys. It is rare that a new semiconductor alloy family is developed to the point where epitaxial growth is possible; since the 1950s, this has happened approximately once per decade. Here we demonstrate epitaxial thin film growth of semiconducting chalcogenide perovskite alloys in the Ba-Zr-S-Se system by gas-source molecular beam epitaxy (MBE). We stabilize the full range y = 0 ... 3 of compositions BaZrS$_{(3-y)}$Se$_y$ in the perovskite structure, up to and including BaZrSe$_3$, by growing on BaZrS$_3$ epitaxial templates. The resulting films are environmentally stable and the direct band gap ($E_g$) varies strongly with Se content, as predicted by theory, covering the range $E_g$ = 1.9 ... 1.4 eV for $y$ = 0 ... 3. This creates possibilities for visible and near-infrared (VIS-NIR) optoelectronics, solid state lighting, and solar cells using chalcogenide perovskites.
△ Less
Submitted 29 December, 2022; v1 submitted 19 November, 2022;
originally announced November 2022.
-
Solvent Engineered Synthesis of Layered SnO Nanoparticles for High-Performance Anodes
Authors:
Sonia Jaśkaniec,
Seán R. Kavanagh,
Joao Coelho,
Seán Ryan,
Christopher Hobbsb,
Aron Walsh,
David O. Scanlon,
Valeria Nicolosi
Abstract:
Batteries are the most abundant form of electrochemical energy storage. Lithium and sodium ion batteries account for a significant portion of the battery market, but high-performance electrochemically active materials still need to be discovered and optimized for these technologies. Recently, tin(II) oxide (SnO) has emerged as a highly-promising battery electrode. In this work, we present a facile…
▽ More
Batteries are the most abundant form of electrochemical energy storage. Lithium and sodium ion batteries account for a significant portion of the battery market, but high-performance electrochemically active materials still need to be discovered and optimized for these technologies. Recently, tin(II) oxide (SnO) has emerged as a highly-promising battery electrode. In this work, we present a facile synthesis method to produce SnO nanoparticles whose size and shape can be tailored by changing the solvent nature. We study the complex relationship between wet chemistry synthesis conditions and resulting layered nanoparticle morphology. Furthermore, high-level electronic structure theory, including dispersion corrections to account for van der Waals forces, are employed to enhance our understanding of the underlying chemical mechanisms. The electronic vacuum alignment and surface energies are determined, allowing the prediction of the thermodynamically-favoured crystal shape (Wulff construction) and surface-weighted work function. Finally, the synthesized nanomaterials were tested as Li-ion battery anodes, demonstrating significantly enhanced electrochemical performance for morphologies obtained from specific synthesis conditions.
△ Less
Submitted 4 November, 2020;
originally announced November 2020.
-
Quantifying the effect of electrical conductivity on the rate-performance of nanocomposite battery electrodes
Authors:
Ruiyuan Tian,
Nolito Alcala,
Stephen JK ONeill,
Dominik Horvath,
Joao Coelho,
Aideen Griffin,
Yan Zhang,
Valeria Nicolosi,
Colm ODwyer,
Jonathan N Coleman
Abstract:
While it is well-known that electrode conductivity has a critical impact on rate-performance in battery electrodes, this relationship has been quantified only by computer simulations. Here we investigate the relationship between electrode conductivity and rate-performance in Lithium-Nickel-Manganese-Cobalt-Oxide (NMC) cathodes filled with various quantities of carbon black, single-walled carbon na…
▽ More
While it is well-known that electrode conductivity has a critical impact on rate-performance in battery electrodes, this relationship has been quantified only by computer simulations. Here we investigate the relationship between electrode conductivity and rate-performance in Lithium-Nickel-Manganese-Cobalt-Oxide (NMC) cathodes filled with various quantities of carbon black, single-walled carbon nanotubes and graphene. The electrode conductivity is always extremely anisotropic with the out-of-plane conductivity, which is most relevant to rate-performance, roughly 1000 smaller than the in-plane conductivity. For all fillers the conductivity increases with filler loading although the nanotube-filled electrodes show by far the most rapid increase. Fitting capacity versus rate curves yielded the characteristic time associated