Showing 1–12 of 12 results for author: Mirarchi, D

Power deposition studies for standard and crystal-assisted heavy ion collimation inthe CERN Large Hadron Collider

Authors: J. B. Potoine, R. Bruce, R. Cai, F. Cerutti, M. D'Andrea, L. Esposito, P. D. Hermes, A. Lechner, D. Mirarchi, S. Redaelli, V. Rodin, F. Salvat Pujo, P. Schoofs, A. Waets, F. Wrobel

Abstract: The LHC heavy-ion program with $^{208}$Pb$^{82+}$ beams will benefit from a significant increase of the beam intensity when entering its High-Luminosity era in Run~3 (2023). The stored energy is expected to surpass 20~MJ per beam. The LHC is equipped with a betatron collimation system, which intercepts the transverse beam halo and protects sensitive equipment such as superconducting magnets agains… ▽ More The LHC heavy-ion program with $^{208}$Pb$^{82+}$ beams will benefit from a significant increase of the beam intensity when entering its High-Luminosity era in Run~3 (2023). The stored energy is expected to surpass 20~MJ per beam. The LHC is equipped with a betatron collimation system, which intercepts the transverse beam halo and protects sensitive equipment such as superconducting magnets against beam losses. However, nuclear fragmentation and electromagnetic dissociation of $^{208}$Pb$^{82+}$ ions in collimators generates a flux of secondary fragments, which are lost in downstream dispersion suppressor and arc cells. These secondary ions may pose a performance limitation in upcoming runs since they can induce magnet quenches. In order to mitigate this risk, an alternative collimation technique, relying on bent crystals as primary collimators, will be used in forthcoming heavy-ion runs. In this paper, we study the power deposition in superconducting magnets by means of tracking and \textsc{FLUKA} shower simulations, comparing the standard collimation system against the crystal-based one. In order to quantify the predictive ability of the simulation model, we present absolute benchmarks against beam loss monitor measurements from the 2018 $^{208}$Pb$^{82+}$ run at 6.37~$Z$TeV. The benchmarks cover several hundred meters of beamline, from the primary collimators to the first arc cells. Based on these studies, we provide a detailed analysis of ion fragmentation and leakage to the cold magnets and quantify the expected quench margin in future $^{208}$Pb$^{82+}$ runs. △ Less

Submitted 7 April, 2023; originally announced April 2023.

Comments: 20 pages, 19 figures

HL-LHC layout for fixed-target experiments in ALICE based on crystal-assisted beam halo splitting

Authors: Marcin Patecki, Alex Fomin, Daniele Mirarchi, Stefano Redaelli, Cynthia Hadjidakis, Francesca Galluccio, Walter Scandale

Abstract: The Large Hadron Collider (LHC) at the European Organization for Nuclear Research (CERN) is the world's largest and most powerful particle accelerator colliding beams of protons and lead ions at energies up to 7 ZTeV, Z is the atomic number. ALICE is one of the detector experiments optimised for heavy-ion collisions. A fixed-target experiment in ALICE is being considered to collide a portion of th… ▽ More The Large Hadron Collider (LHC) at the European Organization for Nuclear Research (CERN) is the world's largest and most powerful particle accelerator colliding beams of protons and lead ions at energies up to 7 ZTeV, Z is the atomic number. ALICE is one of the detector experiments optimised for heavy-ion collisions. A fixed-target experiment in ALICE is being considered to collide a portion of the beam halo, split using a bent crystal inserted in the transverse hierarchy of the LHC collimation system, with an internal target placed a few meters upstream of the existing detector. This study is carried out as a part of the Physics Beyond Collider effort at CERN. Fixed-target collisions offer many physics opportunities related to hadronic matter and the quark-gluon plasma to extend the research potential of the CERN accelerator complex. Production of physics events depends on the particle flux on target. The machine layout for the fixed-target experiment is developed to provide a flux of particles on the target high enough to exploit the full capabilities of the ALICE detector acquisition system. This paper summarises the fixed-target layout consisting of the crystal assembly, the target and downstream absorbers. We discuss the conceptual integration of these elements within the LHC ring, the impact on ring losses, and expected performance in terms of particle flux on target. △ Less

Submitted 20 April, 2023; v1 submitted 24 October, 2022; originally announced October 2022.

