Showing 1–17 of 17 results for author: Milanesio, M

Testbeam results of irradiated SiGe BiCMOS monolithic silicon pixel detector without internal gain layer

Authors: T. Moretti, M. Milanesio, R. Cardella, T. Kugathasan, A. Picardi, I. Semendyaev, M. Elviretti, H. Rücker, K. Nakamura, Y. Takubo, M. Togawa, F. Cadoux, R. Cardarelli, L. Cecconi, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, L. Iodice, R. Kotitsa, C. Magliocca, M. Nessi, A. Pizarro-Medina, J. Sabater Iglesias , et al. (5 additional authors not shown)

Abstract: Samples of the monolithic silicon pixel ASIC prototype produced in 2022 within the framework of the Horizon 2020 MONOLITH ERC Advanced project were irradiated with 70 MeV protons up to a fluence of 1 x 1016 neq/cm2, and then tested using a beam of 120 GeV/c pions. The ASIC contains a matrix of 100 μm pitch hexagonal pixels, readout out by low noise and very fast frontend electronics produced in a… ▽ More Samples of the monolithic silicon pixel ASIC prototype produced in 2022 within the framework of the Horizon 2020 MONOLITH ERC Advanced project were irradiated with 70 MeV protons up to a fluence of 1 x 1016 neq/cm2, and then tested using a beam of 120 GeV/c pions. The ASIC contains a matrix of 100 μm pitch hexagonal pixels, readout out by low noise and very fast frontend electronics produced in a 130 nm SiGe BiCMOS technology process. The dependence on the proton fluence of the efficiency and the time resolution of this prototype was measured with the frontend electronics operated at a power density between 0.13 and 0.9 W/cm2. The testbeam data show that the detection efficiency of 99.96% measured at sensor bias voltage of 200 V before irradiation becomes 96.2% after a fluence of 1 x 1016 neq/cm2. An increase of the sensor bias voltage to 300 V provides an efficiency to 99.7% at that proton fluence. The timing resolution of 20 ps measured before irradiation rises for a proton fluence of 1 x 1016 neq/cm2 to 53 and 45 ps at HV = 200 and 300 V, respectively. △ Less

Submitted 21 June, 2024; v1 submitted 19 April, 2024; originally announced April 2024.

First Measurement of the $ν_e$ and $ν_μ$ Interaction Cross Sections at the LHC with FASER's Emulsion Detector

Authors: FASER Collaboration, Roshan Mammen Abraham, John Anders, Claire Antel, Akitaka Ariga, Tomoko Ariga, Jeremy Atkinson, Florian U. Bernlochner, Tobias Boeckh, Jamie Boyd, Lydia Brenner, Angela Burger, Franck Cadoux, Roberto Cardella, David W. Casper, Charlotte Cavanagh, Xin Chen, Andrea Coccaro, Stephane Debieux, Monica D'Onofrio, Ansh Desai, Sergey Dmitrievsky, Sinead Eley, Yannick Favre, Deion Fellers , et al. (80 additional authors not shown)

