-
The CUbesat Solar Polarimeter (CUSP) mission overview
Authors:
Sergio Fabiani,
Ettore Del Monte,
Ilaria Baffo,
Sergio Bonomo,
Daniele Brienza,
Riccardo Campana,
Mauro Centrone,
Gessica Contini,
Enrico Costa,
Giovanni Cucinella,
Andrea Curatolo,
Nicolas De Angelis,
Giovanni De Cesare,
Andrea Del Re,
Sergio Di Cosimo,
Simone Di Filippo,
Alessandro Di Marco,
Giuseppe Di Persio,
Immacolata Donnarumma,
Pierluigi Fanelli,
Paolo Leonetti,
Alfredo Locarini,
Pasqualino Loffredo,
Giovanni Lombardi,
Gabriele Minervini
, et al. (13 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project is a future CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band, by means of a Compton scattering polarimeter. CUSP will allow us to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. The project is in the framework of the Italian Space…
▽ More
The CUbesat Solar Polarimeter (CUSP) project is a future CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band, by means of a Compton scattering polarimeter. CUSP will allow us to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. The project is in the framework of the Italian Space Agency Alcor Program, which aims to develop new CubeSat missions. CUSP is approved for a Phase B study that will last for 12 months, starting in mid-2024. We report on the current status of the CUSP mission project as the outcome of the Phase A.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
The multi$-$physics analysis and design of CUSP, a two CubeSat constellation for Space Weather and Solar flares X-ray polarimetry
Authors:
Giovanni Lombardi,
Sergio Fabiani,
Ettore Del Monte,
Enrico Costa,
Paolo Soffitta,
Fabio Muleri,
Ilaria Baffo,
Marco E. Biancolini,
Sergio Bonomo,
Daniele Brienza,
Riccardo Campana,
Mauro Centrone,
Gessica Contini,
Giovanni Cucinella,
Andrea Curatolo,
Nicolas De Angelis,
Giovanni De Cesare,
Andrea Del Re,
Sergio Di Cosimo,
Simone Di Filippo,
Alessandro Di Marco,
Emanuele Di Meo,
Giuseppe Di Persio,
Immacolata Donnarumma,
Pierluigi Fanelli
, et al. (16 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved f…
▽ More
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved for a Phase B study by the Italian Space Agency in the framework of the Alcor program aimed to develop CubeSat technologies and missions. In this paper we describe the a method for a multi-physical simulation analysis while analyzing some possible design optimization of the payload design solutions adopted. In particular, we report the mechanical design for each structural component, the results of static and dynamic finite element analysis, the preliminary thermo-mechanical analysis for two specific thermal cases (hot and cold orbit) and a topological optimization of the interface between the platform and the payload.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
The evaluation of the CUSP scientific performance by a GEANT4 Monte Carlo simulation
Authors:
Giovanni De Cesare,
Sergio Fabiani,
Riccardo Campana,
Giovanni Lombardi,
Ettore Del Monte,
Enrico Costa,
Ilaria Baffo,
Sergio Bonomo,
Daniele Brienza,
Mauro Centrone,
Gessica Contini,
Giovanni Cucinella,
Andrea Curatolo,
Nicolas De Angelis,
Andrea Del Re,
Sergio Di Cosimo,
Simone Di Filippo,
Alessandro Di Marco,
Giuseppe Di Persio,
Immacolata Donnarumma,
Pierluigi Fanelli,
Paolo Leonetti,
Alfredo Locarini,
Pasqualino Loffredo,
Gabriele Minervini
, et al. (13 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the I…
▽ More
The CUbesat Solar Polarimeter (CUSP) project is a CubeSat mission orbiting the Earth aimed to measure the linear polarization of solar flares in the hard X-ray band by means of a Compton scattering polarimeter. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures of our star. CUSP is a project in the framework of the Alcor Program of the Italian Space Agency aimed to develop new CubeSat missions. It is approved for a Phase B study. In this work, we report on the accurate simulation of the detector's response to evaluate the scientific performance. A GEANT4 Monte Carlo simulation is used to assess the physical interactions of the source photons with the detector and the passive materials. Using this approach, we implemented a detailed CUSP Mass Model. In this work, we report on the evaluation of the detector's effective area as a function of the beam energy.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
Exposing a fibre-based dual-readout calorimeter to a positron beam
Authors:
N. Ampilogov,
S. Cometti,
J. Agarwala,
V. Chmill,
R. Ferrari,
G. Gaudio,
P. Giacomelli,
A. Giaz,
A. Karadzhinova-Ferrer,
A. Loeschcke-Centeno,
A. Negri,
L. Pezzotti,
G. Polesello,
E. Proserpio,
A. Ribon,
R. Santoro,
I. Vivarelli
Abstract:
A prototype of a dual-readout calorimeter using brass capillary tubes surrounding scintillating and clear plastic optical fibres was tested using beams of particles with energies between 10 and 100 GeV produced by the CERN SPS. The scope of the test was to characterise the performance of the tube-based detector response to positrons in terms of linearity, energy resolution, and lateral granularity…
▽ More
A prototype of a dual-readout calorimeter using brass capillary tubes surrounding scintillating and clear plastic optical fibres was tested using beams of particles with energies between 10 and 100 GeV produced by the CERN SPS. The scope of the test was to characterise the performance of the tube-based detector response to positrons in terms of linearity, energy resolution, and lateral granularity. After calibrating the detector and processing the output signal to correct for the energy dependency on the particle impact point, the linearity of the measurement was found to be better than 1\%. The positron response was compared to that predicted by a Geant4-based simulation, finding good agreement both in terms of energy resolution and shower profile. The detector resolution was estimated to be well described by a stochastic term of 14.5\% with a negligible constant term.
