Showing 1–22 of 22 results for author: Munday, J N

Casimir repulsion with biased semiconductors

Authors: Benjamin Spreng, Calum Shelden, Tao Gong, Jeremy N. Munday

Abstract: Quantum and thermal fluctuations are fundamental to a plethora of phenomena within quantum optics, including the Casimir effect that acts between closely separated surfaces typically found in MEMS and NEMS devices. Particularly promising for engineering and harnessing these forces are systems out of thermal equilibrium. Recently, semiconductors with external bias have been proposed to study the no… ▽ More Quantum and thermal fluctuations are fundamental to a plethora of phenomena within quantum optics, including the Casimir effect that acts between closely separated surfaces typically found in MEMS and NEMS devices. Particularly promising for engineering and harnessing these forces are systems out of thermal equilibrium. Recently, semiconductors with external bias have been proposed to study the nonequilibrium Casimir force. Here, we explore systems involving moderately biased semiconductors that exhibit strong repulsive Casimir forces, and we determine the effects of bias voltage, semiconductor bandgap energy, and separation for experimentally accessible configurations. Modes emitted from the semiconductors exert a repulsive force on a near surface that overcomes the attractive equilibrium Casimir force contribution at submicron distances. For the geometry of two parallel planes, those modes undergo Fabry-Pérot interference resulting in an oscillatory force behavior as a function of separation. Utilizing the proximity-force approximation, we predict that the repulsive force exerted on a gold sphere is well within the accuracy of typical Casimir force experiments. Our work opens up new possibilities of controlling forces at the nano- and micrometer scale with applications in sensing and actuation in nanotechnology. △ Less

Submitted 13 March, 2024; originally announced March 2024.

Comments: 8 pages, 4 figures

Enhanced repulsive Casimir forces between gold and thin magnetodielectric plates

Authors: Calum Shelden, Benjamin Spreng, Jeremy N. Munday

Abstract: We calculate repulsive Casimir forces between metallic and magnetic plates and quantitatively probe the magnetic plate's properties as tuning knobs for the repulsion. Namely, the plate's thickness and its low-frequency permittivity and permeability. For a thin magnetic plate ($\leq 10\,\text{nm}$), we find that repulsion can exist as long as $μ(0) \geq ε(0)$. We also explore the effect of temperat… ▽ More We calculate repulsive Casimir forces between metallic and magnetic plates and quantitatively probe the magnetic plate's properties as tuning knobs for the repulsion. Namely, the plate's thickness and its low-frequency permittivity and permeability. For a thin magnetic plate ($\leq 10\,\text{nm}$), we find that repulsion can exist as long as $μ(0) \geq ε(0)$. We also explore the effect of temperature on the repulsion and transition distance between attractive and repulsive interactions. We show how the parameters can be tuned to allow repulsion at sub-micron separation regimes, making it potentially accessible to known high-resolution measurement techniques using magnetic van der Waals materials. △ Less

Submitted 13 June, 2023; v1 submitted 1 February, 2023; originally announced February 2023.

Comments: 8 pages, 7 figures in version 1; analytical work for Fig. 4 included in version 2

Electrically switchable Casimir forces using transparent conductive oxides

Authors: Tao Gong, Benjamin Spreng, Miguel Camacho, Inigo Liberal, Nader Engheta, Jeremy N. Munday

Abstract: Casimir forces between charge-neutral bodies originate from quantum vacuum fluctuations of electromagnetic fields, which exhibit a critical dependence on material's electromagnetic properties. Over the years, in-situ modulation of material's optical properties has been enabled through various means and has been widely exploited in a plethora of applications such as electro-optical modulation, tran… ▽ More Casimir forces between charge-neutral bodies originate from quantum vacuum fluctuations of electromagnetic fields, which exhibit a critical dependence on material's electromagnetic properties. Over the years, in-situ modulation of material's optical properties has been enabled through various means and has been widely exploited in a plethora of applications such as electro-optical modulation, transient color generation, bio- or chemical sensing, etc. Yet Casimir force modulation has been hindered by difficulty in achieving high modulation signals due to the broadband nature of the Casimir interaction. Here we propose and investigate two configurations that allow for in-situ modulation of Casimir forces through electrical gating of a metal-insulator-semiconductor (MIS) junction comprised of transparent conductive oxide (TCO) materials. By switching the gate voltage on and off, a force modulation of > 400 pN is predicted due to substantive charge carrier accumulation in the TCO layer, which can be easily measured using state-of-the-art force measurement techniques in an atomic force microscope (AFM). We further examine the influence of the oxide layer thickness on the force modulation, suggesting the importance of the fine control of the oxide layer deposition. Our work provides a promising pathway for modulating the Casimir effect in-situ with experimentally measurable force contrast. △ Less

