-
Velocity Gauge Potentials in Electrodynamics
Authors:
D. V. Giri,
Frederick M. Tesche,
Michael A. Morgan
Abstract:
Vector and scalar potentials are used for convenience in solving boundary value problems involving electromagnetic (EM) fields. The potentials are made unique by choosing a non-unique gauge relationship. The most commonly used gauges are those named for Lorenz and Coulomb, both of which may be defined as special cases of what is termed the velocity gauge, or v-gauge. This generalized gauge is not…
▽ More
Vector and scalar potentials are used for convenience in solving boundary value problems involving electromagnetic (EM) fields. The potentials are made unique by choosing a non-unique gauge relationship. The most commonly used gauges are those named for Lorenz and Coulomb, both of which may be defined as special cases of what is termed the velocity gauge, or v-gauge. This generalized gauge is not usually taught to students of electrodynamics. In this paper, we review properties of the velocity gauge, including EM field invariance, and demonstrate its application via an example.
△ Less
Submitted 27 January, 2022;
originally announced January 2022.
-
Reflectionless Filter Topologies Supporting Arbitrary Ladder Prototypes
Authors:
Matthew A. Morgan,
Wavley M. Groves III,
Tod A. Boyd
Abstract:
Modifications of the authors' previously-published, generalized, lumped-element, reflectionless filter topologies are presented which remove the original constraints on the relative values of its prototype parameters. Thus, any transfer function which can be realized as the transmission or reflection coefficient of a conventional ladder prototype may now be implemented in reflectionless form --- t…
▽ More
Modifications of the authors' previously-published, generalized, lumped-element, reflectionless filter topologies are presented which remove the original constraints on the relative values of its prototype parameters. Thus, any transfer function which can be realized as the transmission or reflection coefficient of a conventional ladder prototype may now be implemented in reflectionless form --- that is, having the same transfer function in transmission but with identically zero reflection coefficient at both ports and at all frequencies from DC to infinity, given ideal elements. The theoretical basis of these modifications is explained, and then tested via the construction of passive, reflectionless low-pass filter prototypes that, in the prior topology, would have required negative reactive elements. The results show excellent agreement with theory.
△ Less
Submitted 29 June, 2018;
originally announced July 2018.
-
A Cryogenic SiGe Low Noise Amplifier Optimized for Phased Array Feeds
Authors:
Wavley M. Groves III,
Matthew A. Morgan
Abstract:
The growing number of phased array feeds (PAF) being built for radio astronomy demonstrates an increasing need for low noise amplifiers (LNA) that are designed for repeatability, low noise, and ease of manufacture. Specific design features which help to achieve these goals include the use of unpackaged transistors (for cryogenic operation), single-polarity biasing, straight plug-in RF interfaces t…
▽ More
The growing number of phased array feeds (PAF) being built for radio astronomy demonstrates an increasing need for low noise amplifiers (LNA) that are designed for repeatability, low noise, and ease of manufacture. Specific design features which help to achieve these goals include the use of unpackaged transistors (for cryogenic operation), single-polarity biasing, straight plug-in RF interfaces to facilitate installation and re-work, and the use of off-the shelf components. The focal L-band array for the Green Bank Telescope (FLAG) is a cooperative effort by Brigham Young University (BYU) and the National Radio Astronomy Observatory (NRAO) using warm dipole antennae and cryogenic Silicon Germanium Heterojunction Bipolar Transistor (SiGe HBT) LNAs. These LNAs have an in band gain average of 38 dB and 4.85 Kelvin average noise temperature. Although the FLAG instrument was the driving instrument behind this development, most of the key features of the design and the advantages they offer apply broadly to other array feeds, including independent-beam and phased, and for many antenna types such as horn, dipole, Vivaldi, connected-bowtie, etc. This paper will focus on the unique requirements array feeds have for low noise amplifiers and how amplifier manufacturing can accommodate these needs.
△ Less
Submitted 5 May, 2017; v1 submitted 13 December, 2016;
originally announced December 2016.
-
Custom Chipset and Compact Module Design for a 75-110 GHz Laboratory Signal Source
Authors:
Matthew A. Morgan,
Tod A. Boyd,
Jason J. Castro
Abstract:
We report on the development and characterization of a compact, full-waveguide bandwidth (WR-10) signal source for general-purpose testing of mm-wave components. The MMIC-based multichip module is designed for compactness and ease-of-use, especially in size-constrained test sets such as a wafer probe station. It takes as input a cm-wave CW reference and provides a factor of three frequency multipl…
▽ More
We report on the development and characterization of a compact, full-waveguide bandwidth (WR-10) signal source for general-purpose testing of mm-wave components. The MMIC-based multichip module is designed for compactness and ease-of-use, especially in size-constrained test sets such as a wafer probe station. It takes as input a cm-wave CW reference and provides a factor of three frequency multiplication as well as amplification, output power adjustment, and in-situ output power monitoring. It utilizes a number of custom MMIC chips such as a Schottky-diode limiter and a broadband mm-wave detector, both designed explicitly for this module, as well as custom millimeter-wave multipliers and amplifiers reported in previous papers.