Multiple scattering of channeled and non-channeled positively charged particles in bent monocrystalline silicon

Authors: W. Scandale, G. Arduini, F. Cerutti, L. S. Esposito, M. Garattini, S. Gilardoni, R. Losito, A. Masi, D. Mirarchi, S. Montesano, S. Redaelli, R. Rossi, G. Smirnov, L. Burmistrov, S. Dubos, V. Puill, A. Stocchi, L. Bandiera, V. Guidi, A. Mazzolari, M. Romagnoni, F. Murtas, F. Addesa, G. Cavoto, F. Iacoangeli , et al. (17 additional authors not shown)

Abstract: We present the results of an experimental study of multiple scattering of positively charged high energy particles in bent samples of monocrystalline silicon. This work confirms the recently discovered effect of a strong reduction in the rms multiple scattering angle of particles channeled in the silicon (111) plane. The effect is observed in the plane orthogonal to the bending plane. We show in d… ▽ More We present the results of an experimental study of multiple scattering of positively charged high energy particles in bent samples of monocrystalline silicon. This work confirms the recently discovered effect of a strong reduction in the rms multiple scattering angle of particles channeled in the silicon (111) plane. The effect is observed in the plane orthogonal to the bending plane. We show in detail the influence of angular constraints on the magnitude of the effect. Comparison of the multiple scattering process at different energies indicates a violation of the law of inverse proportionality of the rms angle of channeled particles with energy. By increasing the statistics, we have improved the results of multiple scattering measurements for particles moving, but not channeled, in silicon crystals. △ Less

Submitted 31 January, 2022; v1 submitted 24 January, 2022; originally announced January 2022.

Comments: arXiv admin note: text overlap with arXiv:1910.00250 minor fixes

Beam-based aperture measurements with movable collimator jaws as performance booster of the CERN Large Hadron Collider

Authors: N. Fuster-Martínez, R. W. Aßmann, R. Bruce, M. Giovannozzi, P. Hermes, A. Mereghetti, D. Mirarchi, S. Redaelli, J. Wenninger

Abstract: The beam aperture of a particle accelerator defines the clearance available for the circulating beams and is a parameter of paramount importance for the accelerator performance. At the CERN Large Hadron Collider (LHC), the knowledge and control of the available aperture is crucial because the nominal proton beams carry an energy of 362 MJ stored in a superconducting environment. Even a tiny fracti… ▽ More The beam aperture of a particle accelerator defines the clearance available for the circulating beams and is a parameter of paramount importance for the accelerator performance. At the CERN Large Hadron Collider (LHC), the knowledge and control of the available aperture is crucial because the nominal proton beams carry an energy of 362 MJ stored in a superconducting environment. Even a tiny fraction of beam losses could quench the superconducting magnets or cause severe material damage. Furthermore, in a circular collider, the performance in terms of peak luminosity depends to a large extent on the aperture of the inner triplet quadrupoles, which are used to focus the beams at the interaction points. In the LHC, this aperture represents the smallest aperture at top-energy with squeezed beams and determines the maximum potential reach of the peak luminosity. Beam-based aperture measurements in these conditions are difficult and challenging. In this paper, we present different methods that have been developed over the years for precise beam-based aperture measurements in the LHC, highlighting applications and results that contributed to boost the operational LHC performance in Run 1 (2010-2013) and Run 2 (2015-2018). △ Less

Submitted 17 June, 2021; originally announced June 2021.

Comments: 21 pages, 14 figures

Double-crystal measurements at the CERN SPS

Authors: W. Scandale, G. Arduini, F. Cerutti, M. D'Andrea, L. S. Esposito, M. Garattini, S. Gilardoni, D. Mirarchi, S. Montesano, A. Natochii, S. Redaelli, R. Rossi, G. I. Smirnov, L. Burmistrov, S. Dubos, V. Puill, A. Stocchi, F. Addesa, F. Murtas, F. Galluccio, A. D. Kovalenko, A. M. Taratin, A. S. Denisov, Yu. A. Gavrikov, Yu. M. Ivanov , et al. (13 additional authors not shown)

Abstract: The UA9 setup, installed in the Super Proton Synchrotron (SPS) at CERN, was exploited for a proof of principle of the double-crystal scenario, proposed to measure the electric and the magnetic moments of short-lived baryons in a high-energy hadron collider, such as the Large Hadron Collider (LHC). Linear and angular actuators were used to position the crystals and establish the required beam confi… ▽ More The UA9 setup, installed in the Super Proton Synchrotron (SPS) at CERN, was exploited for a proof of principle of the double-crystal scenario, proposed to measure the electric and the magnetic moments of short-lived baryons in a high-energy hadron collider, such as the Large Hadron Collider (LHC). Linear and angular actuators were used to position the crystals and establish the required beam configuration. Timepix detectors and high-sensitivity Beam Loss Monitors were exploited to observe the deflected beams. Linear and angular scans allowed exploring the particle interactions with the two crystals and recording their efficiency. The measured values of the beam trajectories, profiles and of the channeling efficiency agree with the results of a Monte-Carlo simulation. △ Less

Submitted 26 March, 2021; originally announced March 2021.