Submitted 4 July, 2022; originally announced July 2022.

The Effect of Epsilon-Near-Zero (ENZ) Modes on the Casimir Interaction between Ultrathin Films

Authors: Tao Gong, Inigo Liberal, Benjamin Spreng, Miguel Camacho, Nader Engheta, Jeremy N. Munday

Abstract: Vacuum fluctuation-induced interactions between macroscopic metallic objects result in an attractive force between them, a phenomenon known as the Casimir effect. This force is the result of both plasmonic and photonic modes. For very thin films, field penetration through the films will modify the allowed modes. Here, we investigate the Casimir interaction between two ultrathin films from the pers… ▽ More Vacuum fluctuation-induced interactions between macroscopic metallic objects result in an attractive force between them, a phenomenon known as the Casimir effect. This force is the result of both plasmonic and photonic modes. For very thin films, field penetration through the films will modify the allowed modes. Here, we investigate the Casimir interaction between two ultrathin films from the perspective of the force distribution over real frequencies for the first time and find pronounced repulsive contributions to the force due to the highly confined and nearly dispersion-free epsilon-near-zero (ENZ) modes that only exist in ultrathin films. These contributions are found to persistently occur around the ENZ frequency of the film and are irrespective of the inter-film separation. We further associate the ENZ modes with a striking thickness dependence in the averaged force density for conductive thin films, a metric signifying a thin-film's acceleration due to Casimir effect. Our results shed light on the role of the unique vacuum fluctuation modes existing in ultrathin ENZ materials, which may offer significant potential for engineering the motion of objects in nanomechanical systems. △ Less

Submitted 5 May, 2022; originally announced May 2022.

Radiative energy bandgap of nanostructures coupled with quantum emitters around the epsilon-near-zero (ENZ) frequency

Authors: Tao Gong, Inigo Liberal, Miguel Camacho, Benjamin Spreng, Nader Engheta, Jeremy N. Munday

Abstract: Epsilon-near-zero (ENZ) materials have been demonstrated to exhibit unique electromagnetic properties. Here we propose the concept of radiative energy bandgap for an ENZ nanoparticle coupled with a quantum emitter (QE). The radiative emission of the coupled QE-nanoparticle can be significantly suppressed around the ENZ frequency and substantially enhanced otherwise, yielding an effective energy ba… ▽ More Epsilon-near-zero (ENZ) materials have been demonstrated to exhibit unique electromagnetic properties. Here we propose the concept of radiative energy bandgap for an ENZ nanoparticle coupled with a quantum emitter (QE). The radiative emission of the coupled QE-nanoparticle can be significantly suppressed around the ENZ frequency and substantially enhanced otherwise, yielding an effective energy bandgap for radiation. This suppression is effectively invariant with respect to the particle size and is therefore an intrinsic property of the ENZ material. Our concept also heralds an alternative pathway to quench the emission from a QE, which may find potential application in quantum information storage. △ Less

Submitted 3 March, 2022; originally announced March 2022.

