-
Current laboratory performance of starlight suppression systems, and potential pathways to desired Habitable Worlds Observatory exoplanet science capabilities
Authors:
Bertrand Mennesson,
Ruslan Belikov,
Emiel Por,
Eugene Serabyn,
Garreth Ruane,
A. J. Eldorado Riggs,
Dan Sirbu,
Laurent Pueyo,
Remi Soummer,
Jeremy Kasdin,
Stuart Shaklan,
Byoung-Joon Seo,
Christopher Stark,
Eric Cady,
Pin Chen,
Brendan Crill,
Kevin Fogarty,
Alexandra Greenbaum,
Olivier Guyon,
Roser Juanola-Parramon,
Brian Kern,
John Krist,
Bruce Macintosh,
David Marx,
Dimitri Mawet
, et al. (12 additional authors not shown)
Abstract:
We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis t…
▽ More
We summarize the current best polychromatic (10 to 20 % bandwidth) contrast performance demonstrated in the laboratory by different starlight suppression approaches and systems designed to directly characterize exoplanets around nearby stars. We present results obtained by internal coronagraph and external starshade experimental testbeds using entrance apertures equivalent to off-axis or on-axis telescopes, either monolithic or segmented. For a given angular separation and spectral bandwidth, the performance of each starlight suppression system is characterized by the values of raw contrast (before image processing), off-axis (exoplanet) core throughput, and post-calibration contrast (the final 1 sigma detection limit of off-axis point sources, after image processing). To place the current laboratory results in the perspective of the future Habitable Worlds Observatory (HWO) mission, we simulate visible observations of a fiducial Earth/Sun twin system at 12 pc, assuming a 6m (inscribed diameter) collecting aperture and a realistic end-to-end optical throughput. The exposure times required for broadband exoearth detection (20% bandwidth around a wavelength of 0.55 microns) and visible spectroscopic observations (R=70) are then computed assuming various levels of starlight suppression performance, including the values currently demonstrated in the laboratory. Using spectroscopic exposure time as a simple metric, our results point to key starlight suppression system design performance improvements and trades to be conducted in support of HWO exoplanet science capabilities. These trades may be explored via numerical studies, lab experiments, as well as high contrast space-based observations and demonstrations.
△ Less
Submitted 27 April, 2024;
originally announced April 2024.
-
End-to-end numerical modeling of the Roman Space Telescope coronagraph
Authors:
John E. Krist,
John B. Steeves,
Brandon D. Dube,
A. J. Eldorado Riggs,
Brian D. Kern,
David S. Marx,
Eric J. Cady,
Hanying Zhou,
Ilya Y. Poberezhskiy,
Caleb W. Baker,
James P. McGuire,
Bijan Nemati,
Gary M. Kuan,
Bertrand Mennesson,
John T. Trauger,
Navtej S. Saini,
Sergi Hildebrandt Rafels
Abstract:
The Roman Space Telescope will have the first advanced coronagraph in space, with deformable mirrors for wavefront control, low-order wavefront sensing and maintenance, and a photon-counting detector. It is expected to be able to detect and characterize mature, giant exoplanets in reflected visible light. Over the past decade the performance of the coronagraph in its flight environment has been si…
▽ More
The Roman Space Telescope will have the first advanced coronagraph in space, with deformable mirrors for wavefront control, low-order wavefront sensing and maintenance, and a photon-counting detector. It is expected to be able to detect and characterize mature, giant exoplanets in reflected visible light. Over the past decade the performance of the coronagraph in its flight environment has been simulated with increasingly detailed diffraction and structural/thermal finite element modeling. With the instrument now being integrated in preparation for launch within the next few years, the present state of the end-to-end modeling is described, including the measured flight components such as deformable mirrors. The coronagraphic modes are thoroughly described, including characteristics most readily derived from modeling. The methods for diffraction propagation, wavefront control, and structural and thermal finite-element modeling are detailed. The techniques and procedures developed for the instrument will serve as a foundation for future coronagraphic missions such as the Habitable Worlds Observatory.
△ Less
Submitted 27 September, 2023;
originally announced September 2023.
-
The Analytical Performance Model and Error Budget for the Roman Coronagraph Instrument
Authors:
Bijan Nemati,
John Krist,
Ilya Poberezhskiy,
Brian Kern
Abstract:
The Nancy Grace Roman Space Telescope (Roman), under development by NASA, will investigate possible causes for the phenomenon of dark energy and detect and characterize extra-solar planets. The 2.4 m space telescope has two main instruments: a wide-field, infra-red imager and a coronagraph. The coronagraph instrument (CGI) is a technology demonstrator designed to help bridge the gap between the cu…
▽ More
The Nancy Grace Roman Space Telescope (Roman), under development by NASA, will investigate possible causes for the phenomenon of dark energy and detect and characterize extra-solar planets. The 2.4 m space telescope has two main instruments: a wide-field, infra-red imager and a coronagraph. The coronagraph instrument (CGI) is a technology demonstrator designed to help bridge the gap between the current state-of-the-art space and ground instruments and future high-contrast space coronagraphs that will be capable of detecting and characterizing Earth-like planets in the habitable zones of other stars. Using adaptive optics, including two high-density deformable mirrors and low- and high-order wavefront sensing and control, CGI is designed to suppress the star light by up to 9 orders of magnitude, potentially enabling the direct detection and characterization of Jupiter-class exoplanets. Contrast is the measure of starlight suppression, and high contrast is the chief virtue of a coronagraph. But it is not the only important characteristic: contrast must be balanced against acceptance of planet light. The remaining unsuppressed starlight must also have a stable morphology to allow further estimation and subtraction. To achieve all these goals in the presence of the disturbance and radiation environment of space, the coronagraph must be designed and fabricated as a highly optimized system. The CGI error budget is the top level tool used to guide the optimization, enabling trades of various competing errors. The error budget is based on an analytical model which enables rapid calculation and tracking of performance for the numerous and diverse questions that arise in the system engineering process. In this paper we outline the coronagraph system engineering approach and the error budget.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
Micro-arcsecond Astrometry Technology: Detector and Field Distortion Calibration
Authors:
Michael Shao,
Chengxing Zhai,
Bijan Nemati,
Inseob Hahn,
Russell Trahan,
Slava G. Turyshev
Abstract:
Microarcsecond (uas) astrometry is an indispensable technique to detect earth-like exoplanets, fully characterize exoplanetary orbits, and measure their masses --information critical for assessing their habitability. Highly accurate astrometric measurements can also probe the nature of dark matter, the early universe, black holes, and neutron stars, thus providing unique data for new astrophysics.…
▽ More
Microarcsecond (uas) astrometry is an indispensable technique to detect earth-like exoplanets, fully characterize exoplanetary orbits, and measure their masses --information critical for assessing their habitability. Highly accurate astrometric measurements can also probe the nature of dark matter, the early universe, black holes, and neutron stars, thus providing unique data for new astrophysics. This paper presents technologies of calibrating detectors and field distortions for achieving narrow field uas relative astrometry with a focal plane array detector on a 6 m telescope.
△ Less
Submitted 17 April, 2024; v1 submitted 15 December, 2022;
originally announced December 2022.
