-
Energy dispersion compensation and beam loading in X-band linacs for the JLC/NLC
Authors:
R. M. Jones,
V. A. Dolgashev,
R. H. Miller,
C. Adolphsen,
J. W. Wang
Abstract:
The shape of an RF pulse is distorted upon propagating through an X-band accelerator structure due to dispersive effects. This distortion together with beam loading introduce energy spread between 192 bunches. In order to minimize this energy spread we modify the input RF pulse shape. The pulse propagation, energy gain, and beam loading are modelled with a mode-matching computer code and a circu…
▽ More
The shape of an RF pulse is distorted upon propagating through an X-band accelerator structure due to dispersive effects. This distortion together with beam loading introduce energy spread between 192 bunches. In order to minimize this energy spread we modify the input RF pulse shape. The pulse propagation, energy gain, and beam loading are modelled with a mode-matching computer code and a circuit model. A 2D model and a circuit model of a complete 60 cm structure, consisting of 55 cells and input and output couplers is analyzed. This structure operates with a 5pi/6 phase advance per cell. Dispersive effects for this structure are more significant than for previously studied 2pi/3 phase advance accelerating structures. Experimental results are compared with the theoretical model and excellent agreement is obtained for the propagation of an RF pulse through the structure.
△ Less
Submitted 4 July, 2003;
originally announced July 2003.
-
A Resonant Cavity for Single-Shot Emittance Measurement
Authors:
J. S. Kim,
C. D. Nantista,
D. H. Whittum,
R. H. Miller,
S. G. Tantawi,
A. W. Weidemann
Abstract:
We present a non-invasive, resonant cavity based approach to beam emittance measurement of a shot-to-shot non-circular beam pulse of multi-bunches. In a resonant cavity, desired field components can be enhanced up to Q_L_lambda/pi, where Q_L_lambda is the loaded Q of the resonance mode lambda, when the cavity resonant mode matches with the beam operating frequency. In particular, a Quad-cavity,…
▽ More
We present a non-invasive, resonant cavity based approach to beam emittance measurement of a shot-to-shot non-circular beam pulse of multi-bunches. In a resonant cavity, desired field components can be enhanced up to Q_L_lambda/pi, where Q_L_lambda is the loaded Q of the resonance mode lambda, when the cavity resonant mode matches with the beam operating frequency. In particular, a Quad-cavity, with its quadrupole mode at beam operating frequency, extracts the beam quad-moment exclusively, utilizing the symmetry of the cavity and some simple networks to suppress common modes. Six successive beam quadrupole moment measurements, performed at different betatron phases in a linear transport system, allow us to determine the beam emittance, i.e., the beam size and shape in the beam's phase space. One measurement alone provides the rms-beam size if the beam position is given, for instance, by nearby beam-position-monitors. This paper describes the basic design and analysis of a Quad-cavity beam monitoring system.
△ Less
Submitted 18 September, 2002;
originally announced September 2002.
-
Minimization of Transverse Wakefields in the NLC Accelerator Structures
Authors:
R. M. Jones,
R. H. Miller,
J. W Wang
Abstract:
The progress of a multiple bunches of electrons through several thousand accelerator structures results in a wakefield which if left unchecked will kick successive bunches off the axis of the accelerator and can at the very least dilute the final luminosity of the final colliding beams, or at worst can lead to a BBU (Beam Break Up) instability. In order to damp the wakefields to acceptable level…
▽ More
The progress of a multiple bunches of electrons through several thousand accelerator structures results in a wakefield which if left unchecked will kick successive bunches off the axis of the accelerator and can at the very least dilute the final luminosity of the final colliding beams, or at worst can lead to a BBU (Beam Break Up) instability. In order to damp the wakefields to acceptable levels for travelling wave structures we detune the frequencies of the cells and we couple out the field to four adjacent manifolds. Optimizing the manifold-cell coupling for several hundred cells and changing the bandwidth parameters of the distribution has in previous structures been achieved by a process of trial and error. Here, we report on an optimized Fortran code that has been specifically written with the aim minimizing the sum of the squares of the RMS and standard deviation of the sum wakefield. Sparse matrix techniques are employed to reduce the computational time required for each frequency step. The wakefield is minimized whilst ensuring that no significant local surface heating occurs due to slots cuts into the accelerator cells to couple out the wakefield.
△ Less
Submitted 16 August, 2002;
originally announced August 2002.
