-
Sub-100-fs formation of dark excitons in monolayer WS$_2$
Authors:
Pavel V. Kolesnichenko,
Lukas Wittenbecher,
Qianhui Zhang,
Run Yan Teh,
Chandni Babu,
Michael S. Fuhrer,
Anders Mikkelsen,
Donatas Zigmantas
Abstract:
Two-dimensional semiconductors based on transition metal dichalcogenides are promising for electronics and optoelectronics applications owing to their properties governed by strongly-bound bright and dark excitons. Momentum-forbidden dark excitons have recently received attention as better alternatives to bright excitons for long-range transport. However, accessing the dynamics of dark excitons is…
▽ More
Two-dimensional semiconductors based on transition metal dichalcogenides are promising for electronics and optoelectronics applications owing to their properties governed by strongly-bound bright and dark excitons. Momentum-forbidden dark excitons have recently received attention as better alternatives to bright excitons for long-range transport. However, accessing the dynamics of dark excitons is challenging experimentally. The most direct, but very complicated, experiment is transient angle-resolved photoemission electron spectroscopy: sub-100-fs formation of K-$Λ$-excitons in monolayer WS$_2$ has been identified previously taking advantage of momentum resolution of detected signals [1]. Here, we use a simpler setting of transient photoemission electron microscopy (with spatial resolution of 75 nm), which is inherently sensitive to dark K-$Λ$ excitons in monolayers of transition metal dichalcogenide and has exceptionally high temporal resolution of 13 fs. We are able to directly observe intervalley scattering (dark-exciton formation) in monolayer WS$_2$ with scattering rates in the range of 14-50 fs followed by picosecond-scale dynamics mediated by defects.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
In situ Imaging of Precipitate Formation in Additively Manufactured Al-Alloys by Scanning X-ray Fluorescence
Authors:
Isac Lazar,
Bharat Mehta,
Vendulka Bertschová,
Sri Bala Aditya Malladi,
Zhe Ren,
Srashtasrita Das,
Johannes Hagemann,
Gerald Falkenberg,
Karin Frisk,
Anders Mikkelsen,
Lars Nyborg
Abstract:
A new family of high-strength Al-alloys has recently been developed, tailored for the powder bed fusion-laser beam process. In these alloys, Mn, Cr and Zr are incorporated in solid solution at amounts up to three times that of equilibrium in the as-printed state. Mn and Cr-enriched precipitates that form during printing and heat treatment influence the material's mechanical properties. In this stu…
▽ More
A new family of high-strength Al-alloys has recently been developed, tailored for the powder bed fusion-laser beam process. In these alloys, Mn, Cr and Zr are incorporated in solid solution at amounts up to three times that of equilibrium in the as-printed state. Mn and Cr-enriched precipitates that form during printing and heat treatment influence the material's mechanical properties. In this study, direct imaging of these precipitates was accomplished through the utilisation of in situ synchrotron-based scanning X-ray fluorescence. During heat treatment, a selective accumulation of Cr and Mn in two distinct types of precipitates at grain boundaries was observed. Additionally, the microstructure at the melt-pool boundary, containing precipitates found in the as-printed state, remains thermally stable during the heat treatment. The study demonstrates the significant value of employing high-sensitivity in-situ X-ray fluorescence microscopy in exploring the kinetics of sub-micrometre scale precipitation.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Time-resolved photoemission electron microscopy on a ZnO surface using an extreme ultraviolet attosecond pulse pair
Authors:
Jan Vogelsang,
Lukas Wittenbecher,
Sara Mikaelsson,
Chen Guo,
Ivan Sytcevich,
Anne-Lise Viotti,
Cord L. Arnold,
Anne L'Huillier,
Anders Mikkelsen
Abstract:
Electrons photoemitted by extreme ultraviolet attosecond pulses derive spatially from the first few atomic surface layers and energetically from the valence band and highest atomic orbitals. As a result, it is possible to probe the emission dynamics from a narrow two-dimensional region in the presence of optical fields as well as obtain elemental specific information. However, combining this with…
▽ More
Electrons photoemitted by extreme ultraviolet attosecond pulses derive spatially from the first few atomic surface layers and energetically from the valence band and highest atomic orbitals. As a result, it is possible to probe the emission dynamics from a narrow two-dimensional region in the presence of optical fields as well as obtain elemental specific information. However, combining this with spatially-resolved imaging is a long-standing challenge because of the large inherent spectral width of attosecond pulses as well as the difficulty of making them at high repetition rates. Here we demonstrate an attosecond interferometry experiment on a zinc oxide (ZnO) surface using spatially and energetically resolved photoelectrons. We combine photoemission electron microscopy with near-infrared pump - extreme ultraviolet probe laser spectroscopy and resolve the instantaneous phase of an infrared field with high spatial resolution. Our results show how the core level states with low binding energy of ZnO are well suited to perform spatially resolved attosecond interferometry experiments. We observe a distinct phase shift of the attosecond beat signal across the laser focus which we attribute to wavefront differences between the pump and the probe fields at the surface. Our work demonstrates a clear pathway for attosecond interferometry with high spatial resolution at atomic scale surface regions opening up for a detailed understanding of nanometric light-matter interaction.
