-
How to verify the precision of density-functional-theory implementations via reproducible and universal workflows
Authors:
Emanuele Bosoni,
Louis Beal,
Marnik Bercx,
Peter Blaha,
Stefan Blügel,
Jens Bröder,
Martin Callsen,
Stefaan Cottenier,
Augustin Degomme,
Vladimir Dikan,
Kristjan Eimre,
Espen Flage-Larsen,
Marco Fornari,
Alberto Garcia,
Luigi Genovese,
Matteo Giantomassi,
Sebastiaan P. Huber,
Henning Janssen,
Georg Kastlunger,
Matthias Krack,
Georg Kresse,
Thomas D. Kühne,
Kurt Lejaeghere,
Georg K. H. Madsen,
Martijn Marsman
, et al. (20 additional authors not shown)
Abstract:
In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a firs…
▽ More
In the past decades many density-functional theory methods and codes adopting periodic boundary conditions have been developed and are now extensively used in condensed matter physics and materials science research. Only in 2016, however, their precision (i.e., to which extent properties computed with different codes agree among each other) was systematically assessed on elemental crystals: a first crucial step to evaluate the reliability of such computations. We discuss here general recommendations for verification studies aiming at further testing precision and transferability of density-functional-theory computational approaches and codes. We illustrate such recommendations using a greatly expanded protocol covering the whole periodic table from Z=1 to 96 and characterizing 10 prototypical cubic compounds for each element: 4 unaries and 6 oxides, spanning a wide range of coordination numbers and oxidation states. The primary outcome is a reference dataset of 960 equations of state cross-checked between two all-electron codes, then used to verify and improve nine pseudopotential-based approaches. Such effort is facilitated by deploying AiiDA common workflows that perform automatic input parameter selection, provide identical input/output interfaces across codes, and ensure full reproducibility. Finally, we discuss the extent to which the current results for total energies can be reused for different goals (e.g., obtaining formation energies).
△ Less
Submitted 26 May, 2023;
originally announced May 2023.
-
Charge Carrier Transport in Iron Pyrite Thin Films: Disorder Induced Variable Range Hop**
Authors:
Sudhanshu Shukla,
Sinu Mathew,
Hwan Sung Choe,
Manjusha Chugh,
Thomas D. Kuhne,
Hossein Mirhosseini,
Xiong Qihua,
Junqiao Wu,
Thirumalai Venkatesan,
Thirumany Sritharan,
Joel W. Ager
Abstract:
The origin of p-type conductivity and the mechanism responsible for low carrier mobility was investigated in pyrite (FeS2) thin films. Temperature dependent resistivity measurements were performed on polycrystalline and nanostructured thin films prepared by three different methods. Films have a high hole density and low mobility regardless of the method used for their preparation. The charge trans…
▽ More
The origin of p-type conductivity and the mechanism responsible for low carrier mobility was investigated in pyrite (FeS2) thin films. Temperature dependent resistivity measurements were performed on polycrystalline and nanostructured thin films prepared by three different methods. Films have a high hole density and low mobility regardless of the method used for their preparation. The charge transport mechanism is determined to be nearest neighbour hop** (NNH) at near room temperature with Mott-type variable range hop** (VRH) of holes via localized states occurring at lower temperatures. Density functional theory (DFT) predicts that sulfur vacancy induced localized defect states will be situated within the band gap with the charge remaining localized around the defect. The data indicate that the electronic properties including hop** transport in pyrite thin films can be correlated to sulfur vacancy related defect. The results provide insights on electronic properties of pyrite thin films and its implications for charge transport
△ Less
Submitted 20 June, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
An automated approach for develo** neural network interatomic potentials with FLAME
Authors:
Hossein Mirhosseini,
Hossein Tahmasbi,
Sai Ram Kuchana,
S. Alireza Ghasemi,
Thomas D. Kühne
Abstract:
The performance of machine learning interatomic potentials relies on the quality of the training dataset. In this work, we present an approach for generating diverse and representative training data points which initiates with \it{ab initio} calculations for bulk structures. The data generation and potential construction further proceed side-by-side in a cyclic process of training the neural netwo…
▽ More
