Showing 1–7 of 7 results for author: Neswold, R

Software and Firmware-logic Design for the PIP-II Machine Protection System Mode and Configuration Control at Fermilab

Authors: L. Carmichael, M. Austin, J. Eisch, E. Harms, R. Neswold, A. Prosser, A. Warner, J. Wu

Abstract: The PIP-II Machine Protection System (MPS) requires a dedicated set of tools for configuration control and management of the machine modes and beam modes of the accelerator. The protection system reacts to signals from various elements of the machine according to rules established in a setup database in the form of a Look-Up-Table filtered by the program Mode Controller. This is achieved in accord… ▽ More The PIP-II Machine Protection System (MPS) requires a dedicated set of tools for configuration control and management of the machine modes and beam modes of the accelerator. The protection system reacts to signals from various elements of the machine according to rules established in a setup database in the form of a Look-Up-Table filtered by the program Mode Controller. This is achieved in accordance with commands from the operator and governed by the firmware logic of the MPS. This paper describes the architecture, firmware logic, and implementation of the program mode controller. △ Less

Submitted 31 January, 2024; originally announced January 2024.

Comments: 18th Intl Conf Accel Large Exp Phys Cntrl Systems (ICALEPCS)

Report number: FERMILAB-CONF-23-554-AD-PIP2-PPD

Controls at the Fermilab PIP-II Superconducting Linac

Authors: Dennis J. Nicklaus, Pierrick Hanlet, Charles King, Daniel McArthur, Richard Neswold

Abstract: PIP-II is an 800 MeV superconducting RF linear accelerator under development at Fermilab. As the new first stage in our accelerator chain, it will deliver high-power beam to multiple experiments simultaneously and thus drive Fermilab's particle physics program for years to come. In a pivot for Fermilab, controls for PIP-II are based on EPICS instead of ACNET, the legacy control system for accelera… ▽ More PIP-II is an 800 MeV superconducting RF linear accelerator under development at Fermilab. As the new first stage in our accelerator chain, it will deliver high-power beam to multiple experiments simultaneously and thus drive Fermilab's particle physics program for years to come. In a pivot for Fermilab, controls for PIP-II are based on EPICS instead of ACNET, the legacy control system for accelerators at the lab. This paper discusses the status of the EPICS controls work for PIP-II. We describe the EPICS tools selected for our system and the experience of operators new to EPICS. We introduce our continuous integration / continuous development environment. We also describe some efforts at cooperation between EPICS and ACNET, or efforts to move towards a unified interface that can apply to both control systems. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: 19th Intl Conf Accel Large Exp Phys Cntrl Systems (ICALEPCS)

Report number: FERMILAB-CONF-23-540-AD

Experience With Machine Protection Systems At PIP2IT

Authors: PIP-II Collaboration, :, A. Warner, M. Austin, L. Carmichael, J. -P. Carneiro, B. Hanna, E. Harms, R. Neswold, L. Prost, R. Rivera, A. Shemyakin, M. Ibrahim, J. Wu

Abstract: The PIP-II Injector Test 1 PIP2IT facility accelerator was assembled in multiple stages in 2014 $-$ 2021 to test concepts and components of the future PIPII linac that is being constructed at Fermilab. In its final configuration, PIP2IT accelerated a 0.55 ms x 20 Hz x 2 mA H$-$ beam to 16 MeV. To protect elements of the beam line, a Machine Protection System MPS was implemented and commissioned. T… ▽ More The PIP-II Injector Test 1 PIP2IT facility accelerator was assembled in multiple stages in 2014 $-$ 2021 to test concepts and components of the future PIPII linac that is being constructed at Fermilab. In its final configuration, PIP2IT accelerated a 0.55 ms x 20 Hz x 2 mA H$-$ beam to 16 MeV. To protect elements of the beam line, a Machine Protection System MPS was implemented and commissioned. The beam was interrupted faster than 10$μ$s when excessive beam loss was detected. The paper describes the MPS architecture, methods of the loss detection, procedure of the beam interruption, and operational experience at PIP2IT. △ Less

Submitted 8 September, 2022; v1 submitted 2 September, 2022; originally announced September 2022.