△ Less
Submitted 14 October, 2023;
originally announced October 2023.
-
Artificial Nanophotonic Neuron with Internal Memory for Biologically Inspired and Reservoir Network Computing
Authors:
David Winge,
Magnus Borgström,
Erik Lind,
Anders Mikkelsen
Abstract:
Neurons with internal memory have been proposed for biological and bio-inspired neural networks, adding interesting functionality. We propose and model a nanoscale optoelectronic neural node with charge-based time-limited memory and signal evaluation. Connectivity is achieved by weighted light signals emitted and received by the nodes. The device is based on well-developed III-V nanowire technolog…
▽ More
Neurons with internal memory have been proposed for biological and bio-inspired neural networks, adding interesting functionality. We propose and model a nanoscale optoelectronic neural node with charge-based time-limited memory and signal evaluation. Connectivity is achieved by weighted light signals emitted and received by the nodes. The device is based on well-developed III-V nanowire technology, which has shown high photo-conversion efficiency, low energy consumption and sub-wavelength light concentration. We create a flexible computational model of the complete artificial neural node device using experimental values for wire performance. The model can simulate combinations of nodes with different hardware derived properties and widely variable light interconnects. Using this model, we simulate the hardware implementation for two types of neural networks. First, we show that intentional variations in the memory decay time of the nodes can significantly improve the performance of a reservoir network. Second, we simulate the nanowire node implementing an anatomically constrained functioning model of the central complex network of the insect brain and find that it functions well even including variations in the node performance as would be found in realistic device fabrication. Our work demonstrates the feasibility of a concrete, variable, nanophotonic neural node with a memory. The use of variable memory time constants to open new opportunities for network performance is a general hardware derived feature and should be applicable for a broad range of implementations.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Room temperature structure and energetics of water-hydroxyl layers on Pt(111)
Authors:
August E. G. Mikkelsen,
Henrik H. Kristoffersen,
Jakob Schiøtz,
Tejs Vegge,
Heine A. Hansen,
Karsten W. Jacobsen
Abstract:
The interactions between water and hydroxyl species on Pt(111) surfaces have been intensely investigated due to their importance to fuel cell electrocatalysis. Here we present a room temperature molecular dynamics study of their structure and energetics using an ensemble of neural network potentials, which allow us to obtain unprecedented statistical sampling. We first study the energetics of hydr…
▽ More
The interactions between water and hydroxyl species on Pt(111) surfaces have been intensely investigated due to their importance to fuel cell electrocatalysis. Here we present a room temperature molecular dynamics study of their structure and energetics using an ensemble of neural network potentials, which allow us to obtain unprecedented statistical sampling. We first study the energetics of hydroxyl formation, where we find a near-linear adsorption energy profile, which exhibits a soft and gradual increase in the differential adsorption energy at high hydroxyl coverages. This is strikingly different from the predictions of the conventional bilayer model, which displays a kink at 1/3ML OH coverage indicating a sizeable jump in differential adsorption energy, but within the statistical uncertainty of previously reported ab initio molecular dynamics studies. We then analyze the structure of the interface, where we provide evidence for the water-OH/Pt(111) interface being hydrophobic at high hydroxyl coverages. We furthermore explain the observed adsorption energetics by analyzing the hydrogen bonding in the water-hydroxyl adlayers, where we argue that the increase in differential adsorption energy at high OH coverage can be explained by a reduction in the number of hydrogen bonds from the adsorbed water molecules to the hydroxyls.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Influence of Contacts and Applied Voltage on a Structure of a Single GaN Nanowire
Authors:
Sergey Lazarev,
Luca Gelisio,
Young Yong Kim,
Bi Zhaoxia,
Ali Nowzari,
Ivan A. Zaluzhnyy,
Ruslan Khubbutdinov,
Dmitry Dzhigaev,
Arno Jeromin,
Thomas Keller,
Michael Sprung,
Anders Mikkelsen,
Lars Samuelson,
Ivan A. Vartanyants
Abstract:
Semiconductor nanowires (NWs) have a broad range of applications for nano- and optoelectronics. The strain field of gallium nitride (GaN) NWs could be significantly changed when contacts are applied to them to form a final device, especially considering the piezoelectric properties of GaN. Investigation of influence of the metallic contacts on the structure of the NWs is of high importance for the…
▽ More
Semiconductor nanowires (NWs) have a broad range of applications for nano- and optoelectronics. The strain field of gallium nitride (GaN) NWs could be significantly changed when contacts are applied to them to form a final device, especially considering the piezoelectric properties of GaN. Investigation of influence of the metallic contacts on the structure of the NWs is of high importance for their applications in real devices. We have studied a series of different type of contacts and influence of the applied voltage bias on the contacted GaN NWs with the length of about 3 to 4 micrometers and with two different diameters of 200 nm and 350 nm. It was demonstrated that the NWs with the diameter of 200 nm are bend already by the interaction with the substrate. For all GaN NWs, significant structural changes were revealed after the contacts deposition. The results of our research may contribute to the future optoelectronic applications of the GaN nanowires.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Structural and chemical mechanisms governing stability of inorganic Janus nanotubes
