Showing 1–43 of 43 results for author: Mikić, Z

Solar Eruptions Triggered by Flux Emergence Below or Near a Coronal Flux Rope

Authors: T. Török, M. G. Linton, J. E. Leake, Z. Mikić, R. Lionello, V. S. Titov, C. Downs

Abstract: Observations have shown a clear association of filament/prominence eruptions with the emergence of magnetic flux in or near filament channels. Magnetohydrodynamic (MHD) simulations have been employed to systematically study the conditions under which such eruptions occur. These simulations to date have modeled filament channels as two-dimensional (2D) flux ropes or 3D uniformly sheared arcades. He… ▽ More Observations have shown a clear association of filament/prominence eruptions with the emergence of magnetic flux in or near filament channels. Magnetohydrodynamic (MHD) simulations have been employed to systematically study the conditions under which such eruptions occur. These simulations to date have modeled filament channels as two-dimensional (2D) flux ropes or 3D uniformly sheared arcades. Here we present MHD simulations of flux emergence into a more realistic configuration consisting of a bipolar active region containing a line-tied 3D flux rope. We use the coronal flux-rope model of Titov et al. (2014) as the initial condition and drive our simulations by imposing boundary conditions extracted from a flux-emergence simulation by Leake et al. (2013). We identify three mechanisms that determine the evolution of the system: (i) reconnection displacing foot points of field lines overlying the coronal flux rope, (ii) changes of the ambient field due to the intrusion of new flux at the boundary, and (iii) interaction of the (axial) electric currents in the pre-existing and newly emerging flux systems. The relative contributions and effects of these mechanisms depend on the properties of the pre-existing and emerging flux systems. Here we focus on the location and orientation of the emerging flux relative to the coronal flux rope. Varying these parameters, we investigate under which conditions an eruption of the latter is triggered. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Comments: 18 pages, 8 figures, accepted for publication by The Astrophysical Journal

The role of asymmetries in coronal rain formation during thermal non-equilibrium cycles

Authors: Gabriel Pelouze, Frédéric Auchère, Karine Bocchialini, Clara Froment, Zoran Mikić, Elie Soubrié, Alfred Voyeux

Abstract: Context: Thermal non-equilibrium (TNE) produces several observables that can be used to constrain the spatial and temporal distribution of solar coronal heating. Its manifestations include prominence formation, coronal rain, and long-period intensity pulsations in coronal loops. The recent observation of abundant periodic coronal rain associated with intensity pulsations by Auchère et al. allows t… ▽ More Context: Thermal non-equilibrium (TNE) produces several observables that can be used to constrain the spatial and temporal distribution of solar coronal heating. Its manifestations include prominence formation, coronal rain, and long-period intensity pulsations in coronal loops. The recent observation of abundant periodic coronal rain associated with intensity pulsations by Auchère et al. allows to unify these two phenomena as the result of TNE condensation and evaporation cycles. On the other hand, many intensity pulsation events observed by Froment et al. show little to no coronal rain formation. Aims: Our goal is to understand why some TNE cycles produce such abundant coronal rain, while others produce little to no rain. Methods: We reconstruct the geometry of the event reported by Auchère et al., using images from STEREO/SECCHI/EUVI and magnetograms from SDO/HMI. We then perform 1D hydrodynamic simulations of this event, for different heating parameters and variations of the loop geometry (9000 simulations in total). We compare the resulting behaviour to simulations of TNE cycles by Froment et al. that do not produce coronal rain. Results: Our simulations show that both prominences and TNE cycles (with and without coronal rain) can form within the same magnetic structure. We show that the formation of coronal rain during TNE cycles depends on the asymmetry of the loop and of the heating. Asymmetric loops are overall less likely to produce coronal rain, regardless of the heating. In symmetric loops, coronal rain forms when the heating is also symmetric. In asymmetric loops, rain forms only when the heating compensates the asymmetry. △ Less

Submitted 19 October, 2021; originally announced October 2021.

Comments: Accepted for publication in A&A. 15 pages, 8 figures

Journal ref: A&A 658, A71 (2022)

Variations in Finite Difference Potential Fields

Authors: Ronald M. Caplan, Cooper Downs, Jon A. Linker, Zoran Mikic

Abstract: The potential field (PF) solution of the solar corona is a vital modeling tool for a wide range of applications, including minimum energy estimates, coronal magnetic field modeling, and empirical solar wind solutions. Given its popularity, it is important to understand how choices made in computing a PF may influence key properties of the solution. Here we study PF solutions for the global coronal… ▽ More The potential field (PF) solution of the solar corona is a vital modeling tool for a wide range of applications, including minimum energy estimates, coronal magnetic field modeling, and empirical solar wind solutions. Given its popularity, it is important to understand how choices made in computing a PF may influence key properties of the solution. Here we study PF solutions for the global coronal magnetic field on 2012 June 13, computed with our high-performance finite difference code POT3D. Solutions are analyzed for their global properties and locally around NOAA AR 11504, using the net open flux, open field boundaries, total magnetic energy, and magnetic structure as metrics. We explore how PF solutions depend on 1) the data source, type, and processing of the inner boundary conditions, 2) the choice of the outer boundary condition height and type, and 3) the numerical resolution and spatial scale of information at the lower boundary. We discuss the various qualitative and quantitative differences that naturally arise by using different maps as input, and illustrate how coronal morphology and open flux depend most strongly on the outer boundary condition. We also show how large-scale morphologies and the open magnetic flux are remarkably insensitive to model resolution, while the surface map** and embedded magnetic complexity vary considerably. This establishes important context for past, current, and future applications of the PF for coronal and solar wind modeling. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Comments: 27 pages, 18 figures

Exploring Plasma Heating in the Current Sheet Region in a Three-Dimensional Coronal Mass Ejection Simulation

Authors: Katharine K. Reeves, Tibor Török, Zoran Mikić, Jon Linker, Nicholas A. Murphy

Abstract: We simulate a coronal mass ejection (CME) using a three-dimensional magnetohydrodynamic (MHD) code that includes coronal heating, thermal conduction, and radiative cooling in the energy equation. The magnetic flux distribution at 1 R$_s$ is produced by a localized subsurface dipole superimposed on a global dipole field, mimicking the presence of an active region within the global corona. Transvers… ▽ More We simulate a coronal mass ejection (CME) using a three-dimensional magnetohydrodynamic (MHD) code that includes coronal heating, thermal conduction, and radiative cooling in the energy equation. The magnetic flux distribution at 1 R$_s$ is produced by a localized subsurface dipole superimposed on a global dipole field, mimicking the presence of an active region within the global corona. Transverse electric fields are applied near the polarity inversion line to introduce a transverse magnetic field, followed by the imposition of a converging flow to form and destabilize a flux rope, producing an eruption. We examine the quantities responsible for plasma heating and cooling during the eruption, including thermal conduction, radiation, adiabatic effects, coronal heating, and ohmic heating. We find that ohmic heating is an important contributor to hot temperatures in the current sheet region early in the eruption, but in the late phase adiabatic compression plays an important role in heating the plasma there. Thermal conduction also plays an important role in the transport of thermal energy away from the current sheet region throughout the reconnection process, producing a ``thermal halo'' and widening the region of high temperatures. We simulate emission from solar telescopes for this eruption and find that there is evidence for emission from heated plasma above the flare loops late in the eruption, when the adiabatic heating is the dominant heating term. These results provide an explanation for hot supra-arcade plasma sheets that are often observed in X-rays and extreme ultraviolet wavelengths during the decay phase of large flares. △ Less

Submitted 11 October, 2019; originally announced October 2019.

Comments: 22 pages, 12 figures

Slip-Back Map** as a Tracker of Topological Changes in Evolving Magnetic Configurations

Authors: R. Lionello, V. S. Titov, Z. Mikić, J. A. Linker

Abstract: The topology of the coronal magnetic field produces a strong impact on the properties of the solar corona and presumably on the origin of the slow solar wind. To advance our understanding of this impact, we revisit the concept of so-called slip-back map** (Titov et al. 2009) and adapt it for determining open, closed, and disconnected flux systems that are formed in the solar corona by magnetic r… ▽ More The topology of the coronal magnetic field produces a strong impact on the properties of the solar corona and presumably on the origin of the slow solar wind. To advance our understanding of this impact, we revisit the concept of so-called slip-back map** (Titov et al. 2009) and adapt it for determining open, closed, and disconnected flux systems that are formed in the solar corona by magnetic reconnection during a given time interval. The developed method allows us, in particular, to describe the magnetic flux transfer between open and closed flux regions via so-called interchange reconnection with an unprecedented level of details. We illustrate the application of this method to the analysis of the global MHD evolution of the solar corona that is driven by an idealized differential rotation of the photospheric plasma. △ Less

Submitted 6 January, 2020; v1 submitted 3 May, 2019; originally announced May 2019.

