-
Empirical Exploration of Deformation Mechanisms in Deep Rock Exposed to Multiple Stresses
Authors:
Ali Nassiri
Abstract:
To avoid the impact of inherent natural imperfections on experimental outcomes during testing, a recently designed genuine triaxial apparatus has enabled the replication of conditions where the three principal stresses exhibit varying magnitudes. This setup facilitates the examination of fracture behaviors in materials similar to the 4-series under genuine triaxial stress states. The experimental…
▽ More
To avoid the impact of inherent natural imperfections on experimental outcomes during testing, a recently designed genuine triaxial apparatus has enabled the replication of conditions where the three principal stresses exhibit varying magnitudes. This setup facilitates the examination of fracture behaviors in materials similar to the 4-series under genuine triaxial stress states. The experimental findings revealed that the maximum strength experiences significant influence from the minimum principal stress and the intermediate principal stress in genuine triaxial stress conditions. Specifically, for a fixed minimum principal stress (σ3), there is a progressive reduction in peak strain as the intermediate principal stress (σ2) increases. Moreover, as the minimum principal stress (σ3) rises, the magnitude of peak strain diminishes. The Young's modulus of the specimens exhibits an exponential increase with the augmentation of confining pressure, and it demonstrates a linear growth pattern as the intermediate principal stress increases. Additionally, the cohesion force is observed to rise while the internal friction angle decreases with the elevation of the intermediate principal stress. The failure modes of the specimens in genuine triaxial stress conditions can be categorized into three types, all of which exhibit a specific angle between the fracture surface and σ3, ranging from 50 to 62 degrees. Furthermore, a comparison between the computed range and the actual measurement range of the fracture angle highlights several limitations in the relationship between the fracture angle (θ) and the internal friction angle (φ) within the Coulomb criterion, particularly in rocks containing complex fracture systems.
△ Less
Submitted 7 October, 2023;
originally announced October 2023.
-
Knowledge Graph Refinement based on Triplet BERT-Networks
Authors:
Armita Khajeh Nassiri,
Nathalie Pernelle,
Fatiha Sais,
Gianluca Quercini
Abstract:
Knowledge graph embedding techniques are widely used for knowledge graph refinement tasks such as graph completion and triple classification. These techniques aim at embedding the entities and relations of a Knowledge Graph (KG) in a low dimensional continuous feature space. This paper adopts a transformer-based triplet network creating an embedding space that clusters the information about an ent…
▽ More
Knowledge graph embedding techniques are widely used for knowledge graph refinement tasks such as graph completion and triple classification. These techniques aim at embedding the entities and relations of a Knowledge Graph (KG) in a low dimensional continuous feature space. This paper adopts a transformer-based triplet network creating an embedding space that clusters the information about an entity or relation in the KG. It creates textual sequences from facts and fine-tunes a triplet network of pre-trained transformer-based language models. It adheres to an evaluation paradigm that relies on an efficient spatial semantic search technique. We show that this evaluation protocol is more adapted to a few-shot setting for the relation prediction task. Our proposed GilBERT method is evaluated on triplet classification and relation prediction tasks on multiple well-known benchmark knowledge graphs such as FB13, WN11, and FB15K. We show that GilBERT achieves better or comparable results to the state-of-the-art performance on these two refinement tasks.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
RF Accelerator Technology R&D: Report of AF7-rf Topical Group to Snowmass 2021
Authors:
Sergey Belomestnykh,
Emilio A. Nanni,
Hans Weise,
Sergey V. Baryshev,
Pashupati Dhakal,
Rongli Geng,
Bianca Giaccone,
Chunguang **g,
Matthias Liepe,
Xueying Lu,
Tianhuan Luo,
Ganapati Myneni,
Alireza Nassiri,
David Neuffer,
Cho-Kuen Ng,
Sam Posen,
Sami Tantawi,
Anne-Marie Valente-Feliciano,
