-
Vector-based feedback of continuous wave radiofrequency compression cavity for ultrafast electron diffraction
Authors:
Thomas Sutter,
Joshua Lee,
Atharva Kulkarni,
Pietro Musumeci,
Anshul Kogar
Abstract:
The temporal resolution of ultrafast electron diffraction (UED) at weakly relativistic beam energies ($\lesssim$ 100 keV) suffers from space-charge induced electron pulse broadening. We describe the implementation of a radio frequency (RF) cavity operating in the continuous wave regime to compress high repetition rate electron bunches from a 40.4 kV DC photoinjector for ultrafast electron diffract…
▽ More
The temporal resolution of ultrafast electron diffraction (UED) at weakly relativistic beam energies ($\lesssim$ 100 keV) suffers from space-charge induced electron pulse broadening. We describe the implementation of a radio frequency (RF) cavity operating in the continuous wave regime to compress high repetition rate electron bunches from a 40.4 kV DC photoinjector for ultrafast electron diffraction applications. Active stabilization of the RF amplitude and phase through a feedback loop based on the demodulated in-phase and quadrature components of the RF signal is demonstrated. This scheme yields 144$\pm$19 fs RMS temporal resolution in pump-probe studies.
△ Less
Submitted 7 March, 2024; v1 submitted 27 November, 2023;
originally announced November 2023.
-
Extended Interaction Length Laser-Driven Acceleration in a Tunable Dielectric Structure
Authors:
Sophie Crisp,
Alexander Ody,
Joel England,
Pietro Musumeci
Abstract:
The development of long, tunable structures is critical to increasing energy gain in laser-driven dielectric accelerators (DLAs). Here we combine pulse-front-tilt illumination with slab-geometry structures assembled by precisely aligning off-the-shelf 4~mm long transmission gratings to achieve up to 200 keV energy modulation for 6 MeV injected electrons. The effective interaction length is longer…
▽ More
The development of long, tunable structures is critical to increasing energy gain in laser-driven dielectric accelerators (DLAs). Here we combine pulse-front-tilt illumination with slab-geometry structures assembled by precisely aligning off-the-shelf 4~mm long transmission gratings to achieve up to 200 keV energy modulation for 6 MeV injected electrons. The effective interaction length is longer than 1~mm, limited by dephasing of the accelerated particles in the structure. The piezo-based independent mounting system for the gratings allows tuning of the gap and field distribution inside the structure.
△ Less
Submitted 20 October, 2023; v1 submitted 18 October, 2023;
originally announced October 2023.
-
Relativistic ultrafast electron diffraction at high repetition rates
Authors:
K. M. Siddiqui,
D. B. Durham,
F. Cropp,
F. Ji,
S. Paiagua,
C. Ophus,
N. C. Andresen,
L. **,
J. Wu,
S. Wang,
X. Zhang,
W. You,
M. Murnane,
M. Centurion,
X. Wang,
D. S. Slaughter,
R. A. Kaindl,
P. Musumeci,
A. M. Minor,
D. Filippetto
Abstract:
The ability to resolve the dynamics of matter on its native temporal and spatial scales constitutes a key challenge and convergent theme across chemistry, biology, and materials science. The last couple of decades have witnessed ultrafast electron diffraction (UED) emerge as one of the forefront techniques with the sensitivity to resolve atomic motions. Increasingly sophisticated UED instruments a…
▽ More
The ability to resolve the dynamics of matter on its native temporal and spatial scales constitutes a key challenge and convergent theme across chemistry, biology, and materials science. The last couple of decades have witnessed ultrafast electron diffraction (UED) emerge as one of the forefront techniques with the sensitivity to resolve atomic motions. Increasingly sophisticated UED instruments are being developed that are aimed at increasing the beam brightness in order to observe structural signatures, but so far they have been limited to low average current beams. Here we present the technical design and capabilities of the HiRES (High Repetition Rate Electron Scattering) instrument, which blends relativistic electrons and high repetition rates to achieve orders of magnitude improvement in average beam current compared to the existing state-of-the-art UED instruments. The setup utilizes a novel electron source to deliver femtosecond duration electron pulses at up to MHz repetition rates for UED experiments. We provide example cases of diffraction measurements on solid-state and gas-phase samples, including both micro- and nanodiffraction modes, which showcase the potential of the instrument for novel UED experiments.
△ Less
Submitted 7 June, 2023;
originally announced June 2023.
-
Virtual-Diagnostic-Based Time Stam** for Ultrafast Electron Diffraction
Authors:
Frederick Cropp,
Lauren Moos,
Alexander Scheinker,
Antonio Gilardi,
Dan Wang,
Sergio Paiagua,
Carlos Serrano,
Pietro Musumeci,
Daniele Filippetto
Abstract:
In this work, non-destructive virtual diagnostics are applied to retrieve the electron beam time of arrival and energy in a relativistic ultrafast electron diffraction (UED) beamline using independently-measured machine parameters. This technique has the potential to improve temporal resolution of pump and probe UED scans. Fluctuations in time of arrival have multiple components, including a shot-…
▽ More
In this work, non-destructive virtual diagnostics are applied to retrieve the electron beam time of arrival and energy in a relativistic ultrafast electron diffraction (UED) beamline using independently-measured machine parameters. This technique has the potential to improve temporal resolution of pump and probe UED scans. Fluctuations in time of arrival have multiple components, including a shot-to-shot jitter and a long-term drift which can be separately addressed by closed loop feedback systems. A linear-regression-based model is used to fit the beam energy and time of arrival and is shown to be able to predict accurately behavior for both on long and short time scales. More advanced time-series analysis based on machine learning techniques can be applied to improve this prediction further.
△ Less
Submitted 9 February, 2023;
originally announced February 2023.
-
Snowmass'21 Accelerator Frontier Report
Authors:
S. Gourlay,
T. Raubenheimer,
V. Shiltsev,
G. Arduini,
R. Assmann,
C. Barbier,
M. Bai,
S. Belomestnykh,
S. Bermudez,
P. Bhat,
A. Faus-Golfe,
J. Galambos,
C. Geddes,
G. Hoffstaetter,
M. Hogan,
Z. Huang,
M. Lamont,
D. Li,
S. Lund,
R. Milner,
P. Musumeci,
E. Nanni,
M. Palmer,
N. Pastrone,
F. Pellemoine
, et al. (13 additional authors not shown)
Abstract:
In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these…
▽ More
In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these activities are summarized in this Accelerator Frontier report.
△ Less
Submitted 17 November, 2022; v1 submitted 28 September, 2022;
originally announced September 2022.
-
Report of Snowmass 21 Accelerator Frontier Topical Group 6 on Advanced Accelerators
Authors:
C. Geddes,
M. Hogan,
P. Musumeci,
R. Assmann
Abstract:
The Snowmass 2021 Accelerator Frontier topical group \# 6 on Advanced Accelerator Concepts, covers new R\&D concepts for particle acceleration, generation, and focusing. Based on community input, this report describes how leveraging these concepts to efficiently harness the interaction of charged particles with extremely high electromagnetic fields at very high frequencies can provide the keys to…
▽ More
The Snowmass 2021 Accelerator Frontier topical group \# 6 on Advanced Accelerator Concepts, covers new R\&D concepts for particle acceleration, generation, and focusing. Based on community input, this report describes how leveraging these concepts to efficiently harness the interaction of charged particles with extremely high electromagnetic fields at very high frequencies can provide the keys to reaching ultra high acceleration gradients (GeV/m and beyond). These methods have potential to reduce the dimensions, C0$_2$ footprint, and costs of future high energy physics machines, with added potential to reduce power consumption for future e+e- and $γ- γ$ machines to and beyond 15 TeV energies. Techniques range from laser and beam driven plasma and advanced structure accelerators to advanced phase space manipulations and generation of beams with extreme parameters.
△ Less
Submitted 24 September, 2022; v1 submitted 28 August, 2022;
originally announced August 2022.
-
Ultrafast Electron Diffraction: Visualizing Dynamic States of Matter
Authors:
Daniele Filippetto,
Pietro Musumeci,
Renkai Li,
Bradley John Siwick,
Martin Otto,
Martin Centurion Joao Pedro Nunes
Abstract:
Since the discovery of electron-wave duality, electron scattering instrumentation has developed into a powerful array of techniques for revealing the atomic structure of matter. Beyond detecting local lattice variations in equilibrium structures, recent research efforts have been directed towards the long sought-after dream of visualizing the dynamic evolution of matter in real-time. The atomic be…
▽ More
Since the discovery of electron-wave duality, electron scattering instrumentation has developed into a powerful array of techniques for revealing the atomic structure of matter. Beyond detecting local lattice variations in equilibrium structures, recent research efforts have been directed towards the long sought-after dream of visualizing the dynamic evolution of matter in real-time. The atomic behavior at ultrafast timescales carries critical information on phase transition and chemical reaction dynamics, the coupling of electronic and nuclear degrees of freedom in materials and molecules, the correlation between structure, function and previously hidden metastable or nonequilibrium states of matter. Ultrafast electron pulses play an essential role in this scientific endeavor, and their generation has been facilitated by rapid technical advances in both ultrafast laser and particle accelerator technologies. This review presents a summary of the remarkable developments in this field over the last few decades. The physics and technology of ultrafast electron beams is presented with an emphasis on the figures of merit most relevant for ultrafast electron diffraction (UED) experiments. We discuss recent developments in the generation, manipulation and characterization of ultrashort electron beams aimed at improving the combined spatio-temporal resolution of these measurements. The fundamentals of electron scattering from atomic matter and the theoretical frameworks for retrieving dynamic structural information from solid-state and gas-phase samples are described, together with essential experimental techniques and several landmark works. Ultrafast electron probes with ever improving capabilities, combined with other complementary photon-based or spectroscopic approaches, hold tremendous potential for revolutionizing our ability to observe and understand energy and matter at atomic scales.