△ Less
Submitted 19 July, 2016;
originally announced July 2016.
-
A 10-100 GHz Coax To Double-Ridged Waveguide Launcher and Horn Antenna
Authors:
Matthew A. Morgan,
Tod A. Boyd
Abstract:
The design, fabrication, and measurement of a coax to double-ridged waveguide launcher and horn antenna is presented. The novel launcher design employs two symmetric field probes across the ridge gap to minimize spreading inductance in the transition, and achieves better than 15 dB return loss over a 10:1 bandwidth. The aperture-matched horn uses a half-cosine transition into a linear taper for th…
▽ More
The design, fabrication, and measurement of a coax to double-ridged waveguide launcher and horn antenna is presented. The novel launcher design employs two symmetric field probes across the ridge gap to minimize spreading inductance in the transition, and achieves better than 15 dB return loss over a 10:1 bandwidth. The aperture-matched horn uses a half-cosine transition into a linear taper for the outer waveguide dimensions and ridge width, and a power-law scaled gap in order to realize monotonically-varying cutoff frequencies, thus avoiding the appearance of trapped mode resonances. It achieves a nearly constant beamwidth in both E- and H-planes for an overall directivity of about 16.5 dB from 10-100 GHz.
△ Less
Submitted 30 March, 2015;
originally announced March 2015.
-
Reflectionless Filter Structures
Authors:
Matthew A. Morgan,
Tod A. Boyd
Abstract:
This paper expands on the previously described reflectionless filters - that is, filters having, in principle, identically-zero reflection coefficient at all frequencies - by introducing a wide variety of new reflectionless structures that were not part of the original publication. In addition to extending the lumped-element derivation to include transmission line filters, this is achieved by the…
▽ More
This paper expands on the previously described reflectionless filters - that is, filters having, in principle, identically-zero reflection coefficient at all frequencies - by introducing a wide variety of new reflectionless structures that were not part of the original publication. In addition to extending the lumped-element derivation to include transmission line filters, this is achieved by the introduction of a novel method wherein the left- and right-hand side stop-band terminations are coupled to each other using a two-port sub-network. Specific examples of the sub-network are given which increase the stop-band attenuation per filter cell and steepen the cutoff response without disrupting the reflectionless property or increasing the insertion-loss in the pass-band. It is noteworthy that a common feature of all the structures derived by these methods is that most, if not all, of the reactive elements are of equal normalized value. This greatly simplifies the tuning requirements, and has facilitated their implementation as monolithic microwave integrated circuits (MMICs). A number of examples of MMIC reflectionless filters constructed in this way are presented and their results compared to the theory.
△ Less
Submitted 5 February, 2015; v1 submitted 29 July, 2014;
originally announced July 2014.
-
Unformatted Digital Fiber-Optic Data Transmission for Radio Astronomy Front-Ends
Authors:
Matthew A. Morgan,
J. Richard Fisher,
Jason J. Castro
Abstract:
We report on the development of a prototype integrated receiver front-end that combines all conversions from RF to baseband, from analog to digital, and from copper to fiber into one compact assembly, with the necessary gain and stability suitable for radio astronomy applications. The emphasis in this article is on a novel digital data link over optical fiber which requires no formatting in the fr…
▽ More
We report on the development of a prototype integrated receiver front-end that combines all conversions from RF to baseband, from analog to digital, and from copper to fiber into one compact assembly, with the necessary gain and stability suitable for radio astronomy applications. The emphasis in this article is on a novel digital data link over optical fiber which requires no formatting in the front-end, greatly reducing the complexity, bulk, and power consumption of digital electronics inside the antenna, facilitating its integration with the analog components, and minimizing the self-generated radio-frequency interference (RFI) which could leak into the signal path. Management of the serial data link is performed entirely in the back-end based on the statistical properties of signals with a strong random noise component. In this way, the full benefits of precision and stability afforded by conventional digital data transmission are realized with far less overhead at the focal plane of a radio telescope.
△ Less
Submitted 3 May, 2013;
originally announced May 2013.