with charge/discharge. This parameter increased linearly with the inverse of the out-of-plane conductivity, with all data points falling on the same master curve. Using a simple mechanistic model for the characteristic time, we develop an equation which matches the experimental data almost perfectly with no adjustable parameters. This implies that increasing the electrode conductivity improves the rate-performance by decreasing the RC charging time of the electrode. This model shows the effect of electrode resistance on the rate-performance to become negligible in almost all cases once the out-of-plane conductivity of the electrode exceeds 1 S/m. Our results show that this can be achieved by including <1wt% single-walled carbon nanotubes in the electrode.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Using chronoamperometry to rapidly measure and quantitatively analyse rate-performance in battery electrodes
Authors:
Ruiyuan Tian,
Paul J. King,
Joao Coelho,
Sang-Hoon Park,
Dominik V Horvath,
Valeria Nicolosi,
Colm ODwyer,
Jonathan N Coleman
Abstract:
For battery electrodes, measured capacity decays as charge/discharge current is increased. Such rate-performance is important from a practical perspective and is usually characterised via galvanostatic charge-discharge measurements. However, such measurements are very slow, limiting the number of rate experiments which are practical in a given project. This is a particular problem during mechanist…
▽ More
For battery electrodes, measured capacity decays as charge/discharge current is increased. Such rate-performance is important from a practical perspective and is usually characterised via galvanostatic charge-discharge measurements. However, such measurements are very slow, limiting the number of rate experiments which are practical in a given project. This is a particular problem during mechanistic studies where many rate measurements are needed. Here, building on work by Heubner at al., we demonstrate chronoamperometry (CA) as a relatively fast method for measuring capacity-rate curves with hundreds of data points down to C-rates below 0.01C. While Heubner et al. reported equations to convert current transients to capacity vs. C-rate curves, we modify these equations to give capacity as a function of charge/discharge rate, R. We show that such expressions can be combined with a basic model to obtain simple equations which can fit data for both capacity vs. C-rate and capacity vs. R. We demonstrate that these equations can accurately fit experimental data within normal experimental ranges of rate. However, we also observe that, at high rates, the curves obtained from CA deviate from the normal behaviour showing a new, previously unobserved, decay feature. We associate this feature with the very early part of the current transient where electronic motion dominates the current. Using a simple model, we show that the dependence of the high-rate time constant on electrode thickness can be linked to electrode conductivity.
△ Less
Submitted 27 November, 2019;
originally announced November 2019.
-
Suppression of the Shear Raman Mode in Defective Bilayer MoS2
Authors:
Pierce Maguire,
Clive Downing,
Jakub Jadwiszczak,
Maria O'Brien,
Darragh Keane,
John B. McManus,
Georg S. Duesberg,
Valeria Nicolosi,
Niall McEvoy,
Hongzhou Zhang
Abstract:
We investigate the effects of lattice disorders on the low frequency Raman spectra of bilayer MoS2. The bilayer MoS2 was subjected to defect engineering by irradiation with a 30 keV He+ ion beam and the induced morphology change was characterized by transmission electron microscopy. With increasing ion dose the shear mode is observed to redshift and it is also suppressed sharply compared to other…
▽ More
We investigate the effects of lattice disorders on the low frequency Raman spectra of bilayer MoS2. The bilayer MoS2 was subjected to defect engineering by irradiation with a 30 keV He+ ion beam and the induced morphology change was characterized by transmission electron microscopy. With increasing ion dose the shear mode is observed to redshift and it is also suppressed sharply compared to other Raman peaks. We use the linear chain model to describe the changes to the Raman spectra. Our observations suggest that crystallite size and orientation are the dominant factors behind the changes to the Raman spectra.
△ Less
Submitted 14 December, 2018; v1 submitted 13 December, 2018;
originally announced December 2018.
