-
First Test Results of the Trans-Impedance Amplifier Stage of the Ultra-fast HPSoC ASIC
Authors:
C. Chock,
K. Flood,
L. Macchiarulo,
I. Mostafanezhad,
R. Perron,
D. Uehara,
F. Martinez-Mckinney,
A. Martinez- Rojas,
S. Mazza,
M. Nizam,
J. Ott,
E. Ryan,
H. F. -W. Sadrozinski,
B. Schumm,
A. Seiden,
K. Shin,
M. Tarka,
M. Wilder,
Y. Zhao
Abstract:
We present the first results from the HPSoC ASIC designed for readout of Ultra-fast Silicon Detectors. The 4-channel ASIC manufactured in 65 nm CMOS by TSMC has been optimized for 50 um thick AC-LGAD. The evaluation of the analog front end with \b{eta}-particles im**ing on 3x3 AC-LGAD arrays (500 um pitch, 200x200 um2 metal) confirms a fast output rise time of 600 ps and good timing performance…
▽ More
We present the first results from the HPSoC ASIC designed for readout of Ultra-fast Silicon Detectors. The 4-channel ASIC manufactured in 65 nm CMOS by TSMC has been optimized for 50 um thick AC-LGAD. The evaluation of the analog front end with \b{eta}-particles im**ing on 3x3 AC-LGAD arrays (500 um pitch, 200x200 um2 metal) confirms a fast output rise time of 600 ps and good timing performance with a jitter of 45 ps. Further calibration experiments and TCT laser studies indicate some gain limitations that are being investigated and are driving the design of the second-generation pre-amplification stages to reach a jitter of 15 ps.
△ Less
Submitted 10 December, 2022; v1 submitted 17 October, 2022;
originally announced October 2022.
-
CORE -- a COmpact detectoR for the EIC
Authors:
CORE Collaboration,
R. Alarcon,
M. Baker,
V. Baturin,
P. Brindza,
S. Bueltmann,
M. Bukhari,
R. Capobianco,
E. Christy,
S. Diehl,
M. Dugger,
R. Dupré,
R. Dzhygadlo,
K. Flood,
K. Gnanvo,
L. Guo,
T. Hayward,
M. Hattawy,
M. Hoballah,
M. Hohlmann,
C. E. Hyde,
Y. Ilieva,
W. W. Jacobs,
K. Joo,
G. Kalicy
, et al. (34 additional authors not shown)
Abstract:
The COmpact detectoR for the Eic (CORE) Proposal was submitted to the EIC "Call for Collaboration Proposals for Detectors". CORE comprehensively covers the physics scope of the EIC Community White Paper and the National Academies of Science 2018 report. The design exploits advances in detector precision and granularity to minimize size. The central detector includes a 3Tesla, 2.5m solenoid. Tracki…
▽ More
The COmpact detectoR for the Eic (CORE) Proposal was submitted to the EIC "Call for Collaboration Proposals for Detectors". CORE comprehensively covers the physics scope of the EIC Community White Paper and the National Academies of Science 2018 report. The design exploits advances in detector precision and granularity to minimize size. The central detector includes a 3Tesla, 2.5m solenoid. Tracking is primarily silicon. Electromagnetic calorimetry is based on the high performance crystals. Ring-imaging Cherenkov detectors provide hadronic particle identification.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Novel Muon Tomography Detector for the Pyramids
Authors:
Richard T. Kouzes,
Alain Bonneville,
Azaree Lintereur,
Isar Mostafanezhad,
Ryan Pang,
Ben Rotter,
Farjana Snigdha,
Michael Tytgat,
Shereen Aly,
Basma ElMahdy,
Yasser Assran,
Ayman Mahrous
Abstract:
Cosmic-ray muons which im**e upon the Earth's surface can be used to image the density of geological and man-made materials located above a muon detector. The detectors used for these measurements must be capable of determining the muon rate as a function of the angle of incidence. Applications of this capability include geological carbon storage, natural gas storage, enhanced oil recovery, comp…
▽ More
Cosmic-ray muons which im**e upon the Earth's surface can be used to image the density of geological and man-made materials located above a muon detector. The detectors used for these measurements must be capable of determining the muon rate as a function of the angle of incidence. Applications of this capability include geological carbon storage, natural gas storage, enhanced oil recovery, compressed air storage, oil and gas production, tunnel detection, and detection of hidden rooms in man-made structures such as the pyramids. For these applications the detector must be small, rugged, and have operational characteristics which enable its use in remote locations, such as low power requirements. A new muon detector design is now being constructed to make measurements on the Khafre pyramid, in Egypt, to look for unknown voids that might exist in the structure. The new detector design uses monolithic plates of scintillator with wavelength shifting fiber optic readout to obtain location information. This design will meet the operational requirements, while also providing a geometry which can be modified for different measurement conditions.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Simulation Studies of a Novel Muography Detector for the Great Pyramids
Authors:
S. Aly,
Y. Assran,
A. Bonneville,
B. ElMahdy,
R. T. Kouzes,
A. Lintereur,
A. Mahrous,
I. Mostafanezhad,
R. Pang,
B. Rotter,
F. Snigdha,
M. Tytgat,
M. N. Yaseen
Abstract:
Muography is an imaging technique that can be used to examine the interior structure of large-size objects. The technique is based on measurements of the absorption of cosmic-ray muons passing through the object under study. Muographic imaging was already successfully applied to the discovery of a new void inside the Great Pyramid of Khufu at Giza, Egypt. With the aim of studying the Pyramid of Kh…
▽ More
Muography is an imaging technique that can be used to examine the interior structure of large-size objects. The technique is based on measurements of the absorption of cosmic-ray muons passing through the object under study. Muographic imaging was already successfully applied to the discovery of a new void inside the Great Pyramid of Khufu at Giza, Egypt. With the aim of studying the Pyramid of Khafre, the second largest pyramid at Giza, a new muography detector is currently being constructed. In this paper we report on the development of a corresponding new simulation framework of the Great Pyramids and the detector setup. This simulation will serve as a basis to develop the data and image reconstruction algorithms to be used during our future muography campaign in the Pyramid of Khafre, and will allow us to study the relevant experimental conditions at the site.