Comments: 25 pages, 13 figures

Layouts for fixed-target experiments and dipole moment measurements of short-living baryons using bent crystals at the LHC

Authors: D. Mirarchi, A. S. Fomin, S. Redaelli, W. Scandale

Abstract: Several studies are on-going at CERN in the framework of the Physics Beyond Collider study group, with main aim of broadening the physics research spectrum using the available accelerator complex and infrastructure. The possibility to design a layout that allows fixed-target experiments in the primary vacuum of the CERN Large Hadron Collider (LHC), without the need of a dedicated extraction line,… ▽ More Several studies are on-going at CERN in the framework of the Physics Beyond Collider study group, with main aim of broadening the physics research spectrum using the available accelerator complex and infrastructure. The possibility to design a layout that allows fixed-target experiments in the primary vacuum of the CERN Large Hadron Collider (LHC), without the need of a dedicated extraction line, is included among these studies. The principle of the layouts presented in this paper is to deflect beam halo protons on a fixed-target placed in the LHC primary vacuum, by means of bent crystals (i.e. crystal channeling). Moreover, interaction products emerging from the target can be used to perform electromagnetic dipole moments measurements of short-living baryons. Two possible layouts are reported, together with a thorough evaluation on their expected performance and impact on LHC operations. △ Less

Submitted 20 June, 2019; originally announced June 2019.

Commissioning and operation of the Cherenkov detector for proton Flux Measurement of the UA9 Experiment

Authors: F. M. Addesa, L. Burmistrov, D. Breton, G. Cavoto, V. Chaumat, S. Dubos, L. Esposito, F. Galluccio, M. Garattini, F. Iacoangeli, J. Maalmi, D. Mirarchi, A. Natochii, V. Puill, R. Rossi, W. Scandale, S. Montesano, A. Stocchi

Abstract: The UA9 Experiment at CERN-SPS investigates channeling processes in bent silicon crystals with the aim to manipulate hadron beams. Monitoring and characterization of channeled beams in the high energy accelerators environment ideally requires in-vacuum and radiation hard detectors. For this purpose the Cherenkov detector for proton Flux Measurement (CpFM) was designed and developed. It is based on… ▽ More The UA9 Experiment at CERN-SPS investigates channeling processes in bent silicon crystals with the aim to manipulate hadron beams. Monitoring and characterization of channeled beams in the high energy accelerators environment ideally requires in-vacuum and radiation hard detectors. For this purpose the Cherenkov detector for proton Flux Measurement (CpFM) was designed and developed. It is based on thin fused silica bars in the beam pipe vacuum which intercept charged particles and generate Cherenkov light. The first version of the CpFM is installed since 2015 in the crystal-assisted collimation setup of the UA9 experiment. In this paper the procedures to make the detector operational and fully integrated in the UA9 setup are described. The most important standard operations of the detector are presented. They have been used to commission and characterize the detector, providing moreover the measurement of the integrated channeled beam profile and several functionality tests as the determination of the crystal bending angle. The calibration has been performed with Lead (Pb) and Xenon (Xe) beams and the results are applied to the flux measurement discussed here in detail. △ Less

Submitted 12 April, 2019; originally announced April 2019.

Comments: 25 pages, 14 figures

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment 946 (2019), p. 162513. issn: 0168-9002

First determination of the $ρ$ parameter at $\sqrt{s} = 13$ TeV -- probing the existence of a colourless three-gluon bound state

Authors: TOTEM Collaboration, G. Antchev, P. Aspell, I. Atanassov, V. Avati, J. Baechler, C. Baldenegro Barrera, V. Berardi, M. Berretti, E. Bossini, U. Bottigli, M. Bozzo, R. Bruce, H. Burkhardt, F. S. Cafagna, M. G. Catanesi, M. Csanád, T. Csörgő, M. Deile, F. De Leonardis, A. D'Orazio, M. Doubek, D. Druzhkin, K. Eggert, V. Eremin , et al. (71 additional authors not shown)

