-
Performance of a prototype TORCH time-of-flight detector
Authors:
Srishti Bhasin,
Thomas Blake,
Nicholas Brook,
Maria Flavia Cicala,
Thomas Conneely,
David Cussans,
Maarten van Dijk,
Roger Forty,
Christoph Frei,
Emmy Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Tom Hadavizadeh,
Thomas Hancock,
Thomas Jones,
Neville Harnew,
Michal Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker,
Jennifer Clare Smallwood
Abstract:
TORCH is a novel time-of-flight detector, designed to provide charged particle identification of pions, kaons and protons in the momentum range 2-20 GeV/c over a 9.5 m flight path. A detector module, comprising a 10mm thick quartz plate, provides a source of Cherenkov photons which propagate via total internal reflection to one end of the plate. Here, the photons are focused onto an array of custo…
▽ More
TORCH is a novel time-of-flight detector, designed to provide charged particle identification of pions, kaons and protons in the momentum range 2-20 GeV/c over a 9.5 m flight path. A detector module, comprising a 10mm thick quartz plate, provides a source of Cherenkov photons which propagate via total internal reflection to one end of the plate. Here, the photons are focused onto an array of custom-designed Micro-Channel Plate Photo-Multiplier Tubes (MCP-PMTs) which measure their positions and arrival times. The target time resolution per photon is 70 ps which, for 30 detected photons per charged particle, results in a 10-15 ps time-of-flight resolution. A 1.25 m length TORCH prototype module employing two MCP-PMTs has been developed, and tested at the CERN PS using a charged hadron beam of 8 GeV/c momentum. The construction of the module, the properties of the MCP-PMTs and the readout electronics are described. Measurements of the collected photon yields and single-photon time resolutions have been performed as a function of particle entry points on the plate and compared to expectations. These studies show that the performance of the TORCH prototype approaches the design goals for the full-scale detector.
△ Less
Submitted 8 March, 2023; v1 submitted 27 September, 2022;
originally announced September 2022.
-
Picosecond timing of charged particles using the TORCH detector
Authors:
Maria Flavia Cicala,
Srishti Bhasin,
Thomas Blake,
Nick H. Brook,
Thomas Conneely,
David Cussans,
Maarten W. U. van Dijk,
Roger Forty,
Christoph Frei,
Emmy P. M. Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Thomas Hadavizadeh,
Thomas Henry Hancock,
Neville Harnew,
Thomas Jones,
Michal Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker,
Jennifer Clare Smallwood
Abstract:
TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The posit…
▽ More
TORCH is a large-area, high-precision time-of-flight (ToF) detector designed to provide charged-particle identification in the 2-20 GeV$/c$ momentum range. Prompt Cherenkov photons emitted by charged hadrons as they traverse a 10mm quartz radiator are propagated to the periphery of the detector, where they are focused onto an array of micro-channel plate photomultiplier tubes (MCP-PMTs). The position and arrival times of the photons are used to infer the particles' time of entry in the radiator, to identify hadrons based on their ToF. The MCP-PMTs were developed with an industrial partner to satisfy the stringent requirements of the TORCH detector. The requirements include a finely segmented anode, excellent time resolution, and a long lifetime. Over an approximately 10m flight distance, the difference in ToF between a kaon and a pion with 10GeV$/c$ momentum is 35ps, leading to a 10-15ps per track timing resolution requirement. On average 30 photons per hadron are detected, which translates to a single-photon time resolution of 70ps. The TORCH research and development program aims to demonstrate the validity of the detector concept through laboratory and beam tests, results from which are presented. A timing resolution of 70-100ps was reached in beam tests, approaching the TORCH design goal. Laboratory timing tests consist of operating the MCP-PMTs coupled to the TORCH readout electronics. A time resolution of about 50ps was measured, meeting the TORCH target timing resolution.
△ Less
Submitted 25 March, 2022;
originally announced March 2022.
