Showing 1–47 of 47 results for author: Mondal, B

The neutrino roof: Single-scatter ceilings in dark matter direct detection

Authors: Nirmal Raj, Biprajit Mondal

Abstract: We identify the maximum cross sections probed by single-scatter ``WIMP" searches in dark matter direct detection. Due to Poisson fluctuations in scatter multiplicity, these ceilings scale logarithmically with mass for heavy dark matter and often lie in regions probed by multiscatter searches. Using a generalized formula for single-scatter event rates we recast WIMP searches by the quintal-to-tonne… ▽ More We identify the maximum cross sections probed by single-scatter ``WIMP" searches in dark matter direct detection. Due to Poisson fluctuations in scatter multiplicity, these ceilings scale logarithmically with mass for heavy dark matter and often lie in regions probed by multiscatter searches. Using a generalized formula for single-scatter event rates we recast WIMP searches by the quintal-to-tonne scale detectors XENON1T, XENONnT, LZ, PANDAX-II, PANDAX-4T, DarkSide-50 and DEAP-3600 to obtain ceilings and floors up to a few $10^{17}$ GeV mass and $10^{-22}$ cm$^2$ per-nucleus cross section. We do this for coherent, geometric, isospin-violating xenophobic and argophobic spin-independent scattering, and neutron-only and proton-only spin-dependent scattering. Future large-exposure detectors would register an almost irreducible background of atmospheric neutrinos that would determine a dark matter sensitivity ceiling that we call the ``neutrino roof", in analogy with the well-studied ``neutrino floor". Accounting for this background, we estimate the reaches of the 10$-$100 tonne scale DarkSide-20k, DARWIN/XLZD, PANDAX-xT, and Argo, which would probe many decades of unconstrained parameter space up to the Planck mass, as well as of $10^3-10^4$ tonne scale noble liquid detectors that have been proposed in synergy with neutrino experiments. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: 11 pages revtex4 + references, 3 figures, 1 table

Approximation Schemes for Geometric Knapsack for Packing Spheres and Fat Objects

Authors: Pritam Acharya, Sujoy Bhore, Aaryan Gupta, Arindam Khan, Bratin Mondal, Andreas Wiese

Abstract: We study the geometric knapsack problem in which we are given a set of $d$-dimensional objects (each with associated profits) and the goal is to find the maximum profit subset that can be packed non-overlap**ly into a given $d$-dimensional (unit hypercube) knapsack. Even if $d=2$ and all input objects are disks, this problem is known to be NP-hard [Demaine, Fekete, Lang, 2010]. In this paper, we… ▽ More We study the geometric knapsack problem in which we are given a set of $d$-dimensional objects (each with associated profits) and the goal is to find the maximum profit subset that can be packed non-overlap**ly into a given $d$-dimensional (unit hypercube) knapsack. Even if $d=2$ and all input objects are disks, this problem is known to be NP-hard [Demaine, Fekete, Lang, 2010]. In this paper, we give polynomial-time $(1+\varepsilon)$-approximation algorithms for the following types of input objects in any constant dimension $d$: - disks and hyperspheres, - a class of fat convex polygons that generalizes regular $k$-gons for $k\ge 5$ (formally, polygons with a constant number of edges, whose lengths are in a bounded range, and in which each angle is strictly larger than $π/2$) - arbitrary fat convex objects that are sufficiently small compared to the knapsack. We remark that in our \textsf{PTAS} for disks and hyperspheres, we output the computed set of objects, but for a $O_\varepsilon(1)$ of them we determine their coordinates only up to an exponentially small error. However, it is not clear whether there always exists a $(1+\varepsilon)$-approximate solution that uses only rational coordinates for the disks' centers. We leave this as an open problem which is related to well-studied geometric questions in the realm of circle packing. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Comments: 28 pages, 8 figures

Thiol-amine co-solvents aided direct synthesis of ZnTe thin films by spin coating for low cost optoelectronic applications

Authors: Sheikh Noman Shiddique, Syeda Samiha Nushin, Bipanko Kumar Mondal, Ahnaf Tahmid Abir, Md. Mahbubor Rahman, Mainul Hossain, Jaker Hossain

Abstract: Zinc telluride (ZnTe) thin films have special semiconducting characteristics that make them very promising for a broad range of optoelectronic applications. In this work, a novel approach for synthesizing ZnTe thin films by spin coating technique is followed using a unique solution process with ZnTe directly dissolving in thiol-amine co-solvents. Thin films are synthesized on glass substrates and… ▽ More Zinc telluride (ZnTe) thin films have special semiconducting characteristics that make them very promising for a broad range of optoelectronic applications. In this work, a novel approach for synthesizing ZnTe thin films by spin coating technique is followed using a unique solution process with ZnTe directly dissolving in thiol-amine co-solvents. Thin films are synthesized on glass substrates and air annealed at 250-350 °C. The polycrystalline phase of ZnTe is revealed through the X-ray diffraction (XRD) study. The scanning electron microscopy (SEM) is used to observe the evolution of surface smoothness with annealing temperature. Moreover, elemental compositions of ZnTe thin film have been determined by energy dispersive spectroscopy (EDS) study. FTIR spectroscopy reveals that ZnTe has been successfully synthesized as confirmed by the characteristic peaks in the spectrum of 750-1000 cm-1. Optical properties of the ZnTe thin films have been investigated using UV-vis spectroscopy. The transmittance of the films increases with annealing temperature. Furthermore, the optical bandgaps of the films of 2.92, 2.84, and 2.5 eV have been found at 250, 300, and 350 °C annealing temperatures, respectively. These results suggest that controlling the annealing environment serves as a valuable strategy for tailoring the ZnTe film properties to meet specific application requirements. These results reveal that spin coated ZnTe thin films are attractive ones for various applications in optoelectronic devices such as solar cells and photodetectors. △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: 23 pages, 6 figures, 1 table

On Nijenhuis Lie triple systems

Authors: Shuangjian Guo, Bibhash Mondal, Ripan Saha

Abstract: In this paper, we investigate the mathematical structure of Nijenhuis Lie triple systems, an extension of classical Lie triple systems augmented with the Nijenhuis operator. Our study focuses on the cohomology of Nijenhuis Lie triple systems and demonstrates how abelian extensions of Nijenhuis Lie triple systems are related to cohomology groups. Additionally, we define Nijenhuis Lie triple 2-syste… ▽ More In this paper, we investigate the mathematical structure of Nijenhuis Lie triple systems, an extension of classical Lie triple systems augmented with the Nijenhuis operator. Our study focuses on the cohomology of Nijenhuis Lie triple systems and demonstrates how abelian extensions of Nijenhuis Lie triple systems are related to cohomology groups. Additionally, we define Nijenhuis Lie triple 2-systems and also classify `strict' and `skeletal' Nijenhuis Lie triple 2-systems in terms of crossed modules and the cohomology of Nijenhuis Lie triple systems. △ Less

Submitted 10 March, 2024; originally announced March 2024.

Comments: 20 pages

Determining the nanoflare heating frequency of an X-ray Bright Point observed by MaGIXS

Authors: Biswajit Mondal, P. S. Athiray, Amy R. Winebarger, Sabrina L. Savage, Ken Kobayashi, Stephen Bradshaw, Will Barnes, Patrick R. Champey, Peter Cheimets, Jaroslav Dudik, Leon Golub, Helen E. Mason, David E. McKenzie, Christopher S. Moore, Chad Madsen, Katharine K. Reeves, Paola Testa, Genevieve D. Vigil, Harry P. Warren, Robert W. Walsh, Giulio Del Zanna

Abstract: Nanoflares are thought to be one of the prime candidates that can heat the solar corona to its multi-million kelvin temperature. Individual nanoflares are difficult to detect with the present generation instruments, however their presence can be inferred by comparing simulated nanoflare-heated plasma emissions with the observed emission. Using HYDRAD coronal loop simulations, we model the emission… ▽ More Nanoflares are thought to be one of the prime candidates that can heat the solar corona to its multi-million kelvin temperature. Individual nanoflares are difficult to detect with the present generation instruments, however their presence can be inferred by comparing simulated nanoflare-heated plasma emissions with the observed emission. Using HYDRAD coronal loop simulations, we model the emission from an X-ray bright point (XBP) observed by the Marshall Grazing Incidence X-ray Spectrometer (MaGIXS), along with nearest-available observations from the Atmospheric Imaging Assembly (AIA) onboard Solar Dynamics Observatory (SDO) and X-Ray Telescope (XRT) onboard Hinode observatory. The length and magnetic field strength of the coronal loops are derived from the linear-force-free extrapolation of the observed photospheric magnetogram by Helioseismic and Magnetic Imager (HMI) onboard SDO. Each loop is assumed to be heated by random nanoflares, whose magnitude and frequency are determined by the loop length and magnetic field strength. The simulation results are then compared and matched against the measured intensity from AIA, XRT, and MaGIXS. Our model results indicate the observed emissions from the XBP under study could be well matched by a distribution of nanoflares with average delay times 1500 s to 3000 s, which suggest that the heating is dominated by high-frequency events. Further, we demonstrate the high sensitivity of MaGIXS and XRT to diagnose the heating frequency using this method, while AIA passbands are found to be the least sensitive. △ Less

Submitted 7 February, 2024; originally announced February 2024.

Comments: Accepted for publication in the Astrophysical Journal (ApJ)

Deformation cohomology of morphisms of Lie-Yamaguti algebras

Authors: Bibhash Mondal, Ripan Saha

Abstract: We study cohomology of morphisms of Lie-Yamaguti algebras. As an application, we establish that this cohomology `controls' the formal deformations. Additionally, we demonstrate its connection to the abelian extension of morphisms of Lie-Yamaguti algebras. We study cohomology of morphisms of Lie-Yamaguti algebras. As an application, we establish that this cohomology `controls' the formal deformations. Additionally, we demonstrate its connection to the abelian extension of morphisms of Lie-Yamaguti algebras. △ Less

Submitted 9 December, 2023; originally announced December 2023.