-
Simulating reflected light coronagraphy of Earth-like exoplanets with a large IR/O/UV space telescope: impact and calibration of smooth exozodiacal dust
Authors:
Jens Kammerer,
Christopher C. Stark,
Kevin J. Ludwick,
Roser Juanola-Parramon,
Bijan Nemati
Abstract:
Observing Earth-like exoplanets orbiting within the habitable zone of Sun-like stars and studying their atmospheres in reflected starlight requires contrasts of $\sim1\mathrm{e}{-10}$ in the visible. At such high contrast, starlight reflected by exozodiacal dust is expected to be a significant source of contamination. Here, we present high-fidelity simulations of coronagraphic observations of a sy…
▽ More
Observing Earth-like exoplanets orbiting within the habitable zone of Sun-like stars and studying their atmospheres in reflected starlight requires contrasts of $\sim1\mathrm{e}{-10}$ in the visible. At such high contrast, starlight reflected by exozodiacal dust is expected to be a significant source of contamination. Here, we present high-fidelity simulations of coronagraphic observations of a synthetic Solar System located at a distance of 10 pc and observed with a 12 m and an 8 m circumscribed aperture diameter space telescope operating at 500 nm wavelength. We explore different techniques to subtract the exozodi and stellar speckles from the simulated images in the face-on, the 30 deg inclined, and the 60 deg inclined case and quantify the remaining systematic noise as a function of the exozodiacal dust level of the system. We find that in the face-on case, the exozodi can be subtracted down to the photon noise limit for exozodi levels up to $\sim1000$ zodi using a simple toy model for the exozodiacal disk, whereas in the 60 deg inclined case this only works up to $\sim50$ zodi. We also investigate the impact of larger wavefront errors and larger system distance, finding that while the former have no significant impact, the latter has a strong (negative) impact. Ultimately, we derive a penalty factor as a function of the exozodi level and system inclination that should be considered in exoplanet yield studies as a realistic estimate for the excess systematic noise from the exozodi.
△ Less
Submitted 6 October, 2022;
originally announced October 2022.
-
Nancy Grace Roman Space Telescope Coronagraph Instrument Observation Calibration Plan
Authors:
Robert T. Zellem,
Bijan Nemati,
Guillermo Gonzalez,
Marie Ygouf,
Vanessa P. Bailey,
Eric J. Cady,
M. Mark Colavita,
Sergi R. Hildebrandt,
Erin R. Maier,
Bertrand Mennesson,
Lindsey Payne,
Neil Zimmerman,
Ruslan Belikov,
Robert J. De Rosa,
John Debes,
Ewan S. Douglas,
Julien Girard,
Tyler Groff,
Jeremy Kasdin,
Patrick J. Lowrance,
Bruce Macintosh,
Daniel Ryan,
Carey Weisberg
Abstract:
NASA's next flagship mission, the Nancy Grace Roman Space Telescope, is a 2.4-meter observatory set to launch no later than May 2027. Roman features two instruments: the Wide Field Imager and the Coronagraph Instrument. Roman's Coronagraph is a Technology Demonstration that will push the current capabilities of direct imaging to smaller contrast ratios ($\sim$10$^{-9}$) and inner-working angles (3…
▽ More
NASA's next flagship mission, the Nancy Grace Roman Space Telescope, is a 2.4-meter observatory set to launch no later than May 2027. Roman features two instruments: the Wide Field Imager and the Coronagraph Instrument. Roman's Coronagraph is a Technology Demonstration that will push the current capabilities of direct imaging to smaller contrast ratios ($\sim$10$^{-9}$) and inner-working angles (3~$λ$/D). In order to achieve this high precision, Roman Coronagraph data must be calibrated to remove as many potential sources of error as possible. Here we present a detailed overview of the Nancy Grace Roman Space Telescope Coronagraph Instrument Observation Calibration Plan including identifying potential sources of error and how they will be mitigated via on-sky calibrations.
△ Less
Submitted 29 July, 2022; v1 submitted 11 February, 2022;
originally announced February 2022.
-
Flatfield Calibrations with Astrophysical Sources for the Nancy Grace Roman Space Telescope's Coronagraph Instrument
Authors:
Erin R. Maier,
Robert T. Zellem,
M. Mark Colavita,
Bertrand Mennesson,
Bijan Nemati,
Vanessa P. Bailey,
Eric J. Cady,
Carey Weisberg,
Daniel Ryan,
Ruslan Belikov,
John Debes,
Julien Girard,
M. Ygouf,
E. S. Douglas,
B. Macintosh
Abstract:
The Nancy Grace Roman Space Telescope Coronagraph Instrument is a high-contrast imager, polarimeter, and spectrometer that will enable the study of exoplanets and circumstellar disks at visible wavelengths ($\sim$550--850~nm) at contrasts 2--3 orders of magnitude better than can currently be achieved by ground or space-based direct imaging facilities. To capitalize on this sensitivity, precise flu…
▽ More
The Nancy Grace Roman Space Telescope Coronagraph Instrument is a high-contrast imager, polarimeter, and spectrometer that will enable the study of exoplanets and circumstellar disks at visible wavelengths ($\sim$550--850~nm) at contrasts 2--3 orders of magnitude better than can currently be achieved by ground or space-based direct imaging facilities. To capitalize on this sensitivity, precise flux calibration will be required. The Roman Coronagraph, like other space-based missions, will use on-orbit flatfields to measure and correct for phenomena that impact the measured total effective throughput. However, the Coronagraph does not have internal lamp sources, therefore we have developed a method to perform flatfield calibrations using observations of extended sources, such as Uranus and Neptune, using a combination of rastering the Coronagraph's Fast Steering Mirror, tiling the planet across the field of view, and matched-filter image processing. Here we outline the process and present the results of simulations using images of Uranus and Neptune from the Hubble Space Telescopes Wide Field Camera 3, in filters approximate to the Coronagraph's Band 1 and Band 4. The simulations are performed over the Coronagraph's direct imaging and polarimetric modes. We model throughput effects in 3 different spatial frequency regimes including 1) high spatial frequency detector pixel-to-pixel quantum efficiency variations, 2) medium spatial frequency "measles" caused by particle deposition on the detector or other focal-plane optics post-launch, and 3) low spatial frequency detector fringing caused by self-interference due to internal reflections in the detector substrate as well as low spatial frequency vignetting at the edges of the Coronagraph's field of view. We show that Uranus and Neptune can be used as astrophysical flat sources with high precision ($\sim$0.5% relative error)
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
Sensitivity of the Roman Coronagraph Instrument to Exozodiacal Dust
Authors:
Ewan S Douglas,
John Debes,
Bertrand Mennesson,
Bijan Nemati,
Jaren Ashcraft,
Bin Ren,
Karl Stapelfeldt,
Dmitry Savransky,
Nikole K. Lewis,
Bruce Macintosh
Abstract:
Exozodiacal dust, warm debris from comets and asteroids in and near the habitable zone of stellar systems, reveals the physical processes that shape planetary systems. Scattered light from this dust is also a source of background flux which must be overcome by future missions to image Earthlike planets. This study quantifies the sensitivity of the Nancy Grace Roman Space Telescope Coronagraph to l…
▽ More
Exozodiacal dust, warm debris from comets and asteroids in and near the habitable zone of stellar systems, reveals the physical processes that shape planetary systems. Scattered light from this dust is also a source of background flux which must be overcome by future missions to image Earthlike planets. This study quantifies the sensitivity of the Nancy Grace Roman Space Telescope Coronagraph to light scattered by exozodi, the zodiacal dust around other stars. Using a sample of 149 nearby stars, previously selected for optimum detection of habitable exoplanets by space observatories, we find the maximum number of exozodiacal disks with observable \textit{inner} habitable zone boundaries is six and the number of observable outer habitable boundaries is 74. One zodi was defined as the visible-light surface brightness of 22 $m_{\rm V}\ $arcsec$^{-2}$ around a solar-mass star, approximating the scattered light brightness in visible light at the Earth-equivalent insolation. In the speckle limited case, where the signal-to-noise ratio is limited by speckle temporal stability rather than shot noise, the median $5σ$ sensitivity to habitable zone exozodi is 12 zodi per resolution element. This estimate is calculated at the inner-working angle of the coronagraph, for the current best estimate performance, neglecting margins on the uncertainty in instrument performance and including a post-processing speckle suppression factor. For an log-norm distribution of exozodi levels with a median exozodi of 3$\times$ the solar zodi, we find that the Roman Coronagraph would be able to make 5$σ$ detections of exozodiacal disks in scattered light from 13 systems with a 95\% confidence interval spanning 7-20 systems. This sensitivity allows Roman Coronagraph to complement ground-based measurements of exozodiacal thermal emission and constrain dust albedos.
