Showing 1–15 of 15 results for author: Mott, A

Performance of Commercial Quantum Annealing Solvers for the Capacitated Vehicle Routing Problem

Authors: Salvatore Sinno, Thomas Groß, Alan Mott, Arati Sahoo, Deepak Honnalli, Shruthi Thuravakkath, Bhavika Bhalgamiya

Abstract: Quantum annealing (QA) is a heuristic search algorithm that can run on Adiabatic Quantum Computation (AQC) processors to solve combinatorial optimization problems. Although theoretical studies and simulations on classic hardware have shown encouraging results, these analyses often assume that the computation occurs in adiabatically closed systems without environmental interference. This is not a r… ▽ More Quantum annealing (QA) is a heuristic search algorithm that can run on Adiabatic Quantum Computation (AQC) processors to solve combinatorial optimization problems. Although theoretical studies and simulations on classic hardware have shown encouraging results, these analyses often assume that the computation occurs in adiabatically closed systems without environmental interference. This is not a realistic assumption for real systems; therefore, without extensive empirical measurements on real quantum platforms, theory-based predictions, simulations on classical hardware or limited tests do not accurately assess the current commercial capabilities. This study has assessed the quality of the solution provided by a commercial quantum annealing platform compared to known solutions for the Capacitated Vehicle Routing Problem (CVRP). The study has conducted extensive analysis over more than 30 hours of access to QA commercial platforms to investigate how the size of the problem and its complexity impact the solution accuracy and the time used to find a solution. Our results have found that the absolute error is between 0.12 and 0.55, and the quantum processor unit (QPU) time is between 30 and 46 micro seconds. Our results show that as the constraint density increases, the quality of the solution degrades. Therefore, more than the problem size, the model complexity plays a critical role, and practical applications should select formulations that minimize the constraint density. △ Less

Submitted 11 September, 2023; originally announced September 2023.

The Effectiveness of Memory Replay in Large Scale Continual Learning

Authors: Yogesh Balaji, Mehrdad Farajtabar, Dong Yin, Alex Mott, Ang Li

Abstract: We study continual learning in the large scale setting where tasks in the input sequence are not limited to classification, and the outputs can be of high dimension. Among multiple state-of-the-art methods, we found vanilla experience replay (ER) still very competitive in terms of both performance and scalability, despite its simplicity. However, a degraded performance is observed for ER with smal… ▽ More We study continual learning in the large scale setting where tasks in the input sequence are not limited to classification, and the outputs can be of high dimension. Among multiple state-of-the-art methods, we found vanilla experience replay (ER) still very competitive in terms of both performance and scalability, despite its simplicity. However, a degraded performance is observed for ER with small memory. A further visualization of the feature space reveals that the intermediate representation undergoes a distributional drift. While existing methods usually replay only the input-output pairs, we hypothesize that their regularization effect is inadequate for complex deep models and diverse tasks with small replay buffer size. Following this observation, we propose to replay the activation of the intermediate layers in addition to the input-output pairs. Considering that saving raw activation maps can dramatically increase memory and compute cost, we propose the Compressed Activation Replay technique, where compressed representations of layer activation are saved to the replay buffer. We show that this approach can achieve superior regularization effect while adding negligible memory overhead to replay method. Experiments on both the large-scale Taskonomy benchmark with a diverse set of tasks and standard common datasets (Split-CIFAR and Split-miniImageNet) demonstrate the effectiveness of the proposed method. △ Less

Submitted 5 October, 2020; originally announced October 2020.

