-
ML-extendable framework for multiphysics-multiscale simulation workflow and data management using Kadi4Mat
Authors:
Somnath Bharech,
Yangyiwei Yang,
Michael Selzer,
Britta Nestler,
Bai-Xiang Xu
Abstract:
As material modeling and simulation has become vital for modern materials science, research data with distinctive physical principles and extensive volume are generally required for full elucidation of the material behavior across all relevant scales. Effective workflow and data management, with corresponding metadata descriptions, helps leverage the full potential of data-driven analyses for comp…
▽ More
As material modeling and simulation has become vital for modern materials science, research data with distinctive physical principles and extensive volume are generally required for full elucidation of the material behavior across all relevant scales. Effective workflow and data management, with corresponding metadata descriptions, helps leverage the full potential of data-driven analyses for computer-aided material design. In this work, we propose a research workflow and data management (RWDM) framework to manage complex workflows and resulting research (meta)data, while following FAIR principles. Multiphysics multiscale simulations for additive manufacturing investigations are treated as showcase and implemented on Kadi4Mat: an open source research data infrastructure. The input and output data of the simulations, together with the associated setups and scripts realizing the simulation workflow, are curated in corresponding standardized Kadi4Mat records with extendibility for further research and data-driven analyses. These records are interlinked to indicate information flow and form an ontology based knowledge graph. Automation scheme for performing high-throughput simulation and post-processing integrated with the proposed RWDM framework is also presented.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Compressible and immiscible fluids with arbitrary density ratio
Authors:
Fei Wang,
Britta Nestler
Abstract:
For the water-air system, the density ratio is as high as about 1000; no model can fully tackle such a high density ratio system. Here, we present an alternative theory for the density evolution equations in computational fluid dynamics, differing from the concept of Navier-Stokes and Euler equations. Our derivation is built upon the physical principle of energy minimization from the aspect of the…
▽ More
For the water-air system, the density ratio is as high as about 1000; no model can fully tackle such a high density ratio system. Here, we present an alternative theory for the density evolution equations in computational fluid dynamics, differing from the concept of Navier-Stokes and Euler equations. Our derivation is built upon the physical principle of energy minimization from the aspect of thermodynamics. The present results are consistent with Landau's theory of sound speed, and, most importantly, provide a generalization of Bernoulli's principle for energy conservation. The present model can be applied for immiscible fluids with arbitrary density ratios, thereby, opening a new window for computational fluid dynamics both for compressible and incompressible fluids.
△ Less
Submitted 28 June, 2024;
originally announced June 2024.
-
Breakup of liquid jets: Thermodynamic perspectives
Authors:
Fei Wang,
Oleg Tschukin,
Thomas Leisner,
Haodong Zhang,
Britta Nestler
Abstract:
Breakup of a liquid jet into a chain of droplets is common in nature and industry. Previous researchers developed profound mathematic and fluid dynamic models to address this breakup phenomenon starting from tiny perturbations. However, the morphological evolution of the jets at large amplitude perturbations is still an open question. Here, we report a concise thermodynamic model based on the surf…
▽ More
Breakup of a liquid jet into a chain of droplets is common in nature and industry. Previous researchers developed profound mathematic and fluid dynamic models to address this breakup phenomenon starting from tiny perturbations. However, the morphological evolution of the jets at large amplitude perturbations is still an open question. Here, we report a concise thermodynamic model based on the surface area minimization principle. Our results demonstrate a reversible breakup transition from a continuous jet via droplets towards a uniform-radius cylinder, which has not been found previously, but is observed in our simulations. This new observation is attributed to a geometric constraint, which was often overlooked in former studies. We anticipate our model to be a shortcut to tackle many similar highly nonlinear morphological evolutions without solving abstruse fluid dynamic equations for inviscid fluids.
△ Less
Submitted 13 February, 2024;
originally announced February 2024.
-
Brownian motion of droplets induced by thermal noise
Authors:
Haodong Zhang,
Fei Wang,
Lorenz Ratke,
Britta Nestler
Abstract:
Brownian motion (BM) is pivotal in natural science for the stochastic motion of microscopic droplets. In this study, we investigate BM driven by thermal composition noise at sub-micro scales, where inter-molecular diffusion and surface tension both are significant. To address BM of microscopic droplets, we develop two stochastic multi-phase-field models coupled with the full Navier-Stokes equation…
▽ More
Brownian motion (BM) is pivotal in natural science for the stochastic motion of microscopic droplets. In this study, we investigate BM driven by thermal composition noise at sub-micro scales, where inter-molecular diffusion and surface tension both are significant. To address BM of microscopic droplets, we develop two stochastic multi-phase-field models coupled with the full Navier-Stokes equation, namely Allen-Cahn-Navier-Stokes (ACNS) and Cahn-Hilliard-Navier-Stokes (CHNS). Both models are validated against capillary wave theory; the Einstein's relation for the Brownian coefficient at thermodynamic equilibrium is recovered. Moreover, by adjusting the co-action of the diffusion, Marangoni effect, and viscous friction, two non-equilibrium phenomena are observed. (I) The droplet motion transits from the Brownian to Ballistic with increasing Marangoni effect which is emanated from the energy dissipation mechanism distinct from the conventional fluctuation-dissipation theorem. (II) The deterministic droplet motion is triggered by the noise induced non-uniform velocity field which leads to a novel droplet coalescence mechanism associated with the thermal noise.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
A U-Net-Based Self-Stitching Method for Generating Periodic Grain Structures
Authors:
Ye Ji,
Arnd Koeppe,
Patrick Altschuh,
Lars Griem,
Deepalaxmi Rajagopal,
Britta Nestler,
Wei** Chen,
Yi Zhang,
Yue Zheng
Abstract:
When modeling microstructures, the computational resource requirements increase rapidly as the simulation domain becomes larger. As a result, simulating a small representative fraction under periodic boundary conditions is often a necessary simplification. However, the truncated structures leave nonphysical boundaries, which are detrimental to numerical modeling. Here, we propose a self-stitching…
