Showing 1–37 of 37 results for author: Mihalkovic, M

Simulated structure and thermodynamics of decagonal Al-Co-Cu quasicrystals

Authors: Y. Huang, M. Widom, M. Mihalkovič

Abstract: Atomic structures of Al-Co-Cu decagonal quasicrystals (QCs) are investigated using empirical oscillating pair potentials (EOPP) in molecular dynamic (MD) simulations that we enhance by Monte Carlo (MC) swap** of chemical species and replica exchange. Predicted structures exhibit planar decagonal tilin g patterns and are periodic along the perpendicular direction. We then recalculate the energies… ▽ More Atomic structures of Al-Co-Cu decagonal quasicrystals (QCs) are investigated using empirical oscillating pair potentials (EOPP) in molecular dynamic (MD) simulations that we enhance by Monte Carlo (MC) swap** of chemical species and replica exchange. Predicted structures exhibit planar decagonal tilin g patterns and are periodic along the perpendicular direction. We then recalculate the energies of promising structures using first-principles density functional theory (DFT), along with energies of competing phases. We find that our $τ$-inflated sequence of QC approximants are energetically unstable a t low temperature by at least 3 meV/atom. Extending our study to finite temperatures by calculating harmonic vibrational entropy, as well as anharmonic contributions that include chemical species swaps and tile flips, our results suggest that the quasicrystal phase is entropically stabilized at temperatur es in the range 600-800K and above. It decomposes into ordinary (though complex) crystal phases at low temperatures, including a partially disordered B2-type phase. We discuss the influence of density and composition on QC phase stability; we compare the structural differences between Co-rich and Cu-rich quasicrystals; and we analyze the role of entropy in stabilizing the quasicrystal, concluding with a discussion of the possible existence of "high entropy" quasicrystals. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Quasicrystal structure prediction: A review

Authors: Michael Widom, Marek Mihalkovic

Abstract: Predicting quasicrystal structures is a multifaceted problem that can involve predicting a previously unknown phase, predicting the structure of an experimentally observed phase, or predicting the thermodynamic stability of a given structure. We survey the history and current state of these prediction efforts with a focus on methods that have improved our understanding of the structure and stabili… ▽ More Predicting quasicrystal structures is a multifaceted problem that can involve predicting a previously unknown phase, predicting the structure of an experimentally observed phase, or predicting the thermodynamic stability of a given structure. We survey the history and current state of these prediction efforts with a focus on methods that have improved our understanding of the structure and stability of known metallic quasicrystal phases. Advances in the structural modeling of quasicrystals, along with first principles total energy calculation and statistical mechanical methods that enable the calculation of quasicrystal thermodynamic stability, are illustrated by means of cited examples of recent work. △ Less

Submitted 17 August, 2023; originally announced August 2023.

Formation enthalpies of Al-Mn-Pd and the structure of the $i$-AlMnPd quasicrystal

Authors: Marek Mihalkovic, Michael Widom

Abstract: This paper reports formation enthalpies of phases in the Al-Mn-Pd ternary alloy system as calculated from first principles using electronic density functional theory. We consider all crystal structures as reported in the assessed phase diagrams of the ternary and its binary alloy subsystems (Al-Mn, Al-Pd, and Mn-Pd), as well as additional reported or hypothetical structures. Icosahedral and decago… ▽ More This paper reports formation enthalpies of phases in the Al-Mn-Pd ternary alloy system as calculated from first principles using electronic density functional theory. We consider all crystal structures as reported in the assessed phase diagrams of the ternary and its binary alloy subsystems (Al-Mn, Al-Pd, and Mn-Pd), as well as additional reported or hypothetical structures. Icosahedral and decagonal quasicrystalline approximants are among the structures that we predict to be stable, or nearly so. Our results suggest the need for careful experimental reexamination of phase stability in each of the alloy systems, in tandem with further efforts to refine crystallographic and ab-initio structures. △ Less

Submitted 24 February, 2023; v1 submitted 23 February, 2023; originally announced February 2023.

Decagonal Sn clathrate on $d$-Al-Ni-Co

Authors: Vipin Kumar Singh, Eva Pospisilova, Marek Mihalkovič, Marian Krajčí, Pramod Bhakuni, Shuvam Sarkar, Katariina Pussi, D. L. Schlagel, T. A. Lograsso, Paul C. Canfield, Sudipta Roy Barman

Abstract: Decagonal quasiperiodic ordering of Sn thin film on $d$-Al-Ni-Co, is shown based on scanning tunneling microscopy (STM), low-energy electron diffraction and density functional theory (DFT). Interestingly, the decagonal structural correlations are partially retained up to a large film thickness of 10 nm grown at a 165$\pm$10 K. The nucleation centers called 'Sn white flowers' identified by STM at s… ▽ More Decagonal quasiperiodic ordering of Sn thin film on $d$-Al-Ni-Co, is shown based on scanning tunneling microscopy (STM), low-energy electron diffraction and density functional theory (DFT). Interestingly, the decagonal structural correlations are partially retained up to a large film thickness of 10 nm grown at a 165$\pm$10 K. The nucleation centers called 'Sn white flowers' identified by STM at submonolayer thickness are recognized as valid patches of the decagonal clathrate structure with low adsorption energies. Due to the excellent lattice matching (to within 1%) between columns of Sn dodecahedra in the clathrate structure and pentagonal motifs at the $d$-Al-Ni-Co surface, the interfacial energy favors clathrate over the competing Sn crystalline forms. DFT study of the Sn/Al-Ni-Co composite model shows good mechanical stability, as shown by the work of separation of Sn from Al-Ni-Co slab that is comparable to clathrate self-separation energy. The relaxed surface terminations of the R$_2$T$_4$ clathrate approximant are in self-similarity correspondence with the motifs observed in the STM images from monolayer to thickest Sn film. △ Less

Submitted 19 December, 2022; originally announced December 2022.

