Showing 1–18 of 18 results for author: Najafi, F

A manufacturable platform for photonic quantum computing

Authors: Koen Alexander, Andrea Bahgat, Avishai Benyamini, Dylan Black, Damien Bonneau, Stanley Burgos, Ben Burridge, Geoff Campbell, Gabriel Catalano, Alex Ceballos, Chia-Ming Chang, CJ Chung, Fariba Danesh, Tom Dauer, Michael Davis, Eric Dudley, ** Er-Xuan, Josep Fargas, Alessandro Farsi, Colleen Fenrich, Jonathan Frazer, Masaya Fukami, Yogeeswaran Ganesan, Gary Gibson, Mercedes Gimeno-Segovia , et al. (70 additional authors not shown)

Abstract: Whilst holding great promise for low noise, ease of operation and networking, useful photonic quantum computing has been precluded by the need for beyond-state-of-the-art components, manufactured by the millions. Here we introduce a manufacturable platform for quantum computing with photons. We benchmark a set of monolithically-integrated silicon photonics-based modules to generate, manipulate, ne… ▽ More Whilst holding great promise for low noise, ease of operation and networking, useful photonic quantum computing has been precluded by the need for beyond-state-of-the-art components, manufactured by the millions. Here we introduce a manufacturable platform for quantum computing with photons. We benchmark a set of monolithically-integrated silicon photonics-based modules to generate, manipulate, network, and detect photonic qubits, demonstrating dual-rail photonic qubits with $99.98\% \pm 0.01\%$ state preparation and measurement fidelity, Hong-Ou-Mandel quantum interference between independent photon sources with $99.50\%\pm0.25\%$ visibility, two-qubit fusion with $99.22\%\pm0.12\%$ fidelity, and a chip-to-chip qubit interconnect with $99.72\%\pm0.04\%$ fidelity, not accounting for loss. In addition, we preview a selection of next generation technologies, demonstrating low-loss silicon nitride waveguides and components, fabrication-tolerant photon sources, high-efficiency photon-number-resolving detectors, low-loss chip-to-fiber coupling, and barium titanate electro-optic phase shifters. △ Less

Submitted 26 April, 2024; originally announced April 2024.

Comments: 8 pages, 5 figures

EPUF: A Novel Scheme Based on Entropy Features of Latency-based DRAM PUFs Providing Lightweight Authentication in IoT Networks

Authors: Fatemeh Najafi, Masoud Kaveh, Mohammad Reza Mosavi, Alessandro Brighente, Mauro Conti

Abstract: Physical unclonable functions (PUFs) are hardware-oriented primitives that exploit manufacturing variations to generate a unique identity for a physical system. Recent advancements showed how DRAM can be exploited to implement PUFs. DRAM PUFs require no additional circuits for PUF operations and can be used in most of the applications with resource-constrained nodes such as Internet of Things (IoT… ▽ More Physical unclonable functions (PUFs) are hardware-oriented primitives that exploit manufacturing variations to generate a unique identity for a physical system. Recent advancements showed how DRAM can be exploited to implement PUFs. DRAM PUFs require no additional circuits for PUF operations and can be used in most of the applications with resource-constrained nodes such as Internet of Things (IoT) networks. However, the existing DRAM PUF solutions either require to interrupt other functions in the host system, or provide unreliable responses due to their sensitiveness to the environmental conditions. In this paper, we propose EPUF, a novel strategy to extract random and unique features from DRAM cells to generate reliable PUF responses. In particular, we use the bitmap images of the binary DRAM values and their entropy features. We show via real device experiments that EPUF is approximately $1.7$ times faster than other state of the art solutions, achieves $100\%$ reliability, generates features with $47.79\%$ uniqueness, and supports a large set of CRP that leads to new potentials for DRAM PUF-based authentication. We also propose a lightweight authentication protocol based on EPUF, which not only provides far better security guarantees but also outperforms the state-of-the-art in terms of communication overhead and computational cost. △ Less

Submitted 19 July, 2023; originally announced July 2023.

