-
Grain boundary migration in polycrystalline $α$-Fe
Authors:
Zipeng Xu,
Yu-Feng Shen,
S. Kiana Naghibzadeh,
Xiaoyao Peng,
Vivekanand Muralikrishnan,
Siddharth Maddali,
David Menasche,
Amanda R. Krause,
Kaushik Dayal,
Robert M. Suter,
Gregory S. Rohrer
Abstract:
High energy x-ray diffraction microscopy was used to image the microstructure of $α$-Fe before and after a 600 $^\circ$C anneal. These data were used to determine the areas, curvatures, energies, and velocities of approximately 40,000 grain boundaries. The measured grain boundary properties depend on the five macroscopic grain boundary parameters. The velocities are not correlated with the product…
▽ More
High energy x-ray diffraction microscopy was used to image the microstructure of $α$-Fe before and after a 600 $^\circ$C anneal. These data were used to determine the areas, curvatures, energies, and velocities of approximately 40,000 grain boundaries. The measured grain boundary properties depend on the five macroscopic grain boundary parameters. The velocities are not correlated with the product of the mean boundary curvature and grain boundary energy, usually assumed to be the driving force. Boundary migration is made up of area changes (lateral motion) and translation (normal motion) and both contribute to the total migration. Through the lateral motion component of the migration, low energy boundaries tend to expand in area while high energy boundaries shrink, reducing the average energy through grain boundary replacement. The driving force for this process is not related to curvature and might disrupt the expected curvature-velocity relationship.
△ Less
Submitted 18 November, 2023;
originally announced November 2023.
-
Comparison of simulated and measured grain volume changes during grain growth
Authors:
Xiaoyao Peng,
Aditi Bhattacharya,
S. Kiana Naghibzadeh,
David Kinderlehrer,
Robert Suter,
Kaushik Dayal,
Gregory S. Rohrer
Abstract:
The three-dimensional microstructure of Ni, observed after five annealing intervals, was compared to simulations of grain growth using the threshold dynamics method with the assumption of capillarity as the only driving force. A grain-by-grain comparison made it possible to identify the sources of differences between the simulation and experiment. The most significant difference was for grains of…
▽ More
The three-dimensional microstructure of Ni, observed after five annealing intervals, was compared to simulations of grain growth using the threshold dynamics method with the assumption of capillarity as the only driving force. A grain-by-grain comparison made it possible to identify the sources of differences between the simulation and experiment. The most significant difference was for grains of the smallest sizes, which the simulation predicted would lose volume and disappear at a greater rate than observed in the experiment. The loss of grains created errors in the numbers of neighbors of the remaining grains, and it was found that errors in the simulated grain volume were correlated to errors in the number of near neighbors. While anisotropic grain boundary properties likely play a role in the differences, the size dependence of the errors suggest that it might be necessary to include a size dependence in the model for grain boundary migration kinetics.
△ Less
Submitted 14 March, 2022;
originally announced March 2022.
-
Surface Growth in Deformable Solids using an Eulerian Formulation
Authors:
S. Kiana Naghibzadeh,
Noel Walkington,
Kaushik Dayal
Abstract:
Accretion and ablation, i.e. the addition and removal of mass at the surface, is important in a wide range of physical processes including solidification, growth of biological tissues, environmental processes, and additive manufacturing. The description of accretion requires the addition of new continuum particles to the body, and is therefore challenging for standard continuum formulations for so…
▽ More
Accretion and ablation, i.e. the addition and removal of mass at the surface, is important in a wide range of physical processes including solidification, growth of biological tissues, environmental processes, and additive manufacturing. The description of accretion requires the addition of new continuum particles to the body, and is therefore challenging for standard continuum formulations for solids that require a reference configuration. Recent work has proposed an Eulerian approach to this problem, enabling the side-step** of the issue of constructing the reference configuration. However, this raises the complementary challenge of determining the stress response of the solid, which typically requires the deformation gradient that is not immediately available in the Eulerian formulation. To resolve this, the approach introduced the elastic deformation as an additional kinematic descriptor of the added material, and its evolution has been shown to be governed by a transport equation. In this work, the method of characteristics is applied to solve concrete simplified problems motivated by biomechanics and manufacturing. Specifically, (1) for a problem with both ablation and accretion in a fixed domain, and (2) for a problem with a time-varying domain, the closed-form solution is obtained in the Eulerian framework using the method of characteristics without explicit construction of the reference configuration.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
