-
Influence of amorphous phase on coercivity in SmCo5-Cu nanocomposites
Authors:
Franziska Staab,
Yangyiwei Yang,
Eren Foya,
Enrico Bruder,
Benjamin Zingsem,
Esmaeil Adabifiroozjaei,
Konstantin Skokov,
Michael Farle,
Rafal E. Dunin-Borkowski,
Leopoldo Molina-Luna,
Oliver Gutfleisch,
Bai-Xiang Xu,
Karsten Durst
Abstract:
Severe plastic deformation of powder blends consisting of SmCo5-Cu results in magnetically hardened nanocomposite bulk materials. The microstructure is continuously refined with increasing torsional deformation, yet, coercivity saturates at a certain level of strain. Transmission electron microscopy (TEM) investigation of the microstructure reveals a partial amorphization of the SmCo5 phase due to…
▽ More
Severe plastic deformation of powder blends consisting of SmCo5-Cu results in magnetically hardened nanocomposite bulk materials. The microstructure is continuously refined with increasing torsional deformation, yet, coercivity saturates at a certain level of strain. Transmission electron microscopy (TEM) investigation of the microstructure reveals a partial amorphization of the SmCo5 phase due to high-pressure torsion by 20 applied rotations. In this amorphous matrix nanocrystals are embedded. The effect of these experimentally observed microstructural features on the magnetic properties are investigated by micromagnetic simulations, which show that an increasing volume fraction of nanocrystals is beneficial for higher coercivities. For a fixed volume fraction of nanocrystals the simulations reveal an increasing coercivity with decreasing the size of the nanocrystals due to increasing number of interfaces acting as pinning sites. Furthermore, our micromagnetic simulations disclose the mechanisms of the saturation and decline of magnetic hardening due to the strain induced by high-pressure torsion. The calculated coercivity fits very well to the experimentally observed coercivity of Hc=1.34 T. The knowledge can also be used to develop and provide optimization strategies from the microstructure perspective.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Magneto-active composites with locally tailored stiffness produced by laser powder bed fusion
Authors:
Kilian Schäfer,
Matthias Lutzi,
Muhammad Bilal Khan,
Lukas Schäfer,
Konstantin Skokov,
Imants Dirba,
Sebastian Bruns,
Iman Valizadeh,
Oliver Weeger,
Claas Hartmann,
Mario Kupnik,
Esmaeil Adabifiroozjaei,
Leopoldo Molina-Luna,
Oliver Gutfleisch
Abstract:
Additive manufacturing technologies enable the production of complex and bioinspired shapes using magneto-responsive materials, which find diverse applications in soft robotics. Particularly, the development of composites with controlled gradients in mechanical properties offers new prospects for advancements in magneto-active materials. However, achieving such composites with gradients typically…
▽ More
Additive manufacturing technologies enable the production of complex and bioinspired shapes using magneto-responsive materials, which find diverse applications in soft robotics. Particularly, the development of composites with controlled gradients in mechanical properties offers new prospects for advancements in magneto-active materials. However, achieving such composites with gradients typically involves complex multi-material printing procedures. In this study, a single-step laser powder bed fusion (LPBF) process is proposed that enables precise local adjustments of the mechanical stiffness within magneto-active composites. By utilizing distinct laser parameters in specific regions of a composite containing thermoplastic polyurethane and atomized magnetic powder derived from hard magnetic Nd-Fe-B, the stiffness of the composite can be modified within the range of 2 to 22 MPa. Various magneto-responsive actuators with locally tailored stiffness are fabricated and their magnetic performance is investigated. The enhanced response exhibited by actuators with locally adjusted mechanical properties in comparison to their homogeneous counterparts with identical geometries is shown. As a demonstration of a biomedical application, a magnetically responsive stent with localized adjustment is presented with the ability to meet specific requirements in terms of geometry and local stiffness based on an individual's anatomy and disease condition. The proposed method presents an approach for creating functionally graded materials using LPBF, not only for magneto-active materials but also for several other structural and functional materials.