△ Less
Submitted 30 June, 2022;
originally announced July 2022.
-
Electro-optic sampling based characterization of broad-band high efficiency THz-FEL
Authors:
Maximilian Lenz,
Andrew Fisher,
Youna Park,
Alexander Ody,
Pietro Musumeci
Abstract:
Extremely high beam-to-radiation energy conversion efficiencies can be obtained in a THz FEL using a strongly tapered helical undulator at the zero-slippage resonant condition, where a circular waveguide is used to match the radiation group velocity to the electron beam longitudinal velocity. In this paper we report on the first electro-optic sampling (EOS) based measurements of the broadband THz…
▽ More
Extremely high beam-to-radiation energy conversion efficiencies can be obtained in a THz FEL using a strongly tapered helical undulator at the zero-slippage resonant condition, where a circular waveguide is used to match the radiation group velocity to the electron beam longitudinal velocity. In this paper we report on the first electro-optic sampling (EOS) based measurements of the broadband THz FEL radiation pulses emitted in this regime. The THz field waveforms are reconstructed in the spatial and temporal domains using multi-shot and single-shot EOS schemes respectively. The measurements are performed varying the input electron beam energy in the undulator providing insights on the complex dynamics in a waveguide FEL.
△ Less
Submitted 27 June, 2022;
originally announced June 2022.
-
Positron Sources for Future High Energy Physics Colliders
Authors:
P. Musumeci,
C. Boffo,
S. S. Bulanov,
I. Chaikovska,
A. Faus Golfe,
S. Gessner,
J. Grames,
R. Hessami,
Y. Ivanyushenkov,
A. Lankford,
G. Loisch,
G. Moortgat-Pick,
S. Nagaitsev,
S. Riemann,
P. Sievers,
C. Tenholt,
K. Yokoya
Abstract:
An unprecedented positron average current is required to fit the luminosity demands of future $e^+e^-$ high energy physics colliders. In addition, in order to access precision-frontier physics, these machines require positron polarization to enable exploring the polarization dependence in many HEP processes cross sections, reducing backgrounds and extending the reach of chiral physics studies beyo…
▽ More
An unprecedented positron average current is required to fit the luminosity demands of future $e^+e^-$ high energy physics colliders. In addition, in order to access precision-frontier physics, these machines require positron polarization to enable exploring the polarization dependence in many HEP processes cross sections, reducing backgrounds and extending the reach of chiral physics studies beyond the standard model. The ILC has a mature plan for the polarized positron source based on conversion in a thin target of circularly polarized gammas generated by passing the main high energy e-beam in a long superconducting helical undulator. Compact colliders (CLIC, C3 and advanced accelerator-based concepts) adopt a simplified approach and currently do not plan to use polarized positrons in their baseline design, but could greatly benefit from the development of compact alternative solutions to polarized positron production. Increasing the positron current, the polarization purity and simplifying the engineering design are all opportunities where advances in accelerator technology have the potential to make a significant impact. This white-paper describes the current status of the field and provides R\&D short-term and long-term pathways for polarized positron sources.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
Feedback and control systems for future linear colliders: White Paper for Snowmass 2021 Topical Group AF07-RF
Authors:
Daniele Filippetto,
Carlos Serrano,
Qiang Du,
Lawrence Doolittle,
Dan Wang,
Michalis Bachtis,
Pietro Musumeci,
Alexander Scheinker,
John Power,
Marco Bellaveglia,
Alessandro Gallo,
Luca Piersanti
Abstract:
Particle accelerators for high energy physics will generate TeV-scale particle beams in large, multi-Km size machines colliding high brightness beams at the interaction point [1-4]. The high luminosity in such machines is achieved by producing very small asymmetric beam size at the interaction point, with short durations to minimize beam-beam effects. Tuning energy, timing and position of the beam…
▽ More
Particle accelerators for high energy physics will generate TeV-scale particle beams in large, multi-Km size machines colliding high brightness beams at the interaction point [1-4]. The high luminosity in such machines is achieved by producing very small asymmetric beam size at the interaction point, with short durations to minimize beam-beam effects. Tuning energy, timing and position of the beam for optimal performance will require high-precision controls of amplitude and phase of high-frequency electromagnetic fields and real-time processing of complex algorithms. The stability of the colliding beams has a large impact on the collider's effective luminosity. Therefore, the technology readiness level of diagnostic and control systems will be a major consideration in the collider design. The technical requirements of such systems depend on the specifics of beam parameters, such as transverse and longitudinal dimensions, charge/pulse and beam pulse format, which are driven by the accelerating technology of choice. While feedback systems with single bunch position monitor resolution below 50 nm and latency <300 ns have been demonstrated in beam test facilities, many advanced collider concepts make use of higher repetition rates, brighter beams and higher accelerating frequencies, and will require better performance, up to 1-2 order of magnitude, demanding aggressive R&D to be able to deliver and maintain the targeted luminosity.
△ Less
Submitted 6 April, 2022; v1 submitted 1 April, 2022;
originally announced April 2022.
-
C$^3$ Demonstration Research and Development Plan
Authors:
Emilio A. Nanni,
Martin Breidenbach,
Caterina Vernieri,
Sergey Belomestnykh,
Pushpalatha Bhat,
Sergei Nagaitsev,
Mei Bai,
William Berg,
Tim Barklow,
John Byrd,
Ankur Dhar,
Ram C. Dhuley,
Chris Doss,
Joseph Duris,
Auralee Edelen,
Claudio Emma,
Josef Frisch,
Annika Gabriel,
Spencer Gessner,
Carsten Hast,
Chunguang **g,
Arkadiy Klebaner,
Anatoly K. Krasnykh,
John Lewellen,
Matthias Liepe
, et al. (25 additional authors not shown)
Abstract:
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced stat…
▽ More
C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, dam** ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.
△ Less
Submitted 6 July, 2022; v1 submitted 17 March, 2022;
originally announced March 2022.
-
Laser-Driven Structure-Based Accelerators
Authors:
R. J. England,
D. Filippetto,
G. Torrisi,
A. Bacci,
G. Della Valle,
D. Mascali,
G. S. Mauro,
G. Sorbello,
P. Musumeci,
J. Scheuer,
B. Cowan,
L Schachter,
Y-C. Huang,
U. Niedermayer,
W. D. Kimura,
R. Li,
R. Ishebeck,
E. I. Simakov,
P. Hommelhoff,
R. L. Byer
Abstract:
Particle acceleration in microstructures driven by ultrafast solid state lasers is a rapidly evolving area of advanced accelerator research, leading to a variety of concepts based on planar-symmetric dielectric gratings, hollow core fibers, photonic crystals, and plasmonic meta-surfaces. This approach leverages well-established industrial fabrication capabilities and the commercial availability of…
▽ More
Particle acceleration in microstructures driven by ultrafast solid state lasers is a rapidly evolving area of advanced accelerator research, leading to a variety of concepts based on planar-symmetric dielectric gratings, hollow core fibers, photonic crystals, and plasmonic meta-surfaces. This approach leverages well-established industrial fabrication capabilities and the commercial availability of tabletop lasers to reduce cost, with demonstrated axial accelerating fields in the GV/m range. Wide-ranging international efforts have significantly improved understanding of gradient limits, structure design, particle focusing and transport, staging, and development of compatible low-emittance electron sources. With a near-term focus on low-current MeV-scale applications for compact scientific and medical instruments, as well as novel diagnostics capabilities, structure-based laser-driven accelerators have several key benefits that warrant consideration for future high-energy physics machines, including low beamstrahlung energy loss, modest power requirements, stability, and readiness of supporting technologies.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Whitepaper submitted to Snowmass21: Advanced accelerator linear collider demonstration facility at intermediate energy
Authors:
C. Benedetti,
S. S. Bulanov,
E. Esarey,
C. G. R. Geddes A. J. Gonsalves,
P. M. Jacobs,
S. Knapen,
B. Nachman,
K. Nakamura,
S. Pagan Griso,
C. B. Schroeder,
D. Terzani,
J. van Tilborg,
M. Turner,
W. -M. Yao,
R. Bernstein,
V. Shiltsev,
S. J. Gessner,
M. J. Hogan,
T. Nelson,
C. **g,
I. Low,
X. Lu,
R. Yoshida,
C. Lee,
P. Meade
, et al. (8 additional authors not shown)
Abstract:
It is widely accepted that the next lepton collider beyond a Higgs factory would require center-of-mass energy of the order of up to 15 TeV. Since, given reasonable space and cost restrictions, conventional accelerator technology reaches its limits near this energy, high-gradient advanced acceleration concepts are attractive. Advanced and novel accelerators (ANAs) are leading candidates due to the…
▽ More
It is widely accepted that the next lepton collider beyond a Higgs factory would require center-of-mass energy of the order of up to 15 TeV. Since, given reasonable space and cost restrictions, conventional accelerator technology reaches its limits near this energy, high-gradient advanced acceleration concepts are attractive. Advanced and novel accelerators (ANAs) are leading candidates due to their ability to produce acceleration gradients on the order of 1--100~GV/m, leading to compact acceleration structures. Over the last 10-15 years significant progress has been achieved in accelerating electron beams by ANAs. For example, the demonstration of several-GeV electron beams from laser-powered capillary discharge waveguides, as well as the proof-of-principle coupling of two accelerating structures powered by different laser pulses, has increased interest in ANAs as a viable technology to be considered for a compact, TeV-class, lepton linear collider.
