-
The PLATO Mission
Authors:
Heike Rauer,
Conny Aerts,
Juan Cabrera,
Magali Deleuil,
Anders Erikson,
Laurent Gizon,
Mariejo Goupil,
Ana Heras,
Jose Lorenzo-Alvarez,
Filippo Marliani,
Cesar Martin-Garcia,
J. Miguel Mas-Hesse,
Laurence O'Rourke,
Hugh Osborn,
Isabella Pagano,
Giampaolo Piotto,
Don Pollacco,
Roberto Ragazzoni,
Gavin Ramsay,
Stéphane Udry,
Thierry Appourchaux,
Willy Benz,
Alexis Brandeker,
Manuel Güdel,
Eduardo Janot-Pacheco
, et al. (801 additional authors not shown)
Abstract:
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observati…
▽ More
PLATO (PLAnetary Transits and Oscillations of stars) is ESA's M3 mission designed to detect and characterise extrasolar planets and perform asteroseismic monitoring of a large number of stars. PLATO will detect small planets (down to <2 R_(Earth)) around bright stars (<11 mag), including terrestrial planets in the habitable zone of solar-like stars. With the complement of radial velocity observations from the ground, planets will be characterised for their radius, mass, and age with high accuracy (5 %, 10 %, 10 % for an Earth-Sun combination respectively). PLATO will provide us with a large-scale catalogue of well-characterised small planets up to intermediate orbital periods, relevant for a meaningful comparison to planet formation theories and to better understand planet evolution. It will make possible comparative exoplanetology to place our Solar System planets in a broader context. In parallel, PLATO will study (host) stars using asteroseismology, allowing us to determine the stellar properties with high accuracy, substantially enhancing our knowledge of stellar structure and evolution.
The payload instrument consists of 26 cameras with 12cm aperture each. For at least four years, the mission will perform high-precision photometric measurements. Here we review the science objectives, present PLATO's target samples and fields, provide an overview of expected core science performance as well as a description of the instrument and the mission profile at the beginning of the serial production of the flight cameras. PLATO is scheduled for a launch date end 2026. This overview therefore provides a summary of the mission to the community in preparation of the upcoming operational phases.
△ Less
Submitted 8 June, 2024;
originally announced June 2024.
-
2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Narsireddy Anugu,
Rodrigo Amezcua-Correa,
Ritoban Basu Thakur,
Charles Beichman,
Chad Bender,
Jean-Philippe Berger,
Azzurra Bigioli,
Joss Bland-Hawthorn,
Guillaume Bourdarot,
Charles M. Bradford,
Ronald Broeke,
Julia Bryant,
Kevin Bundy,
Ross Cheriton,
Nick Cvetojevic,
Momen Diab,
Scott A. Diddams,
Aline N. Dinkelaker,
Jeroen Duis,
Stephen Eikenberry,
Simon Ellis,
Akira Endo,
Donald F. Figer
, et al. (55 additional authors not shown)
Abstract:
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio…
▽ More
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
CHARA/SPICA: a 6-telescope visible instrument for the CHARA Array
Authors:
Denis Mourard,
Philippe Berio,
Cyril Pannetier,
Nicolas Nardetto,
Fatme Allouche,
Christophe Bailet,
Julien Dejonghe,
Pierre Geneslay,
Estelle Jacqmart,
Stéphane Lagarde,
Daniel Lecron,
Frédéric Morand,
Sylvain Rousseau,
David Salabert,
Alain Spang,
Simon Albrecht,
Narsireddy Anugu,
Laurent Bourges,
Theo A. ten Brummelaar,
Orlagh Creevey,
Sebastien Deheuvels,
Armando Domiciano de Souza,
Doug Gies,
Roxanne Ligi,
Guillaume Mella
, et al. (3 additional authors not shown)
Abstract:
With a possible angular resolution down to 0.1-0.2 millisecond of arc using the 330 m baselines and the access to the 600-900 nm spectral domain, the CHARA Array is ideally configured for focusing on precise and accurate fundamental parameters of stars. CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) aims at performing a large survey of stars all over the Hertzsprung-Russell diag…
▽ More
With a possible angular resolution down to 0.1-0.2 millisecond of arc using the 330 m baselines and the access to the 600-900 nm spectral domain, the CHARA Array is ideally configured for focusing on precise and accurate fundamental parameters of stars. CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) aims at performing a large survey of stars all over the Hertzsprung-Russell diagram. This survey will also study the effects of the different kinds of variability and surface structure on the reliability of the extracted fundamental parameters. New surface-brightness-colour relations will be extracted from this survey, for general purposes on distance determination and the characterization of faint stars. SPICA is made of a visible 6T fibered instrument and of a near-infrared fringe sensor. In this paper, we detail the science program and the main characteristics of SPICA-VIS. We present finally the initial performance obtained during the commissioning.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
SPICA-FT: The new fringe tracker of the CHARA array
Authors:
Cyril Pannetier,
Philippe Berio,
Denis Mourard,
Sylvain Rousseau,
Fatme Allouche,
Julien Dejonghe,
Christophe Bailet,
Daniel Lecron,
Frédéric Cassaing,
Jean-Baptiste Le Bouquin,
Karine Perraut,
John D. Monnier,
Narsireddy Anugu,
Theo ten Brummelaar
Abstract:
SPICA-FT is part of the CHARA/SPICA instrument which combines a visible 6T fibered instrument (SPICAVIS) with a H-band 6T fringe sensor. SPICA-FT is a pairwise ABCD integrated optics combiner. The chip is installed in the MIRC-X instrument. The MIRC-X spectrograph could be fed either by the classical 6T fibered combiner or by the SPICA-FT integrated optics combiner. SPICA-FT also integrates a dedi…
▽ More
SPICA-FT is part of the CHARA/SPICA instrument which combines a visible 6T fibered instrument (SPICAVIS) with a H-band 6T fringe sensor. SPICA-FT is a pairwise ABCD integrated optics combiner. The chip is installed in the MIRC-X instrument. The MIRC-X spectrograph could be fed either by the classical 6T fibered combiner or by the SPICA-FT integrated optics combiner. SPICA-FT also integrates a dedicated fringe tracking software, called the opd-controller communicating with the main delay line through a dedicated channel. We present the design of the integrated optics chip, its implementation in MIRC-X and the software architecture of the group-delay and phase-delay control loops. The final integrated optics chip and the software have been fully characterized in the laboratory. First on-sky tests of the integrated optics combiner began in 2020. We continue the on-sky tests of the whole system (combiner + software) in Spring and Summer 2022. We present the main results, and we deduce the preliminary performance of SPICA-FT.
△ Less
Submitted 17 October, 2022;
originally announced October 2022.
-
Theoretical analysis of surface brightness-colour relations for late-type stars using MARCS model atmospheres
Authors:
A. Salsi,
N. Nardetto,
B. Plez,
D. Mourard
Abstract:
Surface brightness-colour relations (SBCRs) are largely used for general studies in stellar astrophysics and for determining extragalactic distances. Based on simulated spectra of late-type stars using MARCS model atmospheres, our aim is to analyse the effect of stellar fundamental parameters on the surface brightness. We also compare theoretical and recent empirical SBCRs. We used MARCS model atm…
▽ More
Surface brightness-colour relations (SBCRs) are largely used for general studies in stellar astrophysics and for determining extragalactic distances. Based on simulated spectra of late-type stars using MARCS model atmospheres, our aim is to analyse the effect of stellar fundamental parameters on the surface brightness. We also compare theoretical and recent empirical SBCRs. We used MARCS model atmospheres to compute spectra and the surface brightness of stars. We first explored the parameter space of MARCS (i.e. effective temperature, $\log g$, $\mathrm{[Fe/H]}$, microturbulence, and mass) in order to quantify their impact on the surface brightness. Then we considered a relation between the effective temperature and $\log g$ for late dwarfs and giants, as well as a solar metallicity, in order to allow a consistent comparison of theoretical and empirical SBCRs. We find that the SBCR is not sensitive to the microturbulence and mass. The effect of metallicity on the SBCR is found to be larger for dwarfs than for giants. It is also larger when considering larger $V-K_s$ values. We also find that a difference of 0.5 dex in metallicity between Galactic and LMC SBCRs does not affect the recent LMC distance determination, based on eclipsing binaries, by more than 0.4%. By comparing theoretical with empirical SBCRs, we find a good agreement of less than 2$σ$ for F5-K7 dwarfs and giants stars, while a larger discrepancy is found for M dwarfs and giants (about 4-6$σ$). The surface gravity properties, as modelled in MARCS, explain the differences in the empirical SBCRs in terms of class. We finally find that theoretical and empirical SBCRs for Cepheids are consistent. Carefully considering metallicity and $\log g$ is mandatory when calibrating or using SBCRs.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
The SAPP pipeline for the determination of stellar abundances and atmospheric parameters of stars in the core program of the PLATO mission
Authors:
Matthew Raymond Gent,
Maria Bergemann,
Aldo Serenelli,
Luca Casagrande,
Jeffrey M. Gerber,
Ulrike Heiter,
Mikhail Kovalev,
Thierry Morel,
Nicolas Nardetto,
Vardan Adibekyan,
Víctor Silva Aguirre,
Martin Asplund,
Kevin Belkacem,
Carlos del Burgo,
Lionel Bigot,
Andrea Chiavassa,
Luisa Fernanda Rodríguez Díaz,
Marie-Jo Goupil,
Jonay I. González Hernández,
Denis Mourard,
Thibault Merle,
Szabolcs Mészáros,
Douglas J. Marshall,
Rhita-Maria Ouazzani,
Bertrand Plez
, et al. (3 additional authors not shown)
Abstract:
We introduce the SAPP (Stellar Abundances and atmospheric Parameters Pipeline), the prototype of the code that will be used to determine parameters of stars observed within the core program of the PLATO space mission. The pipeline is based on the Bayesian inference and provides effective temperature, surface gravity, metallicity, chemical abundances, and luminosity. The code in its more general ve…
▽ More
We introduce the SAPP (Stellar Abundances and atmospheric Parameters Pipeline), the prototype of the code that will be used to determine parameters of stars observed within the core program of the PLATO space mission. The pipeline is based on the Bayesian inference and provides effective temperature, surface gravity, metallicity, chemical abundances, and luminosity. The code in its more general version can have a much wider range of applications. It can also provide masses, ages, and radii of stars and can be used for stars of stellar types not targeted by the PLATO core program, such as red giants. We validate the code on a set of 27 benchmark stars that includes 19 FGK-type dwarfs, 6 GK-type sub-giants, and 2 red giants. Our results suggest that combining various observables is the optimal approach, as it allows to break degeneracies between different parameters and yields more accurate values of stellar parameters and more realistic uncertainties. For the PLATO core sample, we obtain a typical uncertainty of 27 ($\rm{syst.}$) $\pm$ 37 ($\rm{stat.}$) K for T$_{\rm{eff}}$, 0.00 $\pm$ 0.01 dex for log$g$, 0.02 $\pm$ 0.02 dex for metallicity [Fe/H], -0.01 $\pm$ 0.03 R$_\odot$ for radii, -0.01 $\pm$ 0.05 M$_\odot$ for stellar masses, and -0.14 $\pm$ 0.63 Gyrs for ages. We also show that the best results are obtained by combining the $ν_{max}$ scaling relation and stellar spectra. This resolves the notorious problem of degeneracies, which is particularly important for F-type stars.
△ Less
Submitted 20 January, 2022; v1 submitted 12 November, 2021;
originally announced November 2021.
-
Compensation of differential dispersion: application to multiband stellar interferometry
Authors:
Cyril Pannetier,
Denis Mourard,
Frédéric Cassaing,
Stéphane Lagarde,
Jean-Baptiste Le Bouquin,
John Monnier,
Judit Sturmann,
Theo Ten Brummelaar
Abstract:
With the aim of pushing the limiting magnitude of interferometric instruments, the need for wide-band detection channels and for a coordinated operation of different instruments has considerably grown in the field of long-baseline interferometry. For this reason, the Center for High Angular Resolution Astronomy (CHARA), an array of six telescopes, requires a new configuration of longitudinal dispe…
▽ More
With the aim of pushing the limiting magnitude of interferometric instruments, the need for wide-band detection channels and for a coordinated operation of different instruments has considerably grown in the field of long-baseline interferometry. For this reason, the Center for High Angular Resolution Astronomy (CHARA), an array of six telescopes, requires a new configuration of longitudinal dispersion compensators to keep the fringe contrast above 95 per cent simultaneously in all spectral bands, while preserving the transmission above 85 per cent. In this paper, we propose a new method for defining the longitudinal dispersion compensators (LDC) suited for multiband observations. A literal approximation of the contrast loss resulting from the dispersion residues enables us to define a general criterion for fringe contrast maximization on several bands simultaneously. The optimization of this criterion leads to a simple solution with only two LDC stages per arm and existing differential delay lines, to the glass choice and a simple linear formula for thickness control of all these media. A refined criterion can also take into account glass transmission. After presenting this criterion, we give the optimal solution (medium, configuration) and its expected performance for the planned observing modes on CHARA.
△ Less
Submitted 15 September, 2021;
originally announced September 2021.