Abstract: The TOTEM experiment at the LHC has performed the first measurement at $\sqrt{s} = 13$ TeV of the $ρ$ parameter, the real to imaginary ratio of the nuclear elastic scattering amplitude at $t=0$, obtaining the following results: $ρ= 0.09 \pm 0.01$ and $ρ= 0.10 \pm 0.01$, depending on different physics assumptions and mathematical modelling. The unprecedented precision of the $ρ$ measurement, combin… ▽ More The TOTEM experiment at the LHC has performed the first measurement at $\sqrt{s} = 13$ TeV of the $ρ$ parameter, the real to imaginary ratio of the nuclear elastic scattering amplitude at $t=0$, obtaining the following results: $ρ= 0.09 \pm 0.01$ and $ρ= 0.10 \pm 0.01$, depending on different physics assumptions and mathematical modelling. The unprecedented precision of the $ρ$ measurement, combined with the TOTEM total cross-section measurements in an energy range larger than 10 TeV (from 2.76 to 13 TeV), has implied the exclusion of all the models classified and published by COMPETE. The $ρ$ results obtained by TOTEM are compatible with the predictions, from alternative theoretical models both in the Regge-like framework and in the QCD framework, of a colourless 3-gluon bound state exchange in the $t$-channel of the proton-proton elastic scattering. On the contrary, if shown that the 3-gluon bound state $t$-channel exchange is not of importance for the description of elastic scattering, the $ρ$ value determined by TOTEM would represent a first evidence of a slowing down of the total cross-section growth at higher energies. The very low-$|t|$ reach allowed also to determine the absolute normalisation using the Coulomb amplitude for the first time at the LHC and obtain a new total proton-proton cross-section measurement $σ_{tot} = 110.3 \pm 3.5$ mb, completely independent from the previous TOTEM determination. Combining the two TOTEM results yields $σ_{tot} = 110.5 \pm 2.4$ mb. △ Less

Submitted 11 December, 2018; originally announced December 2018.

Comments: 95 authors, 30 pages, 20 figures, 6 tables, submitted for publication. arXiv admin note: text overlap with arXiv:1610.00603

Report number: CERN-EP-2017-335-v3

Performance of the Large Hadron Collider cleaning system during the squeeze: simulations and measurements

Authors: Sam Tygier, Robert B. Appleby, Roderick Bruce, Daniele Mirarchi, Stefano Redaelli, Alessandra Valloni

Abstract: The Large Hadron Collider (LHC) at CERN is a 7 TeV proton synchrotron, with a design stored energy of 362 MJ per beam. The high-luminosity (HL-LHC) upgrade will increase this to 675 MJ per beam. In order to protect the superconducting magnets and other sensitive equipment from quenches and damage due to beam loss, a multi-level collimation system is needed. Detailed simulations are required to und… ▽ More The Large Hadron Collider (LHC) at CERN is a 7 TeV proton synchrotron, with a design stored energy of 362 MJ per beam. The high-luminosity (HL-LHC) upgrade will increase this to 675 MJ per beam. In order to protect the superconducting magnets and other sensitive equipment from quenches and damage due to beam loss, a multi-level collimation system is needed. Detailed simulations are required to understand where particles scattered by the collimators are lost around the ring in a range of machine configurations. Merlin++ is a simulation framework that has been extended to include detailed scattering physics, in order to predict local particle loss rates around the LHC ring. We compare Merlin++ simulations of losses during the squeeze (the dynamic reduction of the β-function at the interaction points before the beams are put into collision) with loss maps recorded during beam squeezes for Run 1 and 2 configurations. The squeeze is particularly important as both collimator positions and quadrupole magnet currents are changed. We can then predict, using Merlin++, the expected losses for the HL-LHC to ensure adequate protection of the machine. △ Less

Submitted 11 February, 2019; v1 submitted 12 July, 2018; originally announced July 2018.

Journal ref: Phys. Rev. Accel. Beams 22, 023001 (2019)

Experimental results of crystal-assisted slow extraction at the SPS

Authors: M. A. Fraser, F. Addesa, G. Cavoto, F. Galluccio, S. Gilardoni, B. Goddard, F. Iacoangeli, V. Kain, D. Mirarchi, S. Montesano, F. Murtas, S. Petrucci, S. Redaelli, R. Rossi, W. Scandale, L. Stoel