Comments: 22 Pages

[Re] CLRNet: Cross Layer Refinement Network for Lane Detection

Authors: Viswesh N, Kaushal Jadhav, Avi Amalanshu, Bratin Mondal, Sabaris Waran, Om Sadhwani, Apoorv Kumar, Debashish Chakravarty

Abstract: The following work is a reproducibility report for CLRNet: Cross Layer Refinement Network for Lane Detection. The basic code was made available by the author. The paper proposes a novel Cross Layer Refinement Network to utilize both high and low level features for lane detection. The authors assert that the proposed technique sets the new state-of-the-art on three lane-detection benchmarks The following work is a reproducibility report for CLRNet: Cross Layer Refinement Network for Lane Detection. The basic code was made available by the author. The paper proposes a novel Cross Layer Refinement Network to utilize both high and low level features for lane detection. The authors assert that the proposed technique sets the new state-of-the-art on three lane-detection benchmarks △ Less

Submitted 2 October, 2023; originally announced October 2023.

Comments: 17 pages

Multi-wavelength observations of a B-class flare using XSM, AIA, and XRT

Authors: Yamini K. Rao, B. Mondal, Giulio Del Zanna, N. P. S. Mithun, S. V. Vadawale, K. K. Reeves, Helen E. Mason, Anil Bhardwaj

Abstract: We present multi-wavelength observations by Chandrayaan-2/XSM, SDO/AIA and Hinode/XRT of a B-class flare observed on 25th February, 2021, originating from an active region (AR 12804) near the North-West limb. The microflare lasts for approx 30 mins and is composed of hot loops reaching temperatures of 10 MK. We report excellent agreement (within 20 percent) for the average effective temperatures o… ▽ More We present multi-wavelength observations by Chandrayaan-2/XSM, SDO/AIA and Hinode/XRT of a B-class flare observed on 25th February, 2021, originating from an active region (AR 12804) near the North-West limb. The microflare lasts for approx 30 mins and is composed of hot loops reaching temperatures of 10 MK. We report excellent agreement (within 20 percent) for the average effective temperatures obtained at the flare peak from all the three instruments, which have different temperature sensitivities. The XRT filter combination of Be-thin and Be-med provides an excellent opportunity to measure the high-temperatures in such microflare events. The elemental abundances during the evolution of the microflare are also studied and observed to drop towards photospheric values at the flare peak time, compared to coronal values during the rise and decay phase. This is consistent with previous XSM studies. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Comments: 18, pages, 18 figures, ApJ, Accepted

Ab-initio Insights on the Fermiology of $d^1$ Transition metals in Honeycomb lattice : Hierarchy of hop** pathways and spin-orbit coupling

Authors: Manoj Gupta, Basudeb Mondal, Subhro Bhattacharjee, Tanusri Saha Dasgupta

Abstract: Motivated by the intriguing suggestion of realizing SU(8) Dirac semi-metal with $J=3/2$ electrons on a honeycomb lattice, we provide a systematic study of the interplay of various hop** pathways and atomic spin-orbit coupling for the low energy electrons in candidate d$^1$ transition metal halides MX$_3$ (M=Ti, Zr, Hf; X=F, Cl, Br). By combining first principle calculations and minimal hop** H… ▽ More Motivated by the intriguing suggestion of realizing SU(8) Dirac semi-metal with $J=3/2$ electrons on a honeycomb lattice, we provide a systematic study of the interplay of various hop** pathways and atomic spin-orbit coupling for the low energy electrons in candidate d$^1$ transition metal halides MX$_3$ (M=Ti, Zr, Hf; X=F, Cl, Br). By combining first principle calculations and minimal hop** Hamiltonian, we uncover the role of dominant direct metal-metal hop** on top of indirect metal-halide-metal hop**. This sets up a hierarchy of hop** pathways that centrally modify the SU(8) picture for the above materials. These hop** interactions, along with the spin-orbit coupling, lead to a plethora of exactly compensated metals instead of the SU(8) Dirac semi-metal. Remarkably the same can be understood as descendants of a topological insulator obtained by gap** out the SU(8) Dirac semi-metallic phase. The resultant compensated metals have varied Fermi surface topology and are separated by Lifshitz phase transitions. We discuss the implications of the proximate Lifshitz transition, which may be accessed via strain, in the context of the relevant materials. △ Less

Submitted 16 August, 2023; originally announced August 2023.

Comments: 16 pages, 11 figures

Highly efficient CdTe solar cell with a thin CIT current booster: theoretical insights

Authors: Md. Sabbir Hossain, Md. Alamin Hossain pappu, Bipanko Kumar Mondal, Ahnaf Tahmid Abir, Jaker Hossain

Abstract: CdTe-based thin film solar cell has been modeled and enumerated with a thin CuInTe2 (CIT) current booster layer. CdTe-based n-CdS/p-CdTe/p+-CIT/p++-WSe2 heterojunction device has been evaluated for the highest performance. It is revealed that physical parameters such as thickness, do**, and defects of the CIT layer have a significant influence on the performance of the CdTe solar cell. The devic… ▽ More CdTe-based thin film solar cell has been modeled and enumerated with a thin CuInTe2 (CIT) current booster layer. CdTe-based n-CdS/p-CdTe/p+-CIT/p++-WSe2 heterojunction device has been evaluated for the highest performance. It is revealed that physical parameters such as thickness, do**, and defects of the CIT layer have a significant influence on the performance of the CdTe solar cell. The device shows an efficiency of 37.46% with an open circuit voltage, VOC of 1.102 V, short circuit current density, JSC of 38.50 mA/cm2, and fill factor, FF of 88.30%. The use of the photon recycling technique with a Bragg-reflector with 98% back and 95% front reflectance only provides an efficiency of ~44.3% with a current of 45.4 mA/cm2. These findings are very hopeful for the production of an efficient CdTe solar cells in the near future. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Comments: 26 pages, 9 figures, 1 Table

Nijenhuis operators on Leibniz algebras

Authors: Bibhash Mondal, Ripan Saha

Abstract: In this paper, we study Nijenhuis operators on Leibniz algebras. We discuss the relationship of Nijenhuis operators with Rota-Baxter operators and modified Rota-Baxter operators on Leibniz algebras. We define a representation theory of Nijenhuis Leibniz algebras and construct a cohomology theory. Next, we define a one-parameter formal deformation theory of Nijenhuis Leibniz algebras and study infi… ▽ More In this paper, we study Nijenhuis operators on Leibniz algebras. We discuss the relationship of Nijenhuis operators with Rota-Baxter operators and modified Rota-Baxter operators on Leibniz algebras. We define a representation theory of Nijenhuis Leibniz algebras and construct a cohomology theory. Next, we define a one-parameter formal deformation theory of Nijenhuis Leibniz algebras and study infinitesimals, rigidity, and equivalences along the line of Gerstenhaber deformation theory. As an application of our cohomology theory, we show that our cohomology is deformation cohomology and study abelian extensions of such algebras. △ Less

Submitted 10 June, 2023; originally announced June 2023.

Comments: 21 pages. arXiv admin note: text overlap with arXiv:2208.00560

Machine learning for accelerated bandgap prediction in strain-engineered quaternary III-V semiconductors

Authors: Badal Mondal, Julia Westermayr, Ralf Tonner-Zech

Abstract: Quaternary III-V semiconductors are one of the major promising material classes in optoelectronics. The bandgap and its character, direct or indirect, are the most important fundamental properties determining the performance and characteristics of optoelectronic devices. Experimental approaches screening a large range of possible combinations of III- and V-elements with variations in composition a… ▽ More Quaternary III-V semiconductors are one of the major promising material classes in optoelectronics. The bandgap and its character, direct or indirect, are the most important fundamental properties determining the performance and characteristics of optoelectronic devices. Experimental approaches screening a large range of possible combinations of III- and V-elements with variations in composition and strain are impractical for every target application. We present a combination of accurate first-principles calculations and machine learning based approaches to predict the properties of the bandgap for quaternary III-V semiconductors. By learning bandgap magnitudes and their nature at density functional theory accuracy based solely on the composition and strain features of the materials as an input, we develop a computationally efficient yet highly accurate machine learning approach that can be applied to a large number of compositions and strain values. This allows for a computationally efficient prediction of a vast range of materials under different strains, offering the possibility for virtual screening of multinary III-V materials for optoelectronic applications. △ Less

Submitted 28 August, 2023; v1 submitted 5 May, 2023; originally announced May 2023.

Emergent SU(8) Dirac semimetal and novel proximate phases of spin-orbit coupled fermions on a honeycomb lattice

Authors: Basudeb Mondal, Vijay B. Shenoy, Subhro Bhattacharjee

Abstract: Emergent Dirac fermions provide the starting point to understanding the plethora of novel condensed matter phases. The nature of the associated phases and phase transitions crucially depends on both the emergent symmetries as well as the implementation of the microscopic ones on the low-energy Dirac fermions. Here, we show that $j=3/2$ electrons in spin-orbit coupled materials on honeycomb lattice… ▽ More Emergent Dirac fermions provide the starting point to understanding the plethora of novel condensed matter phases. The nature of the associated phases and phase transitions crucially depends on both the emergent symmetries as well as the implementation of the microscopic ones on the low-energy Dirac fermions. Here, we show that $j=3/2$ electrons in spin-orbit coupled materials on honeycomb lattice can give rise to SU(8) symmetric Dirac semimetals with symmetry implementation very different from that of graphene. This non-trivial embedding of the microscopic symmetries in the low energy is reflected in the nature of phases proximate to the Dirac semimetal. Such phases can arise from finite short-range electron-electron interactions. In particular, we identify 24 such phases - divided into three classes - and their low energy properties obtained by condensing particle-number conserving fermion bilinears that break very different microscopic symmetries and/or are topologically protected by symmetries. The latter includes interesting generalisations of quantum spin-Hall phases. Remarkably some of the resultant phases still support a sub-set of gapless fermions - protected by a sub-group of SU(8) - resulting in interesting density wave semimetals. Near the phase transitions to such density wave semimetals, the surviving gapless fermions strongly interact with the bosonic order parameter field and give rise to novel quantum critical points. Our study is applicable to a wide class of $d^1$ and $d^3$ transition metals with strong spin-orbit coupling and predicts that such materials can harbour a very rich interplay of symmetries and competing interactions in the intermediate correlation regime. △ Less

Submitted 2 July, 2023; v1 submitted 14 April, 2023; originally announced April 2023.

