-
The Casimir effect in graphene systems: Experiment and theory
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
The Casimir effect in graphene systems is reviewed with emphasis made on the large thermal correction to the Casimir force predicted at short separations between the test bodies. The computational results for the Casimir pressure and for the thermal correction are presented for both pristine graphene and real graphene sheets, which possess nonzero energy gap and chemical potential, obtained by mea…
▽ More
The Casimir effect in graphene systems is reviewed with emphasis made on the large thermal correction to the Casimir force predicted at short separations between the test bodies. The computational results for the Casimir pressure and for the thermal correction are presented for both pristine graphene and real graphene sheets, which possess nonzero energy gap and chemical potential, obtained by means of exact polarization tensor. Two experiments on measuring the gradient of the Casimir force between an Au-coated sphere and graphene- coated substrates performed by using a modified atomic force microscope cantilever-based technique are described. It is shown that the measurement data of both experiments are in agreement with theoretical predictions of the Lifshitz theory using the polarization tensor. Additionally, several important improvements made in the second experiment, allowed to demonstrate the predicted large thermal effect in the Casimir interaction at short separations. Possible implications of this result to resolution of long-term problems of Casimir physics are discussed.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.
-
Experimental and theoretical investigation of the thermal effect in the Casimir interaction from graphene
Authors:
M. Liu,
Y. Zhang,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We present the results of an experiment on measuring the gradient of the Casimir force between an Au-coated hollow glass microsphere and graphene-coated fused silica plate by means of a modified atomic force microscope cantilever based technique operated in the dynamic regime. These measurements were performed in high vacuum at room temperature. The energy gap and the concentration of impurities i…
▽ More
We present the results of an experiment on measuring the gradient of the Casimir force between an Au-coated hollow glass microsphere and graphene-coated fused silica plate by means of a modified atomic force microscope cantilever based technique operated in the dynamic regime. These measurements were performed in high vacuum at room temperature. The energy gap and the concentration of impurities in the graphene sample used have been measured utilizing scanning tunnelling spectroscopy and Raman spectroscopy, respectively. The measurement results for the gradients of the Casimir force are found to be in a very good agreement with theory using the polarization tensor of graphene at nonzero temperature depending on the energy gap and chemical potential with no fitting parameters. The theoretical predictions of the same theory at zero temperature are experimentally excluded over the measurement region from 250 to 517 nm. We have also investigated a dependence of the thermal correction to the Casimir force gradient on the values of the energy gap, chemical potential, and on the presence of a substrate supporting the graphene sheet. It is shown that the observed thermal effect is consistent in size with that arising for pristine graphene sheets if the impact of real conditions such as nonzero values of the energy gap, chemical potential, and the presence of a substrate is included. Implications of the obtained results to the resolution of the long-standing problems in Casimir physics are discussed. In addition to the paper published previously [M. Liu {\it et al}., Phys. Rev. Lett. {\bf 126}, 206802 (2021)], we present measurement results for the energy gap of the graphene sample, double the experimental data for the Casimir force, and perform a more complete theoretical analysis.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Demonstration of an Unusual Thermal Effect in the Casimir Force from Graphene
Authors:
M. Liu,
Y. Zhang,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We report precision measurements of the gradient of the Casimir force between an Au-coated sphere and graphene sheet deposited on a silica plate. The measurement data are compared with exact theory using the polarization tensor found in the framework of the Dirac model including effects of the nonzero chemical potential and energy gap of the graphene sample with no fitting parameters. The very goo…
▽ More
We report precision measurements of the gradient of the Casimir force between an Au-coated sphere and graphene sheet deposited on a silica plate. The measurement data are compared with exact theory using the polarization tensor found in the framework of the Dirac model including effects of the nonzero chemical potential and energy gap of the graphene sample with no fitting parameters. The very good agreement between experiment and theory demonstrates the unusually big thermal effect at separations below 1 mum which has never been observed for conventional 3D materials. Thus, it is confirmed experimentally that for graphene the effective temperature is determined by the Fermi velocity rather than by the speed of light.
△ Less
Submitted 11 May, 2021; v1 submitted 28 April, 2021;
originally announced April 2021.
-
Precision measurements of the gradient of the Casimir force between ultra clean metallic surfaces at larger separations
Authors:
Mingyue Liu,
Jun Xu,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We report precision measurements of the Casimir interaction at larger separation distances between the Au-coated surfaces of a sphere and a plate in ultrahigh vacuum using a much softer cantilever of the dynamic atomic force microscope-based setup and two-step cleaning procedure of the vacuum chamber and test body surfaces by means of UV light and Ar-ion bombardment. Compared to the previously per…
▽ More
We report precision measurements of the Casimir interaction at larger separation distances between the Au-coated surfaces of a sphere and a plate in ultrahigh vacuum using a much softer cantilever of the dynamic atomic force microscope-based setup and two-step cleaning procedure of the vacuum chamber and test body surfaces by means of UV light and Ar-ion bombardment. Compared to the previously performed experiment, two more measurement sets for the gradient of the Casimir force are provided which confirmed and slightly improved the results. Next, additional measurements have been performed with a factor of two larger oscillation amplitude of the cantilever. This allowed obtaining meaningful results at much larger separation distances. The comparison of the measurement data with theoretical predictions of the Lifshitz theory using the dissipative Drude model to describe the response of Au to the low-frequency electromagnetic field fluctuations shows that this theoretical approach is experimentally excluded over the distances from 250 to 1100nm (i.e., a major step forward has been made as compared to the previous work where it was excluded up to only 820nm). The theoretical approach using the dissipationless plasma model at low frequencies is shown to be consistent with the data over the entire measurement range from 250 to 1300nm. The possibilities to explain these puzzling results are discussed.
△ Less
Submitted 21 November, 2019; v1 submitted 2 November, 2019;
originally announced November 2019.
-
Examining the Casimir puzzle with upgraded technique and advanced surface cleaning
Authors:
Mingyue Liu,
Jun Xu,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We performed measurements of the gradient of the Casimir force between Au-coated surfaces of a sphere and a plate by means of significantly upgraded dynamic atomic force microscope (AFM) based technique. By introducing combined cleaning procedure of interior surfaces of the vacuum chamber and the test bodies by means of UV light and Ar ions, we reached higher vacuum and eliminated the role of elec…
▽ More
We performed measurements of the gradient of the Casimir force between Au-coated surfaces of a sphere and a plate by means of significantly upgraded dynamic atomic force microscope (AFM) based technique. By introducing combined cleaning procedure of interior surfaces of the vacuum chamber and the test bodies by means of UV light and Ar ions, we reached higher vacuum and eliminated the role of electrostatic patches. Furthermore, the use of much softer cantilever allowed a sixfold decrease of the systematic error in measuring the force gradient. The experimental data are compared with theoretical predictions of the Lifshitz theory taking into account corrections due to the inaccuracy of the proximity force approximation and that due to surface roughness. It is shown that the theoretical approach accounting for the relaxation properties of free electrons is excluded by the data up to a larger than previous sphere-plate separation of 820~nm, whereas an alternative approach is found in a very good agreement with the data. Importance of these results in connection with the foundations of quantum statistical physics is discussed.
△ Less
Submitted 2 August, 2019;
originally announced August 2019.