▽ More
When modeling microstructures, the computational resource requirements increase rapidly as the simulation domain becomes larger. As a result, simulating a small representative fraction under periodic boundary conditions is often a necessary simplification. However, the truncated structures leave nonphysical boundaries, which are detrimental to numerical modeling. Here, we propose a self-stitching algorithm for generating periodic structures, demonstrated in a grain structure. The main idea of our algorithm is to artificially add structural information between mismatched boundary pairs, using the hierarchical spatial predictions of the U-Net. The algorithm provides an automatic and unbiased way to obtain periodic boundaries in grain structures and can be applied to porous microstructures in a similar way.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Revealing process and material parameter effects on densification via phase-field studies
Authors:
Marco Seiz,
Henrik Hierl,
Britta Nestler,
Wolfgang Rheinheimer
Abstract:
Sintering is an important processing step in both ceramics and metals processing. The microstructure resulting from this process determines many materials properties of interest. Hence the accurate prediction of the microstructure, depending on processing and materials parameters, is of great importance. The phase-field method offers a way of predicting this microstructural evolution on a mesoscop…
▽ More
Sintering is an important processing step in both ceramics and metals processing. The microstructure resulting from this process determines many materials properties of interest. Hence the accurate prediction of the microstructure, depending on processing and materials parameters, is of great importance. The phase-field method offers a way of predicting this microstructural evolution on a mesoscopic scale. The present paper employs this method to investigate concurrent densification and grain growth and the influence of stress on densification. Furthermore, the method is applied to simulate the entire freeze-casting process chain for the first time ever by simulating the freezing and sintering processes separately and passing the frozen microstructure to the present sintering model.
△ Less
Submitted 4 March, 2024; v1 submitted 18 August, 2023;
originally announced August 2023.
-
Unravelling densification during sintering by multiscale modelling of grain motion
Authors:
Marco Seiz,
Henrik Hierl,
Britta Nestler
Abstract:
The resulting microstructure after the sintering process determines many materials properties of interest. In order to understand the microstructural evolution, simulations are often employed. One such simulation method is the phase-field method, which has garnered much interest in recent decades. However, the method lacks a complete model for sintering, as previous works could show unphysical eff…
▽ More
The resulting microstructure after the sintering process determines many materials properties of interest. In order to understand the microstructural evolution, simulations are often employed. One such simulation method is the phase-field method, which has garnered much interest in recent decades. However, the method lacks a complete model for sintering, as previous works could show unphysical effects and the inability to reach representative volume elements. Thus the present paper aims to close this gap by employing molecular dynamics and determining rules of motion which can be translated to a phase-field model. The key realization is that vacancy absorption induced motion of grains travels through a grain structure without resistance. Hence the total displacement field of a green body is simply the superposition of all grains reacting in isolation to local vacancy absorption events. The resulting phase-field model is shown to be representative starting from particle counts between 97 and 262 and contains the qualitative correct dependence of sintering rate on particle size.
△ Less
Submitted 14 August, 2023; v1 submitted 31 May, 2023;
originally announced May 2023.
-
The effect of compression shock heating in collision welding
Authors:
Georg C. Ganzenmüller,
Sebastian Hütter,
Martin Reder,
Andreas Prahs,
Daniel Schneider,
Britta Nestler,
Thorsten Halle,
Stefan Hiermaier
Abstract:
This work discusses the origin of temperature rise during the collision welding process. The different physical irreversible and reversible mechanisms which act as heat sources are described: isentropic compression work, shock dissipation, plasticity, and phase transitions. The temperature increase due to these effects is quantified in a continuum mechanics approach, and compared to predictions of…
▽ More
This work discusses the origin of temperature rise during the collision welding process. The different physical irreversible and reversible mechanisms which act as heat sources are described: isentropic compression work, shock dissipation, plasticity, and phase transitions. The temperature increase due to these effects is quantified in a continuum mechanics approach, and compared to predictions of atomistic molecular dynamics simulations. Focusing on a single impact scenario of 1100 aluminium at 700 m/s, our results indicate that shock heating and plastic work only effect a temperature rise of 100 K, and that the effects of phase change are not significant. This temperature rise cannot explain welding. In consequence, the relevant mechanism which effects bonding in collision welding must be due to the jet, which is only formed at oblique impact angles.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
An improved grand-potential phase-field model of solid-state sintering for many particles
Authors:
Marco Seiz,
Henrik Hierl,
Britta Nestler
Abstract:
Understanding the microstuctural evolution during the sintering process is of high relevance as it is a key part in many industrial manufacturing processes. Simulations are one avenue to achieve this understanding, especially field-resolved methods such as the phase-field method. Recent papers have shown several weaknesses in the most common phase-field model of sintering, which the present paper…
▽ More
Understanding the microstuctural evolution during the sintering process is of high relevance as it is a key part in many industrial manufacturing processes. Simulations are one avenue to achieve this understanding, especially field-resolved methods such as the phase-field method. Recent papers have shown several weaknesses in the most common phase-field model of sintering, which the present paper aims to ameliorate. The observed weaknesses are shortly recounted, followed by presenting model variations aiming to remove these deficiencies. The models are tested in the classical two-particle geometry, with the most promising model being run on large-scale three-dimensional packings to determine representative volume elements. A densification that is strongly dependent on the packing size is observed, which suggests that the model requires further improvement.
△ Less
Submitted 12 April, 2023;
originally announced April 2023.