Comments: 51 pages, 15 figures, 11 tables

Arbitrary Pattern Formation on a Continuous Circle by Oblivious Robot Swarm

Authors: Brati Mondal, Pritam Goswami, Avisek Sharma, Buddhadeb Sau

Abstract: In the field of distributed system, Arbitrary Pattern Formation (APF) problem is an extensively studied problem. The purpose of APF is to design an algorithm to move a swarm of robots to a particular position on an environment (discrete or continuous) such that the swarm can form a specific but arbitrary pattern given previously to every robot as an input. In this paper the solvability of the APF… ▽ More In the field of distributed system, Arbitrary Pattern Formation (APF) problem is an extensively studied problem. The purpose of APF is to design an algorithm to move a swarm of robots to a particular position on an environment (discrete or continuous) such that the swarm can form a specific but arbitrary pattern given previously to every robot as an input. In this paper the solvability of the APF problem on a continuous circle has been discussed for a swarm of oblivious and silent robots without chirality under a semi synchronous scheduler. Firstly a class of configurations called \textit{Formable Configuration}($FC$) has been provided which is necessary to solve the APF problem on a continuous circle. Then considering the initial configuration to be an $FC$, an deterministic and distributed algorithm has been provided that solves the APF problem for $n$ robots on a continuous circle of fixed radius within $O(n)$ epochs without collision. △ Less

Submitted 14 July, 2023; v1 submitted 18 March, 2023; originally announced March 2023.

Accurate first-principle bandgap predictions in strain-engineered ternary III-V semiconductors

Authors: Badal Mondal, Marcel Kröner, Thilo Hepp, Kerstin Volz, Ralf Tonner-Zech

Abstract: Tuning the bandgap in ternary III-V semiconductors via modification of the composition or the strain in the material is a major approach for the design of optoelectronic materials. Experimental approaches screening a large range of possible target structures are hampered by the tremendous effort to optimize the material synthesis for every target structure. We present an approach based on density… ▽ More Tuning the bandgap in ternary III-V semiconductors via modification of the composition or the strain in the material is a major approach for the design of optoelectronic materials. Experimental approaches screening a large range of possible target structures are hampered by the tremendous effort to optimize the material synthesis for every target structure. We present an approach based on density functional theory efficiently capable of providing the bandgap as a function of composition and strain. Using a specific density functional designed for accurate bandgap computation (TB09) together with a band unfolding procedure and special quasirandom structures, we develop a computational protocol efficiently able to predict bandgaps. The approach's accuracy is validated by comparison to selected experimental data. We thus map the phase space of composition and strain (we call this the ``bandgap phase diagram'') for several important III-V compound semiconductors: GaAsP, GaAsN, GaPSb, GaAsSb, GaPBi, and GaAsBi. We show the application of these diagrams for identifying the most promising materials for device design. Furthermore, our computational protocol can easily be generalized to explore the vast chemical space of III-V materials with all other possible combinations of III- and V-elements. △ Less

Submitted 26 June, 2023; v1 submitted 28 February, 2023; originally announced February 2023.

Comments: 13 pages, 7 figures, GitHub (https://bmondal94.github.io/Bandgap-Phase-Diagram/)

Coronal Elemental Abundances during A-class Solar Flares Observed by Chandrayaan-2 XSM

Authors: Lakshitha Nama, Biswajit Mondal, S Narendranath, KT Paul

Abstract: The abundances of low First Ionisation Potential (FIP) elements are three to four times higher (FIP bias) in the closed loop active corona than in the photosphere, known as the FIP effect. Observations suggest that the abundances vary in different coronal structures. Here, we use the soft X-ray spectroscopic measurements from the Solar X-ray Monitor (XSM) on board the Chandrayaan-2 orbiter to stud… ▽ More The abundances of low First Ionisation Potential (FIP) elements are three to four times higher (FIP bias) in the closed loop active corona than in the photosphere, known as the FIP effect. Observations suggest that the abundances vary in different coronal structures. Here, we use the soft X-ray spectroscopic measurements from the Solar X-ray Monitor (XSM) on board the Chandrayaan-2 orbiter to study the FIP effect in multiple A-class flares observed during the minimum of solar cycle 24. Using time-integrated spectral analysis, we derive the average temperature, emission measure, and the abundances of four elements - Mg, Al, Si, and S. We find that the temperature and emission measure scales with the flares sub-class while the measured abundances show an intermediate FIP bias for the lower A-flares (e.g., A1), while for the higher A-flares, the FIP bias is near unity. To investigate it further, we perform a time-resolved spectral analysis for a sample of the A-class flares and examine the evolution of temperature, emission measure, and abundances. We find that the abundances drop from the coronal values towards their photospheric values in the impulsive phase of the flares, and after the impulsive phase, they quickly return to the usual coronal values. The transition of the abundances from the coronal to photospheric values in the impulsive phase of the flares indicates the injection of fresh unfractionated material from the lower solar atmosphere to the corona due to chromospheric evaporation. However, explaining the quick recovery of the abundances from the photospheric to coronal values in the decay phase of the flare is challenging. △ Less

Submitted 23 February, 2023; originally announced February 2023.

Comments: Accepted for publication in 'Solar Physics'

Exploring the potential of GeTe for the application in Thermophotovoltaic (TPV) cell

Authors: Ahnaf Tahmid Abir, Bipanko Kumar Mondal, Jaker Hossain

Abstract: Germanium telluride (GeTe) having a direct bandgap of 0.6 eV has mainly been in phase change memory and thermoelectric power generation. In this article, we study the electronic structure of the GeTe by first-principles calculations. The theoretical direct bandgap of GeTe was found to be 0.69 eV which is very close to the experimental value. Then, we demonstrate a single-junction GeTe thermophotov… ▽ More Germanium telluride (GeTe) having a direct bandgap of 0.6 eV has mainly been in phase change memory and thermoelectric power generation. In this article, we study the electronic structure of the GeTe by first-principles calculations. The theoretical direct bandgap of GeTe was found to be 0.69 eV which is very close to the experimental value. Then, we demonstrate a single-junction GeTe thermophotovoltaic (TPV) cell based on device transport model with np structure. The device was optimized for the higher performance of the TPV cell. The GeTe TPV cell exhibited an efficiency of 7.9% with JSC=16.16 A/cm2, VOC=0.360 V and FF=75.51%, respectively. These results indicate that GeTe could be a promising material for the fabrication of efficient TPV cell. △ Less

Submitted 21 January, 2023; originally announced January 2023.

Comments: 32 pages, 9 figures

Evolution of elemental abundances in hot active region cores from Chandrayaan-2 XSM observations

Authors: Biswajit Mondal, Santosh V. Vadawale, Giulio Del Zanna, N. P. S. Mithun, Aveek Sarkar, Helen E. Mason, P. Janardhan, Anil Bhardwaj

Abstract: The First Ionization Potential (FIP) bias, whereby elemental abundances for low FIP elements in different coronal structures vary from their photospheric values and may also vary with time, has been widely studied. In order to study the temporal variation, and to understand the physical mechanisms giving rise to the FIP bias, we have investigated the hot cores of three ARs using disk-integrated so… ▽ More The First Ionization Potential (FIP) bias, whereby elemental abundances for low FIP elements in different coronal structures vary from their photospheric values and may also vary with time, has been widely studied. In order to study the temporal variation, and to understand the physical mechanisms giving rise to the FIP bias, we have investigated the hot cores of three ARs using disk-integrated soft X-ray spectroscopic observation with the Solar X-ray Monitor (XSM) onboard Chandrayaan-2. Observations for periods when only one AR was present on the solar disk were used so as to ensure that the AR was the principal contributor to the total X-ray intensity. The average values of temperature and EM were ~3 MK and 3.0E46/cm3 respectively. Regardless of the age and activity of the AR, the elemental abundances of the low FIP elements, Al, Mg, and Si were consistently higher than their photospheric values. The average FIP bias for Mg and Si was ~3, whereas the FIP bias for the mid-FIP element, S, was ~1.5. However, the FIP bias for the lowest FIP element, Al, was observed to be higher than 3, which, if real, suggests a dependence of the FIP bias of low FIP elements on their FIP value. Another major result from our analysis is that the FIP bias of these elements is established in within ~10 hours of emergence of the AR and then remains almost constant throughout its lifetime. △ Less

Submitted 6 June, 2023; v1 submitted 9 January, 2023; originally announced January 2023.