However, intermediate facilities are required to test the technology and demonstrate key subsystems. A 20-100 GeV center-of-mass energy ANA-based lepton collider can be a possible candidate for an intermediate facility. Apart from being a test beam facility for accelerator and detector studies, this collider will provide opportunities to study muon and proton beam acceleration, investigate charged particle interactions with extreme electromagnetic fields (relevant for beam delivery system designs and to study the physics at the interaction point), as well as precision Quantum Chromodynamics and Beyond the Standard Model physics measurements. Possible applications of this collider include the studies of $γγ$ and $e$-ion collider designs.
△ Less
Submitted 15 April, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Considerations for a TeV Collider Based On Dielectric Laser Accelerators
Authors:
R. J. England,
U. Niedermayer,
L. Schachter,
T. Hughes,
P. Musumeci,
R. K. Li,
W. D. Kimura
Abstract:
Particle acceleration in dielectric microstructures powered by infrared lasers, or "dielectric laser acceleration" (DLA), is a promising area of advanced accelerator research with the potential to enable more affordable and higher-gradient accelerators for energy frontier science and a variety of other applications. DLA leverages well-established industrial fabrication capabilities and the commerc…
▽ More
Particle acceleration in dielectric microstructures powered by infrared lasers, or "dielectric laser acceleration" (DLA), is a promising area of advanced accelerator research with the potential to enable more affordable and higher-gradient accelerators for energy frontier science and a variety of other applications. DLA leverages well-established industrial fabrication capabilities and the commercial availability of tabletop lasers to reduce cost, with axial accelerating fields in the GV/m range. Desirable luminosities would be obtained by operating with very low charge per bunch but at extremely high repetition rates. And as a consequence of its unique operating parameter regime, coupling of the laser to the accelerator can potentially be in the 50\% range and with low beamstrahlung energy loss due at the interaction point, making DLA a promising approach for a future multi-TeV linear collider.
△ Less
Submitted 7 March, 2022;
originally announced March 2022.
-
Positron sources: from conventional to advanced accelerator concepts-based colliders
Authors:
I. Chaikovska,
R. Chehab,
V. Kubytskyi,
S. Ogur,
A. Ushakov,
A. Variola,
P. Sievers,
P. Musumeci,
L. Bandiera,
Y. Enomoto,
Mark J. Hogan,
P. Martyshkin
Abstract:
Positron sources are the key elements for the future and current lepton collider projects such as ILC, CLIC, SuperKEKB, FCC-ee, Muon Collider/LEMMA, etc., introducing challenging critical requirements for high intensity and low emittance beams in order to achieve high luminosity. In fact, due to their large production emittance and constraints given by the target thermal load, the main collider pa…
▽ More
Positron sources are the key elements for the future and current lepton collider projects such as ILC, CLIC, SuperKEKB, FCC-ee, Muon Collider/LEMMA, etc., introducing challenging critical requirements for high intensity and low emittance beams in order to achieve high luminosity. In fact, due to their large production emittance and constraints given by the target thermal load, the main collider parameters such as the peak and average current, the emittances, the dam** time, the repetition frequency and consequently the luminosity are determined by the positron beam characteristics. In this paper, the conventional positron sources and their main properties are explored for giving an indication to the challenges that apply during the design of the advanced accelerator concepts. The photon-driven positron sources as the novel approach proposed, primarily for the future linear colliders, are described highlighting their variety and problematic.
△ Less
Submitted 29 March, 2022; v1 submitted 10 February, 2022;
originally announced February 2022.
-
Beam Dynamics in Dielectric Laser Acceleration
Authors:
U. Niedermayer,
K. Leedle,
P. Musumeci,
S. A. Schmid
Abstract:
We discuss recent developments and challenges of beam dynamics in Dielectric Laser Acceleration (DLA), for both high and low energy electron beams. Starting from ultra-low emittance nanotip sources the paper follows the beam path of a tentative DLA light source concept. Acceleration in conjuction with focusing is discussed in the framework of Alternating Phase Focusing (APF) and spatial harmonic p…
▽ More
We discuss recent developments and challenges of beam dynamics in Dielectric Laser Acceleration (DLA), for both high and low energy electron beams. Starting from ultra-low emittance nanotip sources the paper follows the beam path of a tentative DLA light source concept. Acceleration in conjuction with focusing is discussed in the framework of Alternating Phase Focusing (APF) and spatial harmonic ponderomotive focusing. The paper concludes with an outlook to the beam dynamics in laser driven nanophotonic undulators, based on tilted DLA grating structures.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
European Strategy for Particle Physics -- Accelerator R&D Roadmap
Authors:
C. Adolphsen,
D. Angal-Kalinin,
T. Arndt,
M. Arnold,
R. Assmann,
B. Auchmann,
K. Aulenbacher,
A. Ballarino,
B. Baudouy,
P. Baudrenghien,
M. Benedikt,
S. Bentvelsen,
A. Blondel,
A. Bogacz,
F. Bossi,
L. Bottura,
S. Bousson,
O. Brüning,
R. Brinkmann,
M. Bruker,
O. Brunner,
P. N. Burrows,
G. Burt,
S. Calatroni,
K. Cassou
, et al. (111 additional authors not shown)
Abstract:
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified…
▽ More
The 2020 update of the European Strategy for Particle Physics emphasised the importance of an intensified and well-coordinated programme of accelerator R&D, supporting the design and delivery of future particle accelerators in a timely, affordable and sustainable way. This report sets out a roadmap for European accelerator R&D for the next five to ten years, covering five topical areas identified in the Strategy update. The R&D objectives include: improvement of the performance and cost-performance of magnet and radio-frequency acceleration systems; investigations of the potential of laser / plasma acceleration and energy-recovery linac techniques; and development of new concepts for muon beams and muon colliders. The goal of the roadmap is to document the collective view of the field on the next steps for the R&D programme, and to provide the evidence base to support subsequent decisions on prioritisation, resourcing and implementation.
△ Less
Submitted 30 March, 2022; v1 submitted 19 January, 2022;
originally announced January 2022.
-
Tapered helical undulator system for high efficiency energy extraction from a high brightness electron beam
Authors:
Y. Park,
R. Agustsson,
W. J. Berg,
J. Byrd,
T. J. Campese,
D. Dang,
P. Denham,
J. Dooling,
A. Fisher,
I. Gadjev,
C. Hall,
J. Isen,
J. **,
A. H. Lumpkin,
A. Murokh,
Y. Sun,
W. H. Tan,
S. Webb,
K. P. Wootton,
A. A. Zholents,
P. Musumeci
Abstract:
In this paper we discuss the design choices and construction strategy of the tapered undulator system designed for a high energy extraction efficiency experiment in the ultraviolet region of the electromagnetic spectrum planned for installation at the Argonne National Laboratory Linac Extension Area (LEA) beamline. The undulator is comprised of 4 sections pure permanent magnet Halbach array separa…
▽ More
In this paper we discuss the design choices and construction strategy of the tapered undulator system designed for a high energy extraction efficiency experiment in the ultraviolet region of the electromagnetic spectrum planned for installation at the Argonne National Laboratory Linac Extension Area (LEA) beamline. The undulator is comprised of 4 sections pure permanent magnet Halbach array separated by short break sections, each one of them housing a focusing quadrupole doublet and a phase shifter. The quadrupoles use a novel hybrid design which allows one to vary the gradient and match the beam transversely. The undulator tapering profile is optimized to maximize the energy conversion efficiency from a 343 MeV 1 kA beam into coherent 257.5 nm radiation taking into account the longitudinal current profile generated by the linac.
△ Less
Submitted 30 November, 2021; v1 submitted 22 November, 2021;
originally announced November 2021.
