-
Simulating X-ray absorption spectroscopy of battery materials on a quantum computer
Authors:
Stepan Fomichev,
Kasra Hejazi,
Ignacio Loaiza,
Modjtaba Shokrian Zini,
Alain Delgado,
Arne-Christian Voigt,
Jonathan E. Mueller,
Juan Miguel Arrazola
Abstract:
X-ray absorption spectroscopy is a crucial experimental technique for elucidating the mechanisms of structural degradation in battery materials. However, extracting information from the measured spectrum is challenging without high-quality simulations. In this work, we propose simulating near-edge X-ray absorption spectra as a promising application for quantum computing. It is attractive due to th…
▽ More
X-ray absorption spectroscopy is a crucial experimental technique for elucidating the mechanisms of structural degradation in battery materials. However, extracting information from the measured spectrum is challenging without high-quality simulations. In this work, we propose simulating near-edge X-ray absorption spectra as a promising application for quantum computing. It is attractive due to the ultralocal nature of X-ray absorption that significantly reduces the sizes of problems to be simulated, and because of the classical hardness of simulating spectra. We describe three quantum algorithms to compute the X-ray absorption spectrum and provide their asymptotic cost. One of these is a Monte-Carlo based time-domain algorithm, which is cost-friendly to early fault-tolerant quantum computers. We then apply the framework to an industrially relevant example, a CAS(22e,18o) active space for an O-Mn cluster in a Li-excess battery cathode, showing that practically useful simulations could be obtained with much fewer qubits and gates than ground-state energy estimation of the same material.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
Initial state preparation for quantum chemistry on quantum computers
Authors:
Stepan Fomichev,
Kasra Hejazi,
Modjtaba Shokrian Zini,
Matthew Kiser,
Joana Fraxanet Morales,
Pablo Antonio Moreno Casares,
Alain Delgado,
Joonsuk Huh,
Arne-Christian Voigt,
Jonathan E. Mueller,
Juan Miguel Arrazola
Abstract:
Quantum algorithms for ground-state energy estimation of chemical systems require a high-quality initial state. However, initial state preparation is commonly either neglected entirely, or assumed to be solved by a simple product state like Hartree-Fock. Even if a nontrivial state is prepared, strong correlations render ground state overlap inadequate for quality assessment. In this work, we addre…
▽ More
Quantum algorithms for ground-state energy estimation of chemical systems require a high-quality initial state. However, initial state preparation is commonly either neglected entirely, or assumed to be solved by a simple product state like Hartree-Fock. Even if a nontrivial state is prepared, strong correlations render ground state overlap inadequate for quality assessment. In this work, we address the initial state preparation problem with an end-to-end algorithm that prepares and quantifies the quality of initial states, accomplishing the latter with a new metric -- the energy distribution. To be able to prepare more complicated initial states, we introduce an implementation technique for states in the form of a sum of Slater determinants that exhibits significantly better scaling than all prior approaches. We also propose low-precision quantum phase estimation (QPE) for further state quality refinement. The complete algorithm is capable of generating high-quality states for energy estimation, and is shown in select cases to lower the overall estimation cost by several orders of magnitude when compared with the best single product state ansatz. More broadly, the energy distribution picture suggests that the goal of QPE should be reinterpreted as generating improvements compared to the energy of the initial state and other classical estimates, which can still be achieved even if QPE does not project directly onto the ground state. Finally, we show how the energy distribution can help in identifying potential quantum advantage.
△ Less
Submitted 8 February, 2024; v1 submitted 27 October, 2023;
originally announced October 2023.
-
Quantum simulation of battery materials using ionic pseudopotentials
Authors:
Modjtaba Shokrian Zini,
Alain Delgado,
Roberto dos Reis,
Pablo A. M. Casares,
Jonathan E. Mueller,
Arne-Christian Voigt,
Juan Miguel Arrazola
Abstract:
Ionic pseudopotentials are widely used in classical simulations of materials to model the effective potential due to the nucleus and the core electrons. Modeling fewer electrons explicitly results in a reduction in the number of plane waves needed to accurately represent the states of a system. In this work, we introduce a quantum algorithm that uses pseudopotentials to reduce the cost of simulati…
▽ More
Ionic pseudopotentials are widely used in classical simulations of materials to model the effective potential due to the nucleus and the core electrons. Modeling fewer electrons explicitly results in a reduction in the number of plane waves needed to accurately represent the states of a system. In this work, we introduce a quantum algorithm that uses pseudopotentials to reduce the cost of simulating periodic materials on a quantum computer. We use a qubitization-based quantum phase estimation algorithm that employs a first-quantization representation of the Hamiltonian in a plane-wave basis. We address the challenge of incorporating the complexity of pseudopotentials into quantum simulations by develo** highly-optimized compilation strategies for the qubitization of the Hamiltonian. This includes a linear combination of unitaries decomposition that leverages the form of separable pseudopotentials. Our strategies make use of quantum read-only memory subroutines as a more efficient alternative to quantum arithmetic. We estimate the computational cost of applying our algorithm to simulating lithium-excess cathode materials for batteries, where more accurate simulations are needed to inform strategies for gaining reversible access to the excess capacity they offer. We estimate the number of qubits and Toffoli gates required to perform sufficiently accurate simulations with our algorithm for three materials: lithium manganese oxide, lithium nickel-manganese oxide, and lithium manganese oxyfluoride. Our optimized compilation strategies result in a pseudopotential-based quantum algorithm with a total Toffoli cost four orders of magnitude lower than the previous state of the art for a fixed target accuracy.
