-
Gettering in polySi/SiOx passivating contacts enables Si-based tandem solar cells with high thermal and contamination resilience
Authors:
Alireza Assar,
Filipe Martinho,
Jes Larsen,
Nishant Saini,
Denver Shearer,
Marcos V. Moro,
Fredrik Stulen,
Sigbjørn Grini,
Sara Engberg,
Eugen Stamate,
Jørgen Schou,
Lasse Vines,
Stela Canulescu,
Charlotte Platzer-Björkman,
Ole Hansen
Abstract:
Multijunction solar cells in a tandem configuration could further lower the costs of electricity if crystalline Si (c-Si) is used as bottom cell. However, for direct monolithic integration on c-Si, only a restricted number of top and bottom cell architectures are compatible, due to either epitaxy or high temperature constraints, where the interface between subcells is subject to a trade-off betwee…
▽ More
Multijunction solar cells in a tandem configuration could further lower the costs of electricity if crystalline Si (c-Si) is used as bottom cell. However, for direct monolithic integration on c-Si, only a restricted number of top and bottom cell architectures are compatible, due to either epitaxy or high temperature constraints, where the interface between subcells is subject to a trade-off between transmittance, electrical interconnection, and bottom cell degradation. Using polySi/SiOx passivating contacts for Si, this degradation can be largely circumvented by tuning the polySi/SiOx stacks to promote gettering of contaminants admitted into the Si bottom cell during the top cell synthesis. Applying this concept to the low-cost top cell chalcogenides Cu2ZnSnS4 (CZTS), CuGaSe2 (CGSe) and AgInGaSe2 (AIGSe), fabricated under harsh S or Se atmospheres above 550 °C, we show that increasing the heavily-doped polySi layer thickness from 40 to up to 400 nm prevents a reduction in Si carrier lifetime by one order of magnitude, with final lifetimes above 500 us uniformly across areas up to 20 cm2. In all cases, the increased resilience was correlated with a 99.9% reduction in contaminant concentration in the c-Si bulk, provided by the thick polySi layer, which acts as a buried gettering layer in the tandem structure without compromising the Si passivation quality. The Si resilience decreased as AIGSe > CGSe > CZTS, in accordance with the measured Cu contamination profiles and higher annealing temperatures. An efficiency of up to 7% was achieved for a CZTS/Si tandem, where the Si bottom cell is no longer the limiting factor.
△ Less
Submitted 4 November, 2021;
originally announced November 2021.
-
Experimental electronic stop** cross section of tungsten for light ions in a large energy interval
Authors:
M. V. Moro,
P. M. Wolf,
B. Bruckner,
F. Munnik,
R. Heller,
P. Bauer,
D. Primetzhofer
Abstract:
Electronic stop** cross section of tungsten for light ions was experimentally measured in a wide energy interval (20 to 6000 keV for protons and 50 to 9000 keV for helium) in backscattering and transmission geometries. The measurements were carried out in three laboratories (Austria, Germany and Sweden) using five different set-ups, the stop** data deduced from different data sets showed excel…
▽ More
Electronic stop** cross section of tungsten for light ions was experimentally measured in a wide energy interval (20 to 6000 keV for protons and 50 to 9000 keV for helium) in backscattering and transmission geometries. The measurements were carried out in three laboratories (Austria, Germany and Sweden) using five different set-ups, the stop** data deduced from different data sets showed excellent agreement amongst each other, with total uncertainty varying within 1.5 - 3.8\% for protons and 2.2 - 5.5\% for helium, averaged over the respective energy range of each data set. The final data is compared to available data and to widely adopted semi-empirical and theoretical approaches, and found to be in good agreement with most adopted models at energies around and above the stop** maximum. Most importantly, our results extend the energy regime towards lower energies, and are thus of high technological relevance, e.g., in fusion research. At these low energies, our findings also revealed that tungsten - featured with fully and partially occupied f- and d-subshells, respectively, can be modeled as an electron gas for the energy loss process.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Photochromic response of encapsulated oxygen-containing yttrium hydride thin films
Authors:
Marcos V. Moro,
Sigurbjörn M. Aðalsteinsson,
Tuan. T. Tran,
Dmitrii Moldarev,
Ayan Samanta,
Max Wolff,
Daniel Primetzhofer
Abstract:
Photochromic oxygen$-$containing yttrium$-$hydride thin films are synthesized by argon$-$magnetron sputtering on microscope slides. Some of them are encapsulated with a thin, transparent and non$-$photochromic diffusion-barrier layer of either Al2O3 or Si3N4. Ion beam-based methods prove that these protective diffusion barriers are stable and free from pinholes, with thicknesses of only a few tens…
▽ More
Photochromic oxygen$-$containing yttrium$-$hydride thin films are synthesized by argon$-$magnetron sputtering on microscope slides. Some of them are encapsulated with a thin, transparent and non$-$photochromic diffusion-barrier layer of either Al2O3 or Si3N4. Ion beam-based methods prove that these protective diffusion barriers are stable and free from pinholes, with thicknesses of only a few tens of nanometers. Optical spectrophotometry reveals that the photochromic response and relaxation time for both $-$ protected and unprotected $-$ samples are almost identical. Ageing effects in the unprotected films lead to degradation of the photochromic performance (self$-$delamination) while the photochromic response for the encapsulated films is stable. Our results show that the environment does not play a decisive role for the photochromic process and encapsulation of oxygen containing rare-earth hydride films with transparent and non-organic thin diffusion barrier layers provides long-time stability of the films, mandatory for applications as photochromic coatings on e.g., smart windows.
