Showing 1–33 of 33 results for author: Michel, A

Quantum simulation for strongly interacting fermions with neutral atoms array: towards the simulation of materials of interest

Authors: Antoine Michel

Abstract: Quantum simulation holds the promise of improving the atomic simulations used at EDF to anticipate the ageing of materials of interest. One simulator in particular seems well suited to modeling interacting electrons: the Rydberg atoms quantum processor. The first task of this thesis is to design a variational algorithm that can be implemented on a Rydberg atom simulator for chemistry. This algorit… ▽ More Quantum simulation holds the promise of improving the atomic simulations used at EDF to anticipate the ageing of materials of interest. One simulator in particular seems well suited to modeling interacting electrons: the Rydberg atoms quantum processor. The first task of this thesis is to design a variational algorithm that can be implemented on a Rydberg atom simulator for chemistry. This algorithm is specially designed for this platform and optimized by recent theoretical tools. We compare our numerical results, obtained with an emulation of a real experiment, with other approaches and show that our method is more efficient. Finally, we show that by limiting the number of measurements to make the experiment feasible on a real architecture, we can reach the fundamental energy of H2, LiH and BeH2 molecules with 5% error.For a second algorithm, we used the "slave" spin method to implement the physics of the Fermi-Hubbard 2D model on a Rydberg atom simulator. The idea is to decouple the degrees of freedom of charges and "slave" spins using a mean field to obtain two self-consistent Hamiltonians: a classically solvable one and an Ising Hamiltonian that can be reproduced on a real machine. We show numerically that we can recover a Mott transition from the initial model with this method even when emulating the noise of a real experiment, and we show that we can also recover the dynamics of non-equilibrium electrons in this same paradigm with good results. Both algorithms can possibly be improved theoretically until they reach materials of interest, but they can also be implemented on today's existing architectures, to achieve a potential quantum advantage △ Less

Submitted 19 June, 2024; originally announced June 2024.

Comments: Phd manuscript

An Early Categorization of Prompt Injection Attacks on Large Language Models

Authors: Sippo Rossi, Alisia Marianne Michel, Raghava Rao Mukkamala, Jason Bennett Thatcher

Abstract: Large language models and AI chatbots have been at the forefront of democratizing artificial intelligence. However, the releases of ChatGPT and other similar tools have been followed by growing concerns regarding the difficulty of controlling large language models and their outputs. Currently, we are witnessing a cat-and-mouse game where users attempt to misuse the models with a novel attack calle… ▽ More Large language models and AI chatbots have been at the forefront of democratizing artificial intelligence. However, the releases of ChatGPT and other similar tools have been followed by growing concerns regarding the difficulty of controlling large language models and their outputs. Currently, we are witnessing a cat-and-mouse game where users attempt to misuse the models with a novel attack called prompt injections. In contrast, the developers attempt to discover the vulnerabilities and block the attacks simultaneously. In this paper, we provide an overview of these emergent threats and present a categorization of prompt injections, which can guide future research on prompt injections and act as a checklist of vulnerabilities in the development of LLM interfaces. Moreover, based on previous literature and our own empirical research, we discuss the implications of prompt injections to LLM end users, developers, and researchers. △ Less

Submitted 31 January, 2024; originally announced February 2024.

Comments: 21 pages double spacing

Hubbard physics with Rydberg atoms: using a quantum spin simulator to simulate strong fermionic correlations

Authors: Antoine Michel, Loïc Henriet, Christophe Domain, Antoine Browaeys, Thomas Ayral

Abstract: We propose a hybrid quantum-classical method to investigate the equilibrium physics and the dynamics of strongly correlated fermionic models with spin-based quantum processors. Our proposal avoids the usual pitfalls of fermion-to-spin map**s thanks to a slave-spin method which allows to approximate the original Hamiltonian into a sum of self-correlated free-fermions and spin Hamiltonians. Taking… ▽ More We propose a hybrid quantum-classical method to investigate the equilibrium physics and the dynamics of strongly correlated fermionic models with spin-based quantum processors. Our proposal avoids the usual pitfalls of fermion-to-spin map**s thanks to a slave-spin method which allows to approximate the original Hamiltonian into a sum of self-correlated free-fermions and spin Hamiltonians. Taking as an example a Rydberg-based analog quantum processor to solve the interacting spin model, we avoid the challenges of variational algorithms or Trotterization methods. We explore the robustness of the method to experimental imperfections by applying it to the half-filled, single-orbital Hubbard model on the square lattice in and out of equilibrium. We show, through realistic numerical simulations of current Rydberg processors, that the method yields quantitatively viable results even in the presence of imperfections: it allows to gain insights into equilibrium Mott physics as well as the dynamics under interaction quenches. This method thus paves the way to the investigation of physical regimes -- whether out-of-equilibrium, doped, or multiorbital -- that are difficult to explore with classical processors. △ Less

Submitted 19 June, 2024; v1 submitted 13 December, 2023; originally announced December 2023.