-
Compact fiber optical interferometer technique to measure picometer displacements in biological piezoelectric materials
Authors:
Mingyue Liu,
Nicholas Yaraghi,
Jun Xu,
David Kisailus,
Umar Mohideen
Abstract:
A simple and robust fiber optical interferometer was developed to non-invasively study the weak piezoelectric effect from thin samples. A biological sample from inter-molt dactyl clubs obtained from the mantis shrimp was used as the test sample. The non-contact technique can measure displacements better than 0.5 picometer for samples subjected to large electric fields. The approach utilizes the ph…
▽ More
A simple and robust fiber optical interferometer was developed to non-invasively study the weak piezoelectric effect from thin samples. A biological sample from inter-molt dactyl clubs obtained from the mantis shrimp was used as the test sample. The non-contact technique can measure displacements better than 0.5 picometer for samples subjected to large electric fields. The approach utilizes the phase dependent detection of an oscillating cavity at different frequencies from 0.5 kHz to 2.0 kHz. The piezoelectric constant of the biological samples was calculated from the optical interference fringes and determined to be in the range of 0.3-0.5 pm/V. The noise of 20 fm/Hz^0.5 in the setup is primarily due to thermally associated strains from current flow to the sample electrodes during the measurement.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Investigation of HIV-1 Gag binding with RNAs and Lipids using Atomic Force Microscopy
Authors:
Shaolong Chen,
Jun Xu,
Mingyue Liu,
A. L. N. Rao,
Roya Zandi,
Sarjeet S. Gill,
Umar Mohideen
Abstract:
Atomic Force Microscopy was utilized to study the morphology of Gag, ΨRNA, and their binding complexes with lipids in a solution environment with 0.1Å vertical and 1nm lateral resolution. TARpolyA RNA was used as a RNA control. The lipid used was phospha-tidylinositol-(4,5)-bisphosphate (PI(4,5)P2). The morphology of specific complexes Gag-ΨRNA, Gag-TARpolyA RNA, Gag-PI(4,5)P2 and PI(4,5)P2-ΨRNA-G…
▽ More
Atomic Force Microscopy was utilized to study the morphology of Gag, ΨRNA, and their binding complexes with lipids in a solution environment with 0.1Å vertical and 1nm lateral resolution. TARpolyA RNA was used as a RNA control. The lipid used was phospha-tidylinositol-(4,5)-bisphosphate (PI(4,5)P2). The morphology of specific complexes Gag-ΨRNA, Gag-TARpolyA RNA, Gag-PI(4,5)P2 and PI(4,5)P2-ΨRNA-Gag were studied. They were imaged on either positively or negatively charged mica substrates depending on the net charges carried. Gag and its complexes consist of monomers, dimers and tetramers, which was confirmed by gel electrophoresis. The addition of specific ΨRNA to Gag is found to increase Gag multimerization. Non-specific TARpolyA RNA was found not to lead to an increase in Gag multimerization. The addition PI(4,5)P2 to Gag increases Gag multimerization, but to a lesser extent than ΨRNA. When both ΨRNA and PI(4,5)P2 are present Gag undergoes comformational changes and an even higher degree of multimerization.
△ Less
Submitted 26 May, 2019;
originally announced May 2019.
-
Reducing detrimental electrostatic effects in Casimir-force measurements and Casimir-force-based microdevices
Authors:
Jun Xu,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
It is well known that residual electrostatic forces create significant difficulties to precise measurements of the Casimir force and to wide use of Casimir-operated microdevices. We experimentally demonstrate that with the help of Ar-ion cleaning of the surfaces it is possible to make electrostatic effects negligibly small as compared to the Casimir interaction. Our experimental setup consists of…
▽ More
It is well known that residual electrostatic forces create significant difficulties to precise measurements of the Casimir force and to wide use of Casimir-operated microdevices. We experimentally demonstrate that with the help of Ar-ion cleaning of the surfaces it is possible to make electrostatic effects negligibly small as compared to the Casimir interaction. Our experimental setup consists of the dynamic atomic force microscope supplemented with an Ar-ion gun and argon reservoir. The residual potential difference between the Au-coated surfaces of a sphere and a plate was measured both before and after the in situ Ar-ion cleaning. It is shown that this cleaning decreases the magnitude of the residual potential by up to an order of magnitude and makes it almost independent on separation. The gradient of the Casimir force was measured using ordinary samples subjected to the Ar-ion cleaning. The obtained results are shown to be in good agreement with both previous precision measurements using the specially selected samples and with theoretical predictions of the Lifshitz theory. The conclusion is made that the suggested method of in situ Ar-ion cleaning is effective in reducing the electrostatic effects and therefore is a great resource for experiments on measuring the Casimir interaction and for Casimir-operated microdevices.
△ Less
Submitted 1 March, 2018;
originally announced March 2018.
-
Theory of the Casimir interaction for graphene-coated substrates using the polarization tensor and comparison with experiment
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
We propose a theory of the thermal Casimir interaction for multilayered test bodies coated with a graphene sheet. The reflection coefficients on such structures are expressed in terms of the components of the polarization tensor and the dielectric permittivities of material layers. The developed theory is applied to calculate the gradient of the Casimir force between an Au-coated sphere and a grap…
▽ More
We propose a theory of the thermal Casimir interaction for multilayered test bodies coated with a graphene sheet. The reflection coefficients on such structures are expressed in terms of the components of the polarization tensor and the dielectric permittivities of material layers. The developed theory is applied to calculate the gradient of the Casimir force between an Au-coated sphere and a graphene sheet deposited on a SiO${}_2$ film covering a Si plate, which is the configuration of a recent experiment performed by means of a dynamic atomic force microscope. The theoretical results are found to be in very good agreement with the experimental data. We thus confirm that graphene influences the Casimir interaction and can be used for tailoring the force magnitude in nanostructures.
△ Less
Submitted 6 March, 2014;
originally announced March 2014.
-
Experimental and theoretical investigation of angular dependence of the Casimir force between sinusoidally corrugated surfaces
Authors:
A. A. Banishev,
J. Wagner,
T. Emig,
R. Zandi,
U. Mohideen
Abstract:
In the current work we present the complete results for the measurement of normal Casimir force between shallow and smooth sinusoidally corrugated gold coated sphere and a plate at various angles between the corrugations using an atomic force microscope. All measured data were compared with the theoretical approach using the proximity force approximation and theory based on derivative expansion. I…
▽ More
In the current work we present the complete results for the measurement of normal Casimir force between shallow and smooth sinusoidally corrugated gold coated sphere and a plate at various angles between the corrugations using an atomic force microscope. All measured data were compared with the theoretical approach using the proximity force approximation and theory based on derivative expansion. In both cases real material properties of the surfaces and non-zero temperature were taken into account. Special attention is paid to the description of electrostatic interactions between corrugated surfaces at different angels between corrugations and samples reparation and characterization. The measured forces are found to be in good agreement with the theory including correlation effects of geometry and material properties and deviate significantly from the predictions of the proximity force approximation approach. This provides the quantitative confirmation for the observation of diffraction-type effects that are disregarded within the PFA approach. The obtained results open new opportunities for control of the Casimir effect in micromechanical systems.
△ Less
Submitted 16 June, 2014; v1 submitted 11 February, 2014;
originally announced February 2014.
-
A novel minimal in vitro system for analyzing HIV-1 Gag mediated budding
Authors:
Dong Gui,
Sharad Gupta,
Jun Xu,
Roya Zandi,
Sarjeet Gill,
I-Chueh Huang,
A. L. N. Rao,
Umar Mohideen
Abstract:
A biomimetic minimalist model membrane was used to study the mechanism and kinetics of cell-free in vitro HIV-1 Gag budding from a giant unilamellar vesicle (GUV). Real time interaction of Gag, RNA and lipid leading to the formation of mini-vesicles was measured using confocal microscopy. Gag forms resolution limited punctae on the GUV lipid membrane. Introduction of the Gag and urea to a GUV solu…
▽ More
A biomimetic minimalist model membrane was used to study the mechanism and kinetics of cell-free in vitro HIV-1 Gag budding from a giant unilamellar vesicle (GUV). Real time interaction of Gag, RNA and lipid leading to the formation of mini-vesicles was measured using confocal microscopy. Gag forms resolution limited punctae on the GUV lipid membrane. Introduction of the Gag and urea to a GUV solution containing RNA led to the budding of mini-vesicles on the inside surface of the GUV. The GUV diameter showed a linear decrease in time due to bud formation. Both bud formation and decrease in GUV size were proportional to Gag concentration. In the absence of RNA, addition of urea to GUVs incubated with Gag also resulted in subvesicle formation but exterior to the surface. These observations suggest the possibility that clustering of GAG proteins leads to membrane invagination even in the absence of host cell proteins. The method presented here is promising, and allows for systematic study of the dynamics of assembly of immature HIV and help classify the hierarchy of factors that impact the Gag protein initiated assembly of retroviruses such as HIV.