Comments: 15 pages

Optimization and Generalization of Regularization-Based Continual Learning: a Loss Approximation Viewpoint

Authors: Dong Yin, Mehrdad Farajtabar, Ang Li, Nir Levine, Alex Mott

Abstract: Neural networks have achieved remarkable success in many cognitive tasks. However, when they are trained sequentially on multiple tasks without access to old data, their performance on early tasks tend to drop significantly. This problem is often referred to as catastrophic forgetting, a key challenge in continual learning of neural networks. The regularization-based approach is one of the primary… ▽ More Neural networks have achieved remarkable success in many cognitive tasks. However, when they are trained sequentially on multiple tasks without access to old data, their performance on early tasks tend to drop significantly. This problem is often referred to as catastrophic forgetting, a key challenge in continual learning of neural networks. The regularization-based approach is one of the primary classes of methods to alleviate catastrophic forgetting. In this paper, we provide a novel viewpoint of regularization-based continual learning by formulating it as a second-order Taylor approximation of the loss function of each task. This viewpoint leads to a unified framework that can be instantiated to derive many existing algorithms such as Elastic Weight Consolidation and Kronecker factored Laplace approximation. Based on this viewpoint, we study the optimization aspects (i.e., convergence) as well as generalization properties (i.e., finite-sample guarantees) of regularization-based continual learning. Our theoretical results indicate the importance of accurate approximation of the Hessian matrix. The experimental results on several benchmarks provide empirical validation of our theoretical findings. △ Less

Submitted 8 February, 2021; v1 submitted 19 June, 2020; originally announced June 2020.

Comments: Preliminary version with a different title presented at ICML Workshop on Continual Learning, 2020 (spotlight)

Improving spectroscopic lithium abundances. Fitting functions for 3D non-LTE corrections in FGK stars of different metallicity

Authors: A. Mott, M. Steffen, E. Caffau, K. G. Strassmeier

Abstract: Accurate spectroscopic lithium abundances are essential in addressing a variety of open questions, such as the origin of a uniform lithium content in the atmospheres of metal-poor stars (Spite plateau) or the existence of a correlation between the properties of extra-solar planetary systems and the lithium abundance of their host stars. We have developed a tool that allows the user to improve the… ▽ More Accurate spectroscopic lithium abundances are essential in addressing a variety of open questions, such as the origin of a uniform lithium content in the atmospheres of metal-poor stars (Spite plateau) or the existence of a correlation between the properties of extra-solar planetary systems and the lithium abundance of their host stars. We have developed a tool that allows the user to improve the accuracy of standard lithium abundance determinations based on 1D model atmospheres and the assumption of Local Thermodynamic Equilibrium (LTE) by applying corrections that account for hydrodynamic (3D) and non-LTE (NLTE) effects in FGK stars of different metallicity. Based on a grid of CO5BOLD 3D models and associated 1D hydrostatic atmospheres, we computed three libraries of synthetic spectra of the lithium line at 670.8 nm for a wide range of lithium abundances, accounting for detailed line formation in 3D NLTE, 1D NLTE, and 1D LTE, respectively. The resulting curves-of-growth were then used to derive 3D NLTE and 1D NLTE lithium abundance corrections. We demonstrate that 3D and NLTE effects are small for metal-poor stars on the Spite plateau, leading to errors of at most +/-0.05 dex if ignored. The largest corrections are found at the coolest effective temperature, Teff=5000 K, where they can reach -0.4 dex for the strongest lines. We present analytical functions for evaluating the corrections and for directly converting a given lithium abundance into an equivalent width, or vice versa, a given equivalent width (EW) into a lithium abundance. For convenience, a Python script is made available that evaluates all fitting functions for given Teff, log g, [Fe/H], and A(Li) or EW. By means of the fitting functions, the results of complex 3D and NLTE calculations are made readily accessible and quickly applicable to large samples of stars across a wide range of metallicities. △ Less

Submitted 22 April, 2020; originally announced April 2020.