-
Directly Determined Properties of HD 97658 from Interferometric Observations
Authors:
Tyler G. Ellis,
Tabetha Boyajian,
Kaspar von Braun,
Roxanne Ligi,
Denis Mourard,
Diana Dragomir,
Gail H. Schaefer,
Christopher D. Farrington
Abstract:
We conducted interferometric observations with the CHARA Array of transiting super-Earth host HD 97658 and measured its limb-darkened angular diameter to be $θ_{\text{LD}}=0.314\pm0.004$ mas. The combination of the angular diameter with the Gaia EDR3 parallax value with zero-point correction ($π=46.412\pm0.022$ mas, $d=21.546\pm0.011$ pc) yields a physical radius of $R_\star=0.728\pm0.008$…
▽ More
We conducted interferometric observations with the CHARA Array of transiting super-Earth host HD 97658 and measured its limb-darkened angular diameter to be $θ_{\text{LD}}=0.314\pm0.004$ mas. The combination of the angular diameter with the Gaia EDR3 parallax value with zero-point correction ($π=46.412\pm0.022$ mas, $d=21.546\pm0.011$ pc) yields a physical radius of $R_\star=0.728\pm0.008$ $R_\odot$. We also measured the bolometric flux of the star to be $F_\text{bol}=2.42\pm 0.05\times 10^{-8}$erg s$^{-1}$ cm$^{-2}$, which, together with angular size, allows a measurement of the effective temperature $T_{\text{eff}}=5212\pm43$ K. Our directly determined physical stellar properties are in good agreement with previous estimates derived from spectroscopy. We used our measurements in combination with stellar evolutionary models and properties of the transit of HD 97658 b to determine the mass and age of HD 97658 as well as constrain the properties of the planet. Our results and our analysis of the TESS lightcurve on the planet (TOI-1821) corroborate previous studies of this system with tighter uncertainties.
△ Less
Submitted 25 August, 2021; v1 submitted 13 July, 2021;
originally announced July 2021.
-
Progress on the calibration of surface brightness-color relations for early- and late-type stars
Authors:
Anthony Salsi,
Nicolas Nardetto,
Denis Mourard,
Dariusz Graczyk,
Monica Taormina,
Orlagh Creevey,
Vincent Hocdé,
Frédéric Morand,
Karine Perraut,
Grzegorz Pietrzynski,
Gail H. Schaefer
Abstract:
Surface brightness-color relations (SBCRs) are used for estimating angular diameters and deriving stellar properties. They are critical to derive extragalactic distances of early-type and late-type eclipsing binaries or, potentially, for extracting planetary parameters of late-type stars hosting planets. Various SBCRs have been implemented so far, but strong discrepancies in terms of precision and…
▽ More
Surface brightness-color relations (SBCRs) are used for estimating angular diameters and deriving stellar properties. They are critical to derive extragalactic distances of early-type and late-type eclipsing binaries or, potentially, for extracting planetary parameters of late-type stars hosting planets. Various SBCRs have been implemented so far, but strong discrepancies in terms of precision and accuracy still exist in the literature. We aim to develop a precise SBCR for early-type B and A stars using selection criteria, based on stellar characteristics, and combined with homogeneous interferometric angular diameter measurements. We also improve SBCRs for late-type stars, in particular in the Gaia photometric band. We observed 18 early-type stars with the VEGA interferometric instrument, installed on the CHARA array. We then applied additional criteria on the photometric measurements, together with stellar characteristics diagnostics in order to build the SBCRs. We calibrated a SBCR for subgiant and dwarf early-type stars. The RMS of the relation is $σ_{F_{V_{0}}} = 0.0051\,$mag, leading to an average precision of 2.3% on the estimation of angular diameters, with 3.1% for $V-K < -0.2\,$mag and 1.8% for $V-K > -0.2\,$mag. We found that the conversion between Johnson-$K$ and 2MASS-$K_s$ photometries is a key issue for early-type stars. Following this result, we have revisited our previous SBCRs for late-type stars by calibrating them with either converted Johnson-$K$ or 2MASS-$K_s$ photometries. We also improve the calibration of these SBCRs based on the Gaia photometry. The expected precision on the angular diameter using our SBCRs for late-type stars ranges from 1.0% to 2.7%. By reaching a precision of 2.3% on the estimation of angular diameters for early-type stars, significant progress has been made to determine extragalactic distances using early-type eclipsing binaries.
△ Less
Submitted 17 June, 2021; v1 submitted 2 June, 2021;
originally announced June 2021.
-
Progress of the CHARA/SPICA project
Authors:
C. Pannetier,
D. Mourard,
P. Berio,
F. Cassaing,
F. Allouche,
N. Anugu,
C. Bailet,
T. ten Brummelaar,
J. Dejonghe,
D. Gies,
L. Jocou,
S. Kraus,
S. Lacour,
S. Lagarde,
J. B. Le Bouquin,
D. Lecron,
J. Monnier,
N. Nardetto,
F. Patru,
K. Perraut,
R. Petrov,
S. Rousseau,
P. Stee,
J. Sturmann,
L. Sturmann
Abstract:
CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) is currently being developed at Observatoire de la Côte d'Azur. It will be installed at the visible focus of the CHARA Array by the end of 2021. It has been designed to perform a large survey of fundamental stellar parameters with, in the possible cases, a detailed imaging of the surface or environment of stars. To reach the require…
▽ More
CHARA/SPICA (Stellar Parameters and Images with a Cophased Array) is currently being developed at Observatoire de la Côte d'Azur. It will be installed at the visible focus of the CHARA Array by the end of 2021. It has been designed to perform a large survey of fundamental stellar parameters with, in the possible cases, a detailed imaging of the surface or environment of stars. To reach the required precision and sensitivity, CHARA/SPICA combines a low spectral resolution mode R = 140 in the visible and single-mode fibers fed by the AO stages of CHARA. This setup generates additional needs before the interferometric combination: the compensation of atmospheric refraction and longitudinal dispersion, and the fringe stabilization. In this paper, we present the main features of the 6-telescopes fibered visible beam combiner (SPICA-VIS) together with the first laboratory and on-sky results of the fringe tracker (SPICA-FT). We describe also the new fringe-tracker simulator developed in parallel to SPICA-FT.
△ Less
Submitted 26 January, 2021;
originally announced January 2021.
-
CHARA Array adaptive optics: complex operational software and performance
Authors:
Narsireddy Anugu,
Theo ten Brummelaar,
Nils H. Turner,
Matthew D. Anderson,
Jean-Baptiste Le Bouquin,
Judit Sturmann,
Laszlo Sturmann,
Chris Farrington,
Norm Vargas,
Olli Majoinen,
Michael J. Ireland,
John D. Monnier,
Denis Mourard,
Gail Schaefer,
Douglas R. Gies,
Stephen T. Ridgway,
Stefan Kraus,
Cyril Petit,
Michel Tallon,
Caroline B. Lim,
Philippe Berio
Abstract:
The CHARA Array is the longest baseline optical interferometer in the world. Operated with natural seeing, it has delivered landmark sub-milliarcsecond results in the areas of stellar imaging, binaries, and stellar diameters. However, to achieve ambitious observations of faint targets such as young stellar objects and active galactic nuclei, higher sensitivity is required. For that purpose, adapti…
▽ More
The CHARA Array is the longest baseline optical interferometer in the world. Operated with natural seeing, it has delivered landmark sub-milliarcsecond results in the areas of stellar imaging, binaries, and stellar diameters. However, to achieve ambitious observations of faint targets such as young stellar objects and active galactic nuclei, higher sensitivity is required. For that purpose, adaptive optics are developed to correct atmospheric turbulence and non-common path aberrations between each telescope and the beam combiner lab. This paper describes the AO software and its integration into the CHARA system. We also report initial on-sky tests that demonstrate an increase of scientific throughput by sensitivity gain and by extending useful observing time in worse seeing conditions. Our 6 telescopes and 12 AO systems with tens of critical alignments and control loops pose challenges in operation. We describe our methods enabling a single scientist to operate the entire system.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
Optically thin circumstellar medium in $β$ Lyr A system
Authors:
M. Brož,
D. Mourard,
J. Budaj,
P. Harmanec,
H. Schmitt,
I. Tallon-Bosc,
D. Bonneau,
H. Božić,
D. Gies,
M. Šlechta
Abstract:
beta Lyr A is a complex binary system with an extensive observational dataset: light curves (from FUV to FIR), interferometric squared visibility, closure phase, triple product measurements, spectral-energy distribution (SED), high-resolution spectroscopy, differential visibility amplitude, and also differential phase. In particular, we use spectra from Ondrejov 2m telescope from 2013 to 2015, to…
▽ More
beta Lyr A is a complex binary system with an extensive observational dataset: light curves (from FUV to FIR), interferometric squared visibility, closure phase, triple product measurements, spectral-energy distribution (SED), high-resolution spectroscopy, differential visibility amplitude, and also differential phase. In particular, we use spectra from Ondrejov 2m telescope from 2013 to 2015, to measure the emission in Halpha, HeI, SiII, NeI, or CII lines, and differential interferometry by CHARA/VEGA from the 2013 campaign to measure wavelength-dependent sizes across Halpha and HeI 6678. This allows us to constrain not only optically thick objects (primary, secondary, accretion disk), but also optically thin objects (disk atmosphere, jets, shell). We extended our modelling tool Pyshellspec (based on Shellspec; a 1D LTE radiative transfer code) to include all new observables, to compute differential visibilities/phases, to perform a Doppler tomography, and to determine a joint chi^2 metric. After an optimisation of 38 free parameters, we derive a robust model of the beta Lyr A system. According to the model, the emission is formed in an extended atmosphere of the disk, two perpendicular jets expanding at ~700 km s^-1, and a symmetric shell with the radius ~70 R_S. The spectroscopy indicates a low abundance of carbon, 10^-2 of the solar value. We also quantify systematic differences between datasets and discuss alternative models, with higher resolution, additional asymmetries, or He-rich abundance.
△ Less
Submitted 12 October, 2020;
originally announced October 2020.
-
Precise calibration of the dependence of surface brightness-colour relations on colour and class for late-type stars
Authors:
A. Salsi,
N. Nardetto,
D. Mourard,
O. Creevey,
D. Huber,
T. R. White,
V. Hocdé,
F. Morand,
I. Tallon-Bosc,
C. D. Farrington,
A. Chelli,
G. Duvert
Abstract:
Surface brightness-colour relations (SBCRs) are used to derive the stellar angular diameters from photometric observations. They have various astrophysical applications, such as the distance determination of eclipsing binaries or the determination of exoplanet parameters. However, strong discrepancies between the SBCRs still exist in the literature, in particular for early and late-type stars. We…
▽ More
Surface brightness-colour relations (SBCRs) are used to derive the stellar angular diameters from photometric observations. They have various astrophysical applications, such as the distance determination of eclipsing binaries or the determination of exoplanet parameters. However, strong discrepancies between the SBCRs still exist in the literature, in particular for early and late-type stars. We aim to calibrate new SBCRs as a function of the spectral type and the luminosity class of the stars. Our goal is also to apply homogeneous criteria to the selection of the reference stars and in view of compiling an exhaustive and up-to-date list of interferometric late-type targets. We implemented criteria to select measurements in the JMMC Measured Diameters Catalog (JMDC). We then applied additional criteria on the photometric measurements used to build the SBCRs, together with stellar characteristics diagnostics. We built SBCRs for F5/K7-II/III, F5/K7-IV/V, M-II/III and M-V stars, with respective RMS of $σ_{F_{V}} = 0.0022$ mag, $σ_{F_{V}} = 0.0044$ mag, $σ_{F_{V}} = 0.0046$ mag, and $σ_{F_{V}} = 0.0038$ mag. This results in a precision on the angular diameter of 1.0\%, 2.0\%, 2.1\%, and 1.7\%, respectively. These relations cover a large $V-K$ colour range of magnitude, from 1 to 7.5. Our work demonstrates that SBCRs are significantly dependent on the spectral type and the luminosity class of the star. Through a new set of interferometric measurements, we demonstrate the critical importance of the selection criteria proposed for the calibration of SBCR. Finally, using the Gaia photometry for our samples, we obtained (G-K) SBCRs with a precision on the angular diameter between 1.1\% and 2.4\%.
△ Less
Submitted 3 July, 2020;
originally announced July 2020.
-
Calibrating the surface brightness - color relation for late-type red giants stars in the visible domain using VEGA/CHARA interferometric observations
Authors:
N. Nardetto,
A. Salsi,
D. Mourard,
V. Hocde,
K. Perraut,
A. Gallenne,
A. Merand,
D. Graczyk,
G. Pietrzynski,
W. Gieren,
P. Kervella,
R. Ligi,
A. Meilland,
F. Morand,
P. Stee,
I. Tallon-Bosc,
T. ten~Brummelaar
Abstract:
The surface brightness - color relationship (SBCR) is a poweful tool for determining the angular diameter of stars from photometry. It was for instance used to derive the distance of eclipsing binaries in the Large Magellanic Cloud (LMC), which led to its distance determination with an accuracy of 1%. We calibrate the SBCR for red giant stars in the 2.1 < V-K < 2.5 color range using homogeneous VE…
▽ More
The surface brightness - color relationship (SBCR) is a poweful tool for determining the angular diameter of stars from photometry. It was for instance used to derive the distance of eclipsing binaries in the Large Magellanic Cloud (LMC), which led to its distance determination with an accuracy of 1%. We calibrate the SBCR for red giant stars in the 2.1 < V-K < 2.5 color range using homogeneous VEGA/CHARA interferometric data secured in the visible domain, and compare it to the relation based on infrared interferometric observations, which were used to derive the distance to the LMC. Observations of eight G-K giants were obtained with the VEGA/CHARA instrument. The derived limb-darkened angular diameters were combined with a homogeneous set of infrared magnitudes in order to constrain the SBCR. The average precision we obtain on the limb-darkened angular diameters of the eight stars in our sample is 2.4%. For the four stars in common observed by both VEGA/CHARA and PIONIER/VLTI, we find a 1 sigma agreement for the angular diameters. The SBCR we obtain in the visible has a dispersion of 0.04 magnitude and is consistent with the one derived in the infrared (0.018 magnitude). The consistency of the infrared and visible angular diameters and SBCR reinforces the result of 1% precision and accuracy recently achieved on the distance of the LMC using the eclipsing-binary technique. It also indicates that it is possible to combine interferometric observations at different wavelengths when the SBCR is calibrated.