-
Test-beam demonstration of a TORCH prototype module
Authors:
J. C. Smallwood,
S. Bhasin,
T. Blake,
N. H. Brook,
M. F. Cicala,
T. Conneely,
D. Cussans,
M. W. U. van Dijk,
R. Forty,
C. Frei,
E. P. M. Gabriel,
R. Gao,
T. Gershon,
T. Gys,
T. Hadavizadeh,
T. H. Hancock,
N. Harnew,
M. Kreps,
J. Milnes,
D. Piedigrossi,
J. Rademacker
Abstract:
The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positi…
▽ More
The TORCH time-of-flight detector is designed to provide a 15 ps timing resolution for charged particles, resulting in $π$/$K$ particle identification up to 10 GeV/c momentum over a 10 m flight path. Cherenkov photons, produced in a quartz plate of 10 mm thickness, are focused onto an array of micro-channel plate photomultipliers (MCP-PMTs) which measure the photon arrival times and spatial positions. A half-scale ($660\times1250\times10$ mm$^3$) TORCH demonstrator module has been tested in an 8 GeV/c mixed proton-pion beam at CERN. Customised square MCP-PMTs of active area $53\times53$ mm$^2$ and granularity $64\times64$ pixels have been employed, which have been developed in collaboration with an industrial partner. The single-photon timing performance and photon yields have been measured as a function of beam position in the radiator, giving measurements which are consistent with expectations. The expected performance of TORCH for high luminosity running of the LHCb Upgrade II has been simulated.
△ Less
Submitted 8 November, 2021;
originally announced November 2021.
-
Status of the TORCH Project
Authors:
N. Harnew,
S. Bhasin,
T. Blake,
N. H. Brook,
M. F. Cicala,
T. Conneely,
D. Cussans,
M. W. U. vanDijk,
R. Forty,
C. Frei,
E. P. M. Gabriel,
R. Gao,
T. Gershon,
T. Gys,
T. Hadavizadeh,
T. H. Hancock,
M. Kreps,
J. Milnes,
D. Piedigrossi,
J. Rademacker
Abstract:
The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-…
▽ More
The TORCH time-of-flight detector will provide particle identification between 2-10 GeV/c momentum over a flight distance of 10 m, and is designed for large-area coverage, up to 30 m^2. A 15 ps time-of-flight resolution per incident particle is anticipated by measuring the arrival times from Cherenkov photons produced in a synthetic fused silica radiator plate of 10 mm thickness. Customised Micro-Channel Plate Photomultiplier Tube (MCP-PMT) photon detectors of 53 x 53 mm^2 active area with a 64 x 64 granularity have been developed with industrial partners. Test-beam studies using both a small-scale TORCH demonstrator and a half-length TORCH module are presented. The desired timing resolution of 70 ps per single photon is close to being achieved.
△ Less
Submitted 6 March, 2020;
originally announced March 2020.
-
Test-beam studies of a small-scale TORCH time-of-flight demonstrator
Authors:
S. Bhasin,
T. Blake,
N. Brook,
T. Conneely,
D. Cussans,
R. Forty,
C. Frei,
E. P. M. Gabriel,
R. Gao,
T. Gershon,
T. Gys,
T. Hadavizadeh,
T. H. Hancock,
N. Harnew,
M. Kreps,
J. Milnes,
D. Piedigrossi,
J. Rademacker,
M. van Dijk
Abstract:
TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Mi…
▽ More
TORCH is a time-of-flight detector designed to perform particle identification over the momentum range 2$-$10 GeV/c for a 10 m flight path. The detector exploits prompt Cherenkov light produced by charged particles traversing a quartz plate of 10 mm thickness. Photons are then trapped by total internal reflection and directed onto a detector plane instrumented with customised position-sensitive Micro-Channel Plate Photo-Multiplier Tube (MCP-PMT) detectors. A single-photon timing resolution of 70 ps is targeted to achieve the desired separation of pions and kaons, with an expectation of around 30 detected photons per track. Studies of the performance of a small-scale TORCH demonstrator with a radiator of dimensions 120 $\times$ 350 $\times$ 10 mm$^3$ have been performed in two test-beam campaigns during November 2017 and June 2018. Single-photon time resolutions ranging from 104.3 ps to 114.8 ps and 83.8 ps to 112.7 ps have been achieved for MCP-PMTs with granularity 4 $\times$ 64 and 8 $\times$ 64 pixels, respectively. Photon yields are measured to be within $\sim$10% and $\sim$30% of simulation, respectively. Finally, the outlook for future work with planned improvements is presented.
△ Less
Submitted 18 February, 2020;
originally announced February 2020.