-
Quantifying the factors limiting rate-performance in battery electrodes
Authors:
Ruiyuan Tian,
Sang-Hoon Park,
Paul J. King,
Graeme Cunningham,
Joao Coelho,
Valeria Nicolosi,
Jonathan N Coleman
Abstract:
A significant problem associated with batteries is the rapid reduction of charge-storage capacity with increasing charge/discharge rate. For example, improving this rate-performance is required for fast-charging of car batteries. Rate-performance is related to the timescales associated with charge or ionic motion in both electrode and electrolyte. However, no quantitative model exists which can be…
▽ More
A significant problem associated with batteries is the rapid reduction of charge-storage capacity with increasing charge/discharge rate. For example, improving this rate-performance is required for fast-charging of car batteries. Rate-performance is related to the timescales associated with charge or ionic motion in both electrode and electrolyte. However, no quantitative model exists which can be used to fit experimental data to give insights into the dominant rate-limiting processes in a given electrode-electrolyte system. Here we develop an equation which can be used to fit capacity versus rate data, outputting three parameters which fully describe rate-performance. Most important is the characteristic time associated with charge/discharge which can be expressed by a simple equation with terms describing each rate-limiting process, thus linking rate-performance to measurable physical parameters. We have fitted these equations to ~200 data sets from ~50 papers, finding exceptional agreement, and allowing parameters such as diffusion coefficients or electrolyte conductivities to be extracted. By estimating relevant physical parameters, it is possible to show which rate-limiting processes are dominant in a given situation, facilitating rational design and cell optimization. In addition, this model predicts the upper speed limit for Li/Na ion batteries, in agreement with the fastest electrodes in the literature.
△ Less
Submitted 25 October, 2018;
originally announced October 2018.
-
Low-temperature synthesis of high quality Ni-Fe layered double hydroxides hexagonal platelets
Authors:
Sonia Jaskaniec,
Christopher Hobbs,
Andres Seral-Ascaso,
Joao Coelho,
Michelle P. Browne,
Daire Tyndall,
Takayoshi Sasaki,
Valeria Nicolosi
Abstract:
This paper describes the wet-chemistry synthesis of highly crystalline hexagonal flakes of Ni-Fe layered double hydroxide (LDH) produced at temperature as low as 100 oC. The flakes with diameter in the range of 0.5-1.5 um and the thickness between 15 and 20 nm were obtained by homogeneous precipitation method with the use of triethanolamine (TEA) and urea. By analyzing the intermediate products, i…
▽ More
This paper describes the wet-chemistry synthesis of highly crystalline hexagonal flakes of Ni-Fe layered double hydroxide (LDH) produced at temperature as low as 100 oC. The flakes with diameter in the range of 0.5-1.5 um and the thickness between 15 and 20 nm were obtained by homogeneous precipitation method with the use of triethanolamine (TEA) and urea. By analyzing the intermediate products, it is suggested that, differently from previous reports, a thermodynamically metastable iron oxyhydroxide and Ni-TEA complex are firstly formed at room temperature. Subsequently, when the mixture is heated to 100 oC and the pH increases due to the thermal decomposition of urea, Ni2+ and Fe3+ are slowly released and then recombine, thus leading to formation of pure, highly-crystalline Ni-Fe LDH flakes. This material showed promising results as an electrocatalyst in oxygen evolution reaction (OER) providing an overpotential value of 0.36 V.
△ Less
Submitted 19 September, 2017;
originally announced September 2017.