△ Less
Submitted 18 September, 2023; v1 submitted 16 May, 2023;
originally announced May 2023.
-
CUSP: a two cubesats constellation for Space Weather and solar flares X-ray polarimetry
Authors:
Sergio Fabiani,
Ilaria Baffo,
Sergio Bonomo,
Gessica Contini,
Enrico Costa,
Giovanni Cucinella,
Giovanni De Cesare,
Ettore Del Monte,
Andrea Del Re,
Sergio Di Cosimo,
Simone Di Filippo,
Alessandro Di Marco,
Pierluigi Fanelli,
Fabio La Monaca,
Alfredo Locarini,
Pasqualino Loffredo,
Giovanni Lombardi,
Gabriele Minervini,
Dario Modenini,
Fabio Muleri,
Andrea Negri,
Massimo Perelli,
John Rankin,
Alda Rubini,
Paolo Soffitta
, et al. (3 additional authors not shown)
Abstract:
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarisation of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved f…
▽ More
The CUbesat Solar Polarimeter (CUSP) project aims to develop a constellation of two CubeSats orbiting the Earth to measure the linear polarisation of solar flares in the hard X-ray band by means of a Compton scattering polarimeter on board of each satellite. CUSP will allow to study the magnetic reconnection and particle acceleration in the flaring magnetic structures. CUSP is a project approved for a Phase A study by the Italian Space Agency in the framework of the Alcor program aimed to develop CubeSat technologies and missions.
△ Less
Submitted 12 August, 2022;
originally announced August 2022.
-
The luminosity of cluster galaxies in the Cluster-EAGLE simulations
Authors:
Andrea Negri,
Claudio Dalla Vecchia,
J. Alfonso L. Aguerri,
Yannick Bahé
Abstract:
We computed the luminosity of simulated galaxies of the C-EAGLE project, a suite of 30 high-resolution zoom-in simulations of galaxy clusters based on the EAGLE simulation. The AB magnitudes are derived for different spectral bands, from ultraviolet to infrared, using the simple stellar population modeling based on the E-MILES stellar spectra library. We take into account obscuration due to dust i…
▽ More
We computed the luminosity of simulated galaxies of the C-EAGLE project, a suite of 30 high-resolution zoom-in simulations of galaxy clusters based on the EAGLE simulation. The AB magnitudes are derived for different spectral bands, from ultraviolet to infrared, using the simple stellar population modeling based on the E-MILES stellar spectra library. We take into account obscuration due to dust in star forming regions and diffuse interstellar medium. The $g-r$ colour-stellar mass diagram, at z=0.1, presents a defined red sequence, reaching $g-r \simeq 0.8$, 0.05 dex redder than EAGLE at high masses, and a well populated blue cloud, when field galaxies are included. The clusters' inner regions are dominated by red-sequence galaxies at all masses, although a non-negligible amount of blue galaxies are still present. We adopt Bayesian inference to compute the clusters LFs, testing for statistical significance of both single and double Schechter functions. The multicolour LFs at z=0 show a knee luminosity that peaks in the infrared and increases with the cluster's mass. The faint-end is weakly dependent on colour and mass and shows an upturn in the optical, bounded between -1.25 and -1.39, just moderately steeper than the field. The simulations reproduce, within the observational errors, the spectroscopic LFs of the Hercules and Abell 85 clusters, including their faint end upturn. C-EAGLE LFs are in broad agreement with observed LFs taken from SDSS and XXL surveys, up to z=0.67, showing a rather flat faint end when the observational constrains are taken into account.
△ Less
Submitted 26 May, 2022;
originally announced May 2022.
