-
Gas-to-nanotextile: high-performance materials from floating 1D nanoparticles
Authors:
Isabel Gómez-Palos,
Miguel Vazquez-Pufleau,
Richard S Schäufele,
Anastasiia Mikhalchan,
Afshin Pendashteh,
Álvaro Ridruejo,
Juan J. Vilatela
Abstract:
Suspended in the gas phase, 1D inorganic nanoparticles (nanotubes and nanowires) grow to hundreds of microns in a second and can be thus directly assembled into freestanding network materials. The corresponding process continuously transforms gas precursors into aerosols into aerogels into macroscopic nanotextiles. By enabling the assembly of very high aspect ratio nanoparticles, this processing r…
▽ More
Suspended in the gas phase, 1D inorganic nanoparticles (nanotubes and nanowires) grow to hundreds of microns in a second and can be thus directly assembled into freestanding network materials. The corresponding process continuously transforms gas precursors into aerosols into aerogels into macroscopic nanotextiles. By enabling the assembly of very high aspect ratio nanoparticles, this processing route has translated into high-performance structural materials, transparent conductors and battery anodes, amongst other embodiments. This paper reviews progress in the application of such manufacturing process to nanotubes and nanowires. It analyses 1D nanoparticle growth through floating catalyst chemical vapour deposition (FCCVD), in terms of reaction selectivity, scalability and its inherently ultra-fast growth rates (107-108 atoms per second) up to 1000 times faster than for substrate CVD. We summarise emerging descriptions of the formation of aerogels through percolation theory and multi-scale models for the collision and aggregation of 1D nanoparticles. The paper shows that macroscopic ensembles of 1D nanoparticles resemble textiles in their porous network structure, high flexibility and damage-tolerance. Their bulk properties depend strongly on inter-particle properties and are dominated by alignment and volume fraction. Selected examples of nanotextiles that surpass granular and monolithic materials include structural fibres with polymer-like toughness, transparent conductors, and slurry-free composite electrodes for energy storage.
△ Less
Submitted 10 April, 2023;
originally announced April 2023.
-
Composite fabrics of conformal MoS2 grown on CNT fibers: tough battery anodes without metals or binders
Authors:
Moumita Rana,
Nicola Boaretto,
Anastasiia Mikhalchan,
Maria Vila Santos,
Rebeca Marcilla,
Juan Jose Vilatela
Abstract:
In the quest to increase battery performance, nanostructuring battery electrodes gives access to architectures with electrical conductivity and solid-state diffusion regimes not accessible with traditional electrodes based on aggregated spherical microparticles, while often also contributing to the cyclability of otherwise unstable active materials. This work describes electrodes where active mate…
▽ More
In the quest to increase battery performance, nanostructuring battery electrodes gives access to architectures with electrical conductivity and solid-state diffusion regimes not accessible with traditional electrodes based on aggregated spherical microparticles, while often also contributing to the cyclability of otherwise unstable active materials. This work describes electrodes where active material and current collector are formed as a single nanostructured composite network, consisting of macroscopic fabrics of carbon nanotube fibers covered with conformal MoS2 grown preferentially aligned over the graphitic layers, without metallic current collector or any conductive or polymeric additives. The composite fabric of CNTF/MoS2 retain high toughness and show out-of-plane electrical conductivity as high as 1.2 S/m, above the threshold to avoid electrical transport-limited performance of electrodes (1 S/m), and above control nanocomposite LIB electrodes (0.1 S/m) produced from dispersed nanocarbons. Cycled against Li, they show specific capacity as high as 0.7 Ah/g along with appreciable rate capability and cycling stability in low (108% capacity retention after 50 cycles at 0.1 A/g) as well as high current density (89 % capacity retention after 250 cycles at 1 A/g). The composite fabrics are flexible, with high tensile toughness up to 0.7 J/g, over two orders of magnitude higher than conventional electrodes or regular MoS2 material, and full-electrode capacity above state of the art at different current densities.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Identification of Collapsed Carbon Nanotubes in High-Strength Fibres Spun from Compositionally Polydisperse Aerogels