Comments: To appear in Ap.J

Predicting the Structure of the Solar Corona and Inner Heliosphere during Parker Solar Probe's First Perihelion Pass

Authors: Pete Riley, Cooper Downs, Jon A. Linker, Zoran Mikic, Roberto Lionello, Ronald M. Caplan

Abstract: NASA's Parker Solar Probe (Parker) spacecraft reached its first perihelion of 35.7 solar radii on November 5th, 2018. To aid in mission planning, and in anticipation of the unprecedented measurements to be returned, in late October, we developed a three-dimensional magnetohydrodynamic (MHD) solution for the solar corona and inner heliosphere, driven by the then available observations of the Sun's… ▽ More NASA's Parker Solar Probe (Parker) spacecraft reached its first perihelion of 35.7 solar radii on November 5th, 2018. To aid in mission planning, and in anticipation of the unprecedented measurements to be returned, in late October, we developed a three-dimensional magnetohydrodynamic (MHD) solution for the solar corona and inner heliosphere, driven by the then available observations of the Sun's photospheric magnetic field. Our model incorporates a wave-turbulence-driven (WTD) model to heat the corona. Here, we present our predictions for the structure of the solar corona and the likely {\it in situ} measurements that Parker will be returning over the next few months. We infer that, in the days prior to 1st Encounter, Parker was immersed in wind emanating from a positive-polarity equatorial coronal hole. During the encounter, however, field lines from the spacecraft mapped to another, negative-polarity equatorial coronal hole. Following the encounter, Parker was magnetically connected to the large, positive-polarity northern polar coronal hole. When the Parker data become available, these model results can be used to assist in their calibration and interpretation, and, additionally, provide a global context for interpreting the localized {\it in situ} measurements. In particular, we can identify what types of solar wind Parker encountered, what the underlying magnetic structure was, and how complexities in the orbital trajectory can be interpreted within a global, inertial frame. Ultimately, the measurements returned by Parker can be used to constrain current theories for heating the solar corona and accelerating the solar wind. △ Less

Submitted 3 June, 2019; v1 submitted 25 February, 2019; originally announced February 2019.

Ion Charge States in a Time-Dependent Wave-Turbulence-Driven Model of the Solar Wind

Authors: Roberto Lionello, Cooper Downs, Jon A. Linker, Zoran Mikić, John Raymond, Chengcai Shen, Marco Velli

Abstract: Ion fractional charge states, measured in situ in the heliosphere, depend on the properties of the plasma in the inner corona. As the ions travel outward in the solar wind and the electron density drops, the charge states remain essentially unaltered or "frozen in". Thus they can provide a powerful constraint on heating models of the corona and acceleration of the solar wind. We have implemented n… ▽ More Ion fractional charge states, measured in situ in the heliosphere, depend on the properties of the plasma in the inner corona. As the ions travel outward in the solar wind and the electron density drops, the charge states remain essentially unaltered or "frozen in". Thus they can provide a powerful constraint on heating models of the corona and acceleration of the solar wind. We have implemented non-equilibrium ionization calculations into a 1D wave-turbulence-driven (WTD) hydrodynamic solar wind model and compared modeled charge states with the Ulysses 1994-5 in situ measurements. We have found that modeled charge state ratios of $C^{6+}/C^{5+}$ and $O^{7+}/O^{6+}$, among others, were too low compared with Ulysses measurements. However, a heuristic reduction of the plasma flow speed has been able to bring the modeled results in line with observations, though other ideas have been proposed to address this discrepancy. We discuss implications of our results and the prospect of including ion charge state calculations into our 3D MHD model of the inner heliosphere. △ Less

Submitted 11 January, 2019; originally announced January 2019.

Comments: To appear in Solar Physics

GPU Acceleration of an Established Solar MHD Code using OpenACC

Authors: R. M. Caplan, J. A. Linker, Z. Mikić, C. Downs, T. Török, V. S. Titov

Abstract: GPU accelerators have had a notable impact on high-performance computing across many disciplines. They provide high performance with low cost/power, and therefore have become a primary compute resource on many of the largest supercomputers. Here, we implement multi-GPU acceleration into our Solar MHD code (MAS) using OpenACC in a fully portable, single-source manner. Our preliminary implementation… ▽ More GPU accelerators have had a notable impact on high-performance computing across many disciplines. They provide high performance with low cost/power, and therefore have become a primary compute resource on many of the largest supercomputers. Here, we implement multi-GPU acceleration into our Solar MHD code (MAS) using OpenACC in a fully portable, single-source manner. Our preliminary implementation is focused on MAS running in a reduced physics "zero-beta" mode. While valuable on its own, our main goal is to pave the way for a full physics, thermodynamic MHD implementation. We describe the OpenACC implementation methodology and challenges. "Time-to-solution" performance results of a production-level flux rope eruption simulation on multi-CPU and multi-GPU systems are shown. We find that the GPU-accelerated MAS code has the ability to run "zero-beta" simulations on a single multi-GPU server at speeds previously requiring multiple CPU server-nodes of a supercomputer. △ Less

Submitted 6 November, 2018; originally announced November 2018.

Comments: 13 pages, 9 figures

Global Non-Potential Magnetic Models of the Solar Corona During the March 2015 Eclipse

Authors: A. R. Yeates, T. Amari, I. Contopoulos, X. Feng, D. H. Mackay, Z. Mikić, T. Wiegelmann, J. Hutton, C. A. Lowder, H. Morgan, G. Petrie, L. A. Rachmeler, L. A. Upton, A. Canou, P. Chopin, C. Downs, M. Druckmüller, J. A. Linker, D. B. Seaton, T. Török

Abstract: Seven different models are applied to the same problem of simulating the Sun's coronal magnetic field during the solar eclipse on 2015 March 20. All of the models are non-potential, allowing for free magnetic energy, but the associated electric currents are developed in significantly different ways. This is not a direct comparison of the coronal modelling techniques, in that the different models a… ▽ More Seven different models are applied to the same problem of simulating the Sun's coronal magnetic field during the solar eclipse on 2015 March 20. All of the models are non-potential, allowing for free magnetic energy, but the associated electric currents are developed in significantly different ways. This is not a direct comparison of the coronal modelling techniques, in that the different models also use different photospheric boundary conditions, reflecting the range of approaches currently used in the community. Despite the significant differences, the results show broad agreement in the overall magnetic topology. Among those models with significant volume currents in much of the corona, there is general agreement that the ratio of total to potential magnetic energy should be approximately 1.4. However, there are significant differences in the electric current distributions; while static extrapolations are best able to reproduce active regions, they are unable to recover sheared magnetic fields in filament channels using currently available vector magnetogram data. By contrast, time-evolving simulations can recover the filament channel fields at the expense of not matching the observed vector magnetic fields within active regions. We suggest that, at present, the best approach may be a hybrid model using static extrapolations but with additional energization informed by simplified evolution models. This is demonstrated by one of the models. △ Less

Submitted 2 August, 2018; originally announced August 2018.

Comments: 29 pages, 11 figures, accepted for publication in Space Science Reviews

Identifying Observables that can Differentiate Between Impulsive and Footpoint Heating: Time Lags and Intensity Ratios

Authors: Amy R. Winebarger, Roberto Lionello, Cooper Downs, Zoran Mikic, Jon Linker

Abstract: Observations of coronal loops have identified several common loop characteristics, including that loops appear to cool and have higher than expected densities. Two potential heating scenarios have been suggested to explain these observations. One scenario is that the loops are heated by a series of small-scale impulsive heating events, or nanoflares. Another hypothesis is that the heating is quasi… ▽ More Observations of coronal loops have identified several common loop characteristics, including that loops appear to cool and have higher than expected densities. Two potential heating scenarios have been suggested to explain these observations. One scenario is that the loops are heated by a series of small-scale impulsive heating events, or nanoflares. Another hypothesis is that the heating is quasi-steady and highly-stratified, i.e., ``footpoint heating'. The goal of this paper is to identify observables that can be used to differentiate between these two heating scenarios. For footpoint heating, we vary the heating magnitude and stratification, for impulsive heating, we vary the heating magnitude. We use one-dimensional hydrodynamic codes to calculate the resulting temperature and density evolution and expected lightcurves in four channels of AIA and one channel of XRT. We consider two principal diagnostics: the time lag between the appearance of the loop in two different channels, and the ratio of the peak intensities of the loop in the two channels. We find that 1) footpoint heating can predict longer time lags than impulsive heating, 2) footpoint heating can predict zero or negative time lags, 3) the intensity ratio expected from impulsive heating is confined to a narrow range, while footpoint heating predicts a wider range of intensity ratios, and 4) the range of temperatures expected in impulsive heating is broader than the range of temperatures expected in footpoint heating. This preliminary study identifies observables that may be useful in discriminating between heating models in future work. △ Less

Submitted 11 September, 2018; v1 submitted 14 June, 2018; originally announced June 2018.