Journal ref: Phys. Rev. B 109, 2024, 174409

The 2nd Workshop on Maritime Computer Vision (MaCVi) 2024

Authors: Benjamin Kiefer, Lojze Žust, Matej Kristan, Janez Perš, Matija Teršek, Arnold Wiliem, Martin Messmer, Cheng-Yen Yang, Hsiang-Wei Huang, Zhongyu Jiang, Heng-Cheng Kuo, Jie Mei, Jenq-Neng Hwang, Daniel Stadler, Lars Sommer, Kaer Huang, Aiguo Zheng, Weitu Chong, Kanokphan Lertniphonphan, Jun Xie, Feng Chen, Jian Li, Zhepeng Wang, Luca Zedda, Andrea Loddo , et al. (24 additional authors not shown)

Abstract: The 2nd Workshop on Maritime Computer Vision (MaCVi) 2024 addresses maritime computer vision for Unmanned Aerial Vehicles (UAV) and Unmanned Surface Vehicles (USV). Three challenges categories are considered: (i) UAV-based Maritime Object Tracking with Re-identification, (ii) USV-based Maritime Obstacle Segmentation and Detection, (iii) USV-based Maritime Boat Tracking. The USV-based Maritime Obst… ▽ More The 2nd Workshop on Maritime Computer Vision (MaCVi) 2024 addresses maritime computer vision for Unmanned Aerial Vehicles (UAV) and Unmanned Surface Vehicles (USV). Three challenges categories are considered: (i) UAV-based Maritime Object Tracking with Re-identification, (ii) USV-based Maritime Obstacle Segmentation and Detection, (iii) USV-based Maritime Boat Tracking. The USV-based Maritime Obstacle Segmentation and Detection features three sub-challenges, including a new embedded challenge addressing efficicent inference on real-world embedded devices. This report offers a comprehensive overview of the findings from the challenges. We provide both statistical and qualitative analyses, evaluating trends from over 195 submissions. All datasets, evaluation code, and the leaderboard are available to the public at https://macvi.org/workshop/macvi24. △ Less

Submitted 23 November, 2023; originally announced November 2023.

Comments: Part of 2nd Workshop on Maritime Computer Vision (MaCVi) 2024 IEEE Xplore submission as part of WACV 2024

Next-Generation Earth System Models: Towards Reliable Hybrid Models for Weather and Climate Applications

Authors: Tom Beucler, Erwan Koch, Sven Kotlarski, David Leutwyler, Adrien Michel, Jonathan Koh

Abstract: We review how machine learning has transformed our ability to model the Earth system, and how we expect recent breakthroughs to benefit end-users in Switzerland in the near future. Drawing from our review, we identify three recommendations. Recommendation 1: Develop Hybrid AI-Physical Models: Emphasize the integration of AI and physical modeling for improved reliability, especially for longer pr… ▽ More We review how machine learning has transformed our ability to model the Earth system, and how we expect recent breakthroughs to benefit end-users in Switzerland in the near future. Drawing from our review, we identify three recommendations. Recommendation 1: Develop Hybrid AI-Physical Models: Emphasize the integration of AI and physical modeling for improved reliability, especially for longer prediction horizons, acknowledging the delicate balance between knowledge-based and data-driven components required for optimal performance. Recommendation 2: Emphasize Robustness in AI Downscaling Approaches, favoring techniques that respect physical laws, preserve inter-variable dependencies and spatial structures, and accurately represent extremes at the local scale. Recommendation 3: Promote Inclusive Model Development: Ensure Earth System Model development is open and accessible to diverse stakeholders, enabling forecasters, the public, and AI/statistics experts to use, develop, and engage with the model and its predictions/projections. △ Less

Submitted 26 January, 2024; v1 submitted 22 November, 2023; originally announced November 2023.

Comments: 12 pages, 1 figure, submitted as part of the Swiss Academy of Engineering Sciences' 2024 whitepaper on "Artificial Intelligence for Climate Change Mitigation"

The stable category of preordered groups

Authors: Aline Michel

Abstract: In this article, we present the stable category of preordered groups associated with some Z-pretorsion theory. We first define such a category as well as the related functor, and then study their properties. By doing so, we provide a description of both Z-kernels and Z-cokernels in the category of preordered groups. Finally, we prove the universal property of the stable category. In this article, we present the stable category of preordered groups associated with some Z-pretorsion theory. We first define such a category as well as the related functor, and then study their properties. By doing so, we provide a description of both Z-kernels and Z-cokernels in the category of preordered groups. Finally, we prove the universal property of the stable category. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Comments: 12 pages

Finding substructures in protostellar disks in Ophiuchus

Authors: Arnaud Michel, Sarah I. Sadavoy, Patrick D. Sheehan, Leslie W. Looney, Erin G. Cox, John J. Tobin, Nienke van der Marel, Dominique M. Segura-Cox