-
Simulation of dendritic-eutectic growth with the phase-field method
Authors:
Marco Seiz,
Michael Kellner,
Britta Nestler
Abstract:
Solidification is an important process in many alloy processing routes. The solidified microstructure of alloys is usually made up of dendrites, eutectics or a combination of both. The evolving morphologies are largely determined by the solidification process and thus many materials properties are dependent on the processing conditions. While the growth of either type of microstructure is well-inv…
▽ More
Solidification is an important process in many alloy processing routes. The solidified microstructure of alloys is usually made up of dendrites, eutectics or a combination of both. The evolving morphologies are largely determined by the solidification process and thus many materials properties are dependent on the processing conditions. While the growth of either type of microstructure is well-investigated, there is little information on the coupled growth of both microstructures. This work aims to close this gap by formulating a phase-field model capable of reproducing dendritic, eutectic as well as dendritic-eutectic growth. Following this, two-dimensional simulations are conducted which show all three types of microstructures depending on the composition and processing conditions. The effect of the dendritic-eutectic growth on the microstructural lengths, which determine materials properties, is investigated and the morphological hysteresis between eutectic growth and dendritic-eutectic growth is studied by employing solidification velocity jumps. Further, the influence of primary crystallization is investigated in large-scale two-dimensional simulations. Finally, qualitative three-dimensional simulations are conducted to test for morphological changes in the eutectic.
△ Less
Submitted 10 May, 2023; v1 submitted 20 January, 2023;
originally announced January 2023.
-
Data-driven analysis of grain-growth kinetics in duplex and triplex systems
Authors:
P G Kubendran Amos,
Ramanathan Perumal,
Arnd Koeppe,
Britta Nestler
Abstract:
During grain growth in multiphase system, a convincing understanding on how the evolution kinetics of an individual phase-grains relates to the growth rate of entire microstructure is yet to be achieved. Therefore, in this work, comfortably comprehensible statistical tools are employed to realise the influence of the evolving phase-grains on the overall grain-growth kinetics of multiphase systems,…
▽ More
During grain growth in multiphase system, a convincing understanding on how the evolution kinetics of an individual phase-grains relates to the growth rate of entire microstructure is yet to be achieved. Therefore, in this work, comfortably comprehensible statistical tools are employed to realise the influence of the evolving phase-grains on the overall grain-growth kinetics of multiphase systems, both duplex and triplex, with varying phase-fractions. A dataset capable of rendering statistically significant, and accessible, information is built by modelling, and analysing, grain growth in twenty different polycrystalline systems, comprising of fourteen triplex and five duplex microstructures with varying phase-fractions, and one homogeneous single-phase system, in multiphase-field framework. Statistical analyses of these wide-range of microstructures unravel that, during isotropic grain-growth, the overall evolution kinetics of the duplex and triplex systems are principally governed by the growth-rate of the major-phase grains, irrespective of the phase-fractions. Furthermore, through multiple non-linear regression, it is realised that with increase in the volume-fraction of the major-phase grains, the overall isotropic grain-growth rate exhibited by duplex and triplex microstructures increase in accordance with a definite exponential relation. Additionally, the present investigation unravels that, while the evolution of individual phase-grains during grain growth in triplex microstructures exhibit a level of interdependency, the least interaction is observed between the grains of minor-phases with relatively low volume-fraction.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Explainable artificial intelligence for mechanics: physics-informing neural networks for constitutive models
Authors:
Arnd Koeppe,
Franz Bamer,
Michael Selzer,
Britta Nestler,
Bernd Markert
Abstract:
(Artificial) neural networks have become increasingly popular in mechanics to accelerate computations with model order reduction techniques and as universal models for a wide variety of materials. However, the major disadvantage of neural networks remains: their numerous parameters are challenging to interpret and explain. Thus, neural networks are often labeled as black boxes, and their results o…
▽ More
(Artificial) neural networks have become increasingly popular in mechanics to accelerate computations with model order reduction techniques and as universal models for a wide variety of materials. However, the major disadvantage of neural networks remains: their numerous parameters are challenging to interpret and explain. Thus, neural networks are often labeled as black boxes, and their results often elude human interpretation. In mechanics, the new and active field of physics-informed neural networks attempts to mitigate this disadvantage by designing deep neural networks on the basis of mechanical knowledge. By using this a priori knowledge, deeper and more complex neural networks became feasible, since the mechanical assumptions could be explained. However, the internal reasoning and explanation of neural network parameters remain mysterious.
Complementary to the physics-informed approach, we propose a first step towards a physics-informing approach, which explains neural networks trained on mechanical data a posteriori. This novel explainable artificial intelligence approach aims at elucidating the black box of neural networks and their high-dimensional representations. Therein, the principal component analysis decorrelates the distributed representations in cell states of RNNs and allows the comparison to known and fundamental functions. The novel approach is supported by a systematic hyperparameter search strategy that identifies the best neural network architectures and training parameters. The findings of three case studies on fundamental constitutive models (hyperelasticity, elastoplasticity, and viscoelasticity) imply that the proposed strategy can help identify numerical and analytical closed-form solutions to characterize new materials.
△ Less
Submitted 12 July, 2021; v1 submitted 20 April, 2021;
originally announced April 2021.