△ Less
Submitted 23 December, 2021;
originally announced December 2021.
-
The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) Technology Demonstration
Authors:
N. Jeremy Kasdin,
Vanessa P. Bailey,
Bertrand Mennesson,
Robert T. Zellem,
Marie Ygouf,
Jason Rhodes,
Thomas Luchik,
Feng Zhao,
A J Eldorado Riggs,
Young-Joon Seo,
John Krist,
Brian Kern,
Hong Tang,
Bijan Nemati,
Tyler D. Groff,
Neil Zimmerman,
Bruce Macintosh,
Margaret Turnbull,
John Debes,
Ewan S. Douglas,
Roxana E. Lupu
Abstract:
The Coronagraph Instrument (CGI) on the Nancy Grace Roman Space Telescope will demonstrate the high-contrast technology necessary for visible-light exoplanet imaging and spectroscopy from space via direct imaging of Jupiter-size planets and debris disks. This in-space experience is a critical step toward future, larger missions targeted at direct imaging of Earth-like planets in the habitable zone…
▽ More
The Coronagraph Instrument (CGI) on the Nancy Grace Roman Space Telescope will demonstrate the high-contrast technology necessary for visible-light exoplanet imaging and spectroscopy from space via direct imaging of Jupiter-size planets and debris disks. This in-space experience is a critical step toward future, larger missions targeted at direct imaging of Earth-like planets in the habitable zones of nearby stars. This paper presents an overview of the current instrument design and requirements, highlighting the critical hardware, algorithms, and operations being demonstrated. We also describe several exoplanet and circumstellar disk science cases enabled by these capabilities. A competitively selected Community Participation Program team will be an integral part of the technology demonstration and could perform additional CGI observations beyond the initial tech demo if the instrument performance warrants it.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
A review of simulation and performance modeling for the Roman coronagraph instrument
Authors:
Ewan S. Douglas,
Jaren N. Ashcraft,
Ruslan Belikov,
John Debes,
Jeremy Kasdin,
John Krist,
Brianna I. Lacy,
Bijan Nemati,
Kian Milani,
Leonid Pogorelyuk,
A. J. Eldorado Riggs,
Dmitry Savransky,
Dan Sirbu
Abstract:
The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) will be capable of characterizing exoplanets in reflected light and will demonstrate space technologies essential for future missions to take spectra of Earthlike exoplanets. As the mission and instrument move into the final stages of design, simulation tools spanning from depth of search calculators to detailed diffraction models…
▽ More
The Nancy Grace Roman Space Telescope Coronagraph Instrument (CGI) will be capable of characterizing exoplanets in reflected light and will demonstrate space technologies essential for future missions to take spectra of Earthlike exoplanets. As the mission and instrument move into the final stages of design, simulation tools spanning from depth of search calculators to detailed diffraction models have been created by a variety of teams. We summarize these efforts, with a particular focus on publicly available datasets and software tools. These include speckle and point-spread-function models, signal-to-noise calculators, and science product simulations (e.g. predicted observations of debris disks and exoplanet spectra). This review is intended to serve as a reference to facilitate engagement with the technical and science capabilities of the CGI instrument.
△ Less
Submitted 22 December, 2020;
originally announced December 2020.
-
Paving the Way to Future Missions: the Roman Space Telescope Coronagraph Technology Demonstration
Authors:
B. Mennesson,
R. Juanola-Parramon,
B. Nemati,
G. Ruane,
V. P. Bailey,
M. Bolcar,
S. Martin,
N. Zimmerman,
C. Stark,
L. Pueyo,
D. Benford,
E. Cady,
B. Crill,
E. Douglas,
B. S. Gaudi,
J. Kasdin,
B. Kern,
J. Krist,
J. Kruk,
T. Luchik,
B. Macintosh,
A. Mandell,
D. Mawet,
J. McEnery,
T. Meshkat
, et al. (11 additional authors not shown)
Abstract:
This document summarizes how far the Nancy Grace Roman Space Telescope Coronagraph Instrument (Roman CGI) will go toward demonstrating high-contrast imaging and spectroscopic requirements for potential future exoplanet direct imaging missions, illustrated by the HabEx and LUVOIR concepts. The assessment is made for two levels of assumed CGI performance: (i) current best estimate (CBE) as of August…
▽ More
This document summarizes how far the Nancy Grace Roman Space Telescope Coronagraph Instrument (Roman CGI) will go toward demonstrating high-contrast imaging and spectroscopic requirements for potential future exoplanet direct imaging missions, illustrated by the HabEx and LUVOIR concepts. The assessment is made for two levels of assumed CGI performance: (i) current best estimate (CBE) as of August 2020, based on laboratory results and realistic end-to-end simulations with JPL-standard Model Uncertainty Factors (MUFs); (ii) CGI design specifications inherited from Phase B requirements. We find that the predicted performance (CBE) of many CGI subsystems compares favorably with the needs of future missions, despite providing more modest point source detection limits than future missions. This is essentially due to the challenging pupil of the Roman Space Telescope; this pupil pushes the coronagraph masks sensitivities to misalignments to be commensurate with future missions. In particular, CGI will demonstrate active low-order wavefront control and photon counting capabilities at levels of performance either higher than, or comparable to, the needs of future missions.
△ Less
Submitted 24 September, 2020; v1 submitted 12 August, 2020;
originally announced August 2020.
-
Laboratory Demonstration of Spatial Linear Dark Field Control For Imaging Extrasolar Planets in Reflected Light
Authors:
Thayne Currie,
Eugene Pluzhnik,
Olivier Guyon,
Ruslan Belikov,
Kelsey Miller,
Steven Bos,
Jared Males,
Dan Sirbu,
Charlotte Bond,
Richard Frazin,
Tyler Groff,
Brian Kern,
Julien Lozi,
Benjamin Mazin,
Bijan Nemati,
Barnaby Norris,
Hari Subedi,
Scott Will
Abstract:
Imaging planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo -- i.e. a dark hole -- at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts…
▽ More
Imaging planets in reflected light, a key focus of future NASA missions and ELTs, requires advanced wavefront control to maintain a deep, temporally correlated null of stellar halo -- i.e. a dark hole -- at just several diffraction beam widths. Using the Ames Coronagraph Experiment testbed, we present the first laboratory tests of Spatial Linear Dark Field Control (LDFC) approaching raw contrasts ($\sim$ 5$\times$10$^{-7}$) and separations (1.5--5.2 $λ$/D) needed to image jovian planets around Sun-like stars with space-borne coronagraphs like WFIRST-CGI and image exo-Earths around low-mass stars with future ground-based 30m class telescopes. In four separate experiments and for a range of different perturbations, LDFC largely restores (to within a factor of 1.2--1.7) and maintains a dark hole whose contrast is degraded by phase errors by an order of magnitude. Our implementation of classical speckle nulling requires a factor of 2--5 more iterations and 20--50 DM commands to reach contrasts obtained by spatial LDFC. Our results provide a promising path forward to maintaining dark holes without relying on DM probing and in the low-flux regime, which may improve the duty cycle of high-contrast imaging instruments, increase the temporal correlation of speckles, and thus enhance our ability to image true solar system analogues in the next two decades.
△ Less
Submitted 28 July, 2020;
originally announced July 2020.
