Showing 1–50 of 261 results for author: Murphy, D

Retrieval of the physical parameters of galaxies from WEAVE-StePS-like data using machine learning

Authors: J. Angthopo, B. R. Granett, F. La Barbera, M. Longhetti, A. Iovino, M. Fossati, F. R. Ditrani, L. Costantin, S. Zibetti, A. Gallazzi, P. Sánchez-Blázquez, C. Tortora, C. Spiniello, B. Poggianti, A. Vazdekis, M. Balcells, S. Bardelli, C. R. Benn, M. Bianconi, M. Bolzonella, G. Busarello, L. P. Cassarà, E. M. Corsini, O. Cucciati, G. Dalton , et al. (24 additional authors not shown)

Abstract: The WHT Enhanced Area Velocity Explorer (WEAVE) is a new, massively multiplexing spectrograph. This new instrument will be exploited to obtain high S/N spectra of $\sim$25000 galaxies at intermediate redshifts for the WEAVE Stellar Population Survey (WEAVE-StePS). We test machine learning methods for retrieving the key physical parameters of galaxies from WEAVE-StePS-like spectra using both photom… ▽ More The WHT Enhanced Area Velocity Explorer (WEAVE) is a new, massively multiplexing spectrograph. This new instrument will be exploited to obtain high S/N spectra of $\sim$25000 galaxies at intermediate redshifts for the WEAVE Stellar Population Survey (WEAVE-StePS). We test machine learning methods for retrieving the key physical parameters of galaxies from WEAVE-StePS-like spectra using both photometric and spectroscopic information at various S/Ns and redshifts. We simulated $\sim$105000 galaxy spectra assuming SFH with an exponentially declining star formation rate, covering a wide range of ages, stellar metallicities, sSFRs, and dust extinctions. We then evaluated the ability of the random forest and KNN algorithms to correctly predict such parameters assuming no measurement errors. We checked how much the predictive ability deteriorates for different S/Ns and redshifts, finding that both algorithms still accurately estimate the ages and metallicities with low bias. The dispersion varies from 0.08-0.16 dex for ages and 0.11-0.25 dex for metallicity, depending on the redshift and S/N. For dust attenuation, we find a similarly low bias and dispersion. For the sSFR, we find a very good constraining power for star-forming galaxies, log sSFR$\gtrsim$ -11, where the bias is $\sim$ 0.01 dex and the dispersion is $\sim$ 0.10 dex. For more quiescent galaxies, with log sSFR$\lesssim$ -11, we find a higher bias, 0.61-0.86 dex, and a higher dispersion, $\sim$ 0.4 dex, for different S/Ns and redshifts. Generally, we find that the RF outperforms the KNN. Finally, the retrieved sSFR was used to successfully classify galaxies as part of the blue cloud, green valley, or red sequence. We demonstrate that machine learning algorithms can accurately estimate the physical parameters of simulated galaxies even at relatively low S/N=10 per angstrom spectra with available ancillary photometric information. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Comments: 19 pages, 10 + 2 figures, 4 tables, accepted in A&A

Dependence of the Reconstructed Core-Collapse Supernova Gravitational Wave High-Frequency Feature on the Nuclear Equation of State, in Real Interferometric Data

Authors: R. Daniel Murphy, Alejandro Casallas-Lagos, Anthony Mezzacappa, Michele Zanolin, Ryan E. Landfield, Eric J. Lentz, Pedro Marronetti, Javier M. Antelis, Claudia Moreno

Abstract: We present an analysis of gravitational wave (GW) predictions from five two-dimensional Core Collapse Supernova (CCSN) simulations that varied only in the Equation of State (EOS) implemented. The GW signals from these simulations are used to produce spectrograms in the absence of noise, and the emergent high-frequency feature (HFF) is found to differ quantitatively between simulations. Below 1 kHz… ▽ More We present an analysis of gravitational wave (GW) predictions from five two-dimensional Core Collapse Supernova (CCSN) simulations that varied only in the Equation of State (EOS) implemented. The GW signals from these simulations are used to produce spectrograms in the absence of noise, and the emergent high-frequency feature (HFF) is found to differ quantitatively between simulations. Below 1 kHz, the HFF is well approximated by a first-order polynomial in time. The resulting slope was found to vary between 10-50% across all models. Further, using real interferometric noise we investigated the current capabilities of GW detectors to resolve these differences in HFF slope for a Galactic CCSN. We find that for distances up to 1 kpc, current detectors can resolve HFF slopes that vary by at least 30%. For further Galactic distances, current detectors are capable of distinguishing the upper and lower bounds of the HFF slope for grou**s of our models that varied in EOS. With the higher sensitivity of future GW detectors, and with improved analysis of the HFF, our ability to resolve properties of the HFF will improve for all Galactic distances. This study shows the potential of using the HFF of CCSN produced GWs to provide insight into the physical processes occurring deep within CCSN during collapse, and in particular its potential to further constrain the EOS through GW detection. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Comments: 22 pages, 10 figures

Fires in the deep: The luminosity distribution of early-time gamma-ray-burst afterglows in light of the Gamow Explorer sensitivity requirements

Authors: D. A. Kann, N. E. White, G. Ghirlanda, S. R. Oates, A. Melandri, M. Jelinek, A. de Ugarte Postigo, A. J. Levan, A. Martin-Carrillo, G. S. -H. Paek, L. Izzo, M. Blazek, C. Thone, J. F. Agui Fernandez, R. Salvaterra, N. R. Tanvir, T. -C. Chang, P. O'Brien, A. Rossi, D. A. Perley, M. Im, D. B. Malesani, A. Antonelli, S. Covino, C. Choi , et al. (36 additional authors not shown)

Abstract: Gamma-ray bursts (GRBs) are ideal probes of the Universe at high redshift (z > 5), pinpointing the locations of the earliest star-forming galaxies and providing bright backlights that can be used to spectrally fingerprint the intergalactic medium and host galaxy during the period of reionization. Future missions such as Gamow Explorer are being proposed to unlock this potential by increasing the r… ▽ More Gamma-ray bursts (GRBs) are ideal probes of the Universe at high redshift (z > 5), pinpointing the locations of the earliest star-forming galaxies and providing bright backlights that can be used to spectrally fingerprint the intergalactic medium and host galaxy during the period of reionization. Future missions such as Gamow Explorer are being proposed to unlock this potential by increasing the rate of identification of high-z GRBs to rapidly trigger observations from 6-10 m ground telescopes, JWST, and the Extremely Large Telescopes. Gamow was proposed to the NASA 2021 Medium-Class Explorer (MIDEX) program as a fast-slewing satellite featuring a wide-field lobster-eye X-ray telescope (LEXT) to detect and localize GRBs, and a 30 cm narrow-field multi-channel photo-z infrared telescope (PIRT) to measure their photometric redshifts using the Lyman-alpha dropout technique. To derive the PIRT sensitivity requirement we compiled a complete sample of GRB optical-near-infrared afterglows from 2008 to 2021, adding a total of 66 new afterglows to our earlier sample, including all known high-z GRB afterglows. We performed full light-curve and spectral-energy-distribution analyses of these afterglows to derive their true luminosity at very early times. For all the light curves, where possible, we determined the brightness at the time of the initial finding chart of Gamow, at different high redshifts and in different NIR bands. We then followed the evolution of the luminosity to predict requirements for ground and space-based follow-up. We find that a PIRT sensitivity of 15 micro-Jy (21 mag AB) in a 500 s exposure simultaneously in five NIR bands within 1000s of the GRB trigger will meet the Gamow mission requirement to recover > 80% of all redshifts at z > 5. △ Less

Submitted 29 February, 2024; originally announced March 2024.

Comments: 44 pages, 10 figures, 1 table. Accepted for publication in Astronomy and Astrophysics 15 Feb 2024. Abstract abridged for arXiv

Journal ref: A&A 686, A56 (2024)

Long-Distance Nuclear Matrix Elements for Neutrinoless Double-Beta Decay from Lattice QCD

Authors: Zohreh Davoudi, William Detmold, Zhenghao Fu, Anthony V. Grebe, William Jay, David Murphy, Patrick Oare, Phiala E. Shanahan, Michael L. Wagman

Abstract: Neutrinoless double-beta ($0νββ$) decay is a heretofore unobserved process which, if observed, would imply that neutrinos are Majorana particles. Interpretations of the stringent experimental constraints on $0νββ$-decay half-lives require calculations of nuclear matrix elements. This work presents the first lattice quantum-chromodynamics (LQCD) calculation of the matrix element for $0νββ$ decay in… ▽ More Neutrinoless double-beta ($0νββ$) decay is a heretofore unobserved process which, if observed, would imply that neutrinos are Majorana particles. Interpretations of the stringent experimental constraints on $0νββ$-decay half-lives require calculations of nuclear matrix elements. This work presents the first lattice quantum-chromodynamics (LQCD) calculation of the matrix element for $0νββ$ decay in a multi-nucleon system, specifically the $nn \rightarrow pp ee$ transition, mediated by a light left-handed Majorana neutrino propagating over nuclear-scale distances. This calculation is performed with quark masses corresponding to a pion mass of $m_π= 806$ MeV at a single lattice spacing and volume. The statistically cleaner $Σ^- \rightarrow Σ^+ ee$ transition is also computed in order to investigate various systematic uncertainties. The prospects for matching the results of LQCD calculations onto a nuclear effective field theory to determine a leading-order low-energy constant relevant for $0νββ$ decay with a light Majorana neutrino are investigated. This work, therefore, sets the stage for future calculations at physical values of the quark masses that, combined with effective field theory and nuclear many-body studies, will provide controlled theoretical inputs to experimental searches of $0νββ$ decay. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Comments: 16 pages, 7 figures

Report number: FERMILAB-PUB-24-0067-T, MIT-CTP/5682, UMD-PP-024-03

The Gaia-ESO Survey: The DR5 analysis of the medium-resolution GIRAFFE and high-resolution UVES spectra of FGK-type stars

Authors: C. C. Worley, R. Smiljanic, L. Magrini, A. Frasca, E. Franciosini, D. Montes, D. K. Feuillet, H. M. Tabernero, J. I. González Hernández, S. Villanova, Š. Mikolaitis, K. Lind, G. Tautvaišienė, A. R. Casey, A. J. Korn, P. Bonifacio, C. Soubiran, E. Caffau, G. Guiglion, T. Merle, A. Hourihane, A. Gonneau, P. François, S. Randich, G. Gilmore , et al. (20 additional authors not shown)

Abstract: The Gaia-ESO Survey is an European Southern Observatory (ESO) public spectroscopic survey that targeted $10^5$ stars in the Milky Way covering the major populations of the disk, bulge and halo. The observations were made using FLAMES on the VLT obtaining both UVES high ($R\sim47,000$) and GIRAFFE medium ($R\sim20,000$) resolution spectra. The analysis of the Gaia-ESO spectra was the work of mult… ▽ More The Gaia-ESO Survey is an European Southern Observatory (ESO) public spectroscopic survey that targeted $10^5$ stars in the Milky Way covering the major populations of the disk, bulge and halo. The observations were made using FLAMES on the VLT obtaining both UVES high ($R\sim47,000$) and GIRAFFE medium ($R\sim20,000$) resolution spectra. The analysis of the Gaia-ESO spectra was the work of multiple analysis teams (nodes) within five working groups (WG). The homogenisation of the stellar parameters within WG11 (high resolution observations of FGK stars) and the homogenisation of the stellar parameters within WG10 (medium resolution observations of FGK stars) is described here. In both cases, the homogenisation was carried out using a bayesian Inference method developed specifically for the Gaia-ESO Survey by WG11. The WG10 homogenisation primarily used the cross-match of stars with WG11 as the reference set in both the stellar parameter and chemical abundance homogenisation. In this way the WG10 homogenised results have been placed directly onto the WG11 stellar parameter and chemical abundance scales. The reference set for the metal-poor end was sparse which limited the effectiveness of the homogenisation in that regime. For WG11, the total number of stars for which stellar parameters were derived was 6,231 with typical uncertainties for Teff, log g and [Fe/H] of 32~K, 0.05 and 0.05 respectively. One or more chemical abundances out of a possible 39 elements were derived for 6,188 of the stars. For WG10, the total number of stars for which stellar parameters were derived was 76,675 with typical uncertainties for Teff, log g and [Fe/H] of 64~K, 0.15 and 0.07 respectively. One or more chemical abundances out of a possible 30 elements were derived for 64,177 of the stars. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Comments: 31 pages, 19 figures

Computer Vision for Primate Behavior Analysis in the Wild

Authors: Richard Vogg, Timo Lüddecke, Jonathan Henrich, Sharmita Dey, Matthias Nuske, Valentin Hassler, Derek Murphy, Julia Fischer, Julia Ostner, Oliver Schülke, Peter M. Kappeler, Claudia Fichtel, Alexander Gail, Stefan Treue, Hansjörg Scherberger, Florentin Wörgötter, Alexander S. Ecker