Market-Based Coordination of Price-Responsive Demand Using Dantzig-Wolfe Decomposition Method

Authors: Foad Najafi, Matthias Fripp

Abstract: With the increased share of Distributed Generation (DG) and Demand Responsive (DR) loads in the power systems, new approaches based on the game theory framework have been proposed to tackle the problem of coordination of Price Responsive Devices (PRD). The PRDs are modeled as self-benefiting players who try to optimize their consumption based on the price. In this paper, for the first time, a new… ▽ More With the increased share of Distributed Generation (DG) and Demand Responsive (DR) loads in the power systems, new approaches based on the game theory framework have been proposed to tackle the problem of coordination of Price Responsive Devices (PRD). The PRDs are modeled as self-benefiting players who try to optimize their consumption based on the price. In this paper, for the first time, a new algorithm based on the Dantzig-Wolfe (DW) Decomposition method to solve the coordination problem of self-benefiting PRDs in a distributed fashion has been proposed. By utilizing the distributed nature of Dantzig-Wolfe, the PRD's self-benefiting algorithms are modeled as sub-problems of the DW, and the coordinator (or the grid operator) who collects energy consumption of PRDs (their energy bid), solves the master problem of the DW and calculate the price signal accordingly. The proposed algorithm is fast since the subproblem in DW (which could be millions of PRDs) can be solved simultaneously. Furthermore, based on the DW theory, if the PRDs subproblems are convex, reaching the optimal point (Equal to Nash Equilibrium) in limited iterations is guaranteed. A simulation with 8 participant households has been conducted to evaluate the model. Each house is equipped with two types of loads: an Electric Vehicle (EV) as a sample of interruptible loads and an Electric Water Heater (EWH) as a sample of Thermostatically Control Loads (TCA). The results show that when the algorithm reaches the optimal point, the generation cost and the user payment (based on the marginal cost of generation) decrease. Furthermore, the aggregate load's Peak to Average (PAR) reduces significantly. △ Less

Submitted 31 January, 2023; originally announced February 2023.

CP Violation in Rare Lepton-Number-Violating $W$ Decays at the LHC

Authors: Fatemeh Najafi, Jacky Kumar, David London

Abstract: Some models of leptogenesis involve a quasi-degenerate pair of heavy neutrinos $N_{1,2}$ whose masses can be small, $O({\rm GeV})$. Such neutrinos can contribute to the rare lepton-number-violating (LNV) decay $W^\pm \to \ell_1^\pm \ell_2^\pm (q'{\bar q})^\mp$. If both $N_1$ and $N_2$ contribute, there can be a CP-violating rate difference between the LNV decay of a $W^-$ and its CP-conjugate deca… ▽ More Some models of leptogenesis involve a quasi-degenerate pair of heavy neutrinos $N_{1,2}$ whose masses can be small, $O({\rm GeV})$. Such neutrinos can contribute to the rare lepton-number-violating (LNV) decay $W^\pm \to \ell_1^\pm \ell_2^\pm (q'{\bar q})^\mp$. If both $N_1$ and $N_2$ contribute, there can be a CP-violating rate difference between the LNV decay of a $W^-$ and its CP-conjugate decay. In this paper, we examine the prospects for measuring such a CP asymmetry $A_{\rm CP}$ at the LHC. We assume a value for the heavy-light neutrino mixing parameter $|B_{\ell N}|^2 = 10^{-5}$, which is allowed by the present experimental constraints, and consider $5~{\rm GeV} \le M_N \le 80~{\rm GeV}$. We consider three versions of the LHC -- HL-LHC, HE-LHC, FCC-hh -- and show that small values of the CP asymmetry can be measured at $3σ$, in the range $1\% \lesssim A_{\rm CP} \lesssim 15\%$. △ Less

Submitted 22 April, 2021; v1 submitted 6 November, 2020; originally announced November 2020.