Abstract: High-resolution, millimeter observations of disks at the protoplanetary stage reveal substructures such as gaps, rings, arcs, spirals, and cavities. While many protoplanetary disks host such substructures, only a few at the younger protostellar stage have shown similar features. We present a detailed search for early disk substructures in ALMA 1.3 and 0.87~mm observations of ten protostellar disks… ▽ More High-resolution, millimeter observations of disks at the protoplanetary stage reveal substructures such as gaps, rings, arcs, spirals, and cavities. While many protoplanetary disks host such substructures, only a few at the younger protostellar stage have shown similar features. We present a detailed search for early disk substructures in ALMA 1.3 and 0.87~mm observations of ten protostellar disks in the Ophiuchus star-forming region. Of this sample, four disks have identified substructure, two appear to be smooth disks, and four are considered ambiguous. The structured disks have wide Gaussian-like rings ($σ_R/R_{\mathrm{disk}}\sim0.26$) with low contrasts ($C<0.2$) above a smooth disk profile, in comparison to protoplanetary disks where rings tend to be narrow and have a wide variety of contrasts ($σ_R/R_{\mathrm{disk}}\sim0.08$ and $C$ ranges from $0-1$). The four protostellar disks with the identified substructures are among the brightest sources in the Ophiuchus sample, in agreement with trends observed for protoplanetary disks. These observations indicate that substructures in protostellar disks may be common in brighter disks. The presence of substructures at the earliest stages suggests an early start for dust grain growth and, subsequently, planet formation. The evolution of these protostellar substructures is hypothesized in two potential pathways: (1) the rings are the sites of early planet formation, and the later observed protoplanetary disk ring-gap pairs are secondary features, or (2) the rings evolve over the disk lifetime to become those observed at the protoplanetary disk stage. △ Less

Submitted 14 September, 2023; originally announced September 2023.

Comments: Accepted by ApJ, 22 pages, 10 figures

Central extensions of preordered groups

Authors: Marino Gran, Aline Michel

Abstract: We prove that the category of preordered groups contains two full reflective subcategories that give rise to some interesting Galois theories. The first one is the category of the so-called commutative objects, which are precisely the preordered groups whose group law is commutative. The second one is the category of abelian objects, that turns out to be the category of monomorphisms in the catego… ▽ More We prove that the category of preordered groups contains two full reflective subcategories that give rise to some interesting Galois theories. The first one is the category of the so-called commutative objects, which are precisely the preordered groups whose group law is commutative. The second one is the category of abelian objects, that turns out to be the category of monomorphisms in the category of abelian groups. We give a precise description of the reflector to this subcategory, and we prove that it induces an admissible Galois structure and then a natural notion of categorical central extension. We then characterize the central extensions of preordered groups in purely algebraic terms: these are shown to be the central extensions of groups having the additional property that their restriction to the positive cones is a special homogeneous surjection of monoids. △ Less

Submitted 7 March, 2023; originally announced March 2023.

Comments: 19 pages

MSC Class: 18E50 (Primary) 06F15 18A40 18C40 18E08 (Secondary)

A blueprint for a Digital-Analog Variational Quantum Eigensolver using Rydberg atom arrays

Authors: Antoine Michel, Sebastian Grijalva, Loïc Henriet, Christophe Domain, Antoine Browaeys

Abstract: We address the task of estimating the ground-state energy of Hamiltonians coming from chemistry. We study numerically the behavior of a digital-analog variational quantum eigensolver for the H2, LiH and BeH2 molecules, and we observe that one can estimate the energy to a few percent points of error leveraging on learning the atom register positions with respect to selected features of the molecula… ▽ More We address the task of estimating the ground-state energy of Hamiltonians coming from chemistry. We study numerically the behavior of a digital-analog variational quantum eigensolver for the H2, LiH and BeH2 molecules, and we observe that one can estimate the energy to a few percent points of error leveraging on learning the atom register positions with respect to selected features of the molecular Hamiltonian and then an iterative pulse sha** optimization, where each step performs a derandomization energy estimation. △ Less

Submitted 23 April, 2023; v1 submitted 16 January, 2023; originally announced January 2023.

Comments: 13 pages, 8 figures

Journal ref: Phys. Rev. A 107, 2023, 042602

Synthesis of Near-Field Arrays based on Electromagnetic Inner Products

Authors: Francesco Lisi, Andrea Michel, Paolo Nepa

Abstract: Near-field antennas have been successfully adopted in several wireless applications. To exploit the high reconfigurability of array antennas, multiple synthesis techniques for arrays operating in the near-field region have been proposed. Building upon previous works on eigenmode expansions of the radiated fields, two synthesis methods for the excitations of near-field arrays based on the definitio… ▽ More Near-field antennas have been successfully adopted in several wireless applications. To exploit the high reconfigurability of array antennas, multiple synthesis techniques for arrays operating in the near-field region have been proposed. Building upon previous works on eigenmode expansions of the radiated fields, two synthesis methods for the excitations of near-field arrays based on the definition of an inner product on the electromagnetic fields are investigated: the "maximum norm" and "minimum error field norm" methods. The "maximum norm" method computes the array excitations that maximize either the active power flow through a target surface or the electric/magnetic energy stored in an assigned volume, depending on the adopted inner product. The performance of the maximum active power flow method is compared with the one of the simpler conjugate phase method. Furthermore, the limit solution achieved when the target surface reaches the far-field region is compared against the "maximum Beam Collection Efficiency" method. The "minimum error field norm" method allows to synthesize a given target field. As an example, the latter method is used to find the optimal excitation of a Plane Wave Generator with a spherical quiet zone. The effectiveness and performance of the discussed synthesis methods are validated through numerical simulations. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Most planets might have more than 5 Myr of time to form