Engineering Casimir interactions with epsilon-near-zero materials

Authors: Miguel Camacho, Tao Gong, Benjamin Spreng, Iñigo Liberal, Nader Engheta, Jeremy N. Munday

Abstract: In this paper we theoretically demonstrate the tunability of the Casimir force both in sign and magnitude between parallel plates coated with dispersive materials. We show that this force, existing between uncharged plates, can be tuned by carefully choosing the value of the plasma frequency (i.e., the epsilon-near-zero frequency) of the coating in the neighborhood of the resonance frequency of th… ▽ More In this paper we theoretically demonstrate the tunability of the Casimir force both in sign and magnitude between parallel plates coated with dispersive materials. We show that this force, existing between uncharged plates, can be tuned by carefully choosing the value of the plasma frequency (i.e., the epsilon-near-zero frequency) of the coating in the neighborhood of the resonance frequency of the cavity. The coating layer enables a continuous variation of the force between four limiting values when a coating is placed on each plate. We explore the consequences of such variation when pairs of electric and magnetic conductors (i.e. low and high impedance surfaces) are used as substrates on either side, showing that this continuous variation results in changes in the sign of the force, leading to both stable and unstable conditions, which could find interesting potential applications in nanomechanics including nanoparticle tweezing. △ Less

Submitted 5 December, 2021; originally announced December 2021.

Comments: 5 pages, 3 figures

Control of hot-carrier relaxation time in Au-Ag thin films through alloying

Authors: Sarvenaz Memarzadeh, Kevin J. Palm, Thomas E. Murphy, Marina S. Leite, Jeremy N. Munday

Abstract: The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal-alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of g… ▽ More The plasmon resonance of a structure is primarily dictated by its optical properties and geometry, which can be modified to enable hot-carrier photodetectors with superior performance. Recently, metal-alloys have played a prominent role in tuning the resonance of plasmonic structures through chemical composition engineering. However, it has been unclear how alloying modifies the time dynamics of generated hot-carriers. In this work, we elucidate the role of chemical composition on the relaxation time of hot-carriers for the archetypal Aux Ag1-x thin-film system. Through time-resolved optical spectroscopy measurements in the visible wavelength range, we measure composition-dependent relaxation times that vary up to 8x for constant pump fluency. Surprisingly, we find that the addition of 2% of Ag into Au films can increase the hot carrier lifetime by approximately 35% under fixed fluence, as a result of a decrease in optical loss. Further, the relaxation time is found to be inversely proportional to the imaginary part of the permittivity. Our results indicate that alloying is a promising approach to effectively control hot-carrier relaxation time in metals. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Surface Plasmon Assisted Control of Hot-Electron Relaxation Time

Authors: Sarvenaz Memarzadeh, Jongbum Kim, Yigit Aytac, Thomas E. Murphy, Jeremy N. Munday

Abstract: Surface plasmon mediated hot carrier generation is widely utilized for the manipulation of the electron-photon interactions in many types of optoelectronic devices including solar cells, photodiodes, and optical modulators. A diversity of plasmonic systems such as nanoparticles, resonators, and waveguides have been introduced to enhance hot carrier generation; however, the impact of the propagatin… ▽ More Surface plasmon mediated hot carrier generation is widely utilized for the manipulation of the electron-photon interactions in many types of optoelectronic devices including solar cells, photodiodes, and optical modulators. A diversity of plasmonic systems such as nanoparticles, resonators, and waveguides have been introduced to enhance hot carrier generation; however, the impact of the propagating surface plasmons on hot carrier lifetime has not been clearly demonstrated. Here, we systematically study the hot carrier relaxation in thin film gold (Au) samples under surface plasmon coupling with the Kretschmann configuration. We observe that the locally confined electric field at the surface of the metal significantly affects the hot carrier distribution and electron temperature, which results in a slowing of the hot electrons relaxation time, regardless of the average value of the absorbed power in the Au thin film. This result could be extended to other plasmonic nanostructures, enabling the control of hot carrier lifetimes throughout the optical frequency range. △ Less

Submitted 20 November, 2019; originally announced November 2019.

Sensitivity and accuracy of Casimir force measurements in air

Authors: Joseph L. Garrett, David A. T. Somers, Kyle Sendgikoski, Jeremy N. Munday