Comments: 19 pages, 2 figures, (i) we have made the motivation more generic, so that it refers to any leptogenesis model that contains a quasi-Dirac pair of almost-degenerate neutrinos, not just the nuMSM,(ii) we focus only on the l^- l^- (q' qbar)^+ final state, since it is purely LNV (the trilepton final state has both LNV and LNC contributions). We have also added references and corrected typos."

Report number: UdeM-GPP-TH-20-286

Design and Implementation of a Maxi-Sized Mobile Robot (Karo) for Rescue Missions

Authors: Soheil Habibian, Mehdi Dadvar, Behzad Peykari, Alireza Hosseini, M. Hossein Salehzadeh, Alireza H. M. Hosseini, Farshid Najafi

Abstract: Rescue robots are expected to carry out reconnaissance and dexterity operations in unknown environments comprising unstructured obstacles. Although a wide variety of designs and implementations have been presented within the field of rescue robotics, embedding all mobility, dexterity, and reconnaissance capabilities in a single robot remains a challenging problem. This paper explains the design an… ▽ More Rescue robots are expected to carry out reconnaissance and dexterity operations in unknown environments comprising unstructured obstacles. Although a wide variety of designs and implementations have been presented within the field of rescue robotics, embedding all mobility, dexterity, and reconnaissance capabilities in a single robot remains a challenging problem. This paper explains the design and implementation of Karo, a mobile robot that exhibits a high degree of mobility at the side of maintaining required dexterity and exploration capabilities for urban search and rescue (USAR) missions. We first elicit the system requirements of a standard rescue robot from the frameworks of Rescue Robot League (RRL) of RoboCup and then, propose the conceptual design of Karo by drafting a locomotion and manipulation system. Considering that, this work presents comprehensive design processes along with detail mechanical design of the robot's platform and its 7-DOF manipulator. Further, we present the design and implementation of the command and control system by discussing the robot's power system, sensors, and hardware systems. In conjunction with this, we elucidate the way that Karo's software system and human-robot interface are implemented and employed. Furthermore, we undertake extensive evaluations of Karo's field performance to investigate whether the principal objective of this work has been satisfied. We demonstrate that Karo has effectively accomplished assigned standardized rescue operations by evaluating all aspects of its capabilities in both RRL's test suites and training suites of a fire department. Finally, the comprehensiveness of Karo's capabilities has been verified by drawing quantitative comparisons between Karo's performance and other leading robots participating in RRL. △ Less

Submitted 9 January, 2021; v1 submitted 23 July, 2020; originally announced August 2020.

Journal ref: Robomech J 8, 1 (2021)

CP Violation in Same-sign Dilepton Production at the LHC

Authors: Fatemeh Najafi, Jacky Kumar, David London, Richard MacKenzie

Abstract: If the neutrino is a Majorana particle, low-energy lepton-number-violating (LNV) processes, such as neutrinoless double-beta ($0νββ$) decay, are possible. It may also be possible to observe high-energy $0νββ$-like LNV processes at the LHC. These are distinguished by the presence of same-sign dileptons in the final state (e.g., ${\bar u} d \to t {\bar b} \, e^- μ^-$). In this paper, we show that CP… ▽ More If the neutrino is a Majorana particle, low-energy lepton-number-violating (LNV) processes, such as neutrinoless double-beta ($0νββ$) decay, are possible. It may also be possible to observe high-energy $0νββ$-like LNV processes at the LHC. These are distinguished by the presence of same-sign dileptons in the final state (e.g., ${\bar u} d \to t {\bar b} \, e^- μ^-$). In this paper, we show that CP-violating triple products (TPs) may be present in the process, and may be measurable at the LHC. If a nonzero TP were observed, it would give us much information about the underlying new physics (NP). We would know that there are (at least) two interfering NP amplitudes, with different weak phases and different Lorentz structures. And if we had some knowledge of the NP, e.g., by direct production of NP particles, we could get information about the magnitudes and relative phases of its couplings. △ Less

Submitted 16 July, 2020; v1 submitted 5 February, 2020; originally announced February 2020.