△ Less
Submitted 30 June, 2020;
originally announced June 2020.
-
Optical interferometry and Gaia measurement uncertainties reveal the physics of asymptotic giant branch stars
Authors:
A. Chiavassa,
K. Kravchenko,
F. Millour,
G. Schaefer,
M. Schultheis,
B. Freytag,
O. Creevey,
V. Hocdé,
F. Morand,
R. Ligi,
S. Kraus,
J. D. Monnier,
D. Mourard,
N. Nardetto,
N. Anugu,
J. -B. Le Bouquin,
C. L. Davies,
J. Ennis,
T. Gardner,
A. Labdon,
C. Lanthermann,
B. R. Setterholm,
T. ten Brummelaar
Abstract:
Context. Asymptotic giant branch stars are cool luminous evolved stars that are well observable across the Galaxy and populating Gaia data. They have complex stellar surface dynamics Aims. On the AGB star CL Lac, it has been shown that the convection-related variability accounts for a substantial part of the Gaia DR2 parallax error. We observed this star with the MIRC-X beam combiner installed at…
▽ More
Context. Asymptotic giant branch stars are cool luminous evolved stars that are well observable across the Galaxy and populating Gaia data. They have complex stellar surface dynamics Aims. On the AGB star CL Lac, it has been shown that the convection-related variability accounts for a substantial part of the Gaia DR2 parallax error. We observed this star with the MIRC-X beam combiner installed at the CHARA interferometer to detect the presence of stellar surface inhomogeneities. Methods. We performed the reconstruction of aperture synthesis images from the interferometric observations at different wavelengths. Then, we used 3D radiative hydrodynamics simulations of stellar convection with CO5BOLD and the post-processing radiative transfer code Optim3D to compute intensity maps in the spectral channels of MIRC-X observations. Then, we determined the stellar radius and compared the 3D synthetic maps to the reconstructed ones focusing on matching the intensity contrast, the morphology of stellar surface structures, and the photocentre position at two different spectral channels, 1.52 and 1.70 micron, simultaneously. Results. We measured the apparent diameter of CL Lac at two wavelengths and recovered the radius using a Gaia parallax. In addition to this, the reconstructed images are characterised by the presence of a brighter area that largely affects the position of the photocentre. The comparison with 3D simulation shows good agreement with the observations both in terms of contrast and surface structure morphology, meaning that our model is adequate for explaining the observed inhomogenities. Conclusions. This work confirms the presence of convection-related surface structures on an AGB star of Gaia DR2. Our result will help us to take a step forward in exploiting Gaia measurement uncertainties to extract the fundamental properties of AGB stars using appropriate RHD simulations.
△ Less
Submitted 12 June, 2020;
originally announced June 2020.
-
Visible and near-infrared spectro-interferometric analysis of the edge-on Be star $ο$ Aquarii
Authors:
E. S. G. de Almeida,
A. Meilland,
A. Domiciano de Souza,
P. Stee,
D. Mourard,
N. Nardetto,
R. Ligi,
I. Tallon-Bosc,
D. M. Faes,
A. C. Carciofi,
D. Bednarski,
B. C. Mota,
N. Turner,
T. A. ten Brummelaar
Abstract:
We present a detailed visible and near-IR spectro-interferometric analysis of the Be-shell star $ο$ Aquarii from quasi-contemporaneous CHARA/VEGA and VLTI/AMBER observations. We measured the stellar radius of $ο$ Aquarii as 4.0 $\pm$ 0.3 $\mathrm{R_{\odot}}$. We constrained the disk geometry and kinematics using a kinematic model and a MCMC fitting procedure. The disk sizes in H$α$ and Br$γ$ were…
▽ More
We present a detailed visible and near-IR spectro-interferometric analysis of the Be-shell star $ο$ Aquarii from quasi-contemporaneous CHARA/VEGA and VLTI/AMBER observations. We measured the stellar radius of $ο$ Aquarii as 4.0 $\pm$ 0.3 $\mathrm{R_{\odot}}$. We constrained the disk geometry and kinematics using a kinematic model and a MCMC fitting procedure. The disk sizes in H$α$ and Br$γ$ were found to be similar, at $\sim$10-12 $\mathrm{D_{\star}}$, which is uncommon since most results for Be stars show a larger extension in H$α$ than in Br$γ$. We found that the inclination angle $i$ derived from H$α$ is significantly lower ($\sim$15 deg) than the one derived from Br$γ$. The disk kinematics were found to be near to the Keplerian rotation in Br$γ$, but not in H$α$. After analyzing all our data using a grid of HDUST models (BeAtlas), we found a common physical description for the disk in both lines: $Σ_{0}$ = 0.12 g cm\textsuperscript{-2} and $m$ = 3.0. The stellar rotational rate was found to be very close ($\sim$96\%) to the critical value. Our analysis of multi-epoch H$α$ profiles and imaging polarimetry indicates that the disk has been stable for at least 20 years. Compared to Br$γ$, the data in H$α$ shows a substantially different picture that cannot fully be understood using the current physical models of Be star disks. $ο$ Aquarii presents a stable disk, but the measured $m$ is lower than the standard value in the VDD model for steady-state. Such long-term stability can be understood in terms of the high rotational rate for this star, the rate being a main source for the mass injection in the disk. Our results on the stellar rotation and disk stability are consistent with results in the literature showing that late-type Be stars are more likely to be fast rotators and have stable disks.
△ Less
Submitted 21 February, 2020;
originally announced February 2020.
-
From the stellar properties of HD219134 to the internal compositions of its transiting exoplanets
Authors:
Roxanne Ligi,
Caroline Dorn,
Aurélien Crida,
Yveline Lebreton,
Orlagh Creevey,
Francesco Borsa,
Denis Mourard,
Nicolas Nardetto,
Isabelle Tallon-Bosc,
Frédéric Morand,
Ennio Poretti
Abstract:
The harvest of exoplanet discoveries has opened the area of exoplanet characterisation. But this cannot be achieved without a careful analysis of the host star parameters. The system of HD219134 hosts two transiting exoplanets and at least two additional non-transiting exoplanets. We used the VEGA/CHARA interferometer to measure the angular diameter of HD219134, leading to a stellar radius of…
▽ More
The harvest of exoplanet discoveries has opened the area of exoplanet characterisation. But this cannot be achieved without a careful analysis of the host star parameters. The system of HD219134 hosts two transiting exoplanets and at least two additional non-transiting exoplanets. We used the VEGA/CHARA interferometer to measure the angular diameter of HD219134, leading to a stellar radius of $R_{\star}=0.726\pm0.014 R_{\odot}$. We also derived the stellar density from the transits light curves ($ρ_{\star}=1.82\pm0.19 ρ_{\odot}$), which finally gives a direct estimate of the mass ($M_{\star}=0.696\pm0.078 M_{\odot}$) with a correlation of 0.46 between $R_{\star}$ and $M_{\star}$. This new mass is smaller than that derived from the C2kSMO stellar evolutionary model, which provides a mass range of 0.755$-$0.810 ($\pm 0.040$) $M_{\odot}$. This allows us to infer the mass, radius and density of the two transiting exoplanets of the system. We then use an inference model to obtain the internal parameters of these two transiting exoplanets. Moreover, we find that planet $b$ and $c$ have smaller radii than previously estimated ($1.500\pm0.057$ and $1.415\pm0.049 R_{\oplus}$, respectively); this clearly puts these planets out of the gap in the exoplanetary radii distribution and validates their super-Earth nature. Planet $b$ is more massive than planet $c$, but possibly less dense. We investigate whether this could be caused by partial melting of the mantle and find that tidal heating due to non-zero eccentricity of planet $b$ may be powerful enough. The system of HD219134 constitutes a very valuable benchmark for both stellar physics and exoplanetary science. The direct determination of the stellar density, radius and mass should be more extensively applied to provide accurate exoplanets properties and calibrate stellar models.
△ Less
Submitted 30 October, 2019; v1 submitted 22 September, 2019;
originally announced September 2019.
-
Constraints on HD113337 fundamental parameters and planetary system. Combining long-base visible interferometry, disk imaging and high-contrast imaging
Authors:
S. Borgniet,
K. Perraut,
K. Su,
M. Bonnefoy,
P. Delorme,
A. -M. Lagrange,
V. Bailey,
E. Buenzli,
D. Defrère,
T. Henning,
P. Hinz,
J. Leisenring,
N. Meunier,
D. Mourard,
N. Nardetto,
A. Skemer
Abstract:
HD113337 is a Main-Sequence F6V field star more massive than the Sun, hosting one (possibly two) radial velocity (RV) giant planet(s) and a cold debris disk (marked by an infrared excess). We used the VEGA interferometer on the CHARA array to measure HD113337 angular diameter, and derived its linear radius using the Gaia parallax. We computed the bolometric flux to derive its effective temperature…
▽ More
HD113337 is a Main-Sequence F6V field star more massive than the Sun, hosting one (possibly two) radial velocity (RV) giant planet(s) and a cold debris disk (marked by an infrared excess). We used the VEGA interferometer on the CHARA array to measure HD113337 angular diameter, and derived its linear radius using the Gaia parallax. We computed the bolometric flux to derive its effective temperature and luminosity, and we estimated its mass and age using evolutionary tracks. We used Herschel images to partially resolve the outer disk, and high-contrast images of HD113337 with the LBTI to probe the 10-80 au separation range. Finally, we combined the deduced contrast maps with previous RV of the star using the MESS2 software to bring upper mass limits on possible companions at all separations up to 80 au, taking advantage of the constraints on the age and inclination (brought by the fundamental parameter analysis and the disk imaging, respectively). We derive a limb-darkened angular diameter of 0.386 $\pm$ 0.009 mas that converts into a linear radius of 1.50 $\pm$ 0.04 solar radius. The fundamental parameter analysis leads to an effective temperature of 6774 $\pm$ 125 K, and to two possible age solutions: one young within 14-21 Myr and one old within 0.8-1.7 Gyr. We partially resolve the known outer debris disk and model its emission. Our best solution corresponds to a radius of 85 $\pm$ 20 au, an extension of 30 $\pm$ 20 au and an inclination within 10-30 degrees for the outer disk. The combination of imaging contrast limits, published RV, and our new age and inclination solutions leads to a first possible estimation of the true masses of the planetary companions: $\sim 7_{-2}^{+4}$ Jupiter masses for HD113337 b (confirmed companion), and $\sim 16_{-3}^{+10}$ Jupiter masses for HD113337 c (candidate). We also constrain possible additional companions at larger separations.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Perspectives of a visible instrument on the VLTI
Authors:
Florentin Millour,
Denis Mourard,
Julien Woillez,
Philippe Berio,
Andrea Chiavassa,
Orlagh Creevey,
Eric Lagadec,
Marc-Antoine Martinod,
Anthony Meilland,
Nicolas Nardetto,
Karine Perraut,
Philippe Stee
Abstract:
In this paper we present the most promising science cases for a new generation visible instrument on the VLTI and the conceptual idea for the instrumental configuration. We also present a statistical study of the potential targets that may be accessible for the different classes of objects and for the required spectral resolutions.
In this paper we present the most promising science cases for a new generation visible instrument on the VLTI and the conceptual idea for the instrumental configuration. We also present a statistical study of the potential targets that may be accessible for the different classes of objects and for the required spectral resolutions.
△ Less
Submitted 26 November, 2018; v1 submitted 17 October, 2018;
originally announced October 2018.
-
CRIRES high-resolution infrared spectroscopy of the long-period Cepheid l Car
Authors:
N. Nardetto,
E. Poretti,
A. Gallenne,
M. Rainer,
R. I. Anderson,
P. Fouque,
W. Gieren,
D. Graczyk,
P. Kervella,
P. Mathias,
A. Merand,
D. Mourard,
H. Neilson,
G. Pietrzynski,
B. Pilecki,
J. Storm,
S. Borgniet,
A. Chiavassa,
V. Hocdee,
B. Trahin
Abstract:
The dynamical structure of the atmosphere of Cepheids has been well studied in the optical. Several authors have found very interesting spectral features in the J band, but little data have been secured beyond 1.6 um. However, such observations can probe different radial velocities and line asymmetry regimes, and are able to provide crucial insights into stellar physics. Our goal was to investigat…
▽ More
The dynamical structure of the atmosphere of Cepheids has been well studied in the optical. Several authors have found very interesting spectral features in the J band, but little data have been secured beyond 1.6 um. However, such observations can probe different radial velocities and line asymmetry regimes, and are able to provide crucial insights into stellar physics. Our goal was to investigate the infrared line-forming region in the K-band domain, and its impact on the projection factor and the k-term of Cepheids. We secured CRIRES observations for the long-period Cepheid l Car, with a focus on the unblended spectral line NaI2208.969 nm. We measured the corresponding radial velocities (by using the first moment method) and the line asymmetries (by using the bi-Gaussian method). These quantities are compared to the HARPS visible spectra we previously obtained on l Car. The optical and infrared radial velocity curves show the same amplitude (only about 3% of difference), with a slight radial velocity shift of about 0.5 +/- 0.3 km s^-1 between the two curves. Around the minimum radius (phase ~ 0.9) the visible radial velocity curve is found in advance compared to the infrared one (phase lag), which is consistent with an infrared line forming higher in the atmosphere (compared to the visible line) and with a compression wave moving from the bottom to the top of the atmosphere during maximum outward velocity. The asymmetry of the K-band line is also found to be significantly different from that of the optical line.
