Showing 1–7 of 7 results for author: Mudarra, M

Double glass transition in polyethylene naphthalate structural relaxation by MDSC, BDS and TSDC

Authors: J. C. Cañadas, J. A. Diego, S. Diez-Berart, D. O. López, M. Mudarra, J. Salud, J. Sellarès

Abstract: In this work, we present an experimental study of the primary and secondary relaxations of the semi-crystalline polymer polyethylene naphthalate (PEN), by Modulated Differential Scanning Calorimetry (MDSC), Thermally Stimulated Depolarization Currents (TSDC) and Broadband Dielectric Spectroscopy (BDS), and how they are affected by physical aging. Three dipolar relaxation modes can be observed: (fr… ▽ More In this work, we present an experimental study of the primary and secondary relaxations of the semi-crystalline polymer polyethylene naphthalate (PEN), by Modulated Differential Scanning Calorimetry (MDSC), Thermally Stimulated Depolarization Currents (TSDC) and Broadband Dielectric Spectroscopy (BDS), and how they are affected by physical aging. Three dipolar relaxation modes can be observed: (from slowest to fastest) the primary $α$ relaxation, which vitrifies at the glass transition temperature, $T_{gα}$, and two secondary relaxations, named $β^*$ and $β$. MDSC results show how the secondary $β^*$ relaxation also vitrifies, giving rise to an additional glass transition at $T_{gβ^*} < T_{gα}$. In fact, the $α$ and $β^*$ relaxations can be considered as part of a very broad and distributed relaxation. Its main part is the primary $α$ relaxation with a shoulder at the high-frequency region corresponding to a complex secondary $β^*$ relaxation. BDS results about the $β^*$ can be modeled by a main contribution ($β_3^*$) and two additional ones ($β_1^*$ and $β_2^*$) with a weaker dielectric strength. TSDC results show that each single mode of the relaxation has its own glass transition temperature and they are compatible with the structure inferred by BDS. This scenario gives rise to an extended glass transition dually centered in the $T_{gβ^*} \sim 305$ K and $T_{gα} \sim 387$ K. temperatures. △ Less

Submitted 9 May, 2024; v1 submitted 21 July, 2023; originally announced July 2023.

Comparison of pulsed electroacoustic and thermally stimulated depolarization current measurements of thermally poled PET electrets

Authors: S. E. Parsa, J. C. Cañadas, J. A. Diego, M. Mudarra, J. Sellarès

Abstract: We have compared measurements of a set of polyethylene terephthalate (PET) electret samples by means of pulsed electroacoustic method (PEA) and thermally stimulated depolarization current (TSDC) techniques. Experimental parameters such as the combined thermal and electrical history and the electrode type have been selected in order to correlate the polarization mechanisms revealed by TSDC with the… ▽ More We have compared measurements of a set of polyethylene terephthalate (PET) electret samples by means of pulsed electroacoustic method (PEA) and thermally stimulated depolarization current (TSDC) techniques. Experimental parameters such as the combined thermal and electrical history and the electrode type have been selected in order to correlate the polarization mechanisms revealed by TSDC with the charge profile measured by PEA in five different cases. Existing deconvolution procedures for PEA have been improved as a means to enhance the calibration of PEA signals in the case of thin samples. Samples where the $α$ dipolar relaxation or the $ρ$ space charge relaxation is activated show a uniform polarization that manifests itself as image charge at the electrodes. In the experiments where external charge carriers are injected into the sample, the same poling procedure has been tested under different electrode configurations. Charge profiles are qualitatively similar in all of them but the depolarization currents show clearly different behavior. These differences are explained, on the one hand, by the different blocking behavior of vacuum-deposited aluminum electrodes with regards to electrodes with a thin air gap and, on the other hand, by the distinct behavior of electrodes with an air gap for both directions of the charge carriers. Numerical analysis of the polarization of TSDC peaks and charge per unit area of charge profiles supports this interpretation and confirms the relationship between both measurement techniques. All in all, PEA in combination with TSDC turns out to be a useful technique in the study of thermally poled electrets, either in the study of relaxations or of external charge. △ Less

Submitted 8 March, 2022; v1 submitted 31 March, 2021; originally announced March 2021.