Abstract: Quantum electrodynamic fluctuations cause an attractive force between metallic surfaces. At separations where the finite speed of light affects the interaction, it is called the Casimir force. Thermal motion determines the fundamental sensitivity limits of its measurement at room temperature, but several other systematic errors contribute uncertainty as well and become more significant in air rela… ▽ More Quantum electrodynamic fluctuations cause an attractive force between metallic surfaces. At separations where the finite speed of light affects the interaction, it is called the Casimir force. Thermal motion determines the fundamental sensitivity limits of its measurement at room temperature, but several other systematic errors contribute uncertainty as well and become more significant in air relative to vacuum. Here we discuss the viability of several measurement techniques in air (force modulation, frequency modulation, and quasi-static deflection), characterize their sensitivity and accuracy by identifying several dominant sources of uncertainty, and compare the results to the fundamental sensitivity limits dictated by thermal motion and to the uncertainty inherent to calculations of the Casimir force. Finally, we explore prospects for mitigating the sources of uncertainty to enhance the range and accuracy of Casimir force measurements. △ Less

Submitted 25 August, 2019; v1 submitted 17 November, 2018; originally announced November 2018.

Comments: 21 pages, 16 Figures In version 2: section on frequency modulation based measurements reduced, section on the estimation of the residual hydrodynamic force added

Journal ref: Phys. Rev. A 100, 022508 (2019)

Dynamic optical properties of metal hydrides

Authors: Kevin J. Palm, Joseph B. Murray, Tarun C. Narayan, Jeremy N. Munday

Abstract: Metal hydrides often display dramatic changes in optical properties upon hydrogenation. These shifts make them prime candidates for many tunable optical devices, such as optical hydrogen sensors and switchable mirrors. While some of these metals, such as palladium, have been well studied, many other promising materials have only been characterized over a limited optical range and lack direct in si… ▽ More Metal hydrides often display dramatic changes in optical properties upon hydrogenation. These shifts make them prime candidates for many tunable optical devices, such as optical hydrogen sensors and switchable mirrors. While some of these metals, such as palladium, have been well studied, many other promising materials have only been characterized over a limited optical range and lack direct in situ measurements of hydrogen loading, limiting their potential applications. Further, there have been no systematic studies that allow for a clear comparison between these metals. In this work, we present such a systematic study of the dynamically tunable optical properties of Pd, Mg, Zr, Ti, and V throughout hydrogenation with a wavelength range of 250 - 1690 nm. These measurements were performed in an environmental chamber, which combines mass measurements via a quartz crystal microbalance with ellipsometric measurements in up to 7 bar of hydrogen gas, allowing us to determine the optical properties during hydrogen loading. In addition, we demonstrate a further tunability of the optical properties of titanium and its hydride by altering annealing conditions, and we investigate the optical and gravimetric hysteresis that occurs during hydrogenation cycling of palladium. Finally, we demonstrate several nanoscale optical and plasmonic structures based on these dynamic properties. We show structures that, upon hydrogenation, demonstrate five orders of magnitude change in reflectivity, resonance shifts of >200 nm, and relative transmission switching of >3000%, suggesting a wide range of applications. △ Less

Submitted 4 September, 2018; v1 submitted 22 August, 2018; originally announced August 2018.

Alignment-dependent decay rate of an atomic dipole near an optical nanofiber

Authors: Pablo Solano, Jeffrey A. Grover, Yunlu Xu, Pablo Barberis-Blostein, Jeremy N. Munday, Luis A. Orozco, William D. Phillips, Steven L. Rolston

Abstract: We study the modification of the atomic spontaneous emission rate, i.e. Purcell effect, of $^{87}$Rb in the vicinity of an optical nanofiber ($\sim$500 nm diameter). We observe enhancement and inhibition of the atomic decay rate depending on the alignment of the induced atomic dipole relative to the nanofiber. Finite-difference time-domain simulations are in quantitative agreement with the measure… ▽ More We study the modification of the atomic spontaneous emission rate, i.e. Purcell effect, of $^{87}$Rb in the vicinity of an optical nanofiber ($\sim$500 nm diameter). We observe enhancement and inhibition of the atomic decay rate depending on the alignment of the induced atomic dipole relative to the nanofiber. Finite-difference time-domain simulations are in quantitative agreement with the measurements when considering the atoms as simple oscillating linear dipoles. This is surprising since the multi-level nature of the atoms should produce a different radiation pattern, predicting smaller modification of the lifetime than the measured ones. This work is a step towards characterizing and controlling atomic properties near optical waveguides, fundamental tools for the development of quantum photonics. △ Less

Submitted 27 April, 2017; originally announced April 2017.