△ Less
Submitted 30 December, 2020;
originally announced December 2020.
-
Correlating chemical composition and optical properties of photochromic rare-earth oxy-hydrides using ion beam analysis
Authors:
S. M. Aðalsteinsson,
M. V. Moro,
D. Moldarev,
S. Droulias,
M. Wolff,
D. Primetzhofer
Abstract:
We relate the photochromic response of rare-earth oxy-hydride thin films (YHO, NdHO, GdHO and DyHO) synthesized by reactive magnetron sputtering to chemical composition. Depth profiles of the sample composition are extracted by a multi-method ion beam analysis approach. The total areal density of the thin films is deduced from Rutherford Backscattering Spectrometry while coincidence Time-of-Flight…
▽ More
We relate the photochromic response of rare-earth oxy-hydride thin films (YHO, NdHO, GdHO and DyHO) synthesized by reactive magnetron sputtering to chemical composition. Depth profiles of the sample composition are extracted by a multi-method ion beam analysis approach. The total areal density of the thin films is deduced from Rutherford Backscattering Spectrometry while coincidence Time-of-Flight/Energy Elastic Recoil Detection Analysis provides depth-profiles of the film constituents. High-resolution depth profiles of the concentration of light species, i.e. hydrogen and oxygen, are additionally extracted from Nuclear Reaction Analysis and Elastic Backscattering Spectrometry, respectively. The photochromic response of the films is measured by optical transmission spectroscopy before and after illumination. We report photochromic properties for YHO, NdHO, GdHO and DyHO for chemical compositions described by the formula $REH_{2-δ}O_δ$ in the range of $0.45 {<} δ {<} 1.5$.
△ Less
Submitted 15 April, 2020;
originally announced April 2020.
-
Synthesis and $\textit{in-situ}$ characterization of photochromic yttrium oxyhydride grown by reactive $e^-$-beam evaporation
Authors:
K. Kantre,
M. V. Moro,
D. Moldarev,
M. Wolff,
D. Primetzhofer
Abstract:
We report on controlled growth of photochromic yttrium oxyhydride thin films monitored by $\textit{in-situ}$ composition depth profiling. Films were grown by reactive $e^-$-beam evaporation and subsequently oxidized, while simultaneously tracking the oxygen and hydrogen concentrations. Sample composition and photochromic response were characterized $\textit{in-situ}$ using non destructive ion beam…
▽ More
We report on controlled growth of photochromic yttrium oxyhydride thin films monitored by $\textit{in-situ}$ composition depth profiling. Films were grown by reactive $e^-$-beam evaporation and subsequently oxidized, while simultaneously tracking the oxygen and hydrogen concentrations. Sample composition and photochromic response were characterized $\textit{in-situ}$ using non destructive ion beam analysis and image analysis, respectively - as well as complementary $\textit{ex-situ}$ ion beam methods, X-ray diffraction and optical spectrophotometry. We show that photochromic yttrium oxyhydride can be grown as yttrium dihydride, which is then oxidized to O/H ratios triggering the photochromic response.
△ Less
Submitted 9 June, 2020; v1 submitted 2 April, 2020;
originally announced April 2020.