Authors:
Felix Tim Bölle,
August E. G. Mikkelsen,
Kristian S. Thygesen,
Tejs Vegge,
Ivano E. Castelli
Abstract:
One-dimensional inorganic nanotubes hold promise for technological applications due to their distinct physical/chemical properties, but so far advancements have been hampered by difficulties in producing single-wall nanotubes with a well-defined radius. In this work we investigate, based on Density Functional Theory (DFT), the formation mechanism of 135 different inorganic nanotubes formed by the…
▽ More
One-dimensional inorganic nanotubes hold promise for technological applications due to their distinct physical/chemical properties, but so far advancements have been hampered by difficulties in producing single-wall nanotubes with a well-defined radius. In this work we investigate, based on Density Functional Theory (DFT), the formation mechanism of 135 different inorganic nanotubes formed by the intrinsic self-rolling driving force found in asymmetric 2D Janus sheets. We show that for isovalent Janus sheets, the lattice mismatch between inner and outer atomic layers is the driving force behind the nanotube formation, while in the non-isovalent case it is governed by the difference in chemical bond strength of the inner and outer layer leading to steric effects. From our pool of candidate structures we have identified more than 100 tubes with a preferred radius below 35 Å, which we hypothesize can display unique properties compared to their parent 2D monolayers. Simple descriptors have been identified to accelerate the discovery of small-radius tubes and a Bayesian regression approach has been implemented to assess the uncertainty in our predictions on the radius.
△ Less
Submitted 30 November, 2020;
originally announced November 2020.
-
Multi-wavelength coherent diffractive imaging
Authors:
Erik Malm,
Edwin Fohtung,
Anders Mikkelsen
Abstract:
Coherent diffractive imaging is a technique that recovers the sample image by numerically inverting its diffraction pattern. We propose a generalization of this method for the inversion of multi-wavelength data. Using this approach, we show that separate reconstructions for each wavelength can be recovered from a single polychromatic diffraction pattern. Limitations on the number of wavelengths is…
▽ More
Coherent diffractive imaging is a technique that recovers the sample image by numerically inverting its diffraction pattern. We propose a generalization of this method for the inversion of multi-wavelength data. Using this approach, we show that separate reconstructions for each wavelength can be recovered from a single polychromatic diffraction pattern. Limitations on the number of wavelengths is provided by adapting the constraint ratio to the polychromatic situation. The method's performance is demonstrated as a function of the source spectrum, the degree of complexity within the exit wave and the sample geometry using several numerical simulations. Lastly, an example shows the ability to recover element-specific information using two harmonics selected from a high-order harmonic generation source.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
-
Implementing an insect brain computational circuit using III-V nanowire components in a single shared waveguide optical network
Authors:
David O. Winge,
Steven Limpert,
Heiner Linke,
Magnus T. Borgström,
Barbara Webb,
Stanley Heinze,
Anders Mikkelsen
Abstract:
Recent developments in photonics include efficient nanoscale optoelectronic components and novel methods for sub-wavelength light manipulation. Here, we explore the potential offered by such devices as a substrate for neuromorphic computing. We propose an artificial neural network in which the weighted connectivity between nodes is achieved by emitting and receiving overlap** light signals insid…
▽ More
Recent developments in photonics include efficient nanoscale optoelectronic components and novel methods for sub-wavelength light manipulation. Here, we explore the potential offered by such devices as a substrate for neuromorphic computing. We propose an artificial neural network in which the weighted connectivity between nodes is achieved by emitting and receiving overlap** light signals inside a shared quasi 2D waveguide. This decreases the circuit footprint by at least an order of magnitude compared to existing optical solutions. The reception, evaluation and emission of the optical signals are performed by a neuron-like node constructed from known, highly efficient III-V nanowire optoelectronics. This minimizes power consumption of the network. To demonstrate the concept, we build a computational model based on an anatomically correct, functioning model of the central-complex navigation circuit of the insect brain. We simulate in detail the optical and electronic parts required to reproduce the connectivity of the central part of this network, using experimentally derived parameters. The results are used as input in the full model and we demonstrate that the functionality is preserved. Our approach points to a general method for drastically reducing the footprint and improving power efficiency of optoelectronic neural networks, leveraging the superior speed and energy efficiency of light as a carrier of information.