-
Performance Verification of the EXtreme PREcision Spectrograph
Authors:
Ryan T. Blackman,
Debra A. Fischer,
Colby A. Jurgenson,
David Sawyer,
Tyler M. McCracken,
Andrew E. Szymkowiak,
Ryan R. Petersburg,
J. M. Joel Ong,
John M. Brewer,
Lily L. Zhao,
Christopher Leet,
Lars A. Buchhave,
René Tronsgaard,
Joe Llama,
Travis Sawyer,
Allen B. Davis,
Samuel H. C. Cabot,
Michael Shao,
Russell Trahan,
Bijan Nemati,
Matteo Genoni,
Giorgio Pariani,
Marco Riva,
Rafael A. Probst,
Ronald Holzwarth
, et al. (3 additional authors not shown)
Abstract:
The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individu…
▽ More
The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individual terms in the instrument error budget. We find that EXPRES can reach a single-measurement instrument calibration precision better than 10 cm/s, not including photon noise from stellar observations. We also report on the performance of the various environmental, mechanical, and optical subsystems of EXPRES, assessing any contributions to radial velocity error. For atmospheric and telescope related effects, this includes the fast tip-tilt guiding system, atmospheric dispersion compensation, and the chromatic exposure meter. For instrument calibration, this includes the laser frequency comb (LFC), flat-field light source, CCD detector, and effects in the optical fibers. Modal noise is mitigated to a negligible level via a chaotic fiber agitator, which is especially important for wavelength calibration with the LFC. Regarding detector effects, we empirically assess the impact on radial velocity precision due to pixel-position non-uniformities (PPNU) and charge transfer inefficiency (CTI). EXPRES has begun its science survey to discover exoplanets orbiting G-dwarf and K-dwarf stars, in addition to transit spectroscopy and measurements of the Rossiter-McLaughlin effect.
△ Less
Submitted 19 March, 2020;
originally announced March 2020.
-
The Habitable Exoplanet Observatory (HabEx) Mission Concept Study Final Report
Authors:
B. Scott Gaudi,
Sara Seager,
Bertrand Mennesson,
Alina Kiessling,
Keith Warfield,
Kerri Cahoy,
John T. Clarke,
Shawn Domagal-Goldman,
Lee Feinberg,
Olivier Guyon,
Jeremy Kasdin,
Dimitri Mawet,
Peter Plavchan,
Tyler Robinson,
Leslie Rogers,
Paul Scowen,
Rachel Somerville,
Karl Stapelfeldt,
Christopher Stark,
Daniel Stern,
Margaret Turnbull,
Rashied Amini,
Gary Kuan,
Stefan Martin,
Rhonda Morgan
, et al. (161 additional authors not shown)
Abstract:
The Habitable Exoplanet Observatory, or HabEx, has been designed to be the Great Observatory of the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable space-based telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars in order to search for signs of habitability and biosignatures. Su…
▽ More
The Habitable Exoplanet Observatory, or HabEx, has been designed to be the Great Observatory of the 2030s. For the first time in human history, technologies have matured sufficiently to enable an affordable space-based telescope mission capable of discovering and characterizing Earthlike planets orbiting nearby bright sunlike stars in order to search for signs of habitability and biosignatures. Such a mission can also be equipped with instrumentation that will enable broad and exciting general astrophysics and planetary science not possible from current or planned facilities. HabEx is a space telescope with unique imaging and multi-object spectroscopic capabilities at wavelengths ranging from ultraviolet (UV) to near-IR. These capabilities allow for a broad suite of compelling science that cuts across the entire NASA astrophysics portfolio. HabEx has three primary science goals: (1) Seek out nearby worlds and explore their habitability; (2) Map out nearby planetary systems and understand the diversity of the worlds they contain; (3) Enable new explorations of astrophysical systems from our own solar system to external galaxies by extending our reach in the UV through near-IR. This Great Observatory science will be selected through a competed GO program, and will account for about 50% of the HabEx primary mission. The preferred HabEx architecture is a 4m, monolithic, off-axis telescope that is diffraction-limited at 0.4 microns and is in an L2 orbit. HabEx employs two starlight suppression systems: a coronagraph and a starshade, each with their own dedicated instrument.
△ Less
Submitted 26 January, 2020; v1 submitted 18 January, 2020;
originally announced January 2020.
-
The Potential of Exozodiacal Disks Observations with the WFIRST Coronagraph Instrument
Authors:
B. Mennesson,
V. Bailey,
J. Kasdin,
J. Trauger,
O. Absil,
R. Akeson,
L. Armus,
J. L. Baudino,
P. Baudoz,
A. Bellini,
D. Bennett,
B. Berriman,
A. Boccaletti,
S. Calchi-Novati,
K. Carpenter,
C. Chen,
W. Danchi,
J. Debes,
D. Defrere,
S. Ertel,
M. Frerking,
C. Gelino,
J. Girard,
T. Groff,
S. Kane
, et al. (38 additional authors not shown)
Abstract:
The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) will be the first high-performance stellar coronagraph using active wavefront control for deep starlight suppression in space, providing unprecedented levels of contrast, spatial resolution, and sensitivity for astronomical observations in the optical. One science case enabled by the CGI will be taking images and(R~50)s…
▽ More
The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) will be the first high-performance stellar coronagraph using active wavefront control for deep starlight suppression in space, providing unprecedented levels of contrast, spatial resolution, and sensitivity for astronomical observations in the optical. One science case enabled by the CGI will be taking images and(R~50)spectra of faint interplanetary dust structures present in the habitable zone of nearby sunlike stars (~10 pc) and within the snow-line of more distant ones(~20pc), down to dust density levels commensurate with that of the solar system zodiacal cloud. Reaching contrast levels below~10-7 for the first time, CGI will cross an important threshold in debris disks physics, accessing disks with low enough optical depths that their structure is dominated by transport phenomena than collisions. Hence, CGI results will be crucial for determining how exozodiacal dust grains are produced and transported in low-density disks around mature stars. Additionally, CGI will be able to measure the brightness level and constrain the degree of asymmetry of exozodiacal clouds around individual nearby sunlike stars in the optical, at the ~10x solar zodiacal emission level. This information will be extremely valuable for optimizing the observational strategy of possible future exo-Earth direct imaging missions, especially those planning to operate at optical wavelengths, such as Habitable Exoplanet Observatory (HabEx) and the Large Ultraviolet/Optical/Infrared Surveyor (LUVOIR).
△ Less
Submitted 4 September, 2019;
originally announced September 2019.
-
The ExoEarth Yield Landscape for Future Direct Imaging Space Telescopes
Authors:
Christopher C. Stark,
Rus Belikov,
Matthew R. Bolcar,
Eric Cady,
Brendan P. Crill,
Steve Ertel,
Tyler Groff,
Sergi Hildebrandt,
John Krist,
P. Douglas Lisman,
Johan Mazoyer,
Bertrand Mennesson,
Bijan Nemati,
Laurent Pueyo,
Bernard J. Rauscher,
A. J. Riggs,
Garreth Ruane,
Stuart B. Shaklan,
Dan Sirbu,
Remi Soummer,
Kathryn St. Laurent,
Neil Zimmerman
Abstract:
The expected yield of potentially Earth-like planets is a useful metric for designing future exoplanet-imaging missions. Recent yield studies of direct-imaging missions have focused primarily on yield methods and trade studies using "toy" models of missions. Here we increase the fidelity of these calculations substantially, adopting more realistic exoplanet demographics as input, an improved targe…
▽ More
The expected yield of potentially Earth-like planets is a useful metric for designing future exoplanet-imaging missions. Recent yield studies of direct-imaging missions have focused primarily on yield methods and trade studies using "toy" models of missions. Here we increase the fidelity of these calculations substantially, adopting more realistic exoplanet demographics as input, an improved target list, and a realistic distribution of exozodi levels. Most importantly, we define standardized inputs for instrument simulations, use these standards to directly compare the performance of realistic instrument designs, include the sensitivity of coronagraph contrast to stellar diameter, and adopt engineering-based throughputs and detector parameters. We apply these new high-fidelity yield models to study several critical design trades: monolithic vs segmented primary mirrors, on-axis vs off-axis secondary mirrors, and coronagraphs vs starshades. We show that as long as the gap size between segments is sufficiently small, there is no difference in yield for coronagraph-based missions with monolithic off-axis telescopes and segmented off-axis telescopes, assuming that the requisite engineering constraints imposed by the coronagraph can be met in both scenarios. We show that there is currently a factor of ~2 yield penalty for coronagraph-based missions with on-axis telescopes compared to off-axis telescopes, and note that there is room for improvement in coronagraph designs for on-axis telescopes. We also reproduce previous results in higher fidelity showing that the yields of coronagraph-based missions continue to increase with aperture size while the yields of starshade-based missions turnover at large apertures if refueling is not possible. Finally, we provide absolute yield numbers with uncertainties that include all major sources of astrophysical noise to guide future mission design.