△ Less
Submitted 5 November, 2014; v1 submitted 27 November, 2013;
originally announced November 2013.
-
Investigation of the Casimir interaction between two magnetic metals in comparison with nonmagnetic test bodies
Authors:
A. A. Banishev,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We present the complete results for the dynamic experiment on measuring the gradient of the Casimir force between magnetic (Ni-coated) surfaces of a plate and a sphere. Special attention is paid to the description of some details of the setup, its calibration, error analysis and background effects. Computations are performed in the framework of the Lifshitz theory at nonzero temperature with accou…
▽ More
We present the complete results for the dynamic experiment on measuring the gradient of the Casimir force between magnetic (Ni-coated) surfaces of a plate and a sphere. Special attention is paid to the description of some details of the setup, its calibration, error analysis and background effects. Computations are performed in the framework of the Lifshitz theory at nonzero temperature with account of analytic corrections to the proximity force approximation and of surface roughness using both the Drude and the plasma model approaches. The theory of magnetic interaction between a sphere and a plate due to domain structure of their surfaces is developed for both out-of-plane and in-plane magnetizations in the absence and in the presence of spontaneous magnetization. It is shown that in all cases the magnetic contribution to the measured force gradients is much smaller than the total experimental error. The comparison between experiment and theory is done using the rigorous statistical method. It is shown that the theoretical approach taking into account dissipation of free electrons is excluded by the data at a 95% confidence level. The approach neglecting dissipation is confirmed by the data at more than 90% confidence level. We prove that the results of experiments with Ni-Ni, Ni-Au and Au-Au surfaces taken together cannot be reconciled with the approach including free electrons dissipation by the introduction of any unaccounted background force, either attractive or repulsive.
△ Less
Submitted 23 March, 2014; v1 submitted 25 September, 2013;
originally announced September 2013.
-
Casimir interaction at liquid nitrogen temperature: Comparison between experiment and theory
Authors:
R. Castillo-Garza,
J. Xu,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We have measured the normalized gradient of the Casimir force between Au-coated surfaces of the sphere and the plate and equivalent Casimir pressure between two parallel Au plates at T=77K. These measurements have been performed by means of dynamic force microscope adapted for operating at low temperatures in the frequency shift technique. It was shown that the measurement results at T=77K are in…
▽ More
We have measured the normalized gradient of the Casimir force between Au-coated surfaces of the sphere and the plate and equivalent Casimir pressure between two parallel Au plates at T=77K. These measurements have been performed by means of dynamic force microscope adapted for operating at low temperatures in the frequency shift technique. It was shown that the measurement results at T=77K are in a very good agreement with those at T=300K and with computations at T=77K using both theoretical approaches to the thermal Casimir force proposed in the literature. No thermal effect in the Casimir pressure was observed in the limit of experimental errors with the increase of temperature from T=77K to T=300K. Taking this into account, we have discussed the possible role of patch potentials in the comparison between measured and calculated Casimir pressures.
△ Less
Submitted 23 July, 2013;
originally announced July 2013.
-
Constraints on corrections to Newtonian gravity from two recent measurements of the Casimir interaction between metallic surfaces
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
We obtain constraints on parameters of the Yukawa-type corrections to Newton's gravitational law from measurements of the gradient of the Casimir force between surfaces coated with ferromagnetic metal Ni and from measurements of the Casimir force between Au-coated sinusoidally corrugated surfaces at various angles between corrugations. It is shown that constraints following from the experiment wit…
▽ More
We obtain constraints on parameters of the Yukawa-type corrections to Newton's gravitational law from measurements of the gradient of the Casimir force between surfaces coated with ferromagnetic metal Ni and from measurements of the Casimir force between Au-coated sinusoidally corrugated surfaces at various angles between corrugations. It is shown that constraints following from the experiment with magnetic surfaces are slightly weaker than currently available strongest constraints, but benefit from increased reliability and independence of systematic effects.The constraints derived from the experiment with corrugated surfaces within the interaction region from 11.6 to 29.2\,nm are stronger up to a factor of 4 than the strongest constraints derived from other experiments. The possibility of further strengthening of constraints on non-Newtonian gravity by using the configurations with corrugated boundaries is proposed.
△ Less
Submitted 20 June, 2013;
originally announced June 2013.
-
Measuring the Casimir force gradient from graphene on a SiO_2 substrate
Authors:
A. A. Banishev,
H. Wen,
J. Xu,
R. K. Kawakami,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
The gradient of the Casimir force between a Si-SiO${}_2$-graphene substrate and an Au-coated sphere is measured by means of a dynamic atomic force microscope operated in the frequency shift technique. It is shown that the presence of graphene leads to up to 9% increase in the force gradient at the shortest separation considered. This is in qualitative agreement with the predictions of an additive…
▽ More
The gradient of the Casimir force between a Si-SiO${}_2$-graphene substrate and an Au-coated sphere is measured by means of a dynamic atomic force microscope operated in the frequency shift technique. It is shown that the presence of graphene leads to up to 9% increase in the force gradient at the shortest separation considered. This is in qualitative agreement with the predictions of an additive theory using the Dirac model of graphene.
△ Less
Submitted 27 May, 2013; v1 submitted 28 January, 2013;
originally announced January 2013.
-
Demonstration of Angle Dependent Casimir Force Between Corrugations
Authors:
A. A. Banishev,
J. Wagner,
T. Emig,
R. Zandi,
U. Mohideen
Abstract:
The normal Casimir force between a sinusoidally corrugated gold coated plate and a sphere was measured at various angles between the corrugations using an atomic force microscope. A strong dependence on the orientation angle of the corrugation is found. The measured forces were found to deviate from the proximity force approximation and are in agreement with the theory based on the gradient expans…
▽ More
The normal Casimir force between a sinusoidally corrugated gold coated plate and a sphere was measured at various angles between the corrugations using an atomic force microscope. A strong dependence on the orientation angle of the corrugation is found. The measured forces were found to deviate from the proximity force approximation and are in agreement with the theory based on the gradient expansion including correlation effects of geometry and material properties. We analyze the role of temperature. The obtained results open new opportunities for control of the Casimir effect in micromechanical systems.
△ Less
Submitted 3 May, 2013; v1 submitted 26 December, 2012;
originally announced December 2012.
-
Demonstration of the Casimir force between ferromagnetic surfaces of a Ni-coated sphere and a Ni-coated plate
Authors:
A. A. Banishev,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We demonstrate the Casimir interaction between two ferromagnetic boundary surfaces using the dynamic atomic force microscope. The experimental data are found to be in excellent agreement with the predictions of the Lifshitz theory for magnetic boundary surfaces combined with the plasma model approach. It is shown that for magnetic materials the role of hypothetical patch potentials is opposite to…
▽ More
We demonstrate the Casimir interaction between two ferromagnetic boundary surfaces using the dynamic atomic force microscope. The experimental data are found to be in excellent agreement with the predictions of the Lifshitz theory for magnetic boundary surfaces combined with the plasma model approach. It is shown that for magnetic materials the role of hypothetical patch potentials is opposite to that required for reconciliation of the data with the Drude model.
△ Less
Submitted 29 March, 2013; v1 submitted 7 November, 2012;
originally announced November 2012.
-
Constraints on non-Newtonian gravity and light elementary particles from measurements of the Casimir force by means of dynamic AFM
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
We derive constraints on corrections to Newtonian gravity of the Yukawa type and light elementary particles from two recently performed measurements of the gradient of the Casimir force. In the first measurement the configuration of two Au surfaces has been used, whereas in the second a nonmagnetic metal Au interacted with a magnetic metal Ni. In these configurations one arrives at different, resp…
▽ More
We derive constraints on corrections to Newtonian gravity of the Yukawa type and light elementary particles from two recently performed measurements of the gradient of the Casimir force. In the first measurement the configuration of two Au surfaces has been used, whereas in the second a nonmagnetic metal Au interacted with a magnetic metal Ni. In these configurations one arrives at different, respectively, similar theoretical predictions for the Casimir force when the competing theoretical approaches are employed. Nevertheless, we demonstrate that the constraints following from both experiments are in mutual agreement and in line with constraints obtained from earlier measurements. This confirms the reliability of constraints on non-Newtonian gravity obtained from measurements of the Casimir force.