Comments: Phys. Rev. B (in press) with 17 figures and 2 Tables in the main text. The supplementary material contains 9 figures, 3 Tables, one note, VASP CONTCAR files, and LEED video files

Journal ref: Phys. Rev. B, 107, 045410 (2023)

Ordered ground state configurations of the asymmetric Wigner bilayer system -- revisited: an unsupervised clustering algorithm analysis

Authors: Benedikt Hartl, Marek Mihalkovič, Ladislav Šamaj, Martial Mazars, Emmanuel Trizac, Gerhard Kahl

Abstract: We have re-analysed the rich plethora of ground state configurations of the asymmetric Wigner bilayer system that we had recently published in a related diagram of states [M. Antlanger \textit{et al.}, Phys. Rev. Lett. \textbf{117}, 118002 (2016)], comprising roughly 60~000 state points in the phase space spanned by the distance between the plates and the charge asymmetry parameter of the system.… ▽ More We have re-analysed the rich plethora of ground state configurations of the asymmetric Wigner bilayer system that we had recently published in a related diagram of states [M. Antlanger \textit{et al.}, Phys. Rev. Lett. \textbf{117}, 118002 (2016)], comprising roughly 60~000 state points in the phase space spanned by the distance between the plates and the charge asymmetry parameter of the system. In contrast to this preceding contribution where the classification of the emerging structures was carried out ``by hand'', we have used this time machine learning concepts, notably based on a principal component analysis and a $k$-means clustering approach: using a 30-dimensional feature vector for each emerging structure (containing relevant information, such as the composition of the configuration as well as the most relevant order parameters) we were able to re-analyse these ground state configurations in a considerably more systematic and comprehensive manner than we could possibly do in the previously published classification scheme. Indeed we were now able to identify new structures in previously unclassified regions of the parameter space and could considerably refine the previous classification scheme, identifying thereby a rich wealth of new emerging ground state configurations. Thorough consistency checks confirm the validity of the newly defined diagram of states. △ Less

Submitted 19 December, 2022; v1 submitted 9 November, 2022; originally announced November 2022.

Journal ref: J. Chem. Phys. 159, 204112 (2023)

Planar defect in approximant: the case of Cu-Al-Sc alloy

Authors: Tsutomu Ishimasa, Yeong-Gi So, Marek Mihalkovič

Abstract: The {110} planar defect formed in the Cu-Al-Sc 1/1 approximant has been studied by means of electron microscopy and 6-dimensional analysis. As the displacement vector of the planar defect, 1/2 <τ, 1/τ, 0> has been proposed. Here τ denotes the golden ratio. This vector corresponds to a 6-dimensional translation of type [111000] and also to the c-linkage of Tsai-type clusters. An atomic structure mo… ▽ More The {110} planar defect formed in the Cu-Al-Sc 1/1 approximant has been studied by means of electron microscopy and 6-dimensional analysis. As the displacement vector of the planar defect, 1/2 <τ, 1/τ, 0> has been proposed. Here τ denotes the golden ratio. This vector corresponds to a 6-dimensional translation of type [111000] and also to the c-linkage of Tsai-type clusters. An atomic structure model of the planar defect has been constructed referring to the structural properties of the regular 1/1 approximant; namely truncated triacontahedron framework and embedded clusters. This structural model was validated by the agreement between the observed and simulated HAADF-STEM images. Models of the intersection of two planar defects and the triple point, where three planar defects intersect, were also proposed. All local structures formed at these defects are understood by the concept of so-called canonical cell tiling. △ Less

Submitted 18 August, 2021; v1 submitted 6 August, 2021; originally announced August 2021.

Comments: 31 pages including 4 tables and 14 figures

Spontaneous formation of thermodynamically stable Al--Cu--Fe icosahedral quasicrystal from realistic atomistic simulations

Authors: Marek Mihalkovic, Michael Widom

Abstract: Icosahedral quasicrystals spontaneously form from the melt in simulations of Al--Cu--Fe alloys. We model the interatomic interactions using oscillating pair potentials tuned to the specific alloy system based on a database of density functional theory (DFT)-derived energies and forces. Favored interatomic separations align with the geometry of icosahedral motifs that overlap to create face-centere… ▽ More Icosahedral quasicrystals spontaneously form from the melt in simulations of Al--Cu--Fe alloys. We model the interatomic interactions using oscillating pair potentials tuned to the specific alloy system based on a database of density functional theory (DFT)-derived energies and forces. Favored interatomic separations align with the geometry of icosahedral motifs that overlap to create face-centered icosahedral order on a hierarchy of length scales. Molecular dynamics simulations, supplemented with Monte Carlo steps to swap chemical species, efficiently sample the configuration space of our models, which reach up to 9846 atoms. Exchanging temperatures of independent trajectories (replica exchange) allows us to achieve thermal equilibrium at low temperatures. By optimizing structure and composition we create structures whose DFT energies reach to within $\sim$2 meV/atom of the energies of competing crystal phases. Free energies obtained by adding contributions due to harmonic and anharmonic vibrations, chemical substitution disorder, phasons, and electronic excitations, show that the quasicrystal becomes stable against competing phases at temperatures above 600K. The average structure can be described succinctly as a cut through atomic surfaces in six-dimensional space that reveal specific patterns of preferred chemical occupancy. Atomic surface regions of mixed chemical occupation demonstrate the proliferation of phason fluctuations, which can be observed in real space through the formation, dissolution and reformation of large scale icosahedral motifs -- a picture that is hidden from diffraction refinements due to averaging over the disorder and consequent loss of information concerning occupancy correlations. △ Less

Submitted 9 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. Research 2, 013196 (2020)

Interpretation of some Yb-based valence-fluctuating crystals as approximants to a dodecagonal quasicrystal

Authors: Tsutomu Ishimasa, Marek Mihalkovič, Kazuhiko Deguchi, Noriaki K. Sato, Marc de Boissieu

Abstract: The hexagonal ZrNiAl-type (space group: P-62m) and the tetragonal Mo2FeB2-type (space group: P4/mbm) structures, which are frequently formed in the same Yb-based alloys and exhibit physical properties related to valence-fluctuation, can be regarded as approximants of a hypothetical dodecagonal quasicrystal. Using Pd-Sn-Yb system as an example, a model of quasicrystal structure has been constructed… ▽ More The hexagonal ZrNiAl-type (space group: P-62m) and the tetragonal Mo2FeB2-type (space group: P4/mbm) structures, which are frequently formed in the same Yb-based alloys and exhibit physical properties related to valence-fluctuation, can be regarded as approximants of a hypothetical dodecagonal quasicrystal. Using Pd-Sn-Yb system as an example, a model of quasicrystal structure has been constructed, of which 5-dimensional crystal (space group: P12/mmm, aDD=5.66 Å and c=3.72 Å) consists of four types of acceptance regions located at the following crystallographic sites; Yb [00000], Pd[1/3 0 1/3 0 1/2], Pd[1/3 1/3 1/3 1/3 0] and Sn[1/2 00 1/2 1/2]. In the 3-dimensional space, the quasicrystal is composed of three types of columns, of which c-projections correspond to a square, an equilateral triangle and a 3-fold hexagon. They are fragments of two known crystals, the hexagonal α-YbPdSn and the tetragonal Yb2Pd2Sn structures. The model of the hypothetical quasicrystal may be applicable as a platform to treat in a unified manner the heavy fermion properties in the two types of Yb-based crystals. △ Less

Submitted 16 April, 2018; originally announced April 2018.