Abstract: Advances in computer vision as well as increasingly widespread video-based behavioral monitoring have great potential for transforming how we study animal cognition and behavior. However, there is still a fairly large gap between the exciting prospects and what can actually be achieved in practice today, especially in videos from the wild. With this perspective paper, we want to contribute towards… ▽ More Advances in computer vision as well as increasingly widespread video-based behavioral monitoring have great potential for transforming how we study animal cognition and behavior. However, there is still a fairly large gap between the exciting prospects and what can actually be achieved in practice today, especially in videos from the wild. With this perspective paper, we want to contribute towards closing this gap, by guiding behavioral scientists in what can be expected from current methods and steering computer vision researchers towards problems that are relevant to advance research in animal behavior. We start with a survey of the state-of-the-art methods for computer vision problems that are directly relevant to the video-based study of animal behavior, including object detection, multi-individual tracking, (inter)action recognition and individual identification. We then review methods for effort-efficient learning, which is one of the biggest challenges from a practical perspective. Finally, we close with an outlook into the future of the emerging field of computer vision for animal behavior, where we argue that the field should move fast beyond the common frame-by-frame processing and treat video as a first-class citizen. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Roadmap on Photovoltaic Absorber Materials for Sustainable Energy Conversion

Authors: James C. Blakesley, Ruy S. Bonilla, Marina Freitag, Alex M. Ganose, Nicola Gasparini, Pascal Kaienburg, George Koutsourakis, Jonathan D. Major, Jenny Nelson, Nakita K. Noel, Bart Roose, Jae Sung Yun, Simon Aliwell, Pietro P. Altermatt, Tayebeh Ameri, Virgil Andrei, Ardalan Armin, Diego Bagnis, Jenny Baker, Hamish Beath, Mathieu Bellanger, Philippe Berrouard, Jochen Blumberger, Stuart A. Boden, Hugo Bronstein , et al. (61 additional authors not shown)

Abstract: Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO₂eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.… ▽ More Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO₂eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the photovoltaics community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: 160 pages, 21 figures

Deriving the intrinsic properties of M51 with radiative transfer models

Authors: Christopher J. Inman, Cristina C. Popescu, Mark T. Rushton, David Murphy

Abstract: A quantitative derivation of the intrinsic properties of galaxies related to their fundamental building blocks, gas, dust and stars is essential for our understanding of galaxy evolution. A fully self-consistent derivation of these properties can be achieved with radiative transfer (RT) methods that are constrained by panchromatic imaging observations. Here we present an axi-symmetric RT model of… ▽ More A quantitative derivation of the intrinsic properties of galaxies related to their fundamental building blocks, gas, dust and stars is essential for our understanding of galaxy evolution. A fully self-consistent derivation of these properties can be achieved with radiative transfer (RT) methods that are constrained by panchromatic imaging observations. Here we present an axi-symmetric RT model of the UV-optical-FIR/submm spectral and spatial energy distribution of the face-on spiral galaxy M51. The model reproduces reasonably well the azimuthally averaged radial profiles derived from the imaging data available for this galaxy, from GALEX, SDSS, 2MASS, Spitzer and Herschel. We model the galaxy with three distinct morphological components: a bulge, an inner disc and a main disc. We derive the length parameters of the stellar emissivity and of the dust distribution. We also derive the intrinsic global and spatially resolved parameters of M51. We find a faint \lq\lq outer disc\rq\rq\ bridging M51 with its companion galaxy M51b. Finally, we present and discuss an alternative model, with dust properties that change within the galaxy. △ Less

Submitted 5 October, 2023; originally announced October 2023.

Comments: 22 pages, 14 figures; accepted in MNRAS for publication, Sept 7 2023

Terahertz imaging through emissivity control

Authors: Michal Mrnka, Harry Penketh, Ian R. Hooper, Sonal Saxena, Nicholas E. Grant, John D. Murphy, David B. Phillips, Euan Hendry

Abstract: Adoption of terahertz technologies is hindered by the lack of cost-effective THz sources. Here we demonstrate a fundamentally new way to generate and control THz radiation, via spatio-temporal emissivity modulation. By patterning the optical photoexcitation of a surface-passivated silicon wafer, we locally control the free-electron density, and thereby pattern the wafer's emissivity in the THz par… ▽ More Adoption of terahertz technologies is hindered by the lack of cost-effective THz sources. Here we demonstrate a fundamentally new way to generate and control THz radiation, via spatio-temporal emissivity modulation. By patterning the optical photoexcitation of a surface-passivated silicon wafer, we locally control the free-electron density, and thereby pattern the wafer's emissivity in the THz part of the electromagnetic spectrum. We show how this unconventional source of controllable THz radiation enables a new form of incoherent computational THz imaging. We use it to image various concealed objects, demonstrating this scheme has the penetrating capability of state-of-the-art THz imaging approaches, without the requirement of femto-second pulsed laser sources. Furthermore, the incoherent nature of thermal radiation also ensures the obtained images are free of interference artifacts. Our spatio-temporal emissivity control paves the way towards a new family of long-wavelength structured illumination, imaging and spectroscopy systems. △ Less

Submitted 23 August, 2023; originally announced August 2023.

Stellar metallicity from optical and UV spectral indices: Test case for WEAVE-StePS

Authors: F. R. Ditrani, M. Longhetti, F. La Barbera, A. Iovino, L. Costantin, S. Zibetti, A. Gallazzi, M. Fossati, J. Angthopo, Y. Ascasibar, B. Poggianti, P. Sánchez-Blázquez, M. Balcells, M. Bianconi, M. Bolzonella, L. P. Cassarà, O. Cucciati, G. Dalton, A. Ferré-Mateu, R. García-Benito, B. Granett, M. Gullieuszik, A. Ikhsanova, S. **, J. H. Knapen , et al. (13 additional authors not shown)

Abstract: The upcoming generation of optical spectrographs on four meter-class telescopes, with their huge multiplexing capabilities, excellent spectral resolution, and unprecedented wavelength coverage, will provide high-quality spectra for thousands of galaxies. These data will allow us to examine of the stellar population properties at intermediate redshift, an epoch that remains unexplored by large and… ▽ More The upcoming generation of optical spectrographs on four meter-class telescopes, with their huge multiplexing capabilities, excellent spectral resolution, and unprecedented wavelength coverage, will provide high-quality spectra for thousands of galaxies. These data will allow us to examine of the stellar population properties at intermediate redshift, an epoch that remains unexplored by large and deep surveys. We assess our capability to retrieve the mean stellar metallicity in galaxies at different redshifts and S/N, while simultaneously exploiting the UV and optical rest-frame wavelength coverage. The work is based on a comprehensive library of spectral templates of stellar populations, covering a wide range of age and metallicity values and built assuming various SFHs. We simulated realistic observations of a large sample of galaxies carried out with WEAVE at the WHT at different redshifts and S/N values. We measured all the reliable indices on the simulated spectra and on the comparison library. We then adopted a Bayesian approach to obtain the probability distribution of stellar metallicity. The analysis of the spectral indices has shown how some mid-UV indices can provide reliable constraints on stellar metallicity, along with optical indicators. The analysis of the mock observations has shown that even at S/N=10, the metallicity can be derived within 0.3 dex, in particular, for stellar populations older than 2 Gyr. Our results are in good agreement with other theoretical and observational works in the literature and show how the UV indicators can be advantageous in constraining metallicities. This is very promising for the upcoming surveys carried out with new, highly multiplexed, large-field spectrographs, such as StePS at the WEAVE and 4MOST, which will provide spectra of thousands of galaxies covering large spectral ranges at relatively high S/N. △ Less

Submitted 4 August, 2023; originally announced August 2023.

Comments: 16 pages, 14 figures. Submitted 31/03/2023, Accepted 20/07/2023

Journal ref: A&A 677, A93 (2023)

Bounding The Orlov Spectrum For A Completion Of Discrete Cluster Categories

Authors: Dave Murphy

Abstract: We classify thick subcategories in a Paquette-Yıldırım completion $\overline{\mathcal{C}}$ of a discrete cluster category of Dynkin type $A_{\infty}$. To do this we introduce the notion of homologically connected objects, and the hc (=homologically connected) decomposition of an object into homologically connected objects in a $\mathrm{Hom}$-finite, Krull-Schmidt triangulated category. We show tha… ▽ More We classify thick subcategories in a Paquette-Yıldırım completion $\overline{\mathcal{C}}$ of a discrete cluster category of Dynkin type $A_{\infty}$. To do this we introduce the notion of homologically connected objects, and the hc (=homologically connected) decomposition of an object into homologically connected objects in a $\mathrm{Hom}$-finite, Krull-Schmidt triangulated category. We show that any object in a $\overline{\mathcal{C}}$ has a hc decomposition, and that the hc decomposition determines the thick closure of an object. Moreover, we use this result to classify the classical generators of $\overline{\mathcal{C}}$ as homologically connected objects satisfying a maximality condition. Every homologically connected object has an invariant, known as the homological length, and we show that in $\overline{\mathcal{C}}$ this homological length is an upper bound for the generation time of a classical generator. This allows us to provide an upper bound for the Orlov spectrum of $\overline{\mathcal{C}}$, as well as giving the Rouquier dimension. △ Less

Submitted 3 August, 2023; originally announced August 2023.

Comments: 31 pages, Sections 3 and 5 overlap with author's PhD thesis

MSC Class: 18G80 (Primary) 13F60 (Secondary)

Plasma density profile reconstruction of a gas cell for Ionization Induced Laser Wakefield Acceleration

Authors: F. Filippi, L. T. Dickson, M. Backhouse, P. Forestier-Colleoni, C. Gustafsson, C. Cobo, C. Ballage, S. Dobosz Dufrénoy, E. Löfquist, G. Maynard, C. D. Murphy, Z. Najmudin, F. Panza, A. Persson, M. Scisciò, O. Vasilovici, O. Lundh, B. Cros

Abstract: Laser-driven plasma wakefields can provide hundreds of MeV electron beam in mm-range distances potentially shrinking the dimension of the actual particle accelerators. The plasma density plays a fundamental role in the control and stability of the acceleration process, which is a key development for the future electron injector proposed by EuPRAXIA. A gas cell was designed by LPGP and LIDYL teams,… ▽ More Laser-driven plasma wakefields can provide hundreds of MeV electron beam in mm-range distances potentially shrinking the dimension of the actual particle accelerators. The plasma density plays a fundamental role in the control and stability of the acceleration process, which is a key development for the future electron injector proposed by EuPRAXIA. A gas cell was designed by LPGP and LIDYL teams, with variable length and backing pressure, to confine the gas and tailor the gas density profile before the arrival of the laser. This cell was used during an experimental campaign with the multi TW-class laser at the Lund Laser Centre. Ionization assisted injection in a tailored density profile is used to tune the electron beam properties. During the experiment, we filled the gas cell with hydrogen mixed with different concentration of nitrogen. We also varied the backing pressure of the gas and the geometrical length of the gas cell. We used a transverse probe to acquire shadowgraphic images of the plasma and to measure the plasma electron density. Methods and results of the analysis with comparisons between shadowgraphic and interferometric images will be discussed. △ Less

Submitted 8 May, 2023; v1 submitted 19 April, 2023; originally announced April 2023.

Comments: Approved by JINST

The Gaia-ESO Survey: homogenisation of stellar parameters and elemental abundances

Authors: A. Hourihane, P. Francois, C. C. Worley, L. Magrini, A. Gonneau, A. R. Casey, G. Gilmore, S. Randich, G. G. Sacco, A. Recio-Blanco, A. J. Korn, C. Allende Prieto, R. Smiljanic, R. Blomme, A. Bragaglia, N. A. Walton, S. Van Eck, T. Bensby, A Lanzafame, A. Frasca, E. Franciosini, F. Damiani, K. Lind, M. Bergemann, P. Bonifacio , et al. (37 additional authors not shown)

Abstract: The Gaia-ESO Survey is a public spectroscopic survey that has targeted $\gtrsim10^5$ stars covering all major components of the Milky Way from the end of 2011 to 2018, delivering its public final release in May 2022. Unlike other spectroscopic surveys, Gaia-ESO is the only survey that observed stars across all spectral types with dedicated, specialised analyses: from O (… ▽ More The Gaia-ESO Survey is a public spectroscopic survey that has targeted $\gtrsim10^5$ stars covering all major components of the Milky Way from the end of 2011 to 2018, delivering its public final release in May 2022. Unlike other spectroscopic surveys, Gaia-ESO is the only survey that observed stars across all spectral types with dedicated, specialised analyses: from O ($T_\mathrm{eff} \sim 30,000-52,000$~K) all the way to K-M ($\gtrsim$3,500~K). The physics throughout these stellar regimes varies significantly, which has previously prohibited any detailed comparisons between stars of significantly different type. In the final data release (internal data release 6) of the Gaia-ESO Survey, we provide the final database containing a large number of products such as radial velocities, stellar parameters and elemental abundances, rotational velocity, and also, e.g., activity and accretion indicators in young stars and membership probability in star clusters for more than 114,000 stars. The spectral analysis is coordinated by a number of Working Groups (WGs) within the Survey, which specialise in the various stellar samples. Common targets are analysed across WGs to allow for comparisons (and calibrations) amongst instrumental setups and spectral types. Here we describe the procedures employed to ensure all Survey results are placed on a common scale to arrive at a single set of recommended results for all Survey collaborators to use. We also present some general quality and consistency checks performed over all Survey results. △ Less

Submitted 16 April, 2023; originally announced April 2023.