Comments: 21 pages, 12 figures

Effects of UV radiation on the charge trap** capability of PET

Authors: J. C. Cañadas, J. A. Diego, M. Mudarra, S. E. Parsa, J. Sellarès

Abstract: Poly(ethylene terephthalate) (PET), as most dielectric materials, is able to retain space charge in traps. This allows the material to attain an almost-permanent polarization when space charge is displaced by an external electric field or it is injected from an electrode. We have studied the influence of UV irradiation on the charge trap** capability of PET in samples exposed for different perio… ▽ More Poly(ethylene terephthalate) (PET), as most dielectric materials, is able to retain space charge in traps. This allows the material to attain an almost-permanent polarization when space charge is displaced by an external electric field or it is injected from an electrode. We have studied the influence of UV irradiation on the charge trap** capability of PET in samples exposed for different periods of time, up to 10 weeks. The pulsed electro-acoustic technique (PEA) has been used to determine the charge profile. The injected charge that the material is able to retain on the irradiated surface increases with irradiation time. This indicates the formation of new traps. An extensive characterization of these localized states has been performed by thermally stimulated depolarization currents (TSDC) technique. Parameters of charge relaxation kinetics have been obtained fitting spectra of the $ρ_c$ peak, related to injected charge, to the general order kinetics model. A relaxation map analysis shows that relaxation times become more distributed and the activation energy decreases as irradiation time is increased. The activation energy decreases approximately by 10% after 10 weeks of exposition. These results show that UV irradiation creates additional traps on the treated surface, which agrees with PEA results, and that these traps are shallower and their energy depth distribution is wider than in the case of pre-existing traps. △ Less

Submitted 19 September, 2018; originally announced September 2018.

Comments: 21 pages, 10 figures, 6 tables

Sublinear dispersive conductivity in polyetherimides by the electric modulus formalism

Authors: M. Mudarra, J. Sellares, J. C. Canadas, J. A. Diego

Abstract: It can be seen by Dynamic Electrical Analysis that the electrical properties of polyetherimide at temperatures above the glass transition are strongly influenced by space charge. We have studied space charge relaxation in two commercial grades of polyetherimide, Ultem 1000 and Ultem 5000, using this technique. The electric modulus formalism has been used to interpret their conductive properties. I… ▽ More It can be seen by Dynamic Electrical Analysis that the electrical properties of polyetherimide at temperatures above the glass transition are strongly influenced by space charge. We have studied space charge relaxation in two commercial grades of polyetherimide, Ultem 1000 and Ultem 5000, using this technique. The electric modulus formalism has been used to interpret their conductive properties. In both grades of polyetherimide, asymmetric Argand plots are observed, which are related to a sublinear power-law dependency ($ω^{n}$ with $n<1$) in the real part of the conductivity. This behaviour is attributed to correlated ion hop**. The imaginary part of the electric modulus exhibits a peak in the low frequency range associated to conduction. Modelling of this peak allows us to obtain the dependence, among other parameters, of the conductivity ($σ_0$), the fractional exponent ($n$) and the crossover frequency ($ω_\mathrm{p}$) on the temperature. The $α$ relaxation, that appears at higher frequencies, has also to be modelled since it overlaps the conductivity relaxation. The study of the parameters in terms of the temperature allows us to identify the ones that are thermally activated. The difference between the conductivity relaxation time and the Maxwell relaxation time indicates the presence of deep traps. The coupling model points out that the correlation of the ionic motion diminishes with temperature, probably due to increasing disorder due to thermal agitation. △ Less

Submitted 24 July, 2013; originally announced July 2013.

Dielectric study of the glass transition of PET/PEN blends

Authors: J. Sellares, J. A. Diego, J. C. Canadas, M. Mudarra, J. Belana, P. Colomer, F. Roman, Y. Calventus

Abstract: An analysis of the glass transition of four materials with similar chemical structures is performed: PET, PEN and two PET/PEN blends (90/10 and 70/30 w/w). During the melt processing of the blends transesterification reactions yield block and random PET/PEN copolymers that act as compatibilizers. The blends obtained in this way have been characterized by 1H-NMR and DSC. A degree of randomness of 0… ▽ More An analysis of the glass transition of four materials with similar chemical structures is performed: PET, PEN and two PET/PEN blends (90/10 and 70/30 w/w). During the melt processing of the blends transesterification reactions yield block and random PET/PEN copolymers that act as compatibilizers. The blends obtained in this way have been characterized by 1H-NMR and DSC. A degree of randomness of 0.38 and 0.26 has been found for the 90/10 and 70/30 copolymers. It is shown by DSC that this copolimerization is enough to compatibilize the blends. The alpha relaxation, the dielectric manifestation of the glass transition, has been studied by thermally stimulated depolarization currents (TSDC). The relaxation has been analyzed into its elementary modes by means of a relaxation map analysis. The activation energies of the modes of the glass transition do not change significantly between the four materials: in all cases the modes with a larger contribution have around 3 eV and modes with less than 1 eV are not detected. The change in the pre-exponential factor accounts entirely for the relaxation time change from material to material, that is larger as the PEN content increases. The compensation law is fulfilled and compensation plots converge for high-frequency modes. The polarizability decreases as the PEN content increases due to the increased stiffness of the polymer backbone. An analysis of the cooperativity shows that the central modes of the distribution are the most cooperative while high-frequency modes tend to behave more as Arrhenius. The low-frequency modes are difficult to study due to the asymmetry of the distribution of relaxation times. PEN turns out to be the less cooperative material. It is demonstrated how the parameters obtained from the dielectric study are able to reproduce calorimetric data from DSC scans and are, therefore, a valid description of the glass transition. △ Less