-
Resonant phase matching by oblique illumination of a dielectric laser accelerator
Authors:
Sophie Crisp,
Alexander Ody,
Pietro Musumeci,
Joel England
Abstract:
In dielectric laser-driven accelerators (DLA), careful tuning of drive-laser wavelength and structure periodicity is typically required in order to hit the resonant condition and match the phase velocity of the accelerating wave to the electron beam velocity. By aggressively detuning (up to 30 mrad) the angle of incidence of the drive laser on a double grating DLA structure, we show that it is pos…
▽ More
In dielectric laser-driven accelerators (DLA), careful tuning of drive-laser wavelength and structure periodicity is typically required in order to hit the resonant condition and match the phase velocity of the accelerating wave to the electron beam velocity. By aggressively detuning (up to 30 mrad) the angle of incidence of the drive laser on a double grating DLA structure, we show that it is possible to recover resonant phase matching and maximize the energy modulation of an externally injected 6 MeV beam in a 800 nm period structure driven using a 780 nm laser. These results show that it is possible to power DLA structures away from their design working point, and excite accelerating fields in the gap with phase profiles that change by a relatively large amount period-to-period. This flexibility is a key feature of DLAs and a critical element in the realization of phase-modulation based ponderomotive focusing to demonstrate MeV energy gain and large capture in a single DLA stage.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
SHarD: A beam dynamics simulationcode for dielectric laser acceleratorsbased on spatial harmonic field expansion
Authors:
Alexander Ody,
Sophie Crisp,
Pietro Musumeci,
David Cesar,
R. Joel England
Abstract:
In order to demonstrate acceleration of electrons to relativistic scales by an on chipdielectric laser accelerator (DLA), a ponderomotive focusing scheme capable of capturingand transporting electrons through nanometer-scale apertures over extended interactionlengths has been proposed. We present a Matlab-based numerical code (SHarD) utilizinga spatial harmonic expansion of the fields within the d…
▽ More
In order to demonstrate acceleration of electrons to relativistic scales by an on chipdielectric laser accelerator (DLA), a ponderomotive focusing scheme capable of capturingand transporting electrons through nanometer-scale apertures over extended interactionlengths has been proposed. We present a Matlab-based numerical code (SHarD) utilizinga spatial harmonic expansion of the fields within the dielectric structure to simulate theevolution of the beam phase space distribution in this scheme. The code can be usedto optimize key-parameters for the accelerator performance such as the final energy,transverse spot size evolution and total number of electrons accelerated through currentlyfabricated structures. Eventually, the simulation model will be applied to inform thephase mask profile to be added to a pulse front tilt drive laser pulse using a liquid crystalmask in the experimental setup being assembled at UCLA Pegasus Laboratory.
△ Less
Submitted 23 July, 2021;
originally announced July 2021.
-
Analytical Scaling Laws for Radiofrequency Based Pulse Compression in Ultrafast Electron Diffraction Beamlines
Authors:
Paul Denham,
Pietro Musumeci
Abstract:
In this paper, we use an envelope equation-based approach to obtain analytical scaling laws for the shortest pulse length achievable using radiofrequency (RF) based bunch compression. The derived formulas elucidate the dependencies on the electron beam energy and beam charge and reveal how to obtain bunches containing 1 million electrons with single-digit fs pulse lengths; relativistic energies ar…
▽ More
In this paper, we use an envelope equation-based approach to obtain analytical scaling laws for the shortest pulse length achievable using radiofrequency (RF) based bunch compression. The derived formulas elucidate the dependencies on the electron beam energy and beam charge and reveal how to obtain bunches containing 1 million electrons with single-digit fs pulse lengths; relativistic energies are strongly desirable. The effect of the non-linearities associated with the RF curvature and the beam propagation in a drift is shown to strongly limit the attainability of extreme compression ratios. Using an additional higher frequency RF cavity is proposed as a method to linearize the bunch compression and enable the generation of ultrashort beams in the sub-femtosecond regime.
△ Less
Submitted 3 June, 2021;
originally announced June 2021.
-
Terawatt attosecond X-ray source driven by a plasma accelerator
Authors:
Claudio Emma,
Xinlu Xu,
Andrew Fisher,
James P. MacArthur,
James Cryan,
Mark J. Hogan,
Pietro Musumeci,
Glen White,
Agostino Marinelli
Abstract:
Plasma accelerators can generate ultra high brightness electron beams which open the door to light sources with smaller physical footprint and properties un-achievable with conventional accelerator technology. In this paper we show that electron beams from Plasma WakeField Accelerators (PWFAs) can generate few-cycle coherent tunable soft X-ray pulses with TW peak power and a duration of tens of at…
▽ More
Plasma accelerators can generate ultra high brightness electron beams which open the door to light sources with smaller physical footprint and properties un-achievable with conventional accelerator technology. In this paper we show that electron beams from Plasma WakeField Accelerators (PWFAs) can generate few-cycle coherent tunable soft X-ray pulses with TW peak power and a duration of tens of attoseconds, an order of magnitude more powerful, shorter and with better stability than state-of-the-art X-ray Free Electron Lasers (XFELs). Such a light source would significantly enhance the ability to experimentally investigate electron dynamics on ultrafast timescales, having broad-ranging impact across multiple scientific fields. Rather than starting from noise as in typical XFELs, the X-rays emission in this approach is driven by coherent radiation from a pre-bunched, near Mega Ampere (MA) current electron beam of attosecond duration. This relaxes the restrictive tolerances which have hindered progress towards utilizing plasma accelerators as coherent X-ray drivers thus far, presenting a new paradigm for advanced-accelerator light source applications.
△ Less
Submitted 9 August, 2021; v1 submitted 13 November, 2020;
originally announced November 2020.
-
Space Charge Aberrations in Single Shot Time-Resolved Transmission Electron Microscopy
Authors:
Paul Denham,
Pietro Musumeci
Abstract:
In this paper, we discuss effects of space charge fields on imaging performance in a single shot time-resolved electron microscope (TEM). Using a Green's function perturbation method, we derive analytical estimates for the effects of space charge nonlinearity on the image formation process and the associated aberration coefficients. The dependence of these coefficients on the initial beam phase sp…
▽ More
In this paper, we discuss effects of space charge fields on imaging performance in a single shot time-resolved electron microscope (TEM). Using a Green's function perturbation method, we derive analytical estimates for the effects of space charge nonlinearity on the image formation process and the associated aberration coefficients. The dependence of these coefficients on the initial beam phase space distribution is elucidated. The results are validated by particle tracking simulations and provide fundamental scaling laws for the trade-off between temporal and spatial resolution in single-shot time-resolved TEM.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Ultrafast optical melting of trimer superstructure in layered 1T'-TaTe2
Authors:
Khalid M. Siddiqui,
Daniel B. Durham,
Frederick Cropp,
Colin Ophus,
Sangeeta Rajpurohit,
Yanglin Zhu,
Johan D. Carlström,
Camille Stavrakas,
Zhiqiang Mao,
Archana Raja,
Pietro Musumeci,
Liang Z. Tan,
Andrew M. Minor,
Daniele Filippetto,
Robert A. Kaindl
Abstract:
Quasi-two-dimensional transition-metal dichalcogenides are a key platform for exploring emergent nanoscale phenomena arising from complex interactions. Access to the underlying degrees-of-freedom on their natural time scales motivates the use of advanced ultrafast probes sensitive to self-organised atomic-scale patterns. Here, we report the first ultrafast investigation of TaTe2, which exhibits un…
▽ More
Quasi-two-dimensional transition-metal dichalcogenides are a key platform for exploring emergent nanoscale phenomena arising from complex interactions. Access to the underlying degrees-of-freedom on their natural time scales motivates the use of advanced ultrafast probes sensitive to self-organised atomic-scale patterns. Here, we report the first ultrafast investigation of TaTe2, which exhibits unique charge and lattice trimer order characterised by a transition upon cooling from stripe-like chains into a $(3 \times 3)$ superstructure of trimer clusters. Utilising MeV-scale ultrafast electron diffraction, we capture the photo-induced TaTe2 structural dynamics -- exposing a rapid $\approx\!1.4$ ps melting of its low-temperature ordered state followed by recovery via thermalisation into a hot cluster superstructure. Density-functional calculations indicate that the initial quench is triggered by intra-trimer Ta charge transfer which destabilises the clusters, unlike melting of charge density waves in other TaX2 compounds. Our work paves the way for further exploration and ultimately rapid optical and electronic manipulation of trimer superstructures.
△ Less
Submitted 9 November, 2021; v1 submitted 7 September, 2020;
originally announced September 2020.