Comments: A&A accepted, minor revision, 36 pages, 38 figures

Journal ref: A&A 676, A129 (2023)

The status of the human gene catalogue

Authors: Paulo Amaral, Silvia Carbonell-Sala, Francisco M. De La Vega, Tiago Faial, Adam Frankish, Thomas Gingeras, Roderic Guigo, Jennifer L Harrow, Artemis G. Hatzigeorgiou, Rory Johnson, Terence D. Murphy, Mihaela Pertea, Kim D. Pruitt, Shashikant Pujar, Hazuki Takahashi, Igor Ulitsky, Ales Varabyou, Christine A. Wells, Mark Yandell, Piero Carninci, Steven L. Salzberg

Abstract: Scientists have been trying to identify all of the genes in the human genome since the initial draft of the genome was published in 2001. Over the intervening years, much progress has been made in identifying protein-coding genes, and the estimated number has shrunk to fewer than 20,000, although the number of distinct protein-coding isoforms has expanded dramatically. The invention of high-throug… ▽ More Scientists have been trying to identify all of the genes in the human genome since the initial draft of the genome was published in 2001. Over the intervening years, much progress has been made in identifying protein-coding genes, and the estimated number has shrunk to fewer than 20,000, although the number of distinct protein-coding isoforms has expanded dramatically. The invention of high-throughput RNA sequencing and other technological breakthroughs have led to an explosion in the number of reported non-coding RNA genes, although most of them do not yet have any known function. A combination of recent advances offers a path forward to identifying these functions and towards eventually completing the human gene catalogue. However, much work remains to be done before we have a universal annotation standard that includes all medically significant genes, maintains their relationships with different reference genomes, and describes clinically relevant genetic variants. △ Less

Submitted 24 March, 2023; originally announced March 2023.

Comments: 14 pages

Compact Symmetric Objects -- III Evolution of the High-Luminosity Branch and a Possible Connection with Tidal Disruption Events

Authors: A. C. S. Readhead, V. Ravi, R. D. Blandford, A. G. Sullivan, J. Somalwar, M. C. Begelman, M. Birkinshaw, I. Liodakis, M. L. Lister, T. J. Pearson, G. B. Taylor, P. N. Wilkinson, N. Globus, S. Kiehlmann, C. R. Lawrence, D. Murphy, S. O'Neill, V. Pavlidou, E. Sheldahl, A. Siemiginowska, K. Tassis

Abstract: We use a sample of 54 Compact Symmetric Objects (CSOs) to confirm that there are two unrelated CSO classes: an edge-dimmed, low-luminosity class (CSO~1), and an edge-brightened, high-luminosity class (CSO~2). Using blind tests, we show that CSO~2s consist of three sub-classes: CSO 2.0, having prominent hot-spots at the leading edges of narrow jets and/or narrow lobes; CSO~2.2, without prominent ho… ▽ More We use a sample of 54 Compact Symmetric Objects (CSOs) to confirm that there are two unrelated CSO classes: an edge-dimmed, low-luminosity class (CSO~1), and an edge-brightened, high-luminosity class (CSO~2). Using blind tests, we show that CSO~2s consist of three sub-classes: CSO 2.0, having prominent hot-spots at the leading edges of narrow jets and/or narrow lobes; CSO~2.2, without prominent hot-spots, and with broad jets and/or lobes; and CSO~2.1, which exhibit mixed properties. Most CSO 2s do not evolve into larger jetted-AGN, but spend their whole life-cycle as CSOs of size $\lesssim$500 pc and age $\lesssim$5000 yr. The minimum energies needed to produce the radio luminosity and structure in CSO~2s range from $\sim~10^{-4}\,M_\odot{c}^2$ to $\sim7\,M_\odot{c}^2$. We show that the transient nature of most CSO~2s, and their birthrate, can be explained through ignition in the tidal disruption events of giant stars. We also consider possibilities of tap** the spin energy of the supermassive black hole, and tap** the energy of the accretion disk. Our results demonstrate that CSOs constitute a large family of AGN in which we have thus far studied only the brightest. More comprehensive CSO studies, with higher sensitivity, resolution, and dynamic range, will revolutionize our understanding of AGN and the central engines that power them. △ Less

Submitted 26 November, 2023; v1 submitted 20 March, 2023; originally announced March 2023.

Comments: 44 pages, 16 figures, 9 tables, accepted for publication

WEAVE-StePS. A stellar population survey using WEAVE at WHT

Authors: A. Iovino, B. M. Poggianti, A. Mercurio, M. Longhetti, M. Bolzonella, G. Busarello, M. Gullieuszik, F. LaBarbera, P. Merluzzi, L. Morelli, C. Tortora, D. Vergani, S. Zibetti, C. P. Haines, L. Costantin, F. R. Ditrani, L. Pozzetti, J. Angthopo, M. Balcells, S. Bardelli, C. R. Benn, M. Bianconi, L. P. Cassarà, E. M. Corsini, O. Cucciati , et al. (22 additional authors not shown)

Abstract: The upcoming new generation of optical spectrographs on four-meter-class telescopes will provide valuable opportunities for forthcoming galaxy surveys through their huge multiplexing capabilities, excellent spectral resolution, and unprecedented wavelength coverage. WEAVE is a new wide-field spectroscopic facility mounted on the 4.2 m William Herschel Telescope in La Palma. WEAVE-StePS is one of t… ▽ More The upcoming new generation of optical spectrographs on four-meter-class telescopes will provide valuable opportunities for forthcoming galaxy surveys through their huge multiplexing capabilities, excellent spectral resolution, and unprecedented wavelength coverage. WEAVE is a new wide-field spectroscopic facility mounted on the 4.2 m William Herschel Telescope in La Palma. WEAVE-StePS is one of the five extragalactic surveys that will use WEAVE during its first five years of operations. It will observe galaxies using WEAVE MOS (~950 fibres across a field of view of ~3 deg2 on the sky) in low-resolution mode (R~5000, spanning the wavelength range 3660-9590 AA). WEAVE-StePS will obtain high-quality spectra (S/N ~ 10 per AA at R~5000) for a magnitude-limited (I_AB = 20.5) sample of ~25,000 galaxies, the majority selected at z>=0.3. The survey goal is to provide precise spectral measurements in the crucial interval that bridges the gap between LEGA-C and SDSS data. The wide area coverage of ~25 deg2 will enable us to observe galaxies in a variety of environments. The ancillary data available in each observed field (including X-ray coverage, multi-narrow-band photometry and spectroscopic redshift information) will provide an environmental characterisation for each observed galaxy. This paper presents the science case of WEAVE-StePS, the fields to be observed, the parent catalogues used to define the target sample, and the observing strategy chosen after a forecast of the expected performance of the instrument for our typical targets. WEAVE-StePS will go back further in cosmic time than SDSS, extending its reach to encompass more than ~6 Gyr, nearly half of the age of the Universe. The spectral and redshift range covered by WEAVE-StePS will open a new observational window by continuously tracing the evolutionary path of galaxies in the largely unexplored intermediate-redshift range. △ Less

Submitted 14 February, 2023; originally announced February 2023.

Comments: 15 pages, 9 figures, A&A in press

Journal ref: A&A 672, A87 (2023)

Analysis of high-energy drop impact onto deep liquid pool

Authors: Hui Wang, Shuo Liu, Annie-Claude Bayeul-Lainé, David Murphy, Joseph Katz, Olivier Coutier-Delgosha

Abstract: The present work is devoted to the analysis of drop impact onto a deep liquid pool. It is focused on the effects of high-energy splash regimes, caused by the impact of large raindrops at high velocities. Such cases are characterized by short time scales and complex mechanisms, and they have thus received little attention until now. The BASILISK open-source solver is used to perform three-dimension… ▽ More The present work is devoted to the analysis of drop impact onto a deep liquid pool. It is focused on the effects of high-energy splash regimes, caused by the impact of large raindrops at high velocities. Such cases are characterized by short time scales and complex mechanisms, and they have thus received little attention until now. The BASILISK open-source solver is used to perform three-dimensional Direct Numerical Simulations (DNS). The capabilities of the octree adaptive mesh refinement techniques enable to capture the small-scale features of the flow, while the Volume of Fluid (VOF) approach combined with a balanced force surface tension calculation is applied to advect the volume fraction of the liquids and reconstruct the interfaces. The numerical results compare well with experimental visualizations: both the evolution of crown and cavity, the emanation of ligaments, the formation of bubble canopy, and the growth of the downward spiral jet that pierces through the cavity bottom, are correctly reproduced. Reliable quantitative agreements are also obtained regarding the time evolution of rim positions, cavity dimensions and droplet distributions through an observation window. Furthermore, simulation gives access to various aspects of the internal flows (velocity, vorticity, pressure, energy budget), which allows to better explain the corresponding physical phenomena. Details of the early dynamics of bubble ring entrapment and splashing performance, the formation/collapse of bubble canopy, and the spreading of drop liquid, are discussed. The statistics of droplet size show the bimodal distribution in time, corroborating distinct primary mechanisms of droplet production at different stages. △ Less

Submitted 6 February, 2023; originally announced February 2023.

From prosumer to flexumer: Case study on the value of flexibility in decarbonizing the multi-energy system of a manufacturing company

Authors: Markus Fleschutz, Markus Bohlayer, Marco Braun, Michael D. Murphy

Abstract: Digitalization and sector coupling enable companies to turn into flexumers. By using the flexibility of their multi-energy system (MES), they reduce costs and carbon emissions while stabilizing the electricity system. However, to identify the necessary investments in energy conversion and storage technologies to leverage demand response (DR) potentials, companies need to assess the value of flexib… ▽ More Digitalization and sector coupling enable companies to turn into flexumers. By using the flexibility of their multi-energy system (MES), they reduce costs and carbon emissions while stabilizing the electricity system. However, to identify the necessary investments in energy conversion and storage technologies to leverage demand response (DR) potentials, companies need to assess the value of flexibility. Therefore, this study quantifies the flexibility value of a production company's MES by optimizing the synthesis, design, and operation of a decarbonizing MES considering self-consumption optimization, peak shaving, and integrated DR based on hourly prices and carbon emission factors (CEFs). The detailed case study of a beverage company in northern Germany considers vehicle-to-X of powered industrial trucks, power-to-heat on multiple temperatures, wind turbines, photovoltaic systems, and energy storage systems (thermal energy, electricity, and hydrogen). We propose and apply novel data-driven metrics to evaluate the intensity of price-based and CEF-based DR. The results reveal that flexibility usage reduces decarbonization costs (by 19-80% depending on electricity and carbon removal prices), total annual costs, operating carbon emissions, energy-weighted average prices and CEFs, and fossil energy dependency. The results also suggest that a net-zero operational carbon emission MES requires flexibility, which, in an economic case, is provided by a combination of different flexible technologies and storage systems that complement each other. While the value of flexibility depends on various market and consumer-specific factors such as electricity or carbon removal prices, this study highlights the importance of demand flexibility for the decarbonization of MESs. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: 23 pages, 28 figures, research paper

CubeSats for Gamma-Ray Astronomy

Authors: Peter F. Bloser, David Murphy, Fabrizio Fiore, Jeremy Perkins

Abstract: After many years of flying in space primarily for educational purposes, CubeSats - tiny satellites with form factors corresponding to arrangements of "1U" units, or cubes, each 10 cm on a side - have come into their own as valuable platforms for technology advancement and scientific investigations. CubeSats offer comparatively rapid, low-cost access to space for payloads that be built, tested, and… ▽ More After many years of flying in space primarily for educational purposes, CubeSats - tiny satellites with form factors corresponding to arrangements of "1U" units, or cubes, each 10 cm on a side - have come into their own as valuable platforms for technology advancement and scientific investigations. CubeSats offer comparatively rapid, low-cost access to space for payloads that be built, tested, and operated by relatively small teams, with substantial contributions from students and early career researchers. Continuing advances in compact, low-power detectors, readout electronics, and flight computers have now enabled X-ray and gamma-ray sensing payloads that can fit within the constraints of CubeSat missions, permitting in-orbit demonstrations of new techniques and innovative high-energy astronomy observations. Gamma-ray-sensing CubeSats are certain to make an important contribution in the new era of multi-messenger, time-domain astronomy by detecting and localizing bright transients such as gamma-ray bursts, solar flares, and terrestrial gamma-ray flashes; however, other astrophysical science areas requiring long observations in a low-background environment, including gamma-ray polarimetry, studies of nuclear lines, and measurement of diffuse backgrounds, will likely benefit as well. We present the primary benefits of CubeSats for high-energy astronomy, highlight the scientific areas currently or soon to be studied, and review the missions that are currently operating, under development, or proposed. A rich portfolio of CubeSats for gamma-ray astronomy already exists, and the potential for a broad range of creative and scientifically productive missions in the near future is very high. △ Less

Submitted 21 December, 2022; originally announced December 2022.