-
Graphical Prediction of Trapped Mode Resonances in Sub-mm and THz Waveguide Networks
Authors:
Matthew A. Morgan,
Shing-Kuo Pan
Abstract:
An analytical method for the visualization and prediction of trapped-mode resonances based on the dimensions of a dispersive microwave network is described. The method as explained is intuitive, easy to implement, and has proven itself to be a useful tool in the avoidance of problems associated with trapped modes prior to fabrication, as well as to correct those problems in designs where this desi…
▽ More
An analytical method for the visualization and prediction of trapped-mode resonances based on the dimensions of a dispersive microwave network is described. The method as explained is intuitive, easy to implement, and has proven itself to be a useful tool in the avoidance of problems associated with trapped modes prior to fabrication, as well as to correct those problems in designs where this design detail was overlooked.
△ Less
Submitted 13 December, 2012; v1 submitted 12 December, 2012;
originally announced December 2012.
-
Anisotropic covering of fractal sets
Authors:
M. Wilkinson,
H. R. Kennard,
M. A. Morgan
Abstract:
We consider the optimal covering of fractal sets in a two-dimensional space using ellipses which become increasingly anisotropic as their size is reduced. If the semi-minor axis is εand the semi-major axis is δ, we set δ=ε^α, where 0<α<1 is an exponent characterising the anisotropy of the covers. For point set fractals, in most cases we find that the number of points N which can be covered by an e…
▽ More
We consider the optimal covering of fractal sets in a two-dimensional space using ellipses which become increasingly anisotropic as their size is reduced. If the semi-minor axis is εand the semi-major axis is δ, we set δ=ε^α, where 0<α<1 is an exponent characterising the anisotropy of the covers. For point set fractals, in most cases we find that the number of points N which can be covered by an ellipse centred on any given point has expectation value < N > ~ ε^β, where βis a generalised dimension. We investigate the function β(α) numerically for various sets, showing that it may be different for sets which have the same fractal dimension.
△ Less
Submitted 17 April, 2012;
originally announced April 2012.
-
Thinking Outside the Band: Absorptive Filtering
Authors:
Matthew A. Morgan
Abstract:
The reflectionless filter cell described in this article alleviates many system problems associated with excess out-of-band gain, impedance mismatches, and component interactions. The simplest filter cell exhibits a third-order Inverse Chebyshev response with 14.47 dB peak stopband attenuation, and several can be cascaded for additional attenuation as needed. They are simple to design and easy to…
▽ More
The reflectionless filter cell described in this article alleviates many system problems associated with excess out-of-band gain, impedance mismatches, and component interactions. The simplest filter cell exhibits a third-order Inverse Chebyshev response with 14.47 dB peak stopband attenuation, and several can be cascaded for additional attenuation as needed. They are simple to design and easy to use - for much like small fixed attenuators ("pads"), they can be placed anywhere in the signal path desired without fear of causing unwanted standing waves, and instead reducing them where they already exist beyond the intended frequency range. Compared to conventional filter topologies with similar cutoff frequencies, they exhibit an order of magnitude greater amplitude and phase stability, ensuring accurate and repeatable complex gain in calibrated systems. Finally, the component requirements are moderate in value and minimal in number, easing their implementation while improving design yield, and extending the applicability of a given component technology beyond the normal range, both above and below.
△ Less
Submitted 9 March, 2012;
originally announced March 2012.
-
Paraxial and nonparaxial polynomial beams and the analytic approach to propagation
Authors:
Mark R Dennis,
Joerg B Goette,
Robert P King,
Michael A Morgan,
Miguel A Alonso
Abstract:
We construct solutions of the paraxial and Helmholtz equations which are polynomials in their spatial variables. These are derived explicitly using the angular spectrum method and generating functions. Paraxial polynomials have the form of homogeneous Hermite and Laguerre polynomials in Cartesian and cylindrical coordinates respectively, analogous to heat polynomials for the diffusion equation. No…
▽ More
We construct solutions of the paraxial and Helmholtz equations which are polynomials in their spatial variables. These are derived explicitly using the angular spectrum method and generating functions. Paraxial polynomials have the form of homogeneous Hermite and Laguerre polynomials in Cartesian and cylindrical coordinates respectively, analogous to heat polynomials for the diffusion equation. Nonparaxial polynomials are found by substituting monomials in the propagation variable $z$ with reverse Bessel polynomials. These explicit analytic forms give insight into the mathematical structure of paraxially and nonparaxially propagating beams, especially in regards to the divergence of nonparaxial analogs to familiar paraxial beams.
△ Less
Submitted 30 August, 2011;
originally announced August 2011.