The performance of machine learning interatomic potentials relies on the quality of the training dataset. In this work, we present an approach for generating diverse and representative training data points which initiates with \it{ab initio} calculations for bulk structures. The data generation and potential construction further proceed side-by-side in a cyclic process of training the neural network and crystal structure prediction based on the developed interatomic potentials. All steps of the data generation and potential development are performed with minimal human intervention. We show the reliability of our approach by assessing the performance of neural network potentials developed for two inorganic systems.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
Design and Fabrication of Novel Digital Transcranial Electrical Stimulator for Medical and Psychiatry Applications
Authors:
HoseinAli Jafari,
Mohammad Bagher Heydari,
Niloofar Jafari,
Hamid Mirhosseini
Abstract:
In this article, we design a novel Transcranial Electrical Stimulator for medical applications, which is very cheap and can produce the desired signals very accurately. Our fabricated stimulator generates all current signals related to Transcranial Electrical Stimulation (TES) methods, i.e. Transcranial Direct Current Stimulation (tDCS), Transcranial Pulsed Current Stimulation (tPCS), Cranial Elec…
▽ More
In this article, we design a novel Transcranial Electrical Stimulator for medical applications, which is very cheap and can produce the desired signals very accurately. Our fabricated stimulator generates all current signals related to Transcranial Electrical Stimulation (TES) methods, i.e. Transcranial Direct Current Stimulation (tDCS), Transcranial Pulsed Current Stimulation (tPCS), Cranial Electrotherapy Stimulation (CES), and Microcurrent Electrical Therapy (MET). The proposed device has been constructed of an advanced digital controller which makes it tunable. One of the major advantages of the device is its ability to generate Burst pulses.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Topological Crystalline Transition Metals: Strained W, Ta, Mo, and Nb
Authors:
Danny Thonig,
Tomáš Rauch,
Hossein Mirhosseini,
Jügen Henk,
Ingrid Mertig,
Henry Wortelen,
Bernd Engelkamp,
Anke B. Schmidt,
Markus Donath
Abstract:
In a joint theoretical and experimental investigation we show that a series of transition metals with strained body-centered cubic lattice ---W, Ta, Nb, and Mo--- host surface states that are topologically protected by mirror symmetry. Our finding extends the class of topologically nontrivial systems by topological crystalline transition metals. The investigation is based on independent calculatio…
▽ More
In a joint theoretical and experimental investigation we show that a series of transition metals with strained body-centered cubic lattice ---W, Ta, Nb, and Mo--- host surface states that are topologically protected by mirror symmetry. Our finding extends the class of topologically nontrivial systems by topological crystalline transition metals. The investigation is based on independent calculations of the electronic structures and of topological invariants, the results of which agree with established properties of the Dirac-type surface state in W(110). To further support our prediction, we investigate both experimentally by spin-resolved inverse photoemission and theoretically an unoccupied topologically nontrivial surface state in Ta(110).
△ Less
Submitted 12 May, 2016;
originally announced May 2016.
-
Behavior of $\mathbf{Σ3}$ grain boundaries in \CISe\ and \CGSe\ photovoltaic absorbers as revealed by first-principles hybrid functional calculations
Authors:
Hossein Mirhosseini,
Janos Kiss,
Claudia Felser
Abstract:
The inconclusive results of the previous first-principles studies on the \S3 \ grain boundaries (GBs) in \CISe\ reveal the importance of employing a method that can correctly describe the electronic structure of this solar-cell material. We have employed hybrid functional calculations to study the \S3 (112) and \S3 (114) GBs in \CISe\ and \CGSe. The electronic structure changes introduced by the f…
▽ More
The inconclusive results of the previous first-principles studies on the \S3 \ grain boundaries (GBs) in \CISe\ reveal the importance of employing a method that can correctly describe the electronic structure of this solar-cell material. We have employed hybrid functional calculations to study the \S3 (112) and \S3 (114) GBs in \CISe\ and \CGSe. The electronic structure changes introduced by the formation of GBs are threefold: creation of gap states, shift in band edges, and alteration of bandgap sizes. Gap states commonly behave as recombination centers, but the band alignment and the change in the bandgap size induced by GBs mitigate the destructive effect of these states in \CISe. That means, \S3 \ GBs are not detrimental for the carrier transport in devices based on \CISe. Conversely, these GBs are destructive for the carrier transport in \CGSe. The different behaviors of the \S3 \ GBs in CISe and CGSe might be considered by experimentalists to optimize the device fabrication to achieve high-performance solar cells.
△ Less
Submitted 6 January, 2016; v1 submitted 30 June, 2015;
originally announced June 2015.