Abstract: This paper presents the first results of the study of high-energy electron and muon neutrino charged-current interactions in the FASER$ν$ emulsion/tungsten detector of the FASER experiment at the LHC. A subset of the FASER$ν$ volume, which corresponds to a target mass of 128.6~kg, was exposed to neutrinos from the LHC $pp$ collisions with a centre-of-mass energy of 13.6~TeV and an integrated lumin… ▽ More This paper presents the first results of the study of high-energy electron and muon neutrino charged-current interactions in the FASER$ν$ emulsion/tungsten detector of the FASER experiment at the LHC. A subset of the FASER$ν$ volume, which corresponds to a target mass of 128.6~kg, was exposed to neutrinos from the LHC $pp$ collisions with a centre-of-mass energy of 13.6~TeV and an integrated luminosity of 9.5 fb$^{-1}$. Applying stringent selections requiring electrons with reconstructed energy above 200~GeV, four electron neutrino interaction candidate events are observed with an expected background of $0.025^{+0.015}_{-0.010}$, leading to a statistical significance of 5.2$σ$. This is the first direct observation of electron neutrino interactions at a particle collider. Eight muon neutrino interaction candidate events are also detected, with an expected background of $0.22^{+0.09}_{-0.07}$, leading to a statistical significance of 5.7$σ$. The signal events include neutrinos with energies in the TeV range, the highest-energy electron and muon neutrinos ever detected from an artificial source. The energy-independent part of the interaction cross section per nucleon is measured over an energy range of 560--1740 GeV (520--1760 GeV) for $ν_e$ ($ν_μ$) to be $(1.2_{-0.7}^{+0.8}) \times 10^{-38}~\mathrm{cm}^{2}\,\mathrm{GeV}^{-1}$ ($(0.5\pm0.2) \times 10^{-38}~\mathrm{cm}^{2}\,\mathrm{GeV}^{-1}$), consistent with Standard Model predictions. These are the first measurements of neutrino interaction cross sections in those energy ranges. △ Less

Submitted 19 March, 2024; originally announced March 2024.

Neutrino Rate Predictions for FASER

Authors: FASER Collaboration, Roshan Mammen Abraham, John Anders, Claire Antel, Akitaka Ariga, Tomoko Ariga, Jeremy Atkinson, Florian U. Bernlochner, Tobias Boeckh, Jamie Boyd, Lydia Brenner, Angela Burger, Franck Cadoux, Roberto Cardella, David W. Casper, Charlotte Cavanagh, Xin Chen, Andrea Coccaro, Stephane Débieux, Monica D'Onofrio, Ansh Desai, Sergey Dmitrievsky, Sinead Eley, Yannick Favre, Deion Fellers , et al. (75 additional authors not shown)

Abstract: The Forward Search Experiment (FASER) at CERN's Large Hadron Collider (LHC) has recently directly detected the first collider neutrinos. Neutrinos play an important role in all FASER analyses, either as signal or background, and it is therefore essential to understand the neutrino event rates. In this study, we update previous simulations and present prescriptions for theoretical predictions of ne… ▽ More The Forward Search Experiment (FASER) at CERN's Large Hadron Collider (LHC) has recently directly detected the first collider neutrinos. Neutrinos play an important role in all FASER analyses, either as signal or background, and it is therefore essential to understand the neutrino event rates. In this study, we update previous simulations and present prescriptions for theoretical predictions of neutrino fluxes and cross sections, together with their associated uncertainties. With these results, we discuss the potential for possible measurements that could be carried out in the coming years with the FASER neutrino data to be collected in LHC Run 3 and Run 4. △ Less

Submitted 13 June, 2024; v1 submitted 20 February, 2024; originally announced February 2024.

Comments: 19 pages, 10 figures

Time Resolution of a SiGe BiCMOS Monolithic Silicon Pixel Detector without Internal Gain Layer with a Femtosecond Laser

Authors: M. Milanesio, L. Paolozzi, T. Moretti, A. Latshaw, L. Bonacina, R. Cardella, T. Kugathasan, A. Picardi, M. Elviretti, H. Rücker, R. Cardarelli, L. Cecconi, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, L. Iodice, R. Kotitsa, C. Magliocca, M. Nessi, A. Pizarro-Medina, J. Sabater Iglesias, I. Semendyaev, J. Saidi, M. Vicente Barreto Pinto, S. Zambito , et al. (1 additional authors not shown)

Abstract: The time resolution of the second monolithic silicon pixel prototype produced for the MONOLITH H2020 ERC Advanced project was studied using a femtosecond laser. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Silicon wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully deplete… ▽ More The time resolution of the second monolithic silicon pixel prototype produced for the MONOLITH H2020 ERC Advanced project was studied using a femtosecond laser. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Silicon wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully depleted sensor. At the highest frontend power density tested of 2.7 W/cm2, the time resolution with the femtosecond laser pulses was found to be 45 ps for signals generated by 1200 electrons, and 3 ps in the case of 11k electrons, which corresponds approximately to 0.4 and 3.5 times the most probable value of the charge generated by a minimum-ionizing particle. The results were compared with testbeam data taken with the same prototype to evaluate the time jitter produced by the fluctuations of the charge collection. △ Less

Submitted 11 February, 2024; v1 submitted 2 January, 2024; originally announced January 2024.