Comments: Accepted for publication in the Astrophysical Journal, 16 pages,8 figures

Role of small-scale impulsive events in heating the X-ray bright points of the quiet Sun

Authors: Biswajit Mondal, James A Klimchuk, Santosh V. Vadawale, Aveek Sarkar, Giulio Del Zanna, P. S. Athiray, N. P. S. Mithun, Helen E. Mason, A. Bhardwaj

Abstract: Small-scale impulsive events, known as nanoflares, are thought to be one of the prime candidates that can keep the solar corona hot at its multi-million Kelvin temperature. Individual nanoflares are difficult to detect with the current generation instruments; however, their presence can be inferred through indirect techniques such as a Differential Emission Measure (DEM) analysis. Here we employ t… ▽ More Small-scale impulsive events, known as nanoflares, are thought to be one of the prime candidates that can keep the solar corona hot at its multi-million Kelvin temperature. Individual nanoflares are difficult to detect with the current generation instruments; however, their presence can be inferred through indirect techniques such as a Differential Emission Measure (DEM) analysis. Here we employ this technique to investigate the possibility of nanoflare heating of the quiet corona during the minimum of solar cycle 24. During this minimum, active regions (ARs) were absent on the solar-disk for extended periods. In the absence of ARs, X-ray bright points (XBP) are the dominant contributor to disk-integrated X-rays. We estimate the DEM of the XBPs using observations from the Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 orbiter and the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamic Observatory. XBPs consist of small-scale loops associated with bipolar magnetic fields. We simulate such XBP loops using the EBTEL hydrodynamic code. The lengths and magnetic field strengths of these loops are obtained through a potential field extrapolation of the photospheric magnetogram. Each loop is assumed to be heated by random nanoflares having an energy that depends on the loop properties. The composite nanoflare energy distribution for all the loops has a power-law slope close to -2.5. The simulation output is then used to obtain the integrated DEM. It agrees remarkably well with the observed DEM at temperatures above 1 MK, suggesting that the nanoflare distribution, as predicted by our model, can explain the XBP heating. △ Less

Submitted 6 January, 2023; originally announced January 2023.

Comments: Submitted in the Astrophysical Journal, 20 pages, 10 figures

Cohomology of modified Rota-Baxter Leibniz algebra of weight $λ$

Authors: Bibhash Mondal, Ripan Saha

Abstract: Rota-Baxter operators have been paid much attention in the last few decades as they have many applications in mathematics and physics. In this paper, our object of study is modified Rota-Baxter operators on Leibniz algebras. We investigate modified Rota-Baxter Leibniz algebras from the cohomological point of view. We study a one-parameter formal deformation theory of modified Rota-Baxter Leibniz a… ▽ More Rota-Baxter operators have been paid much attention in the last few decades as they have many applications in mathematics and physics. In this paper, our object of study is modified Rota-Baxter operators on Leibniz algebras. We investigate modified Rota-Baxter Leibniz algebras from the cohomological point of view. We study a one-parameter formal deformation theory of modified Rota-Baxter Leibniz algebras and define the associated deformation cohomology that controls the deformation. Finally, as an application, we characterize equivalence classes of abelian extensions in terms of second cohomology groups. △ Less

Submitted 22 November, 2023; v1 submitted 15 November, 2022; originally announced November 2022.

Comments: 20 pages

Soft X-ray Spectral Diagnostics of Multi-thermal Plasma in Solar Flares with Chandrayaan-2 XSM

Authors: N. P. S. Mithun, Santosh V. Vadawale, Giulio Del Zanna, Yamini K. Rao, Bhuwan Joshi, Aveek Sarkar, Biswajit Mondal, P. Janardhan, Anil Bhardwaj, Helen E. Mason

Abstract: Spectroscopic observations in X-ray wavelengths provide excellent diagnostics of the temperature distribution in solar flare plasma. The Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 mission provides broad-band disk integrated soft X-ray solar spectral measurements in the energy range of 1-15 keV with high spectral resolution and time cadence. In this study, we analyse X-ray spectra of three… ▽ More Spectroscopic observations in X-ray wavelengths provide excellent diagnostics of the temperature distribution in solar flare plasma. The Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 mission provides broad-band disk integrated soft X-ray solar spectral measurements in the energy range of 1-15 keV with high spectral resolution and time cadence. In this study, we analyse X-ray spectra of three representative GOES C-class flares obtained with the XSM to investigate the evolution of various plasma parameters during the course of the flares. Using the soft X-ray spectra consisting of the continuum and well-resolved line complexes of major elements like Mg, Si, and Fe, we investigate the validity of the isothermal and multi-thermal assumptions on the high temperature components of the flaring plasma. We show that the soft X-ray spectra during the impulsive phase of the high intensity flares are inconsistent with isothermal models and are best fitted with double peaked differential emission measure distributions where the temperature of the hotter component rises faster than that of the cooler component. The two distinct temperature components observed in DEM models during the impulsive phase of the flares suggest the presence of the directly heated plasma in the corona and evaporated plasma from the chromospheric footpoints. We also find that the abundances of low FIP elements Mg, Si, and Fe reduces from near coronal to near photospheric values during the rising phase of the flare and recovers back to coronal values during decay phase, which is also consistent with the chromospheric evaporation scenario. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Comments: Accepted for publication in ApJ

Systematic strain-induced bandgap tuning in binary III-V semiconductors from density functional theory

Authors: Badal Mondal, Ralf Tonner-Zech

Abstract: The modification of the nature and size of bandgaps for III-V semiconductors is of strong interest for optoelectronic applications. Strain can be used to systematically tune the bandgap over a wide range of values and induce indirect-to-direct (IDT), direct-to-indirect (DIT), and other changes in bandgap nature. Here, we establish a predictive ab initio approach, based on density functional theory… ▽ More The modification of the nature and size of bandgaps for III-V semiconductors is of strong interest for optoelectronic applications. Strain can be used to systematically tune the bandgap over a wide range of values and induce indirect-to-direct (IDT), direct-to-indirect (DIT), and other changes in bandgap nature. Here, we establish a predictive ab initio approach, based on density functional theory, to analyze the effect of uniaxial, biaxial, and isotropic strain on the bandgap. We show that systematic variation is possible. For GaAs, DITs were observed at 1.52% isotropic compressive strain and 3.52% tensile strain, while for GaP an IDT was found at 2.63% isotropic tensile strain. We additionally propose a strategy for the realization of direct-indirect transition by combining biaxial strain with uniaxial strain. Further transition points were identified for strained GaSb, InP, InAs, and InSb and compared to the elemental semiconductor silicon. Our analyses thus provide a systematic and predictive approach to strain-induced bandgap tuning in binary III-V semiconductors. △ Less

Submitted 22 August, 2022; originally announced August 2022.

Numerical modeling of CuSbSe2-based dual-heterojunction thin film solar cell with CGS back surface layer

Authors: Bipin Saha, Bipanko Kumar Mondal, Shaikh Khaled Mostaque, Mainul Hossain, Jaker Hossain

Abstract: Ternary chalcostibite copper antimony selenide (CuSbSe2) is a promising absorber material for next generation thin film solar cells due to the non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap and high optical absorption coefficient of CuSbSe2. Conventional single heterojunction CuSbSe2 solar cells suffer from high recombination rate at the interfaces and the prese… ▽ More Ternary chalcostibite copper antimony selenide (CuSbSe2) is a promising absorber material for next generation thin film solar cells due to the non-toxic nature, earth-abundance, low-cost fabrication technique, optimum bandgap and high optical absorption coefficient of CuSbSe2. Conventional single heterojunction CuSbSe2 solar cells suffer from high recombination rate at the interfaces and the presence of a Schottky barrier at the back contact, which limit their power conversion efficiencies (PCEs). In this study, we propose a dual-heterojunction n-ZnSe/p-CuSbSe2/p+-CGS solar cell, having copper gallium selenide (CGS) as the back surface field (BSF) layer. The BSF layer absorbs longer wavelength photons through a tail-states-assisted (TSA) two-step upconversion process, leading to enhanced conversion efficiency. Numerical simulations were carried out using SCAPS-1D to investigate the performance of the proposed solar cell with respect to absorber layer thickness, do** concentrations and defect densities. The simulation results exhibit PCE as high as 43.77% for the dual-heterojunction solar cell as compared to 27.74% for the single heterojunction n-ZnSe/p-CuSbSe2 counterpart. The dual-heterojunction structure has, therefore, the potential to approach the Shockley-Queisser (SQ) detailed balance limit and can lead to extremely high PCEs in emerging thin film solar cells. △ Less

Submitted 18 August, 2022; originally announced August 2022.

Comments: 21 pages, 7 figures, 2 tables

Cohomology, deformations and extensions of Rota-Baxter Leibniz algebras

Authors: Bibhash Mondal, Ripan Saha

Abstract: A Rota-Baxter Leibniz algebra is a Leibniz algebra $(\mathfrak{g},[~,~]_{\mathfrak{g}})$ equipped with a Rota-Baxter operator $T : \mathfrak{g} \rightarrow \mathfrak{g}$. We define representation and dual representation of Rota-Baxter Leibniz algebras. Next, we define a cohomology theory of Rota-Baxter Leibniz algebras. We also study the infinitesimal and formal deformation theory of Rota-Baxter L… ▽ More A Rota-Baxter Leibniz algebra is a Leibniz algebra $(\mathfrak{g},[~,~]_{\mathfrak{g}})$ equipped with a Rota-Baxter operator $T : \mathfrak{g} \rightarrow \mathfrak{g}$. We define representation and dual representation of Rota-Baxter Leibniz algebras. Next, we define a cohomology theory of Rota-Baxter Leibniz algebras. We also study the infinitesimal and formal deformation theory of Rota-Baxter Leibniz algebras and show that our cohomology is deformation cohomology. Moreover, We define an abelian extension of Rota-Baxter Leibniz algebras and show that equivalence classes of such extensions are related to the cohomology groups. △ Less

Submitted 23 January, 2023; v1 submitted 31 July, 2022; originally announced August 2022.