Comments: 19 pages, 6 figures

Quasiperiodic ordering in thick Sn layer on $i$-Al-Pd-Mn: A possible quasicrystalline clathrate

Authors: Vipin Kumar Singh, Marek Mihalkovic, Marian Krajčí, Shuvam Sarkar, Pampa Sadhukhan, M. Maniraj, Abhishek Rai, Katariina Pussi, Deborah L. Schlagel, Thomas A. Lograsso, Ajay Kumar Shukla, Sudipta Roy Barman

Abstract: Realization of an elemental solid-state quasicrystal has remained a distant dream so far in spite of extensive work in this direction for almost two decades. Here, we report the discovery of quasiperiodic ordering in a thick layer of elemental Sn grown on icosahedral ($i$)-Al-Pd-Mn. The STM images and the LEED patterns of the Sn layer show specific structural signatures that portray quasiperiodici… ▽ More Realization of an elemental solid-state quasicrystal has remained a distant dream so far in spite of extensive work in this direction for almost two decades. Here, we report the discovery of quasiperiodic ordering in a thick layer of elemental Sn grown on icosahedral ($i$)-Al-Pd-Mn. The STM images and the LEED patterns of the Sn layer show specific structural signatures that portray quasiperiodicity but are distinct from the substrate. Photoemission spectroscopy reveals the existence of the pseudogap around the Fermi energy up to the maximal Sn thickness. The structure of the Sn layer is modeled as a novel form of quasicrystalline clathrate on the basis of the following: Firstly, from ab-initio theory, the energy of bulk Sn clathrate quasicrystal is lower than the high temperature metallic $β$-Sn phase, but higher than the low temperature $α$-Sn phase. A comparative study of the free slab energetics shows that surface energy favors clathrate over $α$-Sn up to about 4 nm layer thickness, and matches $β$-Sn for narrow window of slab thickness of 2-3 nm. Secondly, the bulk clathrate exhibits gap opening near Fermi energy, while the free slab form exhibits a pronouced pseudogap, which explains the pseudogap observed in photoemission. Thirdly, the STM images exhibit good agreement with clathrate model. We establish the adlayer-substrate compatibility based on very similar (within 1%) the cage-cage separation in the Sn clathrate and the pseudo-Mackay cluster-cluster separation on the $i$-Al-Pd-Mn surface. Furthermore, the nucleation centers of the Sn adlayer on the substrate are identified and these are shown to be a valid part of the Sn clathrate structure. Thus, based on both experiment and theory, we propose that 4 nm thick Sn adlayer deposited on 5-fold surface of $i$-Al-Pd-Mn substrate is in fact a metastable realization of elemental, clathrate family quasicrystal. △ Less

Submitted 9 January, 2020; v1 submitted 22 April, 2017; originally announced April 2017.

Comments: 10 figures in the Manuscript and the 8 figures in the Supplementary material

Journal ref: Physical Review Research 2, 013023 (2020)

Structure of Periodic Crystals and Quasicrystals in Ultrathin Film Ba-Ti-O

Authors: Eric Cockayne, Marek Mihalkovic, Christopher L. Henley

Abstract: We model the remarkable thin-film Ba-Ti-O structures formed by heat treatment of an initial perovskite BaTiO$_3$ thin film on a Pt(111) surface. All structures contain a rumpled Ti-O network with all Ti threefold coordinated with O, and with Ba occupying the larger. mainly Ti$_7$O$_7$, pores. The quasicrystal structure is a simple decoration of three types of tiles: square, triangle and 30 degree… ▽ More We model the remarkable thin-film Ba-Ti-O structures formed by heat treatment of an initial perovskite BaTiO$_3$ thin film on a Pt(111) surface. All structures contain a rumpled Ti-O network with all Ti threefold coordinated with O, and with Ba occupying the larger. mainly Ti$_7$O$_7$, pores. The quasicrystal structure is a simple decoration of three types of tiles: square, triangle and 30 degree rhombus, with edge lengths 6.85 Angstroms, joined edge-to-edge in a quasicrystalline pattern; observed crystalline Ba-Ti-O structures are built from these and other tiles. Simulated STM images reproduce the patterns seen experimentally, and identify the bright protrusions as Ba atoms. The models are consistent with all experimental observations. △ Less

Submitted 7 January, 2016; v1 submitted 21 October, 2015; originally announced October 2015.

Journal ref: Phys. Rev. B 93, 020101 (2016)

Phason space analysis and structure modeling of 100 A-scale dodecagonal quasicrystal in Mn-based alloy

Authors: Tsutomu Ishimasa, Shuhei Iwami, Norihito Sakaguchi, Ryo Oota, Marek Mihalkovic

Abstract: The dodecagonal quasicrystal classified into the five-dimensional space group P126/mmc, recently discovered in a Mn-Cr-Ni-Si alloy, has been analyzed using atomic-resolution spherical aberration-corrected electron microscopy, i.e. high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and conventional transmission electron microscopy. By observing along the 12-fold ax… ▽ More The dodecagonal quasicrystal classified into the five-dimensional space group P126/mmc, recently discovered in a Mn-Cr-Ni-Si alloy, has been analyzed using atomic-resolution spherical aberration-corrected electron microscopy, i.e. high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and conventional transmission electron microscopy. By observing along the 12-fold axis, non-periodic tiling consisting of an equilateral triangle and a square has been revealed, of which common edge length is a = 4.560 A. These tiles tend to form a network of dodecagons of which size is (2+Sqrt(3))a ~ 17 A in diameter. The tiling was interpreted as an aggregate of 100 A-scale oriented domains of high- and low-quality quasicrystals with small crystallites appearing at their boundaries. The quasicrystal domains exhibited a densely-filled circular acceptance region in the phason space. This is the first observation of the acceptance region in an actual dodecagonal quasicrystal. Atomic structure model consistent with the electron microscopy images is a standard Frank-Kasper decoration of the triangle and square tiles, that can be inferred from the crystal structures of Zr4Al3 and Cr3Si. Four kinds of layers located at z = 0, +-1/4 and 1/2 are stacked periodically along the 12-fold axis, and the atoms at z = 0 and 1/2 form hexagonal anti-prisms consistently with the 126-screw axis. The validity of this structure model was examined by means of powder X-ray diffraction. △ Less

Submitted 19 August, 2015; originally announced August 2015.