Comments: 11th International Beam Instrumentation Conference (IBIC 2022)

Report number: FERMILAB-CONF-22-644-AD-PPD-SCD

Experience with Long-pulse Operation of the PIP2IT Warm Front End

Authors: A. Shemyakin, J. -P. Carneiro, A. Chen, D. Frolov, B. Hanna, R. Neswold, L. Prost, G. Saewert, A. Saini, V. Scarpine, A. Warner, J. -Y. Wu, C. Richard

Abstract: The warm front end of the PIP2IT accelerator, assem-bled and commissioned at Fermilab, consists of a 15 mA DC, 30 keV H- ion source, a 2 m long Low Energy Beam Transport (LEBT) line, and a 2.1 MeV, 162.5 MHz CW RFQ, followed by a 10 m long Medium Energy Beam Transport (MEBT) line. A part of the commissioning efforts involves operation with the average beam power emulating the operation of the prop… ▽ More The warm front end of the PIP2IT accelerator, assem-bled and commissioned at Fermilab, consists of a 15 mA DC, 30 keV H- ion source, a 2 m long Low Energy Beam Transport (LEBT) line, and a 2.1 MeV, 162.5 MHz CW RFQ, followed by a 10 m long Medium Energy Beam Transport (MEBT) line. A part of the commissioning efforts involves operation with the average beam power emulating the operation of the proposed PIP-II accelera-tor, which will have a duty factor of 1.1% or above. The maximum achieved power is 5 kW (2.1 MeV x 5 mA x 25 ms x 20 Hz). This paper describes the difficulties encoun-tered and some of the solutions that were implemented. △ Less

Submitted 6 December, 2019; originally announced December 2019.

Comments: 4 pages, NAPAC2019

Report number: FERMILAB-CONF-19-439-AD

Further developments in generating type-safe messaging

Authors: R. Neswold, C. King

Abstract: At ICALEPCS '09, we introduced a source code generator that allows processes to communicate safely using data types native to each host language. In this paper, we discuss further development that has occurred since the conference in Kobe, Japan, including the addition of three more client languages, an optimization in network packet size and the addition of a new protocol data type. At ICALEPCS '09, we introduced a source code generator that allows processes to communicate safely using data types native to each host language. In this paper, we discuss further development that has occurred since the conference in Kobe, Japan, including the addition of three more client languages, an optimization in network packet size and the addition of a new protocol data type. △ Less

Submitted 3 October, 2012; originally announced October 2012.

Comments: 4 pp. 13th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS 2011). 10-14 Oct 2011. Grenoble, France

Report number: FERMILAB-CONF-11-594-AD

ACSYS in a box

Authors: C. Briegel, D. Finstrom, B. Hendricks, C. King, S. Lackey, R. Neswold, D. Nicklaus, J. Patrick, A. Petrov, R. Rechenmacher, C. Schumann, J. Smedinghoff

Abstract: The Accelerator Control System at Fermilab has evolved to enable this relatively large control system to be encapsulated into a "box" such as a laptop. The goal was to provide a platform isolated from the "online" control system. This platform can be used internally for making major upgrades and modifications without impacting operations. It also provides a standalone environment for research and… ▽ More The Accelerator Control System at Fermilab has evolved to enable this relatively large control system to be encapsulated into a "box" such as a laptop. The goal was to provide a platform isolated from the "online" control system. This platform can be used internally for making major upgrades and modifications without impacting operations. It also provides a standalone environment for research and development including a turnkey control system for collaborators. Over time, the code base running on Scientific Linux has enabled all the salient features of the Fermilab's control system to be captured in an off-the-shelf laptop. The anticipated additional benefits of packaging the system include improved maintenance, reliability, documentation, and future enhancements. △ Less

Submitted 1 October, 2012; originally announced October 2012.

Comments: 3 pp. 13th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS 2011). 10-14 Oct 2011. Grenoble, France

Report number: FERMILAB-CONF-11-573-AD

Development of a machine protection system for the Superconducting Beam Test Facility at Fermilab

Authors: A. Warner, L. Carmichael, M. Church, R. Neswold

Abstract: Fermilab's Superconducting RF Beam Test Facility currently under construction will produce electron beams capable of damaging the acceleration structures and the beam line vacuum chambers in the event of an aberrant accelerator pulse. The accelerator is being designed with the capability to operate with up to 3000 bunches per macro-pulse, 5Hz repetition rate and 1.5 GeV beam energy. It will be abl… ▽ More Fermilab's Superconducting RF Beam Test Facility currently under construction will produce electron beams capable of damaging the acceleration structures and the beam line vacuum chambers in the event of an aberrant accelerator pulse. The accelerator is being designed with the capability to operate with up to 3000 bunches per macro-pulse, 5Hz repetition rate and 1.5 GeV beam energy. It will be able to sustain an average beam power of 72 KW at the bunch charge of 3.2 nC. Operation at full intensity will deposit enough energy in niobium material to approach the melting point of 2500 °C. In the early phase with only 3 cryomodules installed the facility will be capable of generating electron beam energies of 810 MeV and an average beam power that approaches 40 KW. In either case a robust Machine Protection System (MPS) is required to mitigate effects due to such large damage potentials. This paper will describe the MPS system being developed, the system requirements and the controls issues under consideration. △ Less

Submitted 28 September, 2012; originally announced September 2012.

Comments: 3 pp. 13th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS 2011). 10-14 Oct 2011. Grenoble, France

Report number: FERMILAB-CONF-11-501-AD