Abstract: The possibility of extracting highly energetic particles from the Super Proton Synchrotron (SPS) by means of silicon bent crystals has been explored since the 1990's. The channelling effect of a bent crystal can be used to strongly deflect primary protons and eject them from the synchrotron. Many studies and experiments have been carried out to investigate crystal channelling effects. The extracti… ▽ More The possibility of extracting highly energetic particles from the Super Proton Synchrotron (SPS) by means of silicon bent crystals has been explored since the 1990's. The channelling effect of a bent crystal can be used to strongly deflect primary protons and eject them from the synchrotron. Many studies and experiments have been carried out to investigate crystal channelling effects. The extraction of 120 and 270 GeV proton beams has already been demonstrated in the SPS with dedicated experiments located in the ring. Presently in the SPS, the UA9 experiment is performing studies to evaluate the possibility to use bent silicon crystals to steer particle beams in high energy accelerators. Recent studies on the feasibility of extraction from the SPS have been made using the UA9 infrastructure with a longer-term view of using crystals to help mitigate slow extraction induced activation of the SPS. In this paper, the possibility to eject particles into the extraction channel in LSS2 using the bent crystals already installed in the SPS is presented. Details of the concept, simulations and measurements carried out with beam are presented, before the outlook for the future is discussed. △ Less

Submitted 17 July, 2017; originally announced July 2017.

Comments: 4 pages, 7 figures, submitted to to International Particle Accelerator Conference (IPAC) 2017 in Copenhagen, Denmark

Simulations and measurements of beam loss patterns at the CERN Large Hadron Collider

Authors: R. Bruce, R. W. Assmann, V. Boccone, C. Bracco, M. Brugger, M. Cauchi, F. Cerutti, D. Deboy, A. Ferrari, L. Lari, A. Marsili, A. Mereghetti, D. Mirarchi, E. Quaranta, S. Redaelli, G. Robert-Demolaize, A. Rossi, B. Salvachua, E. Skordis, C. Tambasco, G. Valentino, T. Weiler, V. Vlachoudis, D. Wollmann

Abstract: The CERN Large Hadron Collider (LHC) is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010--2013, the LHC was routinely storing protons at 3.5--4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordi… ▽ More The CERN Large Hadron Collider (LHC) is designed to collide proton beams of unprecedented energy, in order to extend the frontiers of high-energy particle physics. During the first very successful running period in 2010--2013, the LHC was routinely storing protons at 3.5--4 TeV with a total beam energy of up to 146 MJ, and even higher stored energies are foreseen in the future. This puts extraordinary demands on the control of beam losses. An un-controlled loss of even a tiny fraction of the beam could cause a superconducting magnet to undergo a transition into a normal-conducting state, or in the worst case cause material damage. Hence a multi-stage collimation system has been installed in order to safely intercept high-amplitude beam protons before they are lost elsewhere. To guarantee adequate protection from the collimators, a detailed theoretical understanding is needed. This article presents results of numerical simulations of the distribution of beam losses around the LHC that have leaked out of the collimation system. The studies include tracking of protons through the fields of more than 5000 magnets in the 27 km LHC ring over hundreds of revolutions, and Monte-Carlo simulations of particle-matter interactions both in collimators and machine elements being hit by esca** particles. The simulation results agree typically within a factor 2 with measurements of beam loss distributions from the previous LHC run. Considering the complex simulation, which must account for a very large number of unknown imperfections, and in view of the total losses around the ring spanning over 7 orders of magnitude, we consider this an excellent agreement. Our results give confidence in the simulation tools, which are used also for the design of future accelerators. △ Less

Submitted 10 September, 2014; originally announced September 2014.

Journal ref: Phys. Rev. ST Accel. Beams 17, 081004 (2014)

The UA9 experimental layout

Authors: W. Scandale, G. Arduini, R. Assmann, C. Bracco, F. Cerutti, J. Christiansen, S. Gilardoni, E. Laface, R. Losito, A. Masi, E. Metral, D. Mirarchi, S. Montesano, V. Previtali, S. Redaelli, G. Valentino, P. Schoofs, G. Smirnov, L. Tlustos, E. Bagli, S. Baricordi, P. Dalpiaz, V. Guidi, A. Mazzolari, D. Vincenzi , et al. (36 additional authors not shown)

Abstract: The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintill… ▽ More The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintillators, Gas Electron Multiplier chambers and other beam loss monitors measure nuclear loss rates induced by the interaction of the beam halo in the crystal. Roman pots are installed in the path of the deflected particles and are equipped with a Medipix detector to reconstruct the transverse distribution of the im**ing beam. Finally UA9 takes advantage of an LHC-collimator prototype installed close to the Roman pot to help in setting the beam conditions and to analyze the efficiency to deflect the beam. This paper describes in details the hardware installed to study the crystal collimation during 2010. △ Less

Submitted 29 June, 2011; originally announced June 2011.

Comments: 15pages, 11 figure, submitted to JINST