On the occurrence of thermal non-equilibrium in coronal loops

Authors: C. Froment, F. Auchère, Z. Mikić, G. Aulanier, K. Bocchialini, E. Buchlin, J. Solomon, E. Soubrié

Abstract: Long-period EUV pulsations, recently discovered to be common in active regions, are understood to be the coronal manifestation of thermal non-equilibrium (TNE). The active regions previously studied with EIT/SOHO and AIA/SDO indicated that long-period intensity pulsations are localized in only one or two loop bundles. The basic idea of this study is to understand why. For this purpose, we tested t… ▽ More Long-period EUV pulsations, recently discovered to be common in active regions, are understood to be the coronal manifestation of thermal non-equilibrium (TNE). The active regions previously studied with EIT/SOHO and AIA/SDO indicated that long-period intensity pulsations are localized in only one or two loop bundles. The basic idea of this study is to understand why. For this purpose, we tested the response of different loop systems, using different magnetic configurations, to different stratifications and strengths of the heating. We present an extensive parameter-space study using 1D hydrodynamic simulations (1,020 in total) and conclude that the occurrence of TNE requires specific combinations of parameters. Our study shows that the TNE cycles are confined to specific ranges in parameter space. This naturally explains why only some loops undergo constant periodic pulsations over several days: since the loop geometry and the heating properties generally vary from one loop to another in an active region, only the ones in which these parameters are compatible exhibits TNE cycles. Furthermore, these parameters (heating and geometry) are likely to vary significantly over the duration of a cycle, which potentially limits the possibilities of periodic behavior. This study also confirms that long-period intensity pulsations and coronal rain are two aspects of the same phenomenon: both phenomena can occur for similar heating conditions and can appear simultaneously in the simulations. △ Less

Submitted 12 February, 2018; originally announced February 2018.

Comments: 26 pages, 17 figures, accepted for publication in The Astrophysical journal

Sun-to-Earth MHD Simulation of the 14 July 2000 "Bastille Day" Eruption

Authors: Tibor Török, Cooper Downs, Jon A. Linker, Roberto Lionello, Viacheslav S. Titov, Zoran Mikić, Pete Riley, Ron M. Caplan, Janvier Wijaya

Abstract: Solar eruptions are the main driver of space-weather disturbances at the Earth. Extreme events are of particular interest, not only because of the scientific challenges they pose, but also because of their possible societal consequences. Here we present a magnetohydrodynamic (MHD) simulation of the 14 July 2000 Bastille Day eruption, which produced a very strong geomagnetic storm. After constructi… ▽ More Solar eruptions are the main driver of space-weather disturbances at the Earth. Extreme events are of particular interest, not only because of the scientific challenges they pose, but also because of their possible societal consequences. Here we present a magnetohydrodynamic (MHD) simulation of the 14 July 2000 Bastille Day eruption, which produced a very strong geomagnetic storm. After constructing a thermodynamic MHD model of the corona and solar wind, we insert a magnetically stable flux rope along the polarity inversion line of the eruption's source region and initiate the eruption by boundary flows. More than 10^33 ergs of magnetic energy are released in the eruption within a few minutes, driving a flare, an EUV wave, and a coronal mass ejection (CME) that travels in the outer corona at about 1500 km/s, close to the observed speed. We then propagate the CME to Earth, using a heliospheric MHD code. Our simulation thus provides the opportunity to test how well in situ observations of extreme events are matched if the eruption is initiated from a stable magnetic-equilibrium state. We find that the flux-rope center is very similar in character to the observed magnetic cloud, but arrives about 8.5 hours later and about 15 degrees too far to the North, with field strengths that are too weak by a factor of about 1.6. The front of the flux rope is highly distorted, exhibiting localized magnetic-field concentrations as it passes 1 AU. We discuss these properties with regard to the development of space-weather predictions based on MHD simulations of solar eruptions. △ Less

Submitted 17 January, 2018; originally announced January 2018.

Comments: 27 pages, 13 figures, under revision for publication in the Astrophysical Journal

Regularized Biot-Savart Laws for Modeling Magnetic Flux Ropes

Authors: Viacheslav S. Titov, Cooper Downs, Zoran Mikić, Tibor Török, Jon A. Linker, Ronald M. Caplan

Abstract: Many existing models assume that magnetic flux ropes play a key role in solar flares and coronal mass ejections (CMEs). It is therefore important to develop efficient methods for constructing flux-rope configurations constrained by observed magnetic data and the morphology of the pre-eruptive source region. For this purpose, we have derived and implemented a compact analytical form that represents… ▽ More Many existing models assume that magnetic flux ropes play a key role in solar flares and coronal mass ejections (CMEs). It is therefore important to develop efficient methods for constructing flux-rope configurations constrained by observed magnetic data and the morphology of the pre-eruptive source region. For this purpose, we have derived and implemented a compact analytical form that represents the magnetic field of a thin flux rope with an axis of arbitrary shape and circular cross-sections. This form implies that the flux rope carries axial current $I$ and axial flux $F$, so that the respective magnetic field is the curl of the sum of axial and azimuthal vector potentials proportional to $I$ and $F$, respectively. We expressed the vector potentials in terms of modified Biot-Savart laws whose kernels are regularized at the axis in such a way that, when the axis is straight, these laws define a cylindrical force-free flux rope with a parabolic profile for the axial current density. For the cases we have studied so far, we determined the shape of the rope axis by following the polarity inversion line of the eruptions' source region, using observed magnetograms. The height variation along the axis and other flux-rope parameters are estimated by means of potential field extrapolations. Using this heuristic approach, we were able to construct pre-eruption configurations for the 2009 February 13 and 2011 October 1 CME events. These applications demonstrate the flexibility and efficiency of our new method for energizing pre-eruptive configurations in simulations of CMEs. △ Less

Submitted 18 December, 2017; originally announced December 2017.

Comments: 9 pages with 5 figures

From MPI to MPI+OpenACC: Conversion of a legacy FORTRAN PCG solver for the spherical Laplace equation

Authors: Ronald M. Caplan, Zoran Mikic, Jon A. Linker

Abstract: A real-world example of adding OpenACC to a legacy MPI FORTRAN Preconditioned Conjugate Gradient code is described, and timing results for multi-node multi-GPU runs are shown. The code is used to obtain three-dimensional spherical solutions to the Laplace equation. Its application is finding potential field solutions of the solar corona, a useful tool in space weather modeling. We highlight key ti… ▽ More A real-world example of adding OpenACC to a legacy MPI FORTRAN Preconditioned Conjugate Gradient code is described, and timing results for multi-node multi-GPU runs are shown. The code is used to obtain three-dimensional spherical solutions to the Laplace equation. Its application is finding potential field solutions of the solar corona, a useful tool in space weather modeling. We highlight key tips, strategies, and challenges faced when adding OpenACC. Performance results are shown for running the code with MPI-only on multiple CPUs, and with MPI+OpenACC on multiple GPUs and CPUs. △ Less

Submitted 29 December, 2017; v1 submitted 4 September, 2017; originally announced September 2017.

Comments: 18 pages, 4 figures. Work presented at the 2017 NVIDIA GPU Technology Conference

ACM Class: G.4

The Open Flux Problem

Authors: J. A. Linker, R. M. Caplan, C. Downs, P Riley, Z Mikic, R. Lionello, C. J. Henney, C. N. Arge, Y. Liu, M. L. Derosa, A. Yeates, M. J. Owens

Abstract: The heliospheric magnetic field is of pivotal importance in solar and space physics. The field is rooted in the Sun's photosphere, where it has been observed for many years. Global maps of the solar magnetic field based on full disk magnetograms are commonly used as boundary conditions for coronal and solar wind models. Two primary observational constraints on the models are (1) the open field reg… ▽ More The heliospheric magnetic field is of pivotal importance in solar and space physics. The field is rooted in the Sun's photosphere, where it has been observed for many years. Global maps of the solar magnetic field based on full disk magnetograms are commonly used as boundary conditions for coronal and solar wind models. Two primary observational constraints on the models are (1) the open field regions in the model should approximately correspond to coronal holes observed in emission, and (2) the magnitude of the open magnetic flux in the model should match that inferred from in situ spacecraft measurements. In this study, we calculate both MHD and PFSS solutions using fourteen different magnetic maps produced from five different types of observatory magnetograms, for the time period surrounding July, 2010. We have found that for all of the model/map combinations, models that have coronal hole areas close to observations underestimate the interplanetary magnetic flux, or, conversely, for models to match the interplanetary flux, the modeled open field regions are larger than coronal holes observed in EUV emission. In an alternative approach, we estimate the open magnetic flux entirely from solar observations by combining automatically detected coronal holes for Carrington rotation 2098 with observatory synoptic magnetic maps. This approach also underestimates the interplanetary magnetic flux. Our results imply that either typical observatory maps underestimate the Sun's magnetic flux, or a significant portion of the open magnetic flux is not rooted in regions that are obviously dark in EUV and X-ray emission. △ Less

Submitted 5 September, 2017; v1 submitted 7 August, 2017; originally announced August 2017.