Comments: Submitted to JINST

Radiation Tolerance of SiGe BiCMOS Monolithic Silicon Pixel Detectors without Internal Gain Layer

Authors: M. Milanesio, L. Paolozzi, T. Moretti, R. Cardella, T. Kugathasan, F. Martinelli, A. Picardi, I. Semendyaev, S. Zambito, K. Nakamura, Y. Tabuko, M. Togawa, M. Elviretti, H. Rücker, F. Cadoux, R. Cardarelli, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, L. Iodice, R. Kotitsa, C. Magliocca, M. Nessi , et al. (5 additional authors not shown)

Abstract: A monolithic silicon pixel prototype produced for the MONOLITH ERC Advanced project was irradiated with 70 MeV protons up to a fluence of 1 x 10^16 1 MeV n_eq/cm^2. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully depleted se… ▽ More A monolithic silicon pixel prototype produced for the MONOLITH ERC Advanced project was irradiated with 70 MeV protons up to a fluence of 1 x 10^16 1 MeV n_eq/cm^2. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer with a resistivity of 350 Ωcm were used to produce a fully depleted sensor. Laboratory tests conducted with a 90Sr source show that the detector works satisfactorily after irradiation. The signal-to-noise ratio is not seen to change up to fluence of 6 x 10^14 n_eq /cm^2 . The signal time jitter was estimated as the ratio between the voltage noise and the signal slope at threshold. At -35 {^\circ}C, sensor bias voltage of 200 V and frontend power consumption of 0.9 W/cm^2, the time jitter of the most-probable signal amplitude was estimated to be 21 ps for proton fluence up to 6 x 10 n_eq/cm^2 and 57 ps at 1 x 10^16 n_eq/cm^2 . Increasing the sensor bias to 250 V and the analog voltage of the preamplifier from 1.8 to 2.0 V provides a time jitter of 40 ps at 1 x 10^16 n_eq/cm^2. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: Submitted to JINST

First Direct Observation of Collider Neutrinos with FASER at the LHC

Authors: FASER Collaboration, Henso Abreu, John Anders, Claire Antel, Akitaka Ariga, Tomoko Ariga, Jeremy Atkinson, Florian U. Bernlochner, Tobias Blesgen, Tobias Boeckh, Jamie Boyd, Lydia Brenner, Franck Cadoux, David W. Casper, Charlotte Cavanagh, Xin Chen, Andrea Coccaro, Ansh Desai, Sergey Dmitrievsky, Monica D'Onofrio, Yannick Favre, Deion Fellers, Jonathan L. Feng, Carlo Alberto Fenoglio, Didier Ferrere , et al. (63 additional authors not shown)

Abstract: We report the first direct observation of neutrino interactions at a particle collider experiment. Neutrino candidate events are identified in a 13.6 TeV center-of-mass energy $pp$ collision data set of 35.4 fb${}^{-1}$ using the active electronic components of the FASER detector at the Large Hadron Collider. The candidates are required to have a track propagating through the entire length of the… ▽ More We report the first direct observation of neutrino interactions at a particle collider experiment. Neutrino candidate events are identified in a 13.6 TeV center-of-mass energy $pp$ collision data set of 35.4 fb${}^{-1}$ using the active electronic components of the FASER detector at the Large Hadron Collider. The candidates are required to have a track propagating through the entire length of the FASER detector and be consistent with a muon neutrino charged-current interaction. We infer $153^{+12}_{-13}$ neutrino interactions with a significance of 16 standard deviations above the background-only hypothesis. These events are consistent with the characteristics expected from neutrino interactions in terms of secondary particle production and spatial distribution, and they imply the observation of both neutrinos and anti-neutrinos with an incident neutrino energy of significantly above 200 GeV. △ Less

Submitted 21 August, 2023; v1 submitted 24 March, 2023; originally announced March 2023.

