-
Morphological Control of Bundled Actin Networks Subject to Fixed-Mass Depletion
Authors:
James Clarke,
Lauren Melcher,
Anne D. Crowell,
Francis Cavanna,
Justin R. Houser,
Kristin Graham,
Allison Green,
Jeanne C. Stachowiak,
Thomas M. Truskett,
Delia J. Milliron,
Adrianne M. Rosales,
Moumita Das,
José Alvarado
Abstract:
Depletion interactions are thought to significantly contribute to the organization of intracellular structures in the crowded cytosol. The strength of depletion interactions depends on physical parameters like the depletant number density and the depletant size ratio. Cells are known to dynamically regulate these two parameters by varying the copy number of proteins of a wide distribution of sizes…
▽ More
Depletion interactions are thought to significantly contribute to the organization of intracellular structures in the crowded cytosol. The strength of depletion interactions depends on physical parameters like the depletant number density and the depletant size ratio. Cells are known to dynamically regulate these two parameters by varying the copy number of proteins of a wide distribution of sizes. However, mammalian cells are also known to keep the total protein mass density remarkably constant, to within 0.5% throughout the cell cycle. We thus ask how the strength of depletion interactions varies when the total depletant mass is held fixed, a.k.a. fixed-mass depletion. We answer this question via scaling arguments, as well as by studying depletion effects on networks of reconstituted semiflexible actin $\textit{in silico}$ and $\textit{in vitro}$. We examine the maximum strength of the depletion interaction potential $U^*$ as a function of $q$, the size ratio between the depletant and the matter being depleted. We uncover a scaling relation $U^* \sim q^{-ζ}$ for two cases: fixed volume fraction $φ$ and fixed mass density $ρ$. For fixed volume fraction, we report $ζ< 0$. For the fixed mass density case, we report $ζ> 0$, which suggests the depletion interaction strength increases as the depletant size ratio is increased. To test this prediction, we prepared our filament networks at fixed mass concentrations with varying sizes of the depletant molecule poly(ethylene glycol) (PEG). We characterize the depletion interaction strength in our simulations via the mesh size. In experiments, we observe two distinct actin network morphologies, which we call weakly bundled and strongly bundled. We identify a mass concentration where different PEG depletant sizes leads to weakly bundled or strongly bundled morphologies...[more in main text].
△ Less
Submitted 23 November, 2023;
originally announced December 2023.
-
Dynamics of equilibrium linked colloidal gels
Authors:
Tae** Kwon,
Tanner A. Wilcoxson,
Delia J. Milliron,
Thomas M. Truskett
Abstract:
Colloids that attractively bond to only a few neighbors (e.g., patchy particles) can form equilibrium gels with distinctive dynamic properties that are stable in time. Here, we use a coarse-grained model to explore the dynamics of linked networks of patchy colloids whose average valence is macroscopically, rather than microscopically, constrained. Simulation results for the model show dynamic hall…
▽ More
Colloids that attractively bond to only a few neighbors (e.g., patchy particles) can form equilibrium gels with distinctive dynamic properties that are stable in time. Here, we use a coarse-grained model to explore the dynamics of linked networks of patchy colloids whose average valence is macroscopically, rather than microscopically, constrained. Simulation results for the model show dynamic hallmarks of equilibrium gel formation and establish that the colloid-colloid bond persistence time controls the characteristic slow relaxation of the self-intermediate scattering function. The model features re-entrant network formation without phase separation as a function of linker concentration, centered at the stoichiometric ratio of linker ends to nanoparticle surface bonding sites. Departures from stoichiometry result in linker-starved or site-starved networks with reduced connectivity and shorter characteristic relaxation times with lower activation energies. Underlying the re-entrant trends, dynamic properties vary monotonically with the number of effective network bonds per colloid, a quantity that can be predicted using Wertheim's thermodynamic perturbation theory. These behaviors suggest macroscopic in situ strategies for tuning the dynamical response of colloidal networks.
△ Less
Submitted 9 September, 2022;
originally announced September 2022.
