-
A feasibility study of a thorium fueled molten salt micro modular subcritical reactor using an electron accelerator
Authors:
A. Rummana,
R. Barlow,
G. Myneni,
S. M. Saad
Abstract:
We present a design for a small subcritical molten salt thorium breeder reactor driven by an electron accelerator. Such a reactor could provide a safe and simple power source fuelled by thorium, without generating long-lived minor actinides. We use both Geant4 and MCNPX simulations to study the production of photons and photoneutrons, the criticality and the breeding in a simple conceptual design.…
▽ More
We present a design for a small subcritical molten salt thorium breeder reactor driven by an electron accelerator. Such a reactor could provide a safe and simple power source fuelled by thorium, without generating long-lived minor actinides. We use both Geant4 and MCNPX simulations to study the production of photons and photoneutrons, the criticality and the breeding in a simple conceptual design. We show that the concept is on the edge of viability.
△ Less
Submitted 25 March, 2024; v1 submitted 22 January, 2024;
originally announced January 2024.
-
RF Accelerator Technology R&D: Report of AF7-rf Topical Group to Snowmass 2021
Authors:
Sergey Belomestnykh,
Emilio A. Nanni,
Hans Weise,
Sergey V. Baryshev,
Pashupati Dhakal,
Rongli Geng,
Bianca Giaccone,
Chunguang **g,
Matthias Liepe,
Xueying Lu,
Tianhuan Luo,
Ganapati Myneni,
Alireza Nassiri,
David Neuffer,
Cho-Kuen Ng,
Sam Posen,
Sami Tantawi,
Anne-Marie Valente-Feliciano,
Jean-Luc Vay,
Brandon Weatherford,
Akira Yamamoto
Abstract:
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existi…
▽ More
Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existing facilities, improvements to accelerators already under construction (e.g., PIP-II), well-developed proposals (e.g., ILC, CLIC), and/or enable concepts under development, such as FCC-ee, CEPC, C3, HELEN, multi-MW Fermilab Proton Intensity Upgrade, future Muon Colloder, etc. Advances in RF technology have impact beyond HEP on accelerators built for nuclear physics, basic energy sciences, and other areas. Recent examples of such accelerators are European XFEL, LCLS-II and LCLS-II-HE, SHINE, SNS, ESS, FRIB, and EIC. To support and enable new accelerator-based applications and even make some of them feasible, we must continue addressing their challenges via a comprehensive RF R&D program that would advance the existing RF technologies and explore the nascent ones.
△ Less
Submitted 25 August, 2022;
originally announced August 2022.
-
Medium-Grain Niobium SRF Cavity Production Technology for Science Frontiers and Accelerator Applications
Authors:
G. Myneni,
Hani E. Elsayed-Ali,
Md Obidul Islam,
Md Nizam Sayeed,
G. Ciovati,
P. Dhakal,
R. A. Rimmer,
M. Carl,
A. Fajardo,
N. Lannoy,
B. Khanal,
T. Dohmae,
A. Kumar,
T. Saeki,
K. Umemori,
M. Yamanaka,
S. Michizono,
A. Yamamoto
Abstract:
We propose cost-effective production of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with sub-millimeter average grain size resulting in stable SRF cavity production. We propose to apply this material to particle accelerator applications in the science and indus…
▽ More
We propose cost-effective production of medium grain (MG) niobium (Nb) discs directly sliced from forged and annealed billet. This production method provides clean surface conditions and reliable mechanical characteristics with sub-millimeter average grain size resulting in stable SRF cavity production. We propose to apply this material to particle accelerator applications in the science and industrial frontiers. The science applications require high field gradients (>~40 MV/m) particularly in pulse mode. The industrial applications require high Q0 values with moderate gradients (~30 MV/m) in CW mode operation. This report describes the MG Nb disc production recently demonstrated and discusses future prospects for application in advanced particle accelerators in the science and industrial frontiers.
△ Less
Submitted 11 March, 2022;
originally announced March 2022.