△ Less
Submitted 24 August, 2018;
originally announced August 2018.
-
Physical properties of beta Lyr A and its opaque accretion disk
Authors:
D. Mourard,
M. Broz,
J. Nemravova,
P. Harmanec,
J. Budaj,
F. Baron,
J. Monnier,
G. Schaefer,
H. Schmitt,
I. Tallon-Bosc,
J. Armstrong,
E. Baines,
D. Bonneau,
H. Bozic,
J. M. Clausse,
C. Farrington,
D. Gies,
J. Jurysek,
D. Korcakova,
H. McAlister,
A. Meilland,
N. Nardetto,
P. Svoboad,
M. Slechta,
M. Wolf
, et al. (1 additional authors not shown)
Abstract:
Mass exchange and mass loss in close binaries can significantly affect their evolution, but a complete self-consistent theory of these processes is still to be developed. Processes such as radiative shielding due to a~hot-spot region, or a~hydrodynamical interaction of different parts of the gas stream have been studied previously. In order to test the respective predictions, it is necessary to ca…
▽ More
Mass exchange and mass loss in close binaries can significantly affect their evolution, but a complete self-consistent theory of these processes is still to be developed. Processes such as radiative shielding due to a~hot-spot region, or a~hydrodynamical interaction of different parts of the gas stream have been studied previously. In order to test the respective predictions, it is necessary to carry out detailed observations of binaries undergoing the largescale mass exchange, especially for those that are in the rapid transfer phase. \bla is an archetype of such a system, having a long and rich observational history. Our goal for this first study is to quantitatively estimate the geometry and physical properties of the optically thick components, namely the Roche-lobe filling mass-losing star, and the accretion disk surrounding the mass-gaining star of \blae. A series of continuum visible and NIR spectro-interferometric observations by the NPOI, CHARA/MIRC and VEGA instruments covering the whole orbit of \bla acquired during a~two-week campaign in 2013 were complemented with \ubvr\ photometric observations acquired during a three-year monitoring of the system. We included NUV and FUV observations from OAO~A-2, IUE, and Voyager satellites.
△ Less
Submitted 12 July, 2018;
originally announced July 2018.
-
The GJ 504 system revisited. Combining interferometric, radial velocity, and high contrast imaging data
Authors:
M. Bonnefoy,
K. Perraut,
A. -M. Lagrange,
P. Delorme,
A. Vigan,
M. Line,
L. Rodet,
C. Ginski,
D. Mourard,
G. -D. Marleau,
M. Samland,
P. Tremblin,
R. Ligi,
F. Cantalloube,
P. Mollière,
B. Charnay,
M. Kuzuhara,
M. Janson,
C. Morley,
D. D. Homeier,
V. D Orazi,
H. Klahr,
C. Mordasini,
B. Lavie,
J. -L. Baudino
, et al. (57 additional authors not shown)
Abstract:
The G-type star GJ504A is known to host a 3 to 35 MJup companion whose temperature, mass, and projected separation all contribute to make it a test case for the planet formation theories and for atmospheric models of giant planets and light brown dwarfs. We collected data from the CHARA interferometer, SOPHIE spectrograph, and VLT/SPHERE high contrast imager to revisit the properties of the system…
▽ More
The G-type star GJ504A is known to host a 3 to 35 MJup companion whose temperature, mass, and projected separation all contribute to make it a test case for the planet formation theories and for atmospheric models of giant planets and light brown dwarfs. We collected data from the CHARA interferometer, SOPHIE spectrograph, and VLT/SPHERE high contrast imager to revisit the properties of the system. We measure a radius of 1.35+/- 0.04Rsun for GJ504A which yields isochronal ages of 21+/-2Myr or 4.0+/-1.8Gyr for the system and line-of-sight stellar rotation axis inclination of $162.4_{-4.3}^{+3.8}$ degrees or $18.6_{-3.8}^{+4.3}$ degrees. We re-detect the companion in the Y2, Y3, J3, H2, and K1 dual band SPHERE images. The complete 1-4 $μ$m SED shape of GJ504b is best reproduced by T8-T9.5 objects with intermediate ages ($\leq1.5$Gyr), and/or unusual dusty atmospheres and/or super-solar metallicities. All six atmospheric models used yield $\mathrm{T_{eff}=550 \pm 50}$K for GJ504b and point toward a low surface gravity (3.5-4.0 dex). The accuracy on the metallicity value is limited by model-to-model systematics. It is not degenerate with the C/O ratio. We derive $\mathrm{log\:L/L_{\odot}=-6.15\pm0.15}$ dex for the companion compatible with masses of $\mathrm{M=1.3^{+0.6}_{-0.3}M_{Jup}}$ and $\mathrm{M=23^{+10}_{-9} M_{Jup}}$ for the young and old age ranges, respectively. The semi-major axis (sma) is above 27.8 au and the eccentricity lower than 0.55. The posterior on GJ~504b's orbital inclination suggests a misalignment with GJ~504A rotation axis. We combine the radial velocity and multi-epoch imaging data to exclude additional objects (90\% prob.) more massive than 2.5 and 30 $\mathrm{M_{Jup}}$ with sma in the range 0.01-80 au for the young and old system ages, respectively. The companion is in the envelope of the population of planets synthetized with our core-accretion model.
△ Less
Submitted 10 July, 2018; v1 submitted 2 July, 2018;
originally announced July 2018.
-
Accurate effective temperatures of the metal-poor benchmark stars HD 140283, HD 122563 and HD 103095 from CHARA interferometry
Authors:
I. Karovicova,
T. R. White,
T. Nordlander,
K. Lind,
L. Casagrande,
M. J. Ireland,
D. Huber,
O. Creevey,
D. Mourard,
G. H. Schaefer,
G. Gilmore,
A. Chiavassa,
M. Wittkowski,
P. Jofré,
U. Heiter,
F. Thévenin,
M. Asplund
Abstract:
Large stellar surveys of the Milky Way require validation with reference to a set of "benchmark" stars whose fundamental properties are well-determined. For metal-poor benchmark stars, disagreement between spectroscopic and interferometric effective temperatures has called the reliability of the temperature scale into question. We present new interferometric measurements of three metal-poor benchm…
▽ More
Large stellar surveys of the Milky Way require validation with reference to a set of "benchmark" stars whose fundamental properties are well-determined. For metal-poor benchmark stars, disagreement between spectroscopic and interferometric effective temperatures has called the reliability of the temperature scale into question. We present new interferometric measurements of three metal-poor benchmark stars, HD 140283, HD 122563, and HD 103095, from which we determine their effective temperatures. The angular sizes of all the stars were determined from observations with the PAVO beam combiner at visible wavelengths at the CHARA array, with additional observations of HD 103095 made with the VEGA instrument, also at the CHARA array. Together with photometrically derived bolometric fluxes, the angular diameters give a direct measurement of the effective temperature. For HD 140283 we find θ_LD = 0.324+/-0.005 mas, Teff = 5787+/-48 K; for HD 122563, θ_LD = 0.926+/-0.011 mas, Teff = 4636+/-37 K; and for HD 103095 θ_LD = 0.595+/-0.007 mas, Teff = 5140+/-49 K. Our temperatures for HD 140283 and HD 103095 are hotter than the previous interferometric measurements by 253 K and 322 K, respectively. We find good agreement between our temperatures and recent spectroscopic and photometric estimates. We conclude some previous interferometric measurements have been affected by systematic uncertainties larger than their quoted errors.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
French SKA White Book - The French Community towards the Square Kilometre Array
Authors:
F. Acero,
J. -T. Acquaviva,
R. Adam,
N. Aghanim,
M. Allen,
M. Alves,
R. Ammanouil,
R. Ansari,
A. Araudo,
E. Armengaud,
B. Ascaso,
E. Athanassoula,
D. Aubert,
S. Babak,
A. Bacmann,
A. Banday,
K. Barriere,
F. Bellossi,
J. -P. Bernard,
M. G. Bernardini,
M. Béthermin,
E. Blanc,
L. Blanchet,
J. Bobin,
S. Boissier
, et al. (153 additional authors not shown)
Abstract:
The "Square Kilometre Array" (SKA) is a large international radio telescope project characterised, as suggested by its name, by a total collecting area of approximately one square kilometre, and consisting of several interferometric arrays to observe at metric and centimetric wavelengths. The deployment of the SKA will take place in two sites, in South Africa and Australia, and in two successive p…
▽ More
The "Square Kilometre Array" (SKA) is a large international radio telescope project characterised, as suggested by its name, by a total collecting area of approximately one square kilometre, and consisting of several interferometric arrays to observe at metric and centimetric wavelengths. The deployment of the SKA will take place in two sites, in South Africa and Australia, and in two successive phases. From its Phase 1, the SKA will be one of the most formidable scientific machines ever deployed by mankind, and by far the most impressive in terms of data throughput and required computing power. With the participation of almost 200 authors from forty research institutes and six private companies, the publication of this French SKA white paper illustrates the strong involvement in the SKA project of the French astronomical community and of a rapidly growing number of major scientific and technological players in the fields of Big Data, high performance computing, energy production and storage, as well as system integration.
△ Less
Submitted 28 March, 2018; v1 submitted 19 December, 2017;
originally announced December 2017.
-
The peculiar fast-rotating star 51 Oph probed by VEGA/CHARA
Authors:
Narges Jamialahmadi,
Philippe Berio,
Anthony Meilland,
Karine Perraut,
Denis Mourard,
Bruno Lopez,
Philippe Stee,
Nicolas Nardetto,
B. Pichon,
J. M. Clausse,
A. Spang,
H. McAlister,
T. ten Brummelaar,
J. Sturmann,
N. Turner,
C. Farrington,
N. Vargas,
N. Scott
Abstract:
Stellar rotation is a key in our understanding of both mass-loss and evolution of intermediate and massive stars. It can lead to anisotropic mass-loss in the form of radiative wind or an excretion disk. We wished to spatially resolve the photosphere and gaseous environment of 51 Oph, a peculiar star with a very high vsin(i) of 267km s$^{-1}$ and an evolutionary status that remains unsettled. It ha…
▽ More
Stellar rotation is a key in our understanding of both mass-loss and evolution of intermediate and massive stars. It can lead to anisotropic mass-loss in the form of radiative wind or an excretion disk. We wished to spatially resolve the photosphere and gaseous environment of 51 Oph, a peculiar star with a very high vsin(i) of 267km s$^{-1}$ and an evolutionary status that remains unsettled. It has been classified by different authors as a Herbig, a $β$ Pic, or a classical Be star. We used the VEGA visible beam combiner installed on the CHARA array that reaches a submilliarcsecond resolution. Observation were centered on the H$α$ emission line. We derived, for the first time, the extension and flattening of 51 Oph photosphere. We found a major axis of $θ_{\mathrm{eq}}$=8.08$\pm$0.70$R_\odot$ and a minor axis of $θ_{\mathrm{pol}}$=5.66$\pm$0.23$R_\odot$ .
This high photosphere distortion shows that the star is rotating close to its critical velocity. Finally, using spectro-interferometric measurements in the H$ α$ line, we constrained the circumstellar environment geometry and kinematics and showed that the emission is produced in a 5.2$\pm$2R$_{*}$ disk in Keplerian rotation. From the visible point of view, 51 Oph presents all the features of a classical Be star: near critical-rotation and double-peaked H$α$ line in emission produced in a gaseous disk in Keplerian rotation. However, this does not explain the presence of dust as seen in the mid-infrared and millimeter spectra, and the evolutionary status of 51 Oph remains unsettled.
△ Less
Submitted 14 September, 2017;
originally announced September 2017.
-
Asymmetries on red giant branch surfaces from CHARA/MIRC optical interferometry
Authors:
A. Chiavassa,
R. Norris,
M. Montargès,
R. Ligi,
L. Fossati,
L. Bigot,
F. Baron,
P. Kervella,
J. D. Monnier,
D. Mourard,
N. Nardetto,
G. Perrin,
G. H. Schaefer,
T. A. ten Brummelaar,
Z. Magic,
R. Collet,
M. Asplund
Abstract:
Context. Red giant branch (RGB) stars are very bright objects in galaxies and are often used as standard candles. Interferometry is the ideal tool to characterize the dynamics and morphology of their atmospheres. Aims. We aim at precisely characterising the surface dynamics of a sample of RGB stars. Methods. We obtained interferometric observations for three RGB stars with the MIRC instrument moun…
▽ More
Context. Red giant branch (RGB) stars are very bright objects in galaxies and are often used as standard candles. Interferometry is the ideal tool to characterize the dynamics and morphology of their atmospheres. Aims. We aim at precisely characterising the surface dynamics of a sample of RGB stars. Methods. We obtained interferometric observations for three RGB stars with the MIRC instrument mounted at the CHARA interfer- ometer. We looked for asymmetries on the stellar surfaces using limb-darkening models. Results. We measured the apparent diameters of HD197989 (Epsilon Cyg) = 4.61+-0.02 mas, HD189276 (HR7633) = 2.95+-0.01 mas, and HD161096 (Beta Oph) = 4.43+-0.01 mas. We detected departures from the centrosymmetric case for all three stars with the tendency of a greater effect for lower logg of the sample. We explored the causes of this signal and conclude that a possible explanation to the interferometric signal is the convection-related and/or the magnetic-related surface activity. However, it is necessary to monitor these stars with new observations, possibly coupled with spectroscopy, in order to firmly establish the cause.