-
Depletion-Driven Morphological Control of Bundled Actin Networks
Authors:
James Clarke,
Francis Cavanna,
Anne D. Crowell,
Lauren Melcher,
Justin R. Houser,
Kristin Graham,
Allison Green,
Jeanne C. Stachowiak,
Thomas M. Truskett,
Delia J. Milliron,
Adrianne M. Rosales,
Moumita Das,
José Alvarado
Abstract:
The actin cytoskeleton is a semiflexible biopolymer network whose morphology is controlled by a wide range of biochemical and physical factors. Actin is known to undergo a phase transition from a single-filament state to a bundled state by the addition of polyethylene glycol (PEG) molecules in sufficient concentration. While the depletion interaction experienced by these biopolymers is well-known,…
▽ More
The actin cytoskeleton is a semiflexible biopolymer network whose morphology is controlled by a wide range of biochemical and physical factors. Actin is known to undergo a phase transition from a single-filament state to a bundled state by the addition of polyethylene glycol (PEG) molecules in sufficient concentration. While the depletion interaction experienced by these biopolymers is well-known, the effect of changing the molecular weight of the depletant is less well understood. Here, we experimentally identify a phase transition in solutions of actin from networks of filaments to networks of bundles by varying the molecular weight of PEG polymers, while holding the concentration of these PEG polymers constant. We examine the states straddling the phase transition in terms of micro and macroscale properties. We find that the mesh size, bundle diameter, persistence length, and intra-bundle spacing between filaments across the line of criticality do not show significant differences, while the relaxation time, storage modulus, and degree of bundling change between the two states do show significant differences. Our results demonstrate the ability to tune actin network morphology and mechanics by controlling depletant size, a property which could be exploited to develop actin-based materials with switchable rigidity.
△ Less
Submitted 1 October, 2022; v1 submitted 3 May, 2022;
originally announced May 2022.
-
Assembling Inorganic Nanocrystal Gels
Authors:
Allison M. Green,
Charles K. Ofosu,
Jiho Kang,
Eric V. Anslyn,
Thomas M. Truskett,
Delia J. Milliron
Abstract:
Inorganic nanocrystal gels retain distinct properties of individual nanocrystals while offering tunable, network structure-dependent characteristics. We review different mechanisms for assembling gels from colloidal nanocrystals including (1) controlled destabilization, (2) direct bridging, (3) depletion, as well as linking mediated by (4) coordination bonding or (5) dynamic covalent bonding, and…
▽ More
Inorganic nanocrystal gels retain distinct properties of individual nanocrystals while offering tunable, network structure-dependent characteristics. We review different mechanisms for assembling gels from colloidal nanocrystals including (1) controlled destabilization, (2) direct bridging, (3) depletion, as well as linking mediated by (4) coordination bonding or (5) dynamic covalent bonding, and we highlight how each impacts gel properties. These approaches use nanocrystal surface chemistry or the addition of small molecules to mediate inter-nanocrystal attractions. Each method offers advantages in terms of gel stability, reversibility, or tunability and presents new opportunities for design of reconfigurable materials and fueled assemblies.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Contact conductance governs metallicity in conducting metal oxide nanocrystal films
Authors:
Corey M. Staller,
Stephen L. Gibbs,
Xing Yee Gan,
Jay T. Bender,
Karalee Jarvis,
Gary K. Ong,
Delia J. Milliron
Abstract:
In bulk semiconductor materials, the insulator-metal transition (IMT) is governed by the concentration of conduction electrons. Meanwhile, even when fabricated from metallic building blocks, nanocrystal films are often insulating with inter-nanocrystal contacts acting as electron transport bottlenecks. Using a library of transparent conducting tin-doped indium oxide nanocrystal films with varied e…
▽ More
In bulk semiconductor materials, the insulator-metal transition (IMT) is governed by the concentration of conduction electrons. Meanwhile, even when fabricated from metallic building blocks, nanocrystal films are often insulating with inter-nanocrystal contacts acting as electron transport bottlenecks. Using a library of transparent conducting tin-doped indium oxide nanocrystal films with varied electron concentration, size, and contact area, we test candidate criteria for the IMT and establish a phase diagram for electron transport behavior. From variable temperature conductivity measurements, we learn that both the IMT and a subsequent crossover to conventional metallic behavior near room temperature are governed by the conductance of the inter-nanocrystal contacts. To cross the IMT, inter-nanocrystal coupling must be sufficient to overcome the charging energy of a nanocrystal, while conventional metallic behavior requires contact conductance to reach the conductance of a nanocrystal. This understanding can enable the design and fabrication of metallic conducting materials from nanocrystal building blocks.
△ Less
Submitted 15 February, 2022; v1 submitted 20 November, 2021;
originally announced November 2021.