-
Oxide-mediated self-limiting recovery of field effect mobility in plasma-treated MoS$_2$
Authors:
Jakub Jadwiszczak,
Colin O'Callaghan,
Yangbo Zhou,
Daniel S. Fox,
Eamonn Weitz,
Darragh Keane,
Ian O'Reilly,
Clive Downing,
Aleksey Shmeliov,
Pierce Maguire,
John J. Gough,
Cormac McGuinness,
Mauro S. Ferreira,
A. Louise Bradley,
John J. Boland,
Valeria Nicolosi,
Hongzhou Zhang
Abstract:
Precise tunability of electronic properties of 2D nanomaterials is a key goal of current research in this field of materials science. Chemical modification of layered transition metal dichalcogenides leads to the creation of heterostructures of low-dimensional variants of these materials. In particular, the effect of oxygen-containing plasma treatment on molybdenum disulfide (MoS$_2$) has long bee…
▽ More
Precise tunability of electronic properties of 2D nanomaterials is a key goal of current research in this field of materials science. Chemical modification of layered transition metal dichalcogenides leads to the creation of heterostructures of low-dimensional variants of these materials. In particular, the effect of oxygen-containing plasma treatment on molybdenum disulfide (MoS$_2$) has long been thought to be detrimental to the electrical performance of the material. Here we show that the mobility and conductivity of MoS$_2$ can be precisely controlled and improved by systematic exposure to oxygen:argon plasma, and characterise the material utilising advanced spectroscopy and microscopy. Through complementary theoretical modelling which confirms conductivity enhancement, we uncover the role of a two-dimensional phase of molybdenum trioxide (2D-MoO$_3$) in improving the electronic behaviour of the material. Deduction of the beneficial role of MoO$_3$ will serve to open the field to new approaches with regard to the tunability of 2D semiconductors by their low-dimensional oxides in nano-modified heterostructures.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Probing the local nature of excitons and plasmons in few-layer MoS2
Authors:
Hannah Catherine Nerl,
Kirsten Trøstrup Winther,
Fredrik Sydow Hage,
Kristian Sommer Thygesen,
Lothar Houben,
Claudia Backes,
Jonathan N Coleman,
Quentin M Ramasse,
Valeria Nicolosi
Abstract:
Excitons and plasmons are the two most fundamental types of collective electronic excitations occurring in solids. Traditionally, they have been studied separately using bulk techniques that probe their average energetic structure over large spatial regions. However, as the dimensions of materials and devices continue to shrink, it becomes crucial to understand how these excitations depend on loca…
▽ More
Excitons and plasmons are the two most fundamental types of collective electronic excitations occurring in solids. Traditionally, they have been studied separately using bulk techniques that probe their average energetic structure over large spatial regions. However, as the dimensions of materials and devices continue to shrink, it becomes crucial to understand how these excitations depend on local variations in the crystal- and chemical structure on the atomic scale. Here we use monochromated low-loss scanning-transmission-electron-microscopy electron-energy-loss (LL-STEM-EEL) spectroscopy, providing the best simultaneous energy and spatial resolution achieved to-date to unravel the full set of electronic excitations in few-layer MoS2 nanosheets over a wide energy range. Using first-principles many-body calculations we confirm the excitonic nature of the peaks at ~2eV and ~3eV in the experimental EEL spectrum and the plasmonic nature of higher energy-loss peaks. We also rationalise the non-trivial dependence of the EEL spectrum on beam and sample geometry such as the number of atomic layers and distance to steps and edges. Moreover, we show that the excitonic features are dominated by the long wavelength (q=0) components of the probing field, while the plasmonic features are sensitive to a much broader range of q-vectors, indicating a qualitative difference in the spatial character of the two types of collective excitations. Our work provides a template protocol for map** the local nature of electronic excitations that open new possibilities for studying photo-absorption and energy transfer processes on a nanometer scale.
△ Less
Submitted 13 April, 2017; v1 submitted 1 February, 2017;
originally announced February 2017.