△ Less
Submitted 7 March, 2017;
originally announced March 2017.
-
Science cases for a visible interferometer
Authors:
Philippe Stee,
France Allard,
Myriam Benisty,
Lionel Bigot,
Nicolas Blind,
Henri Boffin,
Marcelo Borges Fernandes,
Alex Carciofi,
Andrea Chiavassa,
Orlagh Creevey,
Pierre Cruzalebes,
Willem-Jan de Wit,
Armando Domiciano de Souza,
Martin Elvis,
Nicolas Fabas,
Daniel Faes,
Alexandre Gallenne,
Carlos Guerrero Pena,
Michel Hillen,
Sebastian Hoenig,
Michael Ireland,
Pierre Kervella,
Makoto Kishimoto,
Nadia Kostogryz,
Stefan Kraus
, et al. (32 additional authors not shown)
Abstract:
High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome…
▽ More
High spatial resolution is the key for the understanding various astrophysical phenomena. But even with the future E-ELT, single dish instruments are limited to a spatial resolution of about 4 mas in the visible. For the closest objects within our Galaxy most of the stellar photosphere remains smaller than 1 mas. With the success of long baseline interferometry these limitations were soom overcome. Today low and high resolution interferometric instruments on the VLTI and CHARA offer an immense range of astrophysical studies. Combining more telescopes and moving to visible wavelengths broadens the science cases even more. With the idea of develo** strong science cases for a future visible interferometer, we organized a science group around the following topics: pre-main sequence and main sequence stars, fundamental parameters, asteroseismology and classical pulsating stars, evolved stars, massive stars, active galactic nuclei (AGNs) and imaging techniques. A meeting was organized on the 15th and 16th of January, 2015 in Nice with the support of the Action Specific in Haute Resolution Angulaire (ASHRA), the Programme National en Physique Stellaire (PNPS), the Lagrange Laboratory and the Observatoire de la Cote d'Azur, in order to present these cases and to discuss them further for future visible interferometers. This White Paper presents the outcome of the exchanges.
This book is dedicated to the memory of our colleague Olivier Chesneau who passed away at the age of 41.
△ Less
Submitted 21 March, 2017; v1 submitted 7 March, 2017;
originally announced March 2017.
-
HARPS-N high spectral resolution observations of Cepheids I. The Baade-Wesselink projection factor of δ Cep revisited
Authors:
N. Nardetto,
E. Poretti,
M. Rainer,
A. Fokin,
P. Mathias,
R. I. Anderson,
A. Gallenne,
W. Gieren,
D. Graczyk,
P. Kervella,
A. Mérand,
D. Mourard,
H. Neilson,
G. Pietrzynski,
B. Pilecki,
J. Storm
Abstract:
The projection factor p is the key quantity used in the Baade-Wesselink (BW) method for distance determination; it converts radial velocities into pulsation velocities. Several methods are used to determine p, such as geometrical and hydrodynamical models or the inverse BW approach when the distance is known. We analyze new HARPS-N spectra of delta Cep to measure its cycle-averaged atmospheric vel…
▽ More
The projection factor p is the key quantity used in the Baade-Wesselink (BW) method for distance determination; it converts radial velocities into pulsation velocities. Several methods are used to determine p, such as geometrical and hydrodynamical models or the inverse BW approach when the distance is known. We analyze new HARPS-N spectra of delta Cep to measure its cycle-averaged atmospheric velocity gradient in order to better constrain the projection factor. We first apply the inverse BW method to derive p directly from observations. The projection factor can be divided into three subconcepts: (1) a geometrical effect (p0); (2) the velocity gradient within the atmosphere (fgrad); and (3) the relative motion of the optical pulsating photosphere with respect to the corresponding mass elements (fo-g). We then measure the fgrad value of delta Cep for the first time. When the HARPS-N mean cross-correlated line-profiles are fitted with a Gaussian profile, the projection factor is pcc-g = 1.239 +/- 0.034(stat) +/- 0.023(syst). When we consider the different amplitudes of the radial velocity curves that are associated with 17 selected spectral lines, we measure projection factors ranging from 1.273 to 1.329. We find a relation between fgrad and the line depth measured when the Cepheid is at minimum radius. This relation is consistent with that obtained from our best hydrodynamical model of delta Cep and with our projection factor decomposition. Using the observational values of p and fgrad found for the 17 spectral lines, we derive a semi-theoretical value of fo-g. We alternatively obtain fo-g = 0.975+/-0.002 or 1.006+/-0.002 assuming models using radiative transfer in plane-parallel or spherically symmetric geometries, respectively. The new HARPS-N observations of delta Cep are consistent with our decomposition of the projection factor.
△ Less
Submitted 6 January, 2017;
originally announced January 2017.
-
The compact H$α$ emitting regions of the Herbig Ae/Be stars HD 179218 and HD 141569 from CHARA spectro-interferometry
Authors:
I. Mendigutía,
R. D. Oudmaijer,
D. Mourard,
J. Muzerolle
Abstract:
This work presents CHARA/VEGA H$α$ spectro-interferometry (R ~ 6000, and $λ$/2B ~ 1 mas) of HD 179218 and HD 141569, doubling the sample of Herbig Ae/Be (HAeBe) stars for which this type of observations is available so far. The observed H$α$ emission is spatially unresolved, indicating that the size of the H$α$ emitting region is smaller than ~ 0.21 and 0.12 au for HD 179218 and HD 141529 (~ 15 an…
▽ More
This work presents CHARA/VEGA H$α$ spectro-interferometry (R ~ 6000, and $λ$/2B ~ 1 mas) of HD 179218 and HD 141569, doubling the sample of Herbig Ae/Be (HAeBe) stars for which this type of observations is available so far. The observed H$α$ emission is spatially unresolved, indicating that the size of the H$α$ emitting region is smaller than ~ 0.21 and 0.12 au for HD 179218 and HD 141529 (~ 15 and 16 R*, respectively). This is smaller than for the two other HAeBes previously observed with the same instrumentation. Two different scenarios have been explored in order to explain the compact line emitting regions. A hot, several thousand K, blackbody disc is consistent with the observations of HD 179218 and HD 141569. Magnetospheric accretion (MA) is able to reproduce the bulk of the H$α$ emission shown by HD 179218, confirming previous estimates from MA shock modelling with a mass accretion rate of 10^-8 Msun/yr, and an inclination to the line of sight between 30 and 50 degr. The H$α$ profile of HD 141569 cannot be fitted from MA due to the high rotational velocity of this object. Putting the CHARA sample together, a variety of scenarios is required to explain the H$α$ emission in HAeBe stars -compact or extended, discs, accretion, and winds-, in agreement with previous Br$γ$ spectro-interferometric observations.
△ Less
Submitted 30 September, 2016;
originally announced October 2016.
-
VEGA/CHARA interferometric observations of Cepheids. I. A resolved structure around the prototype classical Cepheid delta Cep in the visible spectral range
Authors:
N. Nardetto,
A. Mérand,
D. Mourard,
J. Storm,
W. Gieren,
P. Fouqué,
A. Gallenne,
D. Graczyk,
P. Kervella,
H. Neilson,
G. Pietrzynski,
B. Pilecki,
J. Breitfelder,
P. Berio,
M. Challouf,
J. -M. Clausse,
R. Ligi,
P. Mathias,
A. Meilland,
K. Perraut,
E. Poretti,
M. Rainer,
A. Spang,
P. Stee,
I. Tallon-Bosc
, et al. (1 additional authors not shown)
Abstract:
The B-W method is used to determine the distance of Cepheids and consists in combining the angular size variations of the star, as derived from infrared surface-brightness relations or interferometry, with its linear size variation, as deduced from visible spectroscopy using the projection factor. While many Cepheids have been intensively observed by infrared beam combiners, only a few have been o…
▽ More
The B-W method is used to determine the distance of Cepheids and consists in combining the angular size variations of the star, as derived from infrared surface-brightness relations or interferometry, with its linear size variation, as deduced from visible spectroscopy using the projection factor. While many Cepheids have been intensively observed by infrared beam combiners, only a few have been observed in the visible. This paper is part of a project to observe Cepheids in the visible with interferometry as a counterpart to infrared observations already in hand. Observations of delta Cep itself were secured with the VEGA/CHARA instrument over the full pulsation cycle of the star. These visible interferometric data are consistent in first approximation with a quasi-hydrostatic model of pulsation surrounded by a static circumstellar environment (CSE) with a size of theta_cse=8.9 +/- 3.0 mas and a relative flux contribution of f_cse=0.07+/-0.01. A model of visible nebula (a background source filling the field of view of the interferometer) with the same relative flux contribution is also consistent with our data at small spatial frequencies. However, in both cases, we find discrepancies in the squared visibilities at high spatial frequencies (maximum 2sigma) with two different regimes over the pulsation cycle of the star, phi=0.0-0.8 and phi=0.8-1.0. We provide several hypotheses to explain these discrepancies, but more observations and theoretical investigations are necessary before a firm conclusion can be drawn. For the first time we have been able to detect in the visible domain a resolved structure around delta~Cep. We have also shown that a simple model cannot explain the observations, and more work will be necessary in the future, both on observations and modelling.
△ Less
Submitted 23 September, 2016;
originally announced September 2016.
-
Radii, masses, and ages of 18 bright stars using interferometry and new estimations of exoplanetary parameters
Authors:
Roxanne Ligi,
Orlagh Creevey,
Denis Mourard,
Aurélien Crida,
Anne-Marie Lagrange,
Nicolas Nardetto,
Karine Perraut,
Mathias Schultheis,
Isabelle Tallon-Bosc,
Theo ten Brummelaar
Abstract:
Accurate stellar parameters are needed in numerous domains of astrophysics. The position of stars on the H-R diagram is an important indication of their structure and evolution, and it helps improve stellar models. Furthermore, the age and mass of stars hosting planets are required elements for studying exoplanetary systems. We aim at determining accurate parameters of a set of 18 bright exoplanet…
▽ More
Accurate stellar parameters are needed in numerous domains of astrophysics. The position of stars on the H-R diagram is an important indication of their structure and evolution, and it helps improve stellar models. Furthermore, the age and mass of stars hosting planets are required elements for studying exoplanetary systems. We aim at determining accurate parameters of a set of 18 bright exoplanet host and potential host stars from interferometric measurements, photometry, and stellar models. Using the VEGA/CHARA interferometer, we measured the angular diameters of 18 stars, ten of which host exoplanets. We combined them with their distances to estimate their radii. We used photometry to derive their bolometric flux and, then, their effective temperature and luminosity to place them on the H-R diagram. We then used the PARSEC models to derive their best fit ages and masses, with error bars derived from MC calculations. Our interferometric measurements lead to an average of 1.9% uncertainty on angular diameters and 3% on stellar radii. There is good agreement between measured and indirect estimations of angular diameters (from SED fitting or SB relations) for MS stars, but not as good for more evolved stars. For each star, we provide a likelihood map in the mass-age plane; typically, two distinct sets of solutions appear (an old and a young age). The errors on the ages and masses that we provide account for the metallicity uncertainties, which are often neglected by other works. From measurements of its radius and density, we also provide the mass of 55 Cnc independently of models. From the stellar masses, we provide new estimates of semi-major axes and minimum masses of exoplanets with reliable uncertainties. We also derive the radius, density, and mass of 55 Cnc e, a super-Earth that transits its stellar host. Our exoplanetary parameters reflect the known population of exoplanets.
△ Less
Submitted 14 February, 2016; v1 submitted 10 November, 2015;
originally announced November 2015.
-
The Expanding Fireball of Nova Delphini 2013
Authors:
G. H. Schaefer,
T. ten Brummelaar,
D. R. Gies,
C. D. Farrington,
B. Kloppenborg,
O. Chesneau,
J. D. Monnier,
S. T. Ridgway,
N. Scott,
I. Tallon-Bosc,
H. A. McAlister,
T. Boyajian,
V. Maestro,
D. Mourard,
A. Meilland,
N. Nardetto,
P. Stee,
J. Sturmann,
N. Vargas,
F. Baron,
M. Ireland,
E. K. Baines,
X. Che,
J. Jones,
N. D. Richardson
, et al. (12 additional authors not shown)
Abstract:
A classical nova occurs when material accreting onto the surface of a white dwarf in a close binary system ignites in a thermonuclear runaway. Complex structures observed in the ejecta at late stages could result from interactions with the companion during the common envelope phase. Alternatively, the explosion could be intrinsically bipolar, resulting from a localized ignition on the surface of t…
▽ More
A classical nova occurs when material accreting onto the surface of a white dwarf in a close binary system ignites in a thermonuclear runaway. Complex structures observed in the ejecta at late stages could result from interactions with the companion during the common envelope phase. Alternatively, the explosion could be intrinsically bipolar, resulting from a localized ignition on the surface of the white dwarf or as a consequence of rotational distortion. Studying the structure of novae during the earliest phases is challenging because of the high spatial resolution needed to measure their small sizes. Here we report near-infrared interferometric measurements of the angular size of Nova Delphini 2013, starting from one day after the explosion and continuing with extensive time coverage during the first 43 days. Changes in the apparent expansion rate can be explained by an explosion model consisting of an optically thick core surrounded by a diffuse envelope. The optical depth of the ejected material changes as it expands. We detect an ellipticity in the light distribution, suggesting a prolate or bipolar structure that develops as early as the second day. Combining the angular expansion rate with radial velocity measurements, we derive a geometric distance to the nova of 4.54 +/- 0.59 kpc from the Sun.