Comments: Submitted to PRL on March 24 2023

Report number: CERN-EP-2023-056

Journal ref: Published in: Phys.Rev.Lett. 131 (2023) 3, 031801

20 ps Time Resolution with a Fully-Efficient Monolithic Silicon Pixel Detector without Internal Gain Layer

Authors: S. Zambito, M. Milanesio, T. Moretti, L. Paolozzi, M. Munker, R. Cardella, T. Kugathasan, F. Martinelli, A. Picardi, M. Elviretti, H. Rücker, A. Trusch, F. Cadoux, R. Cardarelli, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, L. Iodice, R. Kotitsa, C. Magliocca, M. Nessi, A. Pizarro-Medina, J. Sabater Iglesias , et al. (3 additional authors not shown)

Abstract: A second monolithic silicon pixel prototype was produced for the MONOLITH project. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by a low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer of 350 Ωcm resistivity were used to produce a fully depleted sensor. Laboratory and testbeam measurements of the analog channels present in the pixel… ▽ More A second monolithic silicon pixel prototype was produced for the MONOLITH project. The ASIC contains a matrix of hexagonal pixels with 100 μm pitch, readout by a low-noise and very fast SiGe HBT frontend electronics. Wafers with 50 μm thick epilayer of 350 Ωcm resistivity were used to produce a fully depleted sensor. Laboratory and testbeam measurements of the analog channels present in the pixel matrix show that the sensor has a 130 V wide bias-voltage operation plateau at which the efficiency is 99.8%. Although this prototype does not include an internal gain layer, the design optimised for timing of the sensor and the front-end electronics provides a time resolutions of 20 ps. △ Less

Submitted 28 January, 2023; originally announced January 2023.

Comments: 11 pages, 11 figures

Testbeam Results of the Picosecond Avalanche Detector Proof-Of-Concept Prototype

Authors: G. Iacobucci, S. Zambito, M. Milanesio, T. Moretti, J. Saidi, L. Paolozzi, M. Munker, R. Cardella, F. Martinelli, A. Picardi, H. Rücker, A. Trusch, P. Valerio, F. Cadoux, R. Cardarelli, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, Y. Gurimskaya, R. Kotitsa, C. Magliocca, M. Nessi, A. Pizarro-Medina , et al. (2 additional authors not shown)

Abstract: The proof-of-concept prototype of the Picosecond Avalanche Detector, a multi-PN junction monolithic silicon detector with continuous gain layer deep in the sensor depleted region, was tested with a beam of 180 GeV pions at the CERN SPS. The prototype features low noise and fast SiGe BiCMOS frontend electronics and hexagonal pixels with 100 μm pitch. At a sensor bias voltage of 125 V, the detector… ▽ More The proof-of-concept prototype of the Picosecond Avalanche Detector, a multi-PN junction monolithic silicon detector with continuous gain layer deep in the sensor depleted region, was tested with a beam of 180 GeV pions at the CERN SPS. The prototype features low noise and fast SiGe BiCMOS frontend electronics and hexagonal pixels with 100 μm pitch. At a sensor bias voltage of 125 V, the detector provides full efficiency and average time resolution of 30, 25 and 17 ps in the overall pixel area for a power consumption of 0.4, 0.9 and 2.7 W/cm^2, respectively. In this first prototype the time resolution depends significantly on the distance from the center of the pixel, varying at the highest power consumption measured between 13 ps at the center of the pixel and 25 ps in the inter-pixel region. △ Less

Submitted 23 August, 2022; originally announced August 2022.