Comments: 8 pages, 1 figure. Important changes to the paper: we now focus on a single NP model, and include a detailed discussion about the prospects for the observation of TPs at the LHC

Report number: UdeM-GPP-TH-20-276

Journal ref: Phys. Rev. D 102, 015025 (2020)

Superconducting-superconducting hybridization for enhancing single-photon detection

Authors: Yachin Ivry, Jonathan J. Surick, Maya Barzilay, Chung-Soo Kim, Faraz Najafi, Estelle Kalfon-Cohen, Andrew D. Dane, Karl K. Berggren

Abstract: The lack of energy dissipation and abrupt electrical phase transition of superconductors favorite them for nanoscale technologies, including radiation detectors, and quantum technologies. Moreover, understanding the nanoscale behavior of superconductivity is significant for revealing the onset of collective-electron behavior in nature. Nevertheless, the limited number of accessible superconductors… ▽ More The lack of energy dissipation and abrupt electrical phase transition of superconductors favorite them for nanoscale technologies, including radiation detectors, and quantum technologies. Moreover, understanding the nanoscale behavior of superconductivity is significant for revealing the onset of collective-electron behavior in nature. Nevertheless, the limited number of accessible superconductors restricts availability of the superconducting properties, encumbering the realization of their potential. Superconducting nanowire single photon detectors (SNSPDs) sense single-IR photons faster and more efficient with respect to competing technologies. However, these advantageous properties are material-dependent causing an undesirable speed-efficiency payoff. Usually, SNSPDs based on granular materials are faster, while those based on amorphous materials are more efficient. Here we optimized ultrathin films of granular NbN on SiO2 and of amorphous W5Si3. We showed that hybrid superconducting nanowire single photon detectors (SNSPDs) made of 2-nm-thick W5Si3 films over 2-nm-thick NbN films exhibit advantageous coexistence of timing (< 5-ns reset time and 52-ps timing jitter) and efficiency (> 96% quantum efficiency) performance. We propose that the governing mechanism of this hybridization is the presence of a dual superconducting behavior: native superconductivity of each of the films and superconductivity that is induced from the neighboring film via the proximity effect. In addition to improvement in SNSPDs performance, our results suggest that such hybridization can expand the range of available superconducting properties, impacting nano-superconducting technologies. Lastly, this hybridization may be used to tune the amorphous character of superconducting films and to illuminate the elusive onset of collective-electron behavior near the superconducting-to-insulating transition. △ Less

Submitted 23 March, 2017; originally announced March 2017.

Ricci cubic gravity in d dimensions, gravitons and SAdS/Lifshitz black holes

Authors: Ahmad Ghodsi, Farzaneh Najafi

Abstract: A special class of higher curvature theories of gravity, Ricci Cubic Gravity (RCG), in general d dimensional space-time has been investigated in this paper. We have used two different approaches, the linearized equations of motion and auxiliary field formalism to study the massive and massless graviton propagating modes of the AdS background. Using the auxiliary field formalism, we have found the… ▽ More A special class of higher curvature theories of gravity, Ricci Cubic Gravity (RCG), in general d dimensional space-time has been investigated in this paper. We have used two different approaches, the linearized equations of motion and auxiliary field formalism to study the massive and massless graviton propagating modes of the AdS background. Using the auxiliary field formalism, we have found the renormalized boundary stress tensor to compute the mass of Schwarzschild AdS and Lifshitz black holes in RCG theory. △ Less

Submitted 3 September, 2017; v1 submitted 22 February, 2017; originally announced February 2017.