-
Short Circuit and Arc Flash Study on a Microgrid Facility
Authors:
K. E. K. Schmitt,
C. A. Negri,
S. Daneshvardehnavi,
S. Bayne,
M. Giesselmann
Abstract:
Arc flash is one of the main hazards when operating an electrical facility. Without correct Personal Protective Equipment, the operator can be subjected to severe including fatal injuries. By code, facilities are required to properly label their electrical equipment that may be accessed by any operator. While energized, the operator proximity to the equipment can provide the necessary potential fo…
▽ More
Arc flash is one of the main hazards when operating an electrical facility. Without correct Personal Protective Equipment, the operator can be subjected to severe including fatal injuries. By code, facilities are required to properly label their electrical equipment that may be accessed by any operator. While energized, the operator proximity to the equipment can provide the necessary potential for an arc flash accident. The labels are mainly responsible for displaying the equipment short circuit and arc flash levels and the minimum PPE level required to operate it. These electrical hazard aspects become more critical in testbed facilities, usually located inside research centers and universities, where the electrical equipment is more frequently accessed by students and researchers. This paper develops complete modeling of a real microgrid testbed facility to perform short circuit and arc flash studies with the main goal to label the devices accessed by the facility researchers.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
Observed versus Simulated Halo c-Mvir Relations
Authors:
Dominik Leier,
Ignacio Ferreras,
Andrea Negri,
Prasenjit Saha
Abstract:
The concentration - virial mass relation is a well-defined trend that reflects the formation of structure in an expanding Universe. Numerical simulations reveal a marked correlation that depends on the collapse time of dark matter halos and their subsequent assembly history. However, observational constraints are mostly limited to the massive end via X-ray emission of the hot diffuse gas in cluste…
▽ More
The concentration - virial mass relation is a well-defined trend that reflects the formation of structure in an expanding Universe. Numerical simulations reveal a marked correlation that depends on the collapse time of dark matter halos and their subsequent assembly history. However, observational constraints are mostly limited to the massive end via X-ray emission of the hot diffuse gas in clusters. An alternative approach, based on gravitational lensing over galaxy scales, revealed an intriguingly high concentration at Milky Way-sized halos. This letter focuses on the robustness of these results by adopting a bootstrap** approach that combines stellar and lensing mass profiles. We also apply the identical methodology to simulated halos from EAGLE to assess any systematic. We bypass several shortcomings of ensemble type lens reconstruction and conclude that the mismatch between observed and simulated concentration-to-virial-mass relations are robust, and need to be explained either invoking a lensing-related sample selection bias, or a careful investigation of the evolution of concentration with assembly history. For reference, at a halo mass of $10^{12} M_\odot$, the concentration of observed lenses is $c_{12}\sim 40\pm 5$, whereas simulations give $c_{12}\sim 15\pm1$.
△ Less
Submitted 7 March, 2022; v1 submitted 12 May, 2021;
originally announced May 2021.
-
Cooling and Timing tests of the ATLAS Fast Tracker VME boards
Authors:
S. Sottocornola,
A. Annovi,
N. V. Biesuz,
E. Brost,
M. Calvetti,
C. Gentsos,
T. Holmes,
L. Horyn,
T. Iizawa,
A. Lanza,
J. D. Long,
P. Mastrandrea,
I. Maznas,
A. Negri,
D. Calabro,
M. Piendibene,
C. Roda,
E. Romano,
T. Seiss
Abstract:
The Fast Tracker (FTK) is an ATLAS trigger upgrade built for full event, low-latency, high-rate tracking. The FTK core, made of 9U VME boards, performs the most demanding computational task. The Associative Memory Board Serial Link Processor (AMB) and the Auxiliary card (AUX), plugged on the front and back sides of the same VME slot, constitute the Processing Unit (PU), which finds tracks using hi…
▽ More
The Fast Tracker (FTK) is an ATLAS trigger upgrade built for full event, low-latency, high-rate tracking. The FTK core, made of 9U VME boards, performs the most demanding computational task. The Associative Memory Board Serial Link Processor (AMB) and the Auxiliary card (AUX), plugged on the front and back sides of the same VME slot, constitute the Processing Unit (PU), which finds tracks using hits from 8 layers of the inner detector. The PU works in pipeline with the Second Stage Board (SSB), which finds 12-layer tracks by adding extra hits to the identified tracks. In the designed configuration, 16 PUs and 4 SSBs are installed in a VME crate. The high power-consumption of the AMB, AUX and SSB (respectively of about 250 W, 70 W and 160 W per board) required the development of a custom cooling system. Even though the expected power consumption for each VME crate of the FTK system is high compared to a common VME setup, the 8 FTK core crates will use $\approx$ 60 kW, which is just a fraction of the power and the space needed for a CPU farm performing the same task. We report on the integration of 32 PUs and 8 SSBs inside the FTK system, on the infrastructures needed to run and cool them, and on the tests performed to verify the system processing rate and the temperature stability at a safe value.
△ Less
Submitted 27 October, 2020;
originally announced October 2020.