The FASER Detector

Authors: FASER Collaboration, Henso Abreu, Elham Amin Mansour, Claire Antel, Akitaka Ariga, Tomoko Ariga, Florian Bernlochner, Tobias Boeckh, Jamie Boyd, Lydia Brenner, Franck Cadoux, David W. Casper, Charlotte Cavanagh, Xin Chen, Andrea Coccaro, Olivier Crespo-Lopez, Stephane Debieux, Monica D'Onofrio, Liam Dougherty, Candan Dozen, Abdallah Ezzat, Yannick Favre, Deion Fellers, Jonathan L. Feng, Didier Ferrere , et al. (72 additional authors not shown)

Abstract: FASER, the ForwArd Search ExpeRiment, is an experiment dedicated to searching for light, extremely weakly-interacting particles at CERN's Large Hadron Collider (LHC). Such particles may be produced in the very forward direction of the LHC's high-energy collisions and then decay to visible particles inside the FASER detector, which is placed 480 m downstream of the ATLAS interaction point, aligned… ▽ More FASER, the ForwArd Search ExpeRiment, is an experiment dedicated to searching for light, extremely weakly-interacting particles at CERN's Large Hadron Collider (LHC). Such particles may be produced in the very forward direction of the LHC's high-energy collisions and then decay to visible particles inside the FASER detector, which is placed 480 m downstream of the ATLAS interaction point, aligned with the beam collisions axis. FASER also includes a sub-detector, FASER$ν$, designed to detect neutrinos produced in the LHC collisions and to study their properties. In this paper, each component of the FASER detector is described in detail, as well as the installation of the experiment system and its commissioning using cosmic-rays collected in September 2021 and during the LHC pilot beam test carried out in October 2021. FASER will start taking LHC collision data in 2022, and will run throughout LHC Run 3. △ Less

Submitted 23 July, 2022; originally announced July 2022.

Comments: 92 pages, 72 Figures

Report number: CERN-FASER-2022-001

Journal ref: JINST 19 (2024) P05066

Picosecond Avalanche Detector -- working principle and gain measurement with a proof-of-concept prototype

Authors: L. Paolozzi, M. Munker, R. Cardella, M. Milanesio, Y. Gurimskaya, F. Martinelli, A. Picardi, H. Rücker, A. Trusch, P. Valerio, F. Cadoux, R. Cardarelli, S. Débieux, Y. Favre, C. A. Fenoglio, D. Ferrere, S. Gonzalez-Sevilla, R. Kotitsa, C. Magliocca, T. Moretti, M. Nessi, A. Pizarro Medina, J. Sabater Iglesias, J. Saidi, M. Vicente Barreto Pinto , et al. (2 additional authors not shown)

Abstract: The Picosecond Avalanche Detector is a multi-junction silicon pixel detector based on a $\mathrm{(NP)_{drift}(NP)_{gain}}$ structure, devised to enable charged-particle tracking with high spatial resolution and picosecond time-stamp capability. It uses a continuous junction deep inside the sensor volume to amplify the primary charge produced by ionizing radiation in a thin absorption layer. The si… ▽ More The Picosecond Avalanche Detector is a multi-junction silicon pixel detector based on a $\mathrm{(NP)_{drift}(NP)_{gain}}$ structure, devised to enable charged-particle tracking with high spatial resolution and picosecond time-stamp capability. It uses a continuous junction deep inside the sensor volume to amplify the primary charge produced by ionizing radiation in a thin absorption layer. The signal is then induced by the secondary charges moving inside a thicker drift region. A proof-of-concept monolithic prototype, consisting of a matrix of hexagonal pixels with 100 $μ$m pitch, has been produced using the 130 nm SiGe BiCMOS process by IHP microelectronics. Measurements on probe station and with a $^{55}$Fe X-ray source show that the prototype is functional and displays avalanche gain up to a maximum electron gain of 23. A study of the avalanche characteristics, corroborated by TCAD simulations, indicates that space-charge effects due to the large primary charge produced by the conversion of X-rays from the $^{55}$Fe source limits the effective gain. △ Less

Submitted 25 September, 2022; v1 submitted 16 June, 2022; originally announced June 2022.