△ Less
Submitted 2 March, 2020;
originally announced March 2020.
-
Few-cycle lightwave-driven currents in a semiconductor at high repetition rate
Authors:
Fabian Langer,
Yen-Po Liu,
Zhe Ren,
Vidar Flodgren,
Chen Guo,
Jan Vogelsang,
Sara Mikaelsson,
Ivan Sytcevich,
Jan Ahrens,
Anne L'Huillier,
Cord L. Arnold,
Anders Mikkelsen
Abstract:
When an intense, few-cycle light pulse im**es on a dielectric or semiconductor material, the electric field will interact nonlinearly with the solid, driving a coherent current. An asymmetry of the ultrashort, carrier-envelope-phase-stable waveform results in a net transfer of charge, which can be measured by macroscopic electric contact leads. This effect has been pioneered with extremely short…
▽ More
When an intense, few-cycle light pulse im**es on a dielectric or semiconductor material, the electric field will interact nonlinearly with the solid, driving a coherent current. An asymmetry of the ultrashort, carrier-envelope-phase-stable waveform results in a net transfer of charge, which can be measured by macroscopic electric contact leads. This effect has been pioneered with extremely short, single-cycle laser pulses at low repetition rate, thus limiting the applicability of its potential for ultrafast electronics. We investigate lightwave-driven currents in gallium nitride using few-cycle laser pulses of nearly twice the duration and at a repetition rate two orders of magnitude higher than in previous work. We successfully simulate our experimental data with a theoretical model based on interfering multiphoton transitions, using the exact laser pulse shape retrieved from dispersion-scan measurements. Substantially increasing the repetition rate and relaxing the constraint on the pulse duration marks an important step forward towards applications of lightwave-driven electronics.
△ Less
Submitted 26 January, 2020;
originally announced January 2020.
-
Spatial Control of Multiphoton Electron Excitations in InAs Nanowires by Varying Crystal Phase and Light Polarization
Authors:
Erik Mårsell,
Emil Boström,
Anne Harth,
Arthur Losquin,
Chen Guo,
Yu-Chen Cheng,
Eleonora Lorek,
Sebastian Lehmann,
Gustav Nylund,
Martin Stankovski,
Cord L. Arnold,
Miguel Miranda,
Kimberly A. Dick,
Johan Mauritsson,
Claudio Verdozzi,
Anne L'Huillier,
Anders Mikkelsen
Abstract:
We demonstrate the control of multiphoton electron excitations in InAs nanowires (NWs) by altering the crystal structure and the light polarization. Using few-cycle, near-infrared laser pulses from an optical parametric chirped-pulse amplification system, we induce multiphoton electron excitations in InAs nanowires with controlled wurtzite (WZ) and zincblende (ZB) segments. With a photoemission el…
▽ More
We demonstrate the control of multiphoton electron excitations in InAs nanowires (NWs) by altering the crystal structure and the light polarization. Using few-cycle, near-infrared laser pulses from an optical parametric chirped-pulse amplification system, we induce multiphoton electron excitations in InAs nanowires with controlled wurtzite (WZ) and zincblende (ZB) segments. With a photoemission electron microscope, we show that we can selectively induce multiphoton electron emission from WZ or ZB segments of the same wire by varying the light polarization. Develo** \textit{ab-initio GW} calculations of 1st to 3rd order multiphoton excitations and using finite-difference time-domain simulations, we explain the experimental findings: While the electric-field enhancement due to the semiconductor/vacuum interface has a similar effect for all NW segments, the 2nd and 3rd order multiphoton transitions in the band structure of WZ InAs are highly anisotropic, in contrast to ZB InAs. As the crystal phase of NWs can be precisely and reliably tailored, our findings opens up for new semiconductor optoelectronics with controllable nanoscale emission of electrons through vacuum or dielectric barriers.