△ Less
Submitted 16 February, 2022; v1 submitted 15 February, 2022;
originally announced February 2022.
-
Performance of the Unified Readout System of Belle II
Authors:
Mikihiko Nakao,
Ryosuke Itoh,
Satoru Yamada,
Soh Y. Suzuki,
Tomoyuki Konno,
Qi-Dong Zhou,
Takuto Kunigo,
Ryohei Sugiura,
Seokhee Park,
Zhen-An Liu,
**gzhou Zhao,
Igor Konorov,
Dmytro Levit,
Katsuro Nakamura,
Hikaru Tanigawa,
Nanae Taniguchi,
Tomohisa Uchida,
Kurtis Nishimura,
Oskar Hartbrich,
Yun-Tsung Lai,
Masayoshi Shoji,
Alexander Kuzmin,
Vladimir Zhulanov,
Brandon Kunkler,
Isar Mostafanezhad
, et al. (2 additional authors not shown)
Abstract:
The Belle II experiment at the SuperKEKB collider at KEK, Tsukuba, Japan has successfully started taking data with the full detector in March 2019. Belle II is a luminosity frontier experiment of the new generation to search for physics beyond the Standard Model of elementary particles, from precision measurements of a huge number of B and charm mesons and tau leptons. In order to read out the eve…
▽ More
The Belle II experiment at the SuperKEKB collider at KEK, Tsukuba, Japan has successfully started taking data with the full detector in March 2019. Belle II is a luminosity frontier experiment of the new generation to search for physics beyond the Standard Model of elementary particles, from precision measurements of a huge number of B and charm mesons and tau leptons. In order to read out the events at a high rate from the seven subdetectors of Belle II, we adopt a highly unified readout system, including a unified trigger timing distribution system (TTD), a unified high speed data link system (Belle2link), and a common backend system to receive Belle2link data. Each subdetector frontend readout system has a field-programmable gate array (FPGA) in which unified firmware components of the TTD receiver and Belle2link transmitter are embedded. The system is designed for data taking at a trigger rate up to 30 kHz with a dead-time fraction of about 1% in the frontend readout system. The trigger rate is still much lower than our design. However, the background level is already high due to the initial vacuum condition and other accelerator parameters, and it is the most limiting factor of the accelerator and detector operation. Hence the occupancy and radiation effects to the frontend electronics are rather severe, and they cause various kind of instabilities. We present the performance of the system, including the achieved trigger rate, dead-time fraction, stability, and discuss the experience gained during the operation.
△ Less
Submitted 26 May, 2021; v1 submitted 29 October, 2020;
originally announced October 2020.
-
Teaching Charge Coupled Devices Using Models as Part of the Engineering Design Process at Maui Community College
Authors:
Isar Mostafanezhad,
Johnny Tam,
Ciril Rozic,
David Harrington,
Brad Jacobs,
Ryan Swindle,
Elisabeth Reader
Abstract:
The CCD Modeling Activity was designed to supplement the curriculum of the Electrical and Computing Engineering Technology program at the Maui Community College. The activity was designed to help learners understand how a Charge Coupled Device (CCD) works. A team of visiting graduate students was invited to teach an activity through the Teaching and Curriculum Collaborative (TeCC) as part of the C…
▽ More
The CCD Modeling Activity was designed to supplement the curriculum of the Electrical and Computing Engineering Technology program at the Maui Community College. The activity was designed to help learners understand how a Charge Coupled Device (CCD) works. A team of visiting graduate students was invited to teach an activity through the Teaching and Curriculum Collaborative (TeCC) as part of the Center for Adaptive Optics/Institute for Science and Engineer Educators Professional Development Program. One of the primary goals was to have students gain an understanding of the function of a CCD by constructing a model representing the CCD readout process. In this paper we discuss the design and implementation of the activity and the challenges we faced.
△ Less
Submitted 22 September, 2010;
originally announced September 2010.
-
The Design and Implementation of the Akamai Maui Short Course
Authors:
Ryan Montgomery,
David Harrington,
Sarah Sonnett,
Mark Pitts,
Isar Mostafanezhad,
Mike Foley,
Eddie Laag,
Lisa Hunter
Abstract:
We describe the design and elements of implementation of the Akamai Maui Short Course (AMSC). The AMSC contains four full inquiry activities each of which builds on those previous: Camera Obscura and Sun Shadows, Lenses and Refraction, Color and Light, and the Adaptive Optics Demonstrator. In addition we describe the workings of two additional strands: 1) Communication, and 2) Science, Technology…
▽ More
We describe the design and elements of implementation of the Akamai Maui Short Course (AMSC). The AMSC contains four full inquiry activities each of which builds on those previous: Camera Obscura and Sun Shadows, Lenses and Refraction, Color and Light, and the Adaptive Optics Demonstrator. In addition we describe the workings of two additional strands: 1) Communication, and 2) Science, Technology and Society. We also discuss our assessment methods and our results.
△ Less
Submitted 22 September, 2010;
originally announced September 2010.