Efficiency and time resolution of monolithic silicon pixel detectors in SiGe BiCMOS technology

Authors: G. Iacobucci, L. Paolozzi, P. Valerio, T. Moretti, F. Cadoux, R. Cardarelli, R. Cardella, S. Débieux, Y. Favre, D. Ferrere, S. Gonzalez-Sevilla, Y. Gurimskaya, R. Kotitsa, C. Magliocca, F. Martinelli, M. Milanesio, M. Münker, M. Nessi, A. Picardi, J. Saidi, H. Rücker, M. Vicente Barreto Pinto, S. Zambito

Abstract: A monolithic silicon pixel detector prototype has been produced in the SiGe BiCMOS SG13G2 130 nm node technology by IHP. The ASIC contains a matrix of hexagonal pixels with pitch of approximately 100 $μ$m. Three analog pixels were calibrated in laboratory with radioactive sources and tested in a 180 GeV/c pion beamline at the CERN SPS. A detection efficiency of $\left(99.9^{+0.1}_{-0.2}\right)$% w… ▽ More A monolithic silicon pixel detector prototype has been produced in the SiGe BiCMOS SG13G2 130 nm node technology by IHP. The ASIC contains a matrix of hexagonal pixels with pitch of approximately 100 $μ$m. Three analog pixels were calibrated in laboratory with radioactive sources and tested in a 180 GeV/c pion beamline at the CERN SPS. A detection efficiency of $\left(99.9^{+0.1}_{-0.2}\right)$% was measured together with a time resolution of $(36.4 \pm 0.8)$ps at the highest preamplifier bias current working point of 150 $μ$A and at a sensor bias voltage of 160 V. The ASIC was also characterized at lower bias voltage and preamplifier current. △ Less

Submitted 21 January, 2022; v1 submitted 16 December, 2021; originally announced December 2021.

The tracking detector of the FASER experiment

Authors: FASER Collaboration, Henso Abreu, Claire Antel, Akitaka Ariga, Tomoko Ariga, Florian Bernlochner, Tobias Boeckh, Jamie Boyd, Lydia Brenner, Franck Cadoux, David W. Casper, Charlotte Cavanagh, Xin Chen, Andrea Coccaro, Olivier Crespo-Lopez, Sergey Dmitrievsky, Monica D'Onofrio, Candan Dozen, Abdallah Ezzat, Yannick Favre, Deion Fellers, Jonathan L. Feng, Didier Ferrere, Stephen Gibson, Sergio Gonzalez-Sevilla , et al. (55 additional authors not shown)

Abstract: FASER is a new experiment designed to search for new light weakly-interacting long-lived particles (LLPs) and study high-energy neutrino interactions in the very forward region of the LHC collisions at CERN. The experimental apparatus is situated 480 m downstream of the ATLAS interaction-point aligned with the beam collision axis. The FASER detector includes four identical tracker stations constru… ▽ More FASER is a new experiment designed to search for new light weakly-interacting long-lived particles (LLPs) and study high-energy neutrino interactions in the very forward region of the LHC collisions at CERN. The experimental apparatus is situated 480 m downstream of the ATLAS interaction-point aligned with the beam collision axis. The FASER detector includes four identical tracker stations constructed from silicon microstrip detectors. Three of the tracker stations form a tracking spectrometer, and enable FASER to detect the decay products of LLPs decaying inside the apparatus, whereas the fourth station is used for the neutrino analysis. The spectrometer has been installed in the LHC complex since March 2021, while the fourth station is not yet installed. FASER will start physics data taking when the LHC resumes operation in early 2022. This paper describes the design, construction and testing of the tracking spectrometer, including the associated components such as the mechanics, readout electronics, power supplies and cooling system. △ Less

Submitted 31 May, 2022; v1 submitted 2 December, 2021; originally announced December 2021.