-
Sculpting the plasmonic responses of nanoparticles by directed electron beam irradiation
Authors:
Kevin M. Roccapriore,
Shin-Hum Cho,
Andrew R. Lupini,
Delia J. Milliron,
Sergei V. Kalinin
Abstract:
Spatial confinement of matter in functional nanostructures has propelled these systems to the forefront of nanoscience, both as a playground for exotic physics and quantum phenomena and in multiple applications including plasmonics, optoelectronics, and sensing. In parallel, the emergence of monochromated electron energy loss spectroscopy (EELS) has enabled exploration of local nanoplasmonic funct…
▽ More
Spatial confinement of matter in functional nanostructures has propelled these systems to the forefront of nanoscience, both as a playground for exotic physics and quantum phenomena and in multiple applications including plasmonics, optoelectronics, and sensing. In parallel, the emergence of monochromated electron energy loss spectroscopy (EELS) has enabled exploration of local nanoplasmonic functionalities within single nanoparticles and the collective response of nanoparticle assemblies, providing deep insight into the associated mechanisms. However, modern synthesis processes for plasmonic nanostructures are often limited in the types of accessible geometry and materials, and even then, limited to spatial precisions on the order of tens of nm, precluding the direct exploration of critical aspects of the structure-property relationships. Here, we use the atomic-sized probe of the scanning transmission electron microscope (STEM) to perform precise sculpting and design of nanoparticle configurations. Furthermore, using low-loss (EELS), we provide dynamic analyses of evolution of the plasmonic response during the sculpting process. We show that within self-assembled systems of nanoparticles, individual nanoparticles can be selectively removed, reshaped, or arbitrarily patterned with nanometer-level resolution, effectively modifying the plasmonic response in both space and energy domains. This process significantly increases the scope for design possibilities and presents opportunities for arbitrary structure development, which are ultimately key for nanophotonic design. Nanosculpting introduces yet another capability to the electron microscope.
△ Less
Submitted 5 April, 2021;
originally announced April 2021.
-
Effects of linker flexibility on phase behavior and structure of linked colloidal gels
Authors:
Michael P. Howard,
Zachary M. Sherman,
Adithya N Sreenivasan,
Stephanie A. Valenzuela,
Eric V. Anslyn,
Delia J. Milliron,
Thomas M. Truskett
Abstract:
Colloidal nanocrystal gels can be assembled using a difunctional "linker" molecule to mediate bonding between nanocrystals. The conditions for gelation and the structure of the gel are controlled macroscopically by the linker concentration and microscopically by the linker's molecular characteristics. Here, we demonstrate using a toy model for a colloid-linker mixture that linker flexibility plays…
▽ More
Colloidal nanocrystal gels can be assembled using a difunctional "linker" molecule to mediate bonding between nanocrystals. The conditions for gelation and the structure of the gel are controlled macroscopically by the linker concentration and microscopically by the linker's molecular characteristics. Here, we demonstrate using a toy model for a colloid-linker mixture that linker flexibility plays a key role in determining both phase behavior and structure of the mixture. We fix the linker length and systematically vary its bending stiffness to span the flexible, semiflexible, and rigid regimes. At fixed linker concentration, flexible-linker and rigid-linker mixtures phase separate at low colloid volume fractions in agreement with predictions of first-order thermodynamic perturbation theory, but the semiflexible-linker mixtures do not. We correlate and attribute this qualitatively different behavior to undesirable "loop" linking motifs that are predicted to be more prevalent for linkers with end-to-end distances commensurate with the locations of chemical bonding sites on the colloids. Linker flexibility also influences the spacing between linked colloids, suggesting strategies to design gels with desired phase behavior, structure, and by extension, structure-dependent properties.
△ Less
Submitted 24 November, 2020;
originally announced November 2020.