Journal ref: Phys. Rev. A 99, 013822 (2019)

Effect of lateral tip motion on multifrequency atomic force microscopy

Authors: Joseph L. Garrett, Lisa J. Krayer, Kevin J. Palm, Jeremy N. Munday

Abstract: In atomic force microscopy (AFM), the angle relative to the vertical ($θ_{i}$) that the tip apex of a cantilever moves is determined by the tilt of the probe holder and the geometries of the cantilever and actuated eigenmode $i$. Even though the effects of $θ_{i}$ on static and single-frequency AFM are known (increased effective spring constant, sensitivity to sample anisotropy, etc), the higher e… ▽ More In atomic force microscopy (AFM), the angle relative to the vertical ($θ_{i}$) that the tip apex of a cantilever moves is determined by the tilt of the probe holder and the geometries of the cantilever and actuated eigenmode $i$. Even though the effects of $θ_{i}$ on static and single-frequency AFM are known (increased effective spring constant, sensitivity to sample anisotropy, etc), the higher eigenmodes used in multifrequency force microscopy lead to additional effects that have not been fully explored. Here we use Kelvin probe force microscopy (KPFM) to investigate how $θ_{i}$ affects not only the signal amplitude and phase, but can also lead to behaviors such as destabilization of the KPFM voltage feedback loop. We find that longer cantilevers and modified sample orientations improve voltage feedback loop stability, even though variations to scanning parameters such as cantilever shake amplitude and lift height do not. △ Less

Submitted 19 July, 2017; v1 submitted 19 April, 2017; originally announced April 2017.

Comments: 5 pages of text, 5 figures. Revision replaces discussion of bimodal AFM with more discussion of experimental results

Journal ref: Appl. Phys. Lett. 111, 043105 (2017)

Mid-infrared time-resolved photoconduction in black phosphorus

Authors: Ryan J. Suess, Edward Leong, Joseph L. Garrett, Tong Zhou, Reza Salem, Jeremy N. Munday, Thomas E. Murphy, Martin Mittendorff

Abstract: Black phosphorus has attracted interest as a material for use in optoelectronic devices due to many favorable properties such as a high carrier mobility, field-effect, and a direct bandgap that can range from 0.3 eV in its bulk crystalline form to 2 eV for a single atomic layer. The low bandgap energy for bulk black phosphorus allows for direct transition photoabsorption that enables detection of… ▽ More Black phosphorus has attracted interest as a material for use in optoelectronic devices due to many favorable properties such as a high carrier mobility, field-effect, and a direct bandgap that can range from 0.3 eV in its bulk crystalline form to 2 eV for a single atomic layer. The low bandgap energy for bulk black phosphorus allows for direct transition photoabsorption that enables detection of light out to mid-infrared frequencies. In this work we characterize the room temperature optical response of a black phosphorus photoconductive detector at wavelengths ranging from 1.56 $μ$m to 3.75 $μ$m. Pulsed autocorrelation measurements in the near-infrared regime reveal a strong, sub-linear photocurrent nonlinearity with a response time of 1 ns, indicating that gigahertz electrical bandwidth is feasible. Time resolved photoconduction measurements covering near- and mid-infrared frequencies show a fast 65 ps rise time, followed by a carrier relaxation with a time scale that matches the intrinsic limit determined by autocorrelation. The sublinear photoresponse is shown to be caused by a reduction in the carrier relaxation time as more energy is absorbed in the black phosphorus flake and is well described by a carrier recombination model that is nonlinear with excess carrier density. The device exhibits a measured noise-equivalent power of 530 pW/$\sqrt{\text{Hz}}$ which is the expected value for Johnson noise limited performance. The fast and sensitive room temperature photoresponse demonstrates that black phosphorus is a promising new material for mid-infrared optoelectronics. △ Less

Submitted 7 September, 2016; originally announced September 2016.