-
Beam tests of a large-scale TORCH time-of-flight demonstrator
Authors:
Thomas H. Hancock,
Srishti Bhasin,
Thomas Blake,
Nicholas Brook,
Tom Conneely,
David Cussans,
Roger Forty,
Christophe Frei,
Emmy P. M. Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Tom T. Hadavizadeh,
Neville Harnew,
Michel Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker,
Maarten van Dijk
Abstract:
The TORCH time-of-flight detector is designed to provide particle identification in the momentum range 2-10 GeV/c over large areas. The detector exploits prompt Cherenkov light produced by charged particles traversing a 10 mm thick quartz plate. The photons propagate via total internal reflection and are focused onto a detector plane comprising position-sensitive Micro-Channel Plate Photo-Multipli…
▽ More
The TORCH time-of-flight detector is designed to provide particle identification in the momentum range 2-10 GeV/c over large areas. The detector exploits prompt Cherenkov light produced by charged particles traversing a 10 mm thick quartz plate. The photons propagate via total internal reflection and are focused onto a detector plane comprising position-sensitive Micro-Channel Plate Photo-Multiplier Tubes (MCP-PMT) detectors. The goal is to achieve a single-photon timing resolution of 70 ps, giving a timing precision of 15 ps per charged particle by combining the information from around 30 detected photons. The MCP-PMT detectors have been developed with a commercial partner (Photek Ltd, UK), leading to the delivery of a square tube of active area 53 $\times$ 53mm$^2$ with a granularity of 8 $\times$ 128 pixels equivalent. A large-scale demonstrator of TORCH, having a quartz plate of dimensions 660 $\times$ 1250 $\times$ 10 mm$^3$ and read out by a pair of MCP-PMTs with custom readout electronics, has been verified in a test beam campaign at the CERN PS. Preliminary results indicate that the required performance is close to being achieved. The anticipated performance of a full-scale TORCH detector at the LHCb experiment is presented.
△ Less
Submitted 25 April, 2019;
originally announced April 2019.
-
Status of the TORCH time-of-flight project
Authors:
Neville Harnew,
Srishti Bhasin,
Thomas Blake,
Nicholas Brook,
Tom Conneely,
David Cussans,
Maarten van Dijk,
Roger Forty,
Christoph Frei,
Emmy Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Tom Hadavizadeh,
Thomas Hancock,
Michel Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker
Abstract:
TORCH is a time-of-flight detector, designed to provide charged pi/K particle identification up to a momentum of 10 GeV/c for a 10 m flight path. To achieve this level of performance, a time resolution of 15 ps per incident particle is required. TORCH uses a plane of quartz of 1 cm thickness as a source of Cherenkov photons, which are then focussed onto square Micro-Channel Plate Photomultipliers…
▽ More
TORCH is a time-of-flight detector, designed to provide charged pi/K particle identification up to a momentum of 10 GeV/c for a 10 m flight path. To achieve this level of performance, a time resolution of 15 ps per incident particle is required. TORCH uses a plane of quartz of 1 cm thickness as a source of Cherenkov photons, which are then focussed onto square Micro-Channel Plate Photomultipliers (MCP-PMTs) of active area 53 x 53 mm^2, segmented into 8 x 128 pixels equivalent. A small-scale TORCH demonstrator with a customised MCP-PMT and associated readout electronics has been successfully operated in a 5 GeV/c mixed pion/proton beam at the CERN PS facility. Preliminary results indicate that a single-photon resolution better than 100 ps can be achieved. The expected performance of a full-scale TORCH detector for the Upgrade II of the LHCb experiment is also discussed.
△ Less
Submitted 23 December, 2018;
originally announced December 2018.
-
TORCH: a large area time-of-flight detector for particle identification
Authors:
Neville Harnew,
Srishti Bhasin,
Thomas Blake,
Nicholas Brook,
Tom Conneely,
David Cussans,
Maarten van Dijk,
Roger Forty,
Christophe Frei,
Emmy Gabriel,
Rui Gao,
Timothy Gershon,
Thierry Gys,
Tom T. Hadavizadeh,
Thomas Hancock,
Michel Kreps,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker
Abstract:
TORCH is a time-of-flight detector that is being developed for the Upgrade II of the LHCb experiment, with the aim of providing charged particle identification over the momentum range 2-10 GeV/c. A small-scale TORCH demonstrator with customised readout electronics has been operated successfully in beam tests at the CERN PS. Preliminary results indicate that a single-photon resolution better than 1…
▽ More
TORCH is a time-of-flight detector that is being developed for the Upgrade II of the LHCb experiment, with the aim of providing charged particle identification over the momentum range 2-10 GeV/c. A small-scale TORCH demonstrator with customised readout electronics has been operated successfully in beam tests at the CERN PS. Preliminary results indicate that a single-photon resolution better than 100 ps can be achieved.
△ Less
Submitted 3 December, 2018; v1 submitted 15 October, 2018;
originally announced October 2018.