Authors: Susanne Pfalzner, Shahrzad Dehghani, Arnaud Michel

Abstract: The lifetime of protoplanetary disks is a crucial parameter for planet formation research. Observations of disk fractions in star clusters imply median disk lifetimes of 1 -- 3 Myr. This very short disk lifetime calls for planet formation to occur extremely rapidly. We show that young, distant clusters ($\leq$ 5 Myr, $>$ 200 pc) often dominate these types of studies. Such clusters frequently suffe… ▽ More The lifetime of protoplanetary disks is a crucial parameter for planet formation research. Observations of disk fractions in star clusters imply median disk lifetimes of 1 -- 3 Myr. This very short disk lifetime calls for planet formation to occur extremely rapidly. We show that young, distant clusters ($\leq$ 5 Myr, $>$ 200 pc) often dominate these types of studies. Such clusters frequently suffer from limiting magnitudes leading to an over-representation of high-mass stars. As high-mass stars disperse their disks earlier, the derived disk lifetimes apply best to high-mass stars rather than low-mass stars. Including only nearby clusters ($<$ 200 pc) minimizes the effect of limiting magnitude. In this case, the median disk lifetime of low-mass stars is with 5 -- 10 Myr, thus much longer than often claimed. The longer timescales provide planets ample time to form. How high-mass stars form planets so much faster than low-mass stars is the next grand challenges. △ Less

Submitted 5 October, 2022; originally announced October 2022.

Comments: 10 pages, 3 figures, accepted for ApJL

A millimeter-multiwavelength continuum study of VLA 1623 West

Authors: Arnaud Michel, Sarah I. Sadavoy, Patrick D. Sheehan, Leslie W. Looney, Erin G. Cox

Abstract: VLA 1623 West is an ambiguous source that has been described as a shocked cloudlet as well as a protostellar disk. We use deep ALMA 1.3 and 0.87 millimeter observations to constrain its shape and structure to determine its origins better. We use a series of geometric models to fit the uv visibilities at both wavelengths with GALARIO. Although the Real visibilities show structures similar to what h… ▽ More VLA 1623 West is an ambiguous source that has been described as a shocked cloudlet as well as a protostellar disk. We use deep ALMA 1.3 and 0.87 millimeter observations to constrain its shape and structure to determine its origins better. We use a series of geometric models to fit the uv visibilities at both wavelengths with GALARIO. Although the Real visibilities show structures similar to what has been identified as gaps and rings in protoplanetary disks, we find that a modified Flat-Topped Gaussian at high inclination provides the best fit to the observations. This fit agrees well with expectations for an optically thick, highly inclined disk. Nevertheless, we find that the geometric models consistently yield positive residuals at the four corners of the disk at both wavelengths. We interpret these residuals as evidence that the disk is flared in the millimeter dust. We use a simple toy model for an edge-on flared disk and find that the residuals best match a disk with flaring that is mainly restricted to the outer disk at $R \gtrsim 30$ au. Thus, VLA 1623W may represent a young protostellar disk where the large dust grains have not yet had enough time to settle into the mid-plane. This result may have implications for how disk evolution and vertical dust settling impact the initial conditions leading to planet formation. △ Less

Submitted 28 September, 2022; v1 submitted 14 September, 2022; originally announced September 2022.

Comments: Accepted by ApJ, 12 pages, 13 figures

Enabling Under-Ice Geochemical Observations with a Size, Weight, and Power-Constrained Robot

Authors: Jess Horowitz, Victoria Preston, Anna P. M. Michel

Abstract: Estimates of greenhouse gas emissions from Arctic estuarine environments are dominated by in situ summer-time ice-free dissolved gas measurements due to the logistical ease of performing field observations in these conditions. Recent evidence in coastal Arctic environments, however, has demonstrated that dissolved methane (CH4) and carbon dioxide (CO2) are strongly seasonally variable, and at leas… ▽ More Estimates of greenhouse gas emissions from Arctic estuarine environments are dominated by in situ summer-time ice-free dissolved gas measurements due to the logistical ease of performing field observations in these conditions. Recent evidence in coastal Arctic environments, however, has demonstrated that dissolved methane (CH4) and carbon dioxide (CO2) are strongly seasonally variable, and at least one significant gas ventilation event occurs during the spring freshet. Whether the Arctic serves as a source or sink of greenhouse emissions has significant implications on modeling climate change and its feedback mechanisms. To enable higher resolution spatiotemporal measurements of dissolved gases in typically undersampled conditions, remotely operated vehicles (ROVs) can be used to extract near continuous water samples below ice before and during the spring freshet. Here, we present a size, weight, and power-constrained (SWAP) underwater vehicle (UV) and novel geochemical sampling system suitable for taking under-ice geochemical observations and demonstrate the proposed system in a field-analog setting for Arctic estuarine studies. △ Less

Submitted 10 September, 2022; originally announced September 2022.

