-
Defect engineering over anisotropic brookite towards substrate-specific photo-oxidation of alcohols
Authors:
S. M. Hossein Hejazi,
Mahdi Shahrezaei,
Piotr Błoński,
Mattia Allieta,
Polina M. Sheverdyaeva,
Paolo Moras,
Zdeněk Baďura,
Sergii Kalytchuk,
Elmira Mohammadi,
Radek Zbořil,
Štěpán Kment,
Michal Otyepka,
Alberto Naldoni,
Paolo Fornasiero
Abstract:
Generally adopted design strategies for enhancing the photocatalytic activity are aimed at tuning properties such as the visible light response, the exposed crystal facets, and the nanocrystal shape. Here, we present a different approach for designing efficient photocatalysts displaying a substrate-specific reactivity upon defect engineering. The defective anisotropic brookite TiO2 photocatalyst f…
▽ More
Generally adopted design strategies for enhancing the photocatalytic activity are aimed at tuning properties such as the visible light response, the exposed crystal facets, and the nanocrystal shape. Here, we present a different approach for designing efficient photocatalysts displaying a substrate-specific reactivity upon defect engineering. The defective anisotropic brookite TiO2 photocatalyst functionalized with Pt nanocrystals are tested for alcohol photoreforming showing up to an 11-fold increase in methanol oxidation rate, compared to the unreduced one, whilst presenting much lower ethanol or isopropanol specific oxidation rates. We demonstrate that the alcohol oxidation and hydrogen evolution reactions are tightly related, and when the substrate-specific alcohol oxidation ability is increased, the hydrogen evolution is significantly boosted. The reduced anisotropic brookite shows up to twenty-six-fold higher specific photoactivity with respect to anatase and brookite with isotropic nanocrystals, reflecting the different type of defective catalytic sites formed depending on the TiO2 polymorph and its crystal shape. Advanced in-situ characterizations and theoretical investigations reveal that controlled engineering over oxygen vacancies and lattice strain produces large electron polarons hosting the substrate-specific active sites for alcohol photo-oxidation.
△ Less
Submitted 11 January, 2023;
originally announced January 2023.
-
Well-defined Cu$_2$O photocatalysts for solar fuels and chemicals
Authors:
Sourav Rej,
Matteo Bisetto,
Alberto Naldoni,
Paolo Fornasiero
Abstract:
The shape-controlled synthesis of cuprous oxide (Cu$_2$O) photocatalysts with both low or high index crystal planes has received increasing attention due to their unique facet-dependent properties. Since they are cheap and earth abundant, these well-defined Cu$_2$O nanostructures are extensively used for different photocatalytic reactions, also because of their strong visible light absorption capa…
▽ More
The shape-controlled synthesis of cuprous oxide (Cu$_2$O) photocatalysts with both low or high index crystal planes has received increasing attention due to their unique facet-dependent properties. Since they are cheap and earth abundant, these well-defined Cu$_2$O nanostructures are extensively used for different photocatalytic reactions, also because of their strong visible light absorption capability. However, further development will be still needed to enhance the efficiency and photostability of Cu$_2$O, which still limits its industrial application. We start this review by summarizing the synthetic advancement in the facet engineering of Cu$_2$O and other associated hybrid Cu$_2$O-based heterostructures with a special emphasis put on their growth mechanism. We then discuss different facet-dependent properties, which are relevant to photocatalysis. In the subsequent section, we present a critical discussion on the photocatalytic performance of faceted Cu$_2$O nanostructures during organic synthesis, hydrogen production, and carbon dioxide photoreduction. The relation between photocatalytic efficiency and product selectivity with exposed crystal facets or with different composition of hybrid nanostructures is also discussed. Finally, important strategies are proposed to overcome the photostability issue, while outlining the course of future development to further boost the technological readiness of well-defined Cu$_2$O-based photocatalysts.
△ Less
Submitted 7 December, 2022;
originally announced December 2022.