Jean-Luc Vay,
Brandon Weatherford,
Akira Yamamoto
Abstract:
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existi…
▽ More
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existing facilities, improvements to accelerators already under construction (e.g., PIP-II), well-developed proposals (e.g., ILC, CLIC), and/or enable concepts under development, such as FCC-ee, CEPC, C3, HELEN, multi-MW Fermilab Proton Intensity Upgrade, future Muon Colloder, etc. Advances in RF technology have impact beyond HEP on accelerators built for nuclear physics, basic energy sciences, and other areas. Recent examples of such accelerators are European XFEL, LCLS-II and LCLS-II-HE, SHINE, SNS, ESS, FRIB, and EIC. To support and enable new accelerator-based applications and even make some of them feasible, we must continue addressing their challenges via a comprehensive RF R&D program that would advance the existing RF technologies and explore the nascent ones.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
Integrated photoelasticity in a soft material: phase retardation, azimuthal angle and stress-optic coefficient
Authors:
Yuto Yokoyama,
Benjamin R. Mitchell,
Ali Nassiri,
Brad L. Kinsey,
Yannis P. Korkolis,
Yoshiyuki Tagawa
Abstract:
Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm depending on the loading forces. The resulting photoelastic parameters (phase retardation, azimuthal angle, and stress-optic coefficient) in the gel are measured…
▽ More
Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm depending on the loading forces. The resulting photoelastic parameters (phase retardation, azimuthal angle, and stress-optic coefficient) in the gel are measured using a polarization camera. The measured retardation and azimuth are compared with the analytical prediction based on Hertzian contact theory. Remarkably, experimental and analytical results of the photoelastic parameters show a reasonable agreement not only in the retardation but also in the azimuth that is related to the direction of principal stresses and but rarely validated in previous studies, is essential for reconstructing three-dimensional stress fields in soft materials. The stress-optic coefficient of the gelatin gel used is 3.12$\times10^{-8}$ 1/Pa. Such findings proved that integrated photoelasticity is useful for measuring the three-dimensional stress field in soft materials, which is of importance in biomedical engineering and cell printing applications.
△ Less
Submitted 8 July, 2022;
originally announced August 2022.
-
An investigation of Hertzian contact in soft materials using photoelastic tomography
Authors:
Benjamin Mitchell,
Yuto Yokoyama,
Ali Nassiri,
Yoshiyuki Tagawa,
Yannis Korkolis,
Brad Kinsey
Abstract:
Hertzian contact of a rigid sphere and a highly deformable soft solid is investigated using integrated photoelasticity. The experiments are performed by pressing a styrene sphere of 15 mm diameter against a 44 x 44 x 47 mm$^3$ cuboid made of 5% wt. gelatin, inside a circular polariscope, and with a range of forces. The emerging light rays are processed by considering that the retardation of each r…
▽ More
Hertzian contact of a rigid sphere and a highly deformable soft solid is investigated using integrated photoelasticity. The experiments are performed by pressing a styrene sphere of 15 mm diameter against a 44 x 44 x 47 mm$^3$ cuboid made of 5% wt. gelatin, inside a circular polariscope, and with a range of forces. The emerging light rays are processed by considering that the retardation of each ray carries the cumulative effect of traversing the contact-induced axisymmetric stress field. Then, assuming Hertzian theory is valid, the retardation is analytically calculated for each ray and compared to the experimental one. Furthermore, a finite element model of the process introduces the effect of finite displacements and strains. Beyond the qualitative comparison of the retardation fields, the experimental, theoretical, and numerical results are quantitatively compared in terms of the maximum equivalent stress, surface displacement, and contact radius dimensions. A favorable agreement is found at lower force levels, where the assumptions of Hertz theory hold, whereas deviations are observed at higher force levels. A major discovery of this work is that at the maximum equivalent stress location, all three components of principal stress can be determined experimentally, and show satisfactory agreement with theoretical and numerical ones in our measurement range. This provides valuable insight into Hertzian contact problems since the maximum equivalent stress controls the initiation of plastic deformation or failure. The measured displacement and contact radii also reasonably agree with the theoretical and numerical ones. Finally, the limitations that arise due to the linearization of this problem are explored.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