-
A self-consistent numerical approach to track particles in FEL interaction with electromagnetic field modes
Authors:
A. Fisher,
P. Musumeci,
S. B. Van der Geer
Abstract:
In this paper we present a novel approach to FEL simulations based on the decomposition of the electromagnetic field in a finite number of radiation modes. The evolution of each mode amplitude is simply determined by energy conservation. The code is developed as an expansion of the General Particle Tracer framework and adds important capabilities to the suite of well-established numerical simulati…
▽ More
In this paper we present a novel approach to FEL simulations based on the decomposition of the electromagnetic field in a finite number of radiation modes. The evolution of each mode amplitude is simply determined by energy conservation. The code is developed as an expansion of the General Particle Tracer framework and adds important capabilities to the suite of well-established numerical simulations already available to the FEL community. The approach is not based on the period average approximation and can handle long-wavelength waveguide FELs as it is possible to include the dispersion effects of the boundaries. Futhermore, it correctly simulates lower charge systems where both transverse and longitudinal space charge forces still play a significant role in the dynamics. For free-space FEL interactions, a source dependent expansion approximation can be used to limit the number of transverse modes required to model the field profile and speed up the calculation of the system evolution. Three examples are studied in detail including a single pass FEL amplifier, the high efficiency TESSA266 scenario and a THz waveguide FEL operating in the zero-slippage regime.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
An Ultra-Compact X-Ray Free-Electron Laser
Authors:
J. B. Rosenzweig,
N. Majernik,
R. R. Robles,
G. Andonian,
O. Camacho,
A. Fukasawa,
A. Kogar,
G. Lawler,
Jianwei Miao,
P. Musumeci,
B. Naranjo,
Y. Sakai,
R. Candler,
B. Pound,
C. Pellegrini,
C. Emma,
A. Halavanau,
J. Hastings,
Z. Li,
M. Nasr,
S. Tantawi,
P. Anisimov,
B. Carlsten,
F. Krawczyk,
E. Simakov
, et al. (11 additional authors not shown)
Abstract:
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this con…
▽ More
In the field of beam physics, two frontier topics have taken center stage due to their potential to enable new approaches to discovery in a wide swath of science. These areas are: advanced, high gradient acceleration techniques, and x-ray free electron lasers (XFELs). Further, there is intense interest in the marriage of these two fields, with the goal of producing a very compact XFEL. In this context, recent advances in high gradient radio-frequency cryogenic copper structure research have opened the door to the use of surface electric fields between 250 and 500 MV/m. Such an approach is foreseen to enable a new generation of photoinjectors with six-dimensional beam brightness beyond the current state-of-the-art by well over an order of magnitude. This advance is an essential ingredient enabling an ultra-compact XFEL (UC-XFEL). In addition, one may accelerate these bright beams to GeV scale in less than 10 meters. Such an injector, when combined with inverse free electron laser-based bunching techniques can produce multi-kA beams with unprecedented beam quality, quantified by ~50 nm-rad normalized emittances. These beams, when injected into innovative, short-period (1-10 mm) undulators uniquely enable UC-XFELs having footprints consistent with university-scale laboratories. We describe the architecture and predicted performance of this novel light source, which promises photon production per pulse of a few percent of existing XFEL sources. We review implementation issues including collective beam effects, compact x-ray optics systems, and other relevant technical challenges. To illustrate the potential of such a light source to fundamentally change the current paradigm of XFELs with their limited access, we examine possible applications in biology, chemistry, materials, atomic physics, industry, and medicine which may profit from this new model of performing XFEL science.
△ Less
Submitted 14 August, 2020; v1 submitted 12 March, 2020;
originally announced March 2020.
-
Analysis of Skew Quadrupole Compensation in RF-Photoinjectors
Authors:
P. Denham,
F. Cropp,
P. Musumeci
Abstract:
In this paper, we present a detailed analysis of the effects of quadrupole components in radiofrequency (RF) photoinjectors, which could occur either in the RF cavity or in the gun solenoid, and their compensation using a skew quadrupole corrector. The analysis is generalized to the case in which the correction cannot be applied at the same location as the quadrupole. A practical guide to setting…
▽ More
In this paper, we present a detailed analysis of the effects of quadrupole components in radiofrequency (RF) photoinjectors, which could occur either in the RF cavity or in the gun solenoid, and their compensation using a skew quadrupole corrector. The analysis is generalized to the case in which the correction cannot be applied at the same location as the quadrupole. A practical guide to setting the corrector to eliminate correlation in the x-y space is discussed. Particle tracking simulations and measurements of emittance and beam matrix elements obtained at the UCLA Pegasus photoinjector are presented to validate the analysis.
△ Less
Submitted 28 February, 2020;
originally announced March 2020.
-
Map** Photocathode Quantum Efficiency with Ghost Imaging
Authors:
K. Kabra,
S. Li,
F. Cropp,
T. J. Lane,
P. Musumeci,
D. Ratner
Abstract:
Measuring the quantum efficiency (QE) map of a photocathode injector typically requires laser scanning, an invasive operation that involves modifying the injector laser focus and rastering the focused laser spot across the photocathode surface. Raster scanning interrupts normal operation and takes considerable time to setup. In this paper, we demonstrate a novel method of measuring the QE map usin…
▽ More
Measuring the quantum efficiency (QE) map of a photocathode injector typically requires laser scanning, an invasive operation that involves modifying the injector laser focus and rastering the focused laser spot across the photocathode surface. Raster scanning interrupts normal operation and takes considerable time to setup. In this paper, we demonstrate a novel method of measuring the QE map using a ghost imaging framework that correlates the injector laser spatial variation over time with the total charge yield. Ghost imaging enables passive, real-time monitoring of the QE map without manually modifying the injector laser or interrupting injector operation. We first demonstrate the method at the UCLA Pegasus photoinjector with the help of a digital micromirror device (DMD) and a piezoelectric mirror to increase our control of the overall transverse variance of the illumination profile. The reconstruction algorithm parameters are fine-tuned using simulations and the results are validated against the ground truth map acquired using the traditional rastering method. Finally, we apply the technique to data acquired parasitically from the LCLS photoinjector, showing the feasibility of this method to retrieve a QE map without interrupting normal operation.
△ Less
Submitted 25 October, 2019;
originally announced October 2019.
-
Knife-edge based measurement of the 4D transverse phase space of electron beams with picometer-scale emittance
Authors:
Fuhao Ji,
Jorge Giner Navarro,
Pietro Musumeci,
Daniel Durham,
Andrew Minor,
Daniele Filippetto
Abstract:
Precise manipulation of high brightness electron beams requires detailed knowledge of the particle phase space shape and evolution. As ultrafast electron pulses become brighter, new operational regimes become accessible with emittance values in the picometer range, with enormous impact on potential scientific applications. Here we present a new characterization method for such beams and demonstrat…
▽ More
Precise manipulation of high brightness electron beams requires detailed knowledge of the particle phase space shape and evolution. As ultrafast electron pulses become brighter, new operational regimes become accessible with emittance values in the picometer range, with enormous impact on potential scientific applications. Here we present a new characterization method for such beams and demonstrate experimentally its ability to reconstruct the 4D transverse beam matrix of strongly correlated electron beams with sub-nanometer emittance and sub-micrometer spot size, produced with the HiRES beamline at LBNL. Our work extends the reach of ultrafast electron accelerator diagnostics into picometer-range emittance values, opening the way to complex nanometer-scale electron beam manipulation techniques.
△ Less
Submitted 29 March, 2019;
originally announced March 2019.
-
Temporal magnification for streaked ultrafast electron diffraction and microscopy
Authors:
David Cesar,
Pietro Musumeci
Abstract:
One of the frontiers of modern electron scattering instrumentation is improving temporal resolution in order to enable the observation of dynamical phenomena at their fundamental time-scales. We analyze how a radiofrequency cavity can be used as an electron longitudinal lens in order to produce a highly magnified temporal replica of an ultrafast process, and, in combination with a deflecting cavit…
▽ More
One of the frontiers of modern electron scattering instrumentation is improving temporal resolution in order to enable the observation of dynamical phenomena at their fundamental time-scales. We analyze how a radiofrequency cavity can be used as an electron longitudinal lens in order to produce a highly magnified temporal replica of an ultrafast process, and, in combination with a deflecting cavity, enable streaked electron images of optical-frequency phenomena. We present start-to-end simulations of an MeV electron beamline for two variations of this idea (a `magnifying-glass' and a `point-projection' configuration) showing the feasibility for an electron probe to achieve single shot 1.4 fs(rms) temporal resolution.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.
-
All Optical Control of Beam Dynamics in a DLA
Authors:
David Cesar,
Pietro Musumeci,
R. Joel England
Abstract:
Dielectric laser acceleration draws upon nano-fabrication techniques to build photonic structures for high gradient electron acceleration. At the small spatial scales characteristic of these structures conventional accelerator techniques become ineffective at stabilizing the beam dynamics. Instead we propose a scheme to stabilize the motion by directly modulating the drive laser, in analogy to a r…
▽ More
Dielectric laser acceleration draws upon nano-fabrication techniques to build photonic structures for high gradient electron acceleration. At the small spatial scales characteristic of these structures conventional accelerator techniques become ineffective at stabilizing the beam dynamics. Instead we propose a scheme to stabilize the motion by directly modulating the drive laser, in analogy to a radio-frequency-quadrupole. Here we present a design for a programmable `lattice' being built at UCLA's Pegasus laboratory. The accelerator accepts an unmodulated 3.5 MeV electron beam and then bunches and accelerates the beam by 1.5 MeV over a distance of 2 cm.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.