Comments: 21 pages, 3 tables, 16 figures

Prediction of stable insulating intermetallic compounds

Authors: M. Mihalkovic, M. Krajci, M. Widom

Abstract: We explore the stability of structure exhibiting hybridization gaps across a broad range of binary and ternary intermetallic compositions by means of band structure and total energy calculations. This search reveals previously unknown metal-based insulators, some with large gaps exceeding 1 eV, such as Al2Fe and Al4IrRe. We confirm large gaps using a hybrid density functional including exact excha… ▽ More We explore the stability of structure exhibiting hybridization gaps across a broad range of binary and ternary intermetallic compositions by means of band structure and total energy calculations. This search reveals previously unknown metal-based insulators, some with large gaps exceeding 1 eV, such as Al2Fe and Al4IrRe. We confirm large gaps using a hybrid density functional including exact exchange, and predict a gap of 2.2 eV for AlMnSi in the Pearson type tP6 structure, which is a chemically ordered ternary variant of the prototype MoSi2 (Pearson type tI6) structure. △ Less

Submitted 7 January, 2013; v1 submitted 4 January, 2013; originally announced January 2013.

Orientational interaction and ordering of Cd_4 tetrahedra in a quasicrystal approximant

Authors: Woosong Choi, Christopher L. Henley, Marek Mihalkovic

Abstract: We model the quasicrystal-related structure CaCd$_6$, a bcc packing of icosahedral clusters containing tetrahedra which undergo orientational orderings at T<100 K. We use general schemes to evaluate an effective Hamltonian for inter-tetrahedron orientations, based on all-atom relaxations, either in terms of discrete cluster orientations, or of continuous rotation angles. The effective Hamiltonian… ▽ More We model the quasicrystal-related structure CaCd$_6$, a bcc packing of icosahedral clusters containing tetrahedra which undergo orientational orderings at T<100 K. We use general schemes to evaluate an effective Hamltonian for inter-tetrahedron orientations, based on all-atom relaxations, either in terms of discrete cluster orientations, or of continuous rotation angles. The effective Hamiltonian is used in Monte Carlo simulations to find the (complex) ground state ordering pattern as a function of pressure. A preliminary investigation of thermal transitions found (in part of the pressure range) two different first-order transitions occurring below 100 K. △ Less

Submitted 21 December, 2012; originally announced December 2012.

Comments: 19 pages, 9 figures

Ab-initio tiling and atomic structure for decagonal ZnMgDy quasicrystal

Authors: M. Mihalkovic, C. L. Henley, J. Richmond-Decker, M. Oxborrow

Abstract: We discover the detailed atomic structure of $d$-MgZnY, a stable decagonal quasicrystal alloy of the layered Frank-Kasper type, and related phases, using the "tiling and decoration" approach. The atoms have invariable sites in the rectangle and triangle tiles of a 10-fold-symmetric planar tiling. To discover the lowest-energy structures, we combine the methods of density functional theory (DFT) to… ▽ More We discover the detailed atomic structure of $d$-MgZnY, a stable decagonal quasicrystal alloy of the layered Frank-Kasper type, and related phases, using the "tiling and decoration" approach. The atoms have invariable sites in the rectangle and triangle tiles of a 10-fold-symmetric planar tiling. To discover the lowest-energy structures, we combine the methods of density functional theory (DFT) total energy calculations, empirical oscillating pair potentials (fitted to DFT), fitting effective Hamiltonians for tilings, and discovering optimum tiling structures using a nonlocal tile-reshuffling algorithm. We find a family of practically stable compounds with varying composition, including the decagonal quasicrystal and the known Mg$_4$Zn$_7$ phase these are more stable than competing icosahedral structures by a small margi △ Less

Submitted 16 December, 2011; originally announced December 2011.

Caged clusters in Al$_{11}$Ir$_4$: structural transition and insulating phase

Authors: Marek Mihalkovič, C. L. Henley

Abstract: Using pair potentials fitted to an ab--initio database, combined with replica--exchange simulated annealing, we show the complex, quasicrystal-related Al$_{11}$Ir$_4$ compound contains a new version of the "pseudo-Mackay" icosahedral cluster, with non-icosahedral inner Al$_{10}$Ir and/or Al$_9$Ir clusters that exist in various orientations and account for partial occupancies in the reported struct… ▽ More Using pair potentials fitted to an ab--initio database, combined with replica--exchange simulated annealing, we show the complex, quasicrystal-related Al$_{11}$Ir$_4$ compound contains a new version of the "pseudo-Mackay" icosahedral cluster, with non-icosahedral inner Al$_{10}$Ir and/or Al$_9$Ir clusters that exist in various orientations and account for partial occupancies in the reported structure. Two different compositions show first-order transitions to orientationally ordered phases doubling the (cubic) unit cell, which are respectively metallic and insulating. △ Less

Submitted 23 June, 2012; v1 submitted 16 December, 2011; originally announced December 2011.

Comments: 5 pages and 3 figures

Empirical oscillating potentials for alloys from ab-initio fits and the prediction of quasicrystal-related structures in the Al-Cu-Sc system

Authors: M. Mihalkovic, C. L. Henley

Abstract: By fitting to a database of ab-initio forces and energies, we can extract pair potentials for alloys, with a simple six-parameter analytic form including Friedel oscillations, which give a remarkably faithful account of many complex intermetallic compounds. Furthermore, such potentials are combined with a method of discovering complex zero-temperature structures with hundreds of atoms per cell, gi… ▽ More By fitting to a database of ab-initio forces and energies, we can extract pair potentials for alloys, with a simple six-parameter analytic form including Friedel oscillations, which give a remarkably faithful account of many complex intermetallic compounds. Furthermore, such potentials are combined with a method of discovering complex zero-temperature structures with hundreds of atoms per cell, given only the composition and the con- straint of known lattice parameters, using molecular-dynamics quenches. We apply this approach to structure prediction in the Al-Cu-Sc quasicrystal-related system. △ Less

Submitted 30 September, 2011; originally announced September 2011.

Comments: 2 figures; submitted to PRB

Low-temperature structure of xi'-Al-Pd-Mn optimized by ab-initio methods

Authors: Benjamin Frigan, Alejandro Santana, Michael Engel, Daniel Schopf, Hans-Rainer Trebin, Marek Mihalkovic

Abstract: We have studied and resolved occupancy correlations in the existing average structure model of the complex metallic alloy xi'-Al-Pd-Mn [Boudard et al., Phil. Mag. A, 74, 939 (1996)], which has approximately 320 atoms in the unit cell and many fractionally occupied sites. Model variants were constructed systematically in a tiling-decoration approach and subjected to simulated annealing by use of bo… ▽ More We have studied and resolved occupancy correlations in the existing average structure model of the complex metallic alloy xi'-Al-Pd-Mn [Boudard et al., Phil. Mag. A, 74, 939 (1996)], which has approximately 320 atoms in the unit cell and many fractionally occupied sites. Model variants were constructed systematically in a tiling-decoration approach and subjected to simulated annealing by use of both density functional theory and molecular dynamics with empirical potentials. To obtain a measure for thermodynamic stability, we reproduce the Al-Pd-Mn phase diagram at T=0K, and derive an enthalpy of formation for each structure. Our optimal structure resolves a cloud of fractionally occupied sites in pseudo-Mackay clusters. In particular, we demonstrate the presence of rotational degrees of freedom of an Al9 inner shell, which is caged within two icosahedrally symmetric outer shells Al30 and Pd12. Outside these clusters, the chemical ordering on a chain of three nearby sites surprisingly breaks the inversion symmetry of the surrounding structure, and couples to an Al/vacancy site nearby. Our refined tiling-decoration model applies to any structure within the epsilon-phases family, including the metastable decagonal quasicrystalline phase. △ Less

Submitted 27 October, 2011; v1 submitted 8 September, 2011; originally announced September 2011.