Comments: 25 Pages

Journal ref: Communications in Mathematics, Volume 30 (2022), Issue 2 (Special Issue: CIMPA School "Nonassociative Algebras and Its Applications", Madagascar 2021) (January 24, 2023) cm:10295

Multi-wavelength observations by XSM, Hinode and SDO of an active region. Chemical abundances and temperatures

Authors: G. Del Zanna, B. Mondal, Y. K. Rao, N. P. S. Mithun, S. V. Vadawale, K. K. Reeves, H. E. Mason, A. Sarkar, P. Janardhan, A. Bhardwaj

Abstract: We have reviewed the first year of observations of the Solar X-ray Monitor (XSM) onboard Chandrayaan-2, and the available multi-wavelength observations to complement the XSM data, focusing on Solar Dynamics Observatory AIA and Hinode XRT, EIS observations. XSM has provided disk-integrated solar spectra in the 1--15 keV energy range, observing a large number of microflares. We present an analysis o… ▽ More We have reviewed the first year of observations of the Solar X-ray Monitor (XSM) onboard Chandrayaan-2, and the available multi-wavelength observations to complement the XSM data, focusing on Solar Dynamics Observatory AIA and Hinode XRT, EIS observations. XSM has provided disk-integrated solar spectra in the 1--15 keV energy range, observing a large number of microflares. We present an analysis of multi-wavelength observations of AR 12759 during its disk crossing. We use a new radiometric calibration of EIS to find that the quiescent AR core emission during its disk crossing has a distribution of temperatures and chemical abundances that does not change significantly over time. An analysis of the XSM spectra confirms the EIS results, and shows that the low First Ionization Potential (FIP) elements are enhanced, compared to their photospheric values. The frequent microflares produced by the AR did not affect the abundances of the quiescent AR core. We also present an analysis of one of the flares it produced, SOL2020-04-09T09:32. The XSM analysis indicates isothermal temperatures reaching 6 MK. The lack of very high-T emission is confirmed by AIA. We find excellent agreement between the observed XSM spectrum and the one predicted using an AIA DEM analysis. In contrast, the XRT Al-Poly / Be-thin filter ratio gives lower temperatures for the quiescent and flaring phases. We show that this is due to the sensitivity of this ratio to low temperatures, as the XRT filter ratios predicted with a DEM analysis based on EIS and AIA gives values in good agreement with the observed ones. △ Less

Submitted 14 July, 2022; originally announced July 2022.

Comments: accepted for publication

Single Particle Configurations of the Excited States of $^{203}$Po

Authors: S. Chatterjee, A. Ghosh, D. Arora, S. Das, B. Mondal, S. Samanta, R. Raut, S. S. Ghugre, P. C. Srivastava, A. K. Sinha, U. Garg, H. K. Singh, Neelam, K. Rojeeta Devi, A. Sharma, S. S. Bhattacharjee, R. Garg, I. Bala, R. P. Singh, S. Muralithar

Abstract: Excited states of the $^{203}$Po ($Z = 84, N = 119$) have been investigated after populating them through $^{194}$Pt($^{13}$C,4n) fusion-evaporation reaction at E$_{beam}$ = 74 MeV and using a large array of Compton suppressed HPGe clover detectors as the detection setup for the emitted $γ$-rays. Standard techniques of $γ$-ray spectroscopy have been applied towards establishing the level structure… ▽ More Excited states of the $^{203}$Po ($Z = 84, N = 119$) have been investigated after populating them through $^{194}$Pt($^{13}$C,4n) fusion-evaporation reaction at E$_{beam}$ = 74 MeV and using a large array of Compton suppressed HPGe clover detectors as the detection setup for the emitted $γ$-rays. Standard techniques of $γ$-ray spectroscopy have been applied towards establishing the level structure of the nucleus. Twenty new $γ$-ray transitions have been identified therein, through $γ-γ$ coincidence measurements, and spin-parity assignments of several states have been determined or confirmed, following the angular correlation and linear polarization measurements on the observed $γ$-rays. The excited states have been interpreted in the framework of large basis shell model calculations, while comparing their calculated and experimental energies. They have been principally ascribed to proton population in the $h_{9/2}$ and $i_{13/2}$ orbitals outside the $Z = 82$ closure and neutron occupation of the $f_{5/2}$, $p_{3/2}$ and $i_{13/2}$ orbitals in the $N = 126$ shell. △ Less

Submitted 4 July, 2022; originally announced July 2022.

On equivariant Lie-Yamaguti algebras and related structures

Authors: Shuangjian Guo, Bibhash Mondal, Ripan Saha

Abstract: In this paper, we first discuss cohomology and a one-parameter formal deformation theory of Lie-Yamaguti algebras. Next, we study finite group actions on Lie-Yamaguti algebras and introduce equivariant cohomology for Lie-Yamaguti algebras equipped with group actions. Finally, we study an equivariant one-parameter formal deformation theory and show that our equivariant cohomology is the suitable de… ▽ More In this paper, we first discuss cohomology and a one-parameter formal deformation theory of Lie-Yamaguti algebras. Next, we study finite group actions on Lie-Yamaguti algebras and introduce equivariant cohomology for Lie-Yamaguti algebras equipped with group actions. Finally, we study an equivariant one-parameter formal deformation theory and show that our equivariant cohomology is the suitable deformation cohomology. △ Less

Submitted 13 February, 2022; originally announced February 2022.

Comments: 16 pages. arXiv admin note: text overlap with arXiv:1911.09854

A comprehensive first principles calculations on (Ba0.82K0.18)(Bi0.53Pb0.47)O3 single-cubic-perovskite superconductor

Authors: Mirza H. K. Rubel, Sujon Kumar Mitro, Khandaker Monower Hossain, Md. Mijanur Rahaman, M. Khalid Hossain, Jaker Hossain, B. K. Mondal, Istiak Ahmed, A. K. M. A. Islam, A. El-Denglawey

Abstract: In this present study, the pseudopotential plane-wave (PP-PW) pathway in the scheme of density functional theory (DFT) is utilized to investigate the various physical properties on (Ba0.82K0.18)(Bi0.53Pb0.47)O3 (BKBPO) single perovskite superconductor. We have analyzed elastic constants and moduli at zero and elevated pressures (up to 25 GPa) as well. We also have investigated the anisotropic natu… ▽ More In this present study, the pseudopotential plane-wave (PP-PW) pathway in the scheme of density functional theory (DFT) is utilized to investigate the various physical properties on (Ba0.82K0.18)(Bi0.53Pb0.47)O3 (BKBPO) single perovskite superconductor. We have analyzed elastic constants and moduli at zero and elevated pressures (up to 25 GPa) as well. We also have investigated the anisotropic nature incorporating both the theoretical indices and graphical representations in 2D and 3D dimensions, which reveals a high level of anisotropy. The flatness of the energy bands near EF is a sign of Van-Hf singularity that might increase the electron pairing and origination of high-TC superconductivity. The computed band structure exhibits its metallic characteristics is confirmed by band overlap**. A band of DOS is formed for the strong hybridization of the constituent elements. The orbital electrons of O-2p contribute most dominantly at EF in contrast to all orbital electrons. The orbital electrons at the EF are higher from both the partial density of states and charge density map** investigation. The coexistence of the electron and hole-like Fermi sheets exhibits the multi-band nature of BKBPO. On the other hand, Fermi surfaces with flat faces promote transport features and Fermi surface nesting as well. The calculated value of the electron-phonon coupling constant (λ = 1.46) is slightly lower than the isostructural superconductor, which indicates that the studied BKBPO can be treated as a strongly coupled superconductor similar to the reported isostructural perovskite superconductors. Furthermore, the thermodynamic properties have been evaluated and analyzed at elevated temperature and pressure by using harmonic Debye approximation (QHDA). △ Less

Submitted 7 December, 2021; originally announced December 2021.

Comments: 20 pages, 7 figures, 6 tables

Journal ref: Materials Today Communications, 33 (2022) 104302

Theoretical insight into the enhancement of longer-wavelength light absorption in silicon solar cell with multilevel impurities

Authors: Shaikh Khaled Mostaque, Bipanko Kumar Mondal, Jaker Hossain

Abstract: In this article, we theoretically demonstrate multilevel impurity photovoltaic effect in an efficient silicon dual-homojunction solar cell that ensures an extended absorption of longer wavelength light. Along with suitable contact work functions (Ni and Ta as anode and cathode, respectively), three impurity energy levels from acceptor type impurities (One from Tl and two from Zn) have been introdu… ▽ More In this article, we theoretically demonstrate multilevel impurity photovoltaic effect in an efficient silicon dual-homojunction solar cell that ensures an extended absorption of longer wavelength light. Along with suitable contact work functions (Ni and Ta as anode and cathode, respectively), three impurity energy levels from acceptor type impurities (One from Tl and two from Zn) have been introduced in the energy gap of the absorber layer in the solar cell. The pristine Si solar cell shows a PCE of 25.4% with JSC= 37.99 mA/cm2, VOC=0.780V and FF=85.76%, respectively. The incorporation of Tl impurity level alone provides a PCE of 33.4%, with JSC= 51.56 mA/cm2, VOC=0.789 V and FF=82.03%, respectively. The PCE of the solar cell further enhances to 35.4% with a further enhancement of the short circuit current by 3.76 mA/cm2 due to the inclusion of Zn impurity into the optimized structure. This enhancement of the JSC and hence PCE is resulted from the longer wavelength light absorption due to impurity-assisted two-step photon upconversion in the solar cell. △ Less

Submitted 9 September, 2021; originally announced September 2021.

Comments: 30 pages, 11 figures, 1 table

A distillation based approach for the diagnosis of diseases

Authors: Hmrishav Bandyopadhyay, Shuvayan Ghosh Dastidar, Bisakh Mondal, Biplab Banerjee, Nibaran Das

Abstract: Presently, Covid-19 is a serious threat to the world at large. Efforts are being made to reduce disease screening times and in the development of a vaccine to resist this disease, even as thousands succumb to it everyday. We propose a novel method of automated screening of diseases like Covid-19 and pneumonia from Chest X-Ray images with the help of Computer Vision. Unlike computer vision classifi… ▽ More Presently, Covid-19 is a serious threat to the world at large. Efforts are being made to reduce disease screening times and in the development of a vaccine to resist this disease, even as thousands succumb to it everyday. We propose a novel method of automated screening of diseases like Covid-19 and pneumonia from Chest X-Ray images with the help of Computer Vision. Unlike computer vision classification algorithms which come with heavy computational costs, we propose a knowledge distillation based approach which allows us to bring down the model depth, while preserving the accuracy. We make use of an augmentation of the standard distillation module with an auxiliary intermediate assistant network that aids in the continuity of the flow of information. Following this approach, we are able to build an extremely light student network, consisting of just 3 convolutional blocks without any compromise on accuracy. We thus propose a method of classification of diseases which can not only lead to faster screening, but can also operate seamlessly on low-end devices. △ Less

Submitted 7 August, 2021; originally announced August 2021.