-
Ultrafast Relativistic Electron Nanoprobes
Authors:
Fu-Hao Ji,
Daniel Durham,
Andrew Minor,
Pietro Musumeci,
Jorge Navarro,
Daniele Filippetto
Abstract:
One of the frontiers in electron scattering is to couple ultrafast temporal resolution with highly localized probes to investigate the role of microstructure on material properties. Here, taking advantage of the unprecedented average brightness of the APEX electron gun providing relativistic electron pulses at high repetition rates, we demonstrate for the first time the generation of ultrafast rel…
▽ More
One of the frontiers in electron scattering is to couple ultrafast temporal resolution with highly localized probes to investigate the role of microstructure on material properties. Here, taking advantage of the unprecedented average brightness of the APEX electron gun providing relativistic electron pulses at high repetition rates, we demonstrate for the first time the generation of ultrafast relativistic electron beams with picometer-scale emittance and their ability to probe nanoscale features on materials with complex microstructures. At the sample plane, the APEX beam is tightly focused by a custom in-vacuum lens system based on permanent magnet quadrupoles, and its evolution around the waist is tracked by a knife-edge technique, allowing accurate reconstruction of the beam shape and local density. We then use the focused beam to characterize a Ti-6 wt\% Al polycrystalline sample by correlating the diffraction and imaging modality, showcasing the capability to locate grain boundaries and map adjacent crystallographic domains with sub-micron precision. This work provides a new paradigm for ultrafast electron instrumentation, demonstrating the ability to generate relativistic beams with ultrasmall transverse phase space volumes enabling novel characterization techniques such as relativistic ultrafast electron nano-diffraction and ultrafast scanning transmission electron microscopy.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
Superradiant and stimulated-superradiant emission of bunched electron beams
Authors:
Avraham Gover,
Reuven Ianconescu,
Aharon Friedman,
Claudio Emma,
Nick Sudar,
Pietro Musumeci,
Claudio Pellegrini
Abstract:
We outline the fundamental coherent radiation emission processes from a bunched charged particles beam. In contrast to spontaneous emission of radiation from a random electron beam that is proportional to the number of particles, a pre-bunched electron beam can emit spontaneously coherent radiation proportional to the number of particles - squared, through the process of (spontaneous) superradianc…
▽ More
We outline the fundamental coherent radiation emission processes from a bunched charged particles beam. In contrast to spontaneous emission of radiation from a random electron beam that is proportional to the number of particles, a pre-bunched electron beam can emit spontaneously coherent radiation proportional to the number of particles - squared, through the process of (spontaneous) superradiance (SP-SR) (in the sense of Dicke's). The coherent SP-SR emission of a bunched electron beam can be even further enhanced by a process of stimulated-superradiance (ST-SR) in the presence of a seed injected radiation field. In this review, these coherent radiation emission processes for both single bunch and periodically bunched beams are considered in a model of radiation mode expansion.
The general model of coherent spontaneous emission is extended to the nonlinear regime, particularly for undulator (wiggler) interaction: Tapering-Enhanced Stimulated Superradiant Amplification (TESSA).
Processes of SP-SR and TESSA take place in tapered wiggler seed-injected FELs. In such FELs, operating in the X-Ray regime, these processes are convoluted with other effects. However these fundamental emission concepts are useful guidelines for the strategy of wiggler tapering efficiency and power enhancement.
Based on this model, we review previous theories and experiments on coherent radiation sources based on SP-SR (coherent undulator radiation, synchrotron radiation, Smith-Purcell radiation etc.), in the THz regime and on-going works on tapered wiggler efficiency-enhancement concepts in all optical frequency regimes up to X-Rays.
△ Less
Submitted 23 April, 2019; v1 submitted 17 October, 2018;
originally announced October 2018.
-
Brightness of nonequilibrium photoemission in metallic photocathodes near threshold
Authors:
Jai Kwan Bae,
Ivan Bazarov,
Pietro Musumeci,
Siddharth Karkare,
Howard Padmore,
Jared Maxson
Abstract:
The operation of photoemission electron sources with wavelengths near the photoemission threshold has been shown to dramatically decrease the minimum achievable photocathode emittance, but at the cost of significantly reduced quantum efficiency (QE). In this work, we show that for femtosecond laser and electron pulses, the increase in required laser intensities due to the low QE drives the photoca…
▽ More
The operation of photoemission electron sources with wavelengths near the photoemission threshold has been shown to dramatically decrease the minimum achievable photocathode emittance, but at the cost of significantly reduced quantum efficiency (QE). In this work, we show that for femtosecond laser and electron pulses, the increase in required laser intensities due to the low QE drives the photocathode electronic distribution far from static equilibrium. We adapt an existing dynamic model of the electron occupation under high intensity laser illumination to predict the time-dependent effects of the nonequilibrium electron distribution on the QE, mean transverse energy (MTE), and emission brightness of metal phtocathodes. We find that multiphoton photoemission dramatically alters the MTE as compared to thermal equilibrium models, causing the MTE to no longer be a monotonic function of photon excess energy.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Enhanced energy gain in a dielectric laser accelerator using a tilted pulse front laser
Authors:
D. Cesar,
J. Maxson,
P. Musumeci,
X. Shen,
R. J. England,
K. P. Wootton,
S. Tan
Abstract:
Using an 800 nm, 45 fs pulse-front-tilted laser we demonstrate a record 315 keV energy gain in a dual grating dielectric laser accelerator (DLA) and average accelerating gradients of 560 MV/m over 0.5 mm. These results open a new regime in DLA characterized by significant evolution of the beam distribution in the longitudinal phase space, corresponding to >1/4 of a synchrotron oscillation. By tilt…
▽ More
Using an 800 nm, 45 fs pulse-front-tilted laser we demonstrate a record 315 keV energy gain in a dual grating dielectric laser accelerator (DLA) and average accelerating gradients of 560 MV/m over 0.5 mm. These results open a new regime in DLA characterized by significant evolution of the beam distribution in the longitudinal phase space, corresponding to >1/4 of a synchrotron oscillation. By tilting the laser wavefront we control the resonant velocity of the DLA and observe a net energy gain, indicating that a tapered optical phase could be used to achieve very high energy gain.
△ Less
Submitted 6 April, 2018; v1 submitted 2 April, 2018;
originally announced April 2018.
-
Ultra-High Brightness Electron Beams from Very-High Field Cryogenic Radio-frequency Photocathode Sources
Authors:
J. B. Rosenzweig,
A. Cahill,
B. Carlsten,
G. Castorina,
M. Croia,
C. Emma,
A. Fukusawa,
B. Spataro,
D. Alesini,
V. Dolgashev,
M. Ferrario,
G. Lawler,
R. Li,
C. Limborg,
J. Maxson,
P. Musumeci,
R. Pompili,
S. Tantawi,
O. Williams
Abstract:
Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics stud…
▽ More
Recent investigations of RF copper structures operated at cryogenic temperatures performed by a SLAC-UCLA collaboration have shown a dramatic increase in the maximum surface electric field, to 500 MV/m. We examine use of these fields to enable very high field cryogenic photoinjectors that can attain over an order of magnitude increase in peak electron beam brightness. We present beam dynamics studies relevant to X-ray FEL injectors, using start-to-end simulations that show the high brightness and low emittance of this source enables operation of a compact FEL reaching a photon energy of 80 keV. The preservation of beam brightness in compression, exploiting micro-bunching techniques is discussed. While the gain in brightness at high field is due to increase of the emission current density, further increases in brightness due to lowering of the intrinsic cathode emittance in cryogenic operation are also enabled. While the original proposal for this type of cryogenic, ultra-high field photoinjector has emphasized S-band designs, there are numerous potential advantages that may be conferred by operation in C-band. We examine issues related to experimental implementation in C-band, and expected performance of this type of device in a future hard X-ray FEL such as MaRIE.
△ Less
Submitted 20 January, 2018;
originally announced January 2018.
-
Optical design for increased interaction length in a high gradient dielectric laser accelerator
Authors:
D. Cesar,
J. Maxson,
P. Musumeci,
X. Shen,
R. J. England,
K. P. Wootton
Abstract:
We present a methodology for designing and measuring pulse front tilt in an ultrafast laser for use in dielectric laser acceleration. Previous research into dielectric laser accelerating modules has focused on measuring high accelerating gradients in novel structures, but has done so only for short electron-laser coupling lengths. Here we demonstrate an optical design to extend the laser-electron…
▽ More
We present a methodology for designing and measuring pulse front tilt in an ultrafast laser for use in dielectric laser acceleration. Previous research into dielectric laser accelerating modules has focused on measuring high accelerating gradients in novel structures, but has done so only for short electron-laser coupling lengths. Here we demonstrate an optical design to extend the laser-electron interaction to 1mm.
△ Less
Submitted 3 January, 2018;
originally announced January 2018.
-
An inverse free electron laser acceleration-driven Compton scattering X-ray source
Authors:
I. Gadjev,
N. Sudar,
M. Babzien,
J. Duris,
P. Hoang,
M. Fedurin,
K. Kusche,
R. Malone,
P. Musumeci,
M. Palmer,
I. Pogorelsky,
M. Polyanskiy,
Y. Sakai,
C. Swinson,
O. Williams,
J. B. Rosenzweig
Abstract:
The generation of X-rays and γ-rays based on synchrotron radiation from free electrons, emitted in magnet arrays such as undulators, forms the basis of much of modern X-ray science. This approach has the drawback of requiring very high energy, up to the multi-GeV-scale, electron beams, to obtain the required photon energy. Due to the limit in accelerating gradients in conventional particle acceler…
▽ More
The generation of X-rays and γ-rays based on synchrotron radiation from free electrons, emitted in magnet arrays such as undulators, forms the basis of much of modern X-ray science. This approach has the drawback of requiring very high energy, up to the multi-GeV-scale, electron beams, to obtain the required photon energy. Due to the limit in accelerating gradients in conventional particle accelerators, reaching high energy typically demands use of instruments exceeding 100's of meters in length. Compact, less costly, monochromatic X-ray sources based on very high field acceleration and very short period undulators, however, may revolutionize diverse advanced X-ray applications ranging from novel X-ray therapy techniques to active interrogation of sensitive materials, by making them accessible in cost and size. Such compactness may be obtained by an all-optical approach, which employs a laser-driven high gradient accelerator based on inverse free electron laser (IFEL), followed by a collision point for inverse Compton scattering (ICS), a scheme where a laser is used to provide undulator fields. We present an experimental proof-of-principle of this approach, where a TW-class CO2 laser pulse is split in two, with half used to accelerate a high quality electron beam up to 84 MeV through the IFEL interaction, and the other half acts as an electromagnetic undulator to generate up to 13 keV X-rays via ICS. These results demonstrate the feasibility of this scheme, which can be joined with other techniques such as laser recirculation to yield very compact, high brilliance photon sources, extending from the keV to MeV scale. Furthermore, use of the IFEL acceleration with the ICS interaction produces a train of very high intensity X-ray pulses, thus also permitting a unique tool that can be phase-locked to a laser pulse in frontier pump-probe experimental scenarios.