△ Less
Submitted 29 January, 2019;
originally announced January 2019.
-
Phase Control of Attosecond Pulses in a Train
Authors:
Chen Guo,
Anne Harth,
Stefanos Carlström,
Yu-Chen Cheng,
Sara Mikaelsson,
Erik Mårsell,
Christoph Heyl,
Miguel Miranda,
Mathieu Gisselbrecht,
Mette B. Gaarde,
Kenneth J. Schafer,
Anders Mikkelsen,
Johan Mauritsson,
Cord L. Arnold,
Anne L'Huillier
Abstract:
Ultrafast processes in matter can be captured and even controlled by using sequences of few-cycle optical pulses, which need to be well characterized, both in amplitude and phase. The same degree of control has not yet been achieved for few-cycle extreme ultraviolet pulses generated by high-order harmonic generation in gases, with duration in the attosecond range. Here, we show that by varying the…
▽ More
Ultrafast processes in matter can be captured and even controlled by using sequences of few-cycle optical pulses, which need to be well characterized, both in amplitude and phase. The same degree of control has not yet been achieved for few-cycle extreme ultraviolet pulses generated by high-order harmonic generation in gases, with duration in the attosecond range. Here, we show that by varying the spectral phase and carrier-envelope phase (CEP) of a high-repetition rate laser, using dispersion in glass, we achieve a high degree of control of the relative phase and CEP between consecutive attosecond pulses. The experimental results are supported by a detailed theoretical analysis based upon the semiclassical three-step model for high-order harmonic generation.
△ Less
Submitted 14 January, 2019;
originally announced January 2019.
-
Zeno-clocking the Auger decay
Authors:
Emil Viñas Boström,
Mathieu Gisselbrecht,
Tomas Brage,
Carl-Olof Almbladh,
Anders Mikkelsen,
Claudio Verdozzi
Abstract:
A tenet of time-resolved spectroscopy is -faster laser pulses for shorter timescales- . Here we suggest turning this paradigm around, and slow down the system dynamics via repeated measurements, to do spectroscopy on longer timescales. This is the principle of the quantum Zeno effect. We exemplify our approach with the Auger process, and find that repeated measurements increase the core-hole lifet…
▽ More
A tenet of time-resolved spectroscopy is -faster laser pulses for shorter timescales- . Here we suggest turning this paradigm around, and slow down the system dynamics via repeated measurements, to do spectroscopy on longer timescales. This is the principle of the quantum Zeno effect. We exemplify our approach with the Auger process, and find that repeated measurements increase the core-hole lifetime, redistribute the kinetic energy of Auger electrons, and alter entanglement formation. We further provide an explicit experimental protocol for atomic Li, to make our proposal concrete.
△ Less
Submitted 11 December, 2018; v1 submitted 18 April, 2018;
originally announced April 2018.
-
Charge separation in donor-C60 complexes with real-time Green's functions: The importance of nonlocal correlations
Authors:
E. Viñas Boström,
A. Mikkelsen,
C. Verdozzi,
E. Perfetto,
G. Stefanucci
Abstract:
We use the Nonequilibrium Green's Function (NEGF) method to perform real-time simulations of the ultrafast electron dynamics of photoexcited donor-C60 complexes modeled by a Pariser-Parr-Pople Hamiltonian. The NEGF results are compared to mean-field Hartree-Fock (HF) calculations to disentangle the role of correlations. Initial benchmarking against numerically highly accurate time-dependent Densit…
▽ More
We use the Nonequilibrium Green's Function (NEGF) method to perform real-time simulations of the ultrafast electron dynamics of photoexcited donor-C60 complexes modeled by a Pariser-Parr-Pople Hamiltonian. The NEGF results are compared to mean-field Hartree-Fock (HF) calculations to disentangle the role of correlations. Initial benchmarking against numerically highly accurate time-dependent Density Matrix Renormalization Group calculations verifies the accuracy of NEGF. We then find that charge-transfer (CT) excitons partially decay into charge separated (CS) states if dynamical non-local correlation corrections are included. This CS process occurs in ~10 fs after photoexcitation. In contrast, the probability of exciton recombination is almost 100% in HF simulations. These results are largely unaffected by nuclear vibrations; the latter become however essential whenever level misalignment hinders the CT process. The robust nature of our findings indicate that ultrafast CS driven by correlation-induced decoherence may occur in many organic nanoscale systems, but it will only be correctly predicted by theoretical treatments that include time-nonlocal correlations.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Hybridization at superconductor-semiconductor interfaces
Authors:
August E. G. Mikkelsen,
Panagiotis Kotetes,
Peter Krogstrup,
Karsten Flensberg
Abstract:
Hybrid superconductor-semiconductor devices are currently one of the most promising platforms for realizing Majorana zero modes. Their topological properties are controlled by the band alignment of the two materials, as well as the electrostatic environment, which are currently not well understood. Here, we pursue to fill in this gap and address the role of band bending and superconductor-semicond…