-
Magnetic and all-optical switching properties of amorphous Tb$_x$Co$_{100-x}$ alloys
Authors:
Agne Ciuciulkaite,
Kshiti Mishra,
Marcos V. Moro,
Ioan-Augustin Chioar,
Richard M. Rowan-Robinson,
Sergii Parchenko,
Armin Kleibert,
Bengt Lindgren,
Gabriella Andersson,
Carl Davies,
Alexey Kimel,
Marco Berritta,
Peter M. Oppeneer,
Andrei Kirilyuk,
Vassilios Kapaklis
Abstract:
Amorphous Tb$_{x}$Co$_{100-x}$ magnetic alloys exhibit a list of intriguing properties, such as perpendicular magnetic anisotropy, high magneto-optical activity and magnetization switching using ultrashort optical pulses. Varying the Tb:Co ratio in these alloys allows for tuning properties such as the saturation magnetic moment, coercive field and the performance of the light-induced magnetization…
▽ More
Amorphous Tb$_{x}$Co$_{100-x}$ magnetic alloys exhibit a list of intriguing properties, such as perpendicular magnetic anisotropy, high magneto-optical activity and magnetization switching using ultrashort optical pulses. Varying the Tb:Co ratio in these alloys allows for tuning properties such as the saturation magnetic moment, coercive field and the performance of the light-induced magnetization switching. In this work, we investigate the magnetic, optical and magneto-optical properties of various Tb$_{x}$Co$_{100-x}$ thin film alloy compositions. We report on the effect the choice of different seeding layers has on the structural and magnetic properties of Tb$_{x}$Co$_{100-x}$ layers. We also demonstrate that for a range of alloys, deposited on fused silica substrates, with Tb content of 24-30 at.$\%$, helicity dependent all-optical switching of magnetization can be achieved, albeit in a multi-shot framework. We explain this property to arise from the helicity-dependent laser induced magnetization on the Co sublattice due to the inverse Faraday effect. Our study provides an insight into material aspects for future potential hybrid magneto-plasmonic TbCo-based architectures.
△ Less
Submitted 2 October, 2020; v1 submitted 18 February, 2020;
originally announced February 2020.
-
Influence of structure and cation distribution on magnetic anisotropy and dam** in Zn/Al doped nickel ferrites
Authors:
Julia Lumetzberger,
Martin Buchner,
Santa Pile,
Verena Ney,
Wolfgang Gaderbauer,
Niéli Daffé,
Marcos V. Moro,
Daniel Primetzhofer,
Kilian Lenz,
Andreas Ney
Abstract:
An in-depth analysis of Zn/Al doped nickel ferrites grown by reactive magnetron sputtering is relevant due to their promising characteristics for applications in spintronics. The material is insulating and ferromagnetic at room temperature with an additional low magnetic dam**. By studying the complex interplay between strain and cation distribution their impact on the magnetic properties, i.e.…
▽ More
An in-depth analysis of Zn/Al doped nickel ferrites grown by reactive magnetron sputtering is relevant due to their promising characteristics for applications in spintronics. The material is insulating and ferromagnetic at room temperature with an additional low magnetic dam**. By studying the complex interplay between strain and cation distribution their impact on the magnetic properties, i.e. anisotropy, dam** and g-factor is unravelled. In particular, a strong influence of the lattice site occupation of Ni$^{2+}_{\text{Td}}$ and cation coordination of Fe$^{2+}_{\text{Oh}}$ on the intrinsic dam** is found. Furthermore, the critical role of the incorporation of Zn$^{2+}$ and Al$^{3+}$ is evidenced by comparison with a sample of altered composition. Especially, the dopant Zn$^{2+}$ is evidenced as a tuning factor for Ni$^{2+}_{\text{Td}}$ and therefore unquenched orbital moments directly controlling the g-factor. A strain-independent reduction of the magnetic anisotropy and dam** by adapting the cation distribution is demonstrated.
△ Less
Submitted 7 April, 2020; v1 submitted 22 August, 2019;
originally announced August 2019.
-
Accurate high-resolution depth profiling of magnetron sputtered transition metal alloy films containing light species: A multi-method approach
Authors:
M. V. Moro,
R. Holeňák,
L. Zendejas Medina,
U. Jansson,
D. Primetzhofer
Abstract:
We present an assessment of a multi-method approach based on ion beam analysis to obtain high-resolution depth profiles of the total chemical composition of complex alloy systems. As a model system we employ an alloy based on several transition metals and containing light species. Samples have been investigated by a number of different ion-beam based techniques, i.e., Rutherford Backscattering Spe…
▽ More
We present an assessment of a multi-method approach based on ion beam analysis to obtain high-resolution depth profiles of the total chemical composition of complex alloy systems. As a model system we employ an alloy based on several transition metals and containing light species. Samples have been investigated by a number of different ion-beam based techniques, i.e., Rutherford Backscattering Spectrometry, Particle-Induced X-ray Emission, Elastic Backscattering Spectrometry and Time-of-Flight/Energy Elastic Recoil Detection Analysis. Sets of spectra obtained from these different techniques were analyzed both independently and following an iterative and self-consistent approach yielding a more accurate depth profile of the sample, including both metallic heavy constituents (Cr, Fe and Ni) as well as the rather reactive light species (C, O) in the alloy. A quantitative comparison in terms of achievable precision and accuracy is made and the limitations of the single method approach are discussed for the different techniques. The multi-method approach is shown to yield significantly improved and accurate information on stoichiometry, depth distribution, and thickness of the alloy with the improvements being decisive for a detailed correlation of composition to the material properties such as corrosion strength. The study also shows the increased relative importance of experimental statistics for the achievable accuracy in the multi-method approach.