-
Tuning And Field Sensitivity Of Pi-Mode Standing Wave Linacs For The NLC
Authors:
R. M. Jones,
R. H. Miller,
J. W. Wang,
P. B. Wilson
Abstract:
In order to mitigate the effects of electrical breakdown (which have been found to occur in SLAC X-band traveling wave structures) standing wave structures are being considered for the NLC linac. At SLAC, structures consisting of 15 cells operating in the p accelerating mode are being tested for their electrical breakdown characteristics. In this paper the tuning requirement on the cavities is e…
▽ More
In order to mitigate the effects of electrical breakdown (which have been found to occur in SLAC X-band traveling wave structures) standing wave structures are being considered for the NLC linac. At SLAC, structures consisting of 15 cells operating in the p accelerating mode are being tested for their electrical breakdown characteristics. In this paper the tuning requirement on the cavities is elucidated by utilizing a circuit model of the structure. The sensitivity of the field to both random and systematic errors is also discussed.
△ Less
Submitted 27 June, 2002;
originally announced June 2002.
-
Manifold Dam** Of Wakefields In High Phase Advance Linacs For The NLC
Authors:
R. M. Jones,
Z. Li,
R. H. Miller,
T. O. Raubenheimer,
R. D. Ruth,
G. V. Stupakov,
J. W. Wang,
N. M. Kroll
Abstract:
Earlier RDDS (Rounded Damped Detuned Structures) [1,2], designed, fabricated and tested at SLAC, in collaboration with KEK, have been shown to damp wakefields successfully. However, electrical breakdown has been found to occur in these structures and this makes them inoperable at the desired gradient. Recent results [3] indicate that lowering the group velocity of the accelerating mode reduces e…
▽ More
Earlier RDDS (Rounded Damped Detuned Structures) [1,2], designed, fabricated and tested at SLAC, in collaboration with KEK, have been shown to damp wakefields successfully. However, electrical breakdown has been found to occur in these structures and this makes them inoperable at the desired gradient. Recent results [3] indicate that lowering the group velocity of the accelerating mode reduces electrical breakdown events. In order to preserve the filling time of each structure a high synchronous phase advance (150 degrees as opposed to 120 used in previous NLC designs) has been chosen. Here, dam** of the wakefield is analyzed. Manifold dam** and interleaving of structure cell frequencies is discussed. These wakefields impose alignment tolerances on the cells and on the structure as a whole. Tolerance calculations are performed and these are compared with analytic estimations.
△ Less
Submitted 27 June, 2002;
originally announced June 2002.
-
Room temperature accelerator structures for linear colliders
Authors:
R. H. Miller,
R. M. Jones,
C. Adolphsen,
G. Bowden,
V. Dolgashev,
N. Kroll Z. Li,
R. Loewen,
C. Ng,
C. Pearson,
T. Raubenheimer R. Ruth,
S. Tantawi,
J. W. Wang
Abstract:
Early tests of short low group velocity and standing wave structures indicated the viability of operating X-band linacs with accelerating gradients in excess of 100 MeV/m. Conventional scaling of traveling wave traveling wave linacs with frequency scales the cell dimensions with l. Because Q scales as l1/2, the length of the structures scale not linearly but as l3/2 in order to preserve the atte…
▽ More
Early tests of short low group velocity and standing wave structures indicated the viability of operating X-band linacs with accelerating gradients in excess of 100 MeV/m. Conventional scaling of traveling wave traveling wave linacs with frequency scales the cell dimensions with l. Because Q scales as l1/2, the length of the structures scale not linearly but as l3/2 in order to preserve the attenuation through each structure. For NLC we chose not to follow this scaling from the SLAC S-band linac to its fourth harmonic at X-band. We wanted to increase the length of the structures to reduce the number of couplers and waveguide drives which can be a significant part of the cost of a microwave linac. Furthermore, scaling the iris size of the disk-loaded structures gave unacceptably high short range dipole wakefields. Consequently, we chose to go up a factor of about 5 in average group velocity and length of the structures, which increases the power fed to each structure by the same factor and decreases the short range dipole wakes by a similar factor. Unfortunately, these longer (1.8 m) structures have not performed nearly as well in high gradient tests as the short structures. We believe we have at least a partial understanding of the reason and will discuss it below. We are now studying two types of short structures with large apertures with moderately good efficiency including: 1) traveling wave structures with the group velocity lowered by going to large phase advance per period with bulges on the iris, 2) pi mode standing wave structures
△ Less
Submitted 29 August, 2001;
originally announced August 2001.