2010 August 1-2 sympathetic eruptions: II. Magnetic topology of the MHD background field

Authors: Viacheslav S. Titov, Zoran Mikic, Tibor Torok, Jon A. Linker, Olga Panasenco

Abstract: Using a potential field source surface (PFSS) model, we recently analyzed the global topology of the background coronal magnetic field for a sequence of coronal mass ejections (CMEs) that occurred on 2010 August 1-2. Here we repeat this analysis for the background field reproduced by a magnetohydrodynamic (MHD) model that incorporates plasma thermodynamics. As for the PFSS model, we find that all… ▽ More Using a potential field source surface (PFSS) model, we recently analyzed the global topology of the background coronal magnetic field for a sequence of coronal mass ejections (CMEs) that occurred on 2010 August 1-2. Here we repeat this analysis for the background field reproduced by a magnetohydrodynamic (MHD) model that incorporates plasma thermodynamics. As for the PFSS model, we find that all three CME source regions contain a coronal hole that is separated from neighboring coronal holes by topologically very similar pseudo-streamer structures. However, the two models yield very different results for the size, shape, and flux of the coronal holes. We find that the helmet-streamer cusp line, which corresponds to a source-surface null line in the PFSS model, is structurally unstable and does not form in the MHD model. Our analysis indicates that generally, in MHD configurations, this line rather consists of a multiple-null separator passing along the edge of disconnected flux regions. Some of these regions are transient and may be the origin of so-called streamer blobs. We show that the core topological structure of such blobs is a three-dimensional "plasmoid", consisting of two conjoined flux ropes of opposite handedness, which connect at a spiral null point of the magnetic field. Our analysis reveals that such plasmoids appear also in pseudo-streamers on much smaller scales. These new insights into the coronal magnetic topology provide some intriguing implications for solar energetic particle events and for the properties of the slow solar wind. △ Less

Submitted 24 July, 2017; originally announced July 2017.

Comments: 29 pages, 7 figures

Long-Period Intensity Pulsations in Coronal Loops Explained by Thermal Non-Equilibrium Cycles

Authors: Clara Froment, Frédéric Auchère, Guillaume Aulanier, Zoran Mikić, Karine Bocchialini, Eric Buchlin, Jacques Solomon

Abstract: In solar coronal loops, thermal non-equilibrium (TNE) is a phenomenon that can occur when the heating is both highly-stratified and quasi-constant. Unambiguous observational identification of TNE would thus permit to strongly constrain heating scenarios. Up to now, while TNE is the standard interpretation of coronal rain, the long-term periodic evolution predicted by simulations has never been obs… ▽ More In solar coronal loops, thermal non-equilibrium (TNE) is a phenomenon that can occur when the heating is both highly-stratified and quasi-constant. Unambiguous observational identification of TNE would thus permit to strongly constrain heating scenarios. Up to now, while TNE is the standard interpretation of coronal rain, the long-term periodic evolution predicted by simulations has never been observed yet. However, the detection of long-period intensity pulsations (periods of several hours) has been recently reported with SoHO/EIT, and this phenomenon appears to be very common in loops. Moreover, the three intensity-pulsation events that we recently studied with SDO/AIA show strong evidence for TNE in warm loops. In the present paper, a realistic loop geometry from LFFF extrapolations is used as input to 1D hydrodynamic simulations. Our simulations show that for the present loop geometry, the heating has to be asymmetrical to produce TNE. We analyse in detail one particular simulation that reproduces the average thermal behavior of one of the pulsating loop bundle observed with AIA. We compare the properties of this simulation with the properties deduced from the observations. The magnetic topology of the LFFF extrapolations points to the presence of sites of preferred reconnection at one footpoint, supporting the presence of asymmetric heating. In addition, we can reproduce the temporal large-scale intensity properties of the pulsating loops. This simulation further strengthens the interpretation of the observed pulsations as signatures of TNE. This thus gives important information on the heating localization and time scale for these loops. △ Less

Submitted 5 January, 2017; originally announced January 2017.

Comments: 17 pages, 12 figures, accepted for publication in The Astrophysical journal

The Contribution of Coronal Jets To The Solar Wind

Authors: R. Lionello, T. TÖrÖk, V. S. Titov, J. E. Leake, Z. MikiĆ, J. A. Linker, M. G. Linton

Abstract: Transient collimated plasma eruptions in the solar corona, commonly known as coronal (or X-ray) jets, are among the most interesting manifestations of solar activity. It has been suggested that these events contribute to the mass and energy content of the corona and solar wind, but the extent of these contributions remains uncertain. We have recently modeled the formation and evolution of coronal… ▽ More Transient collimated plasma eruptions in the solar corona, commonly known as coronal (or X-ray) jets, are among the most interesting manifestations of solar activity. It has been suggested that these events contribute to the mass and energy content of the corona and solar wind, but the extent of these contributions remains uncertain. We have recently modeled the formation and evolution of coronal jets using a three-dimensional (3D) magnetohydrodynamic (MHD) code with thermodynamics in a large spherical domain that includes the solar wind. Our model is coupled to 3D MHD flux-emergence simulations, i.e, we use boundary conditions provided by such simulations to drive a time-dependent coronal evolution. The model includes parametric coronal heating, radiative losses, and thermal conduction, which enables us to simulate the dynamics and plasma properties of coronal jets in a more realistic manner than done so far. Here we employ these simulations to calculate the amount of mass and energy transported by coronal jets into the outer corona and inner heliosphere. Based on observed jet-occurrence rates, we then estimate the total contribution of coronal jets to the mass and energy content of the solar wind to (0.4-3.0) % and (0.3-1.0) %, respectively. Our results are largely consistent with the few previous rough estimates obtained from observations, supporting the conjecture that coronal jets provide only a small amount of mass and energy to the solar wind. We emphasize, however, that more advanced observations and simulations are needed to substantiate this conjecture. △ Less

Submitted 10 October, 2016; originally announced October 2016.

Closed-Field Coronal Heating Driven by Wave Turbulence

Authors: Cooper Downs, Roberto Lionello, Zoran Mikić, Jon A. Linker, Marco Velli

Abstract: To simulate the energy balance of coronal plasmas on macroscopic scales, we often require the specification of the coronal heating mechanism in some functional form. To go beyond empirical formulations and to build a more physically motivated heating function, we investigate the wave-turbulence-driven (WTD) phenomenology for the heating of closed coronal loops. Our implementation is designed to ca… ▽ More To simulate the energy balance of coronal plasmas on macroscopic scales, we often require the specification of the coronal heating mechanism in some functional form. To go beyond empirical formulations and to build a more physically motivated heating function, we investigate the wave-turbulence-driven (WTD) phenomenology for the heating of closed coronal loops. Our implementation is designed to capture the large-scale propagation, reflection, and dissipation of wave turbulence along a loop. The parameter space of this model is explored by solving the coupled WTD and hydrodynamic evolution in 1D for an idealized loop. The relevance to a range of solar conditions is also established by computing solutions for over one hundred loops extracted from a realistic 3D coronal field. Due to the implicit dependence of the WTD heating model on loop geometry and plasma properties along the loop and at the footpoints, we find that this model can significantly reduce the number of free parameters when compared to traditional empirical heating models, and still robustly describe a broad range of quiet-sun and active region conditions. The importance of the self-reflection term in producing relatively short heating scale heights and thermal nonequilibrium cycles is also discussed. △ Less

Submitted 6 October, 2016; originally announced October 2016.

Comments: Accepted to ApJ, September 30, 2016

Advancing parabolic operators in thermodynamic MHD models: Explicit super time-step** versus implicit schemes with Krylov solvers

Authors: Ronald M. Caplan, Zoran Mikic, Jon A. Linker, Roberto Lionello

Abstract: We explore the performance and advantages/disadvantages of using unconditionally stable explicit super time-step** (STS) algorithms versus implicit schemes with Krylov solvers for integrating parabolic operators in thermodynamic MHD models of the solar corona. Specifically, we compare the second-order Runge-Kutta Legendre (RKL2) STS method with the implicit backward Euler scheme computed using t… ▽ More We explore the performance and advantages/disadvantages of using unconditionally stable explicit super time-step** (STS) algorithms versus implicit schemes with Krylov solvers for integrating parabolic operators in thermodynamic MHD models of the solar corona. Specifically, we compare the second-order Runge-Kutta Legendre (RKL2) STS method with the implicit backward Euler scheme computed using the preconditioned conjugate gradient (PCG) solver with both a point-Jacobi and a non-overlap** domain decomposition ILU0 preconditioner. The algorithms are used to integrate anisotropic Spitzer thermal conduction and artificial kinematic viscosity at time-steps much larger than classic explicit stability criteria allow. A key component of the comparison is the use of an established MHD model (MAS) to compute a real-world simulation on a large HPC cluster. Special attention is placed on the parallel scaling of the algorithms. It is shown that, for a specific problem and model, the RKL2 method is comparable or surpasses the implicit method with PCG solvers in performance and scaling, but suffers from some accuracy limitations. These limitations, and the applicability of RKL methods are briefly discussed. △ Less

Submitted 4 October, 2016; originally announced October 2016.