△ Less
Submitted 18 May, 2015;
originally announced May 2015.
-
Spectral and spatial imaging of the Be+sdO binary phi Persei
Authors:
D. Mourard,
J. D. Monnier,
A. Meilland,
D. Gies,
F. Millour,
M. Benisty,
X. Che,
E. D. Grundstrom,
R. Ligi,
G. Schaefer,
F. Baron,
S. Kraus,
M. Zhao,
E. Pedretti,
P. Berio,
J. M. Clausse,
N. Nardetto,
K. Perraut,
A. Spang,
P. Stee,
I. Tallon-Bosc,
H. McAlister,
T. ten Brummelaar,
S. T. Ridgway,
J. Sturmann
, et al. (3 additional authors not shown)
Abstract:
The rapidly rotating Be star phi Persei was spun up by mass and angular momentum transfer from a now stripped-down, hot subdwarf companion. Here we present the first high angular resolution images of phi Persei made possible by new capabilities in longbaseline interferometry at near-IR and visible wavelengths. We observed phi Persei with the MIRC and VEGA instruments of the CHARA Array. Additional…
▽ More
The rapidly rotating Be star phi Persei was spun up by mass and angular momentum transfer from a now stripped-down, hot subdwarf companion. Here we present the first high angular resolution images of phi Persei made possible by new capabilities in longbaseline interferometry at near-IR and visible wavelengths. We observed phi Persei with the MIRC and VEGA instruments of the CHARA Array. Additional MIRC-only observations were performed to track the orbital motion of the companion, and these were fit together with new and existing radial velocity measurements of both stars to derive the complete orbital elements and distance. The hot subdwarf companion is clearly detected in the near-IR data at each epoch of observation with a flux contribution of 1.5% in the H band, and restricted fits indicate that its flux contribution rises to 3.3% in the visible. A new binary orbital solution is determined by combining the astrometric and radial velocity measurements. The derived stellar masses are 9.6+-0.3Msol and 1.2+-0.2Msol for the Be primary and subdwarf secondary, respectively. The inferred distance (186 +- 3 pc), kinematical properties, and evolutionary state are consistent with membership of phi Persei in the alpha Per cluster. From the cluster age we deduce significant constraints on the initial masses and evolutionary mass transfer processes that transformed the phi Persei binary system. The interferometric data place strong constraints on the Be disk elongation, orientation, and kinematics, and the disk angular momentum vector is coaligned with and has the same sense of rotation as the orbital angular momentum vector. The VEGA visible continuum data indicate an elongated shape for the Be star itself, due to the combined effects of rapid rotation, partial obscuration of the photosphere by the circumstellar disk, and flux from the bright inner disk.
△ Less
Submitted 11 March, 2015;
originally announced March 2015.
-
Transiting exoplanets and magnetic spots characterized with optical interferometry
Authors:
R. Ligi,
D. Mourard,
A. -M. Lagrange,
K. Perraut,
A. Chiavassa
Abstract:
Stellar activity causes difficulties in the characterization of transiting exoplanets. Studies have been performed to quantify its impact on infrared interferometry, but not in the visible domain, which however allows reaching better angular resolution and is also the one mostly used for spectroscopic and photometric measurements.
We use a standard case to completely analyse the impact of an exo…
▽ More
Stellar activity causes difficulties in the characterization of transiting exoplanets. Studies have been performed to quantify its impact on infrared interferometry, but not in the visible domain, which however allows reaching better angular resolution and is also the one mostly used for spectroscopic and photometric measurements.
We use a standard case to completely analyse the impact of an exoplanet and a spot on interferometric observables and relate it to current instrument capabilities, taking into account realistic achievable precisions.
We built a numerical code called COMETS using analytical formulae to perform a simple comparison of exoplanet and spot signals. We explore instrumental specificities needed to detect them, like the baseline length required, the accuracy and S/N. We also discuss the impact of exoplanet and spot parameters on squared visibility and phase.
We find that the main improvement to bring is the sensitivity of instruments. The accuracy on squared visibilities has to be improved by a factor 10 to detect an exoplanet of 0.1 mas, leading to $<0.5%$ precision, along with phase measurements of ~$5^°$ accuracy beyond the first null of visibility. For a 0.05 mas exoplanet, accuracies of ~$0.1%$ and ~$1^°$ from the first null are required on squared visibilities and phases, respectively. Magnetic spots can mimic these signals, leading to false exoplanet characterization. Phases measurements from the 3rd lobe is needed to distinguish between a spot and an exoplanet if they have the same radius.
Increasing interferometer sensitivity, more objects will become common between interferometric targets and photometric ones. Furthermore, new missions like PLATO, CHEOPS or TESS will provide bright exoplanet host stars. Measurements will thus overlap and provide a better characterization of stellar activity and exoplanet.
△ Less
Submitted 24 November, 2014; v1 submitted 20 October, 2014;
originally announced October 2014.
-
Benchmark stars for Gaia: fundamental properties of the Population II star HD140283 from interferometric, spectroscopic and photometric data
Authors:
O. Creevey,
F. Thévenin,
P. Berio,
U. Heiter,
K. von Braun,
D. Mourard,
L. Bigot,
T. S. Boyajian,
P. Kervella,
P. Morel,
B. Pichon,
A. Chiavassa,
N. Nardetto,
K. Perraut,
A. Meilland,
H. A. Mc Alister,
T. A. ten Brummelaar,
C. Farrington. J. Sturmann,
L. Sturmann,
N. Turner
Abstract:
We determined the fundamental properties of HD 140283 by obtaining new interferometric and spectroscopic measurements and combining them with photometry from the literature. The interferometric measurements were obtained using the visible interferometer VEGA on the CHARA array and we determined a 1D limb-darkened angular diameter of 0.353 +/- 0.013 milliarcseconds. Using photometry from the litera…
▽ More
We determined the fundamental properties of HD 140283 by obtaining new interferometric and spectroscopic measurements and combining them with photometry from the literature. The interferometric measurements were obtained using the visible interferometer VEGA on the CHARA array and we determined a 1D limb-darkened angular diameter of 0.353 +/- 0.013 milliarcseconds. Using photometry from the literature we derived the bolometric flux with two solutions: a zero-reddening one of Fbol = 3.890 +/- 0.066 1E-8 erg/s/cm2 and a solution with a maximum of Av = 0.1 mag, Fbol= 4.220 +/- 0.067 1E-8 erg/s/cm2. The interferometric Teff is thus 5534 +/- 103 K or 5647 +/- 105 K and its radius is R = 2.21 +/- 0.08 Rsol. Spectroscopic measurements of HD140283 were obtained using HARPS, NARVAL, and UVES and a 1D LTE analysis of H-alpha line wings yields Teff(Halpha) = 5626 +/- 75 K. Using fine-tuned stellar models including diffusion of elements we then determined the mass M and age t of HD140283. Once the metallicity has been fixed, the age of the star depends on M, initial helium abundance Yi and mixing-length parameter alpha, only two of which are independent. We need to adjust alpha to much lower values than the solar one (~2) in order to fit the observations, and if Av = 0.0 mag then 0.5 < alpha < 1. We give an equation to estimate t from M, Yi (alpha) and Av. Establishing a reference alpha = 1.00 and adopting Yi = 0.245 we derive a mass and age of HD140283: M = 0.780 +/- 0.010 Msol and t = 13.7 +/- 0.7 Gyr (Av = 0.0) or M = 0.805 +/- 0.010 Msol and t = 12.2 +/- 0.6 Gyr (Av=0.1 mag). Our stellar models yield an initial metallicity of [Z/X]i = -1.70 and logg = 3.65 +/- 0.03. Asteroseismic observations are critical for overcoming limitations in our results.
△ Less
Submitted 15 December, 2014; v1 submitted 17 October, 2014;
originally announced October 2014.
-
A resolved, au-scale gas disk around the B[e] star HD 50138
Authors:
L. E. Ellerbroek,
M. Benisty,
S. Kraus,
K. Perraut,
J. Kluska,
J. B. le Bouquin,
M. Borges Fernandes,
A. Domiciano de Souza,
K. M. Maaskant,
L. Kaper,
F. Tramper,
D. Mourard,
I. Tallon-Bosc,
T. ten Brummelaar,
M. L. Sitko,
D. K. Lynch,
R. W. Russell
Abstract:
HD 50138 is a B[e] star surrounded by a large amount of circumstellar gas and dust. Its spectrum shows characteristics which may indicate either a pre- or a post-main-sequence system. Map** the kinematics of the gas in the inner few au of the system contributes to a better understanding of its physical nature. We present the first high spatial and spectral resolution interferometric observations…
▽ More
HD 50138 is a B[e] star surrounded by a large amount of circumstellar gas and dust. Its spectrum shows characteristics which may indicate either a pre- or a post-main-sequence system. Map** the kinematics of the gas in the inner few au of the system contributes to a better understanding of its physical nature. We present the first high spatial and spectral resolution interferometric observations of the Br-gamma line of HD~50138, obtained with VLTI/AMBER. The line emission originates from a region more compact (up to 3 au) than the continuum-emitting region. Blue- and red-shifted emission originates from the two different hemispheres of an elongated structure perpendicular to the polarization angle. The velocity of the emitting medium decreases radially. An overall offset along the NW direction between the line- and continuum-emitting regions is observed. We compare the data with a geometric model of a thin Keplerian disk and a spherical halo on top of a Gaussian continuum. Most of the data are well reproduced by this model, except for the variability, the global offset and the visibility at the systemic velocity. The evolutionary state of the system is discussed; most diagnostics are ambiguous and may point either to a post-main-sequence or a pre-main-sequence nature.
△ Less
Submitted 25 September, 2014;
originally announced September 2014.
-
Improving the surface brightness-color relation for early-type stars using optical interferometry
Authors:
M. Challouf,
N. Nardetto,
D. Mourard,
D. Graczyk,
H. Aroui,
O. Chesneau,
O. Delaa,
G. Pietrzyński,
W. Gieren,
R. Ligi,
A. Meilland,
K. Perraut,
I. Tallon-Bosc,
H. McAlister,
T. ten Brummelaar,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
N. Vargas,
N. Scott
Abstract:
The aim of this work is to improve the SBC relation for early-type stars in the $-1 \leq V-K \leq 0$ color domain, using optical interferometry. Observations of eight B- and A-type stars were secured with the VEGA/CHARA instrument in the visible. The derived uniform disk angular diameters were converted into limb darkened angular diameters and included in a larger sample of 24 stars, already obser…
▽ More
The aim of this work is to improve the SBC relation for early-type stars in the $-1 \leq V-K \leq 0$ color domain, using optical interferometry. Observations of eight B- and A-type stars were secured with the VEGA/CHARA instrument in the visible. The derived uniform disk angular diameters were converted into limb darkened angular diameters and included in a larger sample of 24 stars, already observed by interferometry, in order to derive a revised empirical relation for O, B, A spectral type stars with a V-K color index ranging from -1 to 0. We also took the opportunity to check the consistency of the SBC relation up to $V-K \simeq 4$ using 100 additional measurements. We determined the uniform disk angular diameter for the eight following stars: $γ$ Ori, $ζ$ Per, $8$ Cyg, $ι$ Her, $λ$ Aql, $ζ$ Peg, $γ$ Lyr, and $δ$ Cyg with V-K color ranging from -0.70 to 0.02 and typical precision of about $1.5\%$. Using our total sample of 132 stars with $V-K$ colors index ranging from about $-1$ to $4$, we provide a revised SBC relation. For late-type stars ($0 \leq V-K \leq 4$), the results are consistent with previous studies. For early-type stars ($-1 \leq V-K \leq 0$), our new VEGA/CHARA measurements combined with a careful selection of the stars (rejecting stars with environment or stars with a strong variability), allows us to reach an unprecedented precision of about 0.16 magnitude or $\simeq 7\%$ in terms of angular diameter.
△ Less
Submitted 10 September, 2014; v1 submitted 4 September, 2014;
originally announced September 2014.