Comments: Book chapter for the "Handbook of X-ray and Gamma-ray Astrophysics", Section "Optics and Detectors for Gamma-ray Astrophysics" (Editors in chief: C. Bambi and A. Santangelo, Springer Singapore). 33 pages, 11 figures

Report number: LA-UR-22-30861

The wide-field, multiplexed, spectroscopic facility WEAVE: Survey design, overview, and simulated implementation

Authors: Shoko **, Scott C. Trager, Gavin B. Dalton, J. Alfonso L. Aguerri, J. E. Drew, Jesús Falcón-Barroso, Boris T. Gänsicke, Vanessa Hill, Angela Iovino, Matthew M. Pieri, Bianca M. Poggianti, D. J. B. Smith, Antonella Vallenari, Don Carlos Abrams, David S. Aguado, Teresa Antoja, Alfonso Aragón-Salamanca, Yago Ascasibar, Carine Babusiaux, Marc Balcells, R. Barrena, Giuseppina Battaglia, Vasily Belokurov, Thomas Bensby, Piercarlo Bonifacio , et al. (190 additional authors not shown)

Abstract: WEAVE, the new wide-field, massively multiplexed spectroscopic survey facility for the William Herschel Telescope, will see first light in late 2022. WEAVE comprises a new 2-degree field-of-view prime-focus corrector system, a nearly 1000-multiplex fibre positioner, 20 individually deployable 'mini' integral field units (IFUs), and a single large IFU. These fibre systems feed a dual-beam spectrogr… ▽ More WEAVE, the new wide-field, massively multiplexed spectroscopic survey facility for the William Herschel Telescope, will see first light in late 2022. WEAVE comprises a new 2-degree field-of-view prime-focus corrector system, a nearly 1000-multiplex fibre positioner, 20 individually deployable 'mini' integral field units (IFUs), and a single large IFU. These fibre systems feed a dual-beam spectrograph covering the wavelength range 366$-$959\,nm at $R\sim5000$, or two shorter ranges at $R\sim20\,000$. After summarising the design and implementation of WEAVE and its data systems, we present the organisation, science drivers and design of a five- to seven-year programme of eight individual surveys to: (i) study our Galaxy's origins by completing Gaia's phase-space information, providing metallicities to its limiting magnitude for $\sim$3 million stars and detailed abundances for $\sim1.5$ million brighter field and open-cluster stars; (ii) survey $\sim0.4$ million Galactic-plane OBA stars, young stellar objects and nearby gas to understand the evolution of young stars and their environments; (iii) perform an extensive spectral survey of white dwarfs; (iv) survey $\sim400$ neutral-hydrogen-selected galaxies with the IFUs; (v) study properties and kinematics of stellar populations and ionised gas in $z<0.5$ cluster galaxies; (vi) survey stellar populations and kinematics in $\sim25\,000$ field galaxies at $0.3\lesssim z \lesssim 0.7$; (vii) study the cosmic evolution of accretion and star formation using $>1$ million spectra of LOFAR-selected radio sources; (viii) trace structures using intergalactic/circumgalactic gas at $z>2$. Finally, we describe the WEAVE Operational Rehearsals using the WEAVE Simulator. △ Less

Submitted 31 October, 2023; v1 submitted 7 December, 2022; originally announced December 2022.

Comments: 41 pages, 27 figures, accepted for publication by MNRAS; updated version including information on individual grants in a revised Acknowledgements section, corrections to the affiliation list, and an updated references list

The VST ATLAS Quasar Survey I: Catalogue

Authors: Alice Eltvedt, T. Shanks, N. Metcalfe, B. Ansarinejad, L. F. Barrientos, R. Sharp, U. Malik, D. N. A. Murphy, M. Irwin, M. Wilson, D. M. Alexander, A. Kovacs, J. Garcia-Bellido, S. Ahlen, D. Brooks, A. de la Macorra, A. Font-Ribera, S. Gontcho a Gontcho, K. Honscheid, A. Meisner, R. Miquel, J. Nie, G. Tarlé, M. Vargas-Magaña, Z. Zhou

Abstract: We present the VST ATLAS Quasar Survey, consisting of $\sim1,229,000$ quasar (QSO) candidates with $16<g<22.5$ over $\sim4700$ deg$^2$. The catalogue is based on VST ATLAS$+$NEOWISE imaging surveys and aims to reach a QSO sky density of $130$ deg$^{-2}$ for $z<2.2$ and $\sim30$ deg$^{-2}$ for $z>2.2$. One of the aims of this catalogue is to select QSO targets for the 4MOST Cosmology Redshift Surve… ▽ More We present the VST ATLAS Quasar Survey, consisting of $\sim1,229,000$ quasar (QSO) candidates with $16<g<22.5$ over $\sim4700$ deg$^2$. The catalogue is based on VST ATLAS$+$NEOWISE imaging surveys and aims to reach a QSO sky density of $130$ deg$^{-2}$ for $z<2.2$ and $\sim30$ deg$^{-2}$ for $z>2.2$. One of the aims of this catalogue is to select QSO targets for the 4MOST Cosmology Redshift Survey. To guide our selection, we use X-ray/UV/optical/MIR data in the extended William Herschel Deep Field (WHDF) where we find a $g<22.5$ broad-line QSO density of $269\pm67$ deg$^{-2}$, roughly consistent with the expected $\sim196$ deg$^{-2}$. We also find that $\sim25$% of our QSOs are morphologically classed as optically extended. Overall, we find that in these deep data, MIR, UV and X-ray selections are all $\sim70-90$% complete while X-ray suffers less contamination than MIR and UV. MIR is however more sensitive than X-ray or UV to $z>2.2$ QSOs at $g<22.5$ and the eROSITA limit. We then adjust the selection criteria from our previous 2QDES pilot survey and prioritise VST ATLAS candidates that show both UV and MIR excess, while also selecting candidates initially classified as extended. We test our selections using data from DESI (which will be released in DR1) and 2dF to estimate the efficiency and completeness of our selections, and finally we use ANNz2 to determine photometric redshifts for the QSO candidate catalogue. Applying over the $\sim4700$ deg$^2$ ATLAS area gives us $\sim917,000$ $z<2.2$ QSO candidates of which 472,000 are likely to be $z<2.2$ QSOs, implying a sky density of $\sim$100 deg$^{-2}$, which our WHDF analysis suggests will rise to at least 130 deg$^{-2}$ when eROSITA X-ray candidates are included. At $z>2.2$, we find $\sim310,000$ candidates, of which 169,000 are likely to be QSOs for a sky density of $\sim36$ deg$^{-2}$. △ Less

Submitted 14 November, 2022; originally announced November 2022.

VRContour: Bringing Contour Delineations of Medical Structures Into Virtual Reality

Authors: Chen Chen, Matin Yarmand, Varun Singh, Michael V. Sherer, James D. Murphy, Yang Zhang, Nadir Weibel

Abstract: Contouring is an indispensable step in Radiotherapy (RT) treatment planning. However, today's contouring software is constrained to only work with a 2D display, which is less intuitive and requires high task loads. Virtual Reality (VR) has shown great potential in various specialties of healthcare and health sciences education due to the unique advantages of intuitive and natural interactions in i… ▽ More Contouring is an indispensable step in Radiotherapy (RT) treatment planning. However, today's contouring software is constrained to only work with a 2D display, which is less intuitive and requires high task loads. Virtual Reality (VR) has shown great potential in various specialties of healthcare and health sciences education due to the unique advantages of intuitive and natural interactions in immersive spaces. VR-based radiation oncology integration has also been advocated as a target healthcare application, allowing providers to directly interact with 3D medical structures. We present VRContour and investigate how to effectively bring contouring for radiation oncology into VR. Through an autobiographical iterative design, we defined three design spaces focused on contouring in VR with the support of a tracked tablet and VR stylus, and investigating dimensionality for information consumption and input (either 2D or 2D + 3D). Through a within-subject study (n = 8), we found that visualizations of 3D medical structures significantly increase precision, and reduce mental load, frustration, as well as overall contouring effort. Participants also agreed with the benefits of using such metaphors for learning purposes. △ Less

Submitted 7 November, 2022; v1 submitted 21 October, 2022; originally announced October 2022.

Comments: C. Chen, M. Yarmand, V. Singh, M.V. Sherer, J.D. Murphy, Y. Zhang and N. Weibel, "VRContour: Bringing Contour Delineations of Medical Structures Into Virtual Reality", 2022 IEEE International Symposium on Mixed and Augmented Reality (ISMAR), 2022, pp. 1-10, doi: 10.1109/ISMAR55827.2022.00020

Status of QUBIC, the Q&U Bolometer for Cosmology

Authors: L. Mousset, P. Ade, A. Almela, G. Amico, L. H. Arnaldi, J. Aumont, S. Banfi, E. S. Battistelli, B. Bélier, L. Bergé, J. -Ph. Bernard, P. de Bernardis, M. Bersanelli, J. Bonaparte, J. D. Bonilla, E. Bunn, D. Buzi, D. Camilieri, F. Cavaliere, P. Chanial, C. Chapron, S. Colombo, F. Columbro, A. Coppolecchia, B. Costanza , et al. (86 additional authors not shown)

Abstract: The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregr… ▽ More The Q&U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Back-ground (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematics with those of bolometric detectors in terms of wide-band, background-limited sensitivity. △ Less

Submitted 6 October, 2022; originally announced October 2022.

Comments: Contribution to the 2022 Cosmology session of the 33rd Rencontres de Blois. arXiv admin note: substantial text overlap with arXiv:2203.08947

PSFs of coadded images

Authors: Rachel Mandelbaum, Mike Jarvis, Robert H. Lupton, James Bosch, Arun Kannawadi, Michael D. Murphy, Tianqing Zhang, the LSST Dark Energy Science Collaboration

Abstract: We provide a detailed exploration of the connection between choice of coaddition schemes and the point-spread function (PSF) of the resulting coadded images. In particular, we investigate what properties of the coaddition algorithm lead to the final coadded image having a well-defined PSF. The key elements of this discussion are as follows: 1. We provide an illustration of how linear coaddition… ▽ More We provide a detailed exploration of the connection between choice of coaddition schemes and the point-spread function (PSF) of the resulting coadded images. In particular, we investigate what properties of the coaddition algorithm lead to the final coadded image having a well-defined PSF. The key elements of this discussion are as follows: 1. We provide an illustration of how linear coaddition schemes can produce a coadd that lacks a well-defined PSF even for relatively simple scenarios and choices of weight functions. 2. We provide a more formal demonstration of the fact that a linear coadd only has a well-defined PSF in the case that either (a) each input image has the same PSF or (b) the coadd is produced with weights that are independent of the signal. 3. We discuss some reasons that two plausible nonlinear coaddition algorithms (median and clipped-mean) fail to produce a consistent PSF profile for stars. 4. We demonstrate that all nonlinear coaddition procedures fail to produce a well-defined PSF for extended objects. In the end, we conclude that, for any purpose where a well-defined PSF is desired, one should use a linear coaddition scheme with weights that do not correlate with the signal and are approximately uniform across typical objects of interest. △ Less

Submitted 2 February, 2023; v1 submitted 19 September, 2022; originally announced September 2022.