▽ More
Hybrid superconductor-semiconductor devices are currently one of the most promising platforms for realizing Majorana zero modes. Their topological properties are controlled by the band alignment of the two materials, as well as the electrostatic environment, which are currently not well understood. Here, we pursue to fill in this gap and address the role of band bending and superconductor-semiconductor hybridization in such devices by analyzing a gated single Al-InAs interface using a self-consistent Schrodinger-Poisson approach. Our numerical analysis shows that the band bending leads to an interface quantum well, which localizes the charge in the system near the superconductor-semiconductor interface. We investigate the hybrid band structure and analyze its response to varying the gate voltage and thickness of the Al layer. This is done by studying the hybridization degrees of the individual subbands, which determine the induced pairing and effective $g$-factors. The numerical results are backed by approximate analytical expressions which further clarify key aspects of the band structure. We find that one can obtain states with strong superconductor-semiconductor hybridization at the Fermi energy, but this requires a fine balance of parameters, with the most important constraint being on the width of the Al layer. In fact, in the regime of interest, we find an almost periodic dependence of the hybridization degree on the Al width, with a period roughly equal to the thickness of an Al monolayer. This implies that disorder and shape irregularities, present in realistic devices, may play an important role for averaging out this sensitivity and, thus, may be necessary for stabilizing the topological phase.
△ Less
Submitted 28 August, 2018; v1 submitted 10 January, 2018;
originally announced January 2018.
-
Observation of a topologically non-trivial surface state in half-Heusler PtLuSb (001) thin films
Authors:
J. A. Logan,
S. J. Patel,
S. D. Harrington,
C. M. Polley,
B. D. Schultz,
T. Balasubramanian,
A. Janotti,
A. Mikkelsen,
C. J. Palmstrøm
Abstract:
The discovery of topological insulators (TIs), materials with bulk band gaps and protected cross-gap surface states, in compounds such as Bi2Se3 has generated much interest in identifying topological surface states (TSSs) in other classes of materials. In particular, recent theory calculations suggest that TSSs may be found in half-Heusler ternary compounds. If experimentally realizable, this woul…
▽ More
The discovery of topological insulators (TIs), materials with bulk band gaps and protected cross-gap surface states, in compounds such as Bi2Se3 has generated much interest in identifying topological surface states (TSSs) in other classes of materials. In particular, recent theory calculations suggest that TSSs may be found in half-Heusler ternary compounds. If experimentally realizable, this would provide a materials platform for entirely new heterostructure spintronic devices that make use of the structurally-identical but electronically-varied nature of Heusler compounds. Here, we show the presence of a TSS in epitaxially grown thin films of the half-Heusler compound PtLuSb. Spin and angle-resolved photoemission spectroscopy (ARPES), complemented by theoretical calculations, reveals a surface state with linear dispersion and a helical tangential spin texture consistent with previous predictions. This experimental verification of TI behavior is a significant step forward in establishing half-Heusler compounds as a viable material system for future spintronics devices.
△ Less
Submitted 18 November, 2015; v1 submitted 15 November, 2015;
originally announced November 2015.
-
Time-resolved spectroscopy at surfaces and adsorbate dynamics: insights from a model-system approach
Authors:
Emil Boström,
Anders Mikkelsen,
Claudio Verdozzi
Abstract:
We introduce a model description of femtosecond laser induced desorption at surfaces. The substrate part of the system is taken into account as a (possibly semi-infinite) linear chain. Here, being especially interested in the early stages of dissociation, we consider a finite-size implementation of the model (i.e., a finite substrate), for which an exact numerical solution is possible. By time-evo…
▽ More
We introduce a model description of femtosecond laser induced desorption at surfaces. The substrate part of the system is taken into account as a (possibly semi-infinite) linear chain. Here, being especially interested in the early stages of dissociation, we consider a finite-size implementation of the model (i.e., a finite substrate), for which an exact numerical solution is possible. By time-evolving the many-body wave function, and also using results from a time-dependent density functional theory description for electron-nuclear systems, we analyze the competition between several surface-response mechanisms and electronic correlations in the transient and longer time dynamics under the influence of dipole-coupled fields. Our model allows us to explore how coherent multiple-pulse protocols can impact desorption in a variety of prototypical experiments.