△ Less
Submitted 4 July, 2023; v1 submitted 15 February, 2023;
originally announced February 2023.
-
Beam Longitudinal Dynamics Simulation Suite BLonD
Authors:
Helga Timko,
Simon Albright,
Theodoros Argyropoulos,
Konstantinos Iliakis,
Birk Emil Karlsen-Bæck,
Ivan Karpov,
Alexandre Lasheen,
Luis Eduardo Medina,
Danilo Quartullo,
Joël Repond,
Juan Esteban Müller,
Markus Schwarz,
Panagiotis Tsapatsaris,
Georgios Typaldos
Abstract:
The beam longitudinal dynamics code BLonD has been developed at CERN since 2014 and has become a central tool for longitudinal beam dynamics simulations. In this paper, we present this modular simulation suite and the various physics models that can be included and combined by the user. We detail the reference frame, the equations of motion, the BLonD-specific options for radio-frequency parameter…
▽ More
The beam longitudinal dynamics code BLonD has been developed at CERN since 2014 and has become a central tool for longitudinal beam dynamics simulations. In this paper, we present this modular simulation suite and the various physics models that can be included and combined by the user. We detail the reference frame, the equations of motion, the BLonD-specific options for radio-frequency parameters such as phase noise, fixed-field acceleration, and feedback models for the CERN accelerators, as well as the modeling of collective effects and synchrotron radiation. We also present various methods of generating multi-bunch distributions matched to a given impedance model. BLonD is furthermore a well-tested and optimized simulation suite, which is demonstrated through examples, too.
△ Less
Submitted 3 October, 2022; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Simulating key properties of lithium-ion batteries with a fault-tolerant quantum computer
Authors:
Alain Delgado,
Pablo A. M. Casares,
Roberto dos Reis,
Modjtaba Shokrian Zini,
Roberto Campos,
Norge Cruz-Hernández,
Arne-Christian Voigt,
Angus Lowe,
Soran Jahangiri,
M. A. Martin-Delgado,
Jonathan E. Mueller,
Juan Miguel Arrazola
Abstract:
There is a pressing need to develop new rechargeable battery technologies that can offer higher energy storage, faster charging, and lower costs. Despite the success of existing methods for the simulation of battery materials, they can sometimes fall short of delivering accurate and reliable results. Quantum computing has been discussed as an avenue to overcome these issues, but only limited work…
▽ More
There is a pressing need to develop new rechargeable battery technologies that can offer higher energy storage, faster charging, and lower costs. Despite the success of existing methods for the simulation of battery materials, they can sometimes fall short of delivering accurate and reliable results. Quantum computing has been discussed as an avenue to overcome these issues, but only limited work has been done to outline how they may impact battery simulations. In this work, we provide a detailed answer to the following question: how can a quantum computer be used to simulate key properties of a lithium-ion battery? Based on recently-introduced first-quantization techniques, we lay out an end-to-end quantum algorithm for calculating equilibrium cell voltages, ionic mobility, and thermal stability. These can be obtained from ground-state energies of materials, which is the core calculation executed by the quantum computer using qubitization-based quantum phase estimation. The algorithm includes explicit methods for preparing approximate ground states of periodic materials in first quantization. We bring these insights together to perform the first estimation of the resources required to implement a quantum algorithm for simulating a realistic cathode material, dilithium iron silicate.
△ Less
Submitted 6 February, 2023; v1 submitted 25 April, 2022;
originally announced April 2022.