Comments: 13 pages, 4 figures; pedagogical article; v2 accepted for publication in the Open Journal of Astrophysics

Journal ref: The Open Journal of Astrophysics, Vol. 6, 2023

Mechanisms to control laser-plasma coupling in laser wakefield electron acceleration

Authors: L. T. Dickson, C. I. D. Underwood, F. Filippi, R. J. Shalloo, J. Björklund Svensson, D. Guénot, K. Svendsen, I. Moulanier, S. Dobosz Dufrénoy, C. D. Murphy, N. C. Lopes, P. P. Rajeev, Z. Najmudin, G. Cantono, A. Persson, O. Lundh, G. Maynard, M. J. V. Streeter, B. Cros

Abstract: Experimental results, supported by precise modelling, demonstrate optimisation of a plasma-based injector with intermediate laser pulse energy ($<1$ J), corresponding to a normalised vector potential $a_0 = 2.15$, using ionisation injection in a tailored plasma density profile. An increase in electron bunch quality and energy is achieved experimentally with the extension of the density downramp at… ▽ More Experimental results, supported by precise modelling, demonstrate optimisation of a plasma-based injector with intermediate laser pulse energy ($<1$ J), corresponding to a normalised vector potential $a_0 = 2.15$, using ionisation injection in a tailored plasma density profile. An increase in electron bunch quality and energy is achieved experimentally with the extension of the density downramp at the plasma exit. Optimisation of the focal position of the laser pulse in the tailored plasma density profile is shown to efficiently reduce electron bunch angular deviation, leading to a better alignment of the electron bunch with the laser axis. Single peak electron spectra are produced in a previously unexplored regime by combining an early focal position and adaptive optic control of the laser wavefront through optimising the symmetry of the pre-focal laser energy distribution. Experimental results have been validated through particle-in-cell simulations using realistic laser energy, phase distribution, and temporal envelope, allowing for accurate predictions of difficult to model parameters, such as total charge and spatial properties of the electron bunches, opening the way for more accurate modelling for the design of plasma-based accelerators. △ Less

Submitted 18 August, 2022; v1 submitted 17 August, 2022; originally announced August 2022.

Comments: 13 pages, 9 figures

The Gaia-ESO Public Spectroscopic Survey: Motivation, implementation, GIRAFFE data processing, analysis, and final data products

Authors: G. Gilmore, S. Randich, C. C. Worley, A. Hourihane, A. Gonneau, G. G. Sacco, J. R. Lewis, L. Magrini, P. Francois, R. D. Jeffries, S. E. Koposov, A. Bragaglia, E. J. Alfaro, C. Allende Prieto, R. Blomme, A. J. Korn, A. C. Lanzafame, E. Pancino, A. Recio-Blanco, R. Smiljanic, S. Van Eck, T. Zwitter, T. Bensby, E. Flaccomio, M. J. Irwin , et al. (143 additional authors not shown)

Abstract: The Gaia-ESO Public Spectroscopic Survey is an ambitious project designed to obtain astrophysical parameters and elemental abundances for 100,000 stars, including large representative samples of the stellar populations in the Galaxy, and a well-defined sample of 60 (plus 20 archive) open clusters. We provide internally consistent results calibrated on benchmark stars and star clusters, extending a… ▽ More The Gaia-ESO Public Spectroscopic Survey is an ambitious project designed to obtain astrophysical parameters and elemental abundances for 100,000 stars, including large representative samples of the stellar populations in the Galaxy, and a well-defined sample of 60 (plus 20 archive) open clusters. We provide internally consistent results calibrated on benchmark stars and star clusters, extending across a very wide range of abundances and ages. This provides a legacy data set of intrinsic value, and equally a large wide-ranging dataset that is of value for homogenisation of other and future stellar surveys and Gaia's astrophysical parameters. This article provides an overview of the survey methodology, the scientific aims, and the implementation, including a description of the data processing for the GIRAFFE spectra. A companion paper (arXiv:2206.02901) introduces the survey results. Gaia-ESO aspires to quantify both random and systematic contributions to measurement uncertainties. Thus all available spectroscopic analysis techniques are utilised, each spectrum being analysed by up to several different analysis pipelines, with considerable effort being made to homogenise and calibrate the resulting parameters. We describe here the sequence of activities up to delivery of processed data products to the ESO Science Archive Facility for open use. The Gaia-ESO Survey obtained 202,000 spectra of 115,000 stars using 340 allocated VLT nights between December 2011 and January 2018 from GIRAFFE and UVES. The full consistently reduced final data set of spectra was released through the ESO Science Archive Facility in late 2020, with the full astrophysical parameters sets following in 2022. △ Less

Submitted 10 August, 2022; originally announced August 2022.

Comments: 38 pages. A&A in press

Journal ref: A&A 666, A120 (2022)

Neutrinoless Double Beta Decay from Lattice QCD: The Short-Distance $π^-\rightarrowπ^+ e^- e^-$ Amplitude

Authors: William Detmold, William I. Jay, David J. Murphy, Patrick R. Oare, Phiala E. Shanahan

Abstract: This work presents a determination of potential short-distance contributions to the unphysical $π^-\rightarrowπ^+ e^- e^-$ decay through lattice QCD calculations. The hadronic contributions to the transition amplitude are described by the pion matrix elements of five Standard Model Effective Field Theory operators, which are computed on five ensembles of domain-wall fermions with $N_f = 2 + 1$ qua… ▽ More This work presents a determination of potential short-distance contributions to the unphysical $π^-\rightarrowπ^+ e^- e^-$ decay through lattice QCD calculations. The hadronic contributions to the transition amplitude are described by the pion matrix elements of five Standard Model Effective Field Theory operators, which are computed on five ensembles of domain-wall fermions with $N_f = 2 + 1$ quark flavors with a range of heavier-than-physical values of the light quark masses. The matrix elements are extrapolated to the continuum, physical light-quark mass, and infinite volume limit using a functional form derived in chiral Effective Field Theory ($χ\mathrm{EFT}$). This extrapolation also yields the relevant low-energy constants of $χ\mathrm{EFT}$, which are necessary input for $χ\mathrm{EFT}$ calculations of neutrinoless double beta decay of nuclei. △ Less

Submitted 15 December, 2022; v1 submitted 10 August, 2022; originally announced August 2022.

Comments: 24 pages, 17 figures

Report number: MIT-CTP/5414

VST ATLAS Galaxy Cluster Catalogue I: cluster detection and mass calibration

Authors: B. Ansarinejad, D. N. A. Murphy, T. Shanks, N. Metcalfe

Abstract: Taking advantage of $\sim4700$ deg$^2$ optical coverage of the Southern sky offered by the VST ATLAS survey, we construct a new catalogue of photometrically selected galaxy groups and clusters using the {\sc orca} cluster detection algorithm. The catalogue contains $\sim 22,000$ detections with $N_{200}>10$ and $\sim9,000$ with $N_{200}>20$. We estimate the photometric redshifts of the clusters us… ▽ More Taking advantage of $\sim4700$ deg$^2$ optical coverage of the Southern sky offered by the VST ATLAS survey, we construct a new catalogue of photometrically selected galaxy groups and clusters using the {\sc orca} cluster detection algorithm. The catalogue contains $\sim 22,000$ detections with $N_{200}>10$ and $\sim9,000$ with $N_{200}>20$. We estimate the photometric redshifts of the clusters using machine learning and find the redshift distribution of the sample to extend to $z\sim0.7$, peaking at $z\sim0.25$. We calibrate the ATLAS cluster mass-richness scaling relation using masses from the MCXC, Planck, ACT DR5 and SDSS redMaPPer cluster samples. We estimate the ATLAS sample to be $>95\%$ complete and $>85\%$ pure at $z<0.35$ and in the $M_{\rm 200m}$>$1\times10^{14}h^{-1}{\rm M}_\odot$ mass range. At $z<0.35$, we also find the ATLAS sample to be more complete than redMaPPer, recovering a $\sim40\%$ higher fraction of Abell clusters. This higher sample completeness places the amplitude of the $z<0.35$ ATLAS cluster mass function closer to the predictions of a $Λ$CDM model with parameters based on the Planck CMB analyses, compared to the mass functions of the other cluster samples. However, strong tensions between the observed ATLAS mass functions and models remain. We shall present a detailed cosmological analysis of the ATLAS cluster mass functions in paper II. In the future, optical counterparts to X-ray-detected eROSITA clusters can be identified using the ATLAS sample. The catalogue is also well suited for auxiliary spectroscopic target selection in 4MOST. The ATLAS cluster catalogue is publicly available at http://astro.dur.ac.uk/cosmology/vstatlas/cluster_catalogue/. △ Less

Submitted 15 December, 2022; v1 submitted 8 July, 2022; originally announced July 2022.

Comments: 21 pages, 17 figures. v2 contains moderate revisions in response to the MNRAS referee report. In addition, cluster galaxy magnitudes have now been added to the updated catalogue. The updated manuscript has been re-submitted to MNRAS

The Grothendieck Groups of Discrete Cluster Categories of Dynkin Type $A_{\infty}$

Authors: Dave Murphy

Abstract: In this work we compute the triangulated Grothendieck groups for each of the family of discrete cluster categories of Dynkin type $A_{\infty}$ as introduced by Holm-Jorgensen. Subsequently, we also compute the Grothendieck group of a completion of these discrete cluster categories in the sense of Paquette-Yildirim. In this work we compute the triangulated Grothendieck groups for each of the family of discrete cluster categories of Dynkin type $A_{\infty}$ as introduced by Holm-Jorgensen. Subsequently, we also compute the Grothendieck group of a completion of these discrete cluster categories in the sense of Paquette-Yildirim. △ Less

Submitted 7 October, 2022; v1 submitted 8 June, 2022; originally announced June 2022.

Comments: V2: 18 pages, updated some figures, restated Theorem 4.4, comments welcome!

The Gaia-ESO Public Spectroscopic Survey: Implementation, data products, open cluster survey, science, and legacy

Authors: S. Randich, G. Gilmore, L. Magrini, G. G. Sacco, R. J. Jackson, R. D. Jeffries, C. C. Worley, A. Hourihane, A. Gonneau, C. Viscasillas Vàzquez, E. Franciosini, J. R. Lewis, E. J. Alfaro, C. Allende Prieto, T. Bensby R. Blomme, A. Bragaglia, E. Flaccomio, P. François, M. J. Irwin, S. E. Koposov, A. J. Korn, A. C. Lanzafame, E. Pancino, A. Recio-Blanco, R. Smiljanic , et al. (139 additional authors not shown)

Abstract: In the last 15 years different ground-based spectroscopic surveys have been started (and completed) with the general aim of delivering stellar parameters and elemental abundances for large samples of Galactic stars, complementing Gaia astrometry. Among those surveys, the Gaia-ESO Public Spectroscopic Survey (GES), the only one performed on a 8m class telescope, was designed to target 100,000 stars… ▽ More In the last 15 years different ground-based spectroscopic surveys have been started (and completed) with the general aim of delivering stellar parameters and elemental abundances for large samples of Galactic stars, complementing Gaia astrometry. Among those surveys, the Gaia-ESO Public Spectroscopic Survey (GES), the only one performed on a 8m class telescope, was designed to target 100,000 stars using FLAMES on the ESO VLT (both Giraffe and UVES spectrographs), covering all the Milky Way populations, with a special focus on open star clusters. This article provides an overview of the survey implementation (observations, data quality, analysis and its success, data products, and releases), of the open cluster survey, of the science results and potential, and of the survey legacy. A companion article (Gilmore et al.) reviews the overall survey motivation, strategy, Giraffe pipeline data reduction, organisation, and workflow. The GES has determined homogeneous good-quality radial velocities and stellar parameters for a large fraction of its more than 110,000 unique target stars. Elemental abundances were derived for up to 31 elements for targets observed with UVES. Lithium abundances are delivered for about 1/3 of the sample. The analysis and homogenisation strategies have proven to be successful; several science topics have been addressed by the Gaia-ESO consortium and the community, with many highlight results achieved. The final catalogue has been released through the ESO archive at the end of May 2022, including the complete set of advanced data products. In addition to these results, the Gaia-ESO Survey will leave a very important legacy, for several aspects and for many years to come. △ Less

Submitted 6 June, 2022; originally announced June 2022.

Comments: Accepted for publication in Astronomy and Astrophysics. 30 pages, 30 figures, 4 tables

A compact instrument for gamma-ray burst detection on a CubeSat platform II: Detailed design, assembly and validation

Authors: David Murphy, Alexey Ulyanov, Sheila McBreen, Joseph Mangan, Rachel Dunwoody, Maeve Doyle, Conor O'Toole, Joseph Thompson, Jack Reilly, Sarah Walsh, Brian Shortt, Antonio Martin-Carrillo, Lorraine Hanlon

Abstract: The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. T… ▽ More The Gamma-ray Module, GMOD, is a miniaturised novel gamma-ray detector which will be the primary scientific payload on the Educational Irish Research Satellite (EIRSAT-1) 2U CubeSat mission. GMOD comprises a compact (25mm $\times$ 25mm $\times$ 40mm) cerium bromide scintillator coupled to a tiled array of 4$\times$4 silicon photomultipliers, with front-end readout provided by the IDE3380 SIPHRA. This paper presents the detailed GMOD design and the accommodation of the instrument within the restrictive CubeSat form factor. The electronic and mechanical interfaces are compatible with many off-the-shelf CubeSat systems and structures. The energy response of the GMOD engineering qualification model has been determined using radioactive sources, and an energy resolution of 5.4% at 662keV has been measured. EIRSAT-1 will perform on-board processing of GMOD data. Trigger results, including light-curves and spectra, will be incorporated into the spacecraft beacon and transmitted continuously. Inexpensive hardware can be used to decode the beacon signal, making the data accessible to a wide community. GMOD will have scientific capability for the detection of gamma-ray bursts, in addition to the educational and technology demonstration goals of the EIRSAT-1 mission. The detailed design and measurements to date demonstrate the capability of GMOD in low Earth orbit, the scalability of the design for larger CubeSats and as an element of future large gamma-ray missions. △ Less

Submitted 7 March, 2022; originally announced March 2022.