△ Less
Submitted 23 May, 2016; v1 submitted 24 July, 2015;
originally announced July 2015.
-
Photoemission electron microscopy of localized surface plasmons in silver nanostructures at telecommunication wavelengths
Authors:
Erik Mårsell,
Esben W. Larsen,
Cord L. Arnold,
Hongxing Xu,
Johan Mauritsson,
Anders Mikkelsen
Abstract:
We image the field enhancement at Ag nanostructures using femtosecond laser pulses with a center wavelength of 1.55 micrometer. Imaging is based on non-linear photoemission observed in a photoemission electron microscope (PEEM). The images are directly compared to ultra violet PEEM and scanning electron microscopy (SEM) imaging of the same structures. Further, we have carried out atomic scale scan…
▽ More
We image the field enhancement at Ag nanostructures using femtosecond laser pulses with a center wavelength of 1.55 micrometer. Imaging is based on non-linear photoemission observed in a photoemission electron microscope (PEEM). The images are directly compared to ultra violet PEEM and scanning electron microscopy (SEM) imaging of the same structures. Further, we have carried out atomic scale scanning tunneling microscopy (STM) on the same type of Ag nanostructures and on the Au substrate. Measuring the photoelectron spectrum from individual Ag particles shows a larger contribution from higher order photoemission process above the work function threshold than would be predicted by a fully perturbative model, consistent with recent results using shorter wavelengths. Investigating a wide selection of both Ag nanoparticles and nanowires, field enhancement is observed from 30% of the Ag nanoparticles and from none of the nanowires. No laser-induced damage is observed of the nanostructures neither during the PEEM experiments nor in subsequent SEM analysis. By direct comparison of SEM and PEEM images of the same nanostructures, we can conclude that the field enhancement is independent of the average nanostructure size and shape. Instead, we propose that the variations in observed field enhancement could originate from the wedge interface between the substrate and particles electrically connected to the substrate.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
-
Cross-Sectional Scanning Tunneling Microscopy and Spectroscopy of Semimetallic ErAs Nanostructures Embedded in GaAs
Authors:
Jason K. Kawasaki,
Rainer Timm,
Trevor E. Buehl,
Edvin Lundgren,
Anders Mikkelsen,
Arthur C. Gossard,
Chris J. Palmstrøm
Abstract:
The growth and atomic/electronic structure of molecular beam epitaxy (MBE)-grown ErAs nanoparticles and nanorods embedded within a GaAs matrix are examined for the first time via cross-sectional scanning tunneling microscopy (XSTM) and spectroscopy (XSTS). Cross sections enable the interrogation of the internal structure and are well suited for studying embedded nanostructures. The early stages of…
▽ More
The growth and atomic/electronic structure of molecular beam epitaxy (MBE)-grown ErAs nanoparticles and nanorods embedded within a GaAs matrix are examined for the first time via cross-sectional scanning tunneling microscopy (XSTM) and spectroscopy (XSTS). Cross sections enable the interrogation of the internal structure and are well suited for studying embedded nanostructures. The early stages of embedded ErAs nanostructure growth are examined via these techniques and compared with previous cross sectional TEM work. Tunneling spectroscopy I(V) for both ErAs nanoparticles and nanorods was also performed, demonstrating that both nanostructures are semimetallic.
△ Less
Submitted 12 April, 2012;
originally announced April 2012.
-
Local Density of States and Interface Effects in Semimetallic ErAs Nanoparticles Embedded in GaAs
Authors:
Jason K. Kawasaki,
Rainer Timm,
Kris T. Delaney,
Edvin Lundgren,
Anders Mikkelsen,
Chris J. Palmstrøm
Abstract:
The atomic and electronic structures of ErAs nanoparticles embedded within a GaAs matrix are examined via cross-sectional scanning tunneling microscopy and spectroscopy (XSTM/XSTS). The local density of states (LDOS) exhibits a finite minimum at the Fermi level demonstrating that the nanoparticles remain semimetallic despite the predictions of previous models of quantum confinement in ErAs. We als…
▽ More
The atomic and electronic structures of ErAs nanoparticles embedded within a GaAs matrix are examined via cross-sectional scanning tunneling microscopy and spectroscopy (XSTM/XSTS). The local density of states (LDOS) exhibits a finite minimum at the Fermi level demonstrating that the nanoparticles remain semimetallic despite the predictions of previous models of quantum confinement in ErAs. We also use XSTS to measure changes in the LDOS across the ErAs/GaAs interface and propose that the interface atomic structure results in electronic states that prevent the opening of a band gap.
△ Less
Submitted 12 April, 2012;
originally announced April 2012.
