-
High-Level Software Tools for LLRF System Dedicated to Elliptical Cavities Management of European Spallation Source Facility
Authors:
K. Klys,
W. Cichalewski,
W. Jalmuzna,
A. Mielczarek,
P. Perek,
A. Napieralski
Abstract:
The European Spallation Source (ESS) accelerator is composed of superconducting elliptical cavities. When the facility is running, the cavities are fed with electrical field from klystrons. Parameters of this field are monitored and controlled by the Low-Level Radio Frequency (LLRF) system. Its main goal is to keep the amplitude and phase at a given set-point. The LLRF system is also responsible f…
▽ More
The European Spallation Source (ESS) accelerator is composed of superconducting elliptical cavities. When the facility is running, the cavities are fed with electrical field from klystrons. Parameters of this field are monitored and controlled by the Low-Level Radio Frequency (LLRF) system. Its main goal is to keep the amplitude and phase at a given set-point. The LLRF system is also responsible for the reference clock distribution.
During machine operation the cavities are periodically experiencing strain caused by the Lorentz force, appearing when the beam is passing through the accelerating structures. Even small changes of the physical dimensions of the cavity cause a shift of its resonance frequency. This phenomenon, called detuning, causes significant power losses. It is actively compensated by the LLRF control system, which can physically tune lengths of the accelerating cavities with stepper motors (slow, coarse grained control) and piezoelements (active compensation during operation state).
The paper describes implementation and tests of the software supporting various aspects of the LLRF system and cavities management. The Piezo Driver management and monitoring tool is dedicated for piezo controller device. The LO Distribution application is responsible for configuration of the local oscillator. The Cavity Simulator tool was designed to provide access to properties of the hardware device, emulating behaviour of elliptical cavities. IPMI Manager software was implemented to monitor state of MicroTCA.4 crates, which are major part of the LLRF system architecture. All applications have been created using the Experimental Physics and Industrial Control System (EPICS) framework and built in ESS EPICS Environment (E3).
△ Less
Submitted 30 October, 2020;
originally announced October 2020.
-
Framework for High-performance Video Acquisition and Processing in MTCA.4 Form Factor
Authors:
Aleksander Mielczarek,
Dariusz Makowski,
Piotr Perek,
Andrzej Napieralski
Abstract:
The video acquisition and processing systems are commonly used in industrial and scientific applications. Many of them utilize Camera Link interface for the transmission of a video stream from the camera to the host system. The framework presented in the paper enables capturing such data, processing it and transmitting to the host CPU. It consist of MTCA.4-compliant frame grabber and a set of soft…
▽ More
The video acquisition and processing systems are commonly used in industrial and scientific applications. Many of them utilize Camera Link interface for the transmission of a video stream from the camera to the host system. The framework presented in the paper enables capturing such data, processing it and transmitting to the host CPU. It consist of MTCA.4-compliant frame grabber and a set of software libraries supporting several different cameras. It is designed for use in large scale physics experiments such as ITER tokamak or European X-Ray Free-Electron Laser (E-XFEL), as well as in the Centre for Free-Electron Laser Science (CFEL). The proposed video acquisition solution features the worlds first Camera Link frame grabber for the MTCA.4 architecture. Thanks to the modern FPGA circuit architecture, the deserialization is done using only the built-in ISERDES primitives, which reduces the costs and complexity of the required hardware.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
Real-time Data Acquisition and Processing System for MHz Repetition Rate Image Sensors
Authors:
Aleksander Mielczarek,
Dariusz Makowski,
Andrzej Napieralski,
Christopher Gerth,
Bernd Steffen
Abstract:
One of the optimization goals of a particle accelerator is to reach the highest possible beam peak current. For that to happen the electron bunch propagating through the accelerator should be kept relatively short along the direction of its travel. In order to obtain a better understanding of the beam composition it is crucial to evaluate the electric charge distribution along the micrometer-scale…
▽ More
One of the optimization goals of a particle accelerator is to reach the highest possible beam peak current. For that to happen the electron bunch propagating through the accelerator should be kept relatively short along the direction of its travel. In order to obtain a better understanding of the beam composition it is crucial to evaluate the electric charge distribution along the micrometer-scale packets. The task of the Electro-Optic Detector (EOD) is to imprint the beam charge profile on the spectrum of light of a laser pulse. The actual measurement of charge distribution is then extracted with a spectrometer based on a diffraction grating.
