-
LANSCE-PSR Short-Pulse Upgrade for Improved Dark Sector Particle Searches with the Coherent Captain Mills Experiment
Authors:
R. G. Van de Water,
S. G. Biedron,
E. -C. Huang,
A. J. Hurd,
W. C. Louis,
S. V. Milton,
N. A. Moody,
P. deNiverville,
C. E. Taylor,
R. T. Thornton,
M. Fazio,
S. I. Sosa,
T. J. Schaub,
J. W. Lewellen
Abstract:
Proton beam dumps are prolific sources of charged and neutral pions, enabling a powerful technique to search for dark matter, axions, sterile neutrinos, tests of short baseline anomalies, and precision measurements of coherent nucleus scattering neutrinos (CEvNS). The Lujan neutron elastic scattering center at the Los Alamos Neutron Science Center (LANSCE) consists of an 800-MeV, short-pulse, 100-…
▽ More
Proton beam dumps are prolific sources of charged and neutral pions, enabling a powerful technique to search for dark matter, axions, sterile neutrinos, tests of short baseline anomalies, and precision measurements of coherent nucleus scattering neutrinos (CEvNS). The Lujan neutron elastic scattering center at the Los Alamos Neutron Science Center (LANSCE) consists of an 800-MeV, short-pulse, 100-kW proton and spallation neutron source where such searches are ongoing with the Coherent CAPTAIN Mills (CCM) 10-ton, liquid argon detector. The employment of fast timing coincidence of the beam with the detector is used to identify signals and reject background. The current beam time width is 300 ns with an intensity of $3.1 \times 10^{13}$ protons per pulse at 20 Hz. With upgrades to the Proton Storage Ring (PSR), the beam time width may be compressed to 30 ns with minimal intensity loss, allowing an increase in the signal to background (S/B) of more than 100 and an increase in the sensitivity for dark matter and sterile neutrino searches of an order of magnitude. This can be achieved with PSR accelerator upgrades on a time scale of a few years and at a modest cost.
△ Less
Submitted 4 April, 2022;
originally announced April 2022.
-
Ion Coulomb Crystals in Storage Rings for Quantum Information Science
Authors:
S. Brooks,
K. Brown,
F. Méot,
A. Nomerotski,
S. Peggs,
M. Palmer,
T. Roser,
T. Shaftan,
G. H. Hoffstaetter,
S. Nagaitsev,
J. Lykken,
J. Jarvis,
V. Lebedev,
G. Stancari,
A. Valishev,
A. Taylor,
A. Hurd,
N. Moody,
P. Muggli,
A. Aslam,
S. G. Biedron,
T. Bolin,
S. Sosa Guitron,
C. Gonzalez-Zacarias,
M. Larsson
, et al. (7 additional authors not shown)
Abstract:
Quantum information science is a growing field that promises to take computing into a new age of higher performance and larger scale computing as well as being capable of solving problems classical computers are incapable of solving. The outstanding issue in practical quantum computing today is scaling up the system while maintaining interconnectivity of the qubits and low error rates in qubit ope…
▽ More
Quantum information science is a growing field that promises to take computing into a new age of higher performance and larger scale computing as well as being capable of solving problems classical computers are incapable of solving. The outstanding issue in practical quantum computing today is scaling up the system while maintaining interconnectivity of the qubits and low error rates in qubit operations to be able to implement error correction and fault-tolerant operations. Trapped ion qubits offer long coherence times that allow error correction. However, error correction algorithms require large numbers of qubits to work properly. We can potentially create many thousands (or more) of qubits with long coherence states in a storage ring. For example, a circular radio-frequency quadrupole, which acts as a large circular ion trap and could enable larger scale quantum computing. Such a Storage Ring Quantum Computer (SRQC) would be a scalable and fault tolerant quantum information system, composed of qubits with very long coherence lifetimes. With computing demands potentially outpacing the supply of high-performance systems, quantum computing could bring innovation and scientific advances to particle physics and other DOE supported programs. Increased support of R$\&$D in large scale ion trap quantum computers would allow the timely exploration of this exciting new scalable quantum computer. The R$\&$D program could start immediately at existing facilities and would include the design and construction of a prototype SRQC. We invite feedback from and collaboration with the particle physics and quantum information science communities.
△ Less
Submitted 15 March, 2022; v1 submitted 13 March, 2022;
originally announced March 2022.