-
Evaluating hydrodynamical simulations with green valley galaxies
Authors:
J. Angthopo,
A. Negri,
I. Ferreras,
I. G. de la Rosa,
C. Dalla Vecchia,
A. Pillepich
Abstract:
We test cosmological hydrodynamical simulations of galaxy formation regarding the properties of the Blue Cloud (BC), Green Valley (GV) and Red Sequence (RS), as measured on the 4000$\small{ \mathring {\mathrm A}}$ break strength vs stellar mass plane at $z=0.1$. We analyse the RefL0100N1504 run of EAGLE and the TNG100 run of IllustrisTNG project, by comparing them with the Sloan Digital Sky Survey…
▽ More
We test cosmological hydrodynamical simulations of galaxy formation regarding the properties of the Blue Cloud (BC), Green Valley (GV) and Red Sequence (RS), as measured on the 4000$\small{ \mathring {\mathrm A}}$ break strength vs stellar mass plane at $z=0.1$. We analyse the RefL0100N1504 run of EAGLE and the TNG100 run of IllustrisTNG project, by comparing them with the Sloan Digital Sky Survey, while taking into account selection bias. Our analysis focuses on the GV, within stellar mass $\log\,\mathrm{M_\star/M_{\odot}} \simeq 10-11$, selected from the bimodal distribution of galaxies on the D$_n$(4000) vs stellar mass plane, following Angthopo et al. methodology. Both simulations match the fraction of AGN in the green-valley. However, they over-produce quiescent GV galaxies with respect to observations, with IllustrisTNG yielding a higher fraction of quiescent GV galaxies than EAGLE. In both, GV galaxies have older luminosity-weighted ages with respect to the SDSS, while a better match is found for mass-weighted ages. We find EAGLE GV galaxies quench their star formation early, but undergo later episodes of star formation, matching observations. In contrast, IllustrisTNG GV galaxies have a more extended SFH, and quench more effectively at later cosmic times, producing the excess of quenched galaxies in GV compared with SDSS, based on the 4000$\small{ \mathring {\mathrm A}}$ break strength. These results suggest the AGN feedback subgrid physics, more specifically, the threshold halo mass for black hole input and the black hole seed mass, could be the primary cause of the over-production of quiescent galaxies found with respect to the observational constraints.
△ Less
Submitted 16 March, 2021; v1 submitted 21 October, 2020;
originally announced October 2020.
-
Kinematic analysis of EAGLE simulations: Evolution of $λ_{Re}$ and its connection with mergers and gas accretion
Authors:
Daniel Walo-Martín,
Jesús Falcón-Barroso,
Claudio Dalla Vecchia,
Isabel Pérez,
Andrea Negri
Abstract:
We have developed a new tool to analyse galaxies in the EAGLE simulations as close as possible to observations.We investigated the evolution of their kinematic properties by means of the angular momentum proxy parameter,$ λ_{Re} $for galaxies with $M_{*} \ge 5 \times 10^{9} M_{\odot}$ in the RefL0100N1504 simulation up to redshift two (z = 2). Galaxies in the simulation show a wide variety of kine…
▽ More
We have developed a new tool to analyse galaxies in the EAGLE simulations as close as possible to observations.We investigated the evolution of their kinematic properties by means of the angular momentum proxy parameter,$ λ_{Re} $for galaxies with $M_{*} \ge 5 \times 10^{9} M_{\odot}$ in the RefL0100N1504 simulation up to redshift two (z = 2). Galaxies in the simulation show a wide variety of kinematic features, similiar to those found in integral-field spectroscopic studies. At z=0 the distribution of galaxies in the $λ_{Re}-ε$ plane is also in good agreement with results from observations. Scaling relations at z = 0 indicate that there is critical mass, $M_{crit} = 10^{10.3} M_{\odot}$, that divides two different regimes when we include the $λ_{Re}$ parameter. The simulation shows that the distribution of galaxies in the $λ_{Re}-ε$ plane evolves with time until z = 2 when galaxies are equally distributed both in $λ_{Re}$ and $ε$. We studied the evolution of $λ_{Re}$ with time and found that there is no connection between the angular momentum at z = 2 and z = 0. All systems reach their maximum $λ_{Re}$ at z = 1 and then steadily lose angular momentum regardless of their merger history, except for the high star-forming systems that sustain that maximum value over time. The evolution of the Re in galaxies that have not experienced any merger in the last 10 Gyr can be explained by their level of gas accretion.
△ Less
Submitted 18 April, 2020;
originally announced April 2020.