△ Less
Submitted 12 July, 2019; v1 submitted 26 December, 2018;
originally announced December 2018.
-
MultiSIMNRA: a computational tool for self-consistent ion beam analysis using SIMNRA
Authors:
Tiago F. Silva,
Matej Mayer,
Cleber L. Rodrigues,
Marcos V. Moro,
Gustavo F. Trindade,
Fernando R. Aguirre,
Nemitala Added,
Márcia A. Rizzutto,
Manfredo H. Tabacniks
Abstract:
SIMNRA is widely adopted by the scientific community of ion beam analysis for interpretation of nuclear scattering analysis. Taking advantage of its recognized reliability and quality of the simulations, we developed a computer program that use parallel sessions of SIMNRA to perform self-consistent analysis for energy spectra of a given sample obtained using different techniques or experimental se…
▽ More
SIMNRA is widely adopted by the scientific community of ion beam analysis for interpretation of nuclear scattering analysis. Taking advantage of its recognized reliability and quality of the simulations, we developed a computer program that use parallel sessions of SIMNRA to perform self-consistent analysis for energy spectra of a given sample obtained using different techniques or experimental setups. In this paper, we present a result using MultiSIMNRA on self-consistent analysis for a multielemental thin film produced by magnetron sputtering. The results demonstrate the potentialities of the self-consistent analysis and its feasibility when using MultiSIMNRA.
△ Less
Submitted 1 March, 2018;
originally announced March 2018.
-
Electronic Stop** of Slow Protons in Transition and Rare Earth Metals: Breakdown of the Free Electron Gas Concept
Authors:
D. Roth,
B. Bruckner,
M. V. Moro,
S. Gruber,
D. Goebl,
J. I. Juaristi,
M. Alducin,
R. Steinberger,
J. Duchoslav,
D. Primetzhofer,
P. Bauer
Abstract:
The electronic stop** cross sections (SCS) of Ta and Gd for slow protons have been investigated experimentally. The data are compared to the results for Pt and Au to learn how electronic stop** in transition and rare earth metals correlates with features of the electronic band structures. The extraordinarily high SCS observed for protons in Ta and Gd cannot be understood in terms of a free ele…
▽ More
The electronic stop** cross sections (SCS) of Ta and Gd for slow protons have been investigated experimentally. The data are compared to the results for Pt and Au to learn how electronic stop** in transition and rare earth metals correlates with features of the electronic band structures. The extraordinarily high SCS observed for protons in Ta and Gd cannot be understood in terms of a free electron gas model, but are related to the high densities of both occupied and unoccupied electronic states in these metals.
△ Less
Submitted 9 March, 2017;
originally announced March 2017.
-
Scaling laws and universality in the choice of election candidates
Authors:
M. C. Mantovani,
H. V. Ribeiro,
M. V. Moro,
S. Picoli Jr.,
R. S. Mendes
Abstract:
Nowadays there is an increasing interest of physicists in finding regularities related to social phenomena. This interest is clearly motivated by applications that a statistical mechanical description of the human behavior may have in our society. By using this framework, we address this work to cover an open question related to elections: the choice of elections candidates (candidature process).…
▽ More
Nowadays there is an increasing interest of physicists in finding regularities related to social phenomena. This interest is clearly motivated by applications that a statistical mechanical description of the human behavior may have in our society. By using this framework, we address this work to cover an open question related to elections: the choice of elections candidates (candidature process). Our analysis reveals that, apart from the social motivations, this system displays features of traditional out-of-equilibrium physical phenomena such as scale-free statistics and universality. Basically, we found a non-linear (power law) mean correspondence between the number of candidates and the size of the electorate (number of voters), and also that this choice has a multiplicative underlying process (lognormal behavior). The universality of our findings is supported by data from 16 elections from 5 countries. In addition, we show that aspects of network scale-free can be connected to this universal behavior.
△ Less
Submitted 20 September, 2011;
originally announced September 2011.