-
Dipole Wakefield Suppression In High Phase Advance Detuned Linear Accelerators For The JLC/NLC Designed To Minimise Electrical Breakdown And Cumulative BBU
Authors:
R. M. Jones,
N. M. Kroll,
T. Higo,
Z. Li,
R. H. Miller,
T. O. Raubenheimer,
J. W. Wang
Abstract:
Recent experiments at SLAC [1,2] and CERN [3] have revealed evidence of significant deformation in the form of "pitting" of the cells of the 1.8m series of structures DDS/RDDS (Damped Detuned Structure/Rounded Damped Detuned Structure). This pitting occurs in the high group velocity (vg /c = 0.012) end of the accelerating structure and little evidence of breakdown has been found in the lower gro…
▽ More
Recent experiments at SLAC [1,2] and CERN [3] have revealed evidence of significant deformation in the form of "pitting" of the cells of the 1.8m series of structures DDS/RDDS (Damped Detuned Structure/Rounded Damped Detuned Structure). This pitting occurs in the high group velocity (vg /c = 0.012) end of the accelerating structure and little evidence of breakdown has been found in the lower group velocity end of the structure. Additional, albeit preliminary experimental evidence, suggests that shorter and lower group velocity structures have reduced breakdown events with increasing accelerating field strengths. Two designs are presented here, firstly a 90cm structure consisting of 83 cells with an initial vg/c = 0.0506 (known as H90VG5) and secondly, an even shorter structure of length 60cm consisting of 55 cells with an initial vg /c = 0.03 (known as H60VG3). The feasibility of using these structures to accelerate a charged beam over 10km is investigated. The particular issue focussed upon is suppression of the dipole wakefields via detuning of the cell frequencies and by locally dam** individual cells in order to avoid BBU (Beam Break Up). Results are presented on beam-induced dipole wakefields and on the beam dynamics encountered on tracking the progress of the beam through several thousand accelerating structures.
[1] C. Adolphsen, ROAA003, this conf. [2] R.H. Miller et al, FPAH062, this conf. [3] L. Groening et al, MPPH039, this conf
△ Less
Submitted 19 July, 2001;
originally announced July 2001.
-
Manifold Dam** of Transverse Wakefields in High Phase Advance Traveling Wave Structures and Local Dam** of Dipole Wakefields in Standing Wave Accelerators
Authors:
R. M. Jones,
N. M. Kroll,
T. Higo,
R. H. Miller,
R. D Ruth
Abstract:
Operating the SLAC/KEK DDS (Damped Detuned Structure) X-band linacs at high gradients (in excess of 70MV/m) has recently been found to be limited by the accelerator structures breaking down and as a consequence severe damage occurs to the cells which makes the structures inoperable. A series of recent experiments at SLAC indicates that arcing in the structures is significantly reduced if the gro…
▽ More
Operating the SLAC/KEK DDS (Damped Detuned Structure) X-band linacs at high gradients (in excess of 70MV/m) has recently been found to be limited by the accelerator structures breaking down and as a consequence severe damage occurs to the cells which makes the structures inoperable. A series of recent experiments at SLAC indicates that arcing in the structures is significantly reduced if the group velocity of the accelerating mode is reduced and additionally it has been discovered that reducing the length of the accelerating structure also limits the number and intensity of breakdown events [1]. However, in designing new accelerating structures care must be taken to ensure that the beam-induced transverse wakefields do not cause the beam to become unstable. Here, we report on dam** transverse wakefields in two different short structures: a 90cm traveling wave structure in which the wakefield is coupled out to four attached manifolds and secondly, in a standing wave structure in which a limited number of cells heavily damp down the wakefield.
[1] C. Adolphsen, ROAA003, this conf.
△ Less
Submitted 19 July, 2001;
originally announced July 2001.
-
Design of the JLC/NLC RDDS Structure Using Parallel Eigensolver Omega3p
Authors:
Z. Li,
N. T. Folwell,
K. Ko,
R. J. Loewen,
E. W. Lundahl,
B. McCandless,
R. H. Miller,
R. D. Ruth,
M. D. Starkey,
Y. Sun,
J. W. Wang,
T. Higo
Abstract:
The complexity of the Round Damped Detuned Structue (RDDS) for the JLC/NLC main linac is driven by the considerations of rf efficiency and dipole wakefield suppression. As a time and cost saving measure for the JLC/NLC, the dimensions of the 3D RDDS cell are being determined through computer modeling to within fabrication precision so that no tuning may be needed once the structures are assemble…
▽ More
The complexity of the Round Damped Detuned Structue (RDDS) for the JLC/NLC main linac is driven by the considerations of rf efficiency and dipole wakefield suppression. As a time and cost saving measure for the JLC/NLC, the dimensions of the 3D RDDS cell are being determined through computer modeling to within fabrication precision so that no tuning may be needed once the structures are assembled. The tolerances on the frequency errors for the RDDS structure are about one MHz for the fundamental mode and a few MHz for the dipole modes. At the X-band frequency, these correspond to errors of a micron level on the major cell dimensions. Such a level of resolution requires highly accurate field solvers and vast amount of computer resources. A parallel finite-element eigensolver Omega3P was developed at SLAC that runs on massively parallel computers such as the Cray T3E at NERSC. The code was applied in the design of the RDDS cell dimensions that are accurate to within fabrication precision. We will present the numerical approach of using these codes to determine the RDDS dimensions and compare the numerical predictions with the cold test measurements on RDDS prototypes that are diamond-turned using these dimensions.