Comments: 18 pages, 6 figures

Fast, high-resolution surface potential measurements in air with heterodyne Kelvin probe force microscopy

Authors: Joseph L. Garrett, Jeremy N. Munday

Abstract: Kelvin probe force microscopy (KPFM) adapts an atomic force microscope to measure electric potential on surfaces at nanometer length scales. Here we demonstrate that Heterodyne-KPFM enables scan rates of several frames per minute in air, and concurrently maintains spatial resolution and voltage sensitivity comparable to frequency-modulation KPFM, the current spatial resolution standard. Two common… ▽ More Kelvin probe force microscopy (KPFM) adapts an atomic force microscope to measure electric potential on surfaces at nanometer length scales. Here we demonstrate that Heterodyne-KPFM enables scan rates of several frames per minute in air, and concurrently maintains spatial resolution and voltage sensitivity comparable to frequency-modulation KPFM, the current spatial resolution standard. Two common classes of topography-coupled artifacts are shown to be avoidable with H-KPFM. A second implementation of H-KPFM is also introduced, in which the voltage signal is amplified by the first cantilever resonance for enhanced sensitivity. The enhanced temporal resolution of H-KPFM can enable the imaging of many dynamic processes, such as such as electrochromic switching, phase transitions, and device degredation (battery, solar, etc.), which take place over seconds to minutes and involve changes in electric potential at nanometer lengths. △ Less

Submitted 11 April, 2016; v1 submitted 11 January, 2016; originally announced January 2016.

Comments: 14 pages, 12 figures

Rotation of a liquid crystal by the Casimir torque

Authors: David A. T. Somers, Jeremy N. Munday

Abstract: We present a calculation of the Casimir torque acting on a liquid crystal near a birefringent crystal. In this system, a liquid crystal bulk is uniformly aligned at one surface and is twisted at the other surface by a birefringent crystal, e.g. barium titanate. The liquid crystal is separated from the solid crystal by an isotropic, transparent material such as SiO$_2$. By varying the thickness of… ▽ More We present a calculation of the Casimir torque acting on a liquid crystal near a birefringent crystal. In this system, a liquid crystal bulk is uniformly aligned at one surface and is twisted at the other surface by a birefringent crystal, e.g. barium titanate. The liquid crystal is separated from the solid crystal by an isotropic, transparent material such as SiO$_2$. By varying the thickness of the deposited layer, we can observe the effect of retardation on the torque (which differentiates it from the close-range van der Waals torque). We find that a barium titanate slab would cause 5CB (4-cyano-4$'$-pentylbiphenyl) liquid crystal to rotate by 10$^\circ$ through its bulk when separated by 35 nm of SiO$_2$. The optical technique for measuring this twist is also outlined. △ Less

Submitted 6 April, 2015; originally announced April 2015.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. A 91, 032520 (2015)

The Shockley-Queisser limit for nanostructured solar cells

Authors: Yunlu Xu, Tao Gong, Jeremy N. Munday

Abstract: The Shockley-Queisser limit describes the maximum solar energy conversion efficiency achievable for a particular material and is the standard by which new photovoltaic technologies are compared. This limit is based on the principle of detailed balance, which equates the photon flux into a device to the particle flux (photons or electrons) out of that device. Nanostructured solar cells represent a… ▽ More The Shockley-Queisser limit describes the maximum solar energy conversion efficiency achievable for a particular material and is the standard by which new photovoltaic technologies are compared. This limit is based on the principle of detailed balance, which equates the photon flux into a device to the particle flux (photons or electrons) out of that device. Nanostructured solar cells represent a new class of photovoltaic devices, and questions have been raised about whether or not they can exceed the Shockley-Queisser limit. Here we show that single-junction nanostructured solar cells have a theoretical maximum efficiency of 42% under AM 1.5 solar illumination. While this exceeds the efficiency of a non- concentrating planar device, it does not exceed the Shockley-Queisser limit for a planar device with optical concentration. We conclude that nanostructured solar cells offer an important route towards higher efficiency photovoltaic devices through a built-in optical concentration. △ Less

Submitted 2 December, 2014; originally announced December 2014.