-
Efficient fluorescence quenching in electrochemically exfoliated graphene decorated with gold nanoparticles
Authors:
M. Hurtado-Morales,
M. Ortiz,
C. Acuna,
H. C. Nerl,
V. Nicolosi,
Y. Hernandez
Abstract:
High surface area graphene sheets were obtained by electrochemical exfoliation of graphite in an acid media under constant potential conditions. Filtration and centrifugation processes played an important role in order to obtain stable dispersions in water. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) imaging revealed highly exfoliated crystalline samples of ~5(\mu…
▽ More
High surface area graphene sheets were obtained by electrochemical exfoliation of graphite in an acid media under constant potential conditions. Filtration and centrifugation processes played an important role in order to obtain stable dispersions in water. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) imaging revealed highly exfoliated crystalline samples of ~5(\mum). Raman, FT-IR and XPS spectroscopy further confirmed the high quality of the exfoliated material. The electrochemically exfoliated graphene (EEG) was decorated with gold nanoparticles (AuNP) using sodium cholate (SC) as a buffer layer. This approach allowed for a non-covalent functionalization without altering the desirable electronic properties of the EEG. The AuNP-EEG samples were characterized with various techniques including absorbance and fluorescence spectroscopy. These samples displayed a fluorescence signal using an excitation wavelength of 290nm. The calculated quantum yield (?) for these samples was 40.04%, a high efficiency compared to previous studies using solution processable graphene.
△ Less
Submitted 23 May, 2016;
originally announced May 2016.
-
An in- and ex-situ TEM study into the oxidisation of titanium (IV) sulphide
Authors:
Edmund Long,
Sean O'Brien,
Edward A. Lewis,
Eric Prestat,
Clive Downing,
Clotilde S. Cucinotta,
Stefano Sanvito,
Sarah J. Haigh,
Valeria Nicolosi
Abstract:
The degradation of liquid dispersed titanium (IV) sulphide (TiS$_2$) is studied from the point of view of oxidisation. TiS$_2$ is a layered two-dimensional nanomaterial, with potential for energy storage applications. However, flakes in dispersion were observed to degrade. We examined two oxidisation routes: deionised water at room temperature and oxygen gas within the temperature range 150-350°C.…
▽ More
The degradation of liquid dispersed titanium (IV) sulphide (TiS$_2$) is studied from the point of view of oxidisation. TiS$_2$ is a layered two-dimensional nanomaterial, with potential for energy storage applications. However, flakes in dispersion were observed to degrade. We examined two oxidisation routes: deionised water at room temperature and oxygen gas within the temperature range 150-350°C. Water was seen to slowly oxidise flakes inwards from the edge, forming an amorphous oxide, a result comparable to the state of flakes which degraded within the original dispersion. Oxygen gas was seen to rapidly oxidise entire flakes to a polycrystalline oxide, when heated 275 °C and above. Degradation was studied with scanning transmission electron microscopy (STEM), energy dispersed x-ray spectroscopy (EDX) and electron energy-loss spectroscopy (EELS). Density Functional Theory calculations have shown oxidisation by both water and gas molecules to be thermodynamically favourable.
△ Less
Submitted 29 May, 2015;
originally announced May 2015.
-
Liquid exfoliation of solvent-stabilised black phosphorus: applications beyond electronics
Authors:
Damien Hanlon,
Claudia Backes,
Evie Doherty,
Clotilde S. Cucinotta,
Nina C. Berner,
Conor Boland,
Kangho Lee,
Peter Lynch,
Zahra Gholamvand,
Andrew Harvey,
Saifeng Zhang,
Kangpeng Wang,
Glenn Moynihan,
Anuj Pokle,
Quentin M. Ramasse,
Niall McEvoy,
Werner J. Blau,
Jun Wang,
Stefano Sanvito,
David D. ORegan,
Georg S. Duesberg,
Valeria Nicolosi,
Jonathan N. Coleman
Abstract:
Few layer black phosphorus is a new two-dimensional material which is of great interest for applications, mainly in electronics. However, its lack of stability severely limits our ability to synthesise and process this material. Here we demonstrate that high-quality, few-layer black phosphorus nanosheets can be produced in large quantities by liquid phase exfoliation in the solvent N-cyclohexyl-2-…