Comments: 35 pages. Published version

Free space-coupled superconducting nanowire single photon detectors for infrared optical communications

Authors: Francesco Bellei, Alyssa P. Cartwright, Adam N. McCaughan, Andrew E. Dane, Faraz Najafi, Quinyuan Zhao, Karl K. Berggren

Abstract: This paper describes the construction of a cryostat and an optical system with a free-space coupling efficiency of 56.5% +/- 3.4% to a superconducting nanowire single-photon detector (SNSPD) for infrared quantum communication and spectrum analysis. A 1K pot decreases the base temperature to T = 1.7 K from the 2.9 K reached by the cold head cooled by a pulse-tube cryocooler. The minimum spot size c… ▽ More This paper describes the construction of a cryostat and an optical system with a free-space coupling efficiency of 56.5% +/- 3.4% to a superconducting nanowire single-photon detector (SNSPD) for infrared quantum communication and spectrum analysis. A 1K pot decreases the base temperature to T = 1.7 K from the 2.9 K reached by the cold head cooled by a pulse-tube cryocooler. The minimum spot size coupled to the detector chip was 6.6 +/- 0.11 μm starting from a fiber source at wavelength, λ = 1.55 μm. We demonstrated efficient photon counting on a detector with an 8 x 7.3 μm^2 area. We measured a dark count rate of 95 +/- 3.35 kcps and a system detection efficiency of 1.64% +/- 0.13%. We explain the key steps that are required to further improve the coupling efficiency. △ Less

Submitted 18 November, 2015; originally announced November 2015.

Comments: 16 pages, double-spaced

Eight-fold signal amplification of a superconducting nanowire single-photon detector using a multiple-avalanche architecture

Authors: Qingyuan Zhao, Adam McCaughan, Andrew Dane, Faraz Najafi, Francesco Bellei, Domenico De Fazio, Kristen Sunter, Yachin Ivry, Karl K. Berggren

Abstract: Superconducting nanowire avalanche single-photon detectors (SNAPs) with n parallel nanowires are advantageous over single-nanowire detectors because their output signal amplitude scales linearly with n. However, the SNAP architecture has not been viably demonstrated for n > 4. To increase n for larger signal amplification, we designed a multi-stage, successive-avalanche architecture which used nan… ▽ More Superconducting nanowire avalanche single-photon detectors (SNAPs) with n parallel nanowires are advantageous over single-nanowire detectors because their output signal amplitude scales linearly with n. However, the SNAP architecture has not been viably demonstrated for n > 4. To increase n for larger signal amplification, we designed a multi-stage, successive-avalanche architecture which used nanowires, connected via choke inductors in a binary-tree layout. We demonstrated an avalanche detector with n = 8 parallel nanowires and achieved eight-fold signal amplification, with a timing jitter of 54 ps. △ Less

Submitted 5 August, 2014; originally announced August 2014.

Comments: 7 pages, 3 figures

On-Chip Detection of Entangled Photons by Scalable Integration of Single-Photon Detectors

Authors: Faraz Najafi, Jacob Mower, Nicholas Harris, Francesco Bellei, Andrew Dane, Catherine Lee, Prashanta Kharel, Francesco Marsili, Solomon Assefa, Karl K. Berggren, Dirk Englund

Abstract: Photonic integrated circuits (PICs) have emerged as a scalable platform for complex quantum technologies using photonic and atomic systems. A central goal has been to integrate photon-resolving detectors to reduce optical losses, latency, and wiring complexity associated with off-chip detectors. Superconducting nanowire single-photon detectors (SNSPDs) are particularly attractive because of high d… ▽ More Photonic integrated circuits (PICs) have emerged as a scalable platform for complex quantum technologies using photonic and atomic systems. A central goal has been to integrate photon-resolving detectors to reduce optical losses, latency, and wiring complexity associated with off-chip detectors. Superconducting nanowire single-photon detectors (SNSPDs) are particularly attractive because of high detection efficiency, sub-50-ps timing jitter, nanosecond-scale reset time, and sensitivity from the visible to the mid-infrared spectrum. However, while single SNSPDs have been incorporated into individual waveguides, the system efficiency of multiple SNSPDs in one photonic circuit has been limited below 0.2% due to low device yield. Here we introduce a micrometer-scale flip-chip process that enables scalable integration of SNSPDs on a range of PICs. Ten low-jitter detectors were integrated on one PIC with 100% device yield. With an average system efficiency beyond 10% for multiple SNSPDs on one PIC, we demonstrate high-fidelity on-chip photon correlation measurements of non-classical light. △ Less

Submitted 16 May, 2014; originally announced May 2014.