Comments: 31 pages, 16 figures. This is an author accepted manuscript of an article accepted for publication in Experimental Astronomy. The final open-access version will be available at: https://doi.org/10.1007/s10686-022-09842-z

Effect of an External Electric Field on the Propagation Velocity of Premixed Flames

Authors: Mario Sanchez Sanz, Daniel C. Murphy, C. Fernandez Pello

Abstract: There have been many experimental investigations into the ability of electric fields to enhance combustion by acting upon ion species present in flames [1]. In this work, we examine this phenomenon using a one-dimensional model of a lean premixed flame under the influence of a longitudinal electric field. We expand upon prior two-step chain-branching reaction laminar models with reactions to model… ▽ More There have been many experimental investigations into the ability of electric fields to enhance combustion by acting upon ion species present in flames [1]. In this work, we examine this phenomenon using a one-dimensional model of a lean premixed flame under the influence of a longitudinal electric field. We expand upon prior two-step chain-branching reaction laminar models with reactions to model the creation and consumption of both a positively-charged radical species and free electrons. Also included are the electromotive force in the conservation equation for ion species and the electrostatic form of the Maxwell equations in order to resolve ion transport by externally applied and internally induced electric fields. The numerical solution of these equations allows us to compute changes in flame speed due to electric fields. Further, the variation of key kinetic and transport parameters modifies the electrical sensitivity of the flame. From changes in flame speed and reactant profiles we are able to gain novel, valuable insight into how and why combustion can be controlled by electric fields. △ Less

Submitted 8 February, 2022; originally announced February 2022.

Evaluation of data imputation strategies in complex, deeply-phenotyped data sets: the case of the EU-AIMS Longitudinal European Autism Project

Authors: A. Llera, M. Brammer, B. Oakley, J. Tillmann, M. Zabihi, T. Mei, T. Charman, C. Ecker, F. Dell Acqua, T. Banaschewski, C. Moessnang, S. Baron-Cohen, R. Holt, S. Durston, D. Murphy, E. Loth, J. K. Buitelaar, D. L. Floris, C. F. Beckmann

Abstract: An increasing number of large-scale multi-modal research initiatives has been conducted in the typically develo** population, as well as in psychiatric cohorts. Missing data is a common problem in such datasets due to the difficulty of assessing multiple measures on a large number of participants. The consequences of missing data accumulate when researchers aim to explore relationships between m… ▽ More An increasing number of large-scale multi-modal research initiatives has been conducted in the typically develo** population, as well as in psychiatric cohorts. Missing data is a common problem in such datasets due to the difficulty of assessing multiple measures on a large number of participants. The consequences of missing data accumulate when researchers aim to explore relationships between multiple measures. Here we aim to evaluate different imputation strategies to fill in missing values in clinical data from a large (total N=764) and deeply characterised (i.e. range of clinical and cognitive instruments administered) sample of N=453 autistic individuals and N=311 control individuals recruited as part of the EU-AIMS Longitudinal European Autism Project (LEAP) consortium. In particular we consider a total of 160 clinical measures divided in 15 overlap** subsets of participants. We use two simple but common univariate strategies, mean and median imputation, as well as a Round Robin regression approach involving four independent multivariate regression models including a linear model, Bayesian Ridge regression, as well as several non-linear models, Decision Trees, Extra Trees and K-Neighbours regression. We evaluate the models using the traditional mean square error towards removed available data, and consider in addition the KL divergence between the observed and the imputed distributions. We show that all of the multivariate approaches tested provide a substantial improvement compared to typical univariate approaches. Further, our analyses reveal that across all 15 data-subsets tested, an Extra Trees regression approach provided the best global results. This allows the selection of a unique model to impute missing data for the LEAP project and deliver a fixed set of imputed clinical data to be used by researchers working with the LEAP dataset in the future. △ Less

Submitted 20 January, 2022; originally announced January 2022.

Comments: 22 pages, 3 figures, 3 tables

Absolute keV X-ray yield and conversion efficiency in over dense Si petawatt laser plasma

Authors: Sergey N. Ryazantsev, Artem S. Martynenko, Maksim V. Sedov, Igor Yu. Skobelev, Mikhail D. Mishchenko, Yaroslav S. Lavrinenko, Christopher D. Baird, Nicola Booth, Phil Durey, Leonard N. K. DÖhl, Damon Farley, Kathryn L. Lancaster, Paul Mckenna, Christopher D. Murphy, Tatiana A. Pikuz, Christopher Spindloe, Nigel Woolsey, Sergey A. Pikuz

Abstract: Laser-produced plasmas are bright, short sources of X-rays often used for time-resolved imaging and spectroscopy. Absolute measurement requires accurate knowledge of laser-to-x-ray conversion efficiencies, spectrum, photon yield and angular distribution. Here we report on soft X-ray emission from a thin Si foil irradiated by a sub-PW picosecond laser pulse. These absolute measurements cover a cont… ▽ More Laser-produced plasmas are bright, short sources of X-rays often used for time-resolved imaging and spectroscopy. Absolute measurement requires accurate knowledge of laser-to-x-ray conversion efficiencies, spectrum, photon yield and angular distribution. Here we report on soft X-ray emission from a thin Si foil irradiated by a sub-PW picosecond laser pulse. These absolute measurements cover a continuous and broad spectral range that extends from 4.75 to 7.5 Angstroms (1.7-2.6 keV). The X-ray spectrum consists of spectral line transitions from highly charged ions and broadband emission with contributions from recombination, and free-free processes that occur as electrons decelerate in plasma electromagnetic fields. These quantitative measurements are compared to particle-in-cell simulations allowing us to distinguish bremsstrahlung and synchrotron contributions to the free-free emission. We found that experiment and simulation estimations of laser-to-bremsstrahlung conversion efficiency are in a good agreement. This agreement illustrates the accuracy of experiment and physical interpretation of the measurements. △ Less

Submitted 20 December, 2021; originally announced December 2021.

Analysis of an adaptive lead weighted ResNet for multiclass classification of 12-lead ECGs

Authors: Zhibin Zhao, Darcy Murphy, Hugh Gifford, Stefan Williams, Annie Darlington, Samuel D. Relton, Hui Fang, David C. Wong

Abstract: Background: Twelve lead ECGs are a core diagnostic tool for cardiovascular diseases. Here, we describe and analyse an ensemble deep neural network architecture to classify 24 cardiac abnormalities from 12-lead ECGs. Method: We proposed a squeeze and excite ResNet to automatically learn deep features from 12-lead ECGs, in order to identify 24 cardiac conditions. The deep features were augmented w… ▽ More Background: Twelve lead ECGs are a core diagnostic tool for cardiovascular diseases. Here, we describe and analyse an ensemble deep neural network architecture to classify 24 cardiac abnormalities from 12-lead ECGs. Method: We proposed a squeeze and excite ResNet to automatically learn deep features from 12-lead ECGs, in order to identify 24 cardiac conditions. The deep features were augmented with age and gender features in the final fully connected layers. Output thresholds for each class were set using a constrained grid search. To determine why the model made incorrect predictions, two expert clinicians independently interpreted a random set of 100 misclassified ECGs concerning Left Axis Deviation. Results: Using the bespoke weighted accuracy metric, we achieved a 5-fold cross validation score of 0.684, and sensitivity and specificity of 0.758 and 0.969, respectively. We scored 0.520 on the full test data, and ranked 2nd out of 41 in the official challenge rankings. On a random set of misclassified ECGs, agreement between two clinicians and training labels was poor (clinician 1: kappa = -0.057, clinician 2: kappa = -0.159). In contrast, agreement between the clinicians was very high (kappa = 0.92). Discussion: The proposed prediction model performed well on the validation and hidden test data in comparison to models trained on the same data. We also discovered considerable inconsistency in training labels, which is likely to hinder development of more accurate models. △ Less

Submitted 1 December, 2021; originally announced December 2021.

Comments: 13 pages, 4 Figure, 4 Tables. To be submitted to Physiological Measurement (special issue for Physionet Challenge)

MSC Class: 68T07 ACM Class: J.3; I.2

Embedded Firmware Development for a Novel CubeSat Gamma-Ray Detector

Authors: Joseph Mangan, David Murphy, Rachel Dunwoody, Maeve Doyle, Alexey Ulyanov, Lorraine Hanlon, Brian Shortt, Sheila McBreen, Masoud Emam, Jessica Erkal, Joe Flanagan, Gianluca Fontanesi, Andrew Gloster, Conor O'Toole, Favour Okosun, Rakhi RajagopalanNair, Jack Reilly, Lána Salmon, Daire Sherwin, Joseph Thompson, Sarah Walsh, Daithí de Faoite, Mike Hibbett, Umair Javaid, Fergal Marshall , et al. (4 additional authors not shown)

Abstract: The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the M… ▽ More The Gamma-ray Module (GMOD) is an experiment designed for the detection of gamma-ray bursts in low Earth orbit as the principal scientific payload on a 2-U CubeSat, EIRSAT-1. GMOD comprises a cerium bromide scintillator coupled to silicon photomultipliers which are processed and digitised by a bespoke ASIC. Custom firmware on the GMOD motherboard has been designed, implemented and tested for the MSP430 microprocessor which manages the experiment including readout, storage and configuration of the system. The firmware has been verified in a series of experiments testing the response over a realistic range of input detector trigger frequencies from 50Hz to 1kHz for the primary time tagged event (TTE) data. The power consumption and ability of the firmware to successfully receive and transmit the packets to the on-board computer was investigated. The experiment demonstrated less than 1% loss of packets up to 1kHz for the standard transfer mode with the power not exceeding 31mW. The transfer performance and power consumption demonstrated are within the required range of this CubeSat instrument. △ Less

Submitted 4 November, 2021; originally announced November 2021.

Comments: 9 pages, 5 figures. This paper was presented at the 8th IEEE International Conference on Space Mission Challenges for Information Technology, July 26-30, 2021, and will appear in the conference proceedings. This work has been submitted to the IEEE for publication. Copyright may be transferred without notice, after which this version may no longer be accessible

A compact instrument for gamma-ray burst detection on a CubeSat platform I: Design drivers and expected performance

Authors: David Murphy, Alexey Ulyanov, Sheila McBreen, Maeve Doyle, Rachel Dunwoody, Joseph Mangan, Joseph Thompson, Brian Shortt, Antonio Martin-Carrillo, Lorraine Hanlon

Abstract: The Educational Irish Research Satellite 1 (EIRSAT-1) is a 2U CubeSat being developed under ESA's Fly Your Satellite! programme. The project has many aspects, which are primarily educational, but also include space qualification of new detector technologies for gamma-ray astronomy and the detection of gamma-ray bursts (GRBs). The Gamma-ray Module (GMOD), the main mission payload, is a small gamma-… ▽ More The Educational Irish Research Satellite 1 (EIRSAT-1) is a 2U CubeSat being developed under ESA's Fly Your Satellite! programme. The project has many aspects, which are primarily educational, but also include space qualification of new detector technologies for gamma-ray astronomy and the detection of gamma-ray bursts (GRBs). The Gamma-ray Module (GMOD), the main mission payload, is a small gamma-ray spectrometer comprising a 25 mm $\times$ 25 mm $\times$ 40 mm cerium bromide scintillator coupled to an array of 16 silicon photomultipliers. The readout is provided by IDE3380 (SIPHRA), a low-power and radiation tolerant readout ASIC. GMOD will detect gamma-rays and measure their energies in a range from tens of keV to a few MeV. Monte Carlo simulations were performed using the Medium Energy Gamma-ray Astronomy Library to evaluate GMOD's capability for the detection of GRBs in low Earth orbit. The simulations used a detailed mass model of the full spacecraft derived from a very high-fidelity 3D CAD model. The sky-average effective area of GMOD on board EIRSAT-1 was found to be 10 cm$^2$ at 120 keV. The instrument is expected to detect between 11 and 14 GRBs, at a significance greater than 10$σ$ (and up to 32 at 5$σ$), during a nominal one-year mission. The shape of the scintillator in GMOD results in omni-directional sensitivity which allows for a nearly all-sky field of view. △ Less

Submitted 18 August, 2021; originally announced August 2021.