Key directions for research and development of superconducting radio frequency cavities
Authors:
S. Belomestnykh,
S. Posen,
D. Bafia,
S. Balachandran,
M. Bertucci,
A. Burrill,
A. Cano,
M. Checchin,
G. Ciovati,
L. D. Cooley,
G. Dalla Lana Semione,
J. Delayen,
G. Eremeev,
F. Furuta,
F. Gerigk,
B. Giaccone,
D. Gonnella,
A. Grassellino,
A. Gurevich,
W. Hillert,
M. Iavarone,
J. Knobloch,
T. Kubo,
W. K. Kwok,
R. Laxdal
, et al. (31 additional authors not shown)
Abstract:
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and…
▽ More
Radio frequency superconductivity is a cornerstone technology for many future HEP particle accelerators and experiments from colliders to proton drivers for neutrino facilities to searches for dark matter. While the performance of superconducting RF (SRF) cavities has improved significantly over the last decades, and the SRF technology has enabled new applications, the proposed HEP facilities and experiments pose new challenges. To address these challenges, the field continues to generate new ideas and there seems to be a vast room for improvements. In this paper we discuss the key research directions that are aligned with and address the future HEP needs.
△ Less
Submitted 21 August, 2022; v1 submitted 3 April, 2022;
originally announced April 2022.
-
C$^3$ Demonstration Research and Development Plan
Authors:
Emilio A. Nanni,
Martin Breidenbach,
Caterina Vernieri,
Sergey Belomestnykh,
Pushpalatha Bhat,
Sergei Nagaitsev,
Mei Bai,
William Berg,
Tim Barklow,
John Byrd,
Ankur Dhar,
Ram C. Dhuley,
Chris Doss,
Joseph Duris,
Auralee Edelen,
Claudio Emma,
Josef Frisch,
Annika Gabriel,
Spencer Gessner,
Carsten Hast,
Chunguang **g,
Arkadiy Klebaner,
Anatoly K. Krasnykh,
John Lewellen,
Matthias Liepe
, et al. (25 additional authors not shown)
Abstract:
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced stat…
▽ More
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, dam** ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.
△ Less
Submitted 6 July, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Advances in Numerical Simulation of High-Speed Impact Welding
Authors:
Ali Nassiri,
Tim Abke,
Glenn Daehn
Abstract:
Numerical simulations of high-speed forming and welding are of significant interest to industry, but are challenging due to the coupled physics and dynamic nature of the processes. With the advancement in hardware and computational capabilities, the next generation of computational methods, so called meshless methods, have received significant attention. Among all meshless methods, smoothed partic…
▽ More
Numerical simulations of high-speed forming and welding are of significant interest to industry, but are challenging due to the coupled physics and dynamic nature of the processes. With the advancement in hardware and computational capabilities, the next generation of computational methods, so called meshless methods, have received significant attention. Among all meshless methods, smoothed particle hydrodynamics (SPH) has received major consideration. The main advantage of the SPH method is to bypass the requirement for a numerical grid to calculate spatial derivatives. This avoids severe problems associated with mesh tangling and distortion which usually occur in Lagrangian analysis involving high-strain-rate events. In this study to better understand the effects of oxide layer, coating and diffused materials on weldability, a novel hybrid SPH platform was developed. Then, the high-speed impact between Steel/Steel, Copper/Titanium, and Aluminum/Steel were simulated. To experimentally validate the numerical efforts, results were compared to vaporizing foil actuator welding and explosive welding tests. Good agreement between the numerical simulations and experimental results provided confidence in the numerical modeling.