Comments: 27 pages, manuscript including supporting information

Journal ref: Nature Communications 6, article number 5873 (2015)

Improvement of infrared single-photon detectors absorptance by integrated plasmonic structures

Authors: M. Csete, A. Sipos, A. Szalai, F. Najafi, K. K. Berggren

Abstract: The absorptance of p-polarized light in superconducting-nanowire single-photon detectors (SNSPDs) was improved by integrating (1) ~quarter-wavelength nano-optical cavity closed by a gold reflector (OC-SNSPD), (2) nano-cavity-array closed by vertical and horizontal gold segments (NCAI-SNSPD), and (3) nano-cavity-deflector-array consisting of longer vertical gold segments (NCDAI-SNSPD) into short- (… ▽ More The absorptance of p-polarized light in superconducting-nanowire single-photon detectors (SNSPDs) was improved by integrating (1) ~quarter-wavelength nano-optical cavity closed by a gold reflector (OC-SNSPD), (2) nano-cavity-array closed by vertical and horizontal gold segments (NCAI-SNSPD), and (3) nano-cavity-deflector-array consisting of longer vertical gold segments (NCDAI-SNSPD) into short- (p-) and long- (3p-) periodic niobium-nitride (NbN) stripe-patterns. In OC-SNSPDs the highest absorptance is observable at perpendicular incidence onto NbN stripes in P-orientation due to E-field concentration at the bottom of nano- cavities. In short-periodic NCAI-SNSPDs off-axis illumination results in almost polar-angle-independent perfect absorptance due to collective resonances on plasmonic MIM nano-cavity-arrays in S-orientation. In long-periodic NCAI-SNSPDs the surface wave-excitation phenomena promote EM-field transportation to the NbN stripes in S-orientation and results in local absorptance maxima. In NCDAI-SNSPDs with proper periodicity large absorptance maxima appear due to synchronous E-field enhancement via deflected SPPs below NbN stripes in S-orientation, which make possible fill-factor-related loss compensation. △ Less

Submitted 12 September, 2012; v1 submitted 30 August, 2012; originally announced August 2012.

Comments: 18 pages, 7 figures

Timing performance of 30-nm-wide superconducting nanowire avalanche photodetectors

Authors: F. Najafi, F. Marsili, E. Dauler, R. J. Molnar, K. K. Berggren

Abstract: We investigated the timing jitter of superconducting nanowire avalanche photodetectors (SNAPs, also referred to as cascade switching superconducting single photon detectors) based on 30-nm-wide nanowires. At bias currents (IB) near the switching current, SNAPs showed sub 35 ps FWHM Gaussian jitter similar to standard 100 nm wide superconducting nanowire single-photon detectors. At lower values of… ▽ More We investigated the timing jitter of superconducting nanowire avalanche photodetectors (SNAPs, also referred to as cascade switching superconducting single photon detectors) based on 30-nm-wide nanowires. At bias currents (IB) near the switching current, SNAPs showed sub 35 ps FWHM Gaussian jitter similar to standard 100 nm wide superconducting nanowire single-photon detectors. At lower values of IB, the instrument response function (IRF) of the detectors became wider, more asymmetric, and shifted to longer time delays. We could reproduce the experimentally observed IRF time-shift in simulations based on an electrothermal model, and explain the effect with a simple physical picture. △ Less

Submitted 5 March, 2012; originally announced March 2012.