Comments: 14 pages, 13 figures, 2 tables

Journal ref: Phys. Rev. B 84, 184203 (2011)

Structure and stability of Al$_2$Fe

Authors: M. Mihalkovič, M. Widom

Abstract: We employ first principles total energy and phonon calculations to address the structure and stability of Al$_2$Fe. This structure, which is reported as stable in the assessed Al-Fe phase diagram, is distinguished by an unusually low triclinic symmetry. The initial crystallographic structure determination additionally featured an unusual hole large enough to accommodate an additional atom. Our cal… ▽ More We employ first principles total energy and phonon calculations to address the structure and stability of Al$_2$Fe. This structure, which is reported as stable in the assessed Al-Fe phase diagram, is distinguished by an unusually low triclinic symmetry. The initial crystallographic structure determination additionally featured an unusual hole large enough to accommodate an additional atom. Our calculations indicate the hole must be filled, but predict the triclinic structure is unstable relative to a simpler structure based on the prototype MoSi$_2$. This MoSi$_2$ structure is interesting because it is predicted to be nonmagnetic, electrically insulating and high density, while the triclinic structure is magnetic, metallic and low density. We reconcile this seeming contradiction by demonstrating a high vibrational entropy that explains why the triclinic structure is stable at high temperatures. Finally, we note that Al$_5$Fe$_2$ poses a similar problem of unexplained stability. △ Less

Submitted 1 July, 2011; originally announced July 2011.

Comments: submitted to PRB

Matching rules from Al-Co potentials in an almost realistic model

Authors: Sejoon Lim, M. Mihalkovic, C. L. Henley

Abstract: We consider a model decagonal quasicrystal of composition Al$_{80.1}$Co$_{19.9}$ -- closely related to actual structures, and using realistic pair potentials -- on a quasilattice of candidate sites. Its ground state, according to simulations, is a Hexagon-Boat-Star tiling satisfying Penrose's matching rules. In this note, we rationalize these results in terms of the potentials; the Al-Co second-… ▽ More We consider a model decagonal quasicrystal of composition Al$_{80.1}$Co$_{19.9}$ -- closely related to actual structures, and using realistic pair potentials -- on a quasilattice of candidate sites. Its ground state, according to simulations, is a Hexagon-Boat-Star tiling satisfying Penrose's matching rules. In this note, we rationalize these results in terms of the potentials; the Al-Co second-neighbor potential well is crucial. △ Less

Submitted 30 August, 2008; originally announced September 2008.

Comments: 4 pp, 2 figures, for Intl. Conf. Quasicrystals ICQ10, to appear Z. Krist

Penrose Matching Rules from Realistic Potentials in a Model System

Authors: Sejoon Lim, M. Mihalkovic, C. L. Henley

Abstract: We exhibit a toy model of a binary decagonal Al-Co quasicrystal -- closely related to actual structures -- in which realistic pair potentials yield a ground state which appears to perfectly implement Penrose's matching rules, for Hexagon-Boat-Star (HBS) tiles of edge 2.45 A. The second minimum of the potentials is crucial for this result. We exhibit a toy model of a binary decagonal Al-Co quasicrystal -- closely related to actual structures -- in which realistic pair potentials yield a ground state which appears to perfectly implement Penrose's matching rules, for Hexagon-Boat-Star (HBS) tiles of edge 2.45 A. The second minimum of the potentials is crucial for this result. △ Less

Submitted 30 August, 2008; originally announced September 2008.

Comments: 7 pp, 2 figures; proc. "Quasicrystals: Silver Jubilee" (Tel Aviv, 2007), Phil. Mag. in press

Empirical oscillating potentials for alloys from ab-initio fits

Authors: M. Mihalkovič, C. L. Henley, M. Widom, P. Ganesh

Abstract: By fitting to a database of ab-initio forces and energies, we can extract pair potentials for alloys, with a simple six-parameter analytic form including Friedel oscillations, which give a remarkably faithful account of many complex intermetallic compounds. As examples we show results for (crystal or quasicrystal) structure prediction and phonon spectrum for three systems: Fe--B, Al--Mg--Zn, and… ▽ More By fitting to a database of ab-initio forces and energies, we can extract pair potentials for alloys, with a simple six-parameter analytic form including Friedel oscillations, which give a remarkably faithful account of many complex intermetallic compounds. As examples we show results for (crystal or quasicrystal) structure prediction and phonon spectrum for three systems: Fe--B, Al--Mg--Zn, and Al--Cu--Fe. △ Less

Submitted 20 February, 2008; v1 submitted 20 February, 2008; originally announced February 2008.

Comments: 5 pages 3 figures 2 tables

Symmetry-broken crystal structure of elemental boron at low temperature

Authors: M. Widom, M. Mihalkovic

Abstract: The crystal structure of boron is unique among chemical elements, highly complex, and imperfectly known. Experimentalists report the beta-rhombohedral (black) form is stable over all temperatures from absolute zero to melting. However, early calculations found its energy to be greater than the energy of the alpha-rhombohedral (red) form, implying beta cannot be stable at low temperatures. Furthe… ▽ More The crystal structure of boron is unique among chemical elements, highly complex, and imperfectly known. Experimentalists report the beta-rhombohedral (black) form is stable over all temperatures from absolute zero to melting. However, early calculations found its energy to be greater than the energy of the alpha-rhombohedral (red) form, implying beta cannot be stable at low temperatures. Furthermore, beta exhibits partially occupied sites, seemingly in conflict with the thermodynamic requirement that entropy vanish at low temperature. Using electronic density functional theory methods and an extensive search of the configuration space we find a unique, energy minimizing pattern of occupied and vacant sites that can be stable at low temperatures but that breaks the beta-rhombohedral symmetry. Even lower energies occur within larger unit cells. Alternative configurations lie nearby in energy, allowing the entropy of partial occupancy to stabilize the beta-rhombohedral structure through a phase transition at moderate temperature. △ Less

Submitted 4 December, 2007; originally announced December 2007.