-
Mutual Coupling in Compact Orthomode Transducers
Authors:
Matthew A. Morgan
Abstract:
The scattering parameters of generalized compact orthomode transducers using azimuthally-distributed field probes in a dual-mode waveguide are analyzed. Theoretical expressions constraining the mutual coupling between the probes are derived and evaluated for three- and four-probe orthomode transducers with and without a coaxial reference port for calibration injection. The mutual coupling is shown…
▽ More
The scattering parameters of generalized compact orthomode transducers using azimuthally-distributed field probes in a dual-mode waveguide are analyzed. Theoretical expressions constraining the mutual coupling between the probes are derived and evaluated for three- and four-probe orthomode transducers with and without a coaxial reference port for calibration injection. The mutual coupling is shown to be identically zero or cancel coherently in all cases, suggesting that radiometric receivers with the best possible system noise temperature may be realized using these topologies.
△ Less
Submitted 10 January, 2011;
originally announced January 2011.
-
Synthesis of a New Class of Reflectionless Filter Prototypes
Authors:
Matthew A. Morgan,
Tod A. Boyd
Abstract:
A design methodology and synthesis equations are described for lumped-element filter prototypes having low-pass, high-pass, band-pass, or band-stop characteristics with theoretically perfect input- and output-match at all frequencies. Such filters are a useful building block in a wide variety of systems in which the highly reactive out-of-band termination presented by a conventional filter is unde…
▽ More
A design methodology and synthesis equations are described for lumped-element filter prototypes having low-pass, high-pass, band-pass, or band-stop characteristics with theoretically perfect input- and output-match at all frequencies. Such filters are a useful building block in a wide variety of systems in which the highly reactive out-of-band termination presented by a conventional filter is undesirable. The filter topology is first derived from basic principles. Then the relative merits of several implementations and tunings are compared via simulation. Finally, measured data on low-pass and band-pass filter examples are presented which illustrate the practical advantages as well as showing excellent agreement between measurement and theory.
△ Less
Submitted 20 August, 2010;
originally announced August 2010.
-
Compact Orthomode Transducers Using Digital Polarization Synthesis
Authors:
Matthew A. Morgan,
J. Richard Fisher,
Tod A. Boyd
Abstract:
In this paper we present a novel class of compact orthomode transducers which use digital calibration to synthesize the desired polarization vectors while maintaining high isolation and minimizing mass and volume. These digital orthomode transducers consist of an arbitrary number of planar probes in a circular waveguide, each of which is connected to an independent receiver chain designed for stab…
▽ More
In this paper we present a novel class of compact orthomode transducers which use digital calibration to synthesize the desired polarization vectors while maintaining high isolation and minimizing mass and volume. These digital orthomode transducers consist of an arbitrary number of planar probes in a circular waveguide, each of which is connected to an independent receiver chain designed for stability of complex gain. The outputs of each receiver chain are then digitized and combined numerically with calibrated, complex coefficients. Measurements on two prototype digital orthomode transducers, one with three probes and one with four, show better than 50 dB polarization isolation over a 10 C temperature range with a single calibration.
△ Less
Submitted 20 August, 2010;
originally announced August 2010.
-
Experiments with calibrated digital sideband separating downconversion
Authors:
Matthew A. Morgan,
J. Richard Fisher
Abstract:
This article reports on the first step in a focused program to re-optimize radio astronomy receiver architecture to better take advantage of the latest advancements in commercial digital technology. Specifically, an L-Band sideband-separating downconverter has been built using a combination of careful (but ultimately very simple) analog design and digital signal processing to achieve wideband do…
▽ More
This article reports on the first step in a focused program to re-optimize radio astronomy receiver architecture to better take advantage of the latest advancements in commercial digital technology. Specifically, an L-Band sideband-separating downconverter has been built using a combination of careful (but ultimately very simple) analog design and digital signal processing to achieve wideband downconversion of an RFI-rich frequency spectrum to baseband in a single mixing step, with a fixed-frequency Local Oscillator and stable sideband isolation exceeding 50 dB over a 12 degree C temperature range.
△ Less
Submitted 29 January, 2010;
originally announced January 2010.