-
Morphological stability of three-dimensional cementite rods in polycrystalline system: A phase-field analysis
Authors:
Tobias Mittnacht,
Prince Gideon Kubendran Amos,
Daniel Schneider,
Britta Nestler
Abstract:
Transformations accompanying shape-instability govern the morphological configuration and distribution of the phases in a microstructure. Owing to the influence of the microstructure on the properties of a material, the stability of three-dimensional rods in a representative polycrystalline system is extensively analysed. A multiphase-field model, which recovers the physical laws and sharp-interfa…
▽ More
Transformations accompanying shape-instability govern the morphological configuration and distribution of the phases in a microstructure. Owing to the influence of the microstructure on the properties of a material, the stability of three-dimensional rods in a representative polycrystalline system is extensively analysed. A multiphase-field model, which recovers the physical laws and sharp-interface relations, and includes grain boundary diffusion, is adopted to investigate the morphological evolution of the precipitate. Moreover, the efficiency of the numerical approach is ensured by establishing the volume-preserving chemical equilibrium through the incorporation TCFe8 (CALPHAD) data and solving phase-field evolution in the Allen-Cahn framework. The morphological evolution of the rod in the multiphase system exhibits a unique transformation mechanism which is significantly different from the evolution of an isolated finite-structure. It is realised that, in a polycrystalline arrangement, irrespective of the initial rod-size , the shape-change begins with the energy-minimising events at the triple junctions. This early transformation renders a characteristic morphology at the longitudinal ends of the structure, which introduces sufficient driving-force through the curvature-difference for the subsequent morphological changes. The continued mass transfer to the terminations, ultimately, breaks-off the rod into separate entities that are entangled in the grain boundary. With increasing aspect ratio of the rod, it is identified that the source of mass transfer, which turns into the ovulation site, shifts from the centre. This increases the number of fragmentation events and introduces satellite particle. A comprehensive understanding of the transformation kinetics and mechanism governing the morphological evolution of the rods in a polycrystalline system is rendered in this work.
△ Less
Submitted 16 June, 2020;
originally announced June 2020.
-
Influence of stress-free transformation strain on the autocatalytic growth of bainite: A multiphase-field analysis
Authors:
Ephraim Schoof,
Prince Gideon Kubendran Amos,
Daniel Schneider,
Britta Nestler
Abstract:
Analytical treatments, formulated to predict the rate of the bainite transformation, define autocatalysis as the growth of the subunits at the bainite-austenite interface. Furthermore, the role of the stress-free transformation strain is often translated to a thermodynamic criterion that needs to be fulfilled for the growth of the subunits. In the present work, an elastic phase-field model, which…
▽ More
Analytical treatments, formulated to predict the rate of the bainite transformation, define autocatalysis as the growth of the subunits at the bainite-austenite interface. Furthermore, the role of the stress-free transformation strain is often translated to a thermodynamic criterion that needs to be fulfilled for the growth of the subunits. In the present work, an elastic phase-field model, which elegantly recovers the sharp-interface relations, is employed to comprehensively explicate the effect of the elastic energy on the evolution of the subunits. The primary finding of the current analysis is that the role of eigenstrains in the bainite transformation is apparently complicated to be directly quantified as the thermodynamic constraint. It is realized that the inhomogeneous stress state, induced by the growth of the primary subunit, renders a spatially dependent ill- and well-favored condition for the growth of the secondary subunits. A favorability contour, which encloses the sections that facilitate the elastically preferred growth, is postulated based on the elastic interaction. Through the numerical analyses, the enhanced growth of the subunits within the favorability-contour is verified. Current investigations show that the morphology and size of the elastically preferred region respectively changes and increases with the progressive growth of the subunits.
△ Less
Submitted 21 February, 2020; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Phase-field analysis of quenching and partitioning in a polycrystalline Fe-C system under constrained-carbon equilibrium condition
Authors:
P G Kubendran Amos,
Ephraim Schoof,
Nick Streichan,
Daniel Schneider,
Britta Nestler
Abstract:
Mechanical properties of steels are significantly enhanced by retained austenite. Particularly, it has been shown that a recently developed heat-treatment technique called Quenching and Partitioning (Q\&P) stabilises austenite effectively. In the present work, the phase-field approach is adopted to simulate the phase transformation and carbon diffusion, which respectively accompanies the quenching…
▽ More
Mechanical properties of steels are significantly enhanced by retained austenite. Particularly, it has been shown that a recently developed heat-treatment technique called Quenching and Partitioning (Q\&P) stabilises austenite effectively. In the present work, the phase-field approach is adopted to simulate the phase transformation and carbon diffusion, which respectively accompanies the quenching and partitioning process of the polycrystalline Fe-C system. By incorporating the chemical driving-force from the CALPHAD database, the elastic phase-field model, which recovers the sharp-interface solutions, simulates the martensite (alpha') transformation at three different quenching temperatures. The resulting martensite volume-fractions are in complete agreement with the analytical predictions. For the first time, in this study, the constrained carbon equilibrium (CCE) condition is introduced in the polycrystalline set-up to yield the predicted partitioning endpoints. Under the CCE condition, the carbon partitioning in two alloys of varying composition is analysed through the phase-field model which employs chemical potential as the dynamic variable. The volume fraction and distribution of retained austenite is determined from the carbon distribution and its temporal evolution during the partitioning is investigated. It is identified that in the initial stages of partitioning carbon gets accumulated in the austenite ($γ$) along the $γα'$-interface, owing to the substantial difference in the diffusivities and CCE endpoints. This accumulation stabilises the austenite adjacent to the interface. However, depending on the martensite volume-fraction and the alloy composition, the evolution of the stabilised austenite varies. Furthermore, the influence of the phase distribution on the kinetics of the temporal evolution of retained austenite is elucidated.
△ Less
Submitted 11 December, 2018;
originally announced December 2018.