Journal ref: Nucl. Instrum. Methods Phys. Res., A 1034 (2022) 166825

The trigger and data acquisition system of the FASER experiment

Authors: FASER Collaboration, Henso Abreu, Elham Amin Mansour, Claire Antel, Akitaka Ariga, Tomoko Ariga, Florian Bernlochner, Tobias Boeckh, Jamie Boyd, Lydia Brenner, Franck Cadoux, David Casper, Charlotte Cavanagh, Xin Chen, Andrea Coccaro, Stephane Debieux, Sergey Dmitrievsky, Monica D'Onofrio, Candan Dozen, Yannick Favre, Deion Fellers, Jonathan L. Feng, Didier Ferrere, Enrico Gamberini, Edward Karl Galantay , et al. (59 additional authors not shown)

Abstract: The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS detector acceptance. These rare particles can decay in the FASER detector together with about 500-1000 Hz of other particles originating from the ATLAS interaction… ▽ More The FASER experiment is a new small and inexpensive experiment that is placed 480 meters downstream of the ATLAS experiment at the CERN LHC. FASER is designed to capture decays of new long-lived particles, produced outside of the ATLAS detector acceptance. These rare particles can decay in the FASER detector together with about 500-1000 Hz of other particles originating from the ATLAS interaction point. A very high efficiency trigger and data acquisition system is required to ensure that the physics events of interest will be recorded. This paper describes the trigger and data acquisition system of the FASER experiment and presents performance results of the system acquired during initial commissioning. △ Less

Submitted 10 January, 2022; v1 submitted 28 October, 2021; originally announced October 2021.

Journal ref: 2021_JINST_16_P12028

Stereocomplexation of Poly(Lactic Acid)s on Graphite Nanoplatelets: from Functionalized Nanoparticles to Self-Assembled Nanostructures

Authors: Matteo Eleuteri, Mar Bernal, Marco Milanesio, Orietta Monticelli, Alberto Fina

Abstract: The control of nanostructuration of graphene and graphene related materials (GRM) into self-assembled structures is strictly related to the nanoflakes chemical functionalization, which may be obtained via covalent grafting of non-covalent interactions, mostly exploiting π-stacking. As the non-covalent functionalization does not affect the sp2 carbon structure, this is often exploited to preserve t… ▽ More The control of nanostructuration of graphene and graphene related materials (GRM) into self-assembled structures is strictly related to the nanoflakes chemical functionalization, which may be obtained via covalent grafting of non-covalent interactions, mostly exploiting π-stacking. As the non-covalent functionalization does not affect the sp2 carbon structure, this is often exploited to preserve the thermal and electrical properties of the GRM and it is a well-known route to tailor the interaction between GRM and organic media. In this work, non-covalent functionalization of graphite nanoplatelets (GnP) was carried out with ad-hoc synthesized pyrene-terminated oligomers of polylactic acid (PLA), aiming at the modification of GnP nanopapers thermal properties. PLA was selected based on the possibility to self-assemble in crystalline domains via stereocomplexation of complementary poly(L-lactide) (PLLA) and poly(D-lactide) (PDLA) enantiomers. Pyrene-initiated PLLA and PDLA were indeed demonstrated to anchor to the GnP surface. Calorimetric and X-ray diffraction investigations highlighted the enantiomeric PLAs adsorbed on the surface of the nanoplatelets self-organize to produce highly crystalline stereocomplex domains. Most importantly, PLLA/PDLA stereocomplexation delivered a significantly higher efficiency in nanopapers heat transfer, in particular through the thickness of the nanopaper. This is explained by a thermal bridging effect of crystalline domains between overlapped GnP, promoting heat transfer across the nanoparticles contacts. This work demonstrates the possibility to enhance the physical properties of contacts within a percolating network of GRM via the self-assembly of macromolecules and opens a new way for the engineering of GRM-based nanostructures. △ Less

Submitted 30 October, 2019; originally announced October 2019.