-
Wertheim's thermodynamic perturbation theory with double-bond association and its application to colloid-linker mixtures
Authors:
Michael P. Howard,
Zachary M. Sherman,
Delia J. Milliron,
Thomas M. Truskett
Abstract:
We extend Wertheim's thermodynamic perturbation theory to derive the association free energy of a multicomponent mixture for which double bonds can form between any two pairs of the molecules' arbitrary number of bonding sites. This generalization reduces in limiting cases to prior theories that restrict double bonding to at most one pair of sites per molecule. We apply the new theory to an associ…
▽ More
We extend Wertheim's thermodynamic perturbation theory to derive the association free energy of a multicomponent mixture for which double bonds can form between any two pairs of the molecules' arbitrary number of bonding sites. This generalization reduces in limiting cases to prior theories that restrict double bonding to at most one pair of sites per molecule. We apply the new theory to an associating mixture of colloidal particles ("colloids") and flexible chain molecules ("linkers"). The linkers have two functional end groups, each of which may bond to one of several sites on the colloids. Due to their flexibility, a significant fraction of linkers can "loop" with both ends bonding to sites on the same colloid instead of bridging sites on different colloids. We use the theory to show that the fraction of linkers in loops depends sensitively on the linker end-to-end distance relative to the colloid bonding-site distance, which suggests strategies for mitigating the loop formation that may otherwise hinder linker-mediated colloidal assembly.
△ Less
Submitted 10 December, 2020; v1 submitted 15 October, 2020;
originally announced October 2020.
-
Separating physically distinct mechanisms in complex infrared plasmonic nanostructures via machine learning enhanced electron energy loss spectroscopy
Authors:
Sergei V. Kalinin,
Kevin M. Roccapriore,
Shin Hum Cho,
Delia J. Milliron,
Rama Vasudevan,
Maxim Ziatdinov,
Jordan A. Hachtel
Abstract:
Low-loss electron energy loss spectroscopy (EELS) has emerged as a technique of choice for exploring the localization of plasmonic phenomena at the nanometer level, necessitating analysis of physical behaviors from 3D spectral data sets. For systems with high localization, linear unmixing methods provide an excellent basis for exploratory analysis, while in more complex systems large numbers of co…
▽ More
Low-loss electron energy loss spectroscopy (EELS) has emerged as a technique of choice for exploring the localization of plasmonic phenomena at the nanometer level, necessitating analysis of physical behaviors from 3D spectral data sets. For systems with high localization, linear unmixing methods provide an excellent basis for exploratory analysis, while in more complex systems large numbers of components are needed to accurately capture the true plasmonic response and the physical interpretability of the components becomes uncertain. Here, we explore machine learning based analysis of low-loss EELS data on heterogeneous self-assembled monolayer films of doped-semiconductor nanoparticles, which support infrared resonances. We propose a pathway for supervised analysis of EELS datasets that separate and classify regions of the films with physically distinct spectral responses. The classifications are shown to be robust, to accurately capture the common spatiospectral tropes of the complex nanostructures, and to be transferable between different datasets to allow high-throughput analysis of large areas of the sample. As such, it can be used as a basis for automated experiment workflows based on Bayesian optimization, as demonstrated on the ex situ data. We further demonstrate the use of non-linear autoencoders (AE) combined with clustering in the latent space of the AE yields highly reduced representations of the system response that yield insight into the relevant physics that do not depend on operator input and bias. The combination of these supervised and unsupervised tools provides complementary insight into the nanoscale plasmonic phenomena.
△ Less
Submitted 17 September, 2020;
originally announced September 2020.
-
Universal Gelation of Metal Oxide Nanocrystals via Depletion Attractions
Authors:
Camila A. Saez Cabezas,
Zachary M. Sherman,
Michael P. Howard,
Manuel N. Dominguez,
Shin Hum Cho,
Gary K. Ong,
Allison Green,
Thomas M. Truskett,
Delia J. Milliron
Abstract:
Nanocrystal gelation provides a powerful framework to translate nanoscale properties into bulk materials and to engineer emergent properties through the assembled microstructure. However, many established gelation strategies rely on chemical reactions and specific interactions, e.g., stabilizing ligands or ions on the surface of the nanocrystals, and are therefore not easily transferrable. Here, w…
▽ More