-
Sub one percent mass fractions of young stars in red massive galaxies
Authors:
Núria Salvador-Rusiñol,
Alexandre Vazdekis,
Francesco La Barbera,
Michael A. Beasley,
Ignacio Ferreras,
Andrea Negri,
Claudio Dalla Vecchia
Abstract:
Early-type galaxies are considered to be the end-products of massive galaxy formation. Optical spectroscopic studies reveal that massive early-type galaxies formed the bulk of their stars over short timescales (1<Gyr) and at high redshift (z>2), followed by passive evolution to the present. However, their optical spectra are insensitive to constrain small episodes of recent star formation, since t…
▽ More
Early-type galaxies are considered to be the end-products of massive galaxy formation. Optical spectroscopic studies reveal that massive early-type galaxies formed the bulk of their stars over short timescales (1<Gyr) and at high redshift (z>2), followed by passive evolution to the present. However, their optical spectra are insensitive to constrain small episodes of recent star formation, since they are dominated by old stars. Fortunately, this problem can be tackled in the ultraviolet range. While recent studies that make use of ultraviolet absorption lines have suggested the presence of young stars in a few early-type galaxies, the age and mass fractions of young stars and their dependence on galaxy mass, is unknown. Here we report a detailed study of these young stellar populations, from high-quality stacked spectra of 28,663 galaxies from the BOSS survey, analysing optical and ultraviolet absorption lines simultaneously. We find that residual star formation is ubiquitous in massive early-type galaxies, measuring average mass fractions of ~0.5% in young stars in the last 2 Gyr of their evolution. This fraction shows a decreasing trend with galaxy stellar mass, consistent with a down-sizing scenario. We also find that synthetic galaxies from state-of-the-art cosmological numerical simulations significantly overproduce both intermediate and young stellar populations. Therefore, our results pose stringent constraints on numerical simulations of galaxy formation.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
AGN feedback and the origin and fate of the hot gas in early-type galaxies
Authors:
S. Pellegrini,
L. Ciotti,
A. Negri,
J. P. Ostriker
Abstract:
A recent determination of the relationships between the X-ray luminosity of the ISM (Lx) and the stellar and total mass, for a sample of nearby early-type galaxies (ETGs), is used to investigate the origin of the hot gas, via a comparison with the results of hydrodynamical simulations of the ISM evolution for a large set of isolated ETGs. After the epoch of major galaxy formation (after z~2), the…
▽ More
A recent determination of the relationships between the X-ray luminosity of the ISM (Lx) and the stellar and total mass, for a sample of nearby early-type galaxies (ETGs), is used to investigate the origin of the hot gas, via a comparison with the results of hydrodynamical simulations of the ISM evolution for a large set of isolated ETGs. After the epoch of major galaxy formation (after z~2), the ISM is replenished by stellar mass losses and SN ejecta, at the rate predicted by stellar evolution, and is depleted by star formation; it is heated by the thermalization of stellar motions, SNe explosions and the mechanical (from winds) and radiative AGN feedback. The models agree well with the observed relations, even for the largely different Lx values at the same mass, thanks to the sensitivity of the gas flow to many galaxy properties; this holds for models including AGN feedback, and those without. Therefore, the mass input from the stellar population is able to account for a major part of the observed Lx; and AGN feedback, while very important to maintain massive ETGs in a time-averaged quasi-steady state, kee** low star formation and the black hole mass, does not dramatically alter the gas content originating in stellar recycled material. These conclusions are based on theoretical predictions for the stellar population contributions in mass and energy, and on a self-consistent modeling of AGN feedback.
△ Less
Submitted 6 February, 2018;
originally announced February 2018.
-
Black hole feeding and feedback: the physics inside the "subgrid"
Authors:
Andrea Negri,
Marta Volonteri
Abstract:
Black holes (BHs) are believed to be a key ingredient of galaxy formation. However, the galaxy-BH interplay is challenging to study due to the large dynamical range and complex physics involved. As a consequence, hydrodynamical cosmological simulations normally adopt sub-grid models to track the unresolved physical processes, in particular BH accretion; usually the spatial scale where the BH domin…
▽ More
Black holes (BHs) are believed to be a key ingredient of galaxy formation. However, the galaxy-BH interplay is challenging to study due to the large dynamical range and complex physics involved. As a consequence, hydrodynamical cosmological simulations normally adopt sub-grid models to track the unresolved physical processes, in particular BH accretion; usually the spatial scale where the BH dominates the hydrodynamical processes (the Bondi radius) is unresolved, and an approximate Bondi-Hoyle accretion rate is used to estimate the growth of the BH. By comparing hydrodynamical simulations at different resolutions (300, 30, 3 pc) using a Bondi-Hoyle approximation to sub-parsec runs with non-parameterized accretion, our aim is to probe how well an approximated Bondi accretion is able to capture the BH accretion physics and the subsequent feedback on the galaxy. We analyse an isolated galaxy simulation that includes cooling, star formation, Type Ia and Type II supernovae, BH accretion and AGN feedback (radiation pressure, Compton heating/cooling) where mass, momentum, and energy are deposited in the interstellar medium through conical winds. We find that on average the approximated Bondi formalism can lead to both over- and under-estimations of the BH growth, depending on resolution and on how the variables entering into the Bondi-Hoyle formalism are calculated.
△ Less
Submitted 7 March, 2017; v1 submitted 15 October, 2016;
originally announced October 2016.