The article focuses on developed data acquisition and processing system called the High-speed Optical Line Detector (HOLD). It is a 1D image acquisition system which solves several challenges related to capturing, buffering, processing and transmitting large data streams with use of the FPGA device. It implements a latency-optimized custom architecture based on the AXI interfaces. The HOLD device is realized as an FPGA Mezzanine Card (FMC) carrier with single High Pin-Count connector hosting the KIT KALYPSO detector.
The solution presented in the paper is probably one of the world fastest line cameras. Thanks to its custom architecture it is capable of capturing at least 10 times more frames per second than fastest comparable commercially available devices.
△ Less
Submitted 27 June, 2018;
originally announced June 2018.
-
High-power Piezoelectric Tuner Driver for Lorentz Force Compensation
Authors:
Dariusz Makowski,
Aleksander Mielczarek,
Piotr Perek,
Aleksander Szubert,
Pawel Plewinski,
Grzegorz Jablonski,
Wojciech Cichalewski,
Andrzej Napieralski
Abstract:
Superconducting Radio Frequency (SRF) cavities are used in modern accelerators to efficiently accelerate particles. When cavity is supplied with pulsed RF field it undergoes a mechanical strain due to the Lorentz force. The resulting deformation causes dynamic detuning whose amplitude depends on mechanical properties of the cavity, RF pulse rate and their profile. This effect causes considerable l…
▽ More
Superconducting Radio Frequency (SRF) cavities are used in modern accelerators to efficiently accelerate particles. When cavity is supplied with pulsed RF field it undergoes a mechanical strain due to the Lorentz force. The resulting deformation causes dynamic detuning whose amplitude depends on mechanical properties of the cavity, RF pulse rate and their profile. This effect causes considerable loss of acceleration performance. Therefore, it is usually actively compensated, most commonly with fast piezoelectric actuators. MicroTCA.4 standard was developed to accommodate control and data acquisition electronic systems of large-scale physics applications. The paper presents a design of high-power amplifier implemented using the MicroTCA.4 technology. The design of the driver was optimized for driving large-capacitance piezo actuators. Several possible architectures of the driver are presented and compared, taking into consideration the power and cooling limitations of MicroTCA.4. The design of a two-channel piezo driver and its initial laboratory test results are also discussed.
△ Less
Submitted 11 June, 2018;
originally announced June 2018.
-
Application of Structure Functions for the Investigation of Forced Air Cooling
Authors:
M. Janicki,
Jedrzej Banaszczyk,
G. De Mey,
M. Kaminski,
B. Vermeersch,
A. Napieralski
Abstract:
This paper presents thermal analyses of a power amplifier placed in a wind tunnel. All the investigations are based on the transient temperature measurements performed during the circuit cooling process. The measured cooling curves were used to compute the cumulative and differential structure functions for the circuit with a heat sink. These functions helped to determine the optimal values of c…
▽ More
This paper presents thermal analyses of a power amplifier placed in a wind tunnel. All the investigations are based on the transient temperature measurements performed during the circuit cooling process. The measured cooling curves were used to compute the cumulative and differential structure functions for the circuit with a heat sink. These functions helped to determine the optimal values of circuit model parameters necessary for numerical thermal simulations. The experiments demonstrated the influence of the wind speed on the value of the heat transfer coefficient and consequently on the temperature of the entire structure.
△ Less
Submitted 7 January, 2008;
originally announced January 2008.
-
Dynamic Thermal Analysis of a Power Amplifier
Authors:
J. Banaszczyk,
G. De Mey,
M. Janicki,
A. Napieralski,
B. Vermeersch,
P. Kawka
Abstract:
This paper presents dynamic thermal analyses of a power amplifier. All the investigations are based on the transient junction temperature measurements performed during the circuit cooling process. The presented results include the cooling curves, the structure functions, the thermal time constant distribution and the Nyquist plot of the thermal impedance. The experiments carried out demonstrated…
▽ More
This paper presents dynamic thermal analyses of a power amplifier. All the investigations are based on the transient junction temperature measurements performed during the circuit cooling process. The presented results include the cooling curves, the structure functions, the thermal time constant distribution and the Nyquist plot of the thermal impedance. The experiments carried out demonstrated the influence of the contact resistance and the position of the entire cooling assembly on the obtained results.
△ Less
Submitted 12 September, 2007;
originally announced September 2007.