△ Less
Submitted 2 October, 2019;
originally announced December 2019.
-
Response of Carbon Nanotube (CNT) Ply Subjected to a Pulsed Magnetic Field
Authors:
Ali Nassiri,
Brad Kinsey
Abstract:
In this study, the possible deformation of a single Carbon Nanotube (CNT) ply subjected to a pulsed magnetic field was investigated. In all tests the capacitor bank was charged to 6kJ of energy. A Photon Doppler Velocimetry (PDV) system was used to measure velocity or displacement of the CNT ply during the experiments. The resistance of the CNT ply was measured using four-point probe technique bef…
▽ More
In this study, the possible deformation of a single Carbon Nanotube (CNT) ply subjected to a pulsed magnetic field was investigated. In all tests the capacitor bank was charged to 6kJ of energy. A Photon Doppler Velocimetry (PDV) system was used to measure velocity or displacement of the CNT ply during the experiments. The resistance of the CNT ply was measured using four-point probe technique before and after the experiments. Preliminary results show that the single CNT plies do not permanently deform in response to the pulsed magnetic fields. However, they can be displaced, either by themselves a small amount (0.6mm) or by a large amount using a driver material. Also, the resistance of the CNT plies may increase or decrease depends on the lay-out (i.e., yarn) and current flow directions.
△ Less
Submitted 16 June, 2016; v1 submitted 15 June, 2016;
originally announced June 2016.
-
Testing and Implementation Progress on the Advanced Photon Source (APS) Linear Accelerator (Linac) High-Power S-band Switching System
Authors:
A. E. Grelick,
N. Arnold,
S. Berg,
D. Dohan,
G. Goeppner,
Y. W. Kang,
A. Nassiri,
S. Pasky,
G. Pile,
T. Smith,
S. J. Stein
Abstract:
An S-band linear accelerator is the source of particles and the front end of the Advanced Photon Source injector. In addition, it supports a low-energy undulator test line (LEUTL) and drives a free-electron laser (FEL). A waveguide-switching and distribution system is now under construction. The system configuration was revised to be consistent with the recent change to electron-only operation.…
▽ More
An S-band linear accelerator is the source of particles and the front end of the Advanced Photon Source injector. In addition, it supports a low-energy undulator test line (LEUTL) and drives a free-electron laser (FEL). A waveguide-switching and distribution system is now under construction. The system configuration was revised to be consistent with the recent change to electron-only operation. There are now six modulator-klystron subsystems, two of which are being configured to act as hot spares for two S-band transmitters each, so that no single failure will prevent injector operation. The two subsystems are also used to support additional LEUTL capabilities and off-line testing. Design considerations for the waveguide-switching subsystem, topology selection, control and protection provisions, high-power test results, and current status are described
△ Less
Submitted 18 August, 2000;
originally announced August 2000.
-
RF System Upgrades to the Advanced Photon Source Linear Accelerator in Support of the Fel Operation
Authors:
T. L. Smith,
M. H. Cho,
A. E. Grelick,
G. Pile,
A. Nassiri,
N. Arnold
Abstract:
The S-band linear accelerator, which was built to be the source of particles and the front end of the Advanced Photon Source injector, is now also being used to support a low-energy undulator test line (LEUTL) and to drive a free-electron laser (FEL). The more severe rf stability requirements of the FEL have resulted in an effort to identify sources of phase and amplitude instability and impleme…
▽ More
The S-band linear accelerator, which was built to be the source of particles and the front end of the Advanced Photon Source injector, is now also being used to support a low-energy undulator test line (LEUTL) and to drive a free-electron laser (FEL). The more severe rf stability requirements of the FEL have resulted in an effort to identify sources of phase and amplitude instability and implement corresponding upgrades to the rf generation chain and the measurement system. Test data and improvements implemented and planned are described
△ Less
Submitted 17 August, 2000;
originally announced August 2000.