△ Less
Submitted 20 December, 2023; v1 submitted 4 May, 2023;
originally announced May 2023.
-
The Premartensite and Martensite in Fe50Rh50 System
Authors:
Esmaeil Adabifiroozjaei,
Fernando Maccari,
Lukas Schaefer,
Tianshu Jiang,
Oscar Recalde-Benitez,
Alisa Chirkova,
Navid Shayanfar,
Imants Dirba,
Nagaarjhuna A Kani,
Olga Shuleshova,
Robert Winkler,
Alexander Zintler,
Ziyuan Rao,
Lukas Pfeuffer,
Andras Kovacs,
Rafal E Dunin-Borkowski,
Michael Farle,
Konstantin Skokov,
Baptiste Gault,
Markus Gruner,
Oliver Gutfleisch,
Leopoldo Molina-Luna
Abstract:
Metallic/intermetalic materials with BCC structures hold an intrinsic instability due to phonon softening along [110] dirrection, causing BCC to lower-symmetry phases transformation when the BCC structures are thermally or mechanically stressed. Fe50Rh50 binary system is one of the exceptional BCC structures (ordered-B2) that has not been yet showing such transformation upon application of thermal…
▽ More
Metallic/intermetalic materials with BCC structures hold an intrinsic instability due to phonon softening along [110] dirrection, causing BCC to lower-symmetry phases transformation when the BCC structures are thermally or mechanically stressed. Fe50Rh50 binary system is one of the exceptional BCC structures (ordered-B2) that has not been yet showing such transformation upon application of thermal stress, although mechanical deformation results in B2 to disordered FCC (gamma) and L10 phases transformation. Here, a comprehensive transmission electron microscopy (TEM) study is conducted on thermally-stressed samples of Fe50Rh50 aged at water and liquid nitrogen from 1150 degree C and 1250 degree C. The results show that, samples quenched from 1150 degree C into water and liquid nitrogen show presence of 1/4{110} and 1/2{110} satellite reflections, the latter of which is expected from phonon dispersion curves obtained by density functional theory calculation. Therefore, it is believed that Fe50Rh50 maintains the B2 structure that is in premartensite state. Once Fe50Rh50 is quenched from 1250 degree C into liquid nitrogen, formation of two short-range ordered tetragonal phases with various c/a ratios (~1.15 and 1.4) is observed in line with phases formed from mechanically deformed (30%) sample. According to our observations, an accurate atomistic shear model ({110}<1-10>) is presented that describes the martensitic transformation of B2 to these tetragonal phases. These findings offer implications useful for understanding of magnetic and physical characteristics of metallic/intermetallic materials.
△ Less
Submitted 3 May, 2023; v1 submitted 2 May, 2023;
originally announced May 2023.
-
Towards engineering the perfect defect in high-performing permanent magnets
Authors:
S. Giron,
N. Polin,
E. Adabifiroozjaei,
Y. Yang,
A. Kovács,
T. P. Almeida,
D. Ohmer,
K. Üstüner,
A. Saxena,
M. Katter,
I. A. Radulov,
C. Freysoldt,
R. E. Dunin-Borkowski,
M. Farle,
K. Durst,
H. Zhang,
L. Alff,
K. Ollefs,
B. -X. Xu,
O. Gutfleisch,
L. Molina-Luna,
B. Gault,
K. P. Skokov
Abstract:
Permanent magnets draw their properties from a complex interplay, across multiple length scales, of the composition and distribution of their constituting phases, that act as building blocks, each with their associated intrinsic properties. Gaining a fundamental understanding of these interactions is hence key to decipher the origins of their magnetic performance and facilitate the engineering of…
▽ More
Permanent magnets draw their properties from a complex interplay, across multiple length scales, of the composition and distribution of their constituting phases, that act as building blocks, each with their associated intrinsic properties. Gaining a fundamental understanding of these interactions is hence key to decipher the origins of their magnetic performance and facilitate the engineering of better-performing magnets, through unlocking the design of the "perfect defects" for ultimate pinning of magnetic domains. Here, we deployed advanced multiscale microscopy and microanalysis on a bulk Sm2(CoFeCuZr)17 pinning-type high-performance magnet with outstanding thermal and chemical stability. Making use of regions with different chemical compositions, we showcase how both a change in the composition and distribution of copper, along with the atomic arrangements enforce the pinning of magnetic domains, as imaged by nanoscale magnetic induction map**. Micromagnetic simulations bridge the scales to provide an understanding of how these peculiarities of micro- and nanostructure change the hard magnetic behaviour of Sm2(CoFeCuZr)17 magnets. Unveiling the origins of the reduced coercivity allows us to propose an atomic-scale defect and chemistry manipulation strategy to define ways toward future hard magnets.