-
Breakup of liquid jets and the formation of satellite and subsatellite droplets
Authors:
Fei Wang,
Oleg Tschukin,
Gabriel Cadilha Marques,
Michael Selzer,
Jasmin Aghassi-Hagmann,
Britta Nestler
Abstract:
A spontaneous breakup of a liquid jet results in the formation of a chain of droplets, which is a daily observed phenomenon, such as in the raining process and under an open water-faucet. We here report inkjet printing experiments for the formation of droplets which are inconsistent with existing theories and thereafter propose a novel concept of surface area minimization to address the droplet-fo…
▽ More
A spontaneous breakup of a liquid jet results in the formation of a chain of droplets, which is a daily observed phenomenon, such as in the raining process and under an open water-faucet. We here report inkjet printing experiments for the formation of droplets which are inconsistent with existing theories and thereafter propose a novel concept of surface area minimization to address the droplet-formation condition. The novel concept is also capable of predicting the formation of satellite and subsatellite droplets, which cannot be comprehended by the classic Rayleigh theory for the formation of droplets. We also present a new evolution behavior of liquid jets not yet reported before that the jet initially transforms into droplets and then becomes a uniform-radius jet again. The current results can be applied to a variety of disciplines where liquid jets are present.
△ Less
Submitted 17 May, 2018;
originally announced May 2018.
-
Experience Report: Formal Methods in Material Science
Authors:
Bernhard Beckert,
Britta Nestler,
Moritz Kiefer,
Michael Selzer,
Mattias Ulbrich
Abstract:
Increased demands in the field of scientific computation require that algorithms be more efficiently implemented. Maintaining correctness in addition to efficiency is a challenge that software engineers in the field have to face.
In this report we share our first impressions and experiences on the applicability of formal methods to such design challenges arising in the development of scientific…
▽ More
Increased demands in the field of scientific computation require that algorithms be more efficiently implemented. Maintaining correctness in addition to efficiency is a challenge that software engineers in the field have to face.
In this report we share our first impressions and experiences on the applicability of formal methods to such design challenges arising in the development of scientific computation software in the field of material science. We investigated two different algorithms, one for load distribution and one for the computation of convex hulls, and demonstrate how formal methods have been used to discover counterexamples to the correctness of the existing implementations as well as proving the correctness of a revised algorithm. The techniques employed for this include SMT solvers, and automatic and interactive verification tools.
△ Less
Submitted 14 February, 2018; v1 submitted 7 February, 2018;
originally announced February 2018.
-
A Scalable and Extensible Checkpointing Scheme for Massively Parallel Simulations
Authors:
Nils Kohl,
Johannes Hötzer,
Florian Schornbaum,
Martin Bauer,
Christian Godenschwager,
Harald Köstler,
Britta Nestler,
Ulrich Rüde
Abstract:
Realistic simulations in engineering or in the materials sciences can consume enormous computing resources and thus require the use of massively parallel supercomputers. The probability of a failure increases both with the runtime and with the number of system components. For future exascale systems it is therefore considered critical that strategies are developed to make software resilient agains…
▽ More
Realistic simulations in engineering or in the materials sciences can consume enormous computing resources and thus require the use of massively parallel supercomputers. The probability of a failure increases both with the runtime and with the number of system components. For future exascale systems it is therefore considered critical that strategies are developed to make software resilient against failures. In this article, we present a scalable, distributed, diskless, and resilient checkpointing scheme that can create and recover snapshots of a partitioned simulation domain. We demonstrate the efficiency and scalability of the checkpoint strategy for simulations with up to $40$ billion computational cells executing on more than $400$ billion floating point values. A checkpoint creation is shown to require only a few seconds and the new checkpointing scheme scales almost perfectly up to more than $260\,000$ ($2^{18}$) processes. To recover from a diskless checkpoint during runtime, we realize the recovery algorithms using ULFM MPI. The checkpointing mechanism is fully integrated in a state-of-the-art high-performance multi-physics simulation framework. We demonstrate the efficiency and robustness of the method with a realistic phase-field simulation originating in the material sciences and with a lattice Boltzmann method implementation.
△ Less
Submitted 29 January, 2018; v1 submitted 28 August, 2017;
originally announced August 2017.
-
Influence of substrate interaction and confinement on electric field induced transition in symmetric block copolymer thin films
Authors:
Arnab Mukherjee,
Rajdip Mukherjee,
Kumar Ankit,
Avisor Bhattacharya,
Britta Nestler
Abstract:
In the present work, we study morphologies arising due to competing substrate interaction, electric field and confinement effects on a symmetric diblock copolymer. We employ a coarse grained non-local Cahn-Hilliard phenomenological model taking into account the appropriate contributions of substrate interaction and electrostatic field. The proposed model couples the Ohta-Kawasaki functional with M…
▽ More
In the present work, we study morphologies arising due to competing substrate interaction, electric field and confinement effects on a symmetric diblock copolymer. We employ a coarse grained non-local Cahn-Hilliard phenomenological model taking into account the appropriate contributions of substrate interaction and electrostatic field. The proposed model couples the Ohta-Kawasaki functional with Maxwell equation of electrostatics, thus alleviating the need for any approximate solution used in previous studies. We calculate the phase diagram in electric field-substrate strength space for different film thicknesses. In addition to identifying the presence of parallel, perpendicular and mixed lamellae phases similar to analytical calculations, we also find a region in the phase diagram where hybrid morphologies (combination of two phases) coexist. These hybrid morphologies arise either solely due to substrate affinity and confinement or are induced due to the applied electric field. The dependence of the critical fields for transition between the various phases on substrate strength, film thickness and dielectric contrast is discussed. Some preliminary 3D results are also presented to corroborate the presence of hybrid morphologies.
△ Less
Submitted 23 February, 2016;
originally announced February 2016.