Evolution of Elemental Abundances During B-Class Solar Flares: Soft X-ray Spectral Measurements with Chandrayaan-2 XSM

Authors: Biswajit Mondal, Aveek Sarkar, Santosh V. Vadawale, N. P. S. Mithun, P. Janardhan, Giulio Del Zanna, Helen E. Mason, Urmila Mitra-Kraev, S. Narendranath

Abstract: The Solar X-ray Spectrometer (XSM) payload onboard Chandrayaan-2 provides disk-integrated solar spectra in the 1-15 keV energy range with an energy resolution of 180 eV (at 5.9 keV) and a cadence of 1~second. During the period from September 2019 to May 2020, covering the minimum of Solar Cycle 24, it observed nine B-class flares ranging from B1.3 to B4.5. Using time-resolved spectroscopic analysi… ▽ More The Solar X-ray Spectrometer (XSM) payload onboard Chandrayaan-2 provides disk-integrated solar spectra in the 1-15 keV energy range with an energy resolution of 180 eV (at 5.9 keV) and a cadence of 1~second. During the period from September 2019 to May 2020, covering the minimum of Solar Cycle 24, it observed nine B-class flares ranging from B1.3 to B4.5. Using time-resolved spectroscopic analysis during these flares, we examined the evolution of temperature, emission measure, and absolute elemental abundances of four elements -- Mg, Al, Si, and S. These are the first measurements of absolute abundances during such small flares and this study offers a unique insight into the evolution of absolute abundances as the flares evolve. Our results demonstrate that the abundances of these four elements decrease towards their photospheric values during the peak phase of the flares. During the decay phase, the abundances are observed to quickly return to their pre-flare coronal values. The depletion of elemental abundances during the flares is consistent with the standard flare model, suggesting the injection of fresh material into coronal loops as a result of chromospheric evaporation. To explain the quick recovery of the so-called coronal "First Ionization Potential (FIP) bias" we propose two scenarios based on the Ponderomotive force model. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Comments: Accepted for publication in the Astrophysical Journal, 19 pages, 12 figures

Observations of the Quiet Sun During the Deepest Solar Minimum of the Past Century with Chandrayaan-2 XSM -- Sub-A Class Microflares Outside Active Regions

Authors: Santosh V. Vadawale, N. P. S. Mithun, Biswajit Mondal, Aveek Sarkar, P. Janardhan, Bhuwan Joshi, Anil Bhardwaj, M. Shanmugam, Arpit R. Patel, Hitesh Kumar L. Adalja, Shiv Kumar Goyal, Tinkal Ladiya, Neeraj Kumar Tiwari, Nishant Singh, Sushil Kumar

Abstract: Solar flares, with energies ranging over several orders of magnitude, result from impulsive release of energy due to magnetic reconnection in the corona. Barring a handful, almost all microflares observed in X-rays are associated with the solar active regions. Here we present, for the first time, a comprehensive analysis of a large sample of quiet Sun microflares observed in soft X-rays by the Sol… ▽ More Solar flares, with energies ranging over several orders of magnitude, result from impulsive release of energy due to magnetic reconnection in the corona. Barring a handful, almost all microflares observed in X-rays are associated with the solar active regions. Here we present, for the first time, a comprehensive analysis of a large sample of quiet Sun microflares observed in soft X-rays by the Solar X-ray Monitor (XSM) on board the Chandrayaan-2 mission during the 2019-20 solar minimum. A total of 98 microflares having peak flux below GOES A-level were observed by the XSM during observations spanning 76 days. By using the derived plasma temperature and emission measure of these events obtained by fitting the XSM spectra along with volume estimates from concurrent imaging observations in EUV with the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA), we estimated their thermal energies to be ranging from 3e26 to 6e27 erg. We present the frequency distribution of the quiet Sun microflares with energy and discuss the implications of these observations of small-scale magnetic reconnection events outside active regions on coronal heating. △ Less

Submitted 30 March, 2021; originally announced March 2021.

Comments: Accepted for publication in ApJL; 13 pages, 5 figures; All figures of figure set 3 available in the tar file

Journal ref: ApJL 912 L13, 2021

Observations of the Quiet Sun During the Deepest Solar Minimum of the Past Century with Chandrayaan-2 XSM -- Elemental Abundances in the Quiescent Corona

Authors: Santosh V. Vadawale, Biswajit Mondal, N. P. S. Mithun, Aveek Sarkar, P. Janardhan, Bhuwan Joshi, Anil Bhardwaj, M. Shanmugam, Arpit R. Patel, Hitesh Kumar L. Adalja, Shiv Kumar Goyal, Tinkal Ladiya, Neeraj Kumar Tiwari, Nishant Singh, Sushil Kumar

Abstract: Elements with low First Ionization Potential (FIP) are known to be three to four times more abundant in active region loops of the solar corona than in the photosphere. There have been observations suggesting that this observed "FIP bias" may be different in other parts of the solar corona and such observations are thus important in understanding the underlying mechanism. The Solar X-ray Monitor (… ▽ More Elements with low First Ionization Potential (FIP) are known to be three to four times more abundant in active region loops of the solar corona than in the photosphere. There have been observations suggesting that this observed "FIP bias" may be different in other parts of the solar corona and such observations are thus important in understanding the underlying mechanism. The Solar X-ray Monitor (XSM) on board the Chandrayaan-2 mission carried out spectroscopic observations of the Sun in soft X-rays during the 2019-20 solar minimum, considered to be the quietest solar minimum of the past century. These observations provided a unique opportunity to study soft X-ray spectra of the quiescent solar corona in the absence of any active regions. By modelling high resolution broadband X-ray spectra from XSM, we estimate the temperature and emission measure during periods of possibly the lowest solar X-ray intensity. We find that the derived parameters remain nearly constant over time with a temperature around 2 MK, suggesting the emission is dominated by X-ray Bright Points (XBPs). We also obtain the abundances of Mg, Al, and Si relative to H, and find that the FIP bias is ~2, lower than the values observed in active regions. △ Less

Submitted 30 March, 2021; originally announced March 2021.

Comments: Accepted for publication in ApJL; 10 pages, 5 figures; All figures of figure set 5 available in the tar file

Journal ref: ApJL 912 L12, 2021

Simulation approach to reach the SQ limit in CIGS-based dual-heterojunction solar cell

Authors: Shaikh Khaled Mostaque, Bipanko Kumar Mondal, Jaker Hossain

Abstract: In this article, we demonstrate the design and simulation of a highly-efficient n-CdS/p-CIGS/p+-CGS dual heterojunction solar cell. The simulation was performed using SCAPS-1D software with reported experimental physical parameters. The simulation performance of our proposed design arises 47% with Voc=0.98 V, Jsc=59.94 mA/cm2 and FF=80.07%, respectively. The high short circuit current and hence th… ▽ More In this article, we demonstrate the design and simulation of a highly-efficient n-CdS/p-CIGS/p+-CGS dual heterojunction solar cell. The simulation was performed using SCAPS-1D software with reported experimental physical parameters. The simulation performance of our proposed design arises 47% with Voc=0.98 V, Jsc=59.94 mA/cm2 and FF=80.07%, respectively. The high short circuit current and hence the high efficiency is predominantly originated from the longer wavelength absorption of photon through a tail-states-assisted two-step upconversion in dual heterojunction (DH) and thus reaches the SQ detailed balance limit of DH solar cell. △ Less

Submitted 16 March, 2021; originally announced March 2021.

Comments: 21 pages, 6 figures

DarpanX: A Python Package for Modeling X-ray Reflectivity of Multilayer Mirrors

Authors: Biswajit Mondal, Santosh V. Vadawale, N. P. S. Mithun, C. S. Vaishnava, Neeraj K. Tiwari, S. K. Goyal, Singam S. Panini, Vinita Navalkar, Chiranjit Karmakar, Mansukhlal R. Patel, R. B. Upadhyay

Abstract: Multilayer X-ray mirrors consist of a coating of a large number of alternate layers of high Z and low Z materials with a typical thickness of 10-100 Angstrom, on a suitable substrate. Such coatings play an important role in enhancing the reflectivity of X-ray mirrors by allowing reflections at angles much larger than the critical angle of X-ray reflection for the given materials. Coating with an e… ▽ More Multilayer X-ray mirrors consist of a coating of a large number of alternate layers of high Z and low Z materials with a typical thickness of 10-100 Angstrom, on a suitable substrate. Such coatings play an important role in enhancing the reflectivity of X-ray mirrors by allowing reflections at angles much larger than the critical angle of X-ray reflection for the given materials. Coating with an equal thickness of each bilayer enhances the reflectivity at discrete energies, satisfying Bragg condition. However, by systematically varying the bilayer thickness in the multilayer stack, it is possible to design X-ray mirrors having enhanced reflectivity over a broad energy range. One of the most important applications of such a depth graded multilayer mirror is to realize hard X-ray telescopes for astronomical purposes. Design of such multilayer X-ray mirrors and their characterization with X-ray reflectivity measurements require appropriate software tools. We have initiated the development of hard X-ray optics for future Indian X-ray astronomical missions, and in this context, we have developed a program, DarpanX, to calculate X-ray reflectivity for single and multilayer mirrors. It can be used as a stand-alone tool for designing multilayer mirrors with required characteristics. But more importantly, it has been implemented as a local model for the popular X-ray spectral fitting program, XSPEC, and thus can be used for accurate fitting of the experimentally measured X-ray reflectivity data. DarpanX is implemented as a Python 3 module, and an API is provided to access the underlying algorithms. Here we present details of DarpanX implementation and its validation for different type multilayer structures. We also demonstrate the model fitting capability of DarpanX for experimental X-ray reflectivity measurements of single and multilayer samples. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Comments: Accepted for publication in Astronomy and Computing, 13 pages, 9 figures