△ Less
Submitted 4 June, 2023; v1 submitted 28 April, 2023;
originally announced April 2023.
-
A machine learning framework for quantifying chemical segregation and microstructural features in atom probe tomography data
Authors:
Alaukik Saxena,
Nikita Polin,
Navyanth Kusampudi,
Shyam Katnagallu,
Leopoldo Molina-Luna,
Oliver Gutfleisch,
Benjamin Berkels,
Baptiste Gault,
Jörg Neugebauer,
Christoph Freysoldt
Abstract:
Atom probe tomography (APT) is ideally suited to characterize and understand the interplay of chemical segregation and microstructure in modern multicomponent materials. Yet, the quantitative analysis typically relies on human expertise to define regions of interest. We introduce a computationally efficient, multistage machine learning strategy to identify chemically distinct domains in a semi aut…
▽ More
Atom probe tomography (APT) is ideally suited to characterize and understand the interplay of chemical segregation and microstructure in modern multicomponent materials. Yet, the quantitative analysis typically relies on human expertise to define regions of interest. We introduce a computationally efficient, multistage machine learning strategy to identify chemically distinct domains in a semi automated way, and subsequently quantify their geometric and compositional characteristics. In our algorithmic pipeline, we first coarse grain the APT data into voxels, collect the composition statistics, and decompose it via clustering in composition space. The composition classification then enables the real space segmentation via a density based clustering algorithm, thus revealing the microstructure at voxel resolution. Our approach is demonstrated for a Sm(Co,Fe)ZrCu alloy. The alloy exhibits two precipitate phases with a plate-like, but intertwined morphology. The primary segmentation is further refined to disentangle these geometrically complex precipitates into individual plate like parts by an unsupervised approach based on principle component analysis, or a U-Net based semantic segmentation trained on the former. Following the chemical and geometric analysis, detailed chemical distribution and segregation effects relative to the predominant plate-like geometry can be readily mapped without resorting to the initial voxelization.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Dissipation losses limiting first-order phase transition materials in cryogenic caloric cooling: A case study on all-d-metal Ni(-Co)-Mn-Ti Heusler alloys
Authors:
Benedikt Beckmann,
David Koch,
Lukas Pfeuffer,
Tino Gottschall,
Andreas Taubel,
Esmaeil Adabifiroozjaei,
Olga N. Miroshkina,
Stefan Riegg,
Timo Niehoff,
Nagaarjhuna A. Kani,
Markus E. Gruner,
Leopoldo Molina-Luna,
Konstantin P. Skokov,
Oliver Gutfleisch
Abstract:
Ni-Mn-based Heusler alloys, in particular all-d-metal Ni(-Co)-Mn-Ti, are highly promising materials for energy-efficient solid-state refrigeration as large multicaloric effects can be achieved across their magnetostructural martensitic transformation. However, no comprehensive study on the crucially important transition entropy change $Δs_t$ exists so far for Ni(-Co)-Mn-Ti. Here, we present a syst…
▽ More
Ni-Mn-based Heusler alloys, in particular all-d-metal Ni(-Co)-Mn-Ti, are highly promising materials for energy-efficient solid-state refrigeration as large multicaloric effects can be achieved across their magnetostructural martensitic transformation. However, no comprehensive study on the crucially important transition entropy change $Δs_t$ exists so far for Ni(-Co)-Mn-Ti. Here, we present a systematic study analyzing the composition and temperature dependence of $Δs_t$. Our results reveal a substantial structural entropy change contribution of approximately 