Afterpulsing and Instability in Superconducting Nanowire Avalanche Photodetectors

Authors: F. Marsili, F. Najafi, E. Dauler, R. J. Molnar, K. K. Berggren

Abstract: We investigated the reset time of superconducting nanowire avalanche photodetectors (SNAPs) based on 30 nm wide nanowires. We studied the dependence of the reset time of SNAPs on the device inductance and discovered that SNAPs can provide a speed-up relative to SNSPDs with the same area, but with some limitations: (1) reducing the series inductance of SNAPs (necessary for the avalanche formation)… ▽ More We investigated the reset time of superconducting nanowire avalanche photodetectors (SNAPs) based on 30 nm wide nanowires. We studied the dependence of the reset time of SNAPs on the device inductance and discovered that SNAPs can provide a speed-up relative to SNSPDs with the same area, but with some limitations: (1) reducing the series inductance of SNAPs (necessary for the avalanche formation) could result in the detectors operating in an unstable regime; (2) a trade-off exists between maximizing the bias current margin and minimizing the reset time of SNAPs; and (3) reducing the reset time of SNAPs below ~ 1 ns resulted in afterpulsing. △ Less

Submitted 29 February, 2012; originally announced March 2012.

Optimized polar-azimuthal orientations for polarized light illumination of different Superconducting Nanowire Single-Photon Detector designs

Authors: Maria Csete, Aron Sipos, Faraz Najafi, Karl K. Berggren

Abstract: The optimal orientations are determined for polarized substrate side illumination of three superconducting nanowire single-photon detector (SNSPD) designs: (1) periodic niobium-nitride (NbN) stripes standing in air with dimensions according to conventional SNSPDs, (2) same NbN patterns below ~quarter-wavelength hydrogensilsesquioxane-filled nano-cavity, (3) analogous NbN patterns in HSQ nano-cavit… ▽ More The optimal orientations are determined for polarized substrate side illumination of three superconducting nanowire single-photon detector (SNSPD) designs: (1) periodic niobium-nitride (NbN) stripes standing in air with dimensions according to conventional SNSPDs, (2) same NbN patterns below ~quarter-wavelength hydrogensilsesquioxane-filled nano-cavity, (3) analogous NbN patterns in HSQ nano-cavity closed by a thin gold reflector. Numerical computation results have shown that the optical response and near-field distribution vary significantly with polar-angle, fi, and these variations are analogous across all azimuthal-angles, gamma, but are fundamentally different in various device designs. Larger absorptance is available due to p-polarized illumination of NbN patterns in P-structure configuration, while s-polarized illumination results in higher absorptance in S-structure arrangement. As a result of p-polarized illumination a global maximum appears on absorptance of bare NbN pattern at polar angle corresponding to NbN-related ATIR; integration with HSQ nano-cavity results in a global absorptance maximum at polar angle corresponding to TIR at sapphire-air interface; while the highest absorptance is observable at perpendicular incidence on P-structures aligned below gold reflector covered HSQ nano-cavity. S-polarized light illumination results in a global absorptance maximum at TIR on bare NbN patterns; the highest absorptance is available below HSQ nano-cavity at polar angle corresponding to ATIR phenomenon; while the benefit of gold reflector is large and polar angle independent absorptance. △ Less

Submitted 13 February, 2012; originally announced February 2012.

Comments: 24 pages, 7 figures

Numerical method to optimize the Polar-Azimuthal Orientation of Infrared Superconducting Nanowire Single-Photon Detectors