Journal ref: Astronomy and Computing, 2021, 100446

Design guidelines for a highly efficient high-purity Germanium (HPGe)-based double-heterojunction solar cell

Authors: Jaker Hossain, Md. Mahabub Alam Moon, Bipanko Kumar Mondal, Mohammad Abdul Halim

Abstract: In spite of having higher carrier mobilities and absorption coefficients of germanium (Ge) than those of silicon (Si), there has been less focus on Ge-based solar cells due to the low bandgap and high-cost of Ge wafer as well as requirement of its high-purity level. Currently, availability of high-purity Ge (HPGe), the low-cost wafer slicing method and proper design guidelines make it possible to… ▽ More In spite of having higher carrier mobilities and absorption coefficients of germanium (Ge) than those of silicon (Si), there has been less focus on Ge-based solar cells due to the low bandgap and high-cost of Ge wafer as well as requirement of its high-purity level. Currently, availability of high-purity Ge (HPGe), the low-cost wafer slicing method and proper design guidelines make it possible to design HPGe-based solar cells. Accordingly, in this article, we have designed and simulated a novel n-CdS/p-HPGe/p+-BaSi2 based npp+ double-heterojunction solar cell, where HPGe, cadmium sulfide (CdS) and orthorhombic barium disilicide (beta-BaSi2) have been used as the absorber, window and back-surface field (BSF) layers, respectively. Using the solar cell capacitance simulator (SCAPS-1D), the effects of different physical parameters such as the thickness, do** and defect densities, band offsets and temperature on the photovoltaic (PV) parameters of the designed solar cells have been investigated systematically. This article renders the optimized PV parameters to improve the device performance with the highest power conversion efficiency (PCE) of ~45.65% with a high open-circuit voltage of 1.16 V owing to the high built-in voltage of 1.7 V for the n-CdS/p-HPGe/p+-BaSi2 solar cells. This efficiency is almost consistent with the detailed-balance limit for double heterojunction solar cell. △ Less

Submitted 29 September, 2020; originally announced September 2020.

Comments: 23 pages, 9 figures

Solar X-ray Monitor On Board the Chandrayaan-2 Orbiter: In-flight Performance and Science Prospects

Authors: N. P. S. Mithun, Santosh V. Vadawale, Aveek Sarkar, M. Shanmugam, Arpit R. Patel, Biswajit Mondal, Bhuwan Joshi, Janardhan P., Hiteshkumar L. Adalja, Shiv Kumar Goyal, Tinkal Ladiya, Neeraj Kumar Tiwari, Nishant Singh, Sushil Kumar, Manoj K. Tiwari, M. H. Modi, Anil Bhardwaj

Abstract: The Solar X-ray Monitor (abbreviated as XSM) on board India's Chandrayaan-2 mission is designed to carry out broadband spectroscopy of the Sun from lunar orbit. It observes the Sun as a star and measures the spectrum every second in the soft X-ray band of 1 - 15 keV with an energy resolution better than 180 eV at 5.9 keV. The primary objective of the XSM is to provide the incident solar spectrum f… ▽ More The Solar X-ray Monitor (abbreviated as XSM) on board India's Chandrayaan-2 mission is designed to carry out broadband spectroscopy of the Sun from lunar orbit. It observes the Sun as a star and measures the spectrum every second in the soft X-ray band of 1 - 15 keV with an energy resolution better than 180 eV at 5.9 keV. The primary objective of the XSM is to provide the incident solar spectrum for the X-ray fluorescence spectroscopy experiment on the Chandrayaan-2 orbiter, which aims to generate elemental abundance maps of the lunar surface. However, observations with the XSM can independently be used to study the Sun as well. The Chandrayaan-2 mission was launched on 22 July 2019, and the XSM began nominal operations, in lunar orbit, from September 2019. The in-flight observations, so far, have shown that its spectral performance has been identical to that on the ground. Measurements of the effective area from ground calibration were found to require some refinement, which has been carried out using solar observations at different incident angles. It also has been shown that the XSM is sensitive enough to detect solar activity well below A-class. This makes the investigations of microflares and the quiet solar corona feasible in addition to the study of the evolution of physical parameters during intense flares. This article presents the in-flight performance and calibration of the XSM instrument and discusses some specific science cases that can be addressed using observations with the XSM. △ Less

Submitted 21 September, 2020; originally announced September 2020.

Comments: 31 pages, 11 figures; accepted for publication in Solar Physics

Journal ref: Sol Phys 295: 139 (2020)

Ground Calibration of Solar X-ray Monitor On-board Chandrayaan-2 Orbiter

Authors: N. P. S. Mithun, Santosh V. Vadawale, M. Shanmugam, Arpit R. Patel, Neeraj Kumar Tiwari, Hiteshkumar L. Adalja, Shiv Kumar Goyal, Tinkal Ladiya, Nishant Singh, Sushil Kumar, Manoj K. Tiwari, M. H. Modi, Biswajit Mondal, Aveek Sarkar, Bhuwan Joshi, P. Janardhan, Anil Bhardwaj

Abstract: Chandrayaan-2, the second Indian mission to the Moon, carries a spectrometer called the Solar X-ray Monitor (XSM) to perform soft X-ray spectral measurements of the Sun while a companion payload measures the fluorescence emission from the Moon. Together these two payloads will provide quantitative estimates of elemental abundances on the lunar surface. XSM is also expected to provide significant c… ▽ More Chandrayaan-2, the second Indian mission to the Moon, carries a spectrometer called the Solar X-ray Monitor (XSM) to perform soft X-ray spectral measurements of the Sun while a companion payload measures the fluorescence emission from the Moon. Together these two payloads will provide quantitative estimates of elemental abundances on the lunar surface. XSM is also expected to provide significant contributions to the solar X-ray studies with its highest time cadence and energy resolution spectral measurements. For this purpose, the XSM employs a Silicon Drift Detector and carries out energy measurements of incident photons in the 1 -- 15 keV range with a resolution of less than 180 eV at 5.9 keV, over a wide range of solar X-ray intensities. Extensive ground calibration experiments have been carried out with the XSM using laboratory X-ray sources as well as X-ray beam-line facilities to determine the instrument response matrix parameters required for quantitative spectral analysis. This includes measurements of gain, spectral redistribution function, and effective area, under various observing conditions. The capability of the XSM to maintain its spectral performance at high incident flux as well as the dead-time and pile-up characteristics have also been investigated. The results of these ground calibration experiments of the XSM payload are presented in this article. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Comments: Submitted to Experimental Astronomy

Unveiling the electrical and thermoelectric properties of highly degenerate indium selenide thin films: Indication of In3Se4 phase

Authors: Jaker Hossain, Md. Julkarnain, B. K. Mondal, M. A. Newaz, K. A. Khan

Abstract: The effects of annealing and variation of temperature on the electrical and thermoelectric properties of e-beam evaporated InSe thin films has been investigated in details. The XRD study demonstrates that the as-deposited InSe thin films are amorphous while they become polycrystalline with the presence of In3Se4 phase after annealing. The SEM micrographs reveal that the surfaces of as-deposited fi… ▽ More The effects of annealing and variation of temperature on the electrical and thermoelectric properties of e-beam evaporated InSe thin films has been investigated in details. The XRD study demonstrates that the as-deposited InSe thin films are amorphous while they become polycrystalline with the presence of In3Se4 phase after annealing. The SEM micrographs reveal that the surfaces of as-deposited films are smooth whereas they become non-uniform due to annealing. The heating and cooling cycles of the as-deposited films exhibit that the resistivity of the films shows an irreversible phase-transition and become stable after 3-4 successive heat-treatment operations in air. The electrical conductivity of annealed InSe thin films shows a highly degenerate semiconducting (metallic) behavior. The thermopower of the annealed films indicates that InSe thin film is a highly degenerate n-type semiconductor i.e. metallic. Thickness dependence thermopower obeys the Fuchs-Sondheimer theory. The optical band gap of the annealed films increases as compared to the as-deposited films. These results indicate that InSe thin films encounter a phase-transformation from In2Se3 to a new In3Se4 metallic phase with an optical band gap of ~1.8 eV due to heat-treatment. △ Less

Submitted 1 July, 2019; originally announced July 2019.

Comments: 25 pages, 16 figures

Journal ref: Mat. Res. Express, 2019

Physical properties of RIr3 (R = Gd, Tb, Ho) compounds with coexisting polymorphic phases

Authors: Binita Mondal, Shovan Dan, Sudipta Mondal, R. N. Bhowmik, R. Ranganathan, Chandan Mazumdar

Abstract: The binary compounds GdIr3, TbIr3 and HoIr3 are synthesized successfully and found to form in macroscopic co-existence of two polymorphic phases: C15b and AuCu3-type. The dc magnetization and heat capacity studies confirm that C15b phase orders ferromagnetically, whereas the AuCu3 phase remains paramagnetic down to 2 K. The frequency dependent ac-susceptibility data, time dependent magnetic relaxa… ▽ More The binary compounds GdIr3, TbIr3 and HoIr3 are synthesized successfully and found to form in macroscopic co-existence of two polymorphic phases: C15b and AuCu3-type. The dc magnetization and heat capacity studies confirm that C15b phase orders ferromagnetically, whereas the AuCu3 phase remains paramagnetic down to 2 K. The frequency dependent ac-susceptibility data, time dependent magnetic relaxation behavior and magnetic memory effect studies suggest that TbIr3 and HoIr3 are cannonical spin-glass system, but no glassy feature could be found in GdIr3. The critical behavior of all the three compounds has been investigated from the magnetization and heat capacity measurements around the transition temperature (TC). The critical exponents alpha, beta, gamma and delta have been estimated using different techniques such as Arrott-Noaks plot, Kouvel-Fisher plot, critical isotherm as well as analysis of specific heat data and study of magnetocaloric effect. The critical analysis study identifies the type of universal magnetic class in which the three compounds belong. △ Less

Submitted 9 April, 2019; originally announced April 2019.