Comments: 28 pages 16 + 6 figures, accepted by Astronomy & Astrophysics

Journal ref: A&A 638, A58 (2020)

Towards Robust Image Classification Using Sequential Attention Models

Authors: Daniel Zoran, Mike Chrzanowski, Po-Sen Huang, Sven Gowal, Alex Mott, Pushmeet Kohl

Abstract: In this paper we propose to augment a modern neural-network architecture with an attention model inspired by human perception. Specifically, we adversarially train and analyze a neural model incorporating a human inspired, visual attention component that is guided by a recurrent top-down sequential process. Our experimental evaluation uncovers several notable findings about the robustness and beha… ▽ More In this paper we propose to augment a modern neural-network architecture with an attention model inspired by human perception. Specifically, we adversarially train and analyze a neural model incorporating a human inspired, visual attention component that is guided by a recurrent top-down sequential process. Our experimental evaluation uncovers several notable findings about the robustness and behavior of this new model. First, introducing attention to the model significantly improves adversarial robustness resulting in state-of-the-art ImageNet accuracies under a wide range of random targeted attack strengths. Second, we show that by varying the number of attention steps (glances/fixations) for which the model is unrolled, we are able to make its defense capabilities stronger, even in light of stronger attacks --- resulting in a "computational race" between the attacker and the defender. Finally, we show that some of the adversarial examples generated by attacking our model are quite different from conventional adversarial examples --- they contain global, salient and spatially coherent structures coming from the target class that would be recognizable even to a human, and work by distracting the attention of the model away from the main object in the original image. △ Less

Submitted 4 December, 2019; originally announced December 2019.

Orthogonal Gradient Descent for Continual Learning

Authors: Mehrdad Farajtabar, Navid Azizan, Alex Mott, Ang Li

Abstract: Neural networks are achieving state of the art and sometimes super-human performance on learning tasks across a variety of domains. Whenever these problems require learning in a continual or sequential manner, however, neural networks suffer from the problem of catastrophic forgetting; they forget how to solve previous tasks after being trained on a new task, despite having the essential capacity… ▽ More Neural networks are achieving state of the art and sometimes super-human performance on learning tasks across a variety of domains. Whenever these problems require learning in a continual or sequential manner, however, neural networks suffer from the problem of catastrophic forgetting; they forget how to solve previous tasks after being trained on a new task, despite having the essential capacity to solve both tasks if they were trained on both simultaneously. In this paper, we propose to address this issue from a parameter space perspective and study an approach to restrict the direction of the gradient updates to avoid forgetting previously-learned data. We present the Orthogonal Gradient Descent (OGD) method, which accomplishes this goal by projecting the gradients from new tasks onto a subspace in which the neural network output on previous task does not change and the projected gradient is still in a useful direction for learning the new task. Our approach utilizes the high capacity of a neural network more efficiently and does not require storing the previously learned data that might raise privacy concerns. Experiments on common benchmarks reveal the effectiveness of the proposed OGD method. △ Less

Submitted 15 October, 2019; originally announced October 2019.

Quantum adiabatic machine learning with zooming

Authors: Alexander Zlokapa, Alex Mott, Joshua Job, Jean-Roch Vlimant, Daniel Lidar, Maria Spiropulu

Abstract: Recent work has shown that quantum annealing for machine learning, referred to as QAML, can perform comparably to state-of-the-art machine learning methods with a specific application to Higgs boson classification. We propose QAML-Z, a novel algorithm that iteratively zooms in on a region of the energy surface by map** the problem to a continuous space and sequentially applying quantum annealing… ▽ More Recent work has shown that quantum annealing for machine learning, referred to as QAML, can perform comparably to state-of-the-art machine learning methods with a specific application to Higgs boson classification. We propose QAML-Z, a novel algorithm that iteratively zooms in on a region of the energy surface by map** the problem to a continuous space and sequentially applying quantum annealing to an augmented set of weak classifiers. Results on a programmable quantum annealer show that QAML-Z matches classical deep neural network performance at small training set sizes and reduces the performance margin between QAML and classical deep neural networks by almost 50% at large training set sizes, as measured by area under the ROC curve. The significant improvement of quantum annealing algorithms for machine learning and the use of a discrete quantum algorithm on a continuous optimization problem both opens a new class of problems that can be solved by quantum annealers and suggests the approach in performance of near-term quantum machine learning towards classical benchmarks. △ Less

Submitted 23 October, 2020; v1 submitted 13 August, 2019; originally announced August 2019.