-
The Effect of the AGN Feedback on the Interstellar Medium of Early-Type Galaxies: 2D Hydrodynamical Simulations of the Low-Rotation Case
Authors:
L. Ciotti,
S. Pellegrini,
A. Negri,
J. P. Ostriker
Abstract:
We present 2D hydrodynamical simulations for the evolution of early-type galaxies containing central massive black holes (MBHs), starting at age 2 Gyr. The code contains accurate and physically consistent radiative and mechanical AGN wind feedback, with parsec-scale central resolution. Mass input comes from stellar evolution; energy input includes Type Ia and II supernova and stellar heating; star…
▽ More
We present 2D hydrodynamical simulations for the evolution of early-type galaxies containing central massive black holes (MBHs), starting at age 2 Gyr. The code contains accurate and physically consistent radiative and mechanical AGN wind feedback, with parsec-scale central resolution. Mass input comes from stellar evolution; energy input includes Type Ia and II supernova and stellar heating; star-formation is included. Realistic, axisymmetric dynamical models for the galaxies are built solving the Jeans' equations. The lowest mass models (Mstar = 8 10^{10}Msun) develop global outflows sustained by SNIa's heating, ending with a significantly lower amount of hot gas and new stars. In more massive models, nuclear outbursts last to the present epoch, with large and frequent fluctuations in nuclear emission and from the gas (Lx). Each burst last ~ 10^{7.5} yr, during which (for r < 2-3 kpc) cold, inflowing, and hot, outflowing gas phases coexist. The Lx-T relation for the gas matches that of local galaxies. AGN activity causes positive feedback for star formation. Roughly half of the total mass loss is recycled into new stars (DeltaMstar), just ~ 3% of it is accreted on the MBH, the remainder being ejected from the galaxy. The ratio between the mass of gas expelled to that in to new stars, the load factor, is ~0.6. Rounder galaxies shapes lead to larger final MBH masses, DeltaMstar, and Lx. Almost all the time is spent at very low nuclear luminosities, yet one quarter of the total energy is emitted at an Eddington ratio > 0.1. The duty-cycle of AGN activity approximates 4% (Abridged).
△ Less
Submitted 11 August, 2016;
originally announced August 2016.
-
Star formation in early-type galaxies: the role of stellar winds and kinematics
Authors:
S. Pellegrini,
A. Negri,
L. Ciotti
Abstract:
Early-type galaxies (ETGs) host a hot ISM produced mainly by stellar winds, and heated by Type Ia supernovae and the thermalization of stellar motions. High resolution 2D hydrodynamical simulations showed that ordered rotation in the stellar component results in the formation of a centrifugally supported cold equatorial disc. In a recent numerical investigation we found that subsequent generations…
▽ More
Early-type galaxies (ETGs) host a hot ISM produced mainly by stellar winds, and heated by Type Ia supernovae and the thermalization of stellar motions. High resolution 2D hydrodynamical simulations showed that ordered rotation in the stellar component results in the formation of a centrifugally supported cold equatorial disc. In a recent numerical investigation we found that subsequent generations of stars are formed in this cold disc; this process consumes most of the cold gas, leaving at the present epoch cold masses comparable to those observed. Most of the new stellar mass formed a few Gyrs ago, and resides in a disc.
△ Less
Submitted 2 November, 2015;
originally announced November 2015.
-
AGN feedback and star formation in ETGs: negative and positive feedback
Authors:
L. Ciotti,
J. P. Ostriker,
A. Negri,
S. Pellegrini,
S. Posacki,
G. Novak
Abstract:
AGN feedback from supermassive black holes (SMBHs) at the center of early type galaxies is commonly invoked as the explanation for the quenching of star formation in these systems. The situation is complicated by the significant amount of mass injected in the galaxy by the evolving stellar population over cosmological times. In absence of feedback, this mass would lead to unobserved galactic cooli…
▽ More
AGN feedback from supermassive black holes (SMBHs) at the center of early type galaxies is commonly invoked as the explanation for the quenching of star formation in these systems. The situation is complicated by the significant amount of mass injected in the galaxy by the evolving stellar population over cosmological times. In absence of feedback, this mass would lead to unobserved galactic cooling flows, and to SMBHs two orders of magnitude more massive than observed. By using high-resolution 2D hydrodynamical simulations with radiative transport and star formation in state-of-the-art galaxy models, we show how the intermittent AGN feedback is highly structured on spatial and temporal scales, and how its effects are not only negative (shutting down the recurrent cooling episodes of the ISM), but also positive, inducing star formation in the inner regions of the host galaxy.
△ Less
Submitted 3 November, 2015; v1 submitted 2 November, 2015;
originally announced November 2015.