-
Role of Thermal Resistance on the Performance of Superconducting Radio Frequency Cavities
Authors:
Pashupati Dhakal,
Gianluigi Ciovati,
Ganapati Rao Myneni
Abstract:
Thermal stability is an important parameter for the operation of the superconducting radio frequency (SRF) cavities used in particle accelerators. The rf power dissipated on the inner surface of the cavities is conducted to the helium bath cooling the outer cavity surface and the equilibrium temperature of the inner surface depends on the thermal resistance. In this manuscript, we present the resu…
▽ More
Thermal stability is an important parameter for the operation of the superconducting radio frequency (SRF) cavities used in particle accelerators. The rf power dissipated on the inner surface of the cavities is conducted to the helium bath cooling the outer cavity surface and the equilibrium temperature of the inner surface depends on the thermal resistance. In this manuscript, we present the results of direct measurements of thermal resistance on 1.3 GHz single cell SRF cavities made from high purity large grain and fine grain niobium as well as their rf performance for different treatments applied to outer cavity surface in order to investigate the role of the Kapitza resistance to the overall thermal resistance and to the SRF cavity performance. The results show no significant impact of the thermal resistance to the SRF cavity performance after chemical polishing, mechanical polishing or anodization of the outer cavity surface. Temperature maps taken during the rf test show non-uniform heating of the surface at medium rf fields. Calculations of Q0(Bp) curves using the thermal feedback model show good agreement with experimental data at 2 K and 1.8 K when a pair-braking term is included in the calculation of the BCS surface resistance. These results indicate local intrinsic non-linearities of the surface resistance, rather than purely thermal effects, to be the main cause for the observed field dependence of Q0(Bp).
△ Less
Submitted 18 January, 2017;
originally announced January 2017.
-
Experimental Characterization of Magnetic Materials for the Magnetic Shielding of Cryomodules in Particle Accelerators
Authors:
Sanjay Sah,
Ganapati Myneni,
Jayasimha Atulasimha
Abstract:
The magnetic properties of two important passive magnetic shielding materials (A4K and Amumetal) for accelerator applications, subjected to various processing and heat treatment conditions are studied comprehensively over a wide range of temperatures: from Cryogenic to room temperature. We analyze the effect of processing on the extent of degradation of the magnetic properties of both materials an…
▽ More
The magnetic properties of two important passive magnetic shielding materials (A4K and Amumetal) for accelerator applications, subjected to various processing and heat treatment conditions are studied comprehensively over a wide range of temperatures: from Cryogenic to room temperature. We analyze the effect of processing on the extent of degradation of the magnetic properties of both materials and investigate the possibility of restoring these properties by re-annealing.
△ Less
Submitted 28 January, 2015;
originally announced January 2015.
-
Enhancement in Quality Factor of SRF Niobium Cavities by Material Diffusion
Authors:
Pashupati Dhakal,
Gianluigi Ciovati,
Peter Kneisel,
Ganapati Rao Myneni
Abstract:
An increase in the quality factor of superconducting radiofrequency cavities is achieved by minimizing the surface resistance during processing steps. The surface resistance is the sum of temperature independent residual resistance and temperature/material dependent Bardeen-Cooper-Schrieffer (BCS) resistance. High temperature heat treatment usually reduces the impurities concentration from the bul…
▽ More
An increase in the quality factor of superconducting radiofrequency cavities is achieved by minimizing the surface resistance during processing steps. The surface resistance is the sum of temperature independent residual resistance and temperature/material dependent Bardeen-Cooper-Schrieffer (BCS) resistance. High temperature heat treatment usually reduces the impurities concentration from the bulk niobium, lowering the residual resistance. The BCS part can be reduced by selectively do** non-magnetic impurities. The increase in quality factor, termed as Q-rise, was observed in cavities when titanium or nitrogen thermally diffused in the inner cavity surface.
△ Less
Submitted 26 August, 2014;
originally announced August 2014.