-
The virial theorem and exact properties of density functionals for periodic systems
Authors:
H. Mirhosseini,
A. Cangi,
T. Baldsiefen,
A. Sanna,
C. R. Proetto,
E. K. U. Gross
Abstract:
In the framework of density functional theory, scaling and the virial theorem are essential tools for deriving exact properties of density functionals. Preexisting mathematical difficulties in deriving the virial theorem via scaling for periodic systems are resolved via a particular scaling technique. This methodology is employed to derive universal properties of the exchange-correlation energy fu…
▽ More
In the framework of density functional theory, scaling and the virial theorem are essential tools for deriving exact properties of density functionals. Preexisting mathematical difficulties in deriving the virial theorem via scaling for periodic systems are resolved via a particular scaling technique. This methodology is employed to derive universal properties of the exchange-correlation energy functional for periodic systems.
△ Less
Submitted 22 May, 2014;
originally announced May 2014.
-
Tuning independently Fermi energy and spin splitting in Rashba systems: Ternary surface alloys on Ag(111)
Authors:
H. Mirhosseini,
A. Ernst,
S. Ostanin,
J. Henk
Abstract:
By detailed first-principles calculations we show that the Fermi energy and the Rashba splitting in disordered ternary surface alloys (BiPbSb)/Ag(111) can be independently tuned by choosing the concentrations of Bi and Pb. The findings are explained by three fundamental mechanisms, namely the relaxation of the adatoms, the strength of the atomic spin-orbit coupling, and band filling. By map** t…
▽ More
By detailed first-principles calculations we show that the Fermi energy and the Rashba splitting in disordered ternary surface alloys (BiPbSb)/Ag(111) can be independently tuned by choosing the concentrations of Bi and Pb. The findings are explained by three fundamental mechanisms, namely the relaxation of the adatoms, the strength of the atomic spin-orbit coupling, and band filling. By map** the Rashba characteristics,i.e.the splitting and the Rashba energy, and the Fermi energy of the surface states in the complete range of concentrations. Our results suggest to investigate experimentally effects which rely on the Rashba spin-orbit coupling in dependence on spin-orbit splitting and band filling.
△ Less
Submitted 7 May, 2010;
originally announced May 2010.
-
Interference of spin states in photoemission from Sb/Ag(111)
Authors:
Fabian Meier,
Vladimir Petrov,
Hossein Mirhosseini,
Luc Patthey,
Juergen Henk,
Juerg Osterwalder,
J. Hugo Dil
Abstract:
Using a three-dimensional spin polarimeter we have gathered evidence for the interference of spin states in photoemission from the surface alloy Sb/Ag(111). This system features a small Rashba-type spin-splitting of a size comparable to the linewidth of the quasiparticles, thus causing an intrinsic overlap between states with orthogonal spinors. Besides a small spin polarization caused by the sp…
▽ More
Using a three-dimensional spin polarimeter we have gathered evidence for the interference of spin states in photoemission from the surface alloy Sb/Ag(111). This system features a small Rashba-type spin-splitting of a size comparable to the linewidth of the quasiparticles, thus causing an intrinsic overlap between states with orthogonal spinors. Besides a small spin polarization caused by the spin-splitting, we observe a large spin polarization component in the plane normal to the quantization axis provided by the Rashba effect. Strongly suggestive of coherent spin rotation, this effect is largely independent of the photon energy and photon polarization.
△ Less
Submitted 27 January, 2010;
originally announced January 2010.
-
Tunable spin-gaps in a quantum-confined geometry
Authors:
Emmanouil Frantzeskakis,
Stephane Pons,
Hossein Mirhosseini,
Jurgen Henk,
Christian. R. Ast,
Marco Grioni
Abstract:
We have studied the interplay of a giant spin-orbit splitting and of quantum confinement in artificial Bi-Ag-Si trilayer structures. Angle-resolved photoelectron spectroscopy (ARPES) reveals the formation of a complex spin-dependent gap structure, which can be tuned by varying the thickness of the Ag buffer layer. This provides a means to tailor the electronic structure at the Fermi energy, with…
▽ More
We have studied the interplay of a giant spin-orbit splitting and of quantum confinement in artificial Bi-Ag-Si trilayer structures. Angle-resolved photoelectron spectroscopy (ARPES) reveals the formation of a complex spin-dependent gap structure, which can be tuned by varying the thickness of the Ag buffer layer. This provides a means to tailor the electronic structure at the Fermi energy, with potential applications for silicon-compatible spintronic devices.
△ Less
Submitted 11 June, 2008; v1 submitted 26 May, 2008;
originally announced May 2008.