Comments: 18 pages, 12 figures

Exponential Structure of Income Inequality: Evidence from 67 Countries

Authors: Yong Tao, Xiangjun Wu, Tao Zhou, Weibo Yan, Yanyuxiang Huang, Han Yu, Benedict Mondal, Victor M. Yakovenko

Abstract: Economic competition between humans leads to income inequality, but, so far, there has been little understanding of underlying quantitative mechanisms governing such a collective behavior. We analyze datasets of household income from 67 countries, ranging from Europe to Latin America, North America and Asia. For all of the countries, we find a surprisingly uniform rule: Income distribution for the… ▽ More Economic competition between humans leads to income inequality, but, so far, there has been little understanding of underlying quantitative mechanisms governing such a collective behavior. We analyze datasets of household income from 67 countries, ranging from Europe to Latin America, North America and Asia. For all of the countries, we find a surprisingly uniform rule: Income distribution for the great majority of populations (low and middle income classes) follows an exponential law. To explain this empirical observation, we propose a theoretical model within the standard framework of modern economics and show that free competition and Rawls' fairness are the underlying mechanisms producing the exponential pattern. The free parameters of the exponential distribution in our model have an explicit economic interpretation and direct relevance to policy measures intended to alleviate income inequality. △ Less

Submitted 15 December, 2017; v1 submitted 5 December, 2016; originally announced December 2016.

Comments: V.1: 22 pages, 4 figures, 4 tables; V.2: 39 pages, 4 figures, 5 tables, new section on consistent estimate of fit parameters, accepted to Journal of Economic Interaction and Coordination

Journal ref: Journal of Economic Interaction and Coordination, 14, 345 (2019)

Spectra of general hypergraphs

Authors: Anirban Banerjee, Arnab Char, Bibhash Mondal

Abstract: Here, we show a method to reconstruct connectivity hypermatrices of a general hypergraph (without any self loop or multiple edge) using tensor. We also study the different spectral properties of these hypermatrices and find that these properties are similar for graphs and uniform hypergraphs. The representation of a connectivity hypermatrix that is proposed here can be very useful for the further… ▽ More Here, we show a method to reconstruct connectivity hypermatrices of a general hypergraph (without any self loop or multiple edge) using tensor. We also study the different spectral properties of these hypermatrices and find that these properties are similar for graphs and uniform hypergraphs. The representation of a connectivity hypermatrix that is proposed here can be very useful for the further development in spectral hypergraph theory. △ Less

Submitted 22 January, 2017; v1 submitted 9 January, 2016; originally announced January 2016.

Comments: This paper is already online available at Linear algebra and its application

MSC Class: 05C65; 15A18

A Lorentz Covariant Holoraumy-Induced "Gadget" From Minimal Off-Shell 4D, N = 1 Supermultiplets

Authors: S. J. Gates, Jr., T. Grover, M. D. Miller-Dickson, B. A. Mondal, A. Oskoui, S. Regmi, E. Ross, R. Shetty

Abstract: Starting from three minimal off-shell 4D, $\cal N$ = 1 supermultiplets, using constructions solely defined within the confines of the four dimensional field theory we show the existence of a "gadget" - a member of a class of metrics on the representation space of the supermultiplets - whose values directly and completely correspond to the values of a metric defined on the 1d, $N$ = 4 adinkra netwo… ▽ More Starting from three minimal off-shell 4D, $\cal N$ = 1 supermultiplets, using constructions solely defined within the confines of the four dimensional field theory we show the existence of a "gadget" - a member of a class of metrics on the representation space of the supermultiplets - whose values directly and completely correspond to the values of a metric defined on the 1d, $N$ = 4 adinkra networks adjacency matrices corresponding to the projections of the four dimensional supermultiplets. △ Less

Submitted 30 August, 2015; originally announced August 2015.

Comments: LaTeX twice, 4 figures, 17 ppg

Report number: UMDEPP-015-011

3D Channel Model in 3GPP

Authors: Bishwarup Mondal, Timothy A. Thomas, Eugene Visotsky, Frederick W. Vook, Amitava Ghosh, Young-Han Nam, Yang Li, Charlie Zhang, Min Zhang, Qinglin Luo, Yuichi Kakishima, Koshiro Kitao

Abstract: Multi-antenna techniques capable of exploiting the elevation dimension are anticipated to be an important air-interface enhancement targeted to handle the expected growth in mobile traffic. In order to enable the development and evaluation of such multi-antenna techniques, the 3rd generation partnership project (3GPP) has recently developed a 3-dimensional (3D) channel model. The existing 2-dimens… ▽ More Multi-antenna techniques capable of exploiting the elevation dimension are anticipated to be an important air-interface enhancement targeted to handle the expected growth in mobile traffic. In order to enable the development and evaluation of such multi-antenna techniques, the 3rd generation partnership project (3GPP) has recently developed a 3-dimensional (3D) channel model. The existing 2-dimensional (2D) channel models do not capture the elevation channel characteristics lending them insufficient for such studies. This article describes the main components of the newly developed 3D channel model and the motivations behind introducing them. One key aspect is the ability to model channels for users located on different floors of a building (at different heights). This is achieved by capturing a user height dependency in modelling some channel characteristics including pathloss, line-of-sight (LOS) probability, etc. In general this 3D channel model follows the framework of WINNERII/WINNER+ while also extending the applicability and the accuracy of the model by introducing some height and distance dependent elevation related parameters. △ Less

Submitted 5 February, 2015; originally announced February 2015.

Comments: Accepted for publication in IEEE Communications Magazine

An Acetate Bound Cobalt Oxide Catalyst for Water Oxidation: Role of Monovalent Anions and Cations In Lowering Overpotential

Authors: Subal Dey, Biswajit Mondal, Abhishek Dey

Abstract: Co(II) dissolved in acetate buffer at pH 7 is found to be a good water oxidation catalyst (WOC) showing electrocatalytic water oxidation current significantly greater than Co(II) in phosphate buffer under the same conditions owing to the higher solubility of the former. When electrodeposited on ITO/FTO electrodes it forms acetate bound cobalt(II)oxide based material (Co-Ac-WOC) showing catalytic w… ▽ More Co(II) dissolved in acetate buffer at pH 7 is found to be a good water oxidation catalyst (WOC) showing electrocatalytic water oxidation current significantly greater than Co(II) in phosphate buffer under the same conditions owing to the higher solubility of the former. When electrodeposited on ITO/FTO electrodes it forms acetate bound cobalt(II)oxide based material (Co-Ac-WOC) showing catalytic water oxidation current density of 0.1 mA/cm$^{2}$ at 830 mV and 1 mA/cm$^{2}$ at 1 V in a pH 7 buffer solution. The morphology of Co-Ac-OEC is investigated with AFM, HR-TEM and SEM (at different times and electrodeposition potentials). The chemical composition of Co-Ac-OEC is investigated using XPS, EDX, combustion analysis and ATR-FTIR which indicates that this material has a CoO core with chloride and acetate anions bound to the Co center. Sodium is found to be integrated in the Co-Ac-WOC. The presence of the sodium ions and the chloride ions lowers the onset potential for oxygen evolution reaction (OER) by 240 mV relative to the classic Co-Pi at pH 7. The lower onset potential and higher OER current lowers the exchange current density to 10$^{-6.7}$ in Co-Ac-WOC relative to 10$^{-8}$-10$^{-10}$ in Co-Pi and its derivatives. △ Less

Submitted 22 February, 2014; originally announced February 2014.

Comments: Co Based Water Oxidation Catalyst with Minimum Over-potential

Solitary Optical pulse propagation in fused fibre coupler, Effect of Raman Scattering and switching

Authors: Basanti Mondal, A. Roy. Chowdhury

Abstract: We analyse the motion of solitary type optical pulse in a fused optical fibre coupler when inter channel raman scattering (IRS) is taken into account and same type of dispersion management is used for both the core. The paper is divided into two sections . In the first half we utilise a moment method to study the variations of the different parameters of the Gaussian pulse, such as chirp, freque… ▽ More We analyse the motion of solitary type optical pulse in a fused optical fibre coupler when inter channel raman scattering (IRS) is taken into account and same type of dispersion management is used for both the core. The paper is divided into two sections . In the first half we utilise a moment method to study the variations of the different parameters of the Gaussian pulse, such as chirp, frequency, energy etc. while in the second half assuming a general form of the stationary pulse we discuss the switching phenomena due to the coupling. It is shown that lauching a pulse in one arm of the coupler can generate pulses in both the arms, but the patterns differs in a significant manner when the strength of IRS gets changed △ Less

Submitted 5 January, 2005; originally announced January 2005.

Comments: 8 pages, 8 figures. Chaos, Solitons, Fractals (2005, to appear)

Moment method, Higher order dispersion map and other effects in optical pulse propagation

Authors: Basanti Mondal, A. Roy. Chowdhury

Abstract: Analytical and numerical procedures are applied to show that both third and second order dispersion maps can be explicitly constructed and their mutual effects on the optical pulse propagation are analysed. In these connection it is also shown how the other important features such as amplification, intra-channel Raman Scattering(IRS), fibre loss, centre frequency of the pulse spectrum effect the… ▽ More Analytical and numerical procedures are applied to show that both third and second order dispersion maps can be explicitly constructed and their mutual effects on the optical pulse propagation are analysed. In these connection it is also shown how the other important features such as amplification, intra-channel Raman Scattering(IRS), fibre loss, centre frequency of the pulse spectrum effect the propagation of pulse. Due to the presence of IRS, moment method is adopted which is easily reduced to usual Hamiltonian technique in absence of IRS. It is observed that the long time periodic behaviour is stabilized by the third order dispersion map. Though the introduction of IRS and other effects perturb the situation, one can observe that except for a very special case it remains stable △ Less

Submitted 3 January, 2005; originally announced January 2005.

Comments: 7 pages,6 figures. submitted for publication