△ Less
Submitted 1 September, 2012;
originally announced September 2012.
-
How to modify the van der Waals and Casimir forces without change of dielectric permittivity
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
We propose a new experiment on measuring the Casimir force and its gradient between an Au-coated sphere and two different plates made of doped semiconductors. The concentrations of charge carriers in the plates are chosen slightly below and above the critical density at which the Mott-Anderson insulator-metal transition occurs. We calculate changes in the Casimir force and the Casimir pressure due…
▽ More
We propose a new experiment on measuring the Casimir force and its gradient between an Au-coated sphere and two different plates made of doped semiconductors. The concentrations of charge carriers in the plates are chosen slightly below and above the critical density at which the Mott-Anderson insulator-metal transition occurs. We calculate changes in the Casimir force and the Casimir pressure due to the insulator-metal transition using the standard Lifshitz theory and the phenomenological approach neglecting the contribution of free charge carriers in the dielectric permittivity of insulator materials (this approach was recently supported by the measurement data of several experiments). It is demonstrated that for the special selection of semiconductor materials (S- or Se-doped Si, B-doped diamond) calculation results using both theoretical approaches differ significantly and the predicted effects are easily detectable using the existing laboratory setups. In the case that the prediction of the phenomenological approach is confirmed, this would open opportunities to modify the van der Waals and Casimir forces with almost no change of room-temperature dielectric permittivity.
△ Less
Submitted 29 August, 2012;
originally announced August 2012.
-
Measurement of the gradient of the Casimir force between a nonmagnetic sphere and a magnetic plate
Authors:
A. A. Banishev,
C. -C. Chang,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We measured the gradient of the Casimir force between an Au sphere and a plate made of ferromagnetic metal (Ni). It is demonstrated that the magnetic properties influence the force magnitude. This opens prospective opportunities for the control of the Casimir force in nanotechnology and for obtaining Casimir repulsion by using ferromagnetic dielectrics.
We measured the gradient of the Casimir force between an Au sphere and a plate made of ferromagnetic metal (Ni). It is demonstrated that the magnetic properties influence the force magnitude. This opens prospective opportunities for the control of the Casimir force in nanotechnology and for obtaining Casimir repulsion by using ferromagnetic dielectrics.
△ Less
Submitted 4 May, 2012;
originally announced May 2012.
-
A Discrete Two-Dimensional Model of a Loaded Cantilever Influenced by Time-Dependent Forces
Authors:
Gennady P. Berman,
Vyacheslav N. Gorshkov,
Vasily V. Kuzmenko,
Umar Mohideen
Abstract:
We developed a discrete two-dimensional model of a cantilever which incorporates the effects of inhomogeneity, the geometry of an attached particle, and the influence of external time-dependent forces. We provide a comparison between the solutions for our discrete model and its continuous limit. The rotational-vibrational mode is studied in detail. The results of numerical simulations demonstrate…
▽ More
We developed a discrete two-dimensional model of a cantilever which incorporates the effects of inhomogeneity, the geometry of an attached particle, and the influence of external time-dependent forces. We provide a comparison between the solutions for our discrete model and its continuous limit. The rotational-vibrational mode is studied in detail. The results of numerical simulations demonstrate usefulness of our model for many applications when a cantilever has a complicated geometry and is affected by time-depended and distributed external forces.
△ Less
Submitted 16 April, 2012;
originally announced April 2012.
-
Gradient of the Casimir force between Au surfaces of a sphere and a plate measured using atomic force microscope in a frequency shift technique
Authors:
C. -C. Chang,
A. A. Banishev,
R. Castillo-Garza,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We present measurement results for the gradient of the Casimir force between an Au-coated sphere and an Au-coated plate obtained by means of an atomic force microscope operated in a frequency shift technique. This experiment was performed at a pressure of 3x10^{-8} Torr with hollow glass sphere of 41.3 mcm radius. Special attention is paid to electrostatic calibrations including the problem of ele…
▽ More
We present measurement results for the gradient of the Casimir force between an Au-coated sphere and an Au-coated plate obtained by means of an atomic force microscope operated in a frequency shift technique. This experiment was performed at a pressure of 3x10^{-8} Torr with hollow glass sphere of 41.3 mcm radius. Special attention is paid to electrostatic calibrations including the problem of electrostatic patches. All calibration parameters are shown to be separation-independent after the corrections for mechanical drift are included. The gradient of the Casimir force was measured in two ways with applied compensating voltage to the plate and with different applied voltages and subsequent subtraction of electric forces. The obtained mean gradients are shown to be in mutual agreement and in agreement with previous experiments performed using a micromachined oscillator. The obtained data are compared with theoretical predictions of the Lifshitz theory including corrections beyond the proximity force approximation. An independent comparison with no fitting parameters demonstrated that the Drude model approach is excluded by the data at a 67% confidence level over the separation region from 235 to 420 nm. The theoretical approach using the generalized plasma-like model is shown to be consistent with the data over the entire measurement range. Corrections due to the nonlinearity of oscillator are calculated and the application region of the linear regime is determined. A conclusion is made that the results of several performed experiments call for a thorough analysis of the basics of the theory of dispersion forces.
△ Less
Submitted 14 April, 2012;
originally announced April 2012.
-
Collective charge fluctuations and Casimir interactions for quasi one-dimensional metals
Authors:
Ehsan Noruzifar,
Thorsten Emig,
Umar Mohideen,
Roya Zandi
Abstract:
We investigate the Casimir interaction between two parallel metallic cylinders and between a metallic cylinder and plate. The material properties of the metallic objects are implemented by the plasma, Drude and perfect metal model dielectric functions. We calculate the Casimir interaction numerically at all separation distances and analytically at large separations. The large-distance asymptotic i…
▽ More
We investigate the Casimir interaction between two parallel metallic cylinders and between a metallic cylinder and plate. The material properties of the metallic objects are implemented by the plasma, Drude and perfect metal model dielectric functions. We calculate the Casimir interaction numerically at all separation distances and analytically at large separations. The large-distance asymptotic interaction between one plasma cylinder parallel to another plasma cylinder or plate does not depend on the material properties, but for a Drude cylinder it depends on the dc conductivity $σ$. At intermediate separations, for plasma cylinders the asymptotic interaction depends on the plasma wave length $λ_{\rm p}$ while for Drude cylinders the Casimir interaction can become independent of the material properties. We confirm the analytical results by the numerics and show that at short separations, the numerical results approach the proximity force approximation.
△ Less
Submitted 27 March, 2012;
originally announced March 2012.
-
Observation of reduction in Casimir force without change of dielectric permittivity
Authors:
A. A. Banishev,
C. -C. Chang,
R. Castillo-Garza,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
Additional information is provided on the effect of the significant (up to 35%) reduction in the magnitude of the Casimir force between an Au-coated sphere and an indium tin oxide film which was observed after UV treatment of the latter. A striking feature of this effect is that the reduction is not accompanied with a corresponding variation of the dielectric permittivity, as confirmed by direct e…
▽ More
Additional information is provided on the effect of the significant (up to 35%) reduction in the magnitude of the Casimir force between an Au-coated sphere and an indium tin oxide film which was observed after UV treatment of the latter. A striking feature of this effect is that the reduction is not accompanied with a corresponding variation of the dielectric permittivity, as confirmed by direct ellipsometry measurements. The measurement data are compared with computations using the Lifshitz theory. It is shown that the data for the untreated sample are in a very good agreement with theory taking into account the free charge carriers in the indium tin oxide. The data for the UV-treated sample exclude the theoretical results obtained with account of free charge carriers. These data are found to be in a very good agreement with theory disregarding the free charge carriers in an indium tin oxide film. A possible theoretical explanation of our observations as a result of phase transition of indium tin oxide from metallic to dielectric state is discussed in comparison with other related experiments.