Nanocrystal gelation provides a powerful framework to translate nanoscale properties into bulk materials and to engineer emergent properties through the assembled microstructure. However, many established gelation strategies rely on chemical reactions and specific interactions, e.g., stabilizing ligands or ions on the surface of the nanocrystals, and are therefore not easily transferrable. Here, we report a general gelation strategy via non-specific and purely entropic depletion attractions applied to three types of metal oxide nanocrystals. The gelation thresholds of two compositionally distinct spherical nanocrystals agree quantitatively, demonstrating the adaptability of the approach for different chemistries. Consistent with theoretical phase behavior predictions, nanocrystal cubes form gels at a lower polymer concentration than nanocrystal spheres, allowing shape to serve as a handle to control gelation. These results suggest that the fundamental underpinnings of depletion-driven assembly, traditionally associated with larger colloidal particles, are also applicable at the nanoscale.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
-
Structure and phase behavior of polymer-linked colloidal gels
Authors:
Michael P. Howard,
Ryan B. Jadrich,
Beth A. Lindquist,
Fardin Khabaz,
Roger T. Bonnecaze,
Delia J. Milliron,
Thomas M. Truskett
Abstract:
Low-density "equilibrium" gels that consist of a percolated, kinetically arrested network of colloidal particles and are resilient to aging can be fabricated by restricting the number of effective bonds that form between the colloids. Valence-restricted patchy particles have long served as one archetypal example of such materials, but equilibrium gels can also be realized through a synthetically s…
▽ More
Low-density "equilibrium" gels that consist of a percolated, kinetically arrested network of colloidal particles and are resilient to aging can be fabricated by restricting the number of effective bonds that form between the colloids. Valence-restricted patchy particles have long served as one archetypal example of such materials, but equilibrium gels can also be realized through a synthetically simpler and scalable strategy that introduces a secondary linker, such as a small ditopic molecule, to mediate the bonds between the colloids. Here, we consider the case where the ditopic linker molecules are low-molecular-weight polymers and demonstrate using a model colloid-polymer mixture how macroscopic properties such as the phase behavior as well as the microstructure of the gel can be designed through the polymer molecular weight and concentration. The low-density window for equilibrium gel formation is favorably expanded using longer linkers, while necessarily increasing the spacing between all colloids. However, we show that blends of linkers with different sizes enable wider variation in microstructure for a given target phase behavior. Our computational study suggests a robust and tunable strategy for the experimental realization of equilibrium colloidal gels.
△ Less
Submitted 10 July, 2019;
originally announced July 2019.
-
Intrinsic Optical and Electronic Properties from Quantitative Analysis of Plasmonic Semiconductor Nanocrystal Ensemble Optical Extinction
Authors:
Stephen L. Gibbs,
Corey M. Staller,
Ankit Agrawal,
Robert W. Johns,
Camila A. Saez Cabezas,
Delia J. Milliron
Abstract:
The optical extinction spectra arising from localized surface plasmon resonance in doped semiconductor nanocrystals (NCs) have intensities and lineshapes determined by free charge carrier concentrations and the various mechanisms for dam** the oscillation of those free carriers. However, these intrinsic properties are convoluted by heterogeneous broadening when measuring spectra of ensembles. We…
▽ More
The optical extinction spectra arising from localized surface plasmon resonance in doped semiconductor nanocrystals (NCs) have intensities and lineshapes determined by free charge carrier concentrations and the various mechanisms for dam** the oscillation of those free carriers. However, these intrinsic properties are convoluted by heterogeneous broadening when measuring spectra of ensembles. We reveal that the traditional Drude approximation is not equipped to fit spectra from a heterogeneous ensemble of doped semiconductor NCs and produces fit results that violate Mie scattering theory. The heterogeneous ensemble Drude approximation (HEDA) model rectifies this issue by accounting for ensemble heterogeneity and near-surface depletion. The HEDA model is applied to tin-doped indium oxide NCs for a range of sizes and do** levels but we expect it can be employed for any isotropic plasmonic particles in the quasistatic regime. It captures individual NC optical properties and their contributions to the ensemble spectra thereby enabling the analysis of intrinsic NC properties from an ensemble measurement. Quality factors for the average NC in each ensemble are quantified and found to be notably higher than those of the ensemble. Carrier mobility and conductivity derived from HEDA fits matches that measured in the bulk thin film literature.
△ Less
Submitted 25 September, 2020; v1 submitted 25 December, 2018;
originally announced December 2018.