Comments: 22 pages, 13 figures. Submitted to conference proceedings of ASTRONUM 2016 June 6-10 Monterey, CA USA

Can Large Time Delays Observed in Light Curves of Coronal Loops be Explained by Impulsive Heating?

Authors: Roberto Lionello, Caroline E. Alexander, Amy R. Winebarger, Jon A. Linker, Zoran Mikić

Abstract: The light curves of solar coronal loops often peak first in channels associated with higher temperatures and then in those associated with lower. The time delays between the different narrowband EUV channels have been measured for many individual loops and recently for every pixel of an active region observation. Time delays between channels for an active region exhibit a wide range of values, wit… ▽ More The light curves of solar coronal loops often peak first in channels associated with higher temperatures and then in those associated with lower. The time delays between the different narrowband EUV channels have been measured for many individual loops and recently for every pixel of an active region observation. Time delays between channels for an active region exhibit a wide range of values, with maxima $>$ 5,000\,s. These large time delays make up 3-26\% (depending on the channel pair) of the pixels where a significant, positive time delay is measured. It has been suggested that time delays can be explained by impulsive heating. In this paper, we investigate whether the largest observed time delays can be explained by this hypothesis by simulating a series of coronal loops with different heating rates, loop lengths, abundances, and geometries to determine the range of expected time delays between a set of four EUV channels. We find that impulsive heating cannot address the largest time delays observed in two of the channel pairs and that the majority of the large time delays can only be explained by long, expanding loops with photospheric abundances. Additional observations may rule out these simulations as an explanation for the long time delays. We suggest that either the time delays found in this manner may not be representative of real loop evolution, or that the impulsive heating and cooling scenario may be too simple to explain the observations and other heating scenarios must be explored. △ Less

Submitted 18 December, 2015; originally announced December 2015.

Modeling Jets in the Corona and Solar Wind

Authors: T. Torok, R. Lionello, V. S. Titov, J. E. Leake, Z. Mikic, J. A. Linker, M. G. Linton

Abstract: Coronal jets are transient, collimated eruptions that occur in regions of predominantly open magnetic field in the solar corona. Our understanding of these events has greatly evolved in recent years but several open questions, such as the contribution of coronal jets to the solar wind, remain. Here we present an overview of the observations and numerical modeling of coronal jets, followed by a bri… ▽ More Coronal jets are transient, collimated eruptions that occur in regions of predominantly open magnetic field in the solar corona. Our understanding of these events has greatly evolved in recent years but several open questions, such as the contribution of coronal jets to the solar wind, remain. Here we present an overview of the observations and numerical modeling of coronal jets, followed by a brief description of "next-generation" simulations that include an advanced description of the energy transfer in the corona ("thermodynamic MHD"), large spherical computational domains, and the solar wind. These new models will allow us to address some of the open questions. △ Less

Submitted 30 November, 2015; originally announced November 2015.

Comments: 12 pages, 4 figures, to appear in ASP proceedings

Application of a Solar Wind Model Driven by Turbulence Dissipation to a 2D Magnetic Field Configuration

Authors: Roberto Lionello, Marco Velli, Cooper Downs, Jon A. Linker, Zoran Mikić

Abstract: Although it is widely accepted that photospheric motions provide the energy source and that the magnetic field must play a key role in the process, the detailed mechanisms responsible for heating the Sun's corona and accelerating the solar wind are still not fully understood. Cranmer et al. (2007) developed a sophisticated, 1D, time-steady model of the solar wind with turbulence dissipation. By va… ▽ More Although it is widely accepted that photospheric motions provide the energy source and that the magnetic field must play a key role in the process, the detailed mechanisms responsible for heating the Sun's corona and accelerating the solar wind are still not fully understood. Cranmer et al. (2007) developed a sophisticated, 1D, time-steady model of the solar wind with turbulence dissipation. By varying the coronal magnetic field, they obtain, for a single choice of wave properties, a realistic range of slow and fast wind conditions with a sharp latitudinal transition between the two streams. Using a 1D, time-dependent model of the solar wind of Lionello et al. (2014), which incorporates turbulent dissipation of Alfvén waves to provide heating and acceleration of the plasma, we have explored a similar configuration, obtaining qualitatively equivalent results. However, our calculations suggest that the rapid transition between slow and fast wind suggested by this 1D model may be disrupted in multidimensional MHD simulations by the requirement of transverse force balance. △ Less

Submitted 7 October, 2014; originally announced October 2014.

3D Coronal Density Reconstruction and Retrieving the Magnetic Field Structure during Solar Minimum

Authors: M. Kramar, V. Airapetian, Z. Mikić, J. Davila

Abstract: Measurement of the coronal magnetic field is a crucial ingredient in understanding the nature of solar coronal phenomena at all scales. We employed STEREO/COR1 data obtained during a deep minimum of solar activity in February 2008 (Carrington rotation CR 2066) to retrieve and analyze the three-dimensional (3D) coronal electron density in the range of heights from 1.5 to 4 Rsun using a tomography m… ▽ More Measurement of the coronal magnetic field is a crucial ingredient in understanding the nature of solar coronal phenomena at all scales. We employed STEREO/COR1 data obtained during a deep minimum of solar activity in February 2008 (Carrington rotation CR 2066) to retrieve and analyze the three-dimensional (3D) coronal electron density in the range of heights from 1.5 to 4 Rsun using a tomography method. With this, we qualitatively deduced structures of the coronal magnetic field. The 3D electron density analysis is complemented by the 3D STEREO/EUVI emissivity in the 195 A band obtained by tomography for the same CR. A global 3D MHD model of the solar corona was used to relate the reconstructed 3D density and emissivity to open/closed magnetic field structures. We show that the density maximum locations can serve as an indicator of current sheet position, while the locations of the density gradient maximum can be a reliable indicator of coronal hole boundaries. We find that the magnetic field configuration during CR 2066 has a tendency to become radially open at heliocentric distances greater than 2.5 Rsun. We also find that the potential field model with a fixed source surface (PFSS) is inconsistent with the boundaries between the regions with open and closed magnetic field structures. This indicates that the assumption of the potential nature of the coronal global magnetic field is not satisfied even during the deep solar minimum. Results of our 3D density reconstruction will help to constrain solar coronal field models and test the accuracy of the magnetic field approximations for coronal modeling. △ Less

Submitted 5 May, 2014; originally announced May 2014.

Comments: Published in "Solar Physics"

Validating a Time-Dependent Wave-Turbulence-Driven Model of the Solar Wind

Authors: Roberto Lionello, Marco Velli, Cooper Downs, Jon A. Linker, Zoran Mikić, Andrea Verdini

Abstract: Although the mechanisms responsible for heating the Sun's corona and accelerating the solar wind are still being actively investigated, it is largely accepted that photospheric motions provide the energy source and that the magnetic field must play a key role in the process. \citet{2010ApJ...708L.116V} presented a model for heating and accelerating the solar wind based on the turbulent dissipation… ▽ More Although the mechanisms responsible for heating the Sun's corona and accelerating the solar wind are still being actively investigated, it is largely accepted that photospheric motions provide the energy source and that the magnetic field must play a key role in the process. \citet{2010ApJ...708L.116V} presented a model for heating and accelerating the solar wind based on the turbulent dissipation of Alfvén waves. We first use a time-dependent model of the solar wind to reproduce one of \citeauthor{2010ApJ...708L.116V}'s solutions; then we extend its application to the case when the energy equation includes thermal conduction and radiation losses, and the upper chromosphere is part of the computational domain. Using this model, we explore parameter space and describe the characteristics of a fast-solar-wind solution. We discuss how this formulation may be applied to a 3D MHD model of the coron a and solar wind \citep{2009ApJ...690..902L}. △ Less

Submitted 17 February, 2014; originally announced February 2014.

Distribution of Electric Currents in Solar Active Regions

Authors: Tibor Török, James E. Leake, Viacheslav S. Titov, Vasilis Archontis, Zoran Mikić, Mark G. Linton, Kévin Dalmasse, Guillaume Aulanier, Bernhard Kliem

Abstract: There has been a long-lasting debate on the question of whether or not electric currents in solar active regions are neutralized. That is, whether or not the main (or direct) coronal currents connecting the active region polarities are surrounded by shielding (or return) currents of equal total value and opposite direction. Both theory and observations are not yet fully conclusive regarding this q… ▽ More There has been a long-lasting debate on the question of whether or not electric currents in solar active regions are neutralized. That is, whether or not the main (or direct) coronal currents connecting the active region polarities are surrounded by shielding (or return) currents of equal total value and opposite direction. Both theory and observations are not yet fully conclusive regarding this question, and numerical simulations have, surprisingly, barely been used to address it. Here we quantify the evolution of electric currents during the formation of a bipolar active region by considering a three-dimensional magnetohydrodynamic simulation of the emergence of a sub-photospheric, current-neutralized magnetic flux rope into the solar atmosphere. We find that a strong deviation from current neutralization develops simultaneously with the onset of significant flux emergence into the corona, accompanied by the development of substantial magnetic shear along the active region's polarity inversion line. After the region has formed and flux emergence has ceased, the strong magnetic fields in the region's center are connected solely by direct currents, and the total direct current is several times larger than the total return current. These results suggest that active regions, the main sources of coronal mass ejections and flares, are born with substantial net currents, in agreement with recent observations. Furthermore, they support eruption models that employ pre-eruption magnetic fields containing such currents. △ Less

Submitted 13 January, 2014; originally announced January 2014.