Journal ref: Front. Chem. 7:176 (2019)

Experimental Performance Evaluation of Cloud-Based Analytics-as-a-Service

Authors: Francesco Pace, Marco Milanesio, Daniele Venzano, Damiano Carra, Pietro Michiardi

Abstract: An increasing number of Analytics-as-a-Service solutions has recently seen the light, in the landscape of cloud-based services. These services allow flexible composition of compute and storage components, that create powerful data ingestion and processing pipelines. This work is a first attempt at an experimental evaluation of analytic application performance executed using a wide range of storage… ▽ More An increasing number of Analytics-as-a-Service solutions has recently seen the light, in the landscape of cloud-based services. These services allow flexible composition of compute and storage components, that create powerful data ingestion and processing pipelines. This work is a first attempt at an experimental evaluation of analytic application performance executed using a wide range of storage service configurations. We present an intuitive notion of data locality, that we use as a proxy to rank different service compositions in terms of expected performance. Through an empirical analysis, we dissect the performance achieved by analytic workloads and unveil problems due to the impedance mismatch that arise in some configurations. Our work paves the way to a better understanding of modern cloud-based analytic services and their performance, both for its end-users and their providers. △ Less

Submitted 15 March, 2017; v1 submitted 25 February, 2016; originally announced February 2016.

Comments: Longer version of the paper in Submission at IEEE CLOUD'16

Tagging with DHARMA, a DHT-based Approach for Resource Map** through Approximation

Authors: Luca Maria Aiello, Marco Milanesio, Giancarlo Ruffo, Rossano Schifanella

Abstract: We introduce collaborative tagging and faceted search on structured P2P systems. Since a trivial and brute force map** of an entire folksonomy over a DHT-based system may reduce scalability, we propose an approximated graph maintenance approach. Evaluations on real data coming from Last.fm prove that such strategies reduce vocabulary noise (i.e., representation's overfitting phenomena) and hotsp… ▽ More We introduce collaborative tagging and faceted search on structured P2P systems. Since a trivial and brute force map** of an entire folksonomy over a DHT-based system may reduce scalability, we propose an approximated graph maintenance approach. Evaluations on real data coming from Last.fm prove that such strategies reduce vocabulary noise (i.e., representation's overfitting phenomena) and hotspots issues. △ Less

Submitted 19 January, 2011; originally announced January 2011.

Comments: 8 pages, 8 figures

Journal ref: HOTP2P '10 : 7th International Workshop on Hot Topics in Peer-to-Peer Systems, Atlanta, Georgia, April 19-23, 2010

Collaborative Filtering without Explicit Feedbacks for Digital Recorders

Authors: Alessandro Basso, Marco Milanesio, André Panisson, Giancarlo Ruffo

Abstract: Recommendation is usually reduced to a prediction problem over the function $r(u_a, e_i)$ that returns the expected rating of element $e_i$ for user $u_a$. In the IPTV domain, we deal with an environment where the definitions of all the parameters involved in this function (i.e., user profiles, feedback ratings and elements) are controversial. To our knowledge, this paper represents the first atte… ▽ More Recommendation is usually reduced to a prediction problem over the function $r(u_a, e_i)$ that returns the expected rating of element $e_i$ for user $u_a$. In the IPTV domain, we deal with an environment where the definitions of all the parameters involved in this function (i.e., user profiles, feedback ratings and elements) are controversial. To our knowledge, this paper represents the first attempt to run collaborative filtering algorithms without inner assumptions: we start our analysis from an unstructured set of recordings, before performing a data pre-processing phase in order to extract useful information. Hence, we experiment with a real Digital Video Recorder system where EPG have not been provided to the user for selecting event timings and where explicit feedbacks were not collected. △ Less

Submitted 17 January, 2011; originally announced January 2011.