-
Sequential evacuation strategy for multiple rooms toward the same means of egress
Authors:
Daniel R. Parisi,
Pablo A. Negri
Abstract:
This paper examines different evacuation strategies for systems where several rooms evacuate trough the same means of egress, using microscopic pedestrian simulation.As a case study, a medium-rise office building is considered. It was found that the standard strategy, whereby the simultaneous evacuation of all levels is performed, can be improved by a sequential evacuation, beginning with the lowe…
▽ More
This paper examines different evacuation strategies for systems where several rooms evacuate trough the same means of egress, using microscopic pedestrian simulation.As a case study, a medium-rise office building is considered. It was found that the standard strategy, whereby the simultaneous evacuation of all levels is performed, can be improved by a sequential evacuation, beginning with the lowest floor and continuing successively with each one of the upper floors after a certain delay. The importance of the present research is that it provides the basis for the design and implementation of new evacuation strategies and alarm systems that could significantly improve the evacuation of multiple rooms trough a common means of escape.
△ Less
Submitted 18 December, 2014;
originally announced March 2015.
-
X-ray haloes and star formation in early-type galaxies
Authors:
Andrea Negri,
Silvia Pellegrini,
Luca Ciotti
Abstract:
High resolution 2D hydrodynamical simulations describing the evolution of the hot ISM in axisymmetric two-component models of early-type galaxies well reproduced the observed trends of the X-ray luminosity ($L_\mathrm{x}$) and temperature ($T_\mathrm{x}$) with galaxy shape and rotation, however they also revealed the formation of an exceedingly massive cooled gas disc in rotating systems. In a fol…
▽ More
High resolution 2D hydrodynamical simulations describing the evolution of the hot ISM in axisymmetric two-component models of early-type galaxies well reproduced the observed trends of the X-ray luminosity ($L_\mathrm{x}$) and temperature ($T_\mathrm{x}$) with galaxy shape and rotation, however they also revealed the formation of an exceedingly massive cooled gas disc in rotating systems. In a follow-up of this study, here we investigate the effects of star formation in the disc, including the consequent injection of mass, momentum and energy in the pre-existing interstellar medium. It is found that subsequent generations of stars originate one after the other in the equatorial region; the mean age of the new stars is $> 5$ Gyr, and the adopted recipe for star formation can reproduce the empirical Kennicutt-Schmidt relation. The results of the previous investigation without star formation, concerning $L_\mathrm{x}$ and $T_\mathrm{x}$ of the hot gas, and their trends with galactic shape and rotation, are confirmed. At the same time, the consumption of most of the cold gas disc into new stars leads to more realistic final systems, whose cold gas mass and star formation rate agree well with those observed in the local universe. In particular, our models could explain the observation of kinematically aligned gas in massive, fast-rotating early-type galaxies.
△ Less
Submitted 30 April, 2015; v1 submitted 28 January, 2015;
originally announced January 2015.
-
The effects of galaxy shape and rotation on the X-ray haloes of early-type galaxies - II. Numerical simulations
Authors:
Andrea Negri,
Silvia Posacki,
Silvia Pellegrini,
Luca Ciotti
Abstract:
By means of high resolution 2D hydrodynamical simulations, we study the evolution of the hot ISM for a large set of early-type galaxy models, characterized by various degrees of flattening and internal rotation. The galaxies are described by state-of-the-art axisymmetric two-component models, tailored to reproduce real systems; the dark matter haloes follow the Navarro-Frenk-White or the Einasto p…
▽ More
By means of high resolution 2D hydrodynamical simulations, we study the evolution of the hot ISM for a large set of early-type galaxy models, characterized by various degrees of flattening and internal rotation. The galaxies are described by state-of-the-art axisymmetric two-component models, tailored to reproduce real systems; the dark matter haloes follow the Navarro-Frenk-White or the Einasto profile. The gas is produced by the evolving stars, and heated by Type Ia SNe. We find that, in general, the rotation field of the ISM in rotating galaxies is very similar to that of the stars, with a consequent negligible heating contribution from thermalization of the ordered motions. The relative importance of flattening and rotation in determining the final X-ray luminosity $L_x$ and temperature $T_x$ of the hot haloes is a function of the galactic mass. Flattening and rotation in low mass galaxies favour the establishment of global winds, with the consequent reduction of $L_x$. In medium-to-high mass galaxies, flattening and rotation are not sufficient to induce global winds, however, in the rotating models the nature of the gas flows is deeply affected by conservation of angular momentum, resulting in a reduction of both $L_x$ and $T_x$.
△ Less
Submitted 9 September, 2014; v1 submitted 30 May, 2014;
originally announced June 2014.