Comments: 9 pages, 5 figures

Journal ref: Phys. Rev. A 102, 062405 (2020)

Towards Interpretable Reinforcement Learning Using Attention Augmented Agents

Authors: Alex Mott, Daniel Zoran, Mike Chrzanowski, Daan Wierstra, Danilo J. Rezende

Abstract: Inspired by recent work in attention models for image captioning and question answering, we present a soft attention model for the reinforcement learning domain. This model uses a soft, top-down attention mechanism to create a bottleneck in the agent, forcing it to focus on task-relevant information by sequentially querying its view of the environment. The output of the attention mechanism allows… ▽ More Inspired by recent work in attention models for image captioning and question answering, we present a soft attention model for the reinforcement learning domain. This model uses a soft, top-down attention mechanism to create a bottleneck in the agent, forcing it to focus on task-relevant information by sequentially querying its view of the environment. The output of the attention mechanism allows direct observation of the information used by the agent to select its actions, enabling easier interpretation of this model than of traditional models. We analyze different strategies that the agents learn and show that a handful of strategies arise repeatedly across different games. We also show that the model learns to query separately about space and content (`where' vs. `what'). We demonstrate that an agent using this mechanism can achieve performance competitive with state-of-the-art models on ATARI tasks while still being interpretable. △ Less

Submitted 6 June, 2019; originally announced June 2019.

3D non-LTE corrections for Li abundance and 6Li/7Li isotopic ratio in solar-type stars I. Application to HD 207129 and HD 95456

Authors: G. Harutyunyan, M. Steffen, A. Mott, E. Caffau, G. Israelian, J. I. González Hernández, K. G. Strassmeier

Abstract: Convective motions in solar-type stellar atmospheres induce Doppler shifts that affect the strengths and shapes of spectral absorption lines and create slightly asymmetric line profiles. 1D LTE studies of elemental abundances are not able to reproduce this phenomenon, which becomes particularly important when modeling the impact of isotopic fine structure, like the subtle depression created by the… ▽ More Convective motions in solar-type stellar atmospheres induce Doppler shifts that affect the strengths and shapes of spectral absorption lines and create slightly asymmetric line profiles. 1D LTE studies of elemental abundances are not able to reproduce this phenomenon, which becomes particularly important when modeling the impact of isotopic fine structure, like the subtle depression created by the 6Li isotope on the red wing of the Li I resonance doublet line. The purpose of this work is to provide corrections for the lithium abundance, A(Li), and the 6Li/7Li ratio that can easily be applied to correct 1D LTE lithium abundances in G and F dwarf stars of approximately solar mass and metallicity for 3D and non-LTE (NLTE) effects. The corrections for A(Li) and 6Li/7Li are computed using grids of 3D NLTE and 1D LTE synthetic lithium line profiles, generated from 3D hydro-dynamical CO5BOLD and 1D hydrostatic model atmospheres, respectively. The 3D NLTE corrections are then approximated by analytical expressions as a function of the stellar parameters. These are applied to adjust the 1D LTE isotopic lithium abundances in two solar-type stars, HD 207129 and HD 95456. The derived 3D NLTE corrections range between -0.01 and +0.11 dex for A(Li), and between -4.9 and -0.4% for the 6Li/7Li ratio, depending on the adopted stellar parameters. In the case of the 6Li/7Li ratio, our corrections are always negative, showing that 1D LTE analysis can significantly overestimate (up to 4.9 percentage points) the presence of 6Li in the atmospheres of solar-like dwarf stars. These results emphasize the importance of reliable 3D model atmospheres combined with NLTE line formation for deriving precise isotopic lithium abundances. Although 3D NLTE spectral synthesis implies an extensive computational effort, the results can be made accessible with parametric tools like the ones presented in this work. △ Less

Submitted 11 July, 2018; originally announced July 2018.