△ Less
Submitted 2 February, 2012;
originally announced February 2012.
-
Modifying the Casimir force between indium tin oxide film and Au sphere
Authors:
A. A. Banishev,
C. -C. Chang,
R. Castillo-Garza,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We present complete results of the experiment on measuring the Casimir force between an Au-coated sphere and an untreated or, alternatively, UV-treated indium tin oxide film deposited on a quartz substrate. Measurements were performed using an atomic force microscope in a high vacuum chamber. The measurement system was calibrated electrostatically. Special analysis of the systematic deviations is…
▽ More
We present complete results of the experiment on measuring the Casimir force between an Au-coated sphere and an untreated or, alternatively, UV-treated indium tin oxide film deposited on a quartz substrate. Measurements were performed using an atomic force microscope in a high vacuum chamber. The measurement system was calibrated electrostatically. Special analysis of the systematic deviations is performed, and respective corrections in the calibration parameters are introduced. The corrected parameters are free from anomalies discussed in the literature. The experimental data for the Casimir force from two measurement sets for both untreated and UV-treated samples are presented. The experimental errors are determined at a 95% confidence level. It is demonstrated that the UV treatment of an I TO plate results in a significant decrease in the magnitude of the Casimir force (from 21% to 35% depending on separation). However, ellipsometry measurements of the imaginary parts of dielectric permittivities of the untreated and UV-treated samples did not reveal any significant differences. The experimental data are compared with computations in the framework of the Lifshitz theory. It is found that the data for the untreated sample are in a very good agreement with theoretical results taking into account the free charge carriers in an ITO film. For the UV-treated sample the data exclude the theoretical results obtained with account of free charge carriers. These data are in a very good agreement with computations disregarding the contribution of free carriers. According to the explanation provided, this is caused by the phase transition of the ITO film from metallic to dielectric state caused by the UV treatment. Possible applications of the discovered phenomenon in nanotechnology are discussed.
△ Less
Submitted 26 January, 2012;
originally announced January 2012.
-
Reduction of the Casimir force from indium tin oxide film by UV treatment
Authors:
C. C. Chang,
A. A. Banishev,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
A significant decrease in the magnitude of the Casimir force (from 21% to 35%) was observed after an indium tin oxide (ITO) sample interacting with an Au sphere was subjected to the UV treatment. Measurements were performed by using an atomic force microscope (AFM) in high vacuum. The experimental results are compared with theory, and a hypothetical explanation for the observed phenomenon is propo…
▽ More
A significant decrease in the magnitude of the Casimir force (from 21% to 35%) was observed after an indium tin oxide (ITO) sample interacting with an Au sphere was subjected to the UV treatment. Measurements were performed by using an atomic force microscope (AFM) in high vacuum. The experimental results are compared with theory, and a hypothetical explanation for the observed phenomenon is proposed.
△ Less
Submitted 3 August, 2011;
originally announced August 2011.
-
Control of the Casimir Force Using Semiconductor Test Bodies
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
We describe experimental and related theoretical work on the measurement of the Casimir force using semiconductor test bodies. This field of research started in 2005 and several important and interesting results have already been obtained. Specifically, the Casimir force or its gradient were measured in the configuration of an Au-coated sphere and different semiconductor surfaces. It was found tha…
▽ More
We describe experimental and related theoretical work on the measurement of the Casimir force using semiconductor test bodies. This field of research started in 2005 and several important and interesting results have already been obtained. Specifically, the Casimir force or its gradient were measured in the configuration of an Au-coated sphere and different semiconductor surfaces. It was found that the force magnitude depends significantly on the replacement of the metal with a semiconductor and on the concentration of charge carriers in the semiconductor material. Special attention is paid to the experiment on the optical modulation of the Casimir force. In this experiment the difference Casimir force between an Au-coated sphere and Si plate in the presence and in the absence of laser light was measured. Possible applications of this experiment are discussed, specifically, for the realization of the pulsating Casimir force in three-layer systems. Theoretical problems arising from the comparison of the experimental data for the difference Casimir force with the Lifshitz theory are analyzed. We consider the possibility to control the magnitude of the Casimir force in phase transitions of semiconductor materials. Experiments on measuring the Casimir force gradient between an Au-coated sphere and Si plate covered with rectangular corrugations of different character are also described. Here, we discuss the interplay between the material properties and nontrivial geometry and the applicability of the proximity force approximation. The review contains comparison between different experiments and analysis of their advantages and disadvantages.
△ Less
Submitted 9 April, 2011;
originally announced April 2011.
-
Impact of surface imperfections on the Casimir force for lenses of centimeter-size curvature radii
Authors:
V. B. Bezerra,
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko,
C. Romero
Abstract:
The impact of imperfections, which are always present on surfaces of lenses with centimeter-size curvature radii, on the Casimir force in the lens-plate geometry is investigated. It is shown that the commonly used formulation of the proximity force approximation is inapplicable for spherical lenses with surface imperfections, such as bubbles and pits. More general expressions for the Casimir force…
▽ More
The impact of imperfections, which are always present on surfaces of lenses with centimeter-size curvature radii, on the Casimir force in the lens-plate geometry is investigated. It is shown that the commonly used formulation of the proximity force approximation is inapplicable for spherical lenses with surface imperfections, such as bubbles and pits. More general expressions for the Casimir force are derived that take surface imperfections into account. Using these expressions we show that surface imperfections can both increase and decrease the magnitude of the Casimir force up to a few tens of percent when compared with the case of a perfectly spherical lens. We demonstrate that the Casimir force between a perfectly spherical lens and a plate described by the Drude model can be made approximately equal to the force between a sphere with some surface imperfection and a plate described by the plasma model, and vice versa. In the case of a metallic sphere and semiconductor plate, approximately the same Casimir forces are obtained for four different descriptions of charge carriers in the semiconductor if appropriate surface imperfections on the lens surface are present. The conclusion is made that there is a fundamental problem in the interpretation of measurement data for the Casimir force, obtained by using spherical lenses of centimeter-size radii, and their comparison with theory.
△ Less
Submitted 10 January, 2011;
originally announced January 2011.
-
Fluctuation-induced forces between inclusions in a fluid membrane under tension
Authors:
Hsiang-Ku Lin,
Roya Zandi,
Umar Mohideen,
Leonid P. Pryadko
Abstract:
We discuss the fluctuation-induced force, a finite-temperature analog of the Casimir force, between two inclusions embedded in a fluid membrane under tension. We suggest a method to calculate this Casimir interaction in the most general case, where membrane fluctuations are governed by the combined action of surface tension, bending modulus, and the Gaussian rigidity. We find that the surface tens…
▽ More
We discuss the fluctuation-induced force, a finite-temperature analog of the Casimir force, between two inclusions embedded in a fluid membrane under tension. We suggest a method to calculate this Casimir interaction in the most general case, where membrane fluctuations are governed by the combined action of surface tension, bending modulus, and the Gaussian rigidity. We find that the surface tension strongly modifies the power law in the separation dependence of the Casimir interaction. This results in a strong suppression of the Casimir force at separations beyond a characteristic length, which could affect protein aggregation dynamics in cell membranes.
△ Less
Submitted 23 September, 2011; v1 submitted 3 September, 2010;
originally announced September 2010.