Comments: 6 pages, 7 figures, OCEANS Conference 2022

Robotic Planning under Uncertainty in Spatiotemporal Environments in Expeditionary Science

Authors: Victoria Preston, Genevieve Flaspohler, Anna P. M. Michel, John W. Fisher III, Nicholas Roy

Abstract: In the expeditionary sciences, spatiotemporally varying environments -- hydrothermal plumes, algal blooms, lava flows, or animal migrations -- are ubiquitous. Mobile robots are uniquely well-suited to study these dynamic, mesoscale natural environments. We formalize expeditionary science as a sequential decision-making problem, modeled using the language of partially-observable Markov decision pro… ▽ More In the expeditionary sciences, spatiotemporally varying environments -- hydrothermal plumes, algal blooms, lava flows, or animal migrations -- are ubiquitous. Mobile robots are uniquely well-suited to study these dynamic, mesoscale natural environments. We formalize expeditionary science as a sequential decision-making problem, modeled using the language of partially-observable Markov decision processes (POMDPs). Solving the expeditionary science POMDP under real-world constraints requires efficient probabilistic modeling and decision-making in problems with complex dynamics and observational models. Previous work in informative path planning, adaptive sampling, and experimental design have shown compelling results, largely in static environments, using data-driven models and information-based rewards. However, these methodologies do not trivially extend to expeditionary science in spatiotemporal environments: they generally do not make use of scientific knowledge such as equations of state dynamics, they focus on information gathering as opposed to scientific task execution, and they make use of decision-making approaches that scale poorly to large, continuous problems with long planning horizons and real-time operational constraints. In this work, we discuss these and other challenges related to probabilistic modeling and decision-making in expeditionary science, and present some of our preliminary work that addresses these gaps. We ground our results in a real expeditionary science deployment of an autonomous underwater vehicle (AUV) in the deep ocean for hydrothermal vent discovery and characterization. Our concluding thoughts highlight remaining work to be done, and the challenges that merit consideration by the reinforcement learning and decision-making community. △ Less

Submitted 2 June, 2022; originally announced June 2022.

Comments: 5 pages, 1 figure, as submitted to The Multi-disciplinary Conference on Reinforcement Learning and Decision Making

Convolutional Neural Network Modelling for MODIS Land Surface Temperature Super-Resolution

Authors: Binh Minh Nguyen, Ganglin Tian, Minh-Triet Vo, Aurélie Michel, Thomas Corpetti, Carlos Granero-Belinchon

Abstract: Nowadays, thermal infrared satellite remote sensors enable to extract very interesting information at large scale, in particular Land Surface Temperature (LST). However such data are limited in spatial and/or temporal resolutions which prevents from an analysis at fine scales. For example, MODIS satellite provides daily acquisitions with 1Km spatial resolutions which is not sufficient to deal with… ▽ More Nowadays, thermal infrared satellite remote sensors enable to extract very interesting information at large scale, in particular Land Surface Temperature (LST). However such data are limited in spatial and/or temporal resolutions which prevents from an analysis at fine scales. For example, MODIS satellite provides daily acquisitions with 1Km spatial resolutions which is not sufficient to deal with highly heterogeneous environments as agricultural parcels. Therefore, image super-resolution is a crucial task to better exploit MODIS LSTs. This issue is tackled in this paper. We introduce a deep learning-based algorithm, named Multi-residual U-Net, for super-resolution of MODIS LST single-images. Our proposed network is a modified version of U-Net architecture, which aims at super-resolving the input LST image from 1Km to 250m per pixel. The results show that our Multi-residual U-Net outperforms other state-of-the-art methods. △ Less

Submitted 1 April, 2022; v1 submitted 22 February, 2022; originally announced February 2022.

Experiments conducted in the burning plasma regime with inertial fusion implosions

Authors: J. S. Ross, J. E. Ralph, A. B. Zylstra, A. L. Kritcher, H. F. Robey, C. V. Young, O. A. Hurricane, D. A. Callahan, K. L. Baker, D. T. Casey, T. Doeppner, L. Divol, M. Hohenberger, S. Le Pape, A. Pak, P. K. Patel, R. Tommasini, S. J. Ali, P. A. Amendt, L. J. Atherton, B. Bachmann, D. Bailey, L. R. Benedetti, L. Berzak Hopkins, R. Betti , et al. (127 additional authors not shown)

Abstract: An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into… ▽ More An experimental program is currently underway at the National Ignition Facility (NIF) to compress deuterium and tritium (DT) fuel to densities and temperatures sufficient to achieve fusion and energy gain. The primary approach being investigated is indirect drive inertial confinement fusion (ICF), where a high-Z radiation cavity (a hohlraum) is heated by lasers, converting the incident energy into x-ray radiation which in turn drives the DT fuel filled capsule causing it to implode. Previous experiments reported DT fuel gain exceeding unity [O.A. Hurricane et al., Nature 506, 343 (2014)] and then exceeding the kinetic energy of the imploding fuel [S. Le Pape et al., Phys. Rev. Lett. 120, 245003 (2018)]. We report on recent experiments that have achieved record fusion neutron yields on NIF, greater than 100 kJ with momentary fusion powers exceeding 1PW, and have for the first time entered the burning plasma regime where fusion alpha-heating of the fuel exceeds the energy delivered to the fuel via compression. This was accomplished by increasing the size of the high-density carbon (HDC) capsule, increasing energy coupling, while controlling symmetry and implosion design parameters. Two tactics were successful in controlling the radiation flux symmetry and therefore the implosion symmetry: transferring energy between laser cones via plasma waves, and changing the shape of the hohlraum. In conducting these experiments, we controlled for known sources of degradation. Herein we show how these experiments were performed to produce record performance, and demonstrate the data fidelity leading us to conclude that these shots have entered the burning plasma regime. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Bridging the gap between protoplanetary and debris disks: separate evolution of millimeter and micrometer-sized dust