-
Gelation of Plasmonic Metal Oxide Nanocrystals by Polymer-Induced Depletion-Attractions
Authors:
Camila A. Saez Cabezas,
Gary K. Ong,
Ryan B. Jadrich,
Beth A. Lindquist,
Ankit Agrawal,
Thomas M. Truskett,
Delia J. Milliron
Abstract:
Gelation of colloidal nanocrystals (NCs) emerged as a strategy to preserve inherent nanoscale properties in multiscale architectures. Yet available gelation methods still struggle to reliably control nanoscale optical phenomena such as photoluminescence and localized surface plasmon resonance (LSPR) across NC systems due to processing variability. Here, we report on an alternative gelation method…
▽ More
Gelation of colloidal nanocrystals (NCs) emerged as a strategy to preserve inherent nanoscale properties in multiscale architectures. Yet available gelation methods still struggle to reliably control nanoscale optical phenomena such as photoluminescence and localized surface plasmon resonance (LSPR) across NC systems due to processing variability. Here, we report on an alternative gelation method based on physical inter-NC interactions: short-range depletion-attractions balanced by long-range electrostatic repulsions. The latter are established by removing the native organic ligands that passivate tin-doped indium oxide (ITO) NCs while the former are introduced by mixing with small polyethylene glycol (PEG) chains. As we incorporate increasing concentrations of PEG, we observe a reentrant phase behavior featuring two favorable gelation windows; the first arises from bridging effects while the second is attributed to depletion-attractions according to phase behavior predicted by our unified theoretical model. The NCs remain discrete within the gel network, based on X-ray scattering and high-resolution transmission electron microscopy. The infrared optical response of the gel is reflective of both the NC building blocks and the network architecture, being characteristic of ITO NC LSPR with coupling interactions between neighboring NCs.
△ Less
Submitted 24 April, 2018;
originally announced April 2018.
-
Tuning Nanocrystal Surface Depletion by Controlling Dopant Distribution as a Route Toward Enhanced Film Conductivity
Authors:
Corey M. Staller,
Zachary L. Robinson,
Ankit Agrawal,
Stephen L. Gibbs,
Benjamin L. Greenberg,
Sebastien D. Lounis,
Uwe R. Kortshagen,
Delia J. Milliron
Abstract:
Electron conduction through bare metal oxide nanocrystal (NC) films is hindered by surface depletion regions resulting from the presence of surface states. We control the radial dopant distribution in tin-doped indium oxide (ITO) NCs as a means to manipulate the NC depletion width. We find in films of ITO NCs of equal overall dopant concentration that those with dopant-enriched surfaces show decre…
▽ More
Electron conduction through bare metal oxide nanocrystal (NC) films is hindered by surface depletion regions resulting from the presence of surface states. We control the radial dopant distribution in tin-doped indium oxide (ITO) NCs as a means to manipulate the NC depletion width. We find in films of ITO NCs of equal overall dopant concentration that those with dopant-enriched surfaces show decreased depletion width and increased conductivity. Variable temperature conductivity data shows electron localization length increases and associated depletion width decreases monotonically with increased density of dopants near the NC surface. We calculate band profiles for NCs of differing radial dopant distributions and, in agreement with variable temperature conductivity fits, find NCs with dopant-enriched surfaces have narrower depletion widths and longer localization lengths than those with dopant-enriched cores. Following amelioration of NC surface depletion by atomic layer deposition of alumina, all films of equal overall dopant concentration have similar conductivity. Variable temperature conductivity measurements on alumina-capped films indicate all films behave as granular metals. Herein, we conclude that dopant-enriched surfaces decrease the near-surface depletion region, which directly increases the electron localization length and conductivity of NC films.
△ Less
Submitted 2 January, 2018;
originally announced January 2018.
-
Impacts of Surface Depletion on the Plasmonic Properties of Doped Semiconductor Nanocrystals
Authors:
Omid Zandi,
Ankit Agrawal,
Alex B. Shearer,
Lauren C. Gilbert,
Clayton J. Dahlman,
Corey M. Staller,
Delia J. Milliron
Abstract:
Degenerately doped semiconductor nanocrystals (NCs) exhibit a localized surface plasmon resonance (LSPR) in the infrared range of the electromagnetic spectrum. Unlike metals, semiconductor NCs offer tunable LSPR characteristics enabled by do**, or via electrochemical or photochemical charging. Tuning plasmonic properties through carrier density modulation suggests potential applications in smart…
▽ More
Degenerately doped semiconductor nanocrystals (NCs) exhibit a localized surface plasmon resonance (LSPR) in the infrared range of the electromagnetic spectrum. Unlike metals, semiconductor NCs offer tunable LSPR characteristics enabled by do**, or via electrochemical or photochemical charging. Tuning plasmonic properties through carrier density modulation suggests potential applications in smart optoelectronics, catalysis, and sensing. Here, we elucidate fundamental aspects of LSPR modulation through dynamic carrier density tuning in Sn-doped Indium Oxide NCs. Monodisperse Sn-doped Indium Oxide NCs with various do** level and sizes were synthesized and assembled in uniform films. NC films were then charged in an in situ electrochemical cell and the LSPR modulation spectra were monitored. Based on spectral shifts and intensity modulation of the LSPR, combined with optical modeling, it was found that often-neglected semiconductor properties, specifically band structure modification due to do** and surface states, strongly affect LSPR modulation. Fermi level pinning by surface defect states creates a surface depletion layer that alters the LSPR properties; it determines the extent of LSPR frequency modulation, diminishes the expected near field enhancement, and strongly reduces sensitivity of the LSPR to the surroundings.