-
Safe Transformative AI via a Windfall Clause
Authors:
Paolo Bova,
Jonas Emanuel Müller,
Benjamin Harack
Abstract:
Society could soon see transformative artificial intelligence (TAI). Models of competition for TAI show firms face strong competitive pressure to deploy TAI systems before they are safe. This paper explores a proposed solution to this problem, a Windfall Clause, where developers commit to donating a significant portion of any eventual extremely large profits to good causes. However, a key challeng…
▽ More
Society could soon see transformative artificial intelligence (TAI). Models of competition for TAI show firms face strong competitive pressure to deploy TAI systems before they are safe. This paper explores a proposed solution to this problem, a Windfall Clause, where developers commit to donating a significant portion of any eventual extremely large profits to good causes. However, a key challenge for a Windfall Clause is that firms must have reason to join one. Firms must also believe these commitments are credible. We extend a model of TAI competition with a Windfall Clause to show how firms and policymakers can design a Windfall Clause which overcomes these challenges. Encouragingly, firms benefit from joining a Windfall Clause under a wide range of scenarios. We also find that firms join the Windfall Clause more often when the competition is more dangerous. Even when firms learn each other's capabilities, firms rarely wish to withdraw their support for the Windfall Clause. These three findings strengthen the case for using a Windfall Clause to promote the safe development of TAI.
△ Less
Submitted 28 August, 2021; v1 submitted 20 August, 2021;
originally announced August 2021.
-
ReaxFF Reactive Force Field Development for Cu/Si Systems and application to Copper Cluster Formation During Cu Diffusion Inside Silicon
Authors:
Kamyar Akbari Roshan,
Mahdi Khajeh Talkhoncheh,
Jonathan E. Mueller,
William A. Goddard III,
Adri C. T. van Duin
Abstract:
Transition metal impurities such as nickel, copper, and iron, in solid-state materials like silicon have a significant impact on the electrical performance of integrated circuits and solar cells. To study the impact of copper impurities inside bulk silicon on the electrical properties of the material, one needs to understand the configurational space of copper atoms incorporated inside the silicon…
▽ More
Transition metal impurities such as nickel, copper, and iron, in solid-state materials like silicon have a significant impact on the electrical performance of integrated circuits and solar cells. To study the impact of copper impurities inside bulk silicon on the electrical properties of the material, one needs to understand the configurational space of copper atoms incorporated inside the silicon lattice. In this work, we performed ReaxFF reactive force field based molecular dynamics simulations, studying different configurations of individual and crystalline copper atoms inside bulk silicon by looking at the diffusional behavior of copper in silicon. The ReaxFF Cu/Si parameter set was developed by training against DFT data, including the energy barrier for an individual Cu-atom inside a silicon lattice. We found that the diffusion of copper atoms has a direct relationship with the temperature. Moreover, it is also shown that individual copper atoms start to clusterize inside bulk silicon at elevated temperatures. Our simulation results provide a comprehensive picture of the effects of temperature and copper concentration on the crystallization of individual copper inside silicon lattice. Finally, the stress-strain relationship of Cu/Si compounds under uniaxial tensile loading have been obtained. Our results indicate a decrease in the elastic modulus with increasing level of Cu-impurity concentration. We observe spontaneous microcracking of the Si during the stress-strain tests as a consequence of the formation of a small Cu clusters adjacent to the Si surface.
△ Less
Submitted 1 February, 2021;
originally announced February 2021.
-
Machine Layout and Performance
Authors:
D. Angal-Kalinin,
R. Appleby,
G. Arduini,
D. Banfi,
J. Barranco,
N. Biancacci,
D. Brett,
R. Bruce,
O. Bruening,
X. Buffat,
A. Burov,
Y. Cai,
R. Calaga,
A. Chancé,
M. Crouch,
B. Dalena,
H. Day,
R. de Maria,
J. Esteban Muller,
S. Fartoukh,
M. Fitterer,
O. Frasciello,
M. Giovannozzi,
W. Herr,
W. Höfle
, et al. (35 additional authors not shown)
Abstract:
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Progress with the Upgrade of the SPS for the HL-LHC Era
Authors:
B. Goddard,
T. Argyropoulos,
H. Bartosik,
W. Bartmann,
T. Bohl,
F. Caspers,
K. Cornelis,
H. Damerau,
L. Drøsdal,
L. Ducimetière,
R. Garoby,
M. Gourber-Pace,
W. Höfle,
G. Iadarola,
L. Jensen,
V. Kain,
R. Losito,
M. Meddahi,
A. Mereghetti,
V. Mertens,
Ö. Mete,
E. Montesinos,
J. E. Müller,
Y. Papaphilippou,
G. Rumolo
, et al. (6 additional authors not shown)
Abstract:
The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this paper the performance requirements for the SPS and the known limitations are reviewed in the light of the 2012 operational experience. The various SPS upgrades in progress and still under consideration are described, in ad…
▽ More
The demanding beam performance requirements of the High Luminosity (HL-) LHC project translate into a set of requirements and upgrade paths for the LHC injector complex. In this paper the performance requirements for the SPS and the known limitations are reviewed in the light of the 2012 operational experience. The various SPS upgrades in progress and still under consideration are described, in addition to the machine studies and simulations performed in 2012. The expected machine performance reach is estimated on the basis of the present knowledge, and the remaining decisions that still need to be made concerning upgrade options are detailed.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