△ Less
Submitted 26 April, 2019;
originally announced April 2019.
-
Key Technologies for the Wide Field Infrared Survey Telescope Coronagraph Instrument
Authors:
Vanessa P. Bailey,
Lee Armus,
Bala Balasubramanian,
Pierre Baudoz,
Andrea Bellini,
Dominic Benford,
Bruce Berriman,
Aparna Bhattacharya,
Anthony Boccaletti,
Eric Cady,
Sebastiano Calchi Novati,
Kenneth Carpenter,
David Ciardi,
Brendan Crill,
William Danchi,
John Debes,
Richard Demers,
Kjetil Dohlen,
Robert Effinger,
Marc Ferrari,
Margaret Frerking,
Dawn Gelino,
Julien Girard,
Kevin Grady,
Tyler Groff
, et al. (62 additional authors not shown)
Abstract:
The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) is a high-contrast imager and integral field spectrograph that will enable the study of exoplanets and circumstellar disks at visible wavelengths. Ground-based high-contrast instrumentation has fundamentally limited performance at small working angles, even under optimistic assumptions for 30m-class telescopes. There is…
▽ More
The Wide Field Infrared Survey Telescope (WFIRST) Coronagraph Instrument (CGI) is a high-contrast imager and integral field spectrograph that will enable the study of exoplanets and circumstellar disks at visible wavelengths. Ground-based high-contrast instrumentation has fundamentally limited performance at small working angles, even under optimistic assumptions for 30m-class telescopes. There is a strong scientific driver for better performance, particularly at visible wavelengths. Future flagship mission concepts aim to image Earth analogues with visible light flux ratios of more than 10^10. CGI is a critical intermediate step toward that goal, with a predicted 10^8-9 flux ratio capability in the visible. CGI achieves this through improvements over current ground and space systems in several areas: (i) Hardware: space-qualified (TRL9) deformable mirrors, detectors, and coronagraphs, (ii) Algorithms: wavefront sensing and control; post-processing of integral field spectrograph, polarimetric, and extended object data, and (iii) Validation of telescope and instrument models at high accuracy and precision. This white paper, submitted to the 2018 NAS Exoplanet Science Strategy call, describes the status of key CGI technologies and presents ways in which performance is likely to evolve as the CGI design matures.
△ Less
Submitted 13 January, 2019;
originally announced January 2019.
-
The Habitable Exoplanet Observatory (HabEx) Mission Concept Study Interim Report
Authors:
B. Scott Gaudi,
Sara Seager,
Bertrand Mennesson,
Alina Kiessling,
Keith Warfield,
Gary Kuan,
Kerri Cahoy,
John T. Clarke,
Shawn Domagal-Goldman,
Lee Feinberg,
Olivier Guyon,
Jeremy Kasdin,
Dimitri Mawet,
Tyler Robinson,
Leslie Rogers,
Paul Scowen,
Rachel Somerville,
Karl Stapelfeldt,
Christopher Stark,
Daniel Stern,
Margaret Turnbull,
Stefan Martin,
Oscar Alvarez-Salazar,
Rashied Amini,
William Arnold
, et al. (57 additional authors not shown)
Abstract:
For the first time in human history, technologies have matured sufficiently to enable a mission capable of discovering and characterizing habitable planets like Earth orbiting sunlike stars other than the Sun. At the same time, such a platform would enable unique science not possible from ground-based facilities. This science is broad and exciting, ranging from new investigations of our own solar…
▽ More
For the first time in human history, technologies have matured sufficiently to enable a mission capable of discovering and characterizing habitable planets like Earth orbiting sunlike stars other than the Sun. At the same time, such a platform would enable unique science not possible from ground-based facilities. This science is broad and exciting, ranging from new investigations of our own solar system to a full range of astrophysics disciplines.
The Habitable Exoplanet Observatory, or HabEx, is one of four studies currently being undertaken by NASA in preparation for the 2020 Astrophysics Decadal Survey. HabEx has been designed to be the Great Observatory of the 2030s, with community involvement through a competed and funded Guest Observer (GO) program. This interim report describes the HabEx baseline concept, which is a space-based 4-meter diameter telescope mission concept with ultraviolet (UV), optical, and near-infrared (near-IR) imaging and spectroscopy capabilities.
More information on HabEx can be found at https://www.jpl.nasa.gov/habex
△ Less
Submitted 25 September, 2018;
originally announced September 2018.
-
A detector interferometric calibration experiment for high precision astrometry
Authors:
A. Crouzier,
F. Malbet,
F. Henault,
A. Leger,
C. Cara,
J. M. LeDuigou,
O. Preis,
P. Kern,
A. Delboulbe,
G. Martin,
P. Feautrier,
E. Stadler,
S. Lafrasse,
S. Rochat,
C. Ketchazo,
M. Donati,
E. Doumayrou,
P. O. Lagage,
M. Shao,
R. Goullioud,
B. Nemati,
C. Zhai,
E. Behar,
S. Potin,
M. Saint-Pe
, et al. (1 additional authors not shown)
Abstract:
Context: Exoplanet science has made staggering progress in the last two decades, due to the relentless exploration of new detection methods and refinement of existing ones. Yet astrometry offers a unique and untapped potential of discovery of habitable-zone low-mass planets around all the solar-like stars of the solar neighborhood. To fulfill this goal, astrometry must be paired with high precisio…
▽ More
Context: Exoplanet science has made staggering progress in the last two decades, due to the relentless exploration of new detection methods and refinement of existing ones. Yet astrometry offers a unique and untapped potential of discovery of habitable-zone low-mass planets around all the solar-like stars of the solar neighborhood. To fulfill this goal, astrometry must be paired with high precision calibration of the detector.
Aims: We present a way to calibrate a detector for high accuracy astrometry. An experimental testbed combining an astrometric simulator and an interferometric calibration system is used to validate both the hardware needed for the calibration and the signal processing methods. The objective is an accuracy of 5e-6 pixel on the location of a Nyquist sampled polychromatic point spread function.
Methods: The interferometric calibration system produced modulated Young fringes on the detector. The Young fringes were parametrized as products of time and space dependent functions, based on various pixel parameters. The minimization of func- tion parameters was done iteratively, until convergence was obtained, revealing the pixel information needed for the calibration of astrometric measurements.
Results: The calibration system yielded the pixel positions to an accuracy estimated at 4e-4 pixel. After including the pixel position information, an astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more than five pixels. In the static mode (small jitter motion of less than 1e-3 pixel), a photon noise limited precision of 3e-5 pixel was reached.
△ Less
Submitted 8 September, 2016;
originally announced September 2016.