-
Analysis of post wet chemistry heat treatment effects on Nb SRF surface resistance
Authors:
Pashupati Dhakal,
Gianluigi Ciovati,
Peter Kneisel,
Ganapati Rao Myneni
Abstract:
Most of the current research in superconducting radio frequency (SRF) cavities is focused on ways to reduce the construction and operating cost of SRF based accelerators as well as on the development of new or improved cavity processing techniques. The increase in quality factors is the result of the reduction of the surface resistance of the materials. A recent test on a 1.5 GHz single cell cavit…
▽ More
Most of the current research in superconducting radio frequency (SRF) cavities is focused on ways to reduce the construction and operating cost of SRF based accelerators as well as on the development of new or improved cavity processing techniques. The increase in quality factors is the result of the reduction of the surface resistance of the materials. A recent test on a 1.5 GHz single cell cavity made from ingot niobium of medium purity and heat treated at 1400 C in a ultra-high vacuum induction furnace resulted in a residual resistance of about 1nanoohm and a quality factor at 2.0 K increasing with field up to 5x10^10 at a peak magnetic field of 90 mT. In this contribution, we present some results on the investigation of the origin of the extended Q0-increase, obtained by multiple HF rinses, oxypolishing and heat treatment of all Nb cavities.
△ Less
Submitted 30 October, 2013;
originally announced October 2013.
-
The Rise of Ingot Niobium as a Material for Superconducting Radiofrequency Accelerating Cavities
Authors:
P. Kneisel,
G. Ciovati,
P. Dhakal,
K. Saito,
W. Singer,
X. Singer,
G. R. Myneni
Abstract:
As a result of a collaboration between Jefferson Lab and niobium manufacturer CBMM, ingot niobium was explored as a possible material for superconducting radiofrequency (SRF) cavity fabrication. The first single cell cavity from large grain high purity niobium was fabricated and successfully tested at Jefferson Lab in 2004. This pioneering work triggered research activities in other SRF laboratori…
▽ More
As a result of a collaboration between Jefferson Lab and niobium manufacturer CBMM, ingot niobium was explored as a possible material for superconducting radiofrequency (SRF) cavity fabrication. The first single cell cavity from large grain high purity niobium was fabricated and successfully tested at Jefferson Lab in 2004. This pioneering work triggered research activities in other SRF laboratories around the world. Large grain niobium became not only an interesting alternative material for cavity builders, but also material scientists and surface scientists were eager to participate in the development of this material. Most of the original expectations for this material of being less costly and allowing less expensive fabrication and treatment procedures at the same performance levels in cavities have been met. Many single cell cavities made from material of different suppliers have been tested successfully and several multi-cell cavities have shown the performances comparable to the best cavities made from standard poly-crystalline niobium. Several 9-cell cavities fabricated by Research Instruments and tested at DESY exceeded the best performing fine grain cavities with a record accelerating gradient of Eacc = 45.6 MV/m. Recently- at JLab- by using a new furnace treatment procedure a single cell cavity made of ingot niobium performed at a remarkably high Q0-value (~5x10^10) at an accelerating gradient of ~20 MV/m, at 2K. Such performance levels push the state-of-the art of SRF technology to new limits and are of great interest for future accelerators. This contribution reviews the development of ingot niobium technology and attempts to make a case for this material being the choice for future accelerators.
△ Less
Submitted 5 April, 2013;
originally announced April 2013.
-
Comment on "Proximity breakdown of hydrides in superconducting niobium cavities" [arXiv:1212.3384]
Authors:
G. Ciovati,
P. Dhakal,
G. R. Myneni
Abstract:
Comment on Proximity breakdown of hydrides in superconducting niobium cavities [arXiv:1212.3384].
Comment on Proximity breakdown of hydrides in superconducting niobium cavities [arXiv:1212.3384].
△ Less
Submitted 9 June, 2013; v1 submitted 18 January, 2013;
originally announced January 2013.