-
Separated Fringe Packet Observations with the CHARA Array II: $ω$ Andromeda, HD 178911, and ξ Cephei
Authors:
Christopher D. Farrington,
Theo A. ten Brummelaar,
Brian D. Mason,
William I. Hartkopf,
Denis Mourard,
Ehsan Moravveji,
Harold A. McAlister,
Nils H. Turner,
Laszlo Sturmann,
Judit Sturmann
Abstract:
When observed with optical long-baseline interferometers (OLBI), components of a binary star which are sufficiently separated produce their own interferometric fringe packets; these are referred to as Separated Fringe Packet (SFP) binaries. These SFP binaries can overlap in angular separation with the regime of systems resolvable by speckle interferometry at single, large-aperture telescopes and c…
▽ More
When observed with optical long-baseline interferometers (OLBI), components of a binary star which are sufficiently separated produce their own interferometric fringe packets; these are referred to as Separated Fringe Packet (SFP) binaries. These SFP binaries can overlap in angular separation with the regime of systems resolvable by speckle interferometry at single, large-aperture telescopes and can provide additional measurements for preliminary orbits lacking good phase coverage, help constrain elements of already established orbits, and locate new binaries in the undersampled regime between the bounds of spectroscopic surveys and speckle interferometry. In this process, a visibility calibration star is not needed, and the separated fringe packets can provide an accurate vector separation. In this paper, we apply the SFP approach to ω Andromeda, HD 178911, and ξ Cephei with the CLIMB three-beam combiner at the CHARA Array. For these systems we determine component masses and parallax of 0.963${\pm}$0.049 $M_{\odot}$ and 0.860${\pm}$0.051 $M_{\odot}$ and 39.54${\pm}$1.85 milliarcseconds (mas) for ω Andromeda, for HD 178911 of 0.802${\pm}$0.055 $M_{\odot}$ and 0.622${\pm}$0.053 $M_{\odot}$ with 28.26${\pm}$1.70 mas, and masses of 1.045${\pm}$0.031 $M_{\odot}$ and 0.408${\pm}$0.066 $M_{\odot}$ and 38.10${\pm}$2.81 mas for ξ Cephei.
△ Less
Submitted 2 July, 2014;
originally announced July 2014.
-
Planet transit and stellar granulation detection with interferometry
Authors:
Andrea Chiavassa,
Roxanne Ligi,
Zazralt Magic,
Remo Collet,
Martin Asplund,
Denis Mourard
Abstract:
Aims. We used realistic three-dimensional (3D) radiative hydrodynamical (RHD) simulations from the Stagger-grid and synthetic images computed with the radiative transfer code Optim3D to provide interferometric observables to extract the signature of stellar granulation and transiting planets. Methods. We computed intensity maps from RHD simulations for twelve interferometric instruments covering w…
▽ More
Aims. We used realistic three-dimensional (3D) radiative hydrodynamical (RHD) simulations from the Stagger-grid and synthetic images computed with the radiative transfer code Optim3D to provide interferometric observables to extract the signature of stellar granulation and transiting planets. Methods. We computed intensity maps from RHD simulations for twelve interferometric instruments covering wavelengths ranging from optical to infrared. The stellar surface asymmetries in the brightness distribution mostly affect closure phases. We compared the closure phases of the system star with a transiting planet and the star alone and considered the impact of magnetic spots constructing a hypothetical starspots image. Results. All the simulations show departure from the axisymmetric case at all wavelengths. We presented two possible targets (Beta Com and Procyon) and found that departures up to 16 deg can be detected on the 3rd lobe and higher. In particular, MIRC is the most appropriate instrument because it combines good UV coverage and long baselines. Moreover, we explored the impact of convection on interferometric planet signature for three prototypes of planets. It is possible to disentangle the signature of the planet at particular wavelengths (either in the infrared or in the optical) by comparing the closure phases of the star at difference phases of the planetary transit. Conclusions. The detection and characterisation of planets must be based on a comprehensive knowledge of the host star; this includes the detailed study of the stellar surface convection with interferometric techniques. In this context, RHD simulations are crucial to reach this aim. We emphasize that interferometric observations should be pushed at high spatial frequencies by accumulating observations on closure phases at short and long baselines.
△ Less
Submitted 28 April, 2014;
originally announced April 2014.
-
The operation of VEGA/CHARA : from the scientific idea to the final products
Authors:
Roxanne Ligi,
Denis Mourard,
Nicolas Nardetto,
Jean-Michel Clausse
Abstract:
We describe the data flow in the operation of the VEGA/CHARA instrument. After a brief summary of the main characteristics and scientific objectives of the VEGA instrument, we explain the standard procedure from the scientific idea up to the execution of the observation. Then, we describe the different steps done after the observation, from the raw data to the archives and the final products. Many…
▽ More
We describe the data flow in the operation of the VEGA/CHARA instrument. After a brief summary of the main characteristics and scientific objectives of the VEGA instrument, we explain the standard procedure from the scientific idea up to the execution of the observation. Then, we describe the different steps done after the observation, from the raw data to the archives and the final products. Many tools are used and we show how the Virtual Observatory principles have been implemented for the interoperability of these software and databases.
△ Less
Submitted 23 February, 2014;
originally announced February 2014.
-
The fundamental parameters of the roAp star 10 Aql
Authors:
K. Perraut,
S. Borgniet,
M. Cunha,
L. Bigot,
I. Brandão,
D. Mourard,
N. Nardetto,
O. Chesneau,
H. McAlister,
T. A. ten Brummelaar,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
P. J. Goldfinger
Abstract:
Due to the strong magnetic field and related abnormal surface layers existing in rapidly oscillating Ap stars, systematic errors are likely to be present when determining their effective temperatures, which potentially compromises asteroseismic studies of these pulsators. Using long-baseline interferometry, our goal is to determine accurate angular diameters of a number of roAp targets to provide…
▽ More
Due to the strong magnetic field and related abnormal surface layers existing in rapidly oscillating Ap stars, systematic errors are likely to be present when determining their effective temperatures, which potentially compromises asteroseismic studies of these pulsators. Using long-baseline interferometry, our goal is to determine accurate angular diameters of a number of roAp targets to provide a temperature calibration for these stars. We obtained interferometric observations of 10 Aql with the visible spectrograph VEGA at the CHARA array. We determined a limb-darkened angular diameter of 0.275+/-0.009 mas and deduced a linear radius of 2.32+/-0.09 R_sun. We estimated the star's bolometric flux and used it, in combination with its parallax and angular diameter, to determine the star's luminosity and effective temperature. For two data sets of bolometric flux we derived an effective temperature of 7800+/-170 K and a luminosity of 18+/-1 L_sun or of 8000+/-210 K and 19+/-2 L_sun. We used these fundamental parameters together with the large frequency separation to constrain the mass and the age of 10 Aql, using the CESAM stellar evolution code. Assuming a solar chemical composition and ignoring all kinds of diffusion and settling of elements, we obtained a mass of 1.92 M_sun and an age of 780 Gy or a mass of 1.95 M_sun and an age of 740 Gy, depending on the considered bolometric flux. For the first time, we managed to determine an accurate angular diameter for a star smaller than 0.3 mas and to derive its fundamental parameters. In particular, by only combining our interferometric data and the bolometric flux, we derived an effective temperature that can be compared to those derived from atmosphere models. Such fundamental parameters can help for testing the mechanism responsible for the excitation of the oscillations observed in the magnetic pulsating stars.
△ Less
Submitted 17 September, 2013;
originally announced September 2013.
-
An interferometric study of the post-AGB binary 89 Herculis I Spatially resolving the continuum circumstellar environment at optical and near-IR wavelengths with the VLTI, NPOI, IOTA, PTI, and the CHARA Array
Authors:
M. Hillen,
T. Verhoelst,
H. Van Winckel,
O. Chesneau,
C. A. Hummel,
J. D. Monnier,
C. Farrington,
C. Tycner,
D. Mourard,
T. ten Brummelaar,
D. P. K. Banerjee,
R. T. Zavala
Abstract:
Binary post-AGB stars are interesting laboratories to study both the evolution of binaries as well as the structure of circumstellar disks. A multiwavelength high angular resolution study of the prototypical object 89 Herculis is performed with the aim of identifying and locating the different emission components seen in the SED. A large interferometric data set, collected over the past decade and…
▽ More
Binary post-AGB stars are interesting laboratories to study both the evolution of binaries as well as the structure of circumstellar disks. A multiwavelength high angular resolution study of the prototypical object 89 Herculis is performed with the aim of identifying and locating the different emission components seen in the SED. A large interferometric data set, collected over the past decade and covering optical and near-IR wavelengths, is analyzed with simple geometric models. Combining the interferometric constraints with the photometry and the optical spectra, we reassess the energy budget of the post-AGB star and its circumstellar environment. We report the first (direct) detection of a large (35-40%) optical circumstellar flux contribution and spatially resolve its emission region. Given this large amount of reprocessed and/or redistributed optical light, the fitted size of the emission region is rather compact and fits with(in) the inner rim of the circumbinary dust disk. This rim dominates our K band data through thermal emission and is rather compact, emitting significantly already at a radius of twice the orbital separation. We interpret the circumstellar optical flux as due to a scattering process, with the scatterers located in the extremely puffed-up inner rim of the disk and possibly also in a bipolar outflow seen pole-on. A non-LTE gaseous origin in an inner disk cannot be excluded but is considered highly unlikely. This direct detection of a significant amount of circumbinary light at optical wavelengths poses several significant questions regarding our understanding of both post-AGB binaries and the physics in their circumbinary disks. Although the identification of the source of emission/scattering remains inconclusive without further study on this and similar objects, the implications are manifold.
△ Less
Submitted 30 August, 2013;
originally announced August 2013.
-
Enhanced Halpha activity at periastron in the young and massive spectroscopic binary HD200775
Authors:
M. Benisty,
K. Perraut,
D. Mourard,
P. Stee,
G. H. R. A. Lima,
J. B. Le Bouquin,
M. Borges Fernandes,
O. Chesneau,
N. Nardetto,
I. Tallon-Bosc,
H. McAlister,
T. Ten Brummelaar,
S. Ridgway,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
P. J Goldfinger
Abstract:
Young close binaries clear central cavities in their surrounding circumbinary disk from which the stars can still accrete material. This process takes place within the very first astronomical units, and is still not well constrained as the observational evidence has been gathered, until now, only by means of spectroscopy. The young object HD200775 (MWC361) is a massive spectroscopic binary (separa…
▽ More
Young close binaries clear central cavities in their surrounding circumbinary disk from which the stars can still accrete material. This process takes place within the very first astronomical units, and is still not well constrained as the observational evidence has been gathered, until now, only by means of spectroscopy. The young object HD200775 (MWC361) is a massive spectroscopic binary (separation of ~15.9mas, ~5.0~AU), with uncertain classification (early/late Be), that shows a strong and variable Halpha emission. We aim to study the mechanisms that produce the Halpha line at the AU-scale. Combining the radial velocity measurements and astrometric data available in the literature, we determined new orbital parameters. With the VEGA instrument on the CHARA array, we spatially and spectrally resolved the Halpha emission of HD200775, at low and medium spectral resolutions (R~1600 and 5000) over a full orbital period (~3.6 years). We observe that the Halpha equivalent width varies with the orbital phase, and increases close to periastron, as expected from theoretical models that predict an increase of the mass transfer from the circumbinary disk to the primary disk. In addition, using spectral visibilities and differential phases, we find marginal variations of the typical extent of the Halpha emission (at 1 to 2-sigma level) and location (at 1 to 5-sigma level). The spatial extent of the Halpha emission, as probed by a Gaussian FWHM, is minimum at the ascending node (0.67+/-0.20 mas, i.e., 0.22+/-0.06 AU), and more than doubles at periastron. In addition, the Gaussian photocenter is slightly displaced in the direction opposite to the secondary, ruling out the scenario in which all or most of the Halpha emission is due to accretion onto the secondary. These findings, together with the wide Halpha line profile, may be due to a non-spherical wind enhanced at periastron.
△ Less
Submitted 3 June, 2013;
originally announced June 2013.
-
Understanding the dynamical structure of pulsating stars: The center-of-mass velocity and the Baade-Wesselink projection factor of the beta-Cephei star alpha-Lupi
Authors:
N. Nardetto,
P. Mathias,
A. Fokin,
E. Chapellier,
G. Pietrzynski,
W. Gieren,
D. Graczyk,
D. Mourard
Abstract:
High-resolution spectroscopy of pulsating stars is a powerful tool to study the dynamical structure of their atmosphere. Lines asymmetry is used to derive the center-of-mass velocity of the star, while a direct measurement of the atmospheric velocity gradient helps determine the projection factor used in the Baade-Wesselink method of distance determination. We aim at deriving the center-of-mass ve…
▽ More
High-resolution spectroscopy of pulsating stars is a powerful tool to study the dynamical structure of their atmosphere. Lines asymmetry is used to derive the center-of-mass velocity of the star, while a direct measurement of the atmospheric velocity gradient helps determine the projection factor used in the Baade-Wesselink method of distance determination. We aim at deriving the center-of-mass velocity and the projection factor of the beta-Cephei star alpha-Lup. We present HARPS high spectral resolution observations of alpha-Lup. We calculate the first-moment radial velocities and fit the spectral line profiles by a bi-Gaussian to derive line asymmetries. Correlations between the gamma-velocity and the gamma-asymmetry (defined as the average values of the radial velocity and line asymmetry curves respectively) are used to derive the center-of-mass velocity of the star. By combining our spectroscopic determination of the atmospheric velocity gradient with a hydrodynamical modelof the photosphere of the star, we derive a semi-theoretical projection factor for alpha Lup. We find a center-of-mass velocity of Vgamma = 7.9 +/- 0.6 km/s and that the velocity gradient in the atmosphere of alpha Lup isnull. We apply to alpha Lup the usual decomposition of the projection factor into three parts, p = p0 fgrad fog (originally developed for Cepheids), and derive a projection factor of p = 1.43 +/-0.01. By comparing our results with previous HARPS observations of classical Cepheids, we also point out a linear relation between the atmospheric velocity gradient and the amplitude of the radial velocity curve. Moreover, we observe a phase shift (Van Hoof effect), whereas alpha Lup has no velocity gradient.
△ Less
Submitted 31 May, 2013;
originally announced May 2013.
-
Understanding the dynamical structure of pulsating stars: The Baade-Wesselink projection factor of the delta Scuti stars AI Vel and beta Cas
Authors:
G. Guiglion,
N. Nardetto,
P. Mathias,
A. Domiciano de Souza,
E. Poretti,
M. Rainer,
A. Fokin,
D. Mourard,
W. Gieren
Abstract:
Aims. The Baade-Wesselink method of distance determination is based on the oscillations of pulsating stars. The key parameter of this method is the projection factor used to convert the radial velocity into the pulsation velocity. Our analysis was aimed at deriving for the first time the projection factor of delta Scuti stars, using high-resolution spectra of the high-amplitude pulsator AI Vel and…
▽ More
Aims. The Baade-Wesselink method of distance determination is based on the oscillations of pulsating stars. The key parameter of this method is the projection factor used to convert the radial velocity into the pulsation velocity. Our analysis was aimed at deriving for the first time the projection factor of delta Scuti stars, using high-resolution spectra of the high-amplitude pulsator AI Vel and of the fast rotator beta Cas. Methods. The geometric component of the projection factor (i.e. p0) was calculated using a limb-darkening model of the intensity distribution for AI Vel, and a fast-rotator model for beta Cas. Then, using SOPHIE/OHP data for beta Cas and HARPS/ESO data for AI Vel, we compared the radial velocity curves of several spectral lines forming at different levels in the atmosphere and derived the velocity gradient associated to the spectral-line-forming regions in the atmosphere of the star. This velocity gradient was used to derive a dynamical projection factor p. Results. We find a flat velocity gradient for both stars and finally p = p0 = 1.44 for AI Vel and p = p0 = 1.41 for beta Cas. By comparing Cepheids and delta Scuti stars, these results bring valuable insights into the dynamical structure of pulsating star atmospheres. They suggest that the period-projection factor relation derived for Cepheids is also applicable to delta Scuti stars pulsating in a dominant radial mode.
△ Less
Submitted 11 January, 2013;
originally announced January 2013.
-
A new interferometric study of four exoplanet host stars : θ Cygni, 14 Andromedae, {\upsilon} Andromedae and 42 Draconis
Authors:
R. Ligi,
D. Mourard,
A. M. Lagrange,
K. Perraut,
T. Boyajian,
Ph. Bério,
N. Nardetto,
I. Tallon-Bosc,
H. McAlister,
T. ten Brummelaar,
S. Ridgway,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
P. J. Goldfinger
Abstract:
Studying exoplanet host stars is of the utmost importance to establish the link between the presence of exoplanets around various types of stars and to understand the respective evolution of stars and exoplanets.
Using the limb-darkened diameter (LDD) obtained from interferometric data, we determine the fundamental parameters of four exoplanet host stars. We are particularly interested in the F4…
▽ More
Studying exoplanet host stars is of the utmost importance to establish the link between the presence of exoplanets around various types of stars and to understand the respective evolution of stars and exoplanets.
Using the limb-darkened diameter (LDD) obtained from interferometric data, we determine the fundamental parameters of four exoplanet host stars. We are particularly interested in the F4 main-sequence star, θ Cyg, for which Kepler has recently revealed solar-like oscillations that are unexpected for this type of star. Furthermore, recent photometric and spectroscopic measurements with SOPHIE and ELODIE (OHP) show evidence of a quasi-periodic radial velocity of \sim150 days. Models of this periodic change in radial velocity predict either a complex planetary system orbiting the star, or a new and unidentified stellar pulsation mode.
We performed interferometric observations of θ Cyg, 14 Andromedae, {\upsilon} Andromedae and 42 Draconis for two years with VEGA/CHARA (Mount Wilson, California) in several three-telescope configurations. We measured accurate limb darkened diameters and derived their radius, mass and temperature using empirical laws.
We obtain new accurate fundamental parameters for stars 14 And, {\upsilon} And and 42 Dra. We also obtained limb darkened diameters with a minimum precision of \sim 1.3%, leading to minimum planet masses of Msini=5.33\pm 0.57, 0.62 \pm 0.09 and 3.79\pm0.29 MJup for 14 And b, {\upsilon} And b and 42 Dra b, respectively. The interferometric measurements of θ Cyg show a significant diameter variability that remains unexplained up to now. We propose that the presence of these discrepancies in the interferometric data is caused by either an intrinsic variation of the star or an unknown close companion orbiting around it.
△ Less
Submitted 19 August, 2012;
originally announced August 2012.
-
The relationship between gamma Cassiopeiae's X-ray emission and its circumstellar environment
Authors:
M. A. Smith,
R. Lopes de Oliveira,
C. Motch,
G. W. Henry,
N. D. Richardson,
K. S. Bjorkman,
Ph. Stee,
D. Mourard,
J. D. Monnier,
X. Che,
R. Buecke,
E. Pollmann,
D. R. Gies,
G. H. Schaefer,
T. ten Brummelaar,
H. A. McAlister,
N. H. Turner,
J. Sturmann,
L. Sturmann,
S. T. Ridgway
Abstract:
γCas is the prototypical classical Be star and is best known for its variable hard X-ray emission. To elucidate the reasons for this emission, we mounted a multiwavelength campaign in 2010 centered around 4 XMM observations. The observational techniques included long baseline optical interferometry (LBOI), monitoring by an Automated Photometric Telescope and Halpha observations. Because gamma Cas…
▽ More
γCas is the prototypical classical Be star and is best known for its variable hard X-ray emission. To elucidate the reasons for this emission, we mounted a multiwavelength campaign in 2010 centered around 4 XMM observations. The observational techniques included long baseline optical interferometry (LBOI), monitoring by an Automated Photometric Telescope and Halpha observations. Because gamma Cas is also known to be in a binary, we measured Halpha radial velocities and redetermined its period as 203.55+/-0.2 days and an eccentricity near zero. The LBOI observations suggest that the star's decretion disk was axisymmetric in 2010, has an inclination angle near 45^o, and a larger radius than previously reported. The Be star began an "outburst" at the beginning of our campaign, made visible by a disk brightening and reddening during our campaign. Our analyses of the new high resolution spectra disclosed many attributes found from spectra obtained in 2001 (Chandra) and 2004 (XMM). As well as a dominant hot 14 keV thermal component, these familiar ones included: (i) a fluorescent feature of Fe K stronger than observed at previous times, (ii) strong lines of N VII and Ne XI lines indicative of overabundances, and (iii) a subsolar Fe abundance from K-shell lines but a solar abundance from L-shell ions. We also found that 2 absorption columns are required to fit the continuum. While the first one maintained its historical average of 1X10^21 cm^-2, the second was very large and doubled to 7.4X10^23 cm^-2 during our X-ray observations. Although we found no clear relation between this column density and orbital phase, it correlates well with the disk brightening and reddening both in the 2010 and earlier observations. Thus, the inference from this study is that much (perhaps all?) of the X-ray emission from this source originates behind matter ejected by gamma Cas into our line of sight.
△ Less
Submitted 30 January, 2012;
originally announced January 2012.
-
Tests with a Carlina-type diluted telescope; Primary coherencing
Authors:
H. Le Coroller,
J. Dejonghe,
X. Regal,
R. Sottile,
D. Mourard,
D. Ricci,
O. Lardiere,
A. Le Vansuu,
M. Boer,
M. De Becker,
J. M. Clausse,
C. Guillaume,
J. P. Meunier
Abstract:
Studies are under way to propose a new generation of post-VLTI interferometers. The Carlina concept studied at the Haute- Provence Observatory is one of the proposed solutions. It consists in an optical interferometer configured like a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed cospherical segments, a helium balloon (or cables suspended between t…
▽ More
Studies are under way to propose a new generation of post-VLTI interferometers. The Carlina concept studied at the Haute- Provence Observatory is one of the proposed solutions. It consists in an optical interferometer configured like a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed cospherical segments, a helium balloon (or cables suspended between two mountains), carries a gondola containing the focal optics. Since 2003, we have been building a technical demonstrator of this diluted telescope. First fringes were obtained in May 2004 with two closely-spaced primary segments and a CCD on the focal gondola. We have been testing the whole optical train with three primary mirrors. The main aim of this article is to describe the metrology that we have conceived, and tested under the helium balloon to align the primary mirrors separate by 5-10 m on the ground with an accuracy of a few microns. The servo loop stabilizes the mirror of metrology under the helium balloon with an accuracy better than 5 mm while it moves horizontally by 30 cm in open loop by 10-20 km/h of wind. We have obtained the white fringes of metrology; i.e., the three mirrors are aligned (cospherized) with an accuracy of {\approx} 1 micron. We show data proving the stability of fringes over 15 minutes, therefore providing evidence that the mechanical parts are stabilized within a few microns. This is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or under a balloon. Carlina, like the MMT or LBT, could be one of the first members of a new class of telescopes named diluted telescopes.
△ Less
Submitted 12 January, 2012;
originally announced January 2012.
-
The diameter of the CoRoT target HD 49933. Combining the 3D limb darkening, asteroseismology, and interferometry
Authors:
L. Bigot,
D. Mourard,
P. Berio,
F. Thévenin,
R. Ligi,
I. Tallon-Bosc,
O. Chesneau,
O. Delaa,
N. Nardetto,
K. Perraut,
Ph. Stee,
T. Boyajian,
P. Morel,
B. Pichon,
P. Kervella,
F. X. Schmider,
H. McAlister,
T. Ten Brummelaar,
S. T. Ridgway,
J. Sturmann,
L. Sturmann,
N. Turner,
C. Farrington,
P. J. Goldfinger
Abstract:
Context. The interpretation of stellar pulsations in terms of internal structure depends on the knowledge of the fundamental stellar parameters. Long-base interferometers permit us to determine very accurate stellar radii, which are independent constraints for stellar models that help us to locate the star in the HR diagram. Aims: Using a direct interferometric determination of the angular diamete…
▽ More
Context. The interpretation of stellar pulsations in terms of internal structure depends on the knowledge of the fundamental stellar parameters. Long-base interferometers permit us to determine very accurate stellar radii, which are independent constraints for stellar models that help us to locate the star in the HR diagram. Aims: Using a direct interferometric determination of the angular diameter and advanced three-dimensional (3D) modeling, we derive the radius of the CoRoT target HD 49933 and reduce the global stellar parameter space compatible with seismic data. Methods: The VEGA/CHARA spectro-interferometer is used to measure the angular diameter of the star. A 3D radiative hydrodynamical simulation of the surface is performed to compute the limb darkening and derive a reliable diameter from visibility curves. The other fundamental stellar parameters (mass, age, and Teff) are found by fitting the large and small p-mode frequency separations using a stellar evolution model that includes microscopic diffusion. Results: We obtain a limb-darkened angular diameter of θLD = 0.445 \pm 0.012 mas. With the Hipparcos parallax, we obtain a radius of R = 1.42 \pm 0.04 Rsun. The corresponding stellar evolution model that fits both large and small frequency separations has a mass of 1.20 \pm 0.08 Msun and an age of 2.7 Gy. The atmospheric parameters are Teff = 6640 \pm 100 K, log g = 4.21 \pm 0.14, and [Fe/H] = -0.38.
△ Less
Submitted 5 October, 2011;
originally announced October 2011.
-
The Baade-Wesselink p-factor applicable to LMC Cepheids
Authors:
N. Nardetto,
A. Fokin,
P. Fouqué,
J. Storm,
W. Gieren,
G. Pietrzynski,
D. Mourard,
P. Kervella
Abstract:
Context. Recent observations of LMC Cepheids bring new constraints on the slope of the period-projection factor relation (hereafter Pp relation) that is currently used in the Baade-Wesselink (hereafter BW) method of distance determination. The discrepancy between observations and theoretical analysis is particularly significant for short period Cepheids Aims. We investigate three physical effects…
▽ More
Context. Recent observations of LMC Cepheids bring new constraints on the slope of the period-projection factor relation (hereafter Pp relation) that is currently used in the Baade-Wesselink (hereafter BW) method of distance determination. The discrepancy between observations and theoretical analysis is particularly significant for short period Cepheids Aims. We investigate three physical effects that might possibly explain this discrepancy: (1) the spectroscopic S/N that is systematically lower for LMC Cepheids (around 10) compared to Galactic ones (up to 300), (2) the impact of the metallicity on the dynamical structure of LMC Cepheids, and (3) the combination of infrared photometry/interferometry with optical spectroscopy. Methods. To study the S/N we use a very simple toy model of Cepheids. The impact of metallicity on the projection factor is based on the hydrodynamical model of delta Cep already described in previous studies. This model is also used to derive the position of the optical versus infrared photospheric layers. Results. We find no significant effect of S/N, metallicity, and optical-versus-infrared observations on the Pp relation. Conclusions. The Pp relation of Cepheids in the LMC does not differ from the Galactic relation. This allows its universal application to determine distances to extragalactic Cepheids via BW analysis.
△ Less
Submitted 30 September, 2011;
originally announced September 2011.