△ Less
Submitted 8 September, 2000;
originally announced September 2000.
-
Design, fabrication and measurement of the first rounded damped detuned accelerator structure (RDDS1)
Authors:
J. W. Wang,
C. Adolphsen,
G. B. Bowden,
D. L. Burke,
J. Cornuelle,
V. A. Dolgashev,
W. B. Fowkes,
R. K. Jobe,
R. M. Jones,
K. Ko,
N. Kroll,
Z. Li,
R. J. Loewen,
D. McCormick,
R. H. Miller,
C. K. Ng,
C. Pearson,
T. O. Raubenhemer,
R. Reed,
M. Ross,
R. D. Ruth,
T. Smith,
G. Stupakov,
T. Higo,
Y. Funahashi
, et al. (8 additional authors not shown)
Abstract:
As a joint effort in the JLC/NLC research program, we have developed a new type of damped detuned accelerator structure with optimized round-shaped cavities (RDDS). This paper discusses some important R&D aspects of the first structure in this series (RDDS1). The design aspects covered are the cell design with sub-MHz precision, HOM detuning, coupling and dam** technique and wakefield simulati…
▽ More
As a joint effort in the JLC/NLC research program, we have developed a new type of damped detuned accelerator structure with optimized round-shaped cavities (RDDS). This paper discusses some important R&D aspects of the first structure in this series (RDDS1). The design aspects covered are the cell design with sub-MHz precision, HOM detuning, coupling and dam** technique and wakefield simulation. The fabrication issues covered are ultra-precision cell machining with micron accuracy, assembly and diffusion bonding technologies to satisfactorily meet bookshelf, straightness and cell rotational alignment requirements. The measurements described are the RF properties of single cavities and complete accelerator section, as well as wakefields from the ASSET tests at SLAC. Finally, future improvements are also discussed.
△ Less
Submitted 6 September, 2000;
originally announced September 2000.
-
Local and Fundamental Mode Coupler Dam** of the Transverse Wakefield in RDDS1 Linacs
Authors:
R. M. Jones,
N. M. Kroll,
R. H. Miller,
C. K. Ng,
J. W. Wang
Abstract:
In dam** the wakefield generated by an electron beam traversing several thousand X-band linacs in the NLC we utilise a Gaussian frequency distribution of dipole modes to force the modes to deconstructively interfere, supplemented with moderate dam** achieved by coupling these modes to four attached manifolds. Most of these modes are adequately damped by the manifolds. However, the modes towa…
▽ More
In dam** the wakefield generated by an electron beam traversing several thousand X-band linacs in the NLC we utilise a Gaussian frequency distribution of dipole modes to force the modes to deconstructively interfere, supplemented with moderate dam** achieved by coupling these modes to four attached manifolds. Most of these modes are adequately damped by the manifolds. However, the modes towards the high frequency end of the lower dipole band are not adequately damped because the last few cells are, due to mechanical fabrication requirements, not coupled to the manifolds. To mitigate this problem in the present RDDS1 design, the output coupler for the accelerating mode has been designed so as to also couple out those dipole modes which reach the output coupler cell. In order to couple out both dipole mode polarizations, the output coupler has four ports. We also report on the results of a study of the benefits which can be achieved by supplementing manifold dam** with local dam** for a limited number of cells at the downstream end of the structure.
△ Less
Submitted 22 August, 2000;
originally announced August 2000.
-
Comparisons Of Equivalent Circuit Predictions With Measurements For Short Stacks Of Rdds1 Discs, And Their Potential Application To Improved Wakefield Prediction
Authors:
R. M. Jones,
T. Higo,
Y. Higashi,
N. Toge,
N. M. Kroll,
R. J. Loewen,
R. H. Miller,
J. W. Wang
Abstract:
In fabricating the first X-Band RDDS (Rounded Damped Detuned Structure) accelerator structure, microwave measurements are made on short groups of discs prior to bonding the discs of the entire structure. The design dispersion curves are compared with the frequency measurements. The theory utilised is based on a circuit model adapted to a short stack of slowly varying non-uniform discs. The model…
▽ More
In fabricating the first X-Band RDDS (Rounded Damped Detuned Structure) accelerator structure, microwave measurements are made on short groups of discs prior to bonding the discs of the entire structure. The design dispersion curves are compared with the frequency measurements. The theory utilised is based on a circuit model adapted to a short stack of slowly varying non-uniform discs. The model reveals the nature of the modes in the structure and may also be used to refit the experimental data to the parameters in a model of the wakefield given earlier [1]. This method allows a more faithful determination of the wakefield that a beam will experience as it traverses the structure. Results obtained on the frequencies are compared to the original design.
