-
Jointed Tails Enhance Control of Three-dimensional Body Rotation
Authors:
Xun Fu,
Bohao Zhang,
Ceri J. Weber,
Kimberly L. Cooper,
Ram Vasudevan,
Talia Y. Moore
Abstract:
Tails used as inertial appendages induce body rotations of animals and robots, a phenomenon that is governed largely by the ratio of the body and tail moments of inertia. However, vertebrate tails have more degrees of freedom (e.g., number of joints, rotational axes) than most current theoretical models and robotic tails. To understand how morphology affects inertial appendage function, we develop…
▽ More
Tails used as inertial appendages induce body rotations of animals and robots, a phenomenon that is governed largely by the ratio of the body and tail moments of inertia. However, vertebrate tails have more degrees of freedom (e.g., number of joints, rotational axes) than most current theoretical models and robotic tails. To understand how morphology affects inertial appendage function, we developed an optimization-based approach that finds the maximally effective tail trajectory and measures error from a target trajectory. For tails of equal total length and mass, increasing the number of equal-length joints increased the complexity of maximally effective tail motions. When we optimized the relative lengths of tail bones while kee** the total tail length, mass, and number of joints the same, this optimization-based approach found that the lengths match the pattern found in the tail bones of mammals specialized for inertial maneuvering. In both experiments, adding joints enhanced the performance of the inertial appendage, but with diminishing returns, largely due to the total control effort constraint. This optimization-based simulation can compare the maximum performance of diverse inertial appendages that dynamically vary in moment of inertia in 3D space, predict inertial capabilities from skeletal data, and inform the design of robotic inertial appendages.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Humans prefer interacting with slow, less realistic butterfly simulations
Authors:
Paige L. Reiter,
Talia Y. Moore
Abstract:
How should zoomorphic, or bio-inspired, robots indicate to humans that interactions will be safe and fun? Here, a survey is used to measure how human willingness to interact with a simulated butterfly robot is affected by different flight patterns. Flap** frequency, flap to glide ratio, and flap** pattern were independently varied based on a literature review of butterfly and moth flight. Huma…
▽ More
How should zoomorphic, or bio-inspired, robots indicate to humans that interactions will be safe and fun? Here, a survey is used to measure how human willingness to interact with a simulated butterfly robot is affected by different flight patterns. Flap** frequency, flap to glide ratio, and flap** pattern were independently varied based on a literature review of butterfly and moth flight. Human willingness to interact with these simulations and demographic information were self-reported via an online survey. Low flap** frequency and greater proportion of gliding were preferred, and prior experience with butterflies strongly predicted greater interaction willingness. The preferred flight parameters correspond to migrating butterfly flight patterns that are rarely directly observed by humans and do not correspond to the species that inspired the wing shape of the robot model. The most realistic butterfly simulations were among the least preferred. An analysis of animated butterflies in popular media revealed a convergence on slower, less realistic flight parameters. This iterative and interactive artistic process provides a model for determining human preferences and identifying functional requirements of robots for human interaction. Thus, the robotic design process can be streamlined by leveraging animated models and surveys prior to construction.
△ Less
Submitted 25 April, 2024;
originally announced April 2024.
-
SKOOTR: A SKating, Omni-Oriented, Tripedal Robot
Authors:
Adam Joshua Hung,
Challen Enninful Adu,
Talia Y. Moore
Abstract:
In both animals and robots, locomotion capabilities are determined by the physical structure of the system. The majority of legged animals and robots are bilaterally symmetric, which facilitates locomotion with consistent headings and obstacle traversal, but leads to constraints in their turning ability. On the other hand, radially symmetric animals have demonstrated rapid turning abilities enable…
▽ More
In both animals and robots, locomotion capabilities are determined by the physical structure of the system. The majority of legged animals and robots are bilaterally symmetric, which facilitates locomotion with consistent headings and obstacle traversal, but leads to constraints in their turning ability. On the other hand, radially symmetric animals have demonstrated rapid turning abilities enabled by their omni-directional body plans. Radially symmetric tripedal robots are able to turn instantaneously, but are commonly constrained by needing to change direction with every step, resulting in inefficient and less stable locomotion. We address these challenges by introducing a novel design for a tripedal robot that has both frictional and rolling contacts. Additionally, a freely rotating central sphere provides an added contact point so the robot can retain a stable tripod base of support while lifting and pushing with any one of its legs. The SKating, Omni-Oriented, Tripedal Robot (SKOOTR) is more versatile and stable than other existing tripedal robots. It is capable of multiple forward gaits, multiple turning maneuvers, obstacle traversal, and stair climbing. SKOOTR has been designed to facilitate customization for diverse applications: it is fully open-source, is constructed with 3D printed or off-the-shelf parts, and costs approximately $500 USD to build.
△ Less
Submitted 6 February, 2024;
originally announced February 2024.