Comments: 12 pages, 5 figures

Energy-based Structure Prediction for d(Al70Co20Ni10)

Authors: Nan Gu, M. Mihalkovic, C. L. Henley

Abstract: We use energy minimization principles to predict the structure of a decagonal quasicrystal - d(AlCoNi) - in the Cobalt-rich phase. Monte Carlo methods are then used to explore configurations while relaxation and molecular dynamics are used to obtain a more realistic structure once a low energy configuration has been found. We find five-fold symmetric decagons 12.8 A in diameter as the characteri… ▽ More We use energy minimization principles to predict the structure of a decagonal quasicrystal - d(AlCoNi) - in the Cobalt-rich phase. Monte Carlo methods are then used to explore configurations while relaxation and molecular dynamics are used to obtain a more realistic structure once a low energy configuration has been found. We find five-fold symmetric decagons 12.8 A in diameter as the characteristic formation of this composition, along with smaller pseudo-five-fold symmetric clusters filling the spaces between the decagons. We use our method to make comparisons with a recent experimental approximant structure model from Sugiyama et al (2002). △ Less

Submitted 7 March, 2006; v1 submitted 7 March, 2006; originally announced March 2006.

Comments: 10pp, 2 figures

Structure prediction for cobalt-rich decagonal AlCoNi from pair potentials

Authors: Nan Gu, M. Mihalkovic, C. L. Henley

Abstract: A systematic, decoration-based technique to discover the atomic structure of a decagonal quasicrystal, given pair potentials and experimentally measured lattice constants, is applied to the ``basic'' cobalt-rich decagonal Al-Co-Ni quasicrystal. First lattice-gas Monte Carlo simulations are performed, assuming the atomic sites are vertices of a rhombus tiling with edge 2.45 A. This phase is found… ▽ More A systematic, decoration-based technique to discover the atomic structure of a decagonal quasicrystal, given pair potentials and experimentally measured lattice constants, is applied to the ``basic'' cobalt-rich decagonal Al-Co-Ni quasicrystal. First lattice-gas Monte Carlo simulations are performed, assuming the atomic sites are vertices of a rhombus tiling with edge 2.45 A. This phase is found to be dominated by 13 A diameter decagon-shaped clusters, each with a pentagon of Co atoms at the center. These, and another smaller cluster, decorate vertices of a ``binary tiling'' with rhombus edge 10.4 A. Further simulations with a restricted site list show that Al arrangements on the borders of the 13 A decagon cluster form Hexagon, Boat, and Star tiles with edge 2.45 A; they indicate specific sites for Co versus Ni atoms, and how the structure adapts to small composition changes. In the second half of the paper, relaxation (augmented by molecular dynamics annealing) is used to obtain realistic structures. The dominant new feature is a set of linear ``channels'' attractive to Al atoms and running transverse to the layers. Each is typically occupied by three atoms in four layers, implying puckering and a spontaneous period doubling to c $\approx$ 8 A. Puckering favors pentagonal long range order of the cluster orientations. Our simulation captures most features of the related $W$-AlCoNi crystal, except for its pentagonal bipyramid motif. △ Less

Submitted 3 February, 2006; originally announced February 2006.

Comments: 39pp, 17 figures

Co-rich decagonal Al-Co-Ni: predicting structure, orientational order, and puckering

Authors: Nan Gu, C. L. Henley, M. Mihalkovic

Abstract: We apply systematic methods previously used by Mihalkovic et al. to predict the structure of the `basic' Co-rich modification of the decagonal Al70 Co20 Ni10 layered quasicrystal, based on known lattice constants and previously calculated pair potentials. The modelling is based on Penrose tile decoration and uses Monte Carlo annealing to discover the dominant motifs, which are converted into rul… ▽ More We apply systematic methods previously used by Mihalkovic et al. to predict the structure of the `basic' Co-rich modification of the decagonal Al70 Co20 Ni10 layered quasicrystal, based on known lattice constants and previously calculated pair potentials. The modelling is based on Penrose tile decoration and uses Monte Carlo annealing to discover the dominant motifs, which are converted into rules for another level of description. The result is a network of edge-sharing large decagons on a binary tiling of edge 10.5 A. A detailed analysis is given of the instability of a four-layer structure towards $c$-doubling and puckering of the atoms out of the layers, which is applied to explain the (pentagonal) orientational order. △ Less

Submitted 10 December, 2005; originally announced December 2005.

Comments: IOP LaTex; 7 pp, 2 figures. In press, Phil. Mag. A (Proc. Intl. Conf. on Quasicrystals 9, Ames Iowa, May 2005)

Stability of Fe-based alloys with structure type C6Cr23

Authors: M. Widom, M. Mihalkovic

Abstract: Bulk metallic glass forms when liquid metal alloys solidify without crystalization. In the search for Iron-based bulk glass-forming alloys of the metal-metalloid type (Fe-B- and Fe-C-based), crystals based on the structural prototype C6Cr23 often preempt the amorphous phase. Destabilizing this competing crystal structure could enhance glass-formability. We carry out first-principles total energy… ▽ More Bulk metallic glass forms when liquid metal alloys solidify without crystalization. In the search for Iron-based bulk glass-forming alloys of the metal-metalloid type (Fe-B- and Fe-C-based), crystals based on the structural prototype C6Cr23 often preempt the amorphous phase. Destabilizing this competing crystal structure could enhance glass-formability. We carry out first-principles total energy calculations of enthalpy of formation to identify third elements that can effectively destabilize C6Cr23. Yttrium appears optimal among transition metals, and rare earths also are suitable. Atomic size is the dominant factor. △ Less

Submitted 23 July, 2004; originally announced July 2004.

Comments: 6 pages, 4 figs

First-principles prediction of a decagonal quasicrystal containing boron

Authors: M. Mihalkovič, M. Widom

Abstract: We interpret experimentally known B-Mg-Ru crystals as quasicrystal approximants. These approximant structures imply a deterministic decoration of tiles by atoms that can be extended quasiperiodically. Experimentally observed structural disorder corresponds to phason (tile flip) fluctuations. First-principles total energy calculations reveal that many distinct tilings lie close to stability at lo… ▽ More We interpret experimentally known B-Mg-Ru crystals as quasicrystal approximants. These approximant structures imply a deterministic decoration of tiles by atoms that can be extended quasiperiodically. Experimentally observed structural disorder corresponds to phason (tile flip) fluctuations. First-principles total energy calculations reveal that many distinct tilings lie close to stability at low temperatures. Transfer matrix calculations based on these energies suggest a phase transition from a crystalline state at low temperatures to a high temperature state characterized by tile fluctuations. We predict B$_{38}$Mg$_{17}$Ru$_{45}$ forms a decagonal quasicrystal that is metastable at low temperatures and may be thermodynamically stable at high temperatures. △ Less

Submitted 14 May, 2004; originally announced May 2004.

