-
Measuring the Noise Cumulative Distribution Function Using Quantized Data
Authors:
Paolo Carbone,
Johan Schoukens,
István Kollár,
Antonio Moschitta
Abstract:
This paper considers the problem of estimating the cumulative distribution function and probability density function of a random variable using data quantized by uniform and non-uniform quantizers. A simple estimator is proposed based on the empirical distribution function that also takes the values of the quantizer transition levels into account. The properties of this estimator are discussed and…
▽ More
This paper considers the problem of estimating the cumulative distribution function and probability density function of a random variable using data quantized by uniform and non-uniform quantizers. A simple estimator is proposed based on the empirical distribution function that also takes the values of the quantizer transition levels into account. The properties of this estimator are discussed and analyzed at first by simulations. Then by removing all assumptions that are difficult to apply, a new procedure is described that does not require neither the transition levels nor the input sequence used to source the quantizer to be known. The experimental results obtained using a commercial 12-b data acquisition system show the applicability of this estimator to real-world type of problems.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
Accurate Sine-Wave Amplitude Measurements Using Nonlinearly Quantized Data
Authors:
Paolo Carbone,
Johan Schoukens,
István Kollár,
Antonio Moschitta
Abstract:
The estimation of the amplitude of a sine wave from the sequence of its quantized samples is a typical problem in instrumentation and measurement. A standard approach for its solution makes use of a least squares estimator (LSE) that, however, does not perform optimally in the presence of quantization errors. In fact, if the quantization error cannot be modeled as an additive noise source, as it o…
▽ More
The estimation of the amplitude of a sine wave from the sequence of its quantized samples is a typical problem in instrumentation and measurement. A standard approach for its solution makes use of a least squares estimator (LSE) that, however, does not perform optimally in the presence of quantization errors. In fact, if the quantization error cannot be modeled as an additive noise source, as it often happens in practice, the LSE returns biased estimates. In this paper, we consider the estimation of the amplitude of a noisy sine wave after quantization. The proposed technique is based on a uniform distribution of signal phases and it does not require that the quantizer has equally spaced transition levels. The experimental results show that this technique removes the estimation bias associated with the usage of the LSE and that it is sufficiently robust with respect to small uncertainties in the known values of transition levels.
△ Less
Submitted 27 April, 2018;
originally announced April 2018.
-
Information and Statistical Efficiency When Quantizing Noisy DC Values
Authors:
Antonio Moschitta,
Johan Schoukens,
Paolo Carbone
Abstract:
This paper considers estimation of a quantized constant in noise when using uniform and nonuniform quantizers. Estimators based on simple arithmetic averages, on sample statistical moments and on the maximum-likelihood procedure are considered. It provides expressions for the statistical efficiency of the arithmetic mean by comparing its variance to the proper Cramér-Rao lower bound. It is conject…
▽ More
This paper considers estimation of a quantized constant in noise when using uniform and nonuniform quantizers. Estimators based on simple arithmetic averages, on sample statistical moments and on the maximum-likelihood procedure are considered. It provides expressions for the statistical efficiency of the arithmetic mean by comparing its variance to the proper Cramér-Rao lower bound. It is conjectured that the arithmetic mean is optimal among all estimators with an exactly known bias. Conditions under which its statistical performance are improved by the other estimation procedures when the exact bias is not known are found and analyzed. Using simulations and analysis of experimental data, it is shown that both moment-based and maximum-likelihood-based estimators provide better results, when the noise standard deviation is comparable with the quantization step and the noise model of quantization can not be applied.
△ Less
Submitted 27 April, 2018;
originally announced April 2018.
-
Dynamic Signal Measurements Based on Quantized Data
Authors:
Paolo Carbone,
Johan Schuokens,
Antonio Moschitta
Abstract:
The estimation of the parameters of a dynamic signal, such as a sine wave, based on quantized data is customarily performed using the least-square estimator (LSE), such as the sine fit. However, the characteristics of the experiments and the measurement setup hardly satisfy the requirements ensuring the LSE to be optimal in the minimum mean-square-error sense. This occurs if the input signal is ch…
▽ More
The estimation of the parameters of a dynamic signal, such as a sine wave, based on quantized data is customarily performed using the least-square estimator (LSE), such as the sine fit. However, the characteristics of the experiments and the measurement setup hardly satisfy the requirements ensuring the LSE to be optimal in the minimum mean-square-error sense. This occurs if the input signal is characterized by a large signal-to-noise ratio resulting in the deterministic component of the quantization error dominating the random error component and when the ADC transition levels are not uniformly distributed over the quantizer input range. In this paper, it is first shown that the LSE applied to quantized data does not perform as expected when the quantizer is not uniform. Then, an estimator is introduced that overcomes these limitations. It uses the values of the transition levels so that a prior quantizer calibration phase is necessary. The estimator properties are analyzed and both numerical and experimental results are described to illustrate its performance. It is shown that the described estimator outperforms the LSE and it also provides an estimate of the probability distribution function of the noise before quantization.