-
The effects of stellar dynamics on the X-ray emission of flat early-type galaxies
Authors:
Andrea Negri,
Luca Ciotti,
Silvia Pellegrini
Abstract:
Observational and numerical studies gave hints that the hot gaseous haloes of ETGs may be sensitive to the galaxy internal kinematics. By using high resolution 2D hydro simulations, and realistic two-component (stars plus dark matter) axisymmetric galaxy models, we study the evolution of the hot haloes in a suite of flat ETGs of fixed mass distribution, but with variable amounts of azimuthal veloc…
▽ More
Observational and numerical studies gave hints that the hot gaseous haloes of ETGs may be sensitive to the galaxy internal kinematics. By using high resolution 2D hydro simulations, and realistic two-component (stars plus dark matter) axisymmetric galaxy models, we study the evolution of the hot haloes in a suite of flat ETGs of fixed mass distribution, but with variable amounts of azimuthal velocity dispersion and rotational support, including the possibility of a counter-rotating inner stellar disc. The hot halo is fed by stellar mass losses and heated by SNIa explosions and thermalization of stellar motions. We measure the value of the thermalization parameter gamma (the ratio between the heating due to the relative velocity between the stellar streaming and the ISM bulk flow, and the heating attainable by complete thermalization of the stellar streaming motions). We find that 1) the X-ray emission and the average temperature are larger in fully velocity dispersion supported systems; 2) 0.1<gamma<0.2 for isotropic rotators (with a trend for being larger for lower dark mass models); 3) systems that are isotropic rotators at large radii with an inner counter-rotating disc, or fully velocity dispersion supported systems with an inner rotating disc, have gamma=1, again with a trend to increase for lower dark mass contents. We also find that the lower X-ray luminosities of isotropic rotators cannot be explained just by their low gamma, but are due to the complicated flow structure, consequence of the angular momentum stored at large radii. X-ray emission weighted temperatures and luminosities nicely match observed values; the X-ray isophotes are boxy in case of significant galaxy rotation. Overall, it is found that rotation has an important role to explain the observational result that more rotationally supported ETGs on average show a lower X-ray emission [abridged].
△ Less
Submitted 10 February, 2014; v1 submitted 25 September, 2013;
originally announced September 2013.
-
Disk dynamics and the X-ray emission of S0 and flat early-type galaxies
Authors:
Andrea Negri,
Silvia Pellegrini,
Luca Ciotti
Abstract:
With 2D hydrodynamical simulations, we study the evolution of the hot gas flows in early-type galaxies, focussing on the effects of galaxy rotation on the thermal and dynamical status of the ISM. The galaxy is modelled as a two-component axisymmetric system (stars and dark matter), with a variable amount of azimuthal velocity dispersion and rotational support; the presence of a counter rotating st…
▽ More
With 2D hydrodynamical simulations, we study the evolution of the hot gas flows in early-type galaxies, focussing on the effects of galaxy rotation on the thermal and dynamical status of the ISM. The galaxy is modelled as a two-component axisymmetric system (stars and dark matter), with a variable amount of azimuthal velocity dispersion and rotational support; the presence of a counter rotating stellar disk is also considered. It is found that the ISM of the rotationally supported (isotropic) model is more prone to thermal instabilities than the fully velocity dispersion counterpart, while its ISM temperature and X-ray luminosity are lower. The model with counter rotation shows an intermediate behaviour.
△ Less
Submitted 27 February, 2013;
originally announced February 2013.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions im**ing on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.
-
Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics
Authors:
The ATLAS Collaboration,
G. Aad,
E. Abat,
B. Abbott,
J. Abdallah,
A. A. Abdelalim,
A. Abdesselam,
O. Abdinov,
B. Abi,
M. Abolins,
H. Abramowicz,
B. S. Acharya,
D. L. Adams,
T. N. Addy,
C. Adorisio,
P. Adragna,
T. Adye,
J. A. Aguilar-Saavedra,
M. Aharrouche,
S. P. Ahlen,
F. Ahles,
A. Ahmad,
H. Ahmed,
G. Aielli,
T. Akdogan
, et al. (2587 additional authors not shown)
Abstract:
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on…
▽ More
A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.
△ Less
Submitted 14 August, 2009; v1 submitted 28 December, 2008;
originally announced January 2009.
-
Supervision of the ATLAS High Level Trigger System
Authors:
S. Wheeler,
J. Flammer,
C. Meessen,
Z. Qian,
F. Touchard,
France A. Negri,
H. Zobernig
Abstract:
The ATLAS High Level Trigger (HLT) system provides software-based event selection after the initial LVL1 hardware trigger. It is composed of two stages, the LVL2 trigger and the Event Filter. The HLT is implemented as software tasks running on large processor farms. An essential part of the HLT is the supervision system, which is responsible for configuring, coordinating, controlling and monitor…
▽ More
The ATLAS High Level Trigger (HLT) system provides software-based event selection after the initial LVL1 hardware trigger. It is composed of two stages, the LVL2 trigger and the Event Filter. The HLT is implemented as software tasks running on large processor farms. An essential part of the HLT is the supervision system, which is responsible for configuring, coordinating, controlling and monitoring the many hundreds of processes running in the HLT. A prototype implementation of the supervision system, using tools from the ATLAS Online Software system is presented. Results from scalability tests are also presented where the supervision system was shown to be capable of controlling over 1000 HLT processes running on 230 nodes.
△ Less
Submitted 28 May, 2003;
originally announced May 2003.