Comments: 27 pages, 13 figures. This is an author accepted manuscript of an article published in Experimental Astronomy. The final open-access version is available at: https://doi.org/10.1007/s10686-021-09779-9

The nature of sub-millimetre galaxies II: an ALMA comparison of SMG dust heating mechanisms

Authors: B. Ansarinejad, T. Shanks, R. M. Bielby, N. Metcalfe, L. Infante, D. N. A. Murphy, D. J. Rosario, S. M. Stach

Abstract: We compare the contribution of Active Galactic Nuclei (AGN) and star-formation towards dust heating in sub-mm galaxies (SMGs). We have used ALMA at $0."1$ resolution to image a complete flux-limited sample of seven sub-mm sources previously shown to have spectral energy distributions (SEDs) that were as well-fitted by obscured AGN as star-forming galaxy templates. Indeed, two sub-mm sources were k… ▽ More We compare the contribution of Active Galactic Nuclei (AGN) and star-formation towards dust heating in sub-mm galaxies (SMGs). We have used ALMA at $0."1$ resolution to image a complete flux-limited sample of seven sub-mm sources previously shown to have spectral energy distributions (SEDs) that were as well-fitted by obscured AGN as star-forming galaxy templates. Indeed, two sub-mm sources were known to be quasars from their absorbed X-ray emission. We find the sub-mm sizes of all SMGs to be small ($\approx1-2$kpc) and generally $\sim3$ times smaller than any host detected in the Near-Infra-Red (NIR). In all cases, the five SMGs are comparable in sub-mm size to the two known quasars and four $z\approx6$ quasars, also observed with ALMA. We detect no evidence of diffuse spiral arms in this complete sample. We then convert the Far-Infra-Red (FIR) luminosities to star-formation rate (SFR) surface densities and find that the SMGs occupy the same range as the known quasars in our sample. We conclude that in terms of sub-mm size, extent relative to host and SFR density as well as luminosity and Mid-IR (MIR) colour, there is little distinction between the SMGs and sub-mm bright quasars. Finally, we present preliminary evidence that SMGs with higher MIR luminosities and sub-mm loud quasars tend to have dust components that range to hotter temperatures than their less luminous SMG counterparts. In light of these results, we continue to suggest that luminous SMGs may host dust-absorbed quasars that may simultaneously dominate the FIR and hard X-ray backgrounds. △ Less

Submitted 3 January, 2022; v1 submitted 1 July, 2021; originally announced July 2021.

Comments: 16 pages, 7 figures. Accepted for publication in MNRAS

A laser-plasma platform for photon-photon physics

Authors: B. Kettle, D. Hollatz, E. Gerstmayr, G. M. Samarin, A. Alejo, S. Astbury, C. Baird, S. Bohlen, M. Campbell, C. Colgan, D. Dannheim, C. Gregory, H. Harsh, P. Hatfield, J. Hinojosa, Y. Katzir, J. Morton, C. D. Murphy, A. Nurnberg, J. Osterhoff, G. Pérez-Callejo, K. Poder, P. P. Rajeev, C. Roedel, F. Roeder , et al. (13 additional authors not shown)

Abstract: We describe a laser-plasma platform for photon-photon collision experiments to measure fundamental quantum electrodynamic processes such as the linear Breit-Wheeler process with real photons. The platform has been developed using the Gemini laser facility at the Rutherford Appleton Laboratory. A laser wakefield accelerator and a bremsstrahlung convertor are used to generate a collimated beam of ph… ▽ More We describe a laser-plasma platform for photon-photon collision experiments to measure fundamental quantum electrodynamic processes such as the linear Breit-Wheeler process with real photons. The platform has been developed using the Gemini laser facility at the Rutherford Appleton Laboratory. A laser wakefield accelerator and a bremsstrahlung convertor are used to generate a collimated beam of photons with energies of hundreds of MeV, that collide with keV x-ray photons generated by a laser heated plasma target. To detect the pairs generated by the photon-photon collisions, a magnetic transport system has been developed which directs the pairs onto scintillation-based and hybrid silicon pixel single particle detectors. We present commissioning results from an experimental campaign using this laser-plasma platform for photon-photon physics, demonstrating successful generation of both photon sources, characterisation of the magnetic transport system and calibration of the single particle detectors, and discuss the feasibility of this platform for the observation of the Breit-Wheeler process. The design of the platform will also serve as the basis for the investigation of strong-field quantum electrodynamic processes such as the nonlinear Breit-Wheeler and the Trident process, or eventually, photon-photon scattering. △ Less

Submitted 5 July, 2021; v1 submitted 29 June, 2021; originally announced June 2021.

Comments: 28 pages, 14 figures

Journal ref: New Journal of Physics, 23 (2021) 115006

Lattice determination of $I= 0$ and 2 $ππ$ scattering phase shifts with a physical pion mass

Authors: T. Blum, P. A. Boyle, M. Bruno, N. H. Christ, D. Hoying, C. Kelly, C. Lehner, R. D. Mawhinney, A. S. Meyer, D. J. Murphy, C. T. Sachrajda, A. Soni, T. Wang

Abstract: Phase shifts for $s$-wave $ππ$ scattering in both the $I=0$ and $I=2$ channels are determined from a lattice QCD calculation performed on 741 gauge configurations obeying G-parity boundary conditions with a physical pion mass and lattice size of $32^3\times 64$. These results support our recent study of direct CP violation in $K\toππ$ decay \cite{Abbott:2020hxn}, improving our earlier 2015 calcula… ▽ More Phase shifts for $s$-wave $ππ$ scattering in both the $I=0$ and $I=2$ channels are determined from a lattice QCD calculation performed on 741 gauge configurations obeying G-parity boundary conditions with a physical pion mass and lattice size of $32^3\times 64$. These results support our recent study of direct CP violation in $K\toππ$ decay \cite{Abbott:2020hxn}, improving our earlier 2015 calculation \cite{Bai:2015nea}. The phase shifts are determined for both stationary and moving $ππ$ systems, at three ($I=0$) and four ($I=2$) different total momenta. We implement several $ππ$ interpolating operators including a scalar bilinear "$σ$" operator and paired single-pion bilinear operators with the constituent pions carrying various relative momenta. Several techniques, including correlated fitting and a bootstrap determination of p-values have been used to refine the results and a comparison with the generalized eigenvalue problem (GEVP) method is given. A detailed systematic error analysis is performed which allows phase shift results to be presented at a fixed energy. △ Less

Submitted 19 March, 2022; v1 submitted 28 March, 2021; originally announced March 2021.

Comments: v3: Add a subsection "Higher partial wave correction", and correct the unit of scattering length. 88 pages and 14 figures v2: 1). Add reference 29 as an example of pipi scattering calculation above 4mpi threshold. 2). Modify the wording on page 3 for the footage. 3). Correct the σoperator on page 17

Report number: CERN-TH-2021-039

QUBIC IV: Performance of TES Bolometers and Readout Electronics

Authors: M. Piat, G. Stankowiak, E. S. Battistelli, P. de Bernardis, G. D Alessandro, M. De Petris, L. Grandsire, J. -Ch. Hamilton, T. D. Hoang, S. Marnieros, S. Masi, A. Mennella, L. Mousset, C. O Sullivan, D. Prele, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade, J. G. Alberro, A. Almela, G. Amico, L. H. Arnaldi , et al. (104 additional authors not shown)

Abstract: A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are… ▽ More A prototype version of the Q & U bolometric interferometer for cosmology (QUBIC) underwent a campaign of testing in the laboratory at Astroparticle Physics and Cosmology laboratory in Paris (APC). The detection chain is currently made of 256 NbSi transition edge sensors (TES) cooled to 320 mK. The readout system is a 128:1 time domain multiplexing scheme based on 128 SQUIDs cooled at 1 K that are controlled and amplified by an SiGe application specific integrated circuit at 40 K. We report the performance of this readout chain and the characterization of the TES. The readout system has been functionally tested and characterized in the lab and in QUBIC. The low noise amplifier demonstrated a white noise level of 0.3 nV.Hz^-0.5. Characterizations of the QUBIC detectors and readout electronics includes the measurement of I-V curves, time constant and the noise equivalent power. The QUBIC TES bolometer array has approximately 80% detectors within operational parameters. It demonstrated a thermal decoupling compatible with a phonon noise of about 5.10^-17 W.Hz^-0.5 at 410 mK critical temperature. While still limited by microphonics from the pulse tubes and noise aliasing from readout system, the instrument noise equivalent power is about 2.10^-16 W.Hz^-0.5, enough for the demonstration of bolometric interferometry. △ Less

Submitted 20 October, 2021; v1 submitted 17 January, 2021; originally announced January 2021.

Comments: Accepted for publication in JCAP

The effect of price-based demand response on carbon emissions in European electricity markets: The importance of adequate carbon prices

Authors: Markus Fleschutz, Markus Bohlayer, Marco Braun, Gregor Henze, Michael D. Murphy

Abstract: Price-based demand response (PBDR) has recently been attributed great economic but also environmental potential. However, the determination of its short-term effects on carbon emissions requires the knowledge of marginal emission factors (MEFs), which compared to grid mix emission factors (XEFs), are cumbersome to calculate due to the complex characteristics of national electricity markets. This s… ▽ More Price-based demand response (PBDR) has recently been attributed great economic but also environmental potential. However, the determination of its short-term effects on carbon emissions requires the knowledge of marginal emission factors (MEFs), which compared to grid mix emission factors (XEFs), are cumbersome to calculate due to the complex characteristics of national electricity markets. This study, therefore, proposes two merit order-based methods to approximate hourly MEFs and applies it to readily available datasets from 20 European countries for the years 2017-2019. Based on the resulting electricity prices, MEFs, and XEFs, standardized daily load shifts were simulated to quantify their effects on marginal costs and carbon emissions. Finally, by repeating the load shift simulations for different carbon price levels, the impact of the carbon price on the resulting carbon emissions was analyzed. Interestingly, the simulated price-based load shifts led to increases in operational carbon emissions for 8 of the 20 countries and to an average increase of 2.1% across all 20 countries. Switching from price-based to MEF-based load shifts reduced the corresponding carbon emissions to a decrease of 35%, albeit with 56% lower monetary cost savings compared to the price-based load shifts. Under specific circumstances, PBDR leads to an increase in carbon emissions, mainly due to the economic advantage fuel sources such as lignite and coal have in the merit order. However, as the price of carbon is increased, the correlation between the carbon intensity and the marginal cost of the fuels substantially increases. Therefore, with adequate carbon prices, PBDR can be an effective tool for both economical and environmental improvement. △ Less

Submitted 1 December, 2020; originally announced December 2020.

QUBIC I: Overview and ScienceProgram

Authors: J. -Ch. Hamilton, L. Mousset, E. S. Battistelli, M. -A. Bigot-Sazy, P. Chanial, R. Charlassier, G. D'Alessandro, P. de Bernardis, M. De Petris, M. M. Gamboa Lerena, L. Grandsire, S. Lau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Riccardi, C. Scóccola, M. Stolpovskiy, A. Tartari, S. A. Torchinsky, F. Voisin, M. Zannoni, P. Ade , et al. (105 additional authors not shown)

Abstract: The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical fo… ▽ More The Q $\&$ U Bolometric Interferometer for Cosmology (QUBIC) is a novel kind of polarimeter optimized for the measurement of the B-mode polarization of the Cosmic Microwave Background (CMB), which is one of the major challenges of observational cosmology. The signal is expected to be of the order of a few tens of nK, prone to instrumental systematic effects and polluted by various astrophysical foregrounds which can only be controlled through multichroic observations. QUBIC is designed to address these observational issues with a novel approach that combines the advantages of interferometry in terms of control of instrumental systematic effects with those of bolometric detectors in terms of wide-band, background-limited sensitivity. The QUBIC synthesized beam has a frequency-dependent shape that results in the ability to produce maps of the CMB polarization in multiple sub-bands within the two physical bands of the instrument (150 and 220 GHz). These features make QUBIC complementary to other instruments and makes it particularly well suited to characterize and remove Galactic foreground contamination. In this article, first of a series of eight, we give an overview of the QUBIC instrument design, the main results of the calibration campaign, and present the scientific program of QUBIC including not only the measurement of primordial B-modes, but also the measurement of Galactic foregrounds. We give forecasts for typical observations and measurements: with three years of integration on the sky and assuming perfect foreground removal as well as stable atmospheric conditions from our site in Argentina, our simulations show that we can achieve a statistical sensitivity to the effective tensor-to-scalar ratio (including primordial and foreground B-modes) $σ(r)=0.015$. △ Less

Submitted 26 August, 2021; v1 submitted 4 November, 2020; originally announced November 2020.