-
Quantum and thermal Casimir interaction between a sphere and a plate: Comparison of Drude and plasma models
Authors:
Roya Zandi,
Thorsten Emig,
Umar Mohideen
Abstract:
We calculate the Casimir interaction between a sphere and a plate, both described by the plasma model, the Drude model, or generalizations of the two models. We compare the results at both zero and finite temperatures. At asymptotically large separations we obtain analytical results for the interaction that reveal a non-universal, i.e., material dependent interaction for the plasma model. The la…
▽ More
We calculate the Casimir interaction between a sphere and a plate, both described by the plasma model, the Drude model, or generalizations of the two models. We compare the results at both zero and finite temperatures. At asymptotically large separations we obtain analytical results for the interaction that reveal a non-universal, i.e., material dependent interaction for the plasma model. The latter result contains the asymptotic interaction for Drude metals and perfect reflectors as different but universal limiting cases. This observation is related to the screening of a static magnetic field by a London superconductor. For small separations we find corrections to the proximity force approximation (PFA) that support correlations between geometry and material properties that are not captured by the Lifshitz theory. Our results at finite temperatures reveal for Drude metals a non-monotonic temperature dependence of the Casimir free energy and a negative entropy over a sizeable range of separations.
△ Less
Submitted 27 February, 2010;
originally announced March 2010.
-
Lateral Casimir force between sinusoidally corrugated surfaces: Asymmetric profiles, deviations from the proximity force approximation and comparison with exact theory
Authors:
H. -C. Chiu,
G. L. Klimchitskaya,
V. N. Marachevsky,
V. M. Mostepanenko,
U. Mohideen
Abstract:
The lateral Casimir force, which arises between aligned sinusoidally corrugated surfaces of a sphere and a plate, was measured for the case of a small corrugation period beyond the applicability region of the proximity force approximation. The increased amplitudes of the corrugations on both the sphere and the plate allowed observation of an asymmetry of the lateral Casimir force, i.e., deviatio…
▽ More
The lateral Casimir force, which arises between aligned sinusoidally corrugated surfaces of a sphere and a plate, was measured for the case of a small corrugation period beyond the applicability region of the proximity force approximation. The increased amplitudes of the corrugations on both the sphere and the plate allowed observation of an asymmetry of the lateral Casimir force, i.e., deviation of its profile from a perfect sine function. The dependences of the lateral force on the phase shift between the corrugations on both test bodies were measured at different separations in two sets of measurements with different amplitudes of corrugations on the sphere. The maximum magnitude of the lateral force as a function of separation was also measured in two successive experiments. All measurement data were compared with the theoretical approach using the proximity force approximation and with the exact theory based on Rayleigh expansions with no fitting parameters. In both cases real material properties of the test bodies and nonzero temperature were taken into account. The data were found to be in a good agreement with the exact theory but deviate significantly from the predictions of the proximity force approximation approach. This provides the quantitative confirmation for the observation of diffraction-type effects that are disregarded within the PFA approach. Possible applications of the phenomenon of the lateral Casimir force in nanotechnology for the operation of micromachines are discussed.
△ Less
Submitted 20 February, 2010;
originally announced February 2010.
-
An IR Photodetector Using an Optically Cooled Micromirror as a Light Pressure Sensor
Authors:
Gennady P. Berman,
Boris M. Chernobrod,
Alan R. Bishop,
Umar Mohideen
Abstract:
We consider mid-infrared (5 to 25 micrometers), optically cooled detectors based on a microcantilever sensor of the radiation pressure. A significant enhancement of sensitivity is achieved due the combination of low effective temperature (10 K), non-absorption detection, and a high quality optical microcavity. Applications to spectrometry are examined. It is shown that an optically cooled radiat…
▽ More
We consider mid-infrared (5 to 25 micrometers), optically cooled detectors based on a microcantilever sensor of the radiation pressure. A significant enhancement of sensitivity is achieved due the combination of low effective temperature (10 K), non-absorption detection, and a high quality optical microcavity. Applications to spectrometry are examined. It is shown that an optically cooled radiation pressure sensor potentially has a sensitivity an order of magnitude better than the best conventional uncooled detectors.
△ Less
Submitted 21 December, 2009;
originally announced December 2009.
-
Demonstration of the asymmetric lateral Casimir force between corrugated surfaces in the nonadditive regime
Authors:
H. -C. Chiu,
G. L. Klimchitskaya,
V. N. Marachevsky,
V. M. Mostepanenko,
U. Mohideen
Abstract:
The measurement of the lateral Casimir force between two aligned sinusoidally corrugated Au-coated surfaces has been performed in the nonadditive regime. The use of deeper corrugations also allowed to demonstrate an asymmetry in the phase dependences of the lateral Casimir force, as predicted earlier. The measurement data are found to be in excellent agreement with the exact theoretical results…
▽ More
The measurement of the lateral Casimir force between two aligned sinusoidally corrugated Au-coated surfaces has been performed in the nonadditive regime. The use of deeper corrugations also allowed to demonstrate an asymmetry in the phase dependences of the lateral Casimir force, as predicted earlier. The measurement data are found to be in excellent agreement with the exact theoretical results computed at T=300 K including effect of real material properties. The deviations between the exact theory and the proximity force approximation are quantified. The obtained results are topical for applications in nanomachines.
△ Less
Submitted 11 September, 2009;
originally announced September 2009.
-
Why Screening Effects Do Not Influence the Casimir Force
Authors:
V. M. Mostepanenko,
R. S. Decca,
E. Fischbach,
B. Geyer,
G. L. Klimchitskaya,
D. E. Krause,
D. Lopez,
U. Mohideen
Abstract:
The Lifshitz theory of dispersion forces leads to thermodynamic and experimental inconsistencies when the role of drifting charge carriers is included in the model of the dielectric response. Recently modified reflection coefficients were suggested that take into account screening effects and diffusion currents. We demonstrate that this theoretical approach leads to a violation of the third law…
▽ More
The Lifshitz theory of dispersion forces leads to thermodynamic and experimental inconsistencies when the role of drifting charge carriers is included in the model of the dielectric response. Recently modified reflection coefficients were suggested that take into account screening effects and diffusion currents. We demonstrate that this theoretical approach leads to a violation of the third law of thermodynamics (Nernst's heat theorem) for a wide class of materials and is excluded by the data from two recent experiments. The physical reason for its failure is explained by the violation of thermal equilibrium, which is the fundamental applicability condition of the Lifshitz theory, in the presence of drift and diffusion currents.
△ Less
Submitted 6 May, 2009;
originally announced May 2009.
-
Capacitance measurements and electrostatic calibrations in experiments measuring the Casimir force
Authors:
R. S. Decca,
E. Fischbach,
G. L. Klimchitskaya,
D. E. Krause,
D. López,
U. Mohideen,
V. M. Mostepanenko
Abstract:
We compare the results of capacitance measurements in the lens-plane and sphere-plane configurations with theoretical predictions from various models of a spherical surface. It is shown that capacitance measurements are incapable of discriminating between models of perfect and modified spherical surfaces in an experiment demonstrating the anomalous scaling law for the electric force. Claims to the…
▽ More
We compare the results of capacitance measurements in the lens-plane and sphere-plane configurations with theoretical predictions from various models of a spherical surface. It is shown that capacitance measurements are incapable of discriminating between models of perfect and modified spherical surfaces in an experiment demonstrating the anomalous scaling law for the electric force. Claims to the contrary in the recent literature are explained by the use of irregular comparison. The data from capacitance measurements in an experiment measuring the Casimir force using a micromechanical torsional oscillator are shown to be in excellent agreement with theoretical predictions using the model of a perfect spherical surface.
△ Less
Submitted 27 September, 2011; v1 submitted 29 April, 2009;
originally announced April 2009.
-
The Casimir force between real materials: experiment and theory
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
The physical origin of the Casimir force is connected with the existence of zero-point and thermal fluctuations. The Casimir effect is very general and finds applications in various fields of physics. This review is limited to the rapid progress at the intersection of experiment and theory that has been achieved in the last few years. It includes a critical assessment of the proposed approaches…
▽ More
The physical origin of the Casimir force is connected with the existence of zero-point and thermal fluctuations. The Casimir effect is very general and finds applications in various fields of physics. This review is limited to the rapid progress at the intersection of experiment and theory that has been achieved in the last few years. It includes a critical assessment of the proposed approaches to the resolution of the puzzles arising in the applications of the Lifshitz theory of the van der Waals and Casimir forces to real materials. All the primary experiments on the measurement of the Casimir force between macroscopic bodies and the Casimir-Polder force between an atom and a wall that have been performed in the last decade are reviewed, including the theory needed for their interpretation. The methodology for the comparison between experiment and theory in the force-distance measurements is presented. The experimental and theoretical results described here provide a deeper understanding of the phenomenon of dispersion forces in real materials and offer guidance for the application of Lifshitz theory for the interpretation of the measurement results.