Authors: Arnaud Michel, Nienke van der Marel, Brenda Matthews

Abstract: The connection between the nature of a protoplanetary disk and that of a debris disk is not well understood. Dust evolution, planet formation, and disk dissipation likely play a role in the processes involved. We aim to reconcile both manifestations of dusty circumstellar disks through a study of optically thin Class III disks and how they correlate to younger and older disks. In this work, we col… ▽ More The connection between the nature of a protoplanetary disk and that of a debris disk is not well understood. Dust evolution, planet formation, and disk dissipation likely play a role in the processes involved. We aim to reconcile both manifestations of dusty circumstellar disks through a study of optically thin Class III disks and how they correlate to younger and older disks. In this work, we collect literature and ALMA archival millimeter fluxes for 85 disks (8%) of all Class III disks across nearby star-forming regions. We derive millimeter-dust masses $M_{\text{dust}}$ and compare these with Class II and debris disk samples in the context of excess infrared luminosity, accretion rate, and age. The mean $M_{\text{dust}}$ of Class III disks is $0.29 \pm 0.19~M_{\oplus}$. We propose a new evolutionary scenario wherein radial drift is very efficient for non-structured disks during the Class II phase resulting in a rapid decrease of $M_{\text{dust}}$. However, we find long infrared protoplanetary disk timescales of ${\sim}$8~Myr, which are consistent with overall slow disk evolution. In structured disks, the presence of dust traps allows for the formation of planetesimal belts at large radii, such as those observed in debris disks. We propose therefore that the planetesimal belts in debris disks are the result of dust traps in structured disks, whereas protoplanetary disks without dust traps decrease in dust mass through radial drift and are therefore undetectable as debris disks after the gas has dissipated. These results provide a hypothesis for a novel view of disk evolution. △ Less

Submitted 31 July, 2021; v1 submitted 12 April, 2021; originally announced April 2021.

Comments: Accepted by ApJ, 20 pages, 13 figures. YouTube presentation (~10 minutes) on results here: https://youtu.be/NOVE9-a2kWU

Torsion theories and coverings of V-groups

Authors: Aline Michel

Abstract: For a commutative, unital and integral quantale V, we generalize to V-groups the results developed by Gran and Michel for preordered groups. We first of all show that, in the category V-Grp of V-groups, there exists a torsion theory whose torsion and torsion-free subcategories are given by those of indiscrete and separated V-groups, respectively. It turns out that this torsion theory induces a mon… ▽ More For a commutative, unital and integral quantale V, we generalize to V-groups the results developed by Gran and Michel for preordered groups. We first of all show that, in the category V-Grp of V-groups, there exists a torsion theory whose torsion and torsion-free subcategories are given by those of indiscrete and separated V-groups, respectively. It turns out that this torsion theory induces a monotone-light factorization system that we characterize, and it is then possible to describe the coverings in V-Grp. We next classify these coverings as internal actions of a Galois groupoid. Finally, we observe that the subcategory of separated V-groups is also a torsion-free subcategory for a pretorsion theory whose torsion subcategory is the one of symmetric V-groups. As recently proved by Clementino and Montoli, this latter category is actually not only coreflective, as it is the case for any torsion subcategory, but also reflective. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Comments: 21 pages

Estimating black hole masses in obscured AGN using X-rays

Authors: Mario Gliozzi, James K. Williams, Dina A. Michel

Abstract: Determining the black hole masses in active galactic nuclei (AGN) is of crucial importance to constrain the basic characteristics of their central engines and shed light on their growth and co-evolution with their host galaxies. While the black hole mass (MBH) can be robustly measured with dynamical methods in bright type 1 AGN, where the variable primary emission and the broad line region (BLR) a… ▽ More Determining the black hole masses in active galactic nuclei (AGN) is of crucial importance to constrain the basic characteristics of their central engines and shed light on their growth and co-evolution with their host galaxies. While the black hole mass (MBH) can be robustly measured with dynamical methods in bright type 1 AGN, where the variable primary emission and the broad line region (BLR) are directly observed, a direct measurement is considerably more challenging if not impossible for the vast majority of heavily obscured type 2 AGN. In this work, we tested the validity of an X-ray-based scaling method to constrain the MBH in heavily absorbed AGN. To this end, we utilized a sample of type 2 AGN with good-quality hard X-ray data obtained by the nuSTAR satellite and with MBH dynamically constrained from megamaser measurements. Our results indicate that, when the X-ray broadband spectra are fitted with physically motivated self-consistent models that properly account for absorption, scattering, and emission line contributions from the putative torus and constrain the primary X-ray emission, then the X-ray scaling method yields MBH values that are consistent with those determined from megamaser measurements within their respective uncertainties. With this method we can therefore systematically determine the MBH in any type 2 AGN, provided that they possess good-quality X-ray data and accrete at a moderate to high rate. △ Less

Submitted 19 January, 2021; originally announced January 2021.