Comments: 4 pages, 3 figures, submitted to Phys. Rev. Lett

Cohesive energies of Fe-based glass-forming alloys

Authors: M. Mihalkovič, M. Widom

Abstract: We calculate the cohesive energies of Fe-based glass-forming alloys in the B-Fe-Y-Zr quaternary system. Our {\it ab-initio} calculations fully relax atomic positions and lattice parameters yielding enthalpies of mixing at T=0K. We examine both the known equilibrium and metastable phases as well as a selection of plausible structures drawn from related alloy systems. This method, generally reprod… ▽ More We calculate the cohesive energies of Fe-based glass-forming alloys in the B-Fe-Y-Zr quaternary system. Our {\it ab-initio} calculations fully relax atomic positions and lattice parameters yielding enthalpies of mixing at T=0K. We examine both the known equilibrium and metastable phases as well as a selection of plausible structures drawn from related alloy systems. This method, generally reproduces experimentally determined phase diagrams while providing additional information about energetics of metastable and unstable structures. In particular we can identify crystalline structures whose formation competes with the metallic glass. In some cases we identify previously unknown structures or observe possible errors in the experimental phase diagrams. △ Less

Submitted 13 May, 2004; originally announced May 2004.

Comments: 16 pages, 10 figures 4 tables, submitted to Phys. Rev. B

Quasicrystal approximants with novel compositions and structures

Authors: M. Mihalkovic, M. Widom

Abstract: We identify several new quasicrystal approximants in alloy systems in which quasicrystals have not been previously reported. Some occur in alloys with large size contrast between the constituent elements, either containing small Boron atoms, or large Ca/Eu atoms, leading to quasicrystal structures quite different from currently known systems where the size contrast is smaller. Another group of t… ▽ More We identify several new quasicrystal approximants in alloy systems in which quasicrystals have not been previously reported. Some occur in alloys with large size contrast between the constituent elements, either containing small Boron atoms, or large Ca/Eu atoms, leading to quasicrystal structures quite different from currently known systems where the size contrast is smaller. Another group of the approximants are layered Frank--Kasper structures, demonstrating competition between decagonal and dodecagonal ordering within this family of structures. △ Less

Submitted 13 February, 2004; originally announced February 2004.

Comments: 6 pages, 8 figures

Order-disorder transition in the Cd-Ca cubic approximant

Authors: M. Widom, M. Mihalkovic

Abstract: Recent experiments discovered an order-disorder transition occuring at low temperatures in large unit 1/1 cell cubic approximants of the stable Cd-based binary alloy quasicrystals. The transition is related to correlations among orientational degrees of freedom whose separations are around 12 Å. We analyze the interactions between the degrees of freedom using {\em ab-initio} calculations for Cd-… ▽ More Recent experiments discovered an order-disorder transition occuring at low temperatures in large unit 1/1 cell cubic approximants of the stable Cd-based binary alloy quasicrystals. The transition is related to correlations among orientational degrees of freedom whose separations are around 12 Å. We analyze the interactions between the degrees of freedom using {\em ab-initio} calculations for Cd-Ca alloys and derive an equivalent antiferromagnetic Ising model which shows a similar phase transition. However, the calculated transition temperature is higher than observed experimentally, indicating that the actual structure and its order-disorder transition are more complex than originally proposed. A side-benefit of our study is the discovery of a canonical-cell decoration model for the Cd-Ca icosahedral phase. △ Less

Submitted 13 February, 2004; originally announced February 2004.

Comments: 6 pages, 4 figures

Equilibrium structure of decagonal AlNiCo

Authors: S. Naidu, M. Mihalkovic, M. Widom

Abstract: We investigate the high temperature decagonal quasicrystalline phase of Al$_{72}$Ni$_{20}$Co$_8$ using a quasilattice gas Monte-Carlo simulation. To avoid biasing towards a specific model we use an over-dense site list with a large fraction of free sites, permitting the simulation to explore an extended region of perpendicular space. Representing the atomic surface occupancy in a basis of harmon… ▽ More We investigate the high temperature decagonal quasicrystalline phase of Al$_{72}$Ni$_{20}$Co$_8$ using a quasilattice gas Monte-Carlo simulation. To avoid biasing towards a specific model we use an over-dense site list with a large fraction of free sites, permitting the simulation to explore an extended region of perpendicular space. Representing the atomic surface occupancy in a basis of harmonic functions directly reveals the 5-fold symmetric component of our data. Occupancy is examined in physical and perpendicular space. △ Less

Submitted 13 February, 2004; originally announced February 2004.

Comments: 6 pages, 7 figures

Combined energy -- diffraction data refinement of decagonal AlNiCo

Authors: M. Mihalkovič, C. L. Henley, M. Widom

Abstract: We incorporate realistic pair potential energies directly into a non-linear least-square fit of diffraction data to quantitatively compare structure models with experiment for the Ni-rich $d$(AlNiCo) quasicrystal. The initial structure models are derived from a few {\it a priori} assumptions (gross features of the Patterson function) and the pair potentials. In place of the common hyperspace app… ▽ More We incorporate realistic pair potential energies directly into a non-linear least-square fit of diffraction data to quantitatively compare structure models with experiment for the Ni-rich $d$(AlNiCo) quasicrystal. The initial structure models are derived from a few {\it a priori} assumptions (gross features of the Patterson function) and the pair potentials. In place of the common hyperspace approach to the structure refinement of quasicrystals, we use a real-space tile decoration scheme, which does not rely on strict quasiperiodicity, and makes it easy to enforce sensible local arrangements of the atoms. Inclusion of the energies provides information complementary to the diffraction data and protects the fit procedure from converging on spurious solutions. The method pinpoints sites which are likely to break the symmetry of their local environment. △ Less

Submitted 26 November, 2003; originally announced November 2003.