△ Less
Submitted 2 January, 2018; v1 submitted 20 September, 2017;
originally announced September 2017.
-
Interactions and design rules for assembly of porous colloidal mesophases
Authors:
Beth A. Lindquist,
Sayantan Dutta,
Ryan B. Jadrich,
Delia J. Milliron,
Thomas M. Truskett
Abstract:
Porous mesophases, where well-defined particle-depleted 'void' spaces are present within a particle-rich background fluid, can be self-assembled from colloidal particles interacting via isotropic pair interactions with competing attractions and repulsions. While such structures could be of wide interest for technological applications (e.g., filtration, catalysis, absorption, etc.), relatively few…
▽ More
Porous mesophases, where well-defined particle-depleted 'void' spaces are present within a particle-rich background fluid, can be self-assembled from colloidal particles interacting via isotropic pair interactions with competing attractions and repulsions. While such structures could be of wide interest for technological applications (e.g., filtration, catalysis, absorption, etc.), relatively few studies have investigated the interactions that lead to these morphologies and how they compare to those that produce other micro-phase-separated structures, such as clusters. In this work, we use inverse methods of statistical mechanics to design model isotropic pair potentials that form porous mesophases. We characterize the resulting porous structures, correlating features of the pair potential with the targeted pore size and the particle packing fraction. The former is primarily encoded by the amplitude and range of the repulsive barrier of the designed pair potential and the latter by the attractive well depth. We observe a trade-off with respect to the packing fraction of the targeted morphology: greater values support more spherical and monodisperse pores that themselves organize into periodic structures, while lower values yield more mobile pores that do not assemble into ordered structures but remain stable over a larger range of packing fraction. We conclude by commenting on the limitations of targeting a specific pore diameter within the present inverse design approach as well as by describing future directions to overcome these limitations.
△ Less
Submitted 11 January, 2017; v1 submitted 6 December, 2016;
originally announced December 2016.
-
On the Formation of Equilibrium Gels via a Macroscopic Bond Limitation
Authors:
Beth A. Lindquist,
Ryan B. Jadrich,
Delia J. Milliron,
Thomas M. Truskett
Abstract:
Restricting the number of attractive physical "bonds" that can form between particles in a fluid suppresses the usual demixing phase transition to very low particle concentrations, allowing for the formation of open, percolated, and homogeneous states, aptly called equilibrium or "empty" gels. Most demonstrations of this concept have directly limited the microscopic particle valence via anisotropi…
▽ More
Restricting the number of attractive physical "bonds" that can form between particles in a fluid suppresses the usual demixing phase transition to very low particle concentrations, allowing for the formation of open, percolated, and homogeneous states, aptly called equilibrium or "empty" gels. Most demonstrations of this concept have directly limited the microscopic particle valence via anisotropic (patchy) attractions; however, an alternative macroscopic valence limitation would be desirable for greater experimental tunability and responsiveness. One possibility, explored in this paper, is to employ primary particles with attractions mediated via a secondary species of linking particles. In such a system, the linker-to-primary particle ratio serves as a macroscopic control parameter for the average microscopic valence. We show that the phase behavior of such a system predicted by Wertheim's first order perturbation theory is consistent with equilibrium gel formation: the primary particle concentrations corresponding to the two-phase demixing transition are significantly suppressed at both low and high linker-to-primary particle ratios. Extensive molecular dynamics simulations validate these theoretical predictions but also reveal the presence of loops of bonded particles, which are neglected in the theory. Such loops cause densification and inhibit percolation, and hence the range of viable empty gel state conditions is somewhat reduced relative to the Wertheim theory predictions.
△ Less
Submitted 28 July, 2016; v1 submitted 24 May, 2016;
originally announced May 2016.