-
Massively Parallel Phase-Field Simulations for Ternary Eutectic Directional Solidification
Authors:
Martin Bauer,
Johannes Hötzer,
Philipp Steinmetz,
Marcus Jainta,
Marco Berghoff,
Florian Schornbaum,
Christian Godenschwager,
Harald Köstler,
Britta Nestler,
Ulrich Rüde
Abstract:
Microstructures forming during ternary eutectic directional solidification processes have significant influence on the macroscopic mechanical properties of metal alloys. For a realistic simulation, we use the well established thermodynamically consistent phase-field method and improve it with a new grand potential formulation to couple the concentration evolution. This extension is very compute in…
▽ More
Microstructures forming during ternary eutectic directional solidification processes have significant influence on the macroscopic mechanical properties of metal alloys. For a realistic simulation, we use the well established thermodynamically consistent phase-field method and improve it with a new grand potential formulation to couple the concentration evolution. This extension is very compute intensive due to a temperature dependent diffusive concentration. We significantly extend previous simulations that have used simpler phase-field models or were performed on smaller domain sizes. The new method has been implemented within the massively parallel HPC framework waLBerla that is designed to exploit current supercomputers efficiently. We apply various optimization techniques, including buffering techniques, explicit SIMD kernel vectorization, and communication hiding. Simulations utilizing up to 262,144 cores have been run on three different supercomputing architectures and weak scalability results are shown. Additionally, a hierarchical, mesh-based data reduction strategy is developed to keep the I/O problem manageable at scale.
△ Less
Submitted 4 June, 2015;
originally announced June 2015.
-
Compound droplets on fibers
Authors:
Floriane Weyer,
Marouen Ben Said,
Johannes Hötzer,
Marco Berghoff,
Laurent Dreesen,
Britta Nestler,
Nicolas Vandewalle
Abstract:
Droplets on fibers have been extensively studied in the recent years. Although the equilibrium shapes of simple droplets on fibers are well established, the situation becomes more complex for compound fluidic systems. Through experimental and numerical investigations, we show herein that compound droplets can be formed on fibers and that they adopt specific geometries. We focus on the various cont…
▽ More
Droplets on fibers have been extensively studied in the recent years. Although the equilibrium shapes of simple droplets on fibers are well established, the situation becomes more complex for compound fluidic systems. Through experimental and numerical investigations, we show herein that compound droplets can be formed on fibers and that they adopt specific geometries. We focus on the various contact lines formed at the meeting of the different phases and we study their equilibrium state. It appears that, depending on the surface tensions, the triple contact lines can remain separate or merge together and form quadruple lines. The nature of the contact lines influences the behavior of the compound droplets on fibers. Indeed, both experimental and numerical results show that, during the detachment process, depending on whether the contact lines are triple or quadruple, the characteristic length is the inner droplet radius or the fiber radius.
△ Less
Submitted 24 June, 2015; v1 submitted 20 May, 2015;
originally announced May 2015.
-
Deviations from cooperative growth mode during eutectoid transformation: insights from phase-field approach
Authors:
Kumar Ankit,
Rajdip Mukherjee,
Tobias Mittnacht,
Britta Nestler
Abstract:
The non-cooperative eutectoid transformation relies on the presence of pre-existing cementite particles in the parent austenitic phase and yields a product, popularly known as the divorced eutectoid. In isothermal conditions, two of the important parameters, which influence the transformation mechanism and determine the final morphology are undercooling (below A1 temperature) and inter-particle sp…
▽ More
The non-cooperative eutectoid transformation relies on the presence of pre-existing cementite particles in the parent austenitic phase and yields a product, popularly known as the divorced eutectoid. In isothermal conditions, two of the important parameters, which influence the transformation mechanism and determine the final morphology are undercooling (below A1 temperature) and inter-particle spacing. Although, the criteria which governs the morphological transition from lamellar to divorced is experimentally well established, numerical studies that give a detailed exposition of the non-cooperative transformation mechanism, have not been reported extensively. In the present work, we employ a multiphase-field model, that uses the thermodynamic information from the CALPHAD database, to numerically simulate the pulling-away of the advancing ferrite-austenite interface from cementite, which results in a transition from lamellar to divorced eutectoid morphology in Fe-C alloy. We also identify the onset of a concurrent growth and coarsening regime at small inter-particle spacing and low undercooling. We analyze the simulation results to unravel the essential physics behind this complex spacial and temporal evolution pathway and amend the existing criteria by constructing a Lamellar-Divorced-Coarsening (LDC) map.
△ Less
Submitted 7 August, 2014;
originally announced August 2014.
-
Three-dimensional phase-field study of crack-seal microstructures - Insights from innovative post-processing techniques
Authors:
Kumar Ankit,
Michael Selzer,
Britta Nestler
Abstract:
Numerical simulations of vein evolution contribute to a better understanding of processes involved in their formation and possess the potential to provide invaluable insights into the rock deformation history and fluid flow pathways. The primary aim of the present article is to investigate the influence of a realistic boundary condition, i.e. an algorithmically generated fractal surface, on the ve…
▽ More
Numerical simulations of vein evolution contribute to a better understanding of processes involved in their formation and possess the potential to provide invaluable insights into the rock deformation history and fluid flow pathways. The primary aim of the present article is to investigate the influence of a realistic boundary condition, i.e. an algorithmically generated fractal surface, on the vein evolution in 3-D using a thermodynamically consistent approach, while explaining the benefits of accounting for an extra dimensionality. The 3-D simulation results are supplemented by innovative numerical post-processing and advanced visualization techniques. The new methodologies to measure the tracking efficiency demonstrate the importance of accounting the temporal evolution; no such information is usually accessible in field studies and notoriously difficult to obtain from laboratory experiments as well. The grain growth statistics obtained by numerically post-processing the 3-D computational microstructures explain the pinning mechanism which leads to arrest of grain boundaries/multi-junctions by crack peaks, thereby, enhancing the tracking behavior.
△ Less
Submitted 1 December, 2013;
originally announced December 2013.