△ Less
Submitted 2 November, 2017;
originally announced November 2017.
-
Relativistic electron beam acceleration in a zero-slippage terahertz-driven Inverse Free Electron Laser scheme
Authors:
Emma Curry,
Siara Fabbri,
Jared Maxson,
Pietro Musumeci,
Avraham Gover
Abstract:
THz radiation promises breakthrough advances in compact advanced accelerators due to the high frequency and GV/m fields achievable, orders of magnitude larger than in conventional radiofrequency (RF) based accelerators. Compared to laser-driven schemes, the large phase acceptances of THz-driven accelerators are advantageous for operation with sizable charge. Despite burgeoning research, THz source…
▽ More
THz radiation promises breakthrough advances in compact advanced accelerators due to the high frequency and GV/m fields achievable, orders of magnitude larger than in conventional radiofrequency (RF) based accelerators. Compared to laser-driven schemes, the large phase acceptances of THz-driven accelerators are advantageous for operation with sizable charge. Despite burgeoning research, THz sources, particularly laser-based ones, cannot yet compete with the efficiency of RF amplifiers for high average current accelerators. Nevertheless, THz-based phase space manipulation is of immediate interest for a variety of applications, including generation and diagnostics of ultrashort bunches for electron diffraction/microscopy and compact free-electron laser applications.
The challenge of maintaining overlap and synchronism between an electron beam and short laser-generated THz pulse has so far limited interactions to the few mm scale. We discuss a novel scheme for simultaneous group and phase velocity matching of nearly single-cycle THz radiation with a relativistic electron beam for meter-scale interaction. We demonstrate energy modulations of up to 150 keV using modest THz pulse energies (up to 1 uJ). We apply this large and efficient energy exchange for beam compression and time-stam** of a relativistic beam, paving the way towards realizing the unique opportunities enabled by laser-based THz accelerators.
△ Less
Submitted 5 October, 2017; v1 submitted 21 August, 2017;
originally announced August 2017.
-
Demonstration of cascaded modulator-chicane micro-bunching of a relativistic electron beam
Authors:
N. Sudar,
P. Musumeci,
I. Gadjev,
Y. Sakai,
S. Fabbri,
M. Polyanskiy,
I. Pogorelsky,
M. Fedurin,
C. Swinson,
K. Kusche,
M. Babzien,
M. Palmer
Abstract:
We present results of an experiment showing the first successful demonstration of a cascaded micro-bunching scheme. Two modulator-chicane pre-bunchers arranged in series and a high power mid-IR laser seed are used to modulate a 52 MeV electron beam into a train of sharp microbunches phase-locked to the external drive laser. This configuration allows to increase the fraction of electrons trapped in…
▽ More
We present results of an experiment showing the first successful demonstration of a cascaded micro-bunching scheme. Two modulator-chicane pre-bunchers arranged in series and a high power mid-IR laser seed are used to modulate a 52 MeV electron beam into a train of sharp microbunches phase-locked to the external drive laser. This configuration allows to increase the fraction of electrons trapped in a strongly tapered inverse free electron laser (IFEL) undulator to 96\%, with up to 78\% of the particles accelerated to the final design energy yielding a significant improvement compared to the classical single buncher scheme. These results represent a critical advance in laser-based longitudinal phase space manipulations and find application both in high gradient advanced acceleration as well as in high peak and average power coherent radiation sources.
△ Less
Submitted 17 August, 2017;
originally announced August 2017.
-
Nonlinear response in high-field dielectric laser accelerators
Authors:
D. Cesar,
S. Custodio,
J. Maxson,
P. Musumeci,
X. Shen,
E. Threlkeld,
R. J. England,
A. Hanuka,
I. V. Makasyuk,
E. A. Peralta,
K. P. Wootton,
Z. Wu
Abstract:
Laser powered dielectric structures achieve high-gradient particle acceleration by taking advantage of modern laser technology capable of producing electric fields in excess of 10GV/m. These fields can drive the bulk dielectric beyond its linear response, and break the phase synchronicity between the accelerating field and the electrons. We show how control of the pulse dispersion can be used to c…
▽ More
Laser powered dielectric structures achieve high-gradient particle acceleration by taking advantage of modern laser technology capable of producing electric fields in excess of 10GV/m. These fields can drive the bulk dielectric beyond its linear response, and break the phase synchronicity between the accelerating field and the electrons. We show how control of the pulse dispersion can be used to compensate the effect of self-phase modulation and maximize the energy gain in the laser accelerator.In our experiment, a high brightness 8MeV e-beam is used to probe accelerating fields of 1.8GV/m in a 'grating-reset' dielectric structure illuminated by a 45fs laser pulse with a fluence of 0.7J/cm$^2$.
△ Less
Submitted 7 July, 2017;
originally announced July 2017.
-
Tapering Enhanced Stimulated Superradiant Oscillator
Authors:
J. Duris,
P. Musumeci,
N. Sudar,
A. Murokh,
A. Gover
Abstract:
In this paper, we present a new kind of high power and high efficiency free-electron laser oscillator based on the application of the tapering enhanced stimulated superradiant amplification (TESSA) scheme. The main characteristic of the TESSA scheme is a high intensity seed pulse which provides high gradient beam deceleration and efficient energy extraction. In the oscillator configuration, the TE…
▽ More
In this paper, we present a new kind of high power and high efficiency free-electron laser oscillator based on the application of the tapering enhanced stimulated superradiant amplification (TESSA) scheme. The main characteristic of the TESSA scheme is a high intensity seed pulse which provides high gradient beam deceleration and efficient energy extraction. In the oscillator configuration, the TESSA undulator is driven by a high repetition rate electron beam and embedded in an optical cavity. A beam-splitter is used for outcoupling a fraction of the amplified power and recirculate the remainder as the intense seed for the next electron beam pulse. The mirrors in the oscillator cavity refocus the seed at the undulator entrance and monochromatize the radiation. In this paper we discuss the optimization of the system for a technologically relevant example at 1 $μ$m using a 1~MHz repetition rate electron linac starting with an externally injected igniter pulse.
△ Less
Submitted 3 October, 2017; v1 submitted 17 April, 2017;
originally announced April 2017.
-
Direct measurement of sub-10 fs relativistic electron beams with ultralow emittance
Authors:
Jared Maxson,
David Cesar,
Giacomo Calmasini,
Alexander Ody,
Pietro Musumeci,
David Alesini
Abstract:
Ultralow emittance ($\leq20$ nm, normalized) electron beams with $10^5$ electrons per bunch are obtained by tightly focusing an ultrafast ($\sim$ 100 fs) laser pulse on the cathode of a 1.6 cell radiofrequency photoinjector. Taking advantage of the small initial longitudinal emittance, a downstream velocity bunching cavity is used to compress the beam to $<10$ fs rms bunch length. The measurement…
▽ More
Ultralow emittance ($\leq20$ nm, normalized) electron beams with $10^5$ electrons per bunch are obtained by tightly focusing an ultrafast ($\sim$ 100 fs) laser pulse on the cathode of a 1.6 cell radiofrequency photoinjector. Taking advantage of the small initial longitudinal emittance, a downstream velocity bunching cavity is used to compress the beam to $<10$ fs rms bunch length. The measurement is performed using a thick high voltage deflecting cavity which is shown to be well-suited to measure ultrashort durations of bunching beams, provided that the beam reaches a ballistic longitudinal focus at the cavity center.
△ Less
Submitted 9 March, 2017; v1 submitted 5 November, 2016;
originally announced November 2016.
-
Ultrafast laser pulse heating of metallic photocathodes and its contribution to intrinsic emittance
Authors:
J. Maxson,
P. Musumeci,
L. Cultrera,
S. Karkare,
H. Padmore
Abstract:
The heating of the electronic distribution of a copper photocathode due to an intense drive laser pulse is calculated under the two-temperature model using fluences and pulse lengths typical in RF photoinjector operation. Using the finite temperature-extended relations for the photocathode intrinsic emittance and quantum efficiency, the time-dependent emittance growth due to the same photoemission…
▽ More
The heating of the electronic distribution of a copper photocathode due to an intense drive laser pulse is calculated under the two-temperature model using fluences and pulse lengths typical in RF photoinjector operation. Using the finite temperature-extended relations for the photocathode intrinsic emittance and quantum efficiency, the time-dependent emittance growth due to the same photoemission laser pulse is calculated. This laser heating is seen to limit the intrinsic emittance achievable for photoinjectors using short laser pulses and low quantum efficiency metal photocathodes. A pump-probe photocathode experiment in a standard 1.6 cell S-band gun is proposed, in which simulations show the time dependent thermal emittance modulation within the bunch from laser heating can persist for meters downstream and, in principle, be measured using a slice emittance diagnostic.