Authors:
Maria Vila,
Seungki Hong,
Seunggyu Park,
Anastasiia Mikhalchan,
Bon-Cheol Ku,
Jun Yeon Hwang,
Juan J. Vilatela
Abstract:
Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer by shear makes collapsed CNTs ideal building blocks in macroscopic fibers of CNTs with high-performance longitudinal properties, particularly high tensile prope…
▽ More
Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer by shear makes collapsed CNTs ideal building blocks in macroscopic fibers of CNTs with high-performance longitudinal properties, particularly high tensile properties as reinforcing fibres. This work introduces cross-sectional transmission electron microscopy of FIB-milled samples as a way to univocally identify collapsed CNTs and to determine the full population of different CNTs in macroscopic fibers produced by spinning from floating catalyst chemical vapour deposition. We show that close proximity in bundles is a major driver for collapse and that CNT stoutness (number of layers/diameter), which dominates the collapse onset, is controlled by the growth promotor. Despite differences in decomposition route, different C precursors lead to similar distributions of the ratio layers/diameter. The synthesis conditions in this study give a maximum fraction of collapsed CNTs of 70$\%$ when using selenium as promotor, corresponding to an average of $0.25 layer/nm$.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Simultaneous improvements in conversion and properties of molecularly controlled CNT fibres
Authors:
Anastasiia Mikhalchan,
María Vila,
Luis Arévalo,
Juan J. Vilatela
Abstract:
Fibres of ultralong and aligned carbon nanotubes (CNT) have axial properties above reference engineering materials, proving to be exceptional materials for application in structural composites, energy storage and other devices. For CNT fibres produced by direct spinning from floating catalyst chemical vapor deposition (FCCVD), a scaled-up method, the challenge is to simultaneously achieve high pro…
▽ More
Fibres of ultralong and aligned carbon nanotubes (CNT) have axial properties above reference engineering materials, proving to be exceptional materials for application in structural composites, energy storage and other devices. For CNT fibres produced by direct spinning from floating catalyst chemical vapor deposition (FCCVD), a scaled-up method, the challenge is to simultaneously achieve high process conversion and high-performance properties. This work presents a parametric study of the CNT fibre spinning process by establishing the relation between synthesis conditions, molecular composition (i.e. CNT type), fibre mechanical and electrical properties, and conversion. It demonstrates tensile properties (strength 2.1 N/tex, modulus 107 N/tex) above some carbon fibres, combined with carbon conversion about 5%, significantly above literature on similar materials. The combined improvement in conversion and properties is obtained by conducing the reaction at high temperature (1300 °C), using toluene as a carbon source, and through adjustment of the promotor to carbon ratio (S/C) to favor formation of few-layer, collapsed CNTs that maximize packing at relatively high conversions. Lower S/C ratios produce low-defect single-wall CNT, but weaker fibres. An increase in electrical conductivity to 3 x 10^5 S/m is also observed, with the data suggesting a correlation with longitudinal modulus.
△ Less
Submitted 6 May, 2021;
originally announced May 2021.