Comments: 15 pages, 6 figures, 5 tables, accepted for publication in MNRAS

Phase Transitions in Germanium Telluride Nanoparticle Phase-Change Materials Studied by Time-Resolved X-Ray Diffraction

Authors: Ann-Katrin U. Michel, Felix Donat, Aurelia Siegfried, Olesya Yarema, Hanbing Fang, Maksym Yarema, Vanessa Wood, Christoph R. Müller, David J. Norris

Abstract: Germanium telluride (GeTe), a phase-change material, is known to exhibit four different structural phases: three at room temperature (one amorphous and two crystalline, $α$ and $γ$) and one at high temperature (crystalline $β$). Because transitions between the amorphous and crystalline phases lead to significant changes in material properties (e.g., refractive index and resistivity), GeTe has been… ▽ More Germanium telluride (GeTe), a phase-change material, is known to exhibit four different structural phases: three at room temperature (one amorphous and two crystalline, $α$ and $γ$) and one at high temperature (crystalline $β$). Because transitions between the amorphous and crystalline phases lead to significant changes in material properties (e.g., refractive index and resistivity), GeTe has been investigated as a phase-change material for photonics, thermoelectrics, ferroelectrics, and spintronics. Consequently, the temperature-dependent phase transitions in GeTe have been studied for bulk and thin-film GeTe, both fabricated by sputtering. Colloidal synthesis of nanoparticles offers a more flexible fabrication approach for amorphous and crystalline GeTe. These nanoparticles are known to exhibit size-dependent properties, such as an increased crystallization temperature for the amorphous-to-$α$ transition in sub-10\,nm GeTe particles. The $α$-to-$β$ phase transition is also expected to vary with size, but this effect has not yet been investigated for GeTe. Here, we report time-resolved X-ray diffraction of GeTe nanoparticles with different diameters and from different synthetic protocols. We observe a non-volatile amorphous-to-$α$ transition between 210$^{\circ}$C and 240$^{\circ}$C and a volatile $α$-to-$β$ transition between 370$^{\circ}$C and 420$^{\circ}$C. The latter transition was reversible and repeatable. While the transition temperatures are shifted relative to the values known for bulk GeTe, the nanoparticle-based samples still exhibit the same structural phases reported for sputtered GeTe. Thus, colloidal GeTe maintains the same general phase behavior as bulk GeTe while allowing for more flexible and accessible fabrication. Therefore, nanoparticle-based GeTe films show great potential for applications, such as in active photonics. △ Less

Submitted 20 November, 2020; originally announced November 2020.

The Potential of Combining Thermal Scanning Probes and Phase-Change Materials for Tunable Metasurfaces

Authors: Ann-Katrin U. Michel, Sebastian Meyer, Nicolas Essing, Nolan Lassaline, Carin R. Lightner, Samuel Bisig, David J. Norris, Dmitry N. Chigrin

Abstract: Metasurfaces allow for the spatiotemporal variation of amplitude, phase, and polarization of optical wavefronts. Implementation of active tunability of metasurfaces promises compact flat optics capable of reconfigurable wavefront sha**. Phase-change materials (PCMs), such as germanium telluride or germanium antimony telluride, are a prominent material class enabling reconfigurable metasurfaces d… ▽ More Metasurfaces allow for the spatiotemporal variation of amplitude, phase, and polarization of optical wavefronts. Implementation of active tunability of metasurfaces promises compact flat optics capable of reconfigurable wavefront sha**. Phase-change materials (PCMs), such as germanium telluride or germanium antimony telluride, are a prominent material class enabling reconfigurable metasurfaces due to their large refractive index change upon structural transition. However, commonly employed laser-induced switching of PCMs limits the achievable feature sizes and thus, restricts device miniaturization. Here, we propose thermal scanning-probe-induced local switching of germanium telluride to realize near-infrared metasurfaces with feature sizes far below what is achievable with diffraction-limited optical switching. Our design is based on a planar multilayer stack and does not require fabrication of protruding dielectric or metallic resonators as commonly applied in the literature. Instead, we numerically demonstrate that a broad-band tuning of perfect absorption could be realized by the localized and controlled tip-induced crystallization of the PCM layer. The spectral response of the metasurface is explained using simple resonance mode analysis and numerical simulations. To facilitate experimental realization, we provide a detailed theoretical description of the tip-induced crystallization employing multiphysics simulations to demonstrate the great potential for fabricating compact reconfigurable metasurfaces. Our concept allows for tunable perfect absorption and can be applied not only for thermal imaging or sensing, but also for spatial frequency filtering. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Comments: 7 pages, 4 figures

Planetary mass-radius relations across the galaxy

Authors: A. Michel, J. Haldemann, C. Mordasini, Y. Alibert

Abstract: Planet formation theory suggests that planet bulk compositions are likely to reflect the chemical abundance ratios of their host star's photosphere. Variations in the abundance of particular chemical species in stellar photospheres between different galactic stellar populations demonstrate that there are differences among the expected solid planet bulk compositions. We aim to present planetary mas… ▽ More Planet formation theory suggests that planet bulk compositions are likely to reflect the chemical abundance ratios of their host star's photosphere. Variations in the abundance of particular chemical species in stellar photospheres between different galactic stellar populations demonstrate that there are differences among the expected solid planet bulk compositions. We aim to present planetary mass-radius relations of solid planets for kinematically differentiated stellar populations, namely, the thin disc, thick disc, and halo. Using two separate internal structure models, we generated synthetic planets using bulk composition inputs derived from stellar abundances. We explored two scenarios, specifically iron-silicate planets at 0.1 AU and silicate-iron-water planets at 4 AU. We show that there is a persistent statistical difference in the expected mass-radius relations of solid planets among the different galactic stellar populations. At 0.1 AU for silicate-iron planets, there is a 1.51 to 2.04\% mean planetary radius difference between the thick and thin disc stellar populations, whilst for silicate-iron-water planets past the ice line at 4 AU, we calculate a 2.93 to 3.26\% difference depending on the models. Between the halo and thick disc, we retrieve at 0.1 AU a 0.53 to 0.69\% mean planetary radius difference, and at 4 AU we find a 1.24 to 1.49\% difference depending on the model. Future telescopes (such as PLATO) will be able to precisely characterize solid exoplanets and demonstrate the possible existence of planetary mass-radius relationship variability between galactic stellar populations. △ Less