The effect of patch potentials in Casimir force measurements determined by heterodyne Kelvin probe force microscopy

Authors: Joseph L. Garrett, David Somers, Jeremy N. Munday

Abstract: Measurements of the Casimir force require the elimination of electrostatic interactions between the surfaces. However, due to electrostatic patch potentials, the voltage required to minimize the total force may not be sufficient to completely nullify the electrostatic interaction. Thus, these surface potential variations cause an additional force, which can obscure the Casimir force signal. In thi… ▽ More Measurements of the Casimir force require the elimination of electrostatic interactions between the surfaces. However, due to electrostatic patch potentials, the voltage required to minimize the total force may not be sufficient to completely nullify the electrostatic interaction. Thus, these surface potential variations cause an additional force, which can obscure the Casimir force signal. In this paper, we inspect the spatially varying surface potential (SP) of e-beamed, sputtered, sputtered and annealed, and template stripped gold surfaces with Heterodyne Amplitude Modulated Kelvin Probe Force Microscopy (HAM-KPFM). It is demonstrated that HAM-KPFM improves the spatial resolution of surface potential measurements compared to Amplitude Modulated Kelvin Probe Force Microscopy (AM-KPFM). We find that patch potentials vary depending on sample preparation, and that the calculated pressure can be similar to the pressure difference between Casimir force calculations employing the plasma and Drude models. △ Less

Submitted 17 September, 2014; originally announced September 2014.

Journal ref: J. Phys.: Condens. Matter 27 (2015) 214012

Measurements of the Casimir-Lifshitz force in fluids: the effect of electrostatic forces and Debye screening

Authors: J. N. Munday, Federico Capasso, V. Adrian Parsegian, Sergey M. Bezrukov

Abstract: In this work, we present detailed measurements of the Casimir-Lifshitz force between two gold surfaces (a sphere and a plate) immersed in ethanol and study the effect of residual electrostatic forces, which are dominated by static fields within the apparatus and can be reduced with proper shielding. Electrostatic forces are further reduced by Debye screening through the addition of salt ions to… ▽ More In this work, we present detailed measurements of the Casimir-Lifshitz force between two gold surfaces (a sphere and a plate) immersed in ethanol and study the effect of residual electrostatic forces, which are dominated by static fields within the apparatus and can be reduced with proper shielding. Electrostatic forces are further reduced by Debye screening through the addition of salt ions to the liquid. Additionally, the salt leads to a reduction of the Casimir-Lifshitz force by screening the zero-frequency contribution to the force; however, the effect is small between gold surfaces at the measured separations and within experimental error. An improved calibration procedure is described and compared to previous methods. Finally, the experimental results are compared to Lifshitz's theory and found to be consistent for the materials used in the experiment. △ Less

Submitted 13 August, 2008; originally announced August 2008.

Comments: 11 figures. PRA in press

Stable suspension and dispersion-induced transitions from repulsive Casimir forces between fluid-separated eccentric cylinders

Authors: Alejandro W. Rodriguez, J. N. Munday, J. D. Joannopoulos, Federico Capasso, Diego A. R. Dalvit, Steven G. Johnson

Abstract: Using an exact numerical method for finite nonplanar objects, we demonstrate a stable mechanical suspension of a silica cylinder within a metallic cylinder separated by ethanol, via a repulsive Casimir force between the silica and the metal. We investigate cylinders with both circular and square cross sections, and show that the latter exhibit a stable orientation as well as a stable position, v… ▽ More Using an exact numerical method for finite nonplanar objects, we demonstrate a stable mechanical suspension of a silica cylinder within a metallic cylinder separated by ethanol, via a repulsive Casimir force between the silica and the metal. We investigate cylinders with both circular and square cross sections, and show that the latter exhibit a stable orientation as well as a stable position, via a method to compute Casimir torques for finite objects. Furthermore, the stable orientation of the square cylinder is shown to undergo an unusual 45 degrees transition as a function of the separation lengthscale, which is explained as a consequence of material dispersion. △ Less

Submitted 8 November, 2008; v1 submitted 25 July, 2008; originally announced July 2008.