-
The latest results from DICE (Detector Interferometric Calibration Experiment)
Authors:
A. Crouzier,
F. Malbet,
F. Henault,
A. Leger,
C. Cara,
J. M. LeDuigou,
O. Preis,
P. Kern,
A. Delboulbe,
G. Martin,
P. Feautrier,
E. Stadler,
S. Lafrasse,
S. Rochat,
C. Ketchazo,
M. Donati,
E. Doumayrou,
P. O. Lagage,
M. Shao,
R. Goullioud,
B. Nemati,
C. Zhai,
E. Behar,
S. Potin,
M. Saint-Pe
, et al. (1 additional authors not shown)
Abstract:
Theia is an astrometric mission proposed to ESA in 2014 for which one of the scientific objectives is detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. This objective requires the capability to measure stellar centroids at the precision of 1e-5 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 3e-5 pixel at two times N…
▽ More
Theia is an astrometric mission proposed to ESA in 2014 for which one of the scientific objectives is detecting Earth-like exoplanets in the habitable zone of nearby solar-type stars. This objective requires the capability to measure stellar centroids at the precision of 1e-5 pixel. Current state-of-the-art methods for centroid estimation have reached a precision of about 3e-5 pixel at two times Nyquist sampling, this was shown at the JPL by the VESTA experiment. A metrology system was used to calibrate intra and inter pixel quantum efficiency variations in order to correct pixelation errors. The Theia consortium is operating a testbed in vacuum in order to achieve 1e-5 pixel precision for the centroid estimation. The goal is to provide a proof of concept for the precision requirement of the Theia spacecraft.
The testbed consists of two main sub-systems. The first one produces pseudo stars: a blackbody source is fed into a large core fiber and lights-up a pinhole mask in the object plane, which is imaged by a mirror on the CCD. The second sub-system is the metrology, it projects young fringes on the CCD. The fringes are created by two single mode fibers facing the CCD and fixed on the mirror. In this paper we present the latest experiments conducted and the results obtained after a series of upgrades on the testbed was completed. The calibration system yielded the pixel positions to an accuracy estimated at 4e-4 pixel. After including the pixel position information, an astrometric accuracy of 6e-5 pixel was obtained, for a PSF motion over more than 5 pixels. In the static mode (small jitter motion of less than 1e-3 pixel), a photon noise limited precision of 3e-5 pixel was reached.
△ Less
Submitted 1 August, 2016;
originally announced August 2016.
-
Technology advancement of the CCD201-20 EMCCD for the WFIRST coronagraph instrument: sensor characterization and radiation damage
Authors:
Leon K. Harding,
Richard T. Demers,
Michael Hoenk,
Pavani Peddada,
Bijan Nemati,
Michael Cherng,
Darren Michaels,
Leo S. Neat,
Anthony Loc,
Nathan Bush,
David Hall,
Neil Murray,
Jason Gow,
Ross Burgon,
Andrew Holland,
Alice Reinheimer,
Paul R. Jorden,
Douglas Jordand
Abstract:
The Wide Field InfraRed Survey Telescope-Astrophysics Focused Telescope Asset (WFIRST-AFTA) mission is a 2.4-m class space telescope that will be used across a swath of astrophysical research domains. JPL will provide a high-contrast imaging coronagraph instrument - one of two major astronomical instruments. In order to achieve the low noise performance required to detect planets under extremely l…
▽ More
The Wide Field InfraRed Survey Telescope-Astrophysics Focused Telescope Asset (WFIRST-AFTA) mission is a 2.4-m class space telescope that will be used across a swath of astrophysical research domains. JPL will provide a high-contrast imaging coronagraph instrument - one of two major astronomical instruments. In order to achieve the low noise performance required to detect planets under extremely low flux conditions, the electron multiplying charge-coupled device (EMCCD) has been baselined for both of the coronagraph's sensors - the imaging camera and integral field spectrograph. JPL has established an EMCCD test laboratory in order to advance EMCCD maturity to technology readiness level-6. This plan incorporates full sensor characterization, including read noise, dark current, and clock-induced charge. In addition, by considering the unique challenges of the WFIRST space environment, degradation to the sensor's charge transfer efficiency will be assessed, as a result of damage from high-energy particles such as protons, electrons, and cosmic rays. Science-grade CCD201-20 EMCCDs have been irradiated to a proton fluence that reflects the projected WFIRST orbit. Performance degradation due to radiation displacement damage is reported, which is the first such study for a CCD201-20 that replicates the WFIRST conditions. In addition, techniques intended to identify and mitigate radiation-induced electron trap**, such as trap pum**, custom clocking, and thermal cycling, are discussed.
△ Less
Submitted 7 January, 2016;
originally announced January 2016.
-
Exoplanet Exploration Program Analysis Group (ExoPAG) Report to Paul Hertz Regarding Large Mission Concepts to Study for the 2020 Decadal Survey
Authors:
B. Scott Gaudi,
Eric Agol,
Daniel Apai,
Eduardo Bendek,
Alan Boss,
James B. Breckinridge,
David R. Ciardi,
Nicolas B. Cowan,
William C. Danchi,
Shawn Domagal-Goldman,
Jonathan J. Fortney,
Thomas P. Greene,
Lisa Kaltenegger,
James F. Kasting,
David T. Leisawitz,
Alain Leger,
Charles F. Lille,
Douglas P. Lisman,
Amy S. Lo,
Fabian Malbet,
Avi M. Mandell,
Victoria S. Meadows,
Bertrand Mennesson,
Bijan Nemati,
Peter P. Plavchan
, et al. (14 additional authors not shown)
Abstract:
This is a joint summary of the reports from the three Astrophysics Program Analysis Groups (PAGs) in response to the "Planning for the 2020 Decadal Survey" charge given by the Astrophysics Division Director Paul Hertz. This joint executive summary contains points of consensus across all three PAGs. Additional findings specific to the individual PAGs are reported separately in the individual report…
▽ More
This is a joint summary of the reports from the three Astrophysics Program Analysis Groups (PAGs) in response to the "Planning for the 2020 Decadal Survey" charge given by the Astrophysics Division Director Paul Hertz. This joint executive summary contains points of consensus across all three PAGs. Additional findings specific to the individual PAGs are reported separately in the individual reports. The PAGs concur that all four large mission concepts identified in the white paper as candidates for maturation prior to the 2020 Decadal Survey should be studied in detail. These include the Far-IR Surveyor, the Habitable-Exoplanet Imaging Mission, the UV/Optical/IR Surveyor, and the X-ray Surveyor. This finding is predicated upon assumptions outlined in the white paper and subsequent charge, namely that 1) major development of future large flagship missions under consideration are to follow the implementation phases of JWST and WFIRST; 2) NASA will partner with the European Space Agency on its L3 Gravitational Wave Surveyor; 3) the Inflation Probe be classified as a probe-class mission to be developed according to the 2010 Decadal Survey report. If these key assumptions were to change, this PAG finding would need to be re-evaluated. The PAGs find that there is strong community support for the second phase of this activity - maturation of the four proposed mission concepts via Science and Technology Definition Teams (STDTs). The PAGs find that there is strong consensus that all of the STDTs contain broad and interdisciplinary representation of the science community. Finally, the PAGs find that there is community support for a line of Probe-class missions within the Astrophysics mission portfolio (condensed).
△ Less
Submitted 31 December, 2015;
originally announced January 2016.
-
Demonstration of high contrast with an obscured aperture with the WFIRST-AFTA shaped pupil coronagraph
Authors:
Eric Cady,
Camilo Mejia Prada,
Xin An,
Kunjithapatham Balasubramanian,
Rosemary Diaz,
N. Jeremy Kasdin,
Brian Kern,
Andreas Kuhnert,
Bijan Nemati,
Ilya Poberezhskiy,
A. J. Eldorado Riggs,
Robert Zimmer,
Neil Zimmerman
Abstract:
The coronagraph instrument on the WFIRST-AFTA mission study has two coronagraphic architectures, shaped pupil and hybrid Lyot, which may be interchanged for use in different observing scenarios. Each architecture relies on newly-developed mask components to function in the presence of the AFTA aperture, and so both must be matured to a high technology readiness level (TRL) in advance of the missio…
▽ More
The coronagraph instrument on the WFIRST-AFTA mission study has two coronagraphic architectures, shaped pupil and hybrid Lyot, which may be interchanged for use in different observing scenarios. Each architecture relies on newly-developed mask components to function in the presence of the AFTA aperture, and so both must be matured to a high technology readiness level (TRL) in advance of the mission. A series of milestones were set to track the development of the technologies required for the instrument; in this paper, we report on completion of WFIRST-AFTA Coronagraph Milestone 2---a narrowband $10^{-8}$ contrast test with static aberrations for the shaped pupil---and the plans for the upcoming broadband Coronagraph Milestone 5.
