-
NiOx passivation in perovskite solar cells: from surface reactivity to device performance
Authors:
John Mohanraj,
Bipasa Samanta,
Osbel Almora,
Renán Escalante,
Lluis F. Marsal,
Sandra Jenatsch,
Arno Gadola,
Beat Ruhstaller,
Juan A. Anta,
Maytal Caspary Toroker,
Selina Olthof
Abstract:
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs containing NiOx hole transport layers are reporte…
▽ More
Non-stoichiometric nickel oxide (NiOx) is the only metal oxide successfully used as hole transport material in p-i-n type perovskite solar cells (PSCs). Its favorable opto-electronic properties and facile large-scale preparation methods are potentially relevant for future commercialization of PSCs, though currently low operational stability of PSCs containing NiOx hole transport layers are reported. Poorly understood degradation reactions at the interface to the perovskite are seen as cause for the inferior stability and a variety of interface passivation approaches have been shown to be effective in improving the overall solar cell performance. To gain a better understanding of the processes happening at this interface, we systematically passivated possible specific defects on NiOx with three different categories of organic/inorganic compounds. The effects on the NiOx and the perovskite (MAPbI3) were investigated using x-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and scanning electron microscopy (SEM) where we find that the structural stability and film formation can be significantly affected. In combination with Density Functional Theory (DFT) calculations, a likely origin of NiOx-perovskite degradation interactions is proposed. The surface passivated NiOx was incorporated into MAPbI3 based PSCs and its influence on overall performance, particularly operational stability, was investigated by current-voltage (J-V), impedance spectroscopy (IS), and open circuit voltage decay (OCVD) measurements. Interestingly, we find that a superior structural stability due to an interface passivation must not relate to high operational stability. The discrepancy comes from the formation of excess ions at the interface which negatively impacts all solar cell parameters.
△ Less
Submitted 15 February, 2024;
originally announced February 2024.
-
Degradation Analysis of Perovskite Solar Cells via Short-Circuit Impedance Spectroscopy: A case study on NiOx passivation
Authors:
Osbel Almora,
Pilar López-Varo,
Renán Escalante,
John Mohanraj,
Luis F Marsal,
Selina Olthof,
Juan A. Anta
Abstract:
Perovskite solar cells (PSCs) continue to be the front runner technology among emerging photovoltaic devices in terms of power conversion efficiency and application versatility. However, not only the stability but also the understanding of their ionic-electronic transport mechanisms continues to be challenging. In this work, the case study of NiOx-based inverted PSCs and the effect of different in…
▽ More
Perovskite solar cells (PSCs) continue to be the front runner technology among emerging photovoltaic devices in terms of power conversion efficiency and application versatility. However, not only the stability but also the understanding of their ionic-electronic transport mechanisms continues to be challenging. In this work, the case study of NiOx-based inverted PSCs and the effect of different interface passivating treatments on the device performance are approached. Our experiments include impedance spectroscopy (IS) measurements in short-circuit under different illumination intensities and operational stability tests under constant illumination intensity. It is found that certain surface treatments lead to more stable performance. However, protic anion donors can induce, both, an initial performance decrease and a subsequent reactivity during light exposure which apparently improves the cells performance. Our drift-diffusion simulations suggest that the modification of the interface with the hole transport material may have decrease the conductivity, as well as the ion and electron mobilities at the perovskite and the NiOx, respectively. Importantly, capacitance and resistance are shown to peak maximum and minimum values, respectively, around specific ranges of mobile ion concentration. Our results introduce a general route for characterization of degradation paths in PSCs via IS in short-circuit.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Dynamic Distortions of Quasi-2D Ruddlesden-Popper Perovskites at Elevated Temperatures: Influence on Thermal and Electronic Properties
Authors:
Raisa-Ioana Biega,
Menno Bokdam,
Kai Herrmann,
John Mohanraj,
Dominik Skyrbeck,
Mukundan Thelakkat,
Markus Retsch,
Linn Leppert
Abstract:
Ruddlesden-Popper hybrid halide perovskite are quasi-two-dimensional materials with a layered structure and structural dynamics that are determined by the interplay between the organic and inorganic layers. While their optical properties are governed by confinement effects, the atomistic origin of thermal and electronic properties of these materials is yet to be fully established. Here we combine…
▽ More
Ruddlesden-Popper hybrid halide perovskite are quasi-two-dimensional materials with a layered structure and structural dynamics that are determined by the interplay between the organic and inorganic layers. While their optical properties are governed by confinement effects, the atomistic origin of thermal and electronic properties of these materials is yet to be fully established. Here we combine computational and experimental techniques to study A$_2$PbI$_4$ (A=butylammonium (BA), phenethylammonium (PEA)) Ruddlesden-Popper perovskites and compare them with the quintessential perovskite CH$_3$NH$_3$PbI$_3$. We use first-principles density functional theory, molecular dynamics simulations based on machine-learned interatomic potentials, thermal measurements, temperature-dependent Raman spectroscopy, and ultraviolet photoelectron spectroscopy, to probe the thermal and electronic properties of these materials at elevated temperatures. Our molecular dynamics simulations demonstrate that dynamic fluctuations in the organic sublattice determine the bulk-average distortions of these materials at room-temperature, explaining significant differences in their electronic density of states close to the Fermi level. Furthermore, by analysing the organic layer dynamics in BA$_2$PbI$_4$ we provide a mechanistic explanation for the phase transition of this material at 274 K and observations from Raman measurements. Our results highlight the role of the organic interlayer for the electronic and thermal transport properties of Ruddlesden-Popper perovskites, paving the way for the design of new hybrid materials for tailored applications.
△ Less
Submitted 20 April, 2023; v1 submitted 10 March, 2023;
originally announced March 2023.