Submitted 9 June, 2020; v1 submitted 5 June, 2020; originally announced June 2020.

Comments: 11 pages, 9 figures, accepted for publication in Astronomy & Astrophysics

Journal ref: A&A 639, A66 (2020)

Torsion theories and coverings of preordered groups

Authors: Marino Gran, Aline Michel

Abstract: In this article we explore a non-abelian torsion theory in the category of preordered groups: the objects of its torsion-free subcategory are the partially ordered groups, whereas the objects of the torsion subcategory are groups (with the total order). The reflector from the category of preordered groups to this torsion-free subcategory has stable units, and we prove that it induces a monotone-li… ▽ More In this article we explore a non-abelian torsion theory in the category of preordered groups: the objects of its torsion-free subcategory are the partially ordered groups, whereas the objects of the torsion subcategory are groups (with the total order). The reflector from the category of preordered groups to this torsion-free subcategory has stable units, and we prove that it induces a monotone-light factorization system. We describe the coverings relative to the Galois structure naturally associated with this reflector, and explain how these coverings can be classified as internal actions of a Galois groupoid. Finally, we prove that in the category of preordered groups there is also a pretorsion theory, whose torsion subcategory can be identified with a category of internal groups. This latter is precisely the subcategory of protomodular objects in the category of preordered groups, as recently discovered by Clementino, Martins-Ferreira, and Montoli. △ Less

Submitted 29 December, 2020; v1 submitted 16 May, 2020; originally announced May 2020.

Comments: 21 pages, minor changes and improvements

MSC Class: 18E40; 18E50; 06F15; 18A40

Journal ref: Algebra Universalis 82, 22, 2021

Spectrally-resolved dielectric function of amorphous and crystalline GeTe nanoparticle thin films

Authors: Ann-Katrin U. Michel, Marilyne Sousa, Maksym Yarema, Olesya Yarema, Vladimir Ovuka, Nolan Lassaline, Vanessa Wood, David J. Norris

Abstract: Phase-change materials (PCMs), which are well-established in optical and random-access memories, are increasingly studied for emerging topics such as brain-inspired computing and active photonics. These applications take advantage of the pronounced reflectivity and resistivity changes that accompany the structural transition in PCMs from their amorphous to crystalline state. However, PCMs are typi… ▽ More Phase-change materials (PCMs), which are well-established in optical and random-access memories, are increasingly studied for emerging topics such as brain-inspired computing and active photonics. These applications take advantage of the pronounced reflectivity and resistivity changes that accompany the structural transition in PCMs from their amorphous to crystalline state. However, PCMs are typically fabricated as thin films via sputtering, which is costly, requires advanced equipment, and limits the sample and device design. Here, we investigate a simpler and more flexi-ble approach for applications in tunable photonics: the use of sub-10 nm colloidal PCM nanoparticles (NPs). We report the optical properties of amorphous and crystalline germanium telluride (GeTe) NP thin films from the infrared to the ultraviolet spectral range. Using spectroscopic ellipsometry with support from cross-sectional scanning electron microscopy, atomic force microscopy, and absorption spectroscopy, we extract refractive indices n, extinction coefficients k, and band gaps Eg and compare to values known for sputtered GeTe thin films. We find a decrease of n and k and an increase of Eg for NP-based GeTe films, yielding insights into size-dependent property changes for nanoscale PCMs. Furthermore, our results reveal the suitability of GeTe NPs for tunable photonics in the near-infrared and visible spectral range. Finally, we studied sample reproducibility and aging of our NP films. We found that the colloidally-prepared PCM thin films were stable for at least two months stored under nitrogen, further supporting the great promise of these materials in applications. △ Less

Submitted 4 February, 2020; originally announced February 2020.

Comments: Optical Materials Engineering Laboratory, ETH Zurich, 8092 Zurich, Switzerland. IBM Research-Zurich, Rüschlikon, Switzerland. Materials and Device Engineering Group, Department of Information Technology and Electrical Engineering, ETH Zurich, 8092 Zurich, Switzerland

Monte Carlo radiative transfer for the nebular phase of Type Ia supernovae

Authors: L. J. Shingles, S. A. Sim, M. Kromer, K. Maguire, M. Bulla, C. Collins, C. P. Ballance, A. S. Michel, C. A. Ramsbottom, F. K. Roepke, I. R. Seitenzahl, N. B. Tyndall

Abstract: We extend the range of validity of the ARTIS 3D radiative transfer code up to hundreds of days after explosion, when Type Ia supernovae are in their nebular phase. To achieve this, we add a non-local thