-
SMARTY: The mileS Moderate resolution neAr-infRared sTellar librarY
Authors:
Michele Bertoldo-Coêlho,
Rogério Riffel,
Marina Trevisan,
Natacha Zanon Dametto,
Luis Dahmer-Hahn,
Paula Coelho,
Lucimara Martins,
Daniel Ruschel-Dutra,
Alexandre Vazdekis,
Alberto Rodríguez-Ardila,
Ana L. Chies-Santos,
Rogemar A. Riffel,
Francesco La Barbera,
Ignacio Martín Navarro,
Jesus Falcon Barroso,
Tatiana Moura
Abstract:
Most of the observed galaxies cannot be resolved into individual stars and are studied through their integrated spectrum using simple stellar populations (SSPs) models, with stellar libraries being a key ingredient in building them. Spectroscopic observations are increasingly being directed towards the near-infrared (NIR), where much is yet to be explored. SSPs in the NIR are still limited, and th…
▽ More
Most of the observed galaxies cannot be resolved into individual stars and are studied through their integrated spectrum using simple stellar populations (SSPs) models, with stellar libraries being a key ingredient in building them. Spectroscopic observations are increasingly being directed towards the near-infrared (NIR), where much is yet to be explored. SSPs in the NIR are still limited, and there are inconsistencies between different sets of models. One of the ways to minimize this problem is to have reliable NIR stellar libraries. The main goal of this work is to present SMARTY (mileS Moderate resolution neAr-infRared sTellar librarY) a ~0.9-2.4$μ$m stellar spectral library composed of 31 stars observed with the Gemini Near-IR Spectrograph (GNIRS) at the 8.1m Gemini North telescope and make it available to the community. The stars were chosen from the SMARTY library, for which the atmospheric parameters are reliable (and well tested), to populate different regions of the Hertzsprung-Russell (HR) diagram. Furthermore, five of these stars have NIR spectra available that we use to assess the quality of SMARTY. The remaining 26 stars are presented for the first time in the NIR. We compared the observed SMARTY spectra with synthetic and interpolated spectra, finding a mean difference of ~20% in the equivalent widths and ~1% in the overall continuum shape in both sets of comparisons. We computed the spectrophotometric broadband magnitudes and colours and compared them with the 2MASS ones, resulting in mean differences up to 0.07 and 0.10mag in magnitudes and colours, respectively. In general, a small difference was noted between the SMARTY spectra corrected using the continuum from the interpolated and the theoretical stars.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
The internal dynamics and environments of Relics and compact massive ETGs with TNG50
Authors:
Micheli T. Moura,
Ana L. Chies-Santos,
Cristina Furlanetto,
Ling Zhu,
Marco A. Canossa-Gosteinski
Abstract:
Relic galaxies are massive, compact, quiescent objects observed in the local Universe that have not experienced any significant interaction episodes or merger events since about $z = 2$, remaining relatively unaltered since their formation. On the other hand, massive and compact Early Type Galaxies (cETGs) in the local Universe appear to show similar properties to Relic galaxies, despite having su…
▽ More
Relic galaxies are massive, compact, quiescent objects observed in the local Universe that have not experienced any significant interaction episodes or merger events since about $z = 2$, remaining relatively unaltered since their formation. On the other hand, massive and compact Early Type Galaxies (cETGs) in the local Universe appear to show similar properties to Relic galaxies, despite having substantial accretion history. Relic galaxies, with frozen history, can provide important clues about the intrinsic processes related to the evolutionary pathways of ETGs and the role that mergers play in their evolution. Using the high-resolution cosmological simulation TNG50-1 from the Illustris Project, we investigate the assembly history of a sample of massive, compact, old, and quiescent subhalos split by satellite accretion fraction. We compare the evolutionary pathways at three cosmic epochs: $z = 2$, $z = 1.5$, and $z = 0$, using the orbital decomposition numerical method to investigate the stellar dynamics of each galactic kinematical component and their environmental correlations. Our results point to a steady pathway across time that is not strongly dependent on the environment. Relics and cETGs do not show a clear preference for high or low-density environments within the volume explored at TNG50. However, progenitors of Relic galaxies are shown to be located in high density since $z = 2$. The merger history can be recovered from the hot inner stellar halo imprints in the local Universe. In the current scenario, the mergers that drive the growth of cETGs do not give rise to a new and distinct evolutionary pathway when compared to Relics. This is despite the reported effects on the age and metallicity of the kinematic components.
△ Less
Submitted 5 January, 2024;
originally announced January 2024.
-
Precise in situ radius measurement of individual optically trapped microspheres using negative optical torque exerted by focused vortex beams
Authors:
Kainã Diniz,
Tanja Schoger,
Guilherme T. Moura,
Arthur L. Fonseca,
Diney S. Ether Jr,
Rafael S. Dutra,
Gert-Ludwig Ingold,
Nathan B. Viana,
Paulo A. Maia Neto
Abstract:
We demonstrate a new method for determining the radius of micron-sized particles trapped by a vortex laser beam. The technique is based on measuring the rotation experienced by the center of mass of a microsphere that is laterally displaced by a Stokes drag force to an off-axis equilibrium position. The rotation results from an optical torque pointing along the direction opposite to the vortex bea…
▽ More
We demonstrate a new method for determining the radius of micron-sized particles trapped by a vortex laser beam. The technique is based on measuring the rotation experienced by the center of mass of a microsphere that is laterally displaced by a Stokes drag force to an off-axis equilibrium position. The rotation results from an optical torque pointing along the direction opposite to the vortex beam angular momentum. We fit the rotation angle data for different Laguerre-Gaussian modes taking the radius as a fitting parameter in the Mie-Debye theory of optical tweezers. We also discuss how micron-sized beads can be used as probes for optical aberrations introduced by the experimental setup.
△ Less
Submitted 28 December, 2023;
originally announced December 2023.
-
Tailoring bistability in optical tweezers with vortex beams and spherical aberration
Authors:
Arthur Luna da Fonseca,
Kainã Diniz,
Paula Borges Monteiro,
Luís Barbosa Pires,
Guilherme Tenório Moura,
Mateus Borges,
Rafael de Sousa Dutra,
Diney Soares Ether Jr,
Nathan Bessa Viana,
Paulo Américo Maia Neto
Abstract:
We demonstrate a bistable optical trap by tightly focusing a vortex laser beam. The optical potential has the form of a Mexican hat with an additional minimum at the center. The bistable trap** corresponds to a non-equilibrium steady state (NESS), where the microsphere continually hops, due to thermal activation, between an axial equilibrium state and an orbital state driven by the optical torqu…
▽ More
We demonstrate a bistable optical trap by tightly focusing a vortex laser beam. The optical potential has the form of a Mexican hat with an additional minimum at the center. The bistable trap** corresponds to a non-equilibrium steady state (NESS), where the microsphere continually hops, due to thermal activation, between an axial equilibrium state and an orbital state driven by the optical torque. We develop a theoretical model for the optical force field, based entirely on experimentally accessible parameters, combining a Debye-type non-paraxial description of the focused vortex beam with Mie scattering by the microsphere. The theoretical prediction that the microsphere and the annular laser focal spot should have comparable sizes is confirmed experimentally by taking different values for the topological charge of the vortex beam. Spherical aberration introduced by refraction at the interface between the glass slide and the sample is taken into account and allows to fine tune between axial, bistable and orbital states as the sample is shifted with respect to the objective focal plane. We find an overall agreement between theory and experiment for a rather broad range of topological charges. Our results open the way for applications in stochastic thermodynamics as it establishes a new control parameter, the height of the objective focal plane with respect to the glass slide, that allows to shape the optical force field in real time and in a controllable way.
△ Less
Submitted 8 November, 2023;
originally announced November 2023.
-
Optical trap** and manipulation of fluorescent polymer-based nanostructures: measuring optical properties of materials in the nanoscale range
Authors:
T. A. Moura,
M. L. Lana Júnior,
C. H. V. da Silva,
L. R. Américo,
J. B. S. Mendes,
M. C. N. P. Brandão,
A. G. S. Subtil,
M. S. Rocha
Abstract:
We present a novel approach to determine the optical properties of materials in the nanoscale range using optical tweezers (OT). Fluorescent polymer-based nanostructures (pdots) are optically trapped in a Gaussian beam OT and the trap stiffness is studied as a function of various parameters of interest. We explicitly show that properties such as the refractive index and the optical anisotropy of t…
▽ More
We present a novel approach to determine the optical properties of materials in the nanoscale range using optical tweezers (OT). Fluorescent polymer-based nanostructures (pdots) are optically trapped in a Gaussian beam OT and the trap stiffness is studied as a function of various parameters of interest. We explicitly show that properties such as the refractive index and the optical anisotropy of these nanostructures can be determined with high accuracy by comparing the experimental data to an optical force model. In particular, we demonstrate that the effective optical properties of these pdots can be modulated by changing the light wavelength that excites the sample, opening the door for a fine tuning of their optical response, with possible applications in the development of new sensors and/or other optoelectronic devices.
△ Less
Submitted 31 October, 2023; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Dynamics around the binary system (65803) Didymos
Authors:
R. Machado Oliveira,
O. C. Winter,
R. Sfair,
G. Valvano,
T. S. Moura,
G. Borderes-Motta
Abstract:
Didymos and Dimorphos are primary and secondary, respectively, asteroids who compose a binary system that make up the set of Near Earth Asteroids (NEAs). They are targets of the Double Asteroid Redirection Test (DART), the first test mission dedicated to study of planetary defense, for which the main goal is to measure the changes caused after the secondary body is hit by a kinect impactor. The pr…
▽ More
Didymos and Dimorphos are primary and secondary, respectively, asteroids who compose a binary system that make up the set of Near Earth Asteroids (NEAs). They are targets of the Double Asteroid Redirection Test (DART), the first test mission dedicated to study of planetary defense, for which the main goal is to measure the changes caused after the secondary body is hit by a kinect impactor. The present work intends to conduct a study, through numerical integrations, on the dynamics of massless particles distributed in the vicinity of the two bodies. An approximate shape for the primary body was considered as a model of mass concentrations (mascons) and the secondary was considered as a massive point. Our results show the location and size of stable regions, and also their lifetime.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
On the use of organic semiconductors as handles for optical tweezers experiments: trap** and manipulating polyaniline (PANI) microparticles
Authors:
Kairon M. Oliveira,
Tiago A. Moura,
Janaisa L. C. Lucas,
Alvaro V. N. C. Teixeira,
Marcio S. Rocha,
Joaquim B. S. Mendes
Abstract:
Here we propose the use of the organic semiconductor polyaniline (PANI) for the preparation of spherical-shaped microparticles to serve as handles in optical tweezers (OT) experiments. The stable trap** and manipulation of PANI beads was demonstrated for the first time, using a Gaussian ($TEM_{00}$) beam optical tweezers. The trap stiffness was characterized for various different parameters such…
▽ More
Here we propose the use of the organic semiconductor polyaniline (PANI) for the preparation of spherical-shaped microparticles to serve as handles in optical tweezers (OT) experiments. The stable trap** and manipulation of PANI beads was demonstrated for the first time, using a Gaussian ($TEM_{00}$) beam optical tweezers. The trap stiffness was characterized for various different parameters such as the bead radius, the laser power and the distance between the bead and the coverslip of the sample chamber, attesting the viability of using such material for optical manipulation. Since the effective optical properties of PANI can be modulated by the synthesis process, new related applications are also proposed. The results of the present work therefore open the door for using semiconductor polymeric materials in OT applications.
△ Less
Submitted 5 March, 2023;
originally announced March 2023.
-
Abundance analysis of APOGEE spectra for 58 metal-poor stars from the bulge spheroid
Authors:
R. Razera,
B. Barbuy,
T. C. Moura,
H. Ernandes,
A. Pérez-Villegas,
S. O. Souza,
C. Chiappini,
A. B. A. Queiroz,
F. Anders,
J. G. Fernández-Trincado,
A. C. S. Friaça,
K. Cunha,
V. V. Smith,
B. X. Santiago,
R. P. Schiavon,
M. Valentini,
D. Minniti,
M. Schultheis,
D. Geisler,
J. Sobeck,
V. M Placco,
M. Zoccali
Abstract:
The central part of the Galaxy host a multitude of stellar populations, including the spheroidal bulge stars, stars moved to the bulge through secular evolution of the bar, inner halo, inner thick disk, inner thin disk, as well as debris from past accretion events. We identified a sample of 58 candidate stars belonging to the stellar population of the spheroidal bulge, and analyse their abundances…
▽ More
The central part of the Galaxy host a multitude of stellar populations, including the spheroidal bulge stars, stars moved to the bulge through secular evolution of the bar, inner halo, inner thick disk, inner thin disk, as well as debris from past accretion events. We identified a sample of 58 candidate stars belonging to the stellar population of the spheroidal bulge, and analyse their abundances. The present calculations of Mg, Ca, and Si lines are in agreement with the APOGEE-ASPCAP abundances, whereas abundances of C, N, O, and Ce are re-examined. We find normal $α$-element enhancements in oxygen, similar to magnesium, Si, and Ca abundances, which are typical of other bulge stars surveyed in the optical in Baade's Window. The enhancement of [O/Fe] in these stars suggests that they do not belong to accreted debris. No spread in N abundances is found, and none of the sample stars is N-rich, indicating that these stars are not second generation stars originated in globular clusters. Ce instead is enhanced in the sample stars, which points to an s-process origin such as due to enrichment from early generations of massive fast rotating stars, the so-called spinstars
△ Less
Submitted 14 September, 2022; v1 submitted 13 August, 2022;
originally announced August 2022.
-
APOPHIS -- Effects of the 2029 Earth's Encounter on the Surface and Nearby Dynamics
Authors:
Giulia Valvano,
Othon Cabo Winter,
Rafael Sfair,
Gabriel Borderes-Motta 2,
Rai Machado,
Tamires Moura
Abstract:
The 99942 Apophis close encounter with Earth in 2029 may provide information about asteroid's physical characteristics and measurements of Earth's effects on the asteroid surface. In this work, we analysed the surface and the nearby dynamics of Apophis. The possible effects of its 2029 encounter on the surface and environment vicinity are also analysed. We consider a 340 metres polyhedron with a u…
▽ More
The 99942 Apophis close encounter with Earth in 2029 may provide information about asteroid's physical characteristics and measurements of Earth's effects on the asteroid surface. In this work, we analysed the surface and the nearby dynamics of Apophis. The possible effects of its 2029 encounter on the surface and environment vicinity are also analysed. We consider a 340 metres polyhedron with a uniform density (1.29 g$\cdot$cm$^{-3}$, 2.2 g$\cdot$cm$^{-3}$ and 3.5 g$\cdot$cm$^{-3}$). The slope angles are computed, as well their variation that arises during the close approach. Such variation reaches 4$^{\circ}$ when low densities are used in our simulations and reaches 2$^{\circ}$ when the density is high. The zero-velocity curves, the equilibrium points, and their topological classification are obtained. We found four external equilibrium points and two of them are linearly stable. We also perform numerical simulations of bodies orbiting the asteroid, taking into account the irregular gravitational field of Apophis and two extra scenarios of perturbations: the solar radiation pressure and the Earth's perturbation during the close approach. The radiation pressure plays an important role in the vicinity of the asteroid, only cm-sized particles survived for the time of integration. For densities of 2.2 g$\cdot$cm$^{-3}$ and 3.5 g$\cdot$cm$^{-3}$, a region of 5 cm radius particles survived for 30 years of the simulation, and for 1.29 g$\cdot$cm$^{-3}$, only particles with 15 cm of radius survived. The ejections and collisions are about 30-50 times larger when the close encounter effect is added, but around 56-59% of particles still survive the encounter.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
Refined physical parameters for Chariklo's body and rings from stellar occultations observed between 2013 and 2020
Authors:
B. E. Morgado,
B. Sicardy,
F. Braga-Ribas,
J. Desmars,
A. R. Gomes-Júnior,
D. Bérard,
R. Leiva,
J. L. Ortiz,
R. Vieira-Martins,
G. Benedetti-Rossi,
P. Santos-Sanz,
J. I. B. Camargo,
R. Duffard,
F. L. Rommel,
M. Assafin,
R. C. Boufleur,
F. Colas,
M. Kretlow,
W. Beisker,
R. Sfair,
C. Snodgrass,
N. Morales,
E. Fernández-Valenzuela,
L. S. Amaral,
A. Amarante
, et al. (56 additional authors not shown)
Abstract:
The Centaur (10199) Chariklo has the first rings system discovered around a small object. It was first observed using stellar occultation in 2013. Stellar occultations allow the determination of sizes and shapes with kilometre accuracy and obtain characteristics of the occulting object and its vicinity. Using stellar occultations observed between 2017 and 2020, we aim at constraining Chariklo's an…
▽ More
The Centaur (10199) Chariklo has the first rings system discovered around a small object. It was first observed using stellar occultation in 2013. Stellar occultations allow the determination of sizes and shapes with kilometre accuracy and obtain characteristics of the occulting object and its vicinity. Using stellar occultations observed between 2017 and 2020, we aim at constraining Chariklo's and its rings physical parameters. We also determine the rings' structure, and obtain precise astrometrical positions of Chariklo. We predicted and organised several observational campaigns of stellar occultations by Chariklo. Occultation light curves were measured from the data sets, from which ingress and egress times, and rings' width and opacity were obtained. These measurements, combined with results from previous works, allow us to obtain significant constraints on Chariklo's shape and rings' structure. We characterise Chariklo's ring system (C1R and C2R), and obtain radii and pole orientations that are consistent with, but more accurate than, results from previous occultations. We confirmed the detection of W-shaped structures within C1R and an evident variation of radial width. The observed width ranges between 4.8 and 9.1 km with a mean value of 6.5 km. One dual observation (visible and red) does not reveal any differences in the C1R opacity profiles, indicating ring particle's size larger than a few microns. The C1R ring eccentricity is found to be smaller than 0.022 (3-sigma), and its width variations may indicate an eccentricity higher than 0.005. We fit a tri-axial shape to Chariklo's detections over eleven occultations and determine that Chariklo is consistent with an ellipsoid with semi-axes of 143.8, 135.2 and 99.1 km. Ultimately, we provided seven astrometric positions at a milliarcseconds accuracy level, based on Gaia EDR3, and use it to improve Chariklo's ephemeris.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Gemini/Phoenix H-band analysis of the globular cluster AL3
Authors:
B. Barbuy,
H. Ernandes,
S. O. Souza,
R. Razera,
T. Moura,
J. Meléndez,
A. Pérez-Villegas,
M. Zoccali,
D. Minniti,
B. Dias,
S. Ortolani,
E. Bica
Abstract:
The globular cluster AL~3 is old and located in the inner bulge. Three individual stars were observed with the Phoenix spectrograph at the Gemini South telescope. The wavelength region contains prominent lines of CN, OH, and CO, allowing the derivation of C, N, and O abundances of cool stars. We aim to derive C, N, O abundances of three stars in the bulge globular cluster AL3, and additionally in…
▽ More
The globular cluster AL~3 is old and located in the inner bulge. Three individual stars were observed with the Phoenix spectrograph at the Gemini South telescope. The wavelength region contains prominent lines of CN, OH, and CO, allowing the derivation of C, N, and O abundances of cool stars. We aim to derive C, N, O abundances of three stars in the bulge globular cluster AL3, and additionally in stars of NGC 6558 and HP1. The spectra of AL3 allows us to derive the cluster's radial velocity. For AL3, we applied a new code to analyse its colour-magnitude diagram. Synthetic spectra were computed and compared to observed spectra for the three clusters. We present a detailed identification of lines in the spectral region centred at 15555 A, covering the wavelength range 15525-15590 A. C, N, and O abundances are tentatively derived for the sample stars.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
Simulations of the merging galaxy cluster Abell 2034: what determines the level of separation between gas and dark matter
Authors:
Micheli T. Moura,
Rubens E. G. Machado,
Rogério Monteiro-Oliveira
Abstract:
Cluster mergers are an important laboratory for studying the behaviour of dark matter (DM) and intracluster gas. There are dissociative collisions that can separate the intracluster gas from the DM. Abell 2034 presents clear dissociative features observed by X-rays and gravitational lensing. The cluster, at $z$ = 0.114, consists of two substructures with mass ratio of about 1:2.2, separated by…
▽ More
Cluster mergers are an important laboratory for studying the behaviour of dark matter (DM) and intracluster gas. There are dissociative collisions that can separate the intracluster gas from the DM. Abell 2034 presents clear dissociative features observed by X-rays and gravitational lensing. The cluster, at $z$ = 0.114, consists of two substructures with mass ratio of about 1:2.2, separated by $\sim$720 kpc. The X-ray emission peak is offcentred from the south DM peak by $\sim$350 kpc. Using N-body hydrodynamical simulations, we aim to reconstruct the dynamic history of the collision, reproducing the observed features, and also to explore the conditions that led to the dissociation. Our best model assuming that the collision is close to the plane of the sky, with a small impact parameter, observed 0.26 Gyr after central passage, reproduces the observed features of this cluster, such as the offset between X-ray and DM peaks, X-ray morphology and temperatures. We explored several variations using different gas and DM concentrations for each cluster. The level of dissociation was quantified by the distances between X-ray and DM peaks, and also by the gas retention in the cluster cores. We found that the ratio of central gas densities is more important than the ratio of central DM densities in determining the level of dissociation.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Baryogenesis in cosmological models with symmetric and asymmetric quantum bounces
Authors:
P. C. M. Delgado,
M. B. Jesus,
N. Pinto-Neto,
T. Mourão,
G. S. Vicente
Abstract:
The baryon-antibaryon asymmetry (excess of matter over antimatter in our Universe), indicated by observational data from the Cosmic Microwave Background anisotropies, predictions of primordial Nucleosynthesis, and the absence of intense radiation from matter-antimatter annihilation, constitutes an unsolved puzzle in cosmology. Two mechanisms for baryon asymmetry have been proposed as extensions of…
▽ More
The baryon-antibaryon asymmetry (excess of matter over antimatter in our Universe), indicated by observational data from the Cosmic Microwave Background anisotropies, predictions of primordial Nucleosynthesis, and the absence of intense radiation from matter-antimatter annihilation, constitutes an unsolved puzzle in cosmology. Two mechanisms for baryon asymmetry have been proposed as extensions of the Standard Model of Particle Physics at high energies. They rely on new couplings involving the baryon number current, one with a scalar field, called Spontaneous Baryogenesis, and the other with space-time curvature, named Gravitational Baryogenesis. These two mechanisms are investigated in the context of many bouncing scenarios, either symmetric or asymmetric around the bounce. It is shown that the constraints on the free parameters of these scenarios, imposed to yield the observed baryon-to-entropy ratio, are mild, already containing the values compatible with other observational constraints coming from the features of the power spectra of cosmological perturbations. Hence, realistic bouncing models can yield the observed baryon-antibaryon asymmetry if one of the two mechanisms proposed takes place in nature.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
The dynamical state of Abell 2399: a bullet-like cluster
Authors:
Ana C. C. Lourenço,
P. A. A. Lopes,
T. F. Laganá,
R. S. Nascimento,
R. E. G. Machado,
M. T. Moura,
Y. L. Jaffé,
A. L. Ribeiro,
B. Vulcani,
A. Moretti,
L. A. Riguccini
Abstract:
While there are many ways to identify substructures in galaxy clusters using different wavelengths, each technique has its own caveat. In this paper, we conduct a detailed substructure search and dynamical state characterisation of Abell 2399, a galaxy cluster in the local Universe ($z \sim 0.0579$), by performing a multi-wavelength analysis and testing the results through hydro-dynamical simulati…
▽ More
While there are many ways to identify substructures in galaxy clusters using different wavelengths, each technique has its own caveat. In this paper, we conduct a detailed substructure search and dynamical state characterisation of Abell 2399, a galaxy cluster in the local Universe ($z \sim 0.0579$), by performing a multi-wavelength analysis and testing the results through hydro-dynamical simulations. In particular, we apply a Gaussian Mixture Model to the spectroscopic data from SDSS, WINGS, and Omega WINGS Surveys to identify substructures. We further use public \textit{XMM-Newton} data to investigate the intracluster medium (ICM) thermal properties, creating temperature, metallicity, entropy, and pressure maps. Finally, we run hydro-dynamical simulations to constrain the merger stage of this system. The ICM is very asymmetrical and has regions of temperature and pressure enhancement that evidence a recent merging process. The optical substructure analysis retrieves the two main X-ray concentrations. The temperature, entropy, and pressure are smaller in the secondary clump than in the main clump. On the other hand, its metallicity is considerably higher. This result can be explained by the scenario found by the hydro-dynamical simulations where the secondary clump passed very near to the centre of the main cluster possibly causing the galaxies of that region to release more metals through the increase of ram-pressure strip**.16
△ Less
Submitted 2 September, 2020;
originally announced September 2020.
-
Asteroid triple system 2001 SN263 : surfaces characteristics and dynamical environment
Authors:
O. C. Winter,
G. Valvano,
T. S. Moura,
G. Borderes-Motta,
A. Amarante,
R. Sfair
Abstract:
The (153591) 2001 SN263 asteroid system, target of the first Brazilian interplanetary space mission, is one of the known three triple systems within the population of NEAs. One of the mission objectives is to collect data about the formation of this system. The analysis of these data will help in the investigation of the physical and dynamical structures of the components (Alpha, Beta and Gamma) o…
▽ More
The (153591) 2001 SN263 asteroid system, target of the first Brazilian interplanetary space mission, is one of the known three triple systems within the population of NEAs. One of the mission objectives is to collect data about the formation of this system. The analysis of these data will help in the investigation of the physical and dynamical structures of the components (Alpha, Beta and Gamma) of this system, in order to find vestiges related to its origin. In this work, we assume the irregular shape of the 2001 SN263 system components as uniform density polyhedra and computationally investigate the gravitational field generated by these bodies. The goal is to explore the dynamical characteristics of the surface and environment around each component. Then, taking into account the rotational speed, we analyze their topographic features through the quantities geometric altitude, tilt, geopotential, slope, surface accelerations, among others. Additionally, the investigation of the environment around the bodies made it possible to construct zero-velocity curves, which delimit the location of equilibrium points. The Alpha component has a peculiar number of 12 equilibrium points, all of them located very close to its surface. In the cases of Beta and Gamma, we found four equilibrium points not so close to their surfaces. Then, performing numerical experiments around their equilibrium points, we identified the location and size of just one stable region, which is associated with an equilibrium point around Beta. Finally, we integrated a spherical cloud of particles around Alpha and identified the location on the surface of Alpha were the particles have fallen.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Dynamical Environment and Surface Characteristics of Asteroid (16) Psyche
Authors:
T. S. Moura,
O. C. Winter,
A. Amarante,
R. Sfair,
G. Borderes-Motta,
G. Valvano
Abstract:
Radar observations show that (16) Psyche is one of the largest and most massive asteroids of the M-class located in the main belt, with a diameter of approximately 230 km. This fact makes Psyche a unique object since observations indicated an iron-nickel composition. It is believed that this body may be what was left of a metal core of an early planet that would have been fragmented over millions…
▽ More
Radar observations show that (16) Psyche is one of the largest and most massive asteroids of the M-class located in the main belt, with a diameter of approximately 230 km. This fact makes Psyche a unique object since observations indicated an iron-nickel composition. It is believed that this body may be what was left of a metal core of an early planet that would have been fragmented over millions of years due to violent collisions. In this work we study a variety of dynamical aspects related to the surface, as well as, the environment around this asteroid. We use computational tools to explore the gravitational field generated by this body, assuming constant values for its density and rotation period. We then determine a set of physical and dynamical characteristics over its entire surface. The results include the geometric altitude, geopotential altitude, tilt, slope, among others. We also explore the neighborhood around the asteroid (16) Psyche, so that the location and linear stability of the equilibrium points were found. We found four external equilibrium points, two of them linearly stable. We confirmed the stability of these points by performing numerical simulations of massless particles around the asteroid, which also showed an asymmetry in the size of the stable regions. In addition, we integrate a cloud of particles in the vicinity of (16) Psyche in order to verify in which regions of its surface the particles are most likely to collide.
△ Less
Submitted 23 March, 2020;
originally announced March 2020.
-
Stellar Population Properties of ETGs in Compact Groups of Galaxies
Authors:
Tatiana C. Moura,
Reinaldo R. de Carvalho,
Sandro B. Rembold,
Marina Trevisan,
Andre L. B. Ribeiro,
Angeles Pérez-Villegas,
Francesco La Barbera,
Diego H. Stalder,
Reinaldo R. Rosa
Abstract:
We present results on the study of the stellar population in Early-Type galaxies (ETGs) belonging to 151 Compact Groups (CGs). We also selected a field sample composed of 846 ETGs to investigate environmental effects on galaxy evolution. We find that the dependences of mean stellar ages, [Z/H] and [$α$/Fe] on central stellar velocity dispersion are similar, regardless where the ETG resides, CGs or…
▽ More
We present results on the study of the stellar population in Early-Type galaxies (ETGs) belonging to 151 Compact Groups (CGs). We also selected a field sample composed of 846 ETGs to investigate environmental effects on galaxy evolution. We find that the dependences of mean stellar ages, [Z/H] and [$α$/Fe] on central stellar velocity dispersion are similar, regardless where the ETG resides, CGs or field. When compared to the sample of centrals and satellites from the literature, we find that ETGs in GCs behave similarly to centrals, especially those embedded in low-mass haloes ($M_{h} < 10^ {12.5}M_{\odot}$). Except for the low-mass limit, where field galaxies present a Starforming signature, not seen in CGs, the ionization agent of the gas in CG and field galaxies seem to be similar and due to hot, evolved low-mass stars. However, field ETGs present an excess of H$α$ emission relative to ETGs in CGs. Additionally, we performed a dynamical analysis, which shows that CGs present a bimodality in the group velocity dispersion distribution - a high and low-$σ$ mode. Our results indicate that high-$σ$ groups have a smaller fraction of spirals, shorter crossing times, and a more luminous population of galaxies than the low $σ$ groups. It is important to emphasize that our findings point to a small environmental impact on galaxies located in CGs. The only evidence we find is the change in gas content, suggesting environmentally-driven gas loss.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Integrated Spectra of Milky Way Globular Cluster
Authors:
Tatiana Coelho de Moura,
Marina Trevisan,
Beatriz Barbuy,
Silvia Rossi
Abstract:
Integrated spectra of Milky Way globular clusters (GCs) are reproduced by computing synthetic spectra taking into account individual element abundances. Five clusters were selected from their location in the Galactic bulge, for which integrated spectra were available in the WiFeS Atlas of Galactic Globular Cluster Spectra project. Our aim is to further study the oldest GC located in the Galactic b…
▽ More
Integrated spectra of Milky Way globular clusters (GCs) are reproduced by computing synthetic spectra taking into account individual element abundances. Five clusters were selected from their location in the Galactic bulge, for which integrated spectra were available in the WiFeS Atlas of Galactic Globular Cluster Spectra project. Our aim is to further study the oldest GC located in the Galactic bulge, with metallicity in the range $-$1.6$<$[Fe/H]$<$$-$0.7. We also include the halo cluster NGC 6752 for comparison purposes. We reproduce the full spectra in the range 4500-9000 $\mathring{A}$ available in these observed spectra, as well as individual lines of Na, Mg, Al, Si, Ca, Ti, Ba, and Eu. We report a list of lines that are suitable for abundance derivation, and by adopting these abundances we are able to fit the dam** parameters that define the wings of strong lines of well-known triplets of Mg I and Ca II. Finally, the effect of multiple stellar populations through enhanced Na abundances is tested.
△ Less
Submitted 4 November, 2019;
originally announced November 2019.
-
The Mass Density Profile and Star Formation History of Gaussian and Non-Gaussian Clusters
Authors:
R. R. de Carvalho,
A. P. Costa,
T. C. Moura,
A. L. B. Ribeiro
Abstract:
This paper is the third of a series in which we investigate the discrimination between Gaussian (G) and Non-Gaussian (NG) clusters, based on the velocity distribution of the member galaxies. We study a sample of 177 groups from the Yang catalog in the redshift interval of 0.03 $\le$ z $\le$ 0.1 and masses $\ge$ 10$^{14} \rm M_{\odot}$. Examining the projected stellar mass density distributions of…
▽ More
This paper is the third of a series in which we investigate the discrimination between Gaussian (G) and Non-Gaussian (NG) clusters, based on the velocity distribution of the member galaxies. We study a sample of 177 groups from the Yang catalog in the redshift interval of 0.03 $\le$ z $\le$ 0.1 and masses $\ge$ 10$^{14} \rm M_{\odot}$. Examining the projected stellar mass density distributions of G and NG groups we find strong evidence of a higher infall rate in the outskirts of NG groups over the G ones. There is a 61\% excess of faint galaxies in NGs when contrasted with G groups, when integrating $\rm from ~ 0.8 ~to~ 2.0R/R_{200}$. The study of the Star Formation History (SFH) of ellipticals and spirals in the three main regions of the Projected Phase Space (PPS) reveals also that the star formation in faint spirals of NG groups is significantly different from their counterpart in the G groups. The assembled mass for Faint spirals varies from 59\% at 12.7 Gyr to 75\% at 8.0 Gyr, while in G systems this variation is from 82\% to 91\%. This finding may also be interpreted as a higher infall rate of gas rich systems in NG groups. This accretion process through the filaments, disturbing the velocity distribution and modifying not only the stellar population of the incoming galaxies but also their SFH, should be seriously considered in modelling galaxy evolution.
△ Less
Submitted 31 May, 2019;
originally announced June 2019.
-
Evaluating Competence Measures for Dynamic Regressor Selection
Authors:
Thiago J. M. Moura,
George D. C. Cavalcanti,
Luiz S. Oliveira
Abstract:
Dynamic regressor selection (DRS) systems work by selecting the most competent regressors from an ensemble to estimate the target value of a given test pattern. This competence is usually quantified using the performance of the regressors in local regions of the feature space around the test pattern. However, choosing the best measure to calculate the level of competence correctly is not straightf…
▽ More
Dynamic regressor selection (DRS) systems work by selecting the most competent regressors from an ensemble to estimate the target value of a given test pattern. This competence is usually quantified using the performance of the regressors in local regions of the feature space around the test pattern. However, choosing the best measure to calculate the level of competence correctly is not straightforward. The literature of dynamic classifier selection presents a wide variety of competence measures, which cannot be used or adapted for DRS. In this paper, we review eight measures used with regression problems, and adapt them to test the performance of the DRS algorithms found in the literature. Such measures are extracted from a local region of the feature space around the test pattern, called region of competence, therefore competence measures.To better compare the competence measures, we perform a set of comprehensive experiments of 15 regression datasets. Three DRS systems were compared against individual regressor and static systems that use the Mean and the Median to combine the outputs of the regressors from the ensemble. The DRS systems were assessed varying the competence measures. Our results show that DRS systems outperform individual regressors and static systems but the choice of the competence measure is problem-dependent.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Germanium microparticles as optically induced oscillators in optical tweezers
Authors:
W. H. Campos,
T. A. Moura,
O. J. B. J. Marques,
J. M. Fonseca,
W. A. Moura-Melo,
M. S. Rocha,
J. B. S. Mendes
Abstract:
Oscillatory dynamics is a key tool in optical tweezers applications. It is usually implemented by mechanical interventions that cannot be optically controlled. In this work we show that Germanium semiconductor beads behave as optically induced oscillators when subjected to a highly focused laser beam. Such unusual motion is due to the competition between the usual optical forces [1-3] and the radi…
▽ More
Oscillatory dynamics is a key tool in optical tweezers applications. It is usually implemented by mechanical interventions that cannot be optically controlled. In this work we show that Germanium semiconductor beads behave as optically induced oscillators when subjected to a highly focused laser beam. Such unusual motion is due to the competition between the usual optical forces [1-3] and the radiometric force related to thermal effects, which pushes the beads from the focal region [4]. We characterize the behavior of the Germanium beads in detail and propose a model accounting for the related forces, in good agreement with the experimental data. The well defined direction of oscillations can be manipulated by the polarization of the light beam. Such kind of system can potentially revolutionize the field of optical manipulation, contributing to the design of single molecule machines and the application of oscillatory forces in macromolecules and other soft matter systems.
△ Less
Submitted 28 March, 2019;
originally announced March 2019.
-
Machine and Deep Learning Applied to Galaxy Morphology -- A Comparative Study
Authors:
P. H. Barchi,
R. R. de Carvalho,
R. R. Rosa,
R. Sautter,
M. Soares-Santos,
B. A. D. Marques,
E. Clua,
T. S. Gonçalves,
C. de Sá-Freitas,
T. C. Moura
Abstract:
Morphological classification is a key piece of information to define samples of galaxies aiming to study the large-scale structure of the universe. In essence, the challenge is to build up a robust methodology to perform a reliable morphological estimate from galaxy images. Here, we investigate how to substantially improve the galaxy classification within large datasets by mimicking human classifi…
▽ More
Morphological classification is a key piece of information to define samples of galaxies aiming to study the large-scale structure of the universe. In essence, the challenge is to build up a robust methodology to perform a reliable morphological estimate from galaxy images. Here, we investigate how to substantially improve the galaxy classification within large datasets by mimicking human classification. We combine accurate visual classifications from the Galaxy Zoo project with machine and deep learning methodologies. We propose two distinct approaches for galaxy morphology: one based on non-parametric morphology and traditional machine learning algorithms; and another based on Deep Learning. To measure the input features for the traditional machine learning methodology, we have developed a system called CyMorph, with a novel non-parametric approach to study galaxy morphology. The main datasets employed comes from the Sloan Digital Sky Survey Data Release 7 (SDSS-DR7). We also discuss the class imbalance problem considering three classes. Performance of each model is mainly measured by Overall Accuracy (OA). A spectroscopic validation with astrophysical parameters is also provided for Decision Tree models to assess the quality of our morphological classification. In all of our samples, both Deep and Traditional Machine Learning approaches have over 94.5% OA to classify galaxies in two classes (elliptical and spiral). We compare our classification with state-of-the-art morphological classification from literature. Considering only two classes separation, we achieve 99% of overall accuracy in average when using our deep learning models, and 82% when using three classes. We provide a catalog with 670,560 galaxies containing our best results, including morphological metrics and classification.
△ Less
Submitted 1 November, 2019; v1 submitted 21 January, 2019;
originally announced January 2019.
-
Uma técnica para a quantificação do esforço de merge
Authors:
Tayane Silva Fernandes de Moura,
Leonardo Gresta Paulino Murta
Abstract:
Developers that use version control systems can work in parallel with other developers and merge their versions afterwards. Sometimes these merges fail, demanding manual intervention to resolve conflicts. Some studies aim at analyzing the merges failures, however, there is a lack of tool support in the literature to measure the merge effort, jeopardizing such kind of analyses. In this article, we…
▽ More
Developers that use version control systems can work in parallel with other developers and merge their versions afterwards. Sometimes these merges fail, demanding manual intervention to resolve conflicts. Some studies aim at analyzing the merges failures, however, there is a lack of tool support in the literature to measure the merge effort, jeopardizing such kind of analyses. In this article, we propose a technique and its companion tool for analyzing Git repositories and providing metrics related to the merge effort. We evaluated our tool over five projects, showing that rework and wasted work happens in, approximately, 10% to 30% of the projects. Moreover, the average of actions of these efforts is almost the same.
△ Less
Submitted 22 November, 2018;
originally announced November 2018.
-
APPROX -- Mutual approximations between the Galilean moons. The 2016-2018 observational campaign
Authors:
B. Morgado,
R. Vieira-Martins,
M. Assafin,
D. I. Machado,
J. I. B. Camargo,
R. Sfair,
M. Malacarne,
F. Braga-Ribas,
V. Robert,
T. Bassallo,
G. Benedetti-Rossi,
L. A. Boldrin,
G. Borderes-Motta,
B. C. B. Camargo,
A. Crispim,
A. Dias-Oliveira,
A. R. Gomes-Júnior,
V. Lainey,
J. O. Miranda,
T. S. Moura,
F. K. Ribeiro,
T. de Santana,
S. Santos-Filho,
L. L. Trabuco,
O. C. Winter
, et al. (1 additional authors not shown)
Abstract:
The technique of mutual approximations accurately gives the central instant at the maximum apparent approximation of two moving natural satellites in the sky plane. This can be used in ephemeris fitting to infer the relative positions between satellites with high precision. Only the mutual phenomena -- occultations and eclipses -- may achieve better results. However, mutual phenomena only occur ev…
▽ More
The technique of mutual approximations accurately gives the central instant at the maximum apparent approximation of two moving natural satellites in the sky plane. This can be used in ephemeris fitting to infer the relative positions between satellites with high precision. Only the mutual phenomena -- occultations and eclipses -- may achieve better results. However, mutual phenomena only occur every six years in the case of Jupiter. Mutual approximations do not have this restriction and can be observed at any time along the year as long as the satellites are visible. In this work, we present 104 central instants determined from the observations of 66 mutual approximations between the Galilean moons carried out at different sites in Brazil and France during the period 2016--2018. For 28 events we have at least two independent observations. All telescopes were equipped with a narrow-band filter centred at 889 nm with a width of 15 nm to eliminate the scattered light from Jupiter. The telescope apertures ranged between 25--120 cm. For comparison, the precision of the positions obtained with classical CCD astrometry is about 100 mas, for mutual phenomena it can achieve 10 mas or less and the average internal precision obtained with mutual approximations was 11.3 mas. This new kind of simple, yet accurate observations can significantly improve the orbits and ephemeris of Galilean satellites and thus be very useful for the planning of future space missions aiming at the Jovian system.
△ Less
Submitted 7 November, 2018;
originally announced November 2018.
-
Gradient Pattern Analysis Applied to Galaxy Morphology
Authors:
Reinaldo. R. Rosa,
Reinaldo. R. de Carvalho,
Rubens. A. Sautter,
Paulo. H. Barchi,
Diego. H. Stalder,
Tatiana. C. Moura,
Sandro. B. Rembold,
Dailer. R. F. Morell,
N. C. Ferreira
Abstract:
Gradient pattern analysis (GPA) is a well-established technique for measuring gradient bilateral asymmetries of a square numerical lattice. This paper introduces an improved version of GPA designed for galaxy morphometry. We show the performance of the new method on a selected sample of 54,896 objects from the SDSS-DR7 in common with Galaxy Zoo 1 catalog. The results suggest that the second gradie…
▽ More
Gradient pattern analysis (GPA) is a well-established technique for measuring gradient bilateral asymmetries of a square numerical lattice. This paper introduces an improved version of GPA designed for galaxy morphometry. We show the performance of the new method on a selected sample of 54,896 objects from the SDSS-DR7 in common with Galaxy Zoo 1 catalog. The results suggest that the second gradient moment, G2, has the potential to dramatically improve over more conventional morphometric parameters. It separates early from late type galaxies better (\sim 90\%) than the CAS system (C \sim 79\%, A \sim 50\%, S \sim 43\%) and a benchmark test shows that it is applicable to hundreds of thousands of galaxies using typical processing systems.
△ Less
Submitted 28 March, 2018;
originally announced March 2018.
-
Bayesian surface photometry analysis for early-type galaxies
Authors:
D. H. Stalder,
Reinaldo R. de Carvalho,
Martin D. Weinberg,
Sandro B. Rembold,
Tatiana C. Moura,
Reinaldo R. Rosa,
Neal Katz
Abstract:
We explore the application of Bayesian image analysis to infer the properties of an SDSS early-type galaxy sample including AGN. We use GALPHAT (Yoon et al. 2010) with a Bayes-factor model comparison to photometrically infer an AGN population and verify this using spectroscopic signatures. Our combined posterior sample for the SDSS sample reveals distinct low and high concentration modes after the…
▽ More
We explore the application of Bayesian image analysis to infer the properties of an SDSS early-type galaxy sample including AGN. We use GALPHAT (Yoon et al. 2010) with a Bayes-factor model comparison to photometrically infer an AGN population and verify this using spectroscopic signatures. Our combined posterior sample for the SDSS sample reveals distinct low and high concentration modes after the point-source flux is modeled. This suggests that ETG parameters are intrinsically bimodal. The bimodal signature was weak when analyzed by GALFIT (Peng et al. 2002, 2010). This led us to create several ensembles of synthetic images to investigate the bias of inferred structural parameters and compare with GALFIT. GALPHAT inferences are less biased, especially for high-concentration profiles: GALPHAT Sérsic index $n$, $r_{e}$ and MAG deviate from the true values by $6\%$, $7.6\%$ and $-0.03 \,\mathrm{mag}$, respectively, while GALFIT deviates by $15\%$, $22\%$ and $-0.09$\, mag, respectively. In addition, we explore the reliability for the photometric detection of AGN using Bayes factors. For our SDSS sample with $r_{e}\ge 7.92\,$arcsec, we correctly identify central point sources with $\mathrm{Mag_{PS}}-\mathrm{Mag_{Sersic}}\le 5$ for $n\le6$ and $\mathrm{Mag_{PS}}-\mathrm{Mag_{Sersic}}\le 3$ for $n>6$. The magnitude range increases and classification error decreases with increasing resolution, suggesting that this approach will excel for upcoming high-resolution surveys. Future work will extend this to models that test hypotheses of galaxy evolution through the cosmic time.
△ Less
Submitted 6 November, 2017;
originally announced November 2017.
-
Investigating the Relation between Galaxy Properties and the Gaussianity of the Velocity Distribution of Groups and Clusters
Authors:
R. R. de Carvalho,
A. L. B. Ribeiro,
D. Stalder,
R. R. Rosa,
A. P. Costa,
T. Moura
Abstract:
We investigate the dependence of stellar population properties of galaxies on group dynamical stage for a subsample of Yang catalog. We classify groups according to their galaxy velocity distribution into Gaussian (G) and Non-Gaussian (NG). Using two totally independent approaches we have shown that our measurement of Gaussianity is robust and reliable. Our sample covers Yang's groups in the redsh…
▽ More
We investigate the dependence of stellar population properties of galaxies on group dynamical stage for a subsample of Yang catalog. We classify groups according to their galaxy velocity distribution into Gaussian (G) and Non-Gaussian (NG). Using two totally independent approaches we have shown that our measurement of Gaussianity is robust and reliable. Our sample covers Yang's groups in the redshift range 0.03 $\leq$ z $\leq$ 0.1 having mass $\geq$ 10$^{14} \rm M_{\odot}$. The new method, Hellinger Distance (HD), to determine whether a group has a velocity distribution Gaussian or Non-Gaussian is very effective in distinguishing between the two families. NG groups present halo masses higher than the G ones, confirming previous findings. Examining the Skewness and Kurtosis of the velocity distribution of G and NG groups, we find that faint galaxies in NG groups are mainly infalling for the first time into the groups. We show that considering only faint galaxies in the outskirts, those in NG groups are older and more metal rich than the ones in G groups. Also, examining the Projected Phase Space of cluster galaxies we see that bright and faint galactic systems in G groups are in dynamical equilibrium which does not seem to be the case in NG groups. These findings suggest that NG systems have a higher infall rate, assembling more galaxies which experienced preprocessing before entering the group.
△ Less
Submitted 3 July, 2017;
originally announced July 2017.
-
Improving galaxy morphology with machine learning
Authors:
P. H. Barchi,
F. G. da Costa,
R. Sautter,
T. C. Moura,
D. H. Stalder,
R. R. Rosa,
R. R. de Carvalho
Abstract:
This paper presents machine learning experiments performed over results of galaxy classification into elliptical (E) and spiral (S) with morphological parameters: concetration (CN), assimetry metrics (A3), smoothness metrics (S3), entropy (H) and gradient pattern analysis parameter (GA). Except concentration, all parameters performed a image segmentation pre-processing. For supervision and to comp…
▽ More
This paper presents machine learning experiments performed over results of galaxy classification into elliptical (E) and spiral (S) with morphological parameters: concetration (CN), assimetry metrics (A3), smoothness metrics (S3), entropy (H) and gradient pattern analysis parameter (GA). Except concentration, all parameters performed a image segmentation pre-processing. For supervision and to compute confusion matrices, we used as true label the galaxy classification from GalaxyZoo. With a 48145 objects dataset after preprocessing (44760 galaxies labeled as S and 3385 as E), we performed experiments with Support Vector Machine (SVM) and Decision Tree (DT). Whit a 1962 objects balanced dataset, we applied K- means and Agglomerative Hierarchical Clustering. All experiments with supervision reached an Overall Accuracy OA >= 97%.
△ Less
Submitted 18 May, 2017;
originally announced May 2017.
-
Crowd Guilds: Worker-led Reputation and Feedback on Crowdsourcing Platforms
Authors:
Mark E. Whiting,
Dilrukshi Gamage,
Snehalkumar S. Gaikwad,
Aaron Gilbee,
Shirish Goyal,
Alipta Ballav,
Dinesh Majeti,
Nalin Chhibber,
Angela Richmond-Fuller,
Freddie Vargus,
Tejas Seshadri Sarma,
Varshine Chandrakanthan,
Teogenes Moura,
Mohamed Hashim Salih,
Gabriel Bayomi Tinoco Kalejaiye,
Adam Ginzberg,
Catherine A. Mullings,
Yoni Dayan,
Kristy Milland,
Henrique Orefice,
Jeff Regino,
Sayna Parsi,
Kunz Mainali,
Vibhor Sehgal,
Sekandar Matin
, et al. (3 additional authors not shown)
Abstract:
Crowd workers are distributed and decentralized. While decentralization is designed to utilize independent judgment to promote high-quality results, it paradoxically undercuts behaviors and institutions that are critical to high-quality work. Reputation is one central example: crowdsourcing systems depend on reputation scores from decentralized workers and requesters, but these scores are notoriou…
▽ More
Crowd workers are distributed and decentralized. While decentralization is designed to utilize independent judgment to promote high-quality results, it paradoxically undercuts behaviors and institutions that are critical to high-quality work. Reputation is one central example: crowdsourcing systems depend on reputation scores from decentralized workers and requesters, but these scores are notoriously inflated and uninformative. In this paper, we draw inspiration from historical worker guilds (e.g., in the silk trade) to design and implement crowd guilds: centralized groups of crowd workers who collectively certify each other's quality through double-blind peer assessment. A two-week field experiment compared crowd guilds to a traditional decentralized crowd work model. Crowd guilds produced reputation signals more strongly correlated with ground-truth worker quality than signals available on current crowd working platforms, and more accurate than in the traditional model.
△ Less
Submitted 28 February, 2017; v1 submitted 4 November, 2016;
originally announced November 2016.