-
Design and Characterization of 3D Printed, Open-Source Actuators for Legged Locomotion
Authors:
Karthik Urs,
Challen Enninful Adu,
Elliott J. Rouse,
Talia Y. Moore
Abstract:
Impressive animal locomotion capabilities are mediated by the co-evolution of the skeletal morphology and muscular properties. Legged robot performance would also likely benefit from the co-optimization of actuators and leg morphology. However, development of custom actuators for legged robots is often expensive and time consuming, which discourages roboticists from pursuing performance gains affo…
▽ More
Impressive animal locomotion capabilities are mediated by the co-evolution of the skeletal morphology and muscular properties. Legged robot performance would also likely benefit from the co-optimization of actuators and leg morphology. However, development of custom actuators for legged robots is often expensive and time consuming, which discourages roboticists from pursuing performance gains afforded by application-specific actuator optimization. This paper presents open-source designs for two quasi-direct-drive actuators with performance regimes appropriate for an 8--15 kg robot, built completely with off the shelf and 3D-printed components for less than $200 USD each. The mechanical, electrical, and thermal properties of each actuator are characterized and compared to benchmark data. Actuators subjected to 420k strides of gait data experienced only a 2% reduction in efficiency and 26 mrad in backlash growth, demonstrating viability for rigorous and sustained research applications. We present a thermal solution that nearly doubles the thermally-driven torque limits of our plastic actuator design. The performance results are comparable to traditional metallic actuators for use in high-speed legged robots of the same scale. These 3D printed designs demonstrate an approach for designing and characterizing low-cost, highly customizable, and highly reproducible actuators, democratizing the field of actuator design and enabling co-design and optimization of actuators and robot legs.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Alternative Metrics to Select Motors for Quasi-Direct Drive Actuators
Authors:
Karthik Urs,
Challen Enninful Adu,
Elliott J. Rouse,
Talia Y. Moore
Abstract:
Robotic systems for legged locomotion -- including legged robots, exoskeletons, and prosthetics -- require actuators with low inertia and high output torque. Traditionally, motors have been selected for these applications by maximizing the motor gap radius. We present alternative metrics for motor selection that are invariant to transmission ratio. The proposed metrics reward minimizing the motor…
▽ More
Robotic systems for legged locomotion -- including legged robots, exoskeletons, and prosthetics -- require actuators with low inertia and high output torque. Traditionally, motors have been selected for these applications by maximizing the motor gap radius. We present alternative metrics for motor selection that are invariant to transmission ratio. The proposed metrics reward minimizing the motor inertia while maximizing the torque and motor constants without special consideration for gap radius, providing a better balance of properties for legged locomotion applications. We rigorously characterize the T-Motor RI50 and demonstrate the use of the metrics by comparing the RI50 to the widely-used T-Motor U8 as a case study.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Emulating duration and curvature of coral snake anti-predator thrashing behaviors using a soft-robotic platform
Authors:
Shannon M. Danforth,
Margaret Kohler,
Daniel Bruder,
Alison R. Davis Rabosky,
Sridhar Kota,
Ram Vasudevan,
Talia Y. Moore
Abstract:
This paper presents a soft-robotic platform for exploring the ecological relevance of non-locomotory movements via animal-robot interactions. Coral snakes (genus Micrurus) and their mimics use vigorous, non-locomotory, and arrhythmic thrashing to deter predation. There is variation across snake species in the duration and curvature of anti-predator thrashes, and it is unclear how these aspects of…
▽ More
This paper presents a soft-robotic platform for exploring the ecological relevance of non-locomotory movements via animal-robot interactions. Coral snakes (genus Micrurus) and their mimics use vigorous, non-locomotory, and arrhythmic thrashing to deter predation. There is variation across snake species in the duration and curvature of anti-predator thrashes, and it is unclear how these aspects of motion interact to contribute to snake survival. In this work, soft robots composed of fiber-reinforced elastomeric enclosures (FREEs) are developed to emulate the anti-predator behaviors of three genera of snake. Curvature and duration of motion are estimated for both live snakes and robots, providing a quantitative assessment of the robots' ability to emulate snake poses. The curvature values of the fabricated soft-robotic head, midsection, and tail segments are found to overlap with those exhibited by live snakes. Soft robot motion durations were less than or equal to those of snakes for all three genera. Additionally, combinations of segments were selected to emulate three specific snake genera with distinct anti-predatory behavior, producing curvature values that aligned well with live snake observations.
△ Less
Submitted 21 February, 2020;
originally announced February 2020.
-
Characterizing the limits of human stability during motion: perturbative experiment validates a model-based approach for the Sit-to-Stand task
Authors:
Patrick D. Holmes,
Shannon M. Danforth,
Xiao-Yu Fu,
Talia Y. Moore,
Ram Vasudevan
Abstract:
Falls affect a growing number of the population each year. Clinical methods to identify those at greatest risk for falls usually evaluate individuals while they perform specific motions such as balancing or Sit-to-Stand (STS). Unfortunately these techniques have been shown to have poor predictive power and are unable to identify the magnitude, direction, and timing of perturbations that can cause…
▽ More
Falls affect a growing number of the population each year. Clinical methods to identify those at greatest risk for falls usually evaluate individuals while they perform specific motions such as balancing or Sit-to-Stand (STS). Unfortunately these techniques have been shown to have poor predictive power and are unable to identify the magnitude, direction, and timing of perturbations that can cause an individual to lose stability during motion. To address this limitation, the recently proposed Stability Basin (SB) aims to characterize the set of perturbations that will cause an individual to fall under a specific motor control strategy. The SB is defined as the set of configurations that do not lead to failure for an individual under their chosen control strategy. This paper presents a novel method to compute the SB and the first experimental validation of the SB with an 11-person perturbative STS experiment involving forwards or backwards pulls from a motor-driven cable. The individually-constructed SBs are used to identify when a trial fails, i.e., when an individual must switch control strategies (indicated by a step or sit) to recover from a perturbation. The constructed SBs correctly predict the outcome of trials where failure was observed with over 90% accuracy, and correctly predict the outcome of successful trials with over 95% accuracy. The SB was compared to three other methods and was found to estimate the stable region with over 45% more accuracy in all cases. This study demonstrates that SBs offer a novel model-based approach for quantifying stability during motion, which could be used in physical therapy for individuals at risk of falling.
△ Less
Submitted 5 August, 2019;
originally announced August 2019.