△ Less
Submitted 23 February, 2009;
originally announced February 2009.
-
Comment on "Application of the Lifshitz theory to poor conductors" [arXiv:0809.3901]
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
Recent Letter by V. B. Svetovoy [Phys. Rev. Lett. v.101, 163603 (2008), arXiv:0809.3901] claims that the Lifshitz theory combined with spatially nonlocal dielectric permittivities is consistent with the experimental data and Nernst's theorem. We prove that these claims are incorrect. They are based on irregular comparison with the data and misinterpretation of relevant physical quantities.
Recent Letter by V. B. Svetovoy [Phys. Rev. Lett. v.101, 163603 (2008), arXiv:0809.3901] claims that the Lifshitz theory combined with spatially nonlocal dielectric permittivities is consistent with the experimental data and Nernst's theorem. We prove that these claims are incorrect. They are based on irregular comparison with the data and misinterpretation of relevant physical quantities.
△ Less
Submitted 17 October, 2008;
originally announced October 2008.
-
Comment on "Contribution of drifting carriers to the Casimir-Lifshitz and Casimir-Polder interactions with semiconductor materials"
Authors:
R. S. Decca,
E. Fischbach,
B. Geyer,
G. L. Klimchitskaya,
D. E. Krause,
D. Lopez,
U. Mohideen,
V. M. Mostepanenko
Abstract:
Recently D. A. R. Dalvit and S. K. Lamoreaux arXiv:0805.1676 [Phys. Rev. Lett. v.101, 163203 (2008)] suggested the modification of the reflection coefficients in the Lifshitz theory taking into account the screening effects and diffusion currents. We demonstrate that the suggested modification is thermodynamically and experimentally inconsistent.
Recently D. A. R. Dalvit and S. K. Lamoreaux arXiv:0805.1676 [Phys. Rev. Lett. v.101, 163203 (2008)] suggested the modification of the reflection coefficients in the Lifshitz theory taking into account the screening effects and diffusion currents. We demonstrate that the suggested modification is thermodynamically and experimentally inconsistent.
△ Less
Submitted 17 March, 2009; v1 submitted 17 October, 2008;
originally announced October 2008.
-
Comment on "Thermal Lifshitz force between an atom and a conductor with a small density of carriers"
Authors:
B. Geyer,
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
We demonstrate that the generalization of the Lifshitz theory proposed by L. P. Pitaevskii arXiv:0801.0656 [Phys. Rev. Lett. v.101, 163202 (2008)] violates the Nernst heat theorem for many dielectric materials and is experimentally inconsistent.
We demonstrate that the generalization of the Lifshitz theory proposed by L. P. Pitaevskii arXiv:0801.0656 [Phys. Rev. Lett. v.101, 163202 (2008)] violates the Nernst heat theorem for many dielectric materials and is experimentally inconsistent.
△ Less
Submitted 17 March, 2009; v1 submitted 17 October, 2008;
originally announced October 2008.
-
Comment on "Anomalies in electrostatic calibration for the measurement of the Casimir force in a sphere-plane geometry"
Authors:
R. S. Decca,
E. Fischbach,
G. L. Klimchitskaya,
D. E. Krause,
D. López,
U. Mohideen,
V. M. Mostepanenko
Abstract:
Recently W. J. Kim, M. Brown-Hayes, D. A. R. Dalvit, J. H. Brownell, and R. Onofrio [Phys. Rev. A, v.78, 036102(R) (2008)] performed electrostatic calibrations for a plane plate above a centimeter-size spherical lens at separations down to 20-30 nm and observed "anomalous behavior". It was found that the gradient of the electrostatic force does not depend on separation as predicted on the basis…
▽ More
Recently W. J. Kim, M. Brown-Hayes, D. A. R. Dalvit, J. H. Brownell, and R. Onofrio [Phys. Rev. A, v.78, 036102(R) (2008)] performed electrostatic calibrations for a plane plate above a centimeter-size spherical lens at separations down to 20-30 nm and observed "anomalous behavior". It was found that the gradient of the electrostatic force does not depend on separation as predicted on the basis of a pure Coulombian contribution. Some hypotheses which could potentially explain the deviation from the expected behavior were considered, and qualitative arguments in favor of the influence of patch surface potentials were presented. We demonstrate that for the large lenses at separations of a few tens nanometers from the plate, the electrostatic force law used by the authors is not applicable due to possible deviations of the mechanically polished and ground lens surface from a perfect spherical shape. A model is proposed which explains the observed "anomalous behavior" using the standard Coulombian force.
△ Less
Submitted 21 September, 2008;
originally announced September 2008.
-
Comment on "Possible resolution of the Casimir force finite temperature correction "controversies""
Authors:
R. S. Decca,
E. Fischbach,
B. Geyer,
G. L. Klimchitskaya,
D. E. Krause,
D. López,
U. Mohideen,
V. M. Mostepanenko
Abstract:
The recently suggested modification of the transverse electric contribution to the Lifshitz formula (S. K. Lamoreaux, arXiv:0801.1283) is discussed. We show that this modification is inconsistent with the data of two precise experiments, and violates the Nernst heat theorem. The preprint's suggestion concerning the resolution of the "apparent violation of the Third Law of Thermodynamics" is show…
▽ More
The recently suggested modification of the transverse electric contribution to the Lifshitz formula (S. K. Lamoreaux, arXiv:0801.1283) is discussed. We show that this modification is inconsistent with the data of two precise experiments, and violates the Nernst heat theorem. The preprint's suggestion concerning the resolution of the "apparent violation of the Third Law of Thermodynamics" is shown to be incorrect.
△ Less
Submitted 29 March, 2008;
originally announced March 2008.
-
Experimental procedures for precision measurements of the Casimir force with an Atomic Force Microscope
Authors:
Hsiang-Chih Chiu,
Chia-Cheng Chang,
R. Castillo-Garza,
F. Chen,
U. Mohideen
Abstract:
Experimental methods and procedures required for precision measurements of the Casimir force are presented. In particular, the best practices for obtaining stable cantilevers, calibration of the cantilever, correction of thermal and mechanical drift, measuring the contact separation, sphere radius and the roughness are discussed.
Experimental methods and procedures required for precision measurements of the Casimir force are presented. In particular, the best practices for obtaining stable cantilevers, calibration of the cantilever, correction of thermal and mechanical drift, measuring the contact separation, sphere radius and the roughness are discussed.
△ Less
Submitted 25 February, 2008;
originally announced February 2008.
-
Casimir-Polder force between an atom and a dielectric plate: thermodynamics and experiment
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
The low-temperature behavior of the Casimir-Polder free energy and entropy for an atom near a dielectric plate are found on the basis of the Lifshitz theory. The obtained results are shown to be thermodynamically consistent if the dc conductivity of the plate material is disregarded. With inclusion of dc conductivity, both the standard Lifshitz theory (for all dielectrics) and its generalization…
▽ More
The low-temperature behavior of the Casimir-Polder free energy and entropy for an atom near a dielectric plate are found on the basis of the Lifshitz theory. The obtained results are shown to be thermodynamically consistent if the dc conductivity of the plate material is disregarded. With inclusion of dc conductivity, both the standard Lifshitz theory (for all dielectrics) and its generalization taking into account screening effects (for a wide range of dielectrics) violate the Nernst heat theorem. The inclusion of the screening effects is also shown to be inconsistent with experimental data of Casimir force measurements. The physical reasons for this inconsistency are elucidated.
△ Less
Submitted 16 September, 2008; v1 submitted 19 February, 2008;
originally announced February 2008.