65 J(kgK)$^{-1}$, which is compensated at lower temperatures by an increasingly negative entropy change associated with the magnetic subsystem. This leads to compensation temperatures $T_{comp}$ of 75 K and 300 K in Ni$_{35}$Co$_{15}$Mn$_{50-y}$Ti$_{y}$ and Ni$_{33}$Co$_{17}$Mn$_{50-y}$Ti$_{y}$, respectively, below which the martensitic transformations are arrested. In addition, we simultaneously measured the responses of the magnetic, structural and electronic subsystems to the temperature- and field-induced martensitic transformation near $T_{comp}$, showing an abnormal increase of hysteresis and consequently dissipation energy at cryogenic temperatures. Simultaneous measurements of magnetization and adiabatic temperature change $ΔT_{ad}$ in pulsed magnetic fields reveal a change in sign of $ΔT_{ad}$ and a substantial positive and irreversible $ΔT_{ad}$ up to 15 K at 15 K as a consequence of increased dissipation losses and decreased heat capacity. Most importantly, this phenomenon is universal, it applies to any first-order material with non-negligible hysteresis and any stimulus, effectively limiting the utilization of their caloric effects for gas liquefaction at cryogenic temperatures.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
Microstructure engineering of metamagnetic Ni-Mn-based Heusler compounds by Fe-do**: A roadmap towards excellent cyclic stability combined with large elastocaloric and magnetocaloric effects
Authors:
Lukas Pfeuffer,
Jonas Lemke,
Navid Shayanfar,
Stefan Riegg,
David Koch,
Andreas Taubel,
Franziska Scheibel,
Nagaarjhuna A. Kani,
Esmaeil Adabifiroozjaei,
Leopoldo Molina-Luna,
Konstantin P. Skokov,
Oliver Gutfleisch
Abstract:
Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable refrigeration. However, during cyclic operation these alloys suffer from structural and functional fatigue as a result of their high intrinsic brittleness. Here, we present…
▽ More
Ni-Mn-based metamagnetic shape-memory alloys exhibit a giant thermal response to magnetic fields and uniaxial stress which can be utilized in single caloric or multicaloric cooling concepts for energy-efficient and sustainable refrigeration. However, during cyclic operation these alloys suffer from structural and functional fatigue as a result of their high intrinsic brittleness. Here, we present based on Fe-do** of Ni-Mn-In a microstructure design strategy which simultaneously improves cyclic stability and maintains the excellent magnetocaloric and elastocaloric properties. Our results reveal that precipitation of a strongly Fe-enriched and In-depleted coherent secondary gamma-phase at grain boundaries can ensure excellent mechanical stability by hindering intergranular fracture during cyclic loading. In this way, a large elastocaloric effect of -4.5 K was achieved for more than 16000 cycles without structural or functional degradation, which corresponds to an increase of the cyclic stability by more than three orders of magnitude as compared to single-phase Ni-Mn-In-(Fe). In addition, we demonstrate that the large magnetocaloric effect of single-phase Ni-Mn-In-(Fe) can be preserved in the dual-phase material when the secondary gamma-phase is exclusively formed at grain boundaries as the martensitic transformation within the Heusler matrix is barely affected. This way, an adiabatic temperature change of -3 K and an isothermal entropy change of 15 $Jkg^{-1}K^{-1}$ was obtained in 2 T for dual-phase Ni-Mn-In-Fe. We expect that this concept can be applied to other single caloric and mutlicaloric materials, therewith paving the way for solid-state caloric cooling applications.
△ Less
Submitted 4 November, 2021; v1 submitted 2 November, 2021;
originally announced November 2021.