Comments: 34 pages, 16 figures, accepted for publication by JCAP. Overview paper for a series of 8 QUBIC articles special JCAP edition dedicated to QUBIC

QUBIC II: Spectro-Polarimetry with Bolometric Interferometry

Authors: L. Mousset, M. M. Gamboa Lerena, E. S. Battistelli, P. de Bernardis, P. Chanial, G. D'Alessandro, G. Dashyan, M. De Petris, L. Grandsire, J. -Ch. Hamilton, F. Incardona, S. Landau, S. Marnieros, S. Masi, A. Mennella, C. O'Sullivan, M. Piat, G. Ricciardi, C. G. Scóccola, M. Stolpovskiy, A. Tartari, J. -P. Thermeau, S. A. Torchinsky, F. Voisin, M. Zannoni , et al. (106 additional authors not shown)

Abstract: Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foreg… ▽ More Bolometric interferometry is a novel technique that has the ability to perform spectral imaging. A bolometric interferometer observes the sky in a wide frequency band and can reconstruct sky maps in several sub-bands within the physical band in post-processing of the data. This provides a powerful spectral method to discriminate between the cosmic microwave background (CMB) and astrophysical foregrounds. In this paper, the methodology is illustrated with examples based on the Q \& U Bolometric Interferometer for Cosmology (QUBIC) which is a ground-based instrument designed to measure the B-mode polarization of the sky at millimeter wavelengths. We consider the specific cases of point source reconstruction and Galactic dust map** and we characterize the point spread function as a function of frequency. We study the noise properties of spectral imaging, especially the correlations between sub-bands, using end-to-end simulations together with a fast noise simulator. We conclude showing that spectral imaging performance are nearly optimal up to five sub-bands in the case of QUBIC. △ Less

Submitted 28 March, 2022; v1 submitted 28 October, 2020; originally announced October 2020.

Comments: 27 pages, 18 figures. Accepted by JCAP on July 6, 2021. Second paper of series of 8 in a special JCAP edition on QUBIC

A Qualitative Analysis of Haptic Feedback in Music Focused Exercises

Authors: Gareth W. Young, David Murphy, Jeffrey Weeter

Abstract: We present the findings of a pilot-study that analysed the role of haptic feedback in a musical context. To examine the role of haptics in Digital Musical Instrument (DMI) design an experiment was formulated to measure the users' perception of device usability across four separate feedback stages: fully haptic (force and tactile combined), constant force only, vibrotactile only, and no feedback. T… ▽ More We present the findings of a pilot-study that analysed the role of haptic feedback in a musical context. To examine the role of haptics in Digital Musical Instrument (DMI) design an experiment was formulated to measure the users' perception of device usability across four separate feedback stages: fully haptic (force and tactile combined), constant force only, vibrotactile only, and no feedback. The study was piloted over extended periods with the intention of exploring the application and integration of DMIs in real-world musical contexts. Applying a music orientated analysis of this type enabled the investigative process to not only take place over a comprehensive period, but allowed for the exploration of DMI integration in everyday compositional practices. As with any investigation that involves creativity, it was important that the participants did not feel rushed or restricted. That is, they were given sufficient time to explore and assess the different feedback types without constraint. This provided an accurate and representational set of qualitative data for validating the participants' experience with the different feedback types they were presented with. △ Less

Submitted 23 October, 2020; v1 submitted 22 October, 2020; originally announced October 2020.

Comments: 6 pages

ACM Class: H.5.2; H.5.5; J.5

Journal ref: Proceedings of the International Conference on New Interfaces for Musical Expression, 2017

Assembly, Integration, and Verification Activities for a 2U CubeSat, EIRSAT-1

Authors: Sarah Walsh, David Murphy, Maeve Doyle, Joseph Thompson, Rachel Dunwoody, Masoud Emam, Jessica Erkal, Joe Flanagan, Gianluca Fontanesi, Andrew Gloster, Joe Mangan, Conor O'Toole, Favour Okosun, Rakhi Rajagopalan Nair, Jack Reilly, Lána Salmon, Daire Sherwin, Paul Cahill, Daithí de Faoite, Umair Javaid, Lorraine Hanlon, David McKeown, William O'Connor, Kenneth Stanton, Alexei Ulyanov , et al. (2 additional authors not shown)

Abstract: The Educational Irish Research Satellite, EIRSAT-1, is a project developed by students at University College Dublin that aims to design, build, and launch Ireland's first satellite. EIRSAT-1 is a 2U CubeSat incorporating three novel payloads; GMOD, a gamma-ray detector, EMOD, a thermal coating management experiment, and WBC, a novel attitude control algorithm. The EIRSAT-1 project is carried out w… ▽ More The Educational Irish Research Satellite, EIRSAT-1, is a project developed by students at University College Dublin that aims to design, build, and launch Ireland's first satellite. EIRSAT-1 is a 2U CubeSat incorporating three novel payloads; GMOD, a gamma-ray detector, EMOD, a thermal coating management experiment, and WBC, a novel attitude control algorithm. The EIRSAT-1 project is carried out with the support of the Education Office of the European Space Agency, under the educational Fly your Satellite! programme. The Assembly, Integration and Verification plan for EIRSAT-1 is central to the philosophy and the development of the spacecraft. The model philosophy employed for the project is known as the 'prototype' approach in which two models of the spacecraft are assembled; an Engineering Qualification Model (EQM) and a Flight Model (FM). The payloads, GMOD and EMOD, and the Antenna Deployment Module (ADM) platform element warrant a Development Model in addition to an EQM and a FM, as they have been designed and developed in-house. After successful completion of the Critical Design Review and Ambient Test Readiness Review phases of the project, the EQM of EIRSAT-1 will be assembled and integrated. After assembly and integration of the EQM, the project will begin the ambient test campaign, in which the EQM undergoes ambient functional and mission testing. This work details the preparation and execution of the assembly, integration, and verification activities of EIRSAT-1 EQM. △ Less

Submitted 20 October, 2020; originally announced October 2020.

Comments: Conference paper of the 3rd Symposium on Space Educational Activities (SSEA 2019)

Journal ref: Proceedings of the 3rd Symposium on Space Educational Activities, 2019, pp. 128-132

TupperSats: Thinking Inside the Box for Space Systems Engineering

Authors: David Murphy, Robert Jeffrey, Deirdre Coffey, Morgan Fraser, Sheila McBreen, Lorraine Hanlon

Abstract: As part of University College Dublin's MSc in Space Science & Technology curriculum, student teams, over the course of a single term, design, build, launch (on a meteorological balloon), operate and recover their own payload on a standardised platform. Each 'TupperSat' must be built from, or contained within, a household plastic storage container, It must weigh less than 1kg, be able to determine… ▽ More As part of University College Dublin's MSc in Space Science & Technology curriculum, student teams, over the course of a single term, design, build, launch (on a meteorological balloon), operate and recover their own payload on a standardised platform. Each 'TupperSat' must be built from, or contained within, a household plastic storage container, It must weigh less than 1kg, be able to determine location, altitude, internal and external temperature and air pressure, and be able to broadcast this information using an in-house communications system. Students must also design and build a scientific payload or novel technology demonstration to fly on their TupperSat. Notable examples include an earth observation vegetation sensor, particle sample return, gamma-ray detector, and air-bag landing system. The instructors play the role of customer and launch authority. The students are provided with a number of standard components including a Raspberry Pi single-board computer, a 5000 mAH battery, high-altitude-compatible GPS unit, temperature and pressure sensors and, a small low-power radio transceiver module developed specifically for the course based on the LoRa standard. Teams are given a budget of EUR 100 ($115) to purchase additional materials and to build their payload. The students learn space industry practices by full immersion in a typical space project development cycle. TupperSat design and payload concepts are pitched by the student teams at a Preliminary Design Review; plans are well developed before a Critical Design Review, and the team must pass a Flight Readiness Review before being granted permission to launch. Good project management is crucial in order to meet deadlines and secure a launch at the end of the term. As student participation has grown, the module has been modified to allow for more ambitious and challenging projects which further motivates the students. △ Less

Submitted 7 October, 2020; originally announced October 2020.

Comments: 11 pages, 4 figures, presented at 70th International Astronautical Congress (IAC), Washington D.C., USA, 21-25 October 2019. Paper IAC-19-E1.4.6

HCI Models for Digital Musical Instruments: Methodologies for Rigorous Testing of Digital Musical Instruments

Authors: Gareth W. Young, Dave Murphy

Abstract: Here we present an analysis of literature relating to the evaluation methodologies of Digital Musical Instruments (DMIs) derived from the field of Human-Computer Interaction (HCI). We then apply choice aspects from these existing evaluation models and apply them to an optimized evaluation for assessing new DMIs. Here we present an analysis of literature relating to the evaluation methodologies of Digital Musical Instruments (DMIs) derived from the field of Human-Computer Interaction (HCI). We then apply choice aspects from these existing evaluation models and apply them to an optimized evaluation for assessing new DMIs. △ Less

Submitted 3 October, 2020; originally announced October 2020.

Comments: CMMR 2015

Digital Musical Instrument Analysis: The Haptic Bowl

Authors: Gareth W. Young, Dave Murphy

Abstract: This experiment is a case study that applies a HCI-informed DMI Evaluation Framework. This framework applies existing HCI evaluation methods to the assessment of prototype Digital Musical Instruments (DMIs). The overall study will involve a three-part analysis - a description and categorisation of the device, a functionality evaluation that included an examination of usability and user experience,… ▽ More This experiment is a case study that applies a HCI-informed DMI Evaluation Framework. This framework applies existing HCI evaluation methods to the assessment of prototype Digital Musical Instruments (DMIs). The overall study will involve a three-part analysis - a description and categorisation of the device, a functionality evaluation that included an examination of usability and user experience, and finally an exploration of the device's effectiveness as a digital instrument. Here we present the findings of the first two parts of the framework, outlining the constituent components of the interface and testing the functionality of the device. The final stage of analysis will involve a longitudinal study and will be carried out in order to assess the musical affordances of the device. △ Less

Submitted 3 October, 2020; originally announced October 2020.

Comments: CMMR 2015

Low-energy Scattering and Effective Interactions of Two Baryons at $m_π\sim 450$ MeV from Lattice Quantum Chromodynamics

Authors: Marc Illa, Silas R. Beane, Emmanuel Chang, Zohreh Davoudi, William Detmold, David J. Murphy, Kostas Orginos, Assumpta Parreño, Martin J. Savage, Phiala E. Shanahan, Michael L. Wagman, Frank Winter

Abstract: The interactions between two octet baryons are studied at low energies using lattice QCD (LQCD) with larger-than-physical quark masses corresponding to a pion mass of $m_π\sim 450$ MeV and a kaon mass of $m_{K}\sim 596$ MeV. The two-baryon systems that are analyzed range from strangeness $S=0$ to $S=-4$ and include the spin-singlet and triplet $NN$, $ΣN$ ($I=3/2$), and $ΞΞ$ states, the spin-single… ▽ More The interactions between two octet baryons are studied at low energies using lattice QCD (LQCD) with larger-than-physical quark masses corresponding to a pion mass of $m_π\sim 450$ MeV and a kaon mass of $m_{K}\sim 596$ MeV. The two-baryon systems that are analyzed range from strangeness $S=0$ to $S=-4$ and include the spin-singlet and triplet $NN$, $ΣN$ ($I=3/2$), and $ΞΞ$ states, the spin-singlet $ΣΣ$ ($I=2$) and $ΞΣ$ ($I=3/2$) states, and the spin-triplet $ΞN$ ($I=0$) state. The $s$-wave scattering phase shifts, low-energy scattering parameters, and binding energies when applicable, are extracted using Lüscher's formalism. While the results are consistent with most of the systems being bound at this pion mass, the interactions in the spin-triplet $ΣN$ and $ΞΞ$ channels are found to be repulsive and do not support bound states. Using results from previous studies at a larger pion mass, an extrapolation of the binding energies to the physical point is performed and is compared with experimental values and phenomenological predictions. The low-energy coefficients in pionless EFT relevant for two-baryon interactions, including those responsible for $SU(3)$ flavor-symmetry breaking, are constrained. The $SU(3)$ symmetry is observed to hold approximately at the chosen values of the quark masses, as well as the $SU(6)$ spin-flavor symmetry, predicted at large $N_c$. A remnant of an accidental $SU(16)$ symmetry found previously at a larger pion mass is further observed. The $SU(6)$-symmetric EFT constrained by these LQCD calculations is used to make predictions for two-baryon systems for which the low-energy scattering parameters could not be determined with LQCD directly in this study, and to constrain the coefficients of all leading $SU(3)$ flavor-symmetric interactions, demonstrating the predictive power of two-baryon EFTs matched to LQCD. △ Less

Submitted 23 March, 2021; v1 submitted 25 September, 2020; originally announced September 2020.

Comments: 69 pages, 31 figures and 25 tables; published version

Report number: ICCUB-20-020, UMD-PP-020-7, MIT-CTP/5238, INT-PUB-20-038, FERMILAB-PUB-20-498-T

Journal ref: Phys. Rev. D 103, 054508 (2021)