△ Less
Submitted 26 April, 2018;
originally announced April 2018.
-
Parametric System Identification Using Quantized Data
Authors:
Antonio Moschitta,
Johan Schoukens,
Paolo Carbone
Abstract:
The estimation of signal parameters using quantized data is a recurrent problem in electrical engineering. As an example, this includes the estimation of a noisy constant value and of the parameters of a sinewave, that is, its amplitude, initial record phase, and offset. Conventional algorithms, such as the arithmetic mean, in the case of the estimation of a constant, are known not to be optimal i…
▽ More
The estimation of signal parameters using quantized data is a recurrent problem in electrical engineering. As an example, this includes the estimation of a noisy constant value and of the parameters of a sinewave, that is, its amplitude, initial record phase, and offset. Conventional algorithms, such as the arithmetic mean, in the case of the estimation of a constant, are known not to be optimal in the presence of quantization errors. They provide biased estimates if particular conditions regarding the quantization process are not met, as it usually happens in practice. In this paper, a quantile-based estimator is presented, which is based on the Gauss-Markov theorem. The general theory is first described and the estimator is then applied to both direct current and alternate current input signals with unknown characteristics. Using simulations and experimental results, it is shown that the new estimator outperforms conventional estimators in both problems, by removing the estimation bias.
△ Less
Submitted 26 April, 2018;
originally announced April 2018.
-
Accurate Estimation of a Coil Magnetic Dipole Moment
Authors:
Antonio Moschitta,
Alessio De Angelis,
Francesco Santoni,
Marco Dionigi,
Paolo Carbone,
Guido De Angelis
Abstract:
In this paper, a technique for accurate estimation of the moment of magnetic dipole is proposed. The achievable accuracy is investigated, as a function of measurement noise affecting estimation of magnetic field cartesian components. The proposed technique is validated both via simulations and experimentally.
In this paper, a technique for accurate estimation of the moment of magnetic dipole is proposed. The achievable accuracy is investigated, as a function of measurement noise affecting estimation of magnetic field cartesian components. The proposed technique is validated both via simulations and experimentally.
△ Less
Submitted 19 October, 2017;
originally announced October 2017.
-
TDoA Based Positioning using Ultrasound Signals and Wireless Nodes
Authors:
Alessio De Angelis,
Antonio Moschitta,
Antonella Comuniello
Abstract:
In this paper, a positioning technique based on Time Difference of Arrival (TDoA) measurements is analyzed. The proposed approach is designed to consent range and position estimation, using ultrasound transmissions of a stream of chirp pulses, received by a set of wireless nodes. A potential source of inaccuracy introduced by lack of synchronization between transmitting node and receiving nodes is…
▽ More
In this paper, a positioning technique based on Time Difference of Arrival (TDoA) measurements is analyzed. The proposed approach is designed to consent range and position estimation, using ultrasound transmissions of a stream of chirp pulses, received by a set of wireless nodes. A potential source of inaccuracy introduced by lack of synchronization between transmitting node and receiving nodes is identified and characterized. An algorithm to identify and correct such inaccuracies is presented.
△ Less
Submitted 19 October, 2017;
originally announced October 2017.
-
Analysis of simultaneous 3D positioning and attitude estimation of a planar coil using inductive coupling
Authors:
Antonio Moschitta,
Alessio De Angelis,
Marco Dionigi,
Paolo Carbone
Abstract:
In this paper, simultaneous estimation of 3D position and attitude of a single coil using a set of anchors, with known position and magnetic dipole, is analyzed. Effect of noise and geometric properties of the anchors' constellation is considered. Several parameters are analyzed and discussed, including placement of anchors in a single or in multiple orthogonal planes. It is shown that adding spac…
▽ More
In this paper, simultaneous estimation of 3D position and attitude of a single coil using a set of anchors, with known position and magnetic dipole, is analyzed. Effect of noise and geometric properties of the anchors' constellation is considered. Several parameters are analyzed and discussed, including placement of anchors in a single or in multiple orthogonal planes. It is shown that adding space and orientation diversity anchors may lead to a more robust performance when the mobile node attitude changes in time.
△ Less
Submitted 5 October, 2017;
originally announced October 2017.