Comments: 7 pages, 5 figures, proceedings of the Internation Conference on Quasicrystals, Bangalore, India, August 2002

Tile Hamiltonians for Decagonal Phases

Authors: M. Widom, I. Al-Lehyani, M. Mihalkovic

Abstract: A tile Hamiltonian (TH) replaces the actual atomic interactions in a quasicrystal with effective interactions between and within tiles. We study Al-Co-Ni and Al-Co-Cu decagonal quasicrystals described as decorated Hexagon-Boat-Star (HBS) tiles using {\em ab-initio} methods. A dominant term in the TH counts the number of H, B and S tiles, favoring tilings of H and B only. In our model for Al-Co-C… ▽ More A tile Hamiltonian (TH) replaces the actual atomic interactions in a quasicrystal with effective interactions between and within tiles. We study Al-Co-Ni and Al-Co-Cu decagonal quasicrystals described as decorated Hexagon-Boat-Star (HBS) tiles using {\em ab-initio} methods. A dominant term in the TH counts the number of H, B and S tiles, favoring tilings of H and B only. In our model for Al-Co-Cu, chemical ordering of Cu and Co along tile edges defines tile edge arrowing. Unlike the edge arrowing of Penrose matching rules, however, the energetics for Al-Co-Cu do not force quasiperiodicity. Energetically favored structures resemble crystalline approximants to which the actual quasicrystalline compounds transform at low temperature. △ Less

Submitted 26 December, 2002; originally announced December 2002.

Comments: Proceedings of the 8th International Conference on Quasicrystals, to be published in J. Noncryst. Solids (2003), 6 pages and 8 figures

Temperature-dependent "phason" elasticity in a random tiling quasicrystal

Authors: M. Mihalkovic, C. L. Henley

Abstract: Both ``phason'' elastic constants have been measured from Monte Carlo simulations of a random-tiling icosahedral quasicrystal model with a Hamiltonian. The low-temperature limit approximates the ``canonical-cell'' tiling used to describe several real quasicrystals. The elastic constant K2 changes sign from positive to negative with decreasing temperature; in the ``canonical-cell'' limit, K2/K1 a… ▽ More Both ``phason'' elastic constants have been measured from Monte Carlo simulations of a random-tiling icosahedral quasicrystal model with a Hamiltonian. The low-temperature limit approximates the ``canonical-cell'' tiling used to describe several real quasicrystals. The elastic constant K2 changes sign from positive to negative with decreasing temperature; in the ``canonical-cell'' limit, K2/K1 appears to approach -0.7, about the critical value for a phason-mode modulation instability. We compare to the experiments on i-AlPdMn and i-AlCuFe. △ Less

Submitted 13 May, 2002; originally announced May 2002.

Comments: 5 pages, 2 Postscript figures, LaTeX, uses revtex4, submitted to PRB

Total-energy-based structure prediction for d(AlNiCo)

Authors: Christopher L. Henley, Marek Mihalkovic, Michael Widom

Abstract: One may predict a quasicrystal structure starting from electrons and quantum mechanics, as approximated by interatomic pair potentials calibrated with ab-initio total-energy calculations, combined with the experimentally known composition and lattice constants. Here we report our progress on the "basic Ni" decagonal phase d(Al70 Ni21 Co9). Atomic configurations are represented as decorations of… ▽ More One may predict a quasicrystal structure starting from electrons and quantum mechanics, as approximated by interatomic pair potentials calibrated with ab-initio total-energy calculations, combined with the experimentally known composition and lattice constants. Here we report our progress on the "basic Ni" decagonal phase d(Al70 Ni21 Co9). Atomic configurations are represented as decorations of (possibly) random tilings. Our method was Monte Carlo simulation using both lattice-gas hops by atoms and tile-flip rearrangements, eventually followed by molecular dynamics and relaxation of the atom positions. Initially allowing the greatest freedom of atom positions, we observed nearly deterministic structural rules and enforced these as constraints involving larger tiles; this procedure was repeated at the next level of modeling. In crude and preliminary form, the effective Hamiltonian for tile-tile interactions is known, which is needed for further simulations to infer the long-range order. Our atomic arrangements in the 20 A decagonal cluster are compared with three structure models based on recent experiments. △ Less

Submitted 28 February, 2002; originally announced February 2002.

Comments: 6 pp, 3 figures; invited talk at "Quasicrystals 2001" (Sendai, Japan, Sept. 2001); to appear, J. Alloys and Compounds, 2002

Total-energy-based prediction of a quasicrystal structure

Authors: M. Mihalkovič, I. Al-Lehyani, E. Cockayne, C. L. Henley, N. Moghadam, J. A. Moriarty, Y. Wang, M. Widom

Abstract: Quasicrystals are metal alloys whose noncrystallographic symmetry and lack of structural periodicity challenge methods of experimental structure determination. Here we employ quantum-based total-energy calculations to predict the structure of a decagonal quasicrystal from first principles considerations. We employ Monte Carlo simulations, taking as input the knowledge that a decagonal phase occu… ▽ More Quasicrystals are metal alloys whose noncrystallographic symmetry and lack of structural periodicity challenge methods of experimental structure determination. Here we employ quantum-based total-energy calculations to predict the structure of a decagonal quasicrystal from first principles considerations. We employ Monte Carlo simulations, taking as input the knowledge that a decagonal phase occurs in Al-Ni-Co near a given composition, and using a few features of the experimental Patterson function. The resulting structure obeys a nearly deterministic decoration of tiles on a hierarchy of length scales related by powers of $τ$, the golden mean. △ Less

Submitted 26 March, 2001; v1 submitted 5 February, 2001; originally announced February 2001.

Comments: 9 pages, 3 figures

Structure determinations for random-tiling quasicrystals

Authors: C. L. Henley, V. Elser, M. Mihalkovic

Abstract: How, in principle, could one solve the atomic structure of a quasicrystal, modeled as a random tiling decorated by atoms, and what techniques are available to do it? One path is to solve the phase problem first, obtaining the density in a higher dimensional space which yields the_averaged_ scattering density in 3-dimensional space by the usual construction of an incommensurate cut. A novel direc… ▽ More How, in principle, could one solve the atomic structure of a quasicrystal, modeled as a random tiling decorated by atoms, and what techniques are available to do it? One path is to solve the phase problem first, obtaining the density in a higher dimensional space which yields the_averaged_ scattering density in 3-dimensional space by the usual construction of an incommensurate cut. A novel direct method for this is summarized and applied to an i(AlPdMn) data set. This averaged density falls short of a true structure determination (which would reveal the typical_unaveraged_ atomic patterns.) We discuss the problematic validity of inferring an ideal structure by simply factoring out a ``perp-space'' Debye-Waller factor, and we test this using simulations of rhombohedral tilings. A second, ``unified'' path is to relate the measured and modeled intensities directly, by adjusting parameters in a simulation to optimize the fit. This approach is well suited for unifying structural information from diffraction and from minimizing total energies derived ultimately from ab-initio calculations. Finally, we discuss the special pitfalls of fitting random-tiling decagonal phases. △ Less

Submitted 8 April, 2000; originally announced April 2000.

Comments: 19 pages, LaTeX. To appear, Z. Kristallogr