-
Next Generation Radio Astronomy Receiver Systems
Authors:
Matthew A. Morgan,
J. Richard Fisher
Abstract:
Radio astronomy observations in the coming decade will require new levels of sensitivity while map** large regions of space with much greater efficiency than is achieved with current telescopes. This requires new instrumentation with the greatest achievable sensitivity, dynamic range, and field of view. Receiver noise is quickly approaching fundamental limits at most radio wavelengths, so sign…
▽ More
Radio astronomy observations in the coming decade will require new levels of sensitivity while map** large regions of space with much greater efficiency than is achieved with current telescopes. This requires new instrumentation with the greatest achievable sensitivity, dynamic range, and field of view. Receiver noise is quickly approaching fundamental limits at most radio wavelengths, so significant gains in sensitivity can only be made by increasing collecting area. Jointly, these requirements suggest using large arrays of smaller antennas, or many moderate-size antennas equipped with multi-beam arrays. The challenge is to develop receivers and wide bandwidth data transport systems which are lower cost, more compact, more reliable, lower weight, and more reproducible than the best current systems, with no compromise to performance. This can be achieved with a greater degree of component integration, extensive use of digital signal processing and transport, and replacement of functions currently performed in bulky waveguide and coaxial cable components with digital arithmetic and thin optical fibers. In this white paper, we outline the complete redesign and re-optimization of receiver architecture to take advantage of the latest advancements in commercial technology. This involves the seamless integration of the conversions from RF to baseband, from analog to digital, and from copper to fiber within a single receiver module.
△ Less
Submitted 26 August, 2009;
originally announced August 2009.
-
Large Instrument Development for Radio Astronomy
Authors:
J. R. Fisher,
R. F. Bradley,
W. F. Brisken,
W. D. Cotton,
D. T. Emerson,
A. R. Kerr,
R. J. Lacasse,
M. A. Morgan,
P. J. Napier,
R. D. Norrod,
J. M. Payne,
M. W. Pospieszalski,
A. Symmes,
A. R. Thompson,
J. C. Webber
Abstract:
This white paper offers cautionary observations about the planning and development of new, large radio astronomy instruments. Complexity is a strong cost driver so every effort should be made to assign differing science requirements to different instruments and probably different sites. The appeal of shared resources is generally not realized in practice and can often be counterproductive. Instr…
▽ More
This white paper offers cautionary observations about the planning and development of new, large radio astronomy instruments. Complexity is a strong cost driver so every effort should be made to assign differing science requirements to different instruments and probably different sites. The appeal of shared resources is generally not realized in practice and can often be counterproductive. Instrument optimization is much more difficult with longer lists of requirements, and the development process is longer and less efficient. More complex instruments are necessarily further behind the technology state of the art because of longer development times. Including technology R&D in the construction phase of projects is a growing trend that leads to higher risks, cost overruns, schedule delays, and project de-sco**. There are no technology breakthroughs just over the horizon that will suddenly bring down the cost of collecting area. Advances come largely through careful attention to detail in the adoption of new technology provided by industry and the commercial market. Radio astronomy instrumentation has a very bright future, but a vigorous long-term R&D program not tied directly to specific projects needs to be restored, fostered, and preserved.
△ Less
Submitted 26 August, 2009;
originally announced August 2009.
-
Shock fragmentation model for gravitational collapse
Authors:
M. Wilkinson,
B. Mehlig,
M. A. Morgan
Abstract:
A cloud of gas collapsing under gravity will fragment. We present a new theory for this process, in which layers shocked gas fragment due to their gravitational instability. Our model explains why angular momentum does not inhibit the collapse process. The theory predicts that the fragmentation process produces objects which are significantly smaller than most stars, implying that accretion onto…
▽ More
A cloud of gas collapsing under gravity will fragment. We present a new theory for this process, in which layers shocked gas fragment due to their gravitational instability. Our model explains why angular momentum does not inhibit the collapse process. The theory predicts that the fragmentation process produces objects which are significantly smaller than most stars, implying that accretion onto the fragments plays an essential role in determining the initial masses of stars. This prediction is also consistent with the hypothesis that planets can be produced by gravitational collapse.
△ Less
Submitted 15 December, 2008;
originally announced December 2008.
-
Non-adiabatic transitions in multi-level systems
Authors:
Michael Wilkinson,
Michael A. Morgan
Abstract:
In a quantum system with a smoothly and slowly varying Hamiltonian, which approaches a constant operator at times $t\to \pm \infty$, the transition probabilities between adiabatic states are exponentially small. They are characterized by an exponent that depends on a phase integral along a path around a set of branch points connecting the energy level surfaces in complex time. Only certain seque…
▽ More
In a quantum system with a smoothly and slowly varying Hamiltonian, which approaches a constant operator at times $t\to \pm \infty$, the transition probabilities between adiabatic states are exponentially small. They are characterized by an exponent that depends on a phase integral along a path around a set of branch points connecting the energy level surfaces in complex time. Only certain sequences of branch points contribute. We propose that these sequences are determined by a topological rule involving the Stokes lines attached to the branch points. Our hypothesis is supported by theoretical arguments and results of numerical experiments.
△ Less
Submitted 4 August, 1999;
originally announced August 1999.