Comments: 22 pages, 14 figures, 9 tables, accepted for publication in A&A

Journal ref: A&A 618, A16 (2018)

Lithium abundance and 6Li/7Li ratio in the active giant HD123351 I. A comparative analysis of 3D and 1D NLTE line-profile fits

Authors: A. Mott, M. Steffen, E. Caffau, F. Spada, K. G. Strassmeier

Abstract: Current three-dimensional (3D) hydrodynamical model atmospheres together with NLTE spectrum synthesis, permit to derive reliable atomic and isotopic chemical abundances from high-resolution stellar spectra. Not much is known about the presence of the fragile 6Li isotope in evolved solar-metallicity RGB stars, not to mention its production in magnetically active targets like HD123351. From fits of… ▽ More Current three-dimensional (3D) hydrodynamical model atmospheres together with NLTE spectrum synthesis, permit to derive reliable atomic and isotopic chemical abundances from high-resolution stellar spectra. Not much is known about the presence of the fragile 6Li isotope in evolved solar-metallicity RGB stars, not to mention its production in magnetically active targets like HD123351. From fits of the observed CFHT spectrum with synthetic line profiles based on 1D and 3D model atmospheres, we seek to estimate the abundance of the 6Li isotope and to place constraints on its origin. We derive A(Li) and the 6Li/7Li isotopic ratio by fitting different synthetic spectra to the Li-line region of a high-resolution CFHT spectrum (R=120 000, S/R=400). The synthetic spectra are computed with four different line lists, using in parallel 3D hydrodynamical CO5BOLD and 1D LHD model atmospheres and treating the line formation of the lithium components in non-LTE (NLTE). We find A(Li)=1.69+/-0.11 dex and 6Li/7Li=8.0+/-4.4 % in 3D-NLTE, using the line list of Meléndez et al. (2012), updated with new atomic data for V I, which results in the best fit of the lithium line profile of HD123351. Two other line lists lead to similar results but with inferior fit qualities. Our 2-sigma detection of the 6Li isotope is the result of a careful statistical analysis and the visual inspection of each achieved fit. Since the presence of a significant amount of 6Li in the atmosphere of a cool evolved star is not expected in the framework of standard stellar evolution theory, non-standard, external lithium production mechanisms, possibly related to stellar activity or a recent accretion of rocky material, need to be invoked to explain the detection of 6Li in HD123351. △ Less

Submitted 21 April, 2017; originally announced April 2017.

Comments: 16 pages, 11 figures. Accepted for publication in A&A

Journal ref: A&A 604, A44 (2017)

The Gaia-ESO Survey: Galactic evolution of sulphur and zinc

Authors: S. Duffau, E. Caffau, L. Sbordone, P. Bonifacio, S. Andrievsky, S. Korotin, C. Babusiaux, S. Salvadori, L. Monaco, P. Francois, A. Skuladottir, A. Bragaglia, P. Donati, L. Spina, A. J. Gallagher, H. -G. Ludwig, N. Christlieb, C. J. Hansen, A. Mott, M. Steffen, S. Zaggia, S. Blanco-Cuaresma, F. Calura, E. Friel, F. M. Jimenez-Esteban , et al. (26 additional authors not shown)

Abstract: Due to their volatile nature, when sulfur and zinc are observed in external galaxies, their determined abundances represent the gas-phase abundances in the interstellar medium. This implies that they can be used as tracers of the chemical enrichment of matter in the Universe at high redshift. Comparable observations in stars are more difficult and, until recently, plagued by small number statistic… ▽ More Due to their volatile nature, when sulfur and zinc are observed in external galaxies, their determined abundances represent the gas-phase abundances in the interstellar medium. This implies that they can be used as tracers of the chemical enrichment of matter in the Universe at high redshift. Comparable observations in stars are more difficult and, until recently, plagued by small number statistics. We wish to exploit the Gaia ESO Survey (GES) data to study the behaviour of sulfur and zinc abundances of a large number of Galactic stars, in a homogeneous way. By using the UVES spectra of the GES sample, we are able to assemble a sample of 1301 Galactic stars, including stars in open and globular clusters in which both sulfur and zinc were measured. We confirm the results from the literature that sulfur behaves as an alpha-element. We find a large scatter in [Zn/Fe] ratios among giant stars around solar metallicity. The lower ratios are observed in giant stars at Galactocentric distances less than 7.5 kpc. No such effect is observed among dwarf stars, since they do not extend to that radius. Given the sample selection, giants and dwarfs are observed at different Galactic locations, and it is plausible, and compatible with simple calculations, that Zn-poor giants trace a younger population more polluted by SN Ia yields. It is necessary to extend observations in order to observe both giants and dwarfs at the same Galactic location. Further theoretical work on the evolution of zinc is also necessary. △ Less