▽ More
Few layer black phosphorus is a new two-dimensional material which is of great interest for applications, mainly in electronics. However, its lack of stability severely limits our ability to synthesise and process this material. Here we demonstrate that high-quality, few-layer black phosphorus nanosheets can be produced in large quantities by liquid phase exfoliation in the solvent N-cyclohexyl-2-pyrrolidone (CHP). We can control nanosheet dimensions and have developed metrics to estimate both nanosheet size and thickness spectroscopically. When exfoliated in CHP, the nanosheets are remarkably stable unless water is intentionally introduced. Computational studies show the degradation to occur by reaction with water molecules only at the nanosheet edge, leading to the removal of phosphorus atoms and the formation of phosphine and phosphorous acid. We demonstrate that liquid exfoliated black phosphorus nanosheets are potentially useful in a range of applications from optical switches to gas sensors to fillers for composite reinforcement.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
Manganese oxide nanosheets and a 2D hybrid of graphene-manganese oxide nanosheets synthesized by liquid-phase exfoliation
Authors:
Joao Coelho,
Beatriz Mendoza-Sanchez,
Henrik Pettersson,
Anuj Pokle,
Eva K. McGuire,
Edmund Long,
Lorcan McKeon,
Alan P. Bell,
Valeria Nicolosi
Abstract:
Manganese oxide nanosheets were synthesized using liquid phase exfoliation that achieved suspensions in isopropanol with concentrations of up to 0.45 mg/ml. A study of solubility parameters showed that the exfoliation was optimum in DMF followed by isopropanol and diethylene glycol. Isopropanol was the solvent of choice due to its environmentally friendly nature and ease of use for further process…
▽ More
Manganese oxide nanosheets were synthesized using liquid phase exfoliation that achieved suspensions in isopropanol with concentrations of up to 0.45 mg/ml. A study of solubility parameters showed that the exfoliation was optimum in DMF followed by isopropanol and diethylene glycol. Isopropanol was the solvent of choice due to its environmentally friendly nature and ease of use for further processing. The 2D hybrid was synthesized in isopropanol suspensions with concentrations of up to 0.5 mg/ml and demonstrated stability against reaggregation for up to six months. The coexfoliation was found to be an energetically favorable process in which both solutes, graphene and manganese oxide nanosheets, exfoliate with an improved yield as compared to the single solute exfoliation procedure. This work demonstrates the remarkable versatility of liquid phase exfoliation with respect to the synthesis of hybrids with tailored properties, and it provides proof of concept ground work for further future investigation and exploitation of hybrids made of two or more 2D nanomaterials that have key complementary properties for various technological applications.
△ Less
Submitted 3 September, 2014;
originally announced September 2014.
-
Brownian Motion of Graphene
Authors:
O. M. Marago,
F. Bonaccorso,
R. Saija,
G. Privitera,
P. G. Gucciardi,
M. A. Iati,
G. Calogero,
P. H. Jones,
F. Borghese,
P. Denti,
V. Nicolosi,
A. C. Ferrari
Abstract:
We study the Brownian motion (BM) of optically trapped graphene flakes. These orient orthogonal to the light polarization, due to the optical constants anisotropy. We explain the flake dynamics, measure force and torque constants and derive a full electromagnetic theory of optical trap**. The understanding of two dimensional BM paves the way to light-controlled manipulation and all-optical sorti…
▽ More
We study the Brownian motion (BM) of optically trapped graphene flakes. These orient orthogonal to the light polarization, due to the optical constants anisotropy. We explain the flake dynamics, measure force and torque constants and derive a full electromagnetic theory of optical trap**. The understanding of two dimensional BM paves the way to light-controlled manipulation and all-optical sorting of biological membranes and anisotropic macromolecules.
△ Less
Submitted 1 June, 2010;
originally announced June 2010.