-
Quantum efficiency enhancement of bialkali photocathodes by an atomically thin layer on substrates
Authors:
Hisato Yamaguchi,
Fangze Liu,
Jeffrey DeFazio,
Mengjia Gaowei,
Lei Guo,
Anna Alexander,
Seong In Yoon,
Chohee Hyun,
Matthew Critchley,
John Sinsheimer,
Vitaly Pavlenko,
Derek Strom,
Kevin L. Jensen,
Daniel Finkenstadt,
Hyeon Suk Shin,
Masahiro Yamamoto,
John Smedley,
Nathan A. Moody
Abstract:
We report quantum efficiency (QE) enhancements in accelerator technology relevant antimonide photocathodes (K2CsSb) by interfacing them with atomically thin two-dimensional (2D) crystal layers. The enhancement occurs in a reflection mode, when a 2D crystal is placed in between the photocathodes and optically reflective substrates. Specifically, the peak QE at 405 nm (3.1 eV) increases by a relativ…
▽ More
We report quantum efficiency (QE) enhancements in accelerator technology relevant antimonide photocathodes (K2CsSb) by interfacing them with atomically thin two-dimensional (2D) crystal layers. The enhancement occurs in a reflection mode, when a 2D crystal is placed in between the photocathodes and optically reflective substrates. Specifically, the peak QE at 405 nm (3.1 eV) increases by a relative 10 percent, while the long wavelength response at 633 nm (2.0 eV) increases by a relative 36 percent on average and up to 80 percent at localized hot spot regions when photocathodes are deposited onto graphene coated stainless steel. There is a similar effect for photocathodes deposited on hexagonal boron nitride monolayer coatings using nickel substrates. The enhancement does not occur when reflective substrates are replaced with optically transparent sapphire. Optical transmission, X-ray diffraction (XRD) and X-ray fluorescence (XRF) revealed that thickness, crystal orientation, quality and elemental stoichiometry of photocathodes do not appreciably change due to 2D crystal coatings. These results suggest optical interactions are responsible for the QE enhancements when 2D crystal sublayers are present on reflective substrates, and provide a pathway toward a simple method of QE enhancement in semiconductor photocathodes by an atomically thin 2D crystal on substrates.
△ Less
Submitted 2 October, 2019;
originally announced October 2019.
-
Free-standing bialkali photocathodes using atomically thin substrates
Authors:
Hisato Yamaguchi,
Fangze Liu,
Jeffrey DeFazio,
Mengjia Gaowei,
Claudia W. Narvaez Villarrubia,
Junqi Xie,
John Sinsheimer,
Derek Strom,
Vitaly Pavlenko,
Kevin L. Jensen,
John Smedley,
Aditya D. Mohite,
Nathan A. Moody
Abstract:
We report successful deposition of high quantum efficiency (QE) bialkali antimonide K2CsSb photocathodes on graphene films. The results pave a pathway towards an ultimate goal of encapsulating technologically-relevant photocathodes for accelerator technology with an atomically-thin protecting layer to enhance lifetime while minimizing QE losses. A QE of 17 % at ~3.1 eV (405 nm) is the highest valu…
▽ More
We report successful deposition of high quantum efficiency (QE) bialkali antimonide K2CsSb photocathodes on graphene films. The results pave a pathway towards an ultimate goal of encapsulating technologically-relevant photocathodes for accelerator technology with an atomically-thin protecting layer to enhance lifetime while minimizing QE losses. A QE of 17 % at ~3.1 eV (405 nm) is the highest value reported so far on graphene substrates and is comparable to that obtained on stainless steel and nickel reference substrates. The spectral responses of the photocathodes on graphene exhibit signature features of K2CsSb including the characteristic absorption at ~2.5 eV. Materials characterization based on X-ray fluorescence (XRF) and X-ray diffraction (XRD) reveals that the composition and crystal quality of these photocathodes deposited on graphene is comparable to those deposited on a reference substrate. Quantitative agreement between optical calculations and QE measurements for the K2CsSb on free suspended graphene and a graphene coated metal substrate further confirms the high quality interface between the photocathodes and graphene. Finally, a correlation between the QE and graphene quality as characterized by Raman spectroscopy suggests that a lower density of atomistic defects in the graphene films leads to higher QE of the deposited K2CsSb photocathodes.
△ Less
Submitted 12 February, 2019; v1 submitted 27 February, 2018;
originally announced February 2018.