Submitted 10 April, 2017; originally announced April 2017.

Comments: 15 pages, 17 figures, accepted for publication in A&A

Journal ref: A&A 604, A128 (2017)

RAVE stars in K2 - I. Improving RAVE red giants spectroscopy using asteroseismology from K2 Campaign 1

Authors: M. Valentini, C. Chiappini, G. R. Davies, Y. P. Elsworth, B. Mosser, M. N. Lund, A. Miglio, W. J. Chaplin, T. Rodrigues, C. Boeche, M. Steinmetz, G. Matijevic, G. Kordopatis, J. Bland-Hawthorn, U. Munari, O. Bienayme, B. K. Gibson, G. Gilmore, E. K. Grebel, A. Helmi, A. Kunder, P. McMillan, J. Navarro, Q. A. Parker, W. Reid , et al. (7 additional authors not shown)

Abstract: We present a set of 87 RAVE stars with detected solar like oscillations, observed during Campaign 1 of the K2 mission (RAVE K2-C1 sample). This dataset provides a useful benchmark for testing the gravities provided in RAVE Data Release 4 (DR4), and is key for the calibration of the RAVE Data Release 5 (DR5). In the present work, we use two different pipelines, GAUFRE (Valentini et al. 2013) and Sp… ▽ More We present a set of 87 RAVE stars with detected solar like oscillations, observed during Campaign 1 of the K2 mission (RAVE K2-C1 sample). This dataset provides a useful benchmark for testing the gravities provided in RAVE Data Release 4 (DR4), and is key for the calibration of the RAVE Data Release 5 (DR5). In the present work, we use two different pipelines, GAUFRE (Valentini et al. 2013) and Sp_Ace (Boeche & Grebel 2016), to determine atmospheric parameters and abundances by fixing log(g) to the seismic one. Our strategy ensures highly consistent values among all stellar parameters, leading to more accurate chemical abundances. A comparison of the chemical abundances obtained here with and without the use of seismic log(g) information has shown that an underestimated (overestimated) gravity leads to an underestimated (overestimated) elemental abundance (e.g. [Mg/H] is underestimated by ~0.25 dex when the gravity is underestimated by 0.5 dex). We then perform a comparison between the seismic gravities and the spectroscopic gravities presented in the RAVE DR4 catalogue, extracting a calibration for log(g) of RAVE giants in the colour interval 0.50<(J - Ks)<0.85. Finally, we show a comparison of the distances, temperatures, extinctions (and ages) derived here for our RAVE K2-C1 sample with those derived in RAVE DR4 and DR5.DR5 performs better than DR4 thanks to the seismic calibration, although discrepancies can still be important for objects for which the difference between DR4/DR5 and seismic gravities differ by more than ~0.5 dex. The method illustrated in this work will be used for analysing RAVE targets present in the other K2 campaigns, in the framework of Galactic Archaeology investigations. △ Less

Submitted 19 December, 2016; v1 submitted 13 September, 2016; originally announced September 2016.