Comments: 6 pages, 5 figures, to appear in Astrophysical Journal Letters

Comparative Study of MHD Modeling of the Background Solar Wind

Authors: C. Gressl, A. M. Veronig, M. Temmer, D. Odstrcil, J. A. Linker, Z. Mikic, P. Riley

Abstract: Knowledge about the background solar wind plays a crucial role in the framework of space weather forecasting. In-situ measurements of the background solar wind are only available for a few points in the heliosphere where spacecraft are located, therefore we have to rely on heliospheric models to derive the distribution of solar wind parameters in interplanetary space. We test the performance of di… ▽ More Knowledge about the background solar wind plays a crucial role in the framework of space weather forecasting. In-situ measurements of the background solar wind are only available for a few points in the heliosphere where spacecraft are located, therefore we have to rely on heliospheric models to derive the distribution of solar wind parameters in interplanetary space. We test the performance of different solar wind models, namely Magnetohydrodynamic Algorithm outside a Sphere/ENLIL (MAS/ENLIL), Wang-Sheeley-Arge/ENLIL (WSA/ENLIL), and MAS/MAS, by comparing model results with in-situ measurements from spacecraft located at 1 AU distance to the Sun (ACE, Wind). To exclude the influence of interplanetary coronal mass ejections (ICMEs), we chose the year 2007 as a time period with low solar activity for our comparison. We found that the general structure of the background solar wind is well reproduced by all models. The best model results were obtained for the parameter solar wind speed. However, the predicted arrival times of high-speed solar wind streams have typical uncertainties of the order of about one day. Comparison of model runs with synoptic magnetic maps from different observatories revealed that the choice of the synoptic map significantly affects the model performance. △ Less

Submitted 4 December, 2013; originally announced December 2013.

Comments: published on-line, Solar Physics, November 2013

Non-neutralized Electric Current Patterns in Solar Active Regions: Origin of the Shear-Generating Lorentz Force

Authors: Manolis K. Georgoulis, Viacheslav S. Titov, Zoran Mikic

Abstract: Using solar vector magnetograms of the highest available spatial resolution and signal-to-noise ratio we perform a detailed study of electric current patterns in two solar active regions: a flaring/eruptive, and a flare-quiet one. We aim to determine whether active regions inject non-neutralized (net) electric currents in the solar atmosphere, responding to a debate initiated nearly two decades ag… ▽ More Using solar vector magnetograms of the highest available spatial resolution and signal-to-noise ratio we perform a detailed study of electric current patterns in two solar active regions: a flaring/eruptive, and a flare-quiet one. We aim to determine whether active regions inject non-neutralized (net) electric currents in the solar atmosphere, responding to a debate initiated nearly two decades ago that remains inconclusive. We find that well-formed, intense magnetic polarity inversion lines (PILs) within active regions are the only photospheric magnetic structures that support significant net current. More intense PILs seem to imply stronger non-neutralized current patterns per polarity. This finding revises previous works that claim frequent injections of intense non-neutralized currents by most active regions appearing in the solar disk but also works that altogether rule out injection of non-neutralized currents. In agreement with previous studies, we also find that magnetically isolated active regions remain globally current-balanced. In addition, we confirm and quantify the preference of a given magnetic polarity to follow a given sense of electric currents, indicating a dominant sense of twist in active regions. This coherence effect is more pronounced in more compact active regions with stronger PILs and must be of sub-photospheric origin. Our results yield a natural explanation of the Lorentz force, invariably generating velocity and magnetic shear along strong PILs, thus setting a physical context for the observed pre-eruption evolution in solar active regions. △ Less

Submitted 10 October, 2012; originally announced October 2012.

Comments: 41 pp, 9 Figures, ApJ, in press - Please notice that the resolution of some figures has been degraded due to size considerations

2010 August 1-2 sympathetic eruptions: I. Magnetic topology of the source-surface background field

Authors: V. S. Titov, Z. Mikic, T. Török, J. A. Linker, O. Panasenco

Abstract: A sequence of apparently coupled eruptions was observed on 2010 August 1-2 by SDO and STEREO. The eruptions were closely synchronized with one another, even though some of them occurred at widely separated locations. In an attempt to identify a plausible reason for such synchronization, we study the large-scale structure of the background magnetic configuration. The coronal field was computed from… ▽ More A sequence of apparently coupled eruptions was observed on 2010 August 1-2 by SDO and STEREO. The eruptions were closely synchronized with one another, even though some of them occurred at widely separated locations. In an attempt to identify a plausible reason for such synchronization, we study the large-scale structure of the background magnetic configuration. The coronal field was computed from the photospheric magnetic field observed at the appropriate time period by using the potential field source-surface model. We investigate the resulting field structure by analyzing the so-called squashing factor calculated at the photospheric and source-surface boundaries, as well as at different coronal cross-sections. Using this information as a guide, we determine the underlying structural skeleton of the configuration, including separatrix and quasi-separatrix surfaces. Our analysis reveals, in particular, several pseudo-streamers in the regions where the eruptions occurred. Of special interest to us are the magnetic null points and separators associated with the pseudo-streamers. We propose that magnetic reconnection triggered along these separators by the first eruption likely played a key role in establishing the assumed link between the sequential eruptions. The present work substantiates our recent simplified magnetohydrodynamic model of sympathetic eruptions and provides a guide for further deeper study of these phenomena. Several important implications of our results for the S-web model of the slow solar wind are also addressed. △ Less

Submitted 25 September, 2012; originally announced September 2012.

Comments: 34 pages, 11 figures, to appear in ApJ in November 2012

Formation of the current sheet in a coronal streamer

Authors: Lucia Abbo, Ester Antonucci, Roberto Lionello, Zoran Mikić, Pete Riley

Abstract: The present work is on the study of a coronal streamer observed in March 2008 at high spectral and spatial resolution by the Ultraviolet Coronagraph Spectrometer (UVCS) onboard SOHO. On the basis of a spectroscopic analysis of the O VI doublet, the solar wind plasma parameters are inferred in the extended corona. The analysis accounts for the coronal magnetic topology, extrapolated through a 3D… ▽ More The present work is on the study of a coronal streamer observed in March 2008 at high spectral and spatial resolution by the Ultraviolet Coronagraph Spectrometer (UVCS) onboard SOHO. On the basis of a spectroscopic analysis of the O VI doublet, the solar wind plasma parameters are inferred in the extended corona. The analysis accounts for the coronal magnetic topology, extrapolated through a 3D magneto-hydrodynamic model. The results of the analysis show indications on the formation of the current sheet, one of the source regions of the slow coronal wind. △ Less

Submitted 11 November, 2011; originally announced November 2011.

Comments: 6 pages, 3 figures, Proceeding of the "International Association of Geomagnetism and Aeronomy (IAGA) 2nd Symposium: Solar Wind - Space Environment Interaction", December 4th-8th, 2009, Cairo, Egypt

A model for magnetically coupled sympathetic eruptions

Authors: T. Torok, O. Panasenco, V. S. Titov, Z. Mikic, K. K. Reeves, M. Velli, J. A. Linker, G. De Toma

Abstract: Sympathetic eruptions on the Sun have been observed for several decades, but the mechanisms by which one eruption can trigger another one remain poorly understood. We present a 3D MHD simulation that suggests two possible magnetic trigger mechanisms for sympathetic eruptions. We consider a configuration that contains two coronal flux ropes located within a pseudo-streamer and one rope located next… ▽ More Sympathetic eruptions on the Sun have been observed for several decades, but the mechanisms by which one eruption can trigger another one remain poorly understood. We present a 3D MHD simulation that suggests two possible magnetic trigger mechanisms for sympathetic eruptions. We consider a configuration that contains two coronal flux ropes located within a pseudo-streamer and one rope located next to it. A sequence of eruptions is initiated by triggering the eruption of the flux rope next to the streamer. The expansion of the rope leads to two consecutive reconnection events, each of which triggers the eruption of a flux rope by removing a sufficient amount of overlying flux. The simulation qualitatively reproduces important aspects of the global sympathetic event on 2010 August 1 and provides a scenario for so-called twin filament eruptions. The suggested mechanisms are applicable also for sympathetic eruptions occurring in other magnetic configurations. △ Less

Submitted 9 August, 2011; originally announced August 2011.