-
Active bialkali photocathodes on free-standing graphene substrates
Authors:
Hisato Yamaguchi,
Fangze Liu,
Jeffrey DeFazio,
Claudia W. Narvaez Villarrubia,
Daniel Finkenstadt,
Andrew Shabaev,
Kevin L. Jensen,
Vitaly Pavlenko,
Michael Mehl,
Sam Lambrakos,
Gautam Gupta,
Aditya D. Mohite,
Nathan A. Moody
Abstract:
The hexagonal structure of graphene gives rise to the property of gas impermeability, motivating its investigation for a new application: protection of semiconductor photocathodes in electron accelerators. These materials are extremely susceptible to degradation in efficiency through multiple mechanisms related to contamination from the local imperfect vacuum environment of the host photoinjector.…
▽ More
The hexagonal structure of graphene gives rise to the property of gas impermeability, motivating its investigation for a new application: protection of semiconductor photocathodes in electron accelerators. These materials are extremely susceptible to degradation in efficiency through multiple mechanisms related to contamination from the local imperfect vacuum environment of the host photoinjector. Few-layer graphene has been predicted to permit a modified photoemission response of protected photocathode surfaces, and recent experiments of single-layer graphene on copper have begun to confirm these predictions for single crystal metallic photocathodes. Unlike metallic photoemitters, the integration of an ultra-thin graphene barrier film with conventional semiconductor photocathode growth processes is not straightforward. A first step toward addressing this challenge is the growth and characterization of technologically relevant, high quantum efficiency bialkali photocathodes grown on ultra-thin free-standing graphene substrates. Photocathode growth on free-standing graphene provides the opportunity to integrate these two materials and study their interaction. Specifically, spectral response features and photoemission stability of cathodes grown on graphene substrates are compared to those deposited on established substrates. In addition we observed an increase of work function for the graphene encapsulated bialkali photocathode surfaces, which is predicted by our calculations. The results provide a unique demonstration of bialkali photocathodes on free-standing substrates, and indicate promise towards our goal of fabricating high-performance graphene encapsulated photocathodes with enhanced lifetime for accelerator applications.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
Practical circuits with Physarum Wires
Authors:
James G. H. Whiting,
Richard Mayne,
Nadine Moody,
Ben de Lacy Costello,
Andrew Adamatzky
Abstract:
Purpose: Protoplasmic tubes of Physarum polycephalum, also know as Physarum Wires (PW), have been previously suggested as novel bio- electronic components. Until recently, practical examples of electronic circuits using PWs have been limited. These PWs have been shown to be self repairing, offering significant advantage over traditional electronic components. This article documents work performed…
▽ More
Purpose: Protoplasmic tubes of Physarum polycephalum, also know as Physarum Wires (PW), have been previously suggested as novel bio- electronic components. Until recently, practical examples of electronic circuits using PWs have been limited. These PWs have been shown to be self repairing, offering significant advantage over traditional electronic components. This article documents work performed to produce practical circuits using PWs. Method: We have demonstrated through manufacture and testing of hybrid circuits that PWs can be used to produce a variety of practical electronic circuits. A purality of different applications of PWs have been tested to show the universality of PWs in analogue and digital electronics. Results: Voltage dividers can be produced using a pair of PWs in series with an output voltage accurate to within 12%. PWs can also transmit analogue and digital data with a frequency of up to 19 kHz, which with the addition of a buffer, can drive high current circuits. We have demonstrated that PWs can last approximately two months, a 4 fold increase on previous literature. Protoplasmic tubes can be modified with the addition of conductive or magnetic nano-particles to provide changes in functionality. Conclusion This work has documented novel macro-scale data transmission through biological material; it has advanced the field of bio-electronics by providing a cheap and easy to grow conducting bio-material which may be used in future hybrid electronic technology.
△ Less
Submitted 24 November, 2015;
originally announced November 2015.
-
Security Scheme for Distributed DoS in Mobile Ad Hoc Networks
Authors:
Sugata Sanyal,
Dhaval Gada,
Rajat Gogri,
Punit Rathod,
Zalak Dedhia,
Nirali Mody
Abstract:
In Mobile Ad Hoc Networks (MANET), various types of Denial of Service Attacks (DoS) are possible because of the inherent limitations of its routing protocols. Considering the Ad Hoc On Demand Vector (AODV) routing protocol as the base protocol it is possible to find a suitable solution to over-come the attack of initiating / forwarding fake Route Requests (RREQs) that lead to hogging of network re…
▽ More
In Mobile Ad Hoc Networks (MANET), various types of Denial of Service Attacks (DoS) are possible because of the inherent limitations of its routing protocols. Considering the Ad Hoc On Demand Vector (AODV) routing protocol as the base protocol it is possible to find a suitable solution to over-come the attack of initiating / forwarding fake Route Requests (RREQs) that lead to hogging of network resources and hence denial of service to genuine nodes. In this paper, a proactive scheme is proposed that could prevent a specific kind of DoS attack and identify the misbehaving node. Since the proposed scheme is distributed in nature it has the capability to prevent Distributed DoS (DDoS) as well. The performance of the proposed algorithm in a series of simulations reveal that the proposed scheme provides a better solution than existing approaches with no extra overhead.
△ Less
Submitted 10 May, 2010; v1 submitted 1 May, 2010;
originally announced May 2010.