-
Structural determination of a low-symmetry surface by low-energy electron diffraction and ab initio calculations: Bi(110)
Authors:
J. Sun,
A. Mikkelsen,
M. Fuglsang Jensen,
Y. M. Koroteev,
G. Bihlmayer,
E. V. Chulkov,
D. L. Adams,
Ph. Hofmann,
K. Pohl
Abstract:
The surface structure of Bi(110) has been investigated by low-energy electron diffraction (LEED) intensity analysis and by first-principles calculations. Diffraction patterns at a sample temperature of 110 K and normal incidence reveal a bulk truncated (1$\times$1) surface without indication of any structural reconstruction despite the presence of dangling bonds on the surface layer. Good agreem…
▽ More
The surface structure of Bi(110) has been investigated by low-energy electron diffraction (LEED) intensity analysis and by first-principles calculations. Diffraction patterns at a sample temperature of 110 K and normal incidence reveal a bulk truncated (1$\times$1) surface without indication of any structural reconstruction despite the presence of dangling bonds on the surface layer. Good agreement is obtained between the calculated and measured diffraction intensities for this complex, low-symmetry surface containing only one mirror-plane symmetry element. No significant interlayer spacing relaxations are found. The Debye temperature for the surface layer is found to be lower than in the bulk, which is indicative of larger vibrational atomic amplitudes at the surface. Meanwhile, the second layer shows a Debye temperature close to the bulk value. The experimental results for the relaxations agree well with those of our first-principles calculation.
△ Less
Submitted 30 June, 2006;
originally announced June 2006.
-
Kinetic hindrance during the initial oxidation of Pd(100) at ambient pressures
Authors:
E. Lundgren,
A. Stierle,
M. Todorova,
J. Gustafson,
A. Mikkelsen,
J. Rogal,
K. Reuter,
J. N. Andersen,
H. Dosch,
M. Scheffler
Abstract:
The oxidation of the Pd(100) surface at oxygen pressures in the 10^-6 to 10^3 mbar range and temperatures up to 1000 K has been studied in-situ by surface x-ray diffraction (SXRD). The results provide direct structural information on the phases present in the surface region and on the kinetics of the oxide formation. Depending on the (T,p) environmental conditions we either observe a thin sqrt(5…
▽ More
The oxidation of the Pd(100) surface at oxygen pressures in the 10^-6 to 10^3 mbar range and temperatures up to 1000 K has been studied in-situ by surface x-ray diffraction (SXRD). The results provide direct structural information on the phases present in the surface region and on the kinetics of the oxide formation. Depending on the (T,p) environmental conditions we either observe a thin sqrt(5) x sqrt(5) R27 surface oxide or the growth of a rough, poorly ordered bulk oxide film of PdO predominantly with (001) orientation. By either comparison to the surface phase diagram from first-principles atomistic thermodynamics or by explicit time-resolved measurements we identify a strong kinetic hindrance to the bulk oxide formation even at temperatures as high as 675 K.
△ Less
Submitted 24 November, 2003;
originally announced November 2003.
-
The Pd(100)-(SQRT(5) x SQRT(5) R27^o)-O surface oxide revisited
Authors:
M. Todorova,
E. Lundgren,
V. Blum,
A. Mikkelsen,
S. Gray,
J. Gustafson,
M. Borg,
J. Rogal,
K. Reuter,
J. N. Andersen,
M. Scheffler
Abstract:
Combining high-resolution core-level spectroscopy (HRCLS), scanning tunneling microscopy (STM) and density-functional theory
(DFT) calculations we reanalyze the Pd(100)-(SQRT(5) x SQRT(5) R27^o)-O surface oxide phase. We find that the prevalent structural model, a rumpled PdO(001) film suggested by previous low energy electron diffraction (LEED) work (M. Saidy et al.,
Surf. Sci. 494, L799 (200…
▽ More
Combining high-resolution core-level spectroscopy (HRCLS), scanning tunneling microscopy (STM) and density-functional theory
(DFT) calculations we reanalyze the Pd(100)-(SQRT(5) x SQRT(5) R27^o)-O surface oxide phase. We find that the prevalent structural model, a rumpled PdO(001) film suggested by previous low energy electron diffraction (LEED) work (M. Saidy et al.,
Surf. Sci. 494, L799 (2001)), is incompatible with all three employed methods. Instead, we suggest the two-dimensional film to consist of a strained PdO(101) layer on top of Pd(100). LEED intensity calculations show that this model is compatible with the experimental data of Saidy et al.
△ Less
Submitted 4 April, 2003;
originally announced April 2003.