Comments: Published in Physical Review Letters. Vol. 101, page, 190404 (2008)

Reply to "Comment on 'Precision measurement of the Casimir-Lifshitz force in a fluid'"

Authors: J. N. Munday, Federico Capasso

Abstract: We have reviewed the Comment of Geyer et al. [arXiv:0708.1548] concerning our recent work [Phys. Rev. A 75, 060102 (R) (2007)], and while we disagree with their criticisms, we acknowledge them for giving us the opportunity to add interesting addition material and a more detailed description of our experiment. We describe further our calculation and explain why a more sophisticated model is not w… ▽ More We have reviewed the Comment of Geyer et al. [arXiv:0708.1548] concerning our recent work [Phys. Rev. A 75, 060102 (R) (2007)], and while we disagree with their criticisms, we acknowledge them for giving us the opportunity to add interesting addition material and a more detailed description of our experiment. We describe further our calculation and explain why a more sophisticated model is not warranted. We also present detailed experiments on the effects of electrostatic forces in our measurements and show that the contribution due to work function differences is small and that the residual electrostatic force is dominated by trapped charges and external fields. Finally, we estimate the effect of double layer interactions. These additional calculations and measurements support our original conclusion that the experimental results are consistent with the Lifshitz theory. △ Less

Submitted 27 February, 2008; v1 submitted 15 November, 2007; originally announced November 2007.

Precision measurement of the Casimir-Lifshitz force in a fluid

Authors: J. N. Munday, Federico Capasso

Abstract: The Casimir force, which results from the confinement of the quantum mechanical zero-point fluctuations of the electromagnetic fields, has received significant attention in recent years for its effect on micro- and nano-scale mechanical systems. With few exceptions, experimental observations have been limited to conductive bodies interacting separated by vacuum or air. However, interesting pheno… ▽ More The Casimir force, which results from the confinement of the quantum mechanical zero-point fluctuations of the electromagnetic fields, has received significant attention in recent years for its effect on micro- and nano-scale mechanical systems. With few exceptions, experimental observations have been limited to conductive bodies interacting separated by vacuum or air. However, interesting phenomena including repulsive forces are expected to exist in certain circumstances between metals and dielectrics when the intervening medium is not vacuum. In order to better understand the effect of the Casimir force in such situations and to test the robustness of the generalized Casimir-Lifshitz theory, we have performed the first precision measurements of the Casimir force between two metals immersed in a fluid. For this situation, the measured force is attractive and is approximately 80% smaller than the force predicted by Casimir for ideal metals in vacuum. We present experimental results and find them to be consistent with Lifshitz's theory. △ Less

Submitted 28 June, 2007; v1 submitted 25 May, 2007; originally announced May 2007.

Comments: 6 pages, 3 figures. (version before final publication)

Journal ref: Phys. Rev. A 75, 060102(R) (2007)

On the torque on birefringent plates induced by quantum fluctuations

Authors: Davide Iannuzzi, Jeremy N. Munday, Yuri Barash, Federico Capasso

Abstract: We present detailed numerical calculations of the mechanical torque induced by quantum fluctuations on two parallel birefringent plates with in plane optical anisotropy, separated by either vacuum or a liquid (ethanol). The torque is found to vary as $\sin(2θ)$, where $θ$ represents the angle between the two optical axes, and its magnitude rapidly increases with decreasing plate separation $d$.… ▽ More We present detailed numerical calculations of the mechanical torque induced by quantum fluctuations on two parallel birefringent plates with in plane optical anisotropy, separated by either vacuum or a liquid (ethanol). The torque is found to vary as $\sin(2θ)$, where $θ$ represents the angle between the two optical axes, and its magnitude rapidly increases with decreasing plate separation $d$. For a 40 $μ$m diameter disk, made out of either quartz or calcite, kept parallel to a Barium Titanate plate at $d\simeq 100$ nm, the maximum torque (at $θ={π\over 4}$) is of the order of $\simeq 10^{-19}$ N$\cdot$m. We propose an experiment to observe this torque when the Barium Titanate plate is immersed in ethanol and the other birefringent disk is placed on top of it. In this case the retarded van der Waals (or Casimir-Lifshitz) force between the two birefringent slabs is repulsive. The disk would float parallel to the plate at a distance where its net weight is counterbalanced by the retarded van der Waals repulsion, free to rotate in response to very small driving torques. △ Less

Submitted 18 October, 2004; originally announced October 2004.

Comments: 7 figures, submitted to Phys. Rev. A

Journal ref: Phys. Rev. A71, 042102 (2005) (slightly different version)