Comments: 6 pages, 4 figures, accepted in ApJ Letters

A Model for the Sources of the Slow Solar Wind

Authors: S. K. Antiochos, Z. Mikić, V. S. Titov, R. Lionello, J. A. Linker

Abstract: Models for the origin of the slow solar wind must account for two seemingly contradictory observations: The slow wind has the composition of the closed field corona, implying that it originates from the continuous opening and closing of flux at the boundary between open and closed field. On the other hand, the slow wind also has large angular width, up to ~ 60{\circ}, suggesting that its source ex… ▽ More Models for the origin of the slow solar wind must account for two seemingly contradictory observations: The slow wind has the composition of the closed field corona, implying that it originates from the continuous opening and closing of flux at the boundary between open and closed field. On the other hand, the slow wind also has large angular width, up to ~ 60{\circ}, suggesting that its source extends far from the open-closed boundary. We propose a model that can explain both observations. The key idea is that the source of the slow wind at the Sun is a network of narrow (possibly singular) open-field corridors that map to a web of separatrices and quasi-separatrix layers in the heliosphere. We compute analytically the topology of an open-field corridor and show that it produces a quasi-separatrix layer in the heliosphere that extends to angles far from the heliospheric current sheet. We then use an MHD code and MDI/SOHO observations of the photospheric magnetic field to calculate numerically, with high spatial resolution, the quasi-steady solar wind and magnetic field for a time period preceding the August 1, 2008 total solar eclipse. Our numerical results imply that, at least for this time period, a web of separatrices (which we term an S-web) forms with sufficient density and extent in the heliosphere to account for the observed properties of the slow wind. We discuss the implications of our S-web model for the structure and dynamics of the corona and heliosphere, and propose further tests of the model. △ Less

Submitted 17 February, 2011; originally announced February 2011.

Uncovering Mechanisms of Coronal Magnetism via Advanced 3D Modeling of Flares and Active Regions

Authors: Gregory Fleishman, Dale Gary, Gelu Nita, David Alexander, Markus Aschwanden, Tim Bastian, Hugh Hudson, Gordon Hurford, Eduard Kontar, Dana Longcope, Zoran Mikic, Marc DeRosa, James Ryan, Stephen White

Abstract: The coming decade will see the routine use of solar data of unprecedented spatial and spectral resolution, time cadence, and completeness. To capitalize on the new (or soon to be available) facilities such as SDO, ATST and FASR, and the challenges they present in the visualization and synthesis of multi-wavelength datasets, we propose that realistic, sophisticated, 3D active region and flare model… ▽ More The coming decade will see the routine use of solar data of unprecedented spatial and spectral resolution, time cadence, and completeness. To capitalize on the new (or soon to be available) facilities such as SDO, ATST and FASR, and the challenges they present in the visualization and synthesis of multi-wavelength datasets, we propose that realistic, sophisticated, 3D active region and flare modeling is timely and critical, and will be a forefront of coronal studies over the coming decade. To make such modeling a reality, a broad, concerted effort is needed to capture the wealth of information resulting from the data, develop a synergistic modeling effort, and generate the necessary visualization, interpretation and model-data comparison tools to accurately extract the key physics. △ Less

Submitted 11 November, 2010; originally announced November 2010.

Comments: 3D Theory and Modeling Concept Paper submitted to 'A Decadal Strategy for Solar and Space Physics (Heliophysics)' Survey. 8 pages

Magnetic Topology of Coronal Hole Linkages

Authors: V. S. Titov, Z. Mikic, J. A. Linker, R. Lionello, S. K. Antiochos

Abstract: In recent work, Antiochos and coworkers argued that the boundary between the open and closed field regions on the Sun can be extremely complex with narrow corridors of open flux connecting seemingly disconnected coronal holes from the main polar holes, and that these corridors may be the sources of the slow solar wind. We examine, in detail, the topology of such magnetic configurations using an an… ▽ More In recent work, Antiochos and coworkers argued that the boundary between the open and closed field regions on the Sun can be extremely complex with narrow corridors of open flux connecting seemingly disconnected coronal holes from the main polar holes, and that these corridors may be the sources of the slow solar wind. We examine, in detail, the topology of such magnetic configurations using an analytical source surface model that allows for analysis of the field with arbitrary resolution. Our analysis reveals three important new results: First, a coronal hole boundary can join stably to the separatrix boundary of a parasitic polarity region. Second, a single parasitic polarity region can produce multiple null points in the corona and, more important, separator lines connecting these points. It is known that such topologies are extremely favorable for magnetic reconnection, because they allow this process to occur over the entire length of the separators rather than being confined to a small region around the nulls. Finally, the coronal holes are not connected by an open-field corridor of finite width, but instead are linked by a singular line that coincides with the separatrix footprint of the parasitic polarity. We investigate how the topological features described above evolve in response to the motion of the parasitic polarity region. The implications of our results for the sources of the slow solar wind and for coronal and heliospheric observations are discussed. △ Less

Submitted 29 October, 2010; originally announced November 2010.

Comments: 32 pages, 10 figures, accepted to ApJ

Characterization of the slow wind in the outer corona

Authors: Lucia Abbo, Ester Antonucci, Zoran Mikić, Jon A. Linker, Pete Riley, Roberto Lionello

Abstract: The study concerns the streamer belt observed at high spectral resolution during the minimum of solar cycle 22 with the Ultraviolet Coronagraph Spectrometer (UVCS) onboard SOHO. On the basis of a spectroscopic analysis of the O VI doublet, the solar wind plasma parameters are inferred in the extended corona. The analysis accounts for the coronal magnetic topology, extrapolated through a 3D magneto… ▽ More The study concerns the streamer belt observed at high spectral resolution during the minimum of solar cycle 22 with the Ultraviolet Coronagraph Spectrometer (UVCS) onboard SOHO. On the basis of a spectroscopic analysis of the O VI doublet, the solar wind plasma parameters are inferred in the extended corona. The analysis accounts for the coronal magnetic topology, extrapolated through a 3D magneto-hydrodynamic model, in order to define the streamer boundary and to analyse the edges of coronal holes. The results of the analysis allow an accurate identification of the source regions of the slow coronal wind that are confirmed to be along the streamer boundary in the open magnetic field region. △ Less

Submitted 8 March, 2011; v1 submitted 26 August, 2010; originally announced August 2010.

Comments: 5 figures, work presented with an oral presentation on 37th COSPAR Scientific Assembly, 13 - 20 July 2008, Montreal, Canada

Coronal mass ejection initiation: On the nature of the Flux Cancellation Model

Authors: Tahar Amari, Jean-Jacques Aly, Zoran Mikic, Jon A. Linker

Abstract: We consider a three-dimensional bipolar force-free magnetic field with non zero magnetic helicity, occupying a half-space, and study the problem of its evolution driven by an imposed photospheric flux decrease. For this specific setting of the Flux Cancellation Model describing coronal mass ejections occuring in active regions, we address the issues of the physical meaning of flux decrease, of the… ▽ More We consider a three-dimensional bipolar force-free magnetic field with non zero magnetic helicity, occupying a half-space, and study the problem of its evolution driven by an imposed photospheric flux decrease. For this specific setting of the Flux Cancellation Model describing coronal mass ejections occuring in active regions, we address the issues of the physical meaning of flux decrease, of the influence on field evolution of the size of the domain over which this decrease is imposed, and of the existence of an energetic criterion characterizing the possible onset of disruption of the configuration. We show that: (1) The imposed flux disappearance can be interpreted in terms of transport of positive and negative fluxes towards the inversion line, where they get annihilated. (2) For the particular case actually computed, in which the initial state is quite sheared, the formation of a twisted flux rope and the subsequent global disruption of the configuration are obtained when the flux has decreased by only a modest amount over a limited part of the whole active region. (3) The disruption is produced when the magnetic energy becomes of the order of the decreasing energy of a semi-open field, and then before reaching the energy of the associated fully open field. This suggests that the mechanism leading to the disruption is nonequilibrium as in the case where flux is imposed to decrease over the whole region. △ Less

Submitted 25 May, 2010; originally announced May 2010.

Comments: In press in ApJ Letters

Low-Latitude Coronal Holes at the Minimum of the 23rd Solar Cycle

Authors: V. Abramenko, V. Yurchyshyn, J. Linker, Z. Mikic, J. Luhmann, C. Lee

Abstract: Low and mid-latitude coronal holes (CHs) observed on the Sun during the current solar activity minimum (from September 21, 2006, Carrington rotation (CR) 2048, until June 26, 2009 (CR 2084)) were analyzed using {\it SOHO}/EIT and STEREO-A SECCHI EUVI data. From both the observations and Potential Field Source Surface (PFSS) modeling, we find that the area occupied by CHs inside a belt of… ▽ More Low and mid-latitude coronal holes (CHs) observed on the Sun during the current solar activity minimum (from September 21, 2006, Carrington rotation (CR) 2048, until June 26, 2009 (CR 2084)) were analyzed using {\it SOHO}/EIT and STEREO-A SECCHI EUVI data. From both the observations and Potential Field Source Surface (PFSS) modeling, we find that the area occupied by CHs inside a belt of $\pm 40^\circ$ around the solar equator is larger in the current 2007 solar minimum relative to the similar phase of the previous 1996 solar minimum. The enhanced CH area is related to a recurrent appearance of five persistent CHs, which survived during 7-27 solar rotations. Three of the CHs are of positive magnetic polarity and two are negative. The most long-lived CH was being formed during 2 days and existed for 27 rotations. This CH was associated with fast solar wind at 1 AU of approximately 620$\pm 40$ km s$^{-1}$. The 3D MHD modeling for this time period shows an open field structure above this CH. We conclude that the global magnetic field of the Sun possessed a multi-pole structure during this time period. Calculation of the harmonic power spectrum of the solar magnetic field demonstrates a greater prevalence of multi-pole components over the dipole component in the 2007 solar minimum compared to the 1996 solar minimum. The unusual large separation between the dipole and multi-pole components is due to the very low magnitude of the dipole component, which is three times lower than that in the previous 1996 solar minimum. △ Less

Submitted 8 February, 2010; originally announced February 2010.