-
Colloidal Titanium Nitride Nanobars for Broadband Inexpensive Plasmonics and Photochemistry from Visible to Mid-IR Wavelengths
Authors:
Sourav Rej,
Eva Yazmin Santiago,
Olga Baturina,
Yu Zhang,
Sven Burger,
Stepan Kment,
Alexander O. Govorov,
Alberto Naldoni
Abstract:
Develo** colloidal plasmonic nanomaterials with high carrier density that show optical resonances and photochemical activity extending from the visible to the mid-infrared (MIR) ranges remains a challenging pursuit. Here, we report the fabrication of titanium nitride (TiN) nanobars obtained using a two step procedure based on a wet chemical route synthesis of TiO2 nanowires and their subsequent…
▽ More
Develo** colloidal plasmonic nanomaterials with high carrier density that show optical resonances and photochemical activity extending from the visible to the mid-infrared (MIR) ranges remains a challenging pursuit. Here, we report the fabrication of titanium nitride (TiN) nanobars obtained using a two step procedure based on a wet chemical route synthesis of TiO2 nanowires and their subsequent high temperature annealing in ammonia flow. Electromagnetic simulations of the resulting TiN nanobars reveal a rich set of optical resonances featuring transverse, longitudinal and mixed transverse longitudinal plasmonic modes that cover energies from the visible to MIR region. TiN nanobars decorated with Pt co catalyst nanocrystals show enhanced photocatalytic hydrogen evolution activity in comparison to both isotropic TiN nanospheres of similar size and TiN nanocubes under near infrared excitation at 940 nm due to the enhanced hot electron generation. We also demonstrate that plasmonic TiN nanobars can be used for the detection of furfural molecular vibrations by providing a strong surface enhanced infrared absorption (SEIRA) effect in the MIR region.
△ Less
Submitted 10 September, 2022;
originally announced September 2022.
-
Lattice small polarons and magnetic interactions drive preferential nanocrystal growth in silicon doped hematite
Authors:
Mattia Allieta,
Marcello Marelli,
Mauro Coduri,
Mariana Stefan,
Daniela Ghica,
Giorgio Morello,
Francesco Malara,
Alberto Naldoni
Abstract:
Understanding the interplay between the structural, chemical and physical properties of nanomaterials is crucial for designing new devices with enhanced performance. In this regards, do** of metal oxides is a general strategy to tune size, morphology, charge, lattice, orbital and spin degrees of freedoms and has been shown to affect nanomaterials properties for photoelectrochemical water splitti…
▽ More
Understanding the interplay between the structural, chemical and physical properties of nanomaterials is crucial for designing new devices with enhanced performance. In this regards, do** of metal oxides is a general strategy to tune size, morphology, charge, lattice, orbital and spin degrees of freedoms and has been shown to affect nanomaterials properties for photoelectrochemical water splitting, batteries, catalysis, magnetic applications and optics. Here we report the role of lattice small polaron in driving the morphological transition from nearly isotropic to nanowire crystals in Si doped hematite ($α-Fe_2O_3$). Lattice small polaron formation is well evidenced by the increase of hexagonal strain and degree of distortion of $FeO_6$ showing a hyperbolic trend with increasing Si content. Local analysis via pair distribution function highlights an unreported crossover from small to large polarons, which affects the correlation length of the polaronic distortion from short to average scales. Ferromagnetic double exchange interactions between $Fe^{2+}/Fe^{3+}$ species is found to be the driving force of the crossover, constraining the chaining of chemical bonds along the [110] crystallographic direction. This promotes the increase in the reticular density of Fe atoms along the hematite basal plane only, which boosts the anisotropic growth of nanocrystals with more extended [110] facets. Our results show that magnetic and electronic interactions drive preferential crystallographic growth in doped metal oxides, thus providing a new route to design their functional properties.
△ Less
Submitted 9 August, 2019;
originally announced August 2019.
-
Enhancing Hot Carrier Collection for Solar Water Splitting with Plasmonic Titanium Nitride
Authors:
Alberto Naldoni,
Urcan Guler,
Zhuoxian Wang,
Marcello Marelli,
Francesco Malara,
Xiangeng Meng,
Alexander V. Kildishev,
Alexandra Boltasseva,
Vladimir M. Shalaev
Abstract:
The use of hot electrons generated from the decay of surface plasmons is a new paradigm to increase the conversion yield in solar energy technologies. Titanium nitride (TiN) is an emerging plasmonic ceramic that offers compatibility with CMOS technology, corrosion resistance, as well as mechanical strength and durability thus outperforming noble metals (i.e., Au, Ag) in terms of cost, mechanical,…
▽ More
The use of hot electrons generated from the decay of surface plasmons is a new paradigm to increase the conversion yield in solar energy technologies. Titanium nitride (TiN) is an emerging plasmonic ceramic that offers compatibility with CMOS technology, corrosion resistance, as well as mechanical strength and durability thus outperforming noble metals (i.e., Au, Ag) in terms of cost, mechanical, chemical and thermal stability. Here, we show that plasmonic TiN nanoparticles produce 25% higher photocurrent enhancement than Au nanoparticles decorated on TiO2 nanowires for photoelectrochemical water splitting. Our results highlight that TiN offers superior performance in hot carrier generation due to enhanced absorption efficiency, increased electron mean free path, and the ability to form an Ohmic junction with TiO2, thus enabling an extremely efficient electron collection not achievable with plasmonic Au nanoparticles. Our findings show that transition metal nitrides enable practical plasmonic devices with enhanced performance for solar energy conversion.
△ Less
Submitted 22 July, 2016;
originally announced July 2016.