-
Testbeam studies of a TORCH prototype detector
Authors:
Nicholas Brook,
Lucia Castillo García,
Thomas Conneely,
David Cussans,
Maarten van Dijk,
Klaus Föhl,
Roger Forty,
Christoph Frei,
Rui Gao,
Thierry Gys,
Thomas Hancock,
Neville Harnew,
Jon La**ton,
James Milnes,
Didier Piedigrossi,
Jonas Rademacker,
Ana Ros García
Abstract:
TORCH is a novel time-of-flight detector that has been developed to provide charged-particle identification between 2 and 10 GeV/c momentum. TORCH combines arrival times from multiple Cherenkov photons produced within a 10 mm-thick quartz radiator plate, to achieve a 15 ps time-of-flight resolution per incident particle. A customised Micro-Channel Plate photomultiplier tube (MCP-PMT) and associate…
▽ More
TORCH is a novel time-of-flight detector that has been developed to provide charged-particle identification between 2 and 10 GeV/c momentum. TORCH combines arrival times from multiple Cherenkov photons produced within a 10 mm-thick quartz radiator plate, to achieve a 15 ps time-of-flight resolution per incident particle. A customised Micro-Channel Plate photomultiplier tube (MCP-PMT) and associated readout system utilises an innovative charge-sharing technique between adjacent pixels to obtain the necessary 70 ps time resolution of each Cherenkov photon. A five-year R\&D programme has been undertaken, culminating in the construction of a small-scale prototype TORCH module. In testbeams at CERN, this prototype operated successfully with customised electronics and readout system. A full analysis chain has been developed to reconstruct the data and to calibrate the detector. Results are compared to those using a commercial Planacon MCP-PMT, and single photon resolutions approaching 80 ps have been achieved. The photon counting efficiency was found to be in reasonable agreement with a GEANT4 Monte Carlo simulation of the detector. The small-scale demonstrator is a precursor to a full-scale TORCH module (with a radiator plate of $660\times1250\times10~{\rm mm^3}$), which is currently under construction.
△ Less
Submitted 2 August, 2018; v1 submitted 13 May, 2018;
originally announced May 2018.
-
Overview of recent physics results from MAST
Authors:
A Kirk,
J Adamek,
RJ Akers,
S Allan,
L Appel,
F Arese Lucini,
M Barnes,
T Barrett,
N Ben Ayed,
W Boeglin,
J Bradley,
P K Browning,
J Brunner,
P Cahyna,
M Carr,
F Casson,
M Cecconello,
C Challis,
IT Chapman,
S Chapman,
S Conroy,
N Conway,
WA Cooper,
M Cox,
N Crocker
, et al. (138 additional authors not shown)
Abstract:
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbu…
▽ More
New results from MAST are presented that focus on validating models in order to extrapolate to future devices. Measurements during start-up experiments have shown how the bulk ion temperature rise scales with the square of the reconnecting field. During the current ramp up models are not able to correctly predict the current diffusion. Experiments have been performed looking at edge and core turbulence. At the edge detailed studies have revealed how filament characteristic are responsible for determining the near and far SOL density profiles. In the core the intrinsic rotation and electron scale turbulence have been measured. The role that the fast ion gradient has on redistributing fast ions through fishbone modes has led to a redesign of the neutral beam injector on MAST Upgrade. In H-mode the turbulence at the pedestal top has been shown to be consistent with being due to electron temperature gradient modes. A reconnection process appears to occur during ELMs and the number of filaments released determines the power profile at the divertor. Resonant magnetic perturbations can mitigate ELMs provided the edge peeling response is maximised and the core kink response minimised. The mitigation of intrinsic error fields with toroidal mode number n>1 has been shown to be important for plasma performance.
△ Less
Submitted 18 November, 2016;
originally announced November 2016.
-
MAST Upgrade - Construction Status
Authors:
Joe Milnes,
Nizar Ben Ayed,
Fahim Dhalla,
Geoff Fishpool,
John Hill,
Ioannis Katramados,
Richard Martin,
Graham Naylor,
Tom O'Gorman,
Rory Scannell,
the MAST Upgrade team
Abstract:
The Mega Amp Spherical Tokamak (MAST) is the centre piece of the UK fusion research programme. In 2010, a MAST Upgrade programme was initiated with three primary objectives, to contribute to: 1) Testing reactor concepts (in particular exhaust solutions via a flexible divertor allowing Super-X and other extended leg configurations); 2) Adding to the knowledge base for ITER (by addressing important…
▽ More
The Mega Amp Spherical Tokamak (MAST) is the centre piece of the UK fusion research programme. In 2010, a MAST Upgrade programme was initiated with three primary objectives, to contribute to: 1) Testing reactor concepts (in particular exhaust solutions via a flexible divertor allowing Super-X and other extended leg configurations); 2) Adding to the knowledge base for ITER (by addressing important plasma physics questions and develo** predictive models to help optimise ITER performance of ITER) and 3) Exploring the feasibility of using a spherical tokamak as the basis for a fusion Component Test Facility. With the project mid-way through its construction phase, progress will be reported on a number of the critical subsystems. This will include manufacture and assembly of the coils, armour and support structures that make up the new divertors, construction of the new set coils that make up the centre column, installation of the new power supplies for powering the divertor coils and enhanced TF coil set, progress in delivering the upgraded diagnostic capability, the modification and upgrading of the NBI heating systems and the complete overhaul of the machine control infrastructure, including a new control room with full remote participation facilities.