[1] R.M.Jones, et al, EPAC96 (also SLAC-PUB-7187)
△ Less
Submitted 20 August, 2000;
originally announced August 2000.
-
An Investigation of Optimised Frequency Distributions for Dam** Wakefields in X-Band Linacs for the NLC
Authors:
R. M. Jones,
N. M. Kroll,
R. H. Miller,
T. O. Raubenheimer,
G. V. Stupakov
Abstract:
In the NLC (Next Linear Collider) small misalignments in each of the individual accelerator structures (or the accelerator cells) will give rise to wakefields which kick the beam from its electrical axis. This wakefield can cause BBU (Beam Break Up) or at the very least it will dilute the emittance of the beam. Several Gaussian detuned structures have been designed and tested [1] at SLAC and in…
▽ More
In the NLC (Next Linear Collider) small misalignments in each of the individual accelerator structures (or the accelerator cells) will give rise to wakefields which kick the beam from its electrical axis. This wakefield can cause BBU (Beam Break Up) or at the very least it will dilute the emittance of the beam. Several Gaussian detuned structures have been designed and tested [1] at SLAC and in this paper we explore new distributions with possibly better dam** properties. The progress of the beam through approximately 5,000 structures is monitored in phase space and results on this are presented.
[1] J.W. Wang et al, TUA03, LINAC2000
△ Less
Submitted 30 August, 2000; v1 submitted 20 August, 2000;
originally announced August 2000.
-
Fabrication and Tolerance Issues and their Influence on Multi-Bunch Bbu and Emittance Dilution in the Construction of X-Band RDDS Linacs for the NLC
Authors:
R. M. Jones,
R. H. Miller,
T. O. Raubenheimer,
G. V. Stupakov
Abstract:
The main linacs of the Next Linear Collider (NLC) will contain several thousand X-band RDDS (Rounded Damped Detuned Structures). The transverse wakefield in the structures is reduced by detuning the modal frequencies such that they destructively interfere and by four dam** manifolds per structure which provide weak dam**. Errors in the fabrication of the individual cells and in the alignment…
▽ More
The main linacs of the Next Linear Collider (NLC) will contain several thousand X-band RDDS (Rounded Damped Detuned Structures). The transverse wakefield in the structures is reduced by detuning the modal frequencies such that they destructively interfere and by four dam** manifolds per structure which provide weak dam**. Errors in the fabrication of the individual cells and in the alignment of the cells will reduce the cancellation of the modes. Here, we calculate the tolerances on random errors in the synchronous frequencies of the cells and the cell-to-cell alignment.
△ Less
Submitted 20 August, 2000;
originally announced August 2000.
-
Meeting Tight Frequency Requirement of Rounded Damped Detuned Structure
Authors:
T. Higo,
Y. Funahashi,
Y. Higashi,
N. Hitomi,
T. Suzuki,
K. Takata,
T. Takatomi,
N. Toge,
Y. Watanabe,
Z. Li,
R. H. Miller,
J. W. Wang
Abstract:
Following successful design and fabrication of damped detuned structures, the R&D for the accelerating structures of the NLC/JLC linear collider project proceeded to studies of Rounded Damped Detuned Structure with curved cross section of the cavity shape for increased shunt impedance. The important features of the structure are the accurately tuned accelerating mode frequency and the distributi…
▽ More
Following successful design and fabrication of damped detuned structures, the R&D for the accelerating structures of the NLC/JLC linear collider project proceeded to studies of Rounded Damped Detuned Structure with curved cross section of the cavity shape for increased shunt impedance. The important features of the structure are the accurately tuned accelerating mode frequency and the distribution of the first dipole modes smooth and close to the design distribution. These requirements were met based on the high-accuracy diamond turning with its capability to realize the periphery tolerance of two microns. The lowest dipole mode frequencies scattered by 0.6 MHz RMS. The error in the accelerating mode frequency averaged over a structure was 0.1 MHz by applying a feed-forward method.
△ Less
Submitted 18 August, 2000;
originally announced August 2000.