-
Edge-carboxylated Carbon Nanoflakes from Nitric Acid Oxidised Arc-discharge Material
Authors:
Christoph G. Salzmann,
Valeria Nicolosi,
Malcolm L. H. Green
Abstract:
Carbon Nanoflakes (CNFs) with average diameters of about 30 nm have been prepared and isolated in bulk quantities by a single-step oxidation procedure using single-wall carbon nanotube arc-discharge material and nitric acid. The CNFs are predominately single, graphenic sheets containing a small number of internal defects. The edges are decorated with primarily carboxylic acid groups which allow…
▽ More
Carbon Nanoflakes (CNFs) with average diameters of about 30 nm have been prepared and isolated in bulk quantities by a single-step oxidation procedure using single-wall carbon nanotube arc-discharge material and nitric acid. The CNFs are predominately single, graphenic sheets containing a small number of internal defects. The edges are decorated with primarily carboxylic acid groups which allow facile chemical functionalisation and cross-linking of the fragments using multivalent cations.
△ Less
Submitted 12 August, 2009;
originally announced August 2009.
-
Liquid phase production of graphene by exfoliation of graphite in surfactant/water solutions
Authors:
Y Hernandez,
M Lotya,
V Nicolosi,
FM Blighe,
S De,
G Duesberg,
JN Coleman
Abstract:
We have demonstrated a method to disperse and exfoliate graphite to give graphene suspended in water-surfactant solutions. Optical characterisation of these suspensions allowed the partial optimisation of the dispersion process. Transmission electron microscopy showed the dispersed phase to consist of small graphitic flakes. More than 40% of these flakes had <5 layers with ~3% of flakes consisti…
▽ More
We have demonstrated a method to disperse and exfoliate graphite to give graphene suspended in water-surfactant solutions. Optical characterisation of these suspensions allowed the partial optimisation of the dispersion process. Transmission electron microscopy showed the dispersed phase to consist of small graphitic flakes. More than 40% of these flakes had <5 layers with ~3% of flakes consisting of monolayers. These flakes are stabilised against reaggregation by Coulomb repulsion due to the adsorbed surfactant. However, the larger flakes tend to sediment out over ~6 weeks, leaving only small flakes dispersed. It is possible to form thin films by vacuum filtration of these dispersions. Raman and IR spectroscopic analysis of these films suggests the flakes to be largely free of defects and oxides. The deposited films are reasonably conductive and are semi-transparent. Further improvements may result in the development of cheap transparent conductors.
△ Less
Submitted 16 September, 2008;
originally announced September 2008.
-
High yield production of graphene by liquid phase exfoliation of graphite
Authors:
Y. Hernandez,
V. Nicolosi,
M. Lotya,
F. Blighe,
Z. Sun,
S. De,
I. T. McGovern,
B. Holland,
M. Byrne,
Y. Gunko,
J. Boland,
P. Niraj,
G. Duesberg,
S. Krishnamurti,
R. Goodhue,
J. Hutchison,
V. Scardaci,
A. C. Ferrari,
J. N. Coleman
Abstract:
Graphene is at the centre of nanotechnology research. In order to fully exploit its outstanding properties, a mass production method is necessary. Two main routes are possible: large-scale growth or large-scale exfoliation. Here, we demonstrate graphene dispersions with concentrations up to ~0.01 mg/ml by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone. Th…
▽ More
Graphene is at the centre of nanotechnology research. In order to fully exploit its outstanding properties, a mass production method is necessary. Two main routes are possible: large-scale growth or large-scale exfoliation. Here, we demonstrate graphene dispersions with concentrations up to ~0.01 mg/ml by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone. This occurs because the energy required to exfoliate graphene is balanced by the solvent-graphene interaction for solvents whose surface energy matches that of graphene. We confirm the presence of individual graphene sheets with yields of up to 12% by mass, using absorption spectroscopy, transmission electron microscopy and electron diffraction. The absence of defects or oxides is confirmed by X-ray photoelectron, infra-red and Raman spectroscopies. We can produce conductive, semi-transparent films and conductive composites. Solution processing of graphene opens up a whole range of potential large-scale applications from device or sensor fabrication to liquid phase chemistry.
△ Less
Submitted 19 May, 2008;
originally announced May 2008.