Comments: 14 pages, 7 figures

Slip-Squashing Factors as a Measure of Three-Dimensional Magnetic Reconnection

Authors: V. S. Titov, T. G. Forbes, E. R. Priest, Z. Mikic, J. A. Linker

Abstract: A general method for describing magnetic reconnection in arbitrary three-dimensional magnetic configurations is proposed. The method is based on the field-line map** technique previously used only for the analysis of magnetic structure at a given time. This technique is extended here so as to analyze the evolution of magnetic structure. Such a generalization is made with the help of new dimens… ▽ More A general method for describing magnetic reconnection in arbitrary three-dimensional magnetic configurations is proposed. The method is based on the field-line map** technique previously used only for the analysis of magnetic structure at a given time. This technique is extended here so as to analyze the evolution of magnetic structure. Such a generalization is made with the help of new dimensionless quantities called "slip-squashing factors". Their large values define the surfaces that border the reconnected or to-be-reconnected magnetic flux tubes for a given period of time during the magnetic evolution. The proposed method is universal, since it assumes only that the time sequence of evolving magnetic field and the tangential boundary flows are known. The application of the method is illustrated for simple examples, one of which was considered previously by Hesse and coworkers in the framework of the general magnetic reconnection theory. The examples help us to compare these two approaches; they reveal also that, just as for magnetic null points, hyperbolic and cusp minimum points of a magnetic field may serve as favorable sites for magnetic reconnection. The new method admits a straightforward numerical implementation and provides a powerful tool for the diagnostics of magnetic reconnection in numerical models of solar-flare-like phenomena in space and laboratory plasmas. △ Less

Submitted 23 February, 2009; v1 submitted 17 July, 2008; originally announced July 2008.

Comments: 39 pages, 9 figures, corrected typos, to appear in ApJ, March 2009

Journal ref: Astrophys.J.693:1029-1044,2009

Strongly compressible current sheets under gravitation

Authors: S. I. Vainshtein, Z. Mikic, R. Rosner, R. Z. Sagdeev

Abstract: Many stormy events in astrophysics occur due to the sudden magnetic energy release. This is possible if a magnetic configuration abruptly changes its topology, an event usually referred to as magnetic reconnection. It is known that pure Ohmic decay is inefficient, occurring during cosmological times (due to the huge characteristic scales $L$). It is recognized that the presence of current sheets… ▽ More Many stormy events in astrophysics occur due to the sudden magnetic energy release. This is possible if a magnetic configuration abruptly changes its topology, an event usually referred to as magnetic reconnection. It is known that pure Ohmic decay is inefficient, occurring during cosmological times (due to the huge characteristic scales $L$). It is recognized that the presence of current sheets speeds up the process, but still insufficiently$^{1,2,3,4,5}$. We show that, in highly compressible and substantially gravitational media, the reconnection is fast enough to account for stormy events. Thus, highly compressible situations offer exiting opportunities in explanations of violent events, although full-scale compressible and gravitational simulations proved to be quite challenging. △ Less

Submitted 23 April, 2008; originally announced April 2008.

Comments: 10 pages, 4 figures

May 12 1997 Cme Event: I. a Simplified Model of the Pre-Eruptive Magnetic Structure

Authors: V. S. Titov, Z. Mikic, J. A. Linker, R. Lionello

Abstract: A simple model of the coronal magnetic field prior to the CME eruption on May 12 1997 is developed. First, the magnetic field is constructed by superimposing a large-scale background field and a localized bipolar field to model the active region (AR) in the current-free approximation. Second, this potential configuration is quasi-statically sheared by photospheric vortex motions applied to two f… ▽ More A simple model of the coronal magnetic field prior to the CME eruption on May 12 1997 is developed. First, the magnetic field is constructed by superimposing a large-scale background field and a localized bipolar field to model the active region (AR) in the current-free approximation. Second, this potential configuration is quasi-statically sheared by photospheric vortex motions applied to two flux concentrations of the AR. Third, the resulting force-free field is then evolved by canceling the photospheric magnetic flux with the help of an appropriate tangential electric field applied to the central part of the AR. To understand the structure of the modeled configuration, we use the field line map** technique by generalizing it to spherical geometry. It is demonstrated that the initial potential configuration contains a hyperbolic flux tube (HFT) which is a union of two intersecting quasi-separatrix layers. This HFT provides a partition of the closed magnetic flux between the AR and the global solar magnetic field. The vortex motions applied to the AR interlock the field lines in the coronal volume to form additionally two new HFTs pinched into thin current layers. Reconnection in these current layers helps to redistribute the magnetic flux and current within the AR in the flux-cancellation phase. In this phase, a magnetic flux rope is formed together with a bald patch separatrix surface wrap** around the rope. Other important implications of the identified structural features of the modeled configuration are also discussed. △ Less

Submitted 23 November, 2007; originally announced November 2007.

Comments: 25 pages, 11 figures, to appear in ApJ 2008

Journal ref: 2008, Astrophys. J., vol. 675, No. 2, pp. 1614-1628

Compression of the current sheet and its impact into the reconnection rate

Authors: S. I. Vainshtein, Z. Mikić, R. Sagdeev

Abstract: Numerical simulations of strongly compressible MHD corresponding to a stellar atmosphere with substantial gravity and near force-free magnetic fields show that the current sheet collapses (its width decreasing substantially). As a result, the reconnection rate increases dramatically. Numerical simulations of strongly compressible MHD corresponding to a stellar atmosphere with substantial gravity and near force-free magnetic fields show that the current sheet collapses (its width decreasing substantially). As a result, the reconnection rate increases dramatically. △ Less

Submitted 14 November, 2007; v1 submitted 11 November, 2007; originally announced November 2007.

Comments: 24 pages 10 figures, typos corrected

Structure and Dynamics of the Sun's Open Magnetic Field

Authors: S. K. Antiochos, C. R. DeVore, J. T. Karpen, Z. Mikic

Abstract: The solar magnetic field is the primary agent that drives solar activity and couples the Sun to the Heliosphere. Although the details of this coupling depend on the quantitative properties of the field, many important aspects of the corona - solar wind connection can be understood by considering only the general topological properties of those regions on the Sun where the field extends from the… ▽ More The solar magnetic field is the primary agent that drives solar activity and couples the Sun to the Heliosphere. Although the details of this coupling depend on the quantitative properties of the field, many important aspects of the corona - solar wind connection can be understood by considering only the general topological properties of those regions on the Sun where the field extends from the photosphere out to interplanetary space, the so-called open field regions that are usually observed as coronal holes. From the simple assumptions that underlie the standard quasi-steady corona-wind theoretical models, and that are likely to hold for the Sun, as well, we derive two conjectures on the possible structure and dynamics of coronal holes: (1) Coronal holes are unique in that every unipolar region on the photosphere can contain at most one coronal hole. (2) Coronal holes of nested polarity regions must themselves be nested. Magnetic reconnection plays the central role in enforcing these constraints on the field topology. From these conjectures we derive additional properties for the topology of open field regions, and propose several observational predictions for both the slowly varying and transient corona/solar wind. △ Less

Submitted 30 May, 2007; originally announced May 2007.

Comments: 26 pages, 6 figures

Evidence for topological nonequilibrium in magnetic configurations

Authors: S. I. Vainshtein, Z. Mikić, R. Rosner, J. A. Linker

Abstract: We use direct numerical simulations to study the evolution, or relaxation, of magnetic configurations to an equilibrium state. We use the full single-fluid equations of motion for a magnetized, non-resistive, but viscous fluid; and a Lagrangian approach is used to obtain exact solutions for the magnetic field. As a result, the topology of the magnetic field remains unchanged, which makes it poss… ▽ More We use direct numerical simulations to study the evolution, or relaxation, of magnetic configurations to an equilibrium state. We use the full single-fluid equations of motion for a magnetized, non-resistive, but viscous fluid; and a Lagrangian approach is used to obtain exact solutions for the magnetic field. As a result, the topology of the magnetic field remains unchanged, which makes it possible to study the case of topological nonequilibrium. We find two cases for which such nonequilibrium appears, indicating that these configurations may develop singular current sheets. △ Less

Submitted 18 March, 2000; originally announced March 2000.

Comments: 10 pages, 5 figures