-
Phase-field study of grain boundary tracking behavior in crack-seal microstructures
Authors:
Kumar Ankit,
Britta Nestler,
Michael Selzer,
Mathias Reichardt
Abstract:
In order to address the growth of crystals in veins, a multiphase-field model is used to capture the dynamics of crystals precipitating from a super-saturated solution. To gain a detailed understanding of the polycrystal growth phenomena in veins, we investigate the influence of various boundary conditions on crystal growth. In particular, we analyze the formation of vein microstructures resulting…
▽ More
In order to address the growth of crystals in veins, a multiphase-field model is used to capture the dynamics of crystals precipitating from a super-saturated solution. To gain a detailed understanding of the polycrystal growth phenomena in veins, we investigate the influence of various boundary conditions on crystal growth. In particular, we analyze the formation of vein microstructures resulting from the free growth of crystals as well as crack-sealing processes. We define the crystal symmetry by considering the anisotropy in surface energy to simulate crystals with flat facets and sharp corners. The resulting growth competition of crystals with different orientations is studied to deduce a consistent orientation selection rule in the free-growth regime. Using crack-sealing simulations, we correlate the grain boundary tracking behavior depending on the relative rate of crack opening, opening trajectory, initial grain size and wall roughness. Further, we illustrate how these parameters induce the microstructural transition between blocky (crystals growing anisotropically) to fibrous morphology (isotropic) and formation of grain boundaries. The phase-field simulations of crystals in the free-growth regime (in 2D and 3D) indicate that the growth or consumption of a crystal is dependent on the orientation difference with neighboring crystals. The crack-sealing simulation results (in 2D and 3D) reveal that crystals grow isotropically and grain boundaries track the opening trajectory if the wall roughness is high, opening increments are small and crystals touch the wall before the next crack increment starts. Further, we find that within the complete crack-seal regime, anisotropy in surface energy results in the formation of curved/oscillating grain boundaries (instead of straight) when the crack opening velocity is increased and wall roughness is not sufficiently high.
△ Less
Submitted 16 October, 2013; v1 submitted 7 December, 2012;
originally announced December 2012.
-
Theoretical and numerical study of lamellar eutectoid growth influenced by volume diffusion
Authors:
Kumar Ankit,
Abhik Choudhury,
Cheng Qin,
Sebastian Schulz,
Malte McDaniel,
Britta Nestler
Abstract:
We investigate the lamellar growth of pearlite at the expense of austenite during the eutectoid transformation in steel. To begin with, we extend the Jackson-Hunt-type calculation (previously used to analyze eutectic transformation) to eutectoid transformation by accounting for diffusion in all the phases. Our principal finding is that the growth rates in presence of diffusion in all the phases is…
▽ More
We investigate the lamellar growth of pearlite at the expense of austenite during the eutectoid transformation in steel. To begin with, we extend the Jackson-Hunt-type calculation (previously used to analyze eutectic transformation) to eutectoid transformation by accounting for diffusion in all the phases. Our principal finding is that the growth rates in presence of diffusion in all the phases is different as compared to the case when diffusion in growing phases is absent. The difference in the dynamics is described by a factor 'ρ' which comprises of the ratio of the diffusivities of the bulk and the growing phases, along with the ratios of the slopes of the phase co-existence lines. Thereafter, we perform phase-field simulations, the results of which are in agreement with analytical predictions. The phase-field simulations also reveal that diffusion in austenite as well as ferrite leads to the formation of tapered cementite along with an overall increase in the transformation kinetics as compared to diffusion in austenite (only). Finally, it is worth noting that the aim of present work is not to consider the pearlitic transformation in totality, rather it is to isolate and thereby investigate the influence of diffusivity in the growing phases on the front velocity.
△ Less
Submitted 23 August, 2013; v1 submitted 6 December, 2012;
originally announced December 2012.
-
Description of hard sphere crystals and crystal-fluid interfaces: a critical comparison between density functional approaches and a phase field crystal model
Authors:
M. Oettel,
S. Dorosz,
M. Berghoff,
B. Nestler,
T. Schilling
Abstract:
In materials science the phase field crystal approach has become popular to model crystallization processes. Phase field crystal models are in essence Landau-Ginzburg-type models, which should be derivable from the underlying microscopic description of the system in question. We present a study on classical density functional theory in three stages of approximation leading to a specific phase fiel…
▽ More
In materials science the phase field crystal approach has become popular to model crystallization processes. Phase field crystal models are in essence Landau-Ginzburg-type models, which should be derivable from the underlying microscopic description of the system in question. We present a study on classical density functional theory in three stages of approximation leading to a specific phase field crystal model, and we discuss the limits of applicability of the models that result from these approximations. As a test system we have chosen the three--dimensional suspension of monodisperse hard spheres. The levels of density functional theory that we discuss are fundamental measure theory, a second-order Taylor expansion thereof, and a minimal phase-field crystal model. We have computed coexistence densities, vacancy concentrations in the crystalline phase, interfacial tensions and interfacial order parameter profiles, and we compare these quantities to simulation results. We also suggest a procedure to fit the free parameters of the phase field crystal model.
△ Less
Submitted 22 June, 2012;
originally announced June 2012.