△ Less
Submitted 22 August, 2016; v1 submitted 17 June, 2016;
originally announced June 2016.
-
High efficiency energy extraction from a relativistic electron beam in a strongly tapered undulator
Authors:
Nicholas Sudar,
Pietro Musumeci,
Joe Duris,
Ivan Gadjev,
Mikhail Polyaniy,
Igor Pogorelsky,
Mikhail Fedurin,
Christina Swinson,
Marcus Babzien,
Karl Kusche,
Avi Gover
Abstract:
We present results of an experiment where, using a 200 GW CO2 laser seed, a 65 MeV electron beam was decelerated down to 35 MeV in a 54 cm long strongly tapered helical magnetic undulator, extracting over 30$\%$ of the initial electron beam energy to coherent radiation. These results demonstrate unparalleled electro-optical conversion efficiencies for a relativistic beam in an undulator field and…
▽ More
We present results of an experiment where, using a 200 GW CO2 laser seed, a 65 MeV electron beam was decelerated down to 35 MeV in a 54 cm long strongly tapered helical magnetic undulator, extracting over 30$\%$ of the initial electron beam energy to coherent radiation. These results demonstrate unparalleled electro-optical conversion efficiencies for a relativistic beam in an undulator field and represent an important step in the development of high peak and average power coherent radiation sources.
△ Less
Submitted 4 May, 2016;
originally announced May 2016.
-
Demonstration of single-shot picosecond time-resolved MeV electron imaging using a compact permanent magnet quadrupole based lens
Authors:
D. Cesar,
J. Maxson,
P. Musumeci,
Y. Sun,
J. Harrison,
P. Frigola,
F. H. O'Shea,
H. To,
D. Alesini,
R. K. Li
Abstract:
We present the results of an experiment where a short focal length (~ 1.3 cm) permanent magnet electron lens is used to image micron-size features of a metal sample in a single shot, using an ultra- high brightness ps-long 4 MeV electron beam from a radiofrequency photoinjector. Magnifcation ratios in excess of 30x were obtained using a triplet of compact, small gap (3.5 mm), Halbach-style permane…
▽ More
We present the results of an experiment where a short focal length (~ 1.3 cm) permanent magnet electron lens is used to image micron-size features of a metal sample in a single shot, using an ultra- high brightness ps-long 4 MeV electron beam from a radiofrequency photoinjector. Magnifcation ratios in excess of 30x were obtained using a triplet of compact, small gap (3.5 mm), Halbach-style permanent magnet quadrupoles with nearly 600 T/m field gradients. These results pave the way to- wards single shot time-resolved electron microscopy and open new opportunities in the applications of high brightness electron beams.
△ Less
Submitted 4 April, 2016;
originally announced April 2016.
-
THz based phase space manipulation in a zero-slippage IFEL
Authors:
E. Curry,
S. Fabbri,
P. Musumeci,
A. Gover
Abstract:
We describe an IFEL interaction driven by a guided broadband THz source to compress a relativistic electron bunch and synchronize it with an external laser pulse. A high field near single-cycle THz pulse, generated via optical rectification from the external laser source, is group velocity-matched to the electron bunch inside a waveguide, allowing for a sustained interaction in a magnetic undulato…
▽ More
We describe an IFEL interaction driven by a guided broadband THz source to compress a relativistic electron bunch and synchronize it with an external laser pulse. A high field near single-cycle THz pulse, generated via optical rectification from the external laser source, is group velocity-matched to the electron bunch inside a waveguide, allowing for a sustained interaction in a magnetic undulator. We present measurements of the THz waveform before and after a curved parallel plate waveguide with varying aperture size and estimate the reduced group velocity. For a proof-of-concept experiment at the UCLA PEGASUS laboratory, a 6 MeV, 100 fs electron bunch with an initial 0.03 % energy spread can be readily produced. Given these parameters and a projected THz peak field of 10 MV/m, our simulation model predicts a phase space rotation of the bunch distribution that compresses the electron bunch by nearly an order of magnitude and reduces any initial timing jitter within the phase acceptance window. We also discuss the application of this guided-THz IFEL experimental set-up towards a THz streaking diagnostic with the potential for femtosecond scale temporal resolution.
△ Less
Submitted 15 March, 2016;
originally announced March 2016.
-
Next Generation High Brightness Electron Beams From Ultra-High Field Cryogenic Radiofrequency Photocathode Sources
Authors:
J. B. Rosenzweig,
A. Cahill,
V. Dolgashev,
C. Emma,
A. Fukusawa,
R. Li,
C. Limborg,
J. Maxson,
P. Musumeci,
A. Nause,
R. Pakter,
R. Pompili,
R. Roussel,
B. Spataro,
S. Tantawi
Abstract:
Recent studies of the performance of radio-frequency (RF) copper cavities operated at cryogenic temperatures have shown a dramatic increase in the maximum achievable surface electric field. We propose to exploit this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode, a significant…
▽ More
Recent studies of the performance of radio-frequency (RF) copper cavities operated at cryogenic temperatures have shown a dramatic increase in the maximum achievable surface electric field. We propose to exploit this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode, a significant increase in five-dimensional electron beam brightness. We present detailed studies of the beam dynamics associated with such a system, by examining an S-band photoinjector operated at 250 MV/m peak electric field that reaches normalized emittances in the 40 nm-rad range at charges (100-200 pC) suitable for use in a hard X-ray free-electron laser (XFEL) scenario based on the LCLS. In this case, we show by start-to-end simulations that the properties of this source may give rise to high efficiency operation of an XFEL, and permit extension of the photon energy reach by an order of magnitude, to over 80 keV. The brightness needed for such XFELs is achieved through low source emittances in tandem with high current after compression. In the XFEL examples analyzed, the emittances during final compression are preserved using micro-bunching techniques. Extreme low emittance scenarios obtained at pC charge, appropriate for significantly extending temporal resolution limits of ultrafast electron diffraction and microscopy experiments, are also reviewed. While the increase in brightness in a cryogenic photoinjector is mainly due to the augmentation of the emission current density via field enhancement, further possible increases in performance arising from lowering the intrinsic cathode emittance in cryogenic operation are also analyzed. Issues in experimental implementation, including cavity optimization for lowering cryogenic thermal dissipation, external coupling, and cryo-cooler system are discussed.
△ Less
Submitted 30 December, 2018; v1 submitted 4 March, 2016;
originally announced March 2016.
-
Tapering Enhanced Stimulated Superradiant Amplification
Authors:
Joseph Duris,
Alex Murokh,
Pietro Musumeci
Abstract:
High conversion efficiency between electrical and optical power is highly desirable both for high peak and high average power radiation sources. In this paper, we discuss a new mechanism based on stimulated superradiant emission in a strongly tapered undulator whereby an optimal undulator tapering is calculated by dynamically matching the resonant energy variation to the ponderomotive decelerating…
▽ More
High conversion efficiency between electrical and optical power is highly desirable both for high peak and high average power radiation sources. In this paper, we discuss a new mechanism based on stimulated superradiant emission in a strongly tapered undulator whereby an optimal undulator tapering is calculated by dynamically matching the resonant energy variation to the ponderomotive decelerating gradient. The method has the potential to allow the extraction of a large fraction (~50%) of power from a relativistic electron beam and convert it into coherent narrow-band tunable radiation, and shows a clear path to very high average power radiation sources.
△ Less
Submitted 29 October, 2014; v1 submitted 24 October, 2014;
originally announced October 2014.
-
Single-shot MeV transmission electron microscopy with picosecond temporal resolution
Authors:
R. K. Li,
P. Musumeci
Abstract:
Pushing the limits in temporal resolution for transmission electron microscopy (TEM) requires a revolutionary change in the electron source technology. In this paper we study the possibility of employing a radiofrequency photoinjector as the electron source for a time-resolved TEM. By raising the beam energy to the relativistic regime we minimize the space charge effects which otherwise limit the…
▽ More
Pushing the limits in temporal resolution for transmission electron microscopy (TEM) requires a revolutionary change in the electron source technology. In this paper we study the possibility of employing a radiofrequency photoinjector as the electron source for a time-resolved TEM. By raising the beam energy to the relativistic regime we minimize the space charge effects which otherwise limit the spatio-temporal resolution of the instrument. Analysis and optimization of the system taking into account the achievable beam brightness, electron flux on the sample, chromatic and spherical aberration of the electron optic system, and space charge effects in image formation are presented and supported by detailed numerical modeling. The results demonstrate the feasibility of 10 nanometer - 10 picosecond spatio-temporal resolution single-shot MeV TEM.
△ Less
Submitted 23 May, 2014;
originally announced May 2014.