△ Less
Submitted 23 March, 2015;
originally announced March 2015.
-
Mitigation of MHD induced fast-ion redistribution in MAST and implications for MAST-Upgrade design
Authors:
D L Keeling,
T R Barrett,
M Cecconello,
C D Challis,
N Hawkes,
O M Jones,
I Klimek,
K G McClements,
A Meakins,
J Milnes,
M Turnyanskiy,
MAST team
Abstract:
The phenomenon of redistribution of neutral beam fast-ions due to MHD activity in plasma has been observed on many tokamaks and more recently has been a focus of research on MAST (Turnyanskiy M. et al, 2011 Nucl. Fusion 53 053016). n=1 fishbone modes are observed to cause a large decrease in the neutron emission rate corresponding to a significant perturbation of the fast-ion population in the pla…
▽ More
The phenomenon of redistribution of neutral beam fast-ions due to MHD activity in plasma has been observed on many tokamaks and more recently has been a focus of research on MAST (Turnyanskiy M. et al, 2011 Nucl. Fusion 53 053016). n=1 fishbone modes are observed to cause a large decrease in the neutron emission rate corresponding to a significant perturbation of the fast-ion population in the plasma. Theoretical work on fishbone modes states that the fast-ion distribution itself acts as the source of free energy driving the modes that cause the redistribution. Therefore a series of experiments have been carried out on MAST to investigate a range of plasma density levels at two neutral beam power levels to determine the region within this parameter space in which MHD activity and consequent fast-ion redistribution is suppressed. Analysis of these experiments shows complete suppression of MHD activity at high density with increasing activity and fast-ion redistribution at lower densities and higher NB power accompanied by strong evidence for localisation of the redistribution effect to a specific region in the plasma core. The results also indicate correlations between the form of the modelled fast-ion distribution function, the amplitude and growth rate of the fishbone modes, and the magnitude of the redistribution effect. The same analysis has been carried out on models of MAST-Upgrade baseline plasma scenarios to determine whether significant fast-ion redistribution is likely to occur in that device. A simple change to the neutral-beam injector geometry is proposed which is shown to have a significant mitigating effect in terms of the fishbone mode drive and is therefore expected to allow effective plasma heating and current drive over a wider range of plasma conditions in MAST-Upgrade.
△ Less
Submitted 10 July, 2014;
originally announced July 2014.
-
A position- and time-sensitive photon-counting detector with delay-line read-out
Authors:
O. Jagutzki,
V. Dangendorf,
R. Lauck,
A. Czasch,
J. Milnes
Abstract:
We have developed image intensifier tubes with delay-anode read-out for time- and position-sensitive photon counting. The timing precision is better than 1 ns with 1000x1000 pixels position resolution and up to one megacounts/s processing rate. Large format detectors of 40 and 75 mm active diameter with internal helical-wire delay-line anodes have been produced and specified. A different type of…
▽ More
We have developed image intensifier tubes with delay-anode read-out for time- and position-sensitive photon counting. The timing precision is better than 1 ns with 1000x1000 pixels position resolution and up to one megacounts/s processing rate. Large format detectors of 40 and 75 mm active diameter with internal helical-wire delay-line anodes have been produced and specified. A different type of 40 and 25 mm tubes with semi-conducting screen for image charge read-out allow for an economic and robust tube design and for placing the read-out anodes outside the sealed housing. Two types of external delay-line anodes, i.e. pick-up electrodes for the image charge, have been tested. We present tests of the detector and anode performance. Due to the low background this technique is well suited for applications with very low light intensity and especially if a precise time tagging for each photon is required. As an example we present the application of scintillator read-out in time-of-flight (TOF) neutron radiography. Further applications so far are Fluorescence Life-time Microscopy (FLIM) and Astronomy
△ Less
Submitted 19 March, 2007;
originally announced March 2007.