Authors: Mária Csete, Áron Sipos, Faraz Najafi, Xiaolong Hu, Karl K. Berggren

Abstract: A novel finite-element method for calculating the illumination-dependence of absorption in three-dimensional nanostructures is presented based on the RF module of the COMSOL software package. This method is capable of numerically determining the optical response and near-field distribution of sub-wavelength periodic structures as a function of illumination orientations specified by polar angle, fi… ▽ More A novel finite-element method for calculating the illumination-dependence of absorption in three-dimensional nanostructures is presented based on the RF module of the COMSOL software package. This method is capable of numerically determining the optical response and near-field distribution of sub-wavelength periodic structures as a function of illumination orientations specified by polar angle, fi, and azimuthal angle, gamma. The method was applied to determine the illumination-angle-dependent absorptance in cavity-based superconducting-nanowire single-photon detector (SNSPD) designs. Niobium-nitride stripes based on dimensions of conventional SNSPDs and integrated with ~ quarter-wavelength hydrogensilsesquioxane-filled nano-optical cavities and covered by a thin gold film acting as a reflector were illuminated from below by p-polarized light in this study. The numerical results were compared to results from complementary transfer-matrix-method calculations on composite layers made of analogous film-stacks. This comparison helped to uncover the optical phenomena contributing to the appearance of extrema in the optical response. This paper presents an approach to optimizing the absorptance of different sensing and detecting devices via simultaneous numerical optimization of the polar and azimuthal illumination angles. △ Less

Submitted 17 June, 2011; originally announced June 2011.

Comments: 15 pages, 4 figures

Single-photon detectors based on ultra-narrow superconducting nanowires

Authors: F. Marsili, F. Najafi, E. Dauler, F. Bellei, X. Hu, M. C. Csete, R. Molnar, K. K. Berggren

Abstract: Superconducting nanowire single-photon detectors (SNSPDs) perform single-photon counting with exceptional sensitivity and time resolution at near-infrared wavelengths. State-of-the-art SNSPDs, based on 100 nm-wide, 4 to 5 nm thick NbN nanowires, are vulnerable to constrictions, which significantly limit their yield. Also, their sensitivity becomes negligible beyond 2 μm wavelength, which makes the… ▽ More Superconducting nanowire single-photon detectors (SNSPDs) perform single-photon counting with exceptional sensitivity and time resolution at near-infrared wavelengths. State-of-the-art SNSPDs, based on 100 nm-wide, 4 to 5 nm thick NbN nanowires, are vulnerable to constrictions, which significantly limit their yield. Also, their sensitivity becomes negligible beyond 2 μm wavelength, which makes them unsuitable for mid-infrared applications. SNSPDs based on few-tens-of-nanometer-wide nanowires are expected to efficiently detect mid-infrared photons and to operate at low bias currents, so constrictions may have less impact on their performance. Prior to this work, SNSPDs based on nanowires narrower than 50-nm had not been demonstrated because: (1) the SNSPD signal is roughly proportional to the nanowire width, so narrow nanowires have poor signal-to-noise ratio; and (2) fabrication at these length scales is extremely challenging. In this letter we report how we addressed these issues and demonstrated single-photon detection (20% detection efficiency at 1550 nm wavelength) with 30- and 20-nm-wide-nanowire detectors. △ Less

Submitted 9 February, 2011; v1 submitted 19 December, 2010; originally announced December 2010.

Comments: This article has been withdrawn to comply to the editorial policy on prior publication of a journal

Electro thermal simulation of superconducting nanowire avalanche photodetectors

Authors: Francesco Marsili, Faraz Najafi, Charles Herder, Karl K. Berggren

Abstract: We developed an electro thermal model of NbN superconducting nanowire avalanche photodetectors (SNAPs) on sapphire substrates. SNAPs are single photon detectors consisting of the parallel connection of N superconducting nanowires. We extrapolated the physical constants of the model from experimental data and we simulated the time evolution of the device resistance, temperature and current by solvi… ▽ More We developed an electro thermal model of NbN superconducting nanowire avalanche photodetectors (SNAPs) on sapphire substrates. SNAPs are single photon detectors consisting of the parallel connection of N superconducting nanowires. We extrapolated the physical constants of the model from experimental data and we simulated the time evolution of the device resistance, temperature and current by solving two coupled electrical and thermal differential equations describing the nanowires. The predictions of the model were in good quantitative agreement with the experimental results. △ Less

Submitted 17 December, 2010; originally announced December 2010.