Submitted 4 October, 2012; v1 submitted 23 July, 2012; originally announced July 2012.

Comments: 22 pages, 13 figures

Dielectric study of the glass transition: correlation with calorimetric data

Authors: J. A. Diego, J. Sellares, A. Aragoneses, J. C. Canadas, M. Mudarra, J. Belana

Abstract: The glass transition in amorphous poly(ethylene terephthalate) is studied by thermally stimulated depolarization currents (TSDC) and differential scanning calorimetry (DSC). The ability of TSDC to decompose a distributed relaxation, as the glass transition, into its elementary components is demonstrated. Two polarization techniques, windows polarization (WP) and non-isothermal windows polarizati… ▽ More The glass transition in amorphous poly(ethylene terephthalate) is studied by thermally stimulated depolarization currents (TSDC) and differential scanning calorimetry (DSC). The ability of TSDC to decompose a distributed relaxation, as the glass transition, into its elementary components is demonstrated. Two polarization techniques, windows polarization (WP) and non-isothermal windows polarization (NIW), are employed to assess the influence of thermal history in the results. The Tool-Narayanaswami-Moynihan (TNM) model has been used to fit the TSDC spectra. The most important contributions to the relaxation comes from modes with non-linearity (x) around 0.7. Activation energies yield by this model are located around 1eV for polarization temperature (Tp) below 50C and they raise up to values higher than 8eV as Tp increases (up to 80C). There are few differences between results obtained with WP and NIW but, nonetheless, these are discussed. The obtained kinetic parameters are tested against DSC results in several conditions. Calculated DSC curves at several cooling and heating rates can reproduce qualitatively experimental DSC results. These results also demonstrate that modelization of the non-equilibrium kinetics involved in TSDC spectroscopy is a useful experimental tool for glass transition studies in polar polymers. △ Less

Submitted 27 July, 2006; v1 submitted 25 July, 2006; originally announced July 2006.

Comments: 13 pages, 2 tables, 10 figures; minor changes

Application of the Tool--Narayanaswamy--Moynihan model to the study of the alpha relaxation by thermally stimulated depolarization currents

Authors: J. Sellares, J. C. Canadas, J. A. Diego, M. Mudarra, J. Belana

Abstract: The dielectric alpha relaxation is the dielectric manifestation of the glass transition. In spite of this fact, the more commonly used models, the Arrhenius model and the Williams--Landel--Ferry model, do not take into account the structural state of the system to modelize this relaxation. In thermally stimulated discharge current (TSDC) experiments, the sample is out of equilibrium during most… ▽ More The dielectric alpha relaxation is the dielectric manifestation of the glass transition. In spite of this fact, the more commonly used models, the Arrhenius model and the Williams--Landel--Ferry model, do not take into account the structural state of the system to modelize this relaxation. In thermally stimulated discharge current (TSDC) experiments, the sample is out of equilibrium during most of the discharge ramp. Not surprisingly, the capability of these models to represent the data points at temperatures well below the glass transition temperature is very poor. To overcome this limitation, we have used the Tool--Narayanaswamy-Moynihan (TNM) model, that takes into account the structural state of the system, to modelize TSDC data. Although it is mostly applied to calorimetric and volumetric experiments we show how it can be employed on dielectric data. The numerical results support the applicability of the model and suggest how the dielectric and the structural relaxation times may be related. The TNM model turns out to be physically sound since the modelization of dielectric data gives also a reasonable structural kinetics of the system. The qualitative differences between the TNM model and the equilibrium models for different TSDC experiments is discussed. Experimental data coming from TSDC experiments where the thermal history of the sample is changed do not provide additional evidence but nevertheless are compatible with the parameter values that were obtained in the fits to the TNM model. △ Less

Submitted 31 March, 2005; originally announced March 2005.

Comments: 15 pages, 10 figures