-
Effect of high temperature heat treatments on the quality factor of a large-grain superconducting radio-frequency niobium cavity
Authors:
P. Dhakal,
G. Ciovati,
G. R. Myneni,
K. E. Gray,
N. Groll,
P. Maheshwari,
D. M. McRae,
R. Pike,
T. Proslier,
F. Stevie,
R. P. Walsh,
Q. Yang,
J. Zasadzinzki
Abstract:
Large-grain Nb has become a viable alternative to fine-grain Nb for the fabrication of superconducting radio-frequency cavities. In this contribution we report the results from a heat treatment study of a large-grain 1.5 GHz single-cell cavity made of "medium purity" Nb. The baseline surface preparation prior to heat treatment consisted of standard buffered chemical polishing. The heat treatment i…
▽ More
Large-grain Nb has become a viable alternative to fine-grain Nb for the fabrication of superconducting radio-frequency cavities. In this contribution we report the results from a heat treatment study of a large-grain 1.5 GHz single-cell cavity made of "medium purity" Nb. The baseline surface preparation prior to heat treatment consisted of standard buffered chemical polishing. The heat treatment in the range 800 - 1400 C was done in a newly designed vacuum induction furnace. Q0 values of the order of 2x1010 at 2.0 K and peak surface magnetic field (Bp) of 90 mT were achieved reproducibly. A Q0-value of (5+-1)1010 at 2.0 K and Bp = 90 mT was obtained after heat treatment at 1400 C. This is the highest value ever reported at this temperature, frequency and field. Samples heat treated with the cavity at 1400 C were analyzed by secondary ion mass spectrometry, secondary electron microscopy, energy dispersive X-ray, point contact tunneling and X-ray diffraction and revealed a complex surface composition which includes titanium oxide, increased carbon and nitrogen content but reduced hydrogen concentration compared to a non heat-treated sample.
△ Less
Submitted 25 March, 2013; v1 submitted 25 October, 2012;
originally announced October 2012.
-
A Path to Higher Q0 with Large Grain Niobium Cavities
Authors:
Pashupati Dhakal,
Gianluigi Ciovati,
Ganapati Rao Myneni
Abstract:
The improvement of the quality factor Q0 of superconducting radio-frequency (SRF) cavities at medium accelerating gradients (20-25 MV/m) is important in order to reduce the cryogenic losses in continuous wave (CW) accelerators used for a variety of applications. In recent years, SRF cavities fabricated from ingot niobium have become a viable alternative to standard high-purity fine-grain Nb for th…
▽ More
The improvement of the quality factor Q0 of superconducting radio-frequency (SRF) cavities at medium accelerating gradients (20-25 MV/m) is important in order to reduce the cryogenic losses in continuous wave (CW) accelerators used for a variety of applications. In recent years, SRF cavities fabricated from ingot niobium have become a viable alternative to standard high-purity fine-grain Nb for the fabrication of high-performing SRF cavities with the possibility of significant cost reduction. Recent studies demonstrated the improvement of Q0 at medium field in cavities heat treated at 800-1200 °C without subsequent chemical etching [ ]. To further explore this treatment procedure, a new induction furnace with an all-niobium hot-zone was commissioned [ ]. A single-cell 1.5 GHz cavity fabricated from ingot material from CBMM, Brazil, with RRR 200, was heat treated in the new furnace in the temperature range 800-1400 °C for several hours. Residual resistance value of 1 - 5 nΩhave been consistently achieved on this cavity Q0-values as high as 4.6\times1010 at 90 mT peak surface magnetic field at 2 K. Q0 values of about ~2\times1011 have been measured at 1.5 K.
△ Less
Submitted 30 May, 2012;
originally announced May 2012.
-
Superconducting DC and RF Properties of Ingot Niobium
Authors:
Pashupati Dhakal,
Gianluigi Ciovati,
Peter Kneisel,
Ganapati Rao Myneni
Abstract:
The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the influence of chemical and heat-treatment processes on the superconducting properties, with no significant dependence on the impurity concentrations in the original…
▽ More
The thermal conductivity, DC magnetization and penetration depth of large-grain niobium hollow cylindrical rods fabricated from ingots, manufactured by CBMM subjected to chemical and heat treatment were measured. The results confirm the influence of chemical and heat-treatment processes on the superconducting properties, with no significant dependence on the impurity concentrations in the original ingots. Furthermore, RF properties, such as the surface resistance and quench field of the niobium rods were measured using a TE011 cavity. The hollow niobium rod is the center conductor of this cavity, converting it to a coaxial cavity. The quench field is limited by the critical heat flux through the rods' cooling channel.
△ Less
Submitted 3 February, 2012;
originally announced February 2012.