Comments: 20 pages, 27 figures, accepted

Journal ref: A&A 600, A66 (2017)

Chemical composition of a sample of bright solar-metallicity stars

Authors: E. Caffau, A. Mott, M. Steffen, P. Bonifacio, K. G. Strassmeier, A. Gallagher, R. Faraggiana, L. Sbordone

Abstract: We present a detailed analysis of seven young stars observed with the spectrograph SOPHIE at the Observatoire de Haute-Provence for which the chemical composition was incomplete or absent in the literature. For five stars, we derived the stellar parameters and chemical compositions using our automatic pipeline optimized for F, G, and K stars, while for the other two stars with high rotational velo… ▽ More We present a detailed analysis of seven young stars observed with the spectrograph SOPHIE at the Observatoire de Haute-Provence for which the chemical composition was incomplete or absent in the literature. For five stars, we derived the stellar parameters and chemical compositions using our automatic pipeline optimized for F, G, and K stars, while for the other two stars with high rotational velocity, we derived the stellar parameters by using other information (parallax), and performed a line-by-line analysis. Chromospheric emission-line fluxes from CaII are obtained for all targets. The stellar parameters we derive are generally in good agreement with what is available in the literature. We provide a chemical analysis of two of the stars for the first time. The star HIP 80124 shows a strong Li feature at 670.8 nm implying a high lithium abundance. Its chemical pattern is not consistent with it being a solar sibling, as has been suggested. △ Less

Submitted 14 October, 2015; originally announced October 2015.

Comments: To be published on AN

Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data

Authors: The CMS, LHCb Collaborations, :, V. Khachatryan, A. M. Sirunyan, A. Tumasyan, W. Adam, T. Bergauer, M. Dragicevic, J. Erö, M. Friedl, R. Frühwirth, V. M. Ghete, C. Hartl, N. Hörmann, J. Hrubec, M. Jeitler, W. Kiesenhofer, V. Knünz, M. Krammer, I. Krätschmer, D. Liko, I. Mikulec, D. Rabady, B. Rahbaran , et al. (2807 additional authors not shown)

Abstract: A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta… ▽ More A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM. △ Less

Submitted 17 August, 2015; v1 submitted 17 November, 2014; originally announced November 2014.

Comments: Correspondence should be addressed to [email protected]

Report number: CERN-PH-EP-2014-220, CMS-BPH-13-007, LHCb-PAPER-2014-049

Journal ref: Nature 522, 68-72 (04 June 2015)

Abundance gradients in spiral disks: is the gradient inversion at high redshift real?

Authors: A. Mott, E. Spitoni, F. Matteucci

Abstract: We compute the abundance gradients along the disk of the Milky Way by means of the two-infall model: in particular, the gradients of oxygen and iron and their temporal evolution. First, we explore the effects of several physical processes which influence the formation and evolution of abundance gradients. They are: i) the inside-out formation of the disk, ii) a threshold in the gas density for sta… ▽ More We compute the abundance gradients along the disk of the Milky Way by means of the two-infall model: in particular, the gradients of oxygen and iron and their temporal evolution. First, we explore the effects of several physical processes which influence the formation and evolution of abundance gradients. They are: i) the inside-out formation of the disk, ii) a threshold in the gas density for star formation, iii) a variable star formation efficiency along the disk, iv) radial flows and their speed, and v) different total surface mass density (gas plus stars) distributions for the halo. We are able to reproduce at best the present day gradients of oxygen and iron if we assume an inside-out formation, no threshold gas density, a constant efficiency of star formation along the disk and radial gas flows. It is particularly important the choice of the velocity pattern for radial flows and the combination of this velocity pattern with the surface mass density distribution in the halo. Having selected the best model, we then explore the evolution of abundance gradients in time and find that the gradients in general steepen in time and that at redshift z~3 there is a gradient inversion in the inner regions of the disk, in the sense that at early epochs the oxygen abundance decreases toward the Galactic center. This effect, which has been observed, is naturally produced by our models if an inside-out formation of the disk and and a constant star formation efficiency are assumed. The inversion is due to the fact that in the inside-out formation a strong infall of primordial gas, contrasting chemical enrichment, is present in the innermost disk regions at early times. The gradient inversion remains also in the presence of radial flows, either with constant or variable speed in time, and this is a new result. △ Less

Submitted 7 August, 2013; originally announced August 2013.

Comments: 15 pages, 19 figures, accepted for publication in MNRAS