-
Understanding cooperative loading in carbon nanotube fibres through in-situ structural studies during stretching
Authors:
J. C. Fernández-Toribio,
A. Mikhalchan,
C. Santos,
A. Ridruejo,
J. J. Vilatela
Abstract:
Carbon nanotube (CNT) fibres are firmly established as a new high-performance fibre, but their tensile mechanical properties remain a relatively small fraction of those of the constituent CNTs. Clear structure-property relations and accurate mechanical models are pressing requirements to bridge this gap. In this work we analyse the structural evolution and molecular stress transfer in CNT fibres b…
▽ More
Carbon nanotube (CNT) fibres are firmly established as a new high-performance fibre, but their tensile mechanical properties remain a relatively small fraction of those of the constituent CNTs. Clear structure-property relations and accurate mechanical models are pressing requirements to bridge this gap. In this work we analyse the structural evolution and molecular stress transfer in CNT fibres by performing in-situ synchrotron wide- and small-angle X-ray scattering and Raman spectroscopy during tensile deformation. The results show that CNT fibres can be accurately described as network of bundles that slide progressively according to the initial orientation distribution function of the material following a Weibull distribution. This model decouples the effects of CNT alignment and degree of cooperative loading, as demonstrated for fibres produced at different draw ratios. It also helps explain the unusually high toughness (fracture energy) of CNT fibres produced by the direct spinning method, a key property for impact resistance in structural materials, for example.
△ Less
Submitted 4 August, 2020; v1 submitted 7 May, 2020;
originally announced May 2020.
-
A Perspective on High-performance CNT fibres for Structural Composites
Authors:
A. Mikhalchan,
J. J. Vilatela
Abstract:
This review summarizes progress on structural composites with carbon nanotube fibres. It starts by analyzing their development towards a macroscopic ensemble of elongated and aligned crystalline domains, alongside the evolution of the structure of traditional high-performance fibres. Literature on tensile properties suggests that there are two emerging grades: highly aligned fibres spun from liqui…
▽ More
This review summarizes progress on structural composites with carbon nanotube fibres. It starts by analyzing their development towards a macroscopic ensemble of elongated and aligned crystalline domains, alongside the evolution of the structure of traditional high-performance fibres. Literature on tensile properties suggests that there are two emerging grades: highly aligned fibres spun from liquid crystalline solutions, with high modulus and strength, and spun from aerogels of ultra long-nanotubes, combining high strength and fracture energy. The fabrication of large unidirectional fabrics with similar properties as the fibres is presently a challenge, which CNT alignment remaining a key factor. A promising approach is to produce fabrics directly from aerogel filaments without having to densify and handle individual CNT fibres. Structural composites of CNT fibres have reached high longitudinal properties, however, on relatively small samples. In general, there is need to demonstrate fabrication of large CNT fibre laminate composites using standard fabrication routes and to study longitudinal and transverse mechanical properties in tension and compression. Complementary areas of development are interlaminar reinforcement with CNT fabric interleaves, and multifunctional structural composites with energy storage or harvesting functions.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
A Route to High-Toughness Battery Electrodes
Authors:
N. Boaretto,
J. Almenara,
A. Mikhalchan,
R. Marcilla,
J. J. Vilatela
Abstract:
There is increasing interest in materials that combine energy-storing functions with augmented mechanical properties, ranging from flexibility in bending to stretchability to structural properties. In the case of lithium-ion batteries, these mechanical functions could enable their integration in emerging technologies such as wearable, free-form electronics and ultimately as structural elements, fo…
▽ More
There is increasing interest in materials that combine energy-storing functions with augmented mechanical properties, ranging from flexibility in bending to stretchability to structural properties. In the case of lithium-ion batteries, these mechanical functions could enable their integration in emerging technologies such as wearable, free-form electronics and ultimately as structural elements, for example, in transport applications. This work presents a method to produce flexible LiFePO4 LFP electrodes with an extraordinary combination of electrochemical and mechanical performance. Such electrodes exhibit an exceptionally high specific toughness, combined with superior rate capability and energy density, with respect to reference electrodes with typical metallic current collectors. These properties are a result of the strong adhesion of the active material particles to the high surface area carbon nanotube fiber fabric, used as a lightweight, tough, and highly conducting current collector. This strong adherence minimizes electrical resistance, mitigates interfacial failure, and increases ductility through heterogeneous strain after cohesive failure of the inorganic phase. As a result, these electrodes can withstand large deformations before fracture, and, even after fracture, they retain excellent electrochemical performance, approximately double that of unstretched, Al-supported LFP electrodes with equivalent loading.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