△ Less
Submitted 5 November, 2015;
originally announced November 2015.
-
Numerical modelling of the proposed WFIRST-AFTA coronagraphs and their predicted optical performances
Authors:
John Krist,
Bijan Nemati,
Bertrand Mennesson
Abstract:
The WFIRST-AFTA 2.4 m telescope will provide in the next decade the opportunity to host a coronagraph for the imaging and spectroscopy of planets and disks. The telescope, however, is not ideal, given its obscured aperture. Only recently have coronagraph designs been thoroughly investigated that can efficiently work with this configuration. Three coronagraph designs, the hybrid Lyot, the shaped pu…
▽ More
The WFIRST-AFTA 2.4 m telescope will provide in the next decade the opportunity to host a coronagraph for the imaging and spectroscopy of planets and disks. The telescope, however, is not ideal, given its obscured aperture. Only recently have coronagraph designs been thoroughly investigated that can efficiently work with this configuration. Three coronagraph designs, the hybrid Lyot, the shaped pupil, and the phase-induced amplitude-apodization complex mask coronagraph (PIAA-CMC) have been selected for further development by the AFTA project. Real-world testbed demonstrations of these have just begun, so for now the most reliable means of evaluating their potential performance comes from numerical modeling incorporating diffraction propagation, realistic system models, and simulated wavefront sensing and control. Here we present the methods of performance evaluation and results for the current coronagraph designs.
△ Less
Submitted 16 September, 2015;
originally announced September 2015.
-
Wide-Field InfrarRed Survey Telescope-Astrophysics Focused Telescope Assets WFIRST-AFTA 2015 Report
Authors:
D. Spergel,
N. Gehrels,
C. Baltay,
D. Bennett,
J. Breckinridge,
M. Donahue,
A. Dressler,
B. S. Gaudi,
T. Greene,
O. Guyon,
C. Hirata,
J. Kalirai,
N. J. Kasdin,
B. Macintosh,
W. Moos,
S. Perlmutter,
M. Postman,
B. Rauscher,
J. Rhodes,
Y. Wang,
D. Weinberg,
D. Benford,
M. Hudson,
W. -S. Jeong,
Y. Mellier
, et al. (30 additional authors not shown)
Abstract:
This report describes the 2014 study by the Science Definition Team (SDT) of the Wide-Field Infrared Survey Telescope (WFIRST) mission. It is a space observatory that will address the most compelling scientific problems in dark energy, exoplanets and general astrophysics using a 2.4-m telescope with a wide-field infrared instrument and an optical coronagraph. The Astro2010 Decadal Survey recommend…
▽ More
This report describes the 2014 study by the Science Definition Team (SDT) of the Wide-Field Infrared Survey Telescope (WFIRST) mission. It is a space observatory that will address the most compelling scientific problems in dark energy, exoplanets and general astrophysics using a 2.4-m telescope with a wide-field infrared instrument and an optical coronagraph. The Astro2010 Decadal Survey recommended a Wide Field Infrared Survey Telescope as its top priority for a new large space mission. As conceived by the decadal survey, WFIRST would carry out a dark energy science program, a microlensing program to determine the demographics of exoplanets, and a general observing program utilizing its ultra wide field. In October 2012, NASA chartered a Science Definition Team (SDT) to produce, in collaboration with the WFIRST Study Office at GSFC and the Program Office at JPL, a Design Reference Mission (DRM) for an implementation of WFIRST using one of the 2.4-m, Hubble-quality telescope assemblies recently made available to NASA. This DRM builds on the work of the earlier WFIRST SDT, reported by Green et al. (2012) and the previous WFIRST-2.4 DRM, reported by Spergel et. (2013). The 2.4-m primary mirror enables a mission with greater sensitivity and higher angular resolution than the 1.3-m and 1.1-m designs considered previously, increasing both the science return of the primary surveys and the capabilities of WFIRST as a Guest Observer facility. The addition of an on-axis coronagraphic instrument to the baseline design enables imaging and spectroscopic studies of planets around nearby stars.
△ Less
Submitted 13 March, 2015; v1 submitted 12 March, 2015;
originally announced March 2015.
-
Detection of a faint fast-moving near-Earth asteroid using synthetic tracking technique
Authors:
Chengxing Zhai,
Michael Shao,
Bijan Nemati,
Thomas A. Werne,
Hanying Zhou,
Slava G. Turyshev,
Jagmit Sandhu,
Gregg W. Hallinan,
Leon K. Harding
Abstract:
We report a detection of a faint near-Earth asteroid (NEA), which was done using our synthetic tracking technique and the CHIMERA instrument on the Palomar 200-inch telescope. This asteroid, with apparent magnitude of 23, was moving at 5.97 degrees per day and was detected at a signal-to-noise ratio (SNR) of 15 using 30 sec of data taken at a 16.7 Hz frame rate. The detection was confirmed by a se…
▽ More
We report a detection of a faint near-Earth asteroid (NEA), which was done using our synthetic tracking technique and the CHIMERA instrument on the Palomar 200-inch telescope. This asteroid, with apparent magnitude of 23, was moving at 5.97 degrees per day and was detected at a signal-to-noise ratio (SNR) of 15 using 30 sec of data taken at a 16.7 Hz frame rate. The detection was confirmed by a second observation one hour later at the same SNR. The asteroid moved 7 arcseconds in sky over the 30 sec of integration time because of its high proper motion. The synthetic tracking using 16.7 Hz frames avoided the trailing loss suffered by conventional techniques relying on 30-sec exposure, which would degrade the surface brightness of image on CCD to an approximate magnitude of 25. This detection was a result of our 12-hour blind search conducted on the Palomar 200-inch telescope over two nights on September 11 and 12, 2013 scanning twice over six 5.0 deg x 0.043 deg fields. The fact that we detected only one NEA, is consistent with Harris's estimation of the asteroid population distribution, which was used to predict the detection of 1--2 asteroids of absolute magnitude H=28--31 per night. The design of experiment, data analysis method, and algorithms for estimating astrometry are presented. We also demonstrate a milli-arcsecond astrometry using observations of two bright asteroids with the same system on Apr 3, 2013. Strategies of scheduling observations to detect small and fast-moving NEAs with the synthetic tracking technique are discussed.
△ Less
Submitted 18 March, 2014;
originally announced March 2014.
-
Finding Very Small Near-Earth Asteroids using Synthetic Tracking
Authors:
Michael Shao,
Bijan Nemati,
Chengxing Zhai,
Slava G. Turyshev,
Jagmit Sandhu,
Gregg W. Hallinan,
Leon K. Harding
Abstract:
We present an approach that significantly increases the sensitivity for finding and tracking small and fast near Earth asteroids (NEA's). This approach relies on a combined use of a new generation of high-speed cameras which allow short, high frame-rate exposures of moving objects, effectively "freezing" their motion, and a computationally enhanced implementation of the "shift-and-add" data proces…
▽ More
We present an approach that significantly increases the sensitivity for finding and tracking small and fast near Earth asteroids (NEA's). This approach relies on a combined use of a new generation of high-speed cameras which allow short, high frame-rate exposures of moving objects, effectively "freezing" their motion, and a computationally enhanced implementation of the "shift-and-add" data processing technique that helps to improve the signal to noise ratio (SNR) for detection of NEA's. The SNR of a single short exposure of a dim NEA is insufficient to detect it in one frame, but by computationally searching for an appropriate velocity vector, shifting successive frames relative to each other and then co-adding the shifted frames in post-processing, we synthetically create a long-exposure image as if the telescope were tracking the object. This approach, which we call "synthetic tracking," enhances the familiar shift-and-add technique with the ability to do a wide blind search, detect, and track dim and fast-moving NEA's in near real time. We discuss also how synthetic tracking improves the astrometry of fast moving NEA's. We apply this technique to observations of two known asteroids conducted on the Palomar 200-inch telescope and demonstrate improved SNR and 10-fold improvement of astrometric precision over the traditional long exposure approach. In the past 5 years, about 150 NEA's with absolute magnitudes H=28 (~10 m in size) or fainter have been discovered. With an upgraded version of our camera and a field of view of (28 arcmin)^2 on the Palomar 200-inch telescope, synthetic tracking could allow detecting up to 180 such objects per night, including very small NEAs with sizes down to 7 m.