-
Comment on ``Precision measurement of the Casimir-Lifshitz force in a fluid''
Authors:
B. Geyer,
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
Recently J.N. Munday and F. Capasso [Phys. Rev. A {\bf 75}, 060102(R) (2007); arXiv:0705.3793] claimed that they have performed a precision measurement of the Casimir force between a sphere and a plate coated with Au, both immersed in ethanol. The measurement results were claimed to be consistent with the Lifshitz theory. We demonstrate that the calculation of the Casimir force between the smoot…
▽ More
Recently J.N. Munday and F. Capasso [Phys. Rev. A {\bf 75}, 060102(R) (2007); arXiv:0705.3793] claimed that they have performed a precision measurement of the Casimir force between a sphere and a plate coated with Au, both immersed in ethanol. The measurement results were claimed to be consistent with the Lifshitz theory. We demonstrate that the calculation of the Casimir force between the smooth bodies following the authors prescription has a discrepancy up to 25% with respect to authors result. We show also that the attractive electrostatic force only due to the surface potential differences was underestimated by a factor of 590 and the charge double layer interaction was not taken into account. All this leads to the conclusion that the results of this experiment are in fact uncertain.
△ Less
Submitted 16 November, 2007; v1 submitted 11 August, 2007;
originally announced August 2007.
-
Control of the Casimir force by the modification of dielectric properties with light
Authors:
F. Chen,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
The experimental demonstration of the modification of the Casimir force between a gold coated sphere and a single-crystal Si membrane by light pulses is performed. The specially designed and fabricated Si membrane was irradiated with 514 nm laser pulses of 5 ms width in high vacuum leading to a change of the charge-carrier density. The difference in the Casimir force in the presence and in the a…
▽ More
The experimental demonstration of the modification of the Casimir force between a gold coated sphere and a single-crystal Si membrane by light pulses is performed. The specially designed and fabricated Si membrane was irradiated with 514 nm laser pulses of 5 ms width in high vacuum leading to a change of the charge-carrier density. The difference in the Casimir force in the presence and in the absence of laser radiation was measured by means of an atomic force microscope as a function of separation at different powers of the absorbed light. The total experimental error of the measured force differences at a separation of 100 nm varies from 10 to 20% in different measurements. The experimental results are compared with theoretical computations using the Lifshitz theory at both zero and laboratory temperatures. The total theoretical error determined mostly by the uncertainty in the concentration of charge carriers when the light is incident is found to be about 14% at separations less than 140 nm. The experimental data are consistent with the Lifshitz theory at laboratory temperature, if the static dielectric permittivity of high-resistivity Si in the absence of light is assumed to be finite. If the dc conductivity of high-resistivity Si in the absence of light is included into the model of dielectric response, the Lifshitz theory at nonzero temperature is shown to be experimentally inconsistent at 95% confidence. The demonstrated phenomenon of the modification of the Casimir force through a change of the charge-carrier density is topical for applications of the Lifshitz theory to real materials in fields ranging from nanotechnology and condensed matter physics to the theory of fundamental interactions.
△ Less
Submitted 30 July, 2007;
originally announced July 2007.
-
Pulsating Casimir force
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
Based on the Lifshitz theory we show that the illumination of one (Si) plate in the three-layer systems Au--ethanol--Si, Si--ethanol--Si and $α$-Al${}_2$O${}_3$--ethanol--Si with laser pulses can change the Casimir attraction to Casimir repulsion and vice versa. The proposed effect opens novel opportunities in nanotechnology to actuate the periodic movement in electro- and optomechanical microma…
▽ More
Based on the Lifshitz theory we show that the illumination of one (Si) plate in the three-layer systems Au--ethanol--Si, Si--ethanol--Si and $α$-Al${}_2$O${}_3$--ethanol--Si with laser pulses can change the Casimir attraction to Casimir repulsion and vice versa. The proposed effect opens novel opportunities in nanotechnology to actuate the periodic movement in electro- and optomechanical micromachines based entirely on the zero-point oscillations of the quantum vacuum without the action of mechanical springs.
△ Less
Submitted 18 July, 2007;
originally announced July 2007.
-
Experimental approaches to the difference in the Casimir force through the varying optical properties of boundary surface
Authors:
R. Castillo-Garza,
C. -C. Chang,
D. Jimenez,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We propose two novel experiments on the measurement of the Casimir force acting between a gold coated sphere and semiconductor plates with markedly different charge carrier densities. In the first of these experiments a patterned Si plate is used which consists of two sections of different dopant densities and oscillates in the horizontal direction below a sphere. The measurement scheme in this…
▽ More
We propose two novel experiments on the measurement of the Casimir force acting between a gold coated sphere and semiconductor plates with markedly different charge carrier densities. In the first of these experiments a patterned Si plate is used which consists of two sections of different dopant densities and oscillates in the horizontal direction below a sphere. The measurement scheme in this experiment is differential, i.e., allows the direct high-precision measurement of the difference of the Casimir forces between the sphere and sections of the patterned plate or the difference of the equivalent pressures between Au and patterned parallel plates with static and dynamic techniques, respectively. The second experiment proposes to measure the Casimir force between the same sphere and a VO${}_2$ film which undergoes the insulator-metal phase transition with the increase of temperature. We report the present status of the interferometer based variable temperature apparatus developed to perform both experiments and present the first results on the calibration and sensitivity. The magnitudes of the Casimir forces and pressures in the experimental configurations are calculated using different theoretical approaches to the description of optical and conductivity properties of semiconductors at low frequencies proposed in the literature. It is shown that the suggested experiments will aid in the resolution of theoretical problems arising in the application of the Lifshitz theory at nonzero temperature to real materials. They will also open new opportunities in nanotechnology.
△ Less
Submitted 9 May, 2007;
originally announced May 2007.
-
Kramers-Kronig relations for plasma-like permittivities and the Casimir force
Authors:
G. L. Klimchitskaya,
U. Mohideen,
V. M. Mostepanenko
Abstract:
The Kramers-Kronig relations are derived for the permittivity of the usual plasma model which neglects dissipation and of a generalized model which takes into account the interband transitions. The generalized plasma model is shown to be consistent with all precision experiments on the measurement of the Casimir force.
The Kramers-Kronig relations are derived for the permittivity of the usual plasma model which neglects dissipation and of a generalized model which takes into account the interband transitions. The generalized plasma model is shown to be consistent with all precision experiments on the measurement of the Casimir force.
△ Less
Submitted 15 March, 2007;
originally announced March 2007.
-
Comment on ``Lateral Casimir force beyond the proximity-force approximation''
Authors:
F. Chen,
U. Mohideen,
G. L. Klimchitskaya,
V. M. Mostepanenko
Abstract:
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
We demonstrate that the approach by Rodrigues et al. (PRL, v.96, 100402, 2006) to the description of the lateral Casimir force between corrugated surfaces is in disagreement with a path-integral theory by Emig et al. (PRA, v.67, 022114, 2003), and the approximations used are not appropriate for comparison to experiment.
△ Less
Submitted 6 February, 2007;
originally announced February 2007.
-
Demonstration of optically modulated dispersion forces
Authors:
F. Chen,
G. L. Klimchitskaya,
V. M. Mostepanenko,
U. Mohideen
Abstract:
We report the first experiment on the optical modulation of dispersion forces through a change of the carrier density in a Si membrane. For this purpose a high-vacuum based atomic force microscope and excitation light pulses from an Ar laser are used. The experimental results are compared with two theoretical models. The modulation of the dispersion force will find applications in optomechanical…
▽ More
We report the first experiment on the optical modulation of dispersion forces through a change of the carrier density in a Si membrane. For this purpose a high-vacuum based atomic force microscope and excitation light pulses from an Ar laser are used. The experimental results are compared with two theoretical models. The modulation of the dispersion force will find applications in optomechanical micromachines.
△ Less
Submitted 5 April, 2007; v1 submitted 12 October, 2006;
originally announced October 2006.