-
Theoretical and numerical study of lamellar eutectic three-phase growth in ternary alloys
Authors:
Abhik Choudhury,
Mathis Plapp,
Britta Nestler
Abstract:
We investigate lamellar three-phase patterns that form during the directional solidification of ternary eutectic alloys in thin samples. A distinctive feature of this system is that many different geometric arrangements of the three phases are possible, contrary to the widely studied two-phase patterns in binary eutectics. Here, we first analyze the case of stable lamellar coupled growth of a symm…
▽ More
We investigate lamellar three-phase patterns that form during the directional solidification of ternary eutectic alloys in thin samples. A distinctive feature of this system is that many different geometric arrangements of the three phases are possible, contrary to the widely studied two-phase patterns in binary eutectics. Here, we first analyze the case of stable lamellar coupled growth of a symmetric model ternary eutectic alloy, using a Jackson-Hunt type calculation in thin film morphology, for arbitrary configurations, and derive expressions for the front undercooling as a function of velocity and spacing. Next, we carry out phase-field simulations to test our analytic predictions and to study the instabilities of the simplest periodic lamellar arrays. For large spacings, we observe different oscillatory modes that are similar to those found previously for binary eutectics and that can be classified using the symmetry elements of the steady-state pattern. For small spacings, we observe a new instability that leads to a change in the sequence of the phases. Its onset can be well predicted by our analytic calculations. Finally, some preliminary phase-field simulations of three-dimensional growth structures are also presented.
△ Less
Submitted 24 March, 2011;
originally announced March 2011.
-
Phase Field Modeling of Fracture and Stress Induced Phase Transitions
Authors:
R. Spatschek,
C. Mueller-Gugenberger,
E. Brener,
B. Nestler
Abstract:
We present a continuum theory to describe elastically induced phase transitions between coherent solid phases. In the limit of vanishing elastic constants in one of the phases, the model can be used to describe fracture on the basis of the late stage of the Asaro-Tiller-Grinfeld instability. Starting from a sharp interface formulation we derive the elastic equations and the dissipative interface…
▽ More
We present a continuum theory to describe elastically induced phase transitions between coherent solid phases. In the limit of vanishing elastic constants in one of the phases, the model can be used to describe fracture on the basis of the late stage of the Asaro-Tiller-Grinfeld instability. Starting from a sharp interface formulation we derive the elastic equations and the dissipative interface kinetics. We develop a phase field model to simulate these processes numerically; in the sharp interface limit, it reproduces the desired equations of motion and boundary conditions. We perform large scale simulations of fracture processes to eliminate finite-size effects and compare the results to a recently developed sharp interface method. Details of the numerical simulations are explained, and the generalization to multiphase simulations is presented.
△ Less
Submitted 5 January, 2007;
originally announced January 2007.
-
Phase-field modelling of solute trap** during rapid solidification of a Si-As alloy
Authors:
Denis Danilov,
Britta Nestler
Abstract:
The effect of nonequilibrium solute trap** by a growing solid under rapid solidification conditions is studied using a phase-field model. Considering a continuous steady-state concentration profile across the diffuse solid-liquid interface, a new definition of the nonequilibrium partition coefficient in the phase-field context is introduced. This definition leads, in particular for high growth…
▽ More
The effect of nonequilibrium solute trap** by a growing solid under rapid solidification conditions is studied using a phase-field model. Considering a continuous steady-state concentration profile across the diffuse solid-liquid interface, a new definition of the nonequilibrium partition coefficient in the phase-field context is introduced. This definition leads, in particular for high growth velocities, to a better description of the available experimental data in comparison with other diffuse interface and sharp-interface predictions.
△ Less
Submitted 9 October, 2006; v1 submitted 7 March, 2006;
originally announced March 2006.
-
Dendritic to globular morphology transition in ternary alloy solidification
Authors:
Denis Danilov,
Britta Nestler
Abstract:
The evolution of solidification microstructures in ternary metallic alloys is investigated by adaptive finite element simulations of a general multicomponent phase-field model. A morphological transition from dendritic to globular growth is found by varying the alloy composition at a fixed undercooling. The dependence of the growth velocity and of the impurity segregation in the solid phase on t…
▽ More
The evolution of solidification microstructures in ternary metallic alloys is investigated by adaptive finite element simulations of a general multicomponent phase-field model. A morphological transition from dendritic to globular growth is found by varying the alloy composition at a fixed undercooling. The dependence of the growth velocity and of the impurity segregation in the solid phase on the composition is analyzed and indicates a smooth type of transition between the dendritic and globular growth structures.
△ Less
Submitted 20 January, 2005;
originally announced January 2005.
-
Phase-field simulations of solidification in binary and ternary systems using a finite element method
Authors:
Denis Danilov,
Britta Nestler
Abstract:
We present adaptive finite element simulations of dendritic and eutectic solidification in binary and ternary alloys. The computations are based on a recently formulated phase-field model that is especially appropriate for modelling non-isothermal solidification in multicomponent multiphase systems. In this approach, a set of governing equations for the phase-field variables, for the concentrati…
▽ More
We present adaptive finite element simulations of dendritic and eutectic solidification in binary and ternary alloys. The computations are based on a recently formulated phase-field model that is especially appropriate for modelling non-isothermal solidification in multicomponent multiphase systems. In this approach, a set of governing equations for the phase-field variables, for the concentrations of the alloy components and for the temperature has to be solved numerically, ensuring local entropy production and the conservation of mass and inner energy. To efficiently perform numerical simulations, we developed a numerical scheme to solve the governing equations using a finite element method on an adaptive non-uniform mesh with highest resolution in the regions of the phase boundaries. Simulation results of the solidification in ternary Ni$_{60}$Cu$_{40-x}$Cr$_{x}$ alloys are presented investigating the influence of the alloy composition on the growth morphology and on the growth velocity. A morphology diagram is obtained that shows a transition from a dendritic to a globular structure with increasing Cr concentrations. Furthermore, we comment on 2D and 3D simulations of binary eutectic phase transformations. Regular oscillatory growth structures are observed combined with a topological change of the matrix phase in 3D. An outlook for the application of our methods to describe AlCu eutectics is given.
△ Less
Submitted 27 July, 2004;
originally announced July 2004.