△ Less
Submitted 13 December, 2013; v1 submitted 12 September, 2013;
originally announced September 2013.
-
Simultaneous Exoplanet Characterization and deep wide-field imaging with a diffractive pupil telescope
Authors:
Olivier Guyon,
Josh A. Eisner,
Roger Angel,
Neville J. Woolf,
Eduardo A. Bendek,
Thomas D. Milster,
Stephen M. Ammons,
Michael Shao,
Stuart Shaklan,
Marie Levine,
Bijan Nemati,
Frantz Martinache,
Joe Pitman,
Robert A. Woodruff,
Ruslan Belikov
Abstract:
High-precision astrometry can identify exoplanets and measure their orbits and masses, while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-microarcsecond accuracy astrometric measurements from wide-field images by…
▽ More
High-precision astrometry can identify exoplanets and measure their orbits and masses, while coronagraphic imaging enables detailed characterization of their physical properties and atmospheric compositions through spectroscopy. In a previous paper, we showed that a diffractive pupil telescope (DPT) in space can enable sub-microarcsecond accuracy astrometric measurements from wide-field images by creating faint but sharp diffraction spikes around the bright target star. The DPT allows simultaneous astrometric measurement and coronagraphic imaging, and we discuss and quantify in this paper the scientific benefits of this combination for exoplanet science investigations: identification of exoplanets with increased sensitivity and robustness, and ability to measure planetary masses to high accuracy. We show how using both measurements to identify planets and measure their masses offers greater sensitivity and provides more reliable measurements than possible with separate missions, and therefore results in a large gain in mission efficiency. The combined measurements reliably identify potentially habitable planets in multiple systems with a few observations, while astrometry or imaging alone would require many measurements over a long time baseline. In addition, the combined measurement allows direct determination of stellar masses to percent-level accuracy, using planets as test particles. We also show that the DPT maintains the full sensitivity of the telescope for deep wide-field imaging, and is therefore compatible with simultaneous scientific observations unrelated to exoplanets. We conclude that astrometry, coronagraphy, and deep wide-field imaging can be performed simultaneously on a single telescope without significant negative impact on the performance of any of the three techniques.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
-
High precision astrometry with a diffractive pupil telescope
Authors:
Olivier Guyon,
Eduardo A. Bendek,
Thomas D. Milster,
Josh A. Eisner,
Roger Angel,
Neville J. Woolf,
Stephen M. Ammons,
Michael Shao,
Stuart Shaklan,
Marie Levine,
Bijan Nemati,
Joe Pitman,
Robert A. Woodruff,
Ruslan Belikov
Abstract:
Astrometric detection and mass determination of Earth-mass exoplanets requires sub-microarcsec accuracy, which is theoretically possible with an imaging space telescope using field stars as an astrometric reference. The measurement must however overcome astrometric distortions which are much larger than the photon noise limit. To address this issue, we propose to generate faint stellar diffraction…
▽ More
Astrometric detection and mass determination of Earth-mass exoplanets requires sub-microarcsec accuracy, which is theoretically possible with an imaging space telescope using field stars as an astrometric reference. The measurement must however overcome astrometric distortions which are much larger than the photon noise limit. To address this issue, we propose to generate faint stellar diffraction spikes using a two-dimensional grid of regularly spaced small dark spots added to the surface of the primary mirror (PM). Accurate astrometric motion of the host star is obtained by comparing the position of the spikes to the background field stars. The spikes do not contribute to scattered light in the central part of the field and therefore allow unperturbed coronagraphic observation of the star's immediate surrounding. Because the diffraction spikes are created on the PM and imaged on the same focal plane detector as the background stars, astrometric distortions affect equally the diffraction spikes and the background stars, and are therefore calibrated. We describe the technique, detail how the data collected by the wide-field camera are used to derive astrometric motion, and identify the main sources of astrometric error using numerical simulations and analytical derivations. We find that the 1.4 m diameter telescope, 0.3 sq.deg field we adopt as a baseline design achieves 0.2 microarcsec single measurement astrometric accuracy. The diffractive pupil concept thus enables sub-microarcsec astrometry without relying on the accurate pointing, external metrology or high stability hardware required with previously proposed high precision astrometry concepts.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
-
Micro-pixel accuracy centroid displacement estimation and detector calibration
Authors:
Chengxing Zhai,
Mike Shao,
Renaud Goullioud,
Bijan Nemati
Abstract:
Precise centroid estimation plays a critical role in accurate astrometry using telescope images. Conventional centroid estimation fits a template point spread function (PSF) to the image data. Because the PSF is typically not known to high accuracy due to wavefront aberrations and uncertainties in optical system, a simple Gaussian function is commonly used. PSF knowledge error leads to systematic…
▽ More
Precise centroid estimation plays a critical role in accurate astrometry using telescope images. Conventional centroid estimation fits a template point spread function (PSF) to the image data. Because the PSF is typically not known to high accuracy due to wavefront aberrations and uncertainties in optical system, a simple Gaussian function is commonly used. PSF knowledge error leads to systematic errors in the conventional centroid estimation. In this paper, we present an accurate centroid estimation algorithm by reconstructing the PSF from well sampled (above Nyquist frequency) pixelated images. In the limit of an ideal focal plane array whose pixels have identical response function (no inter-pixel variation), this method can estimate centroid displacement between two 32$\times$32 images to sub-micropixel accuracy. Inter-pixel response variations exist in real detectors, {\it e.g.}~CCDs, which we can calibrate by measuring the pixel response of each pixel in Fourier space. The Fourier transforms of the inter-pixel variations of pixel response functions can be conveniently expressed in terms of powers of spatial wave numbers using their Taylor series expansions. Calibrating up to the third order terms in this expansion, we show that our centroid displacement estimation is accurate to a few micro-pixels using simulated data. This algorithm is applicable to the new proposed mission concept Nearest Earth Astrometry Telescope (NEAT) to achieve mirco-arcsecond accuracy in relative astrometry for detecting terrestrial exoplanets. This technology is also applicable to high precision photometry missions.
△ Less
Submitted 10 February, 2011;
originally announced February 2011.
-
Sub-Microarcsecond Astrometry with SIM-Lite: A Testbed-based Performance Assessment
Authors:
M. Shao,
B. Nemati
Abstract:
SIM-Lite is an astrometric interferometer being designed for sub-microarcsecond astrometry, with a wide range of applications from searches for Earth-analogs to determining the distribution of dark matter. SIM-Lite measurements can be limited by random and systematic errors, as well as astrophysical noise. In this paper we focus on instrument systematic errors and report results from SIM-Lite's…
▽ More
SIM-Lite is an astrometric interferometer being designed for sub-microarcsecond astrometry, with a wide range of applications from searches for Earth-analogs to determining the distribution of dark matter. SIM-Lite measurements can be limited by random and systematic errors, as well as astrophysical noise. In this paper we focus on instrument systematic errors and report results from SIM-Lite's interferometer testbed. We find that, for narrow-angle astrometry such as used for planet finding, the end-of-mission noise floor for SIM-Lite is below 0.035 uas.
△ Less
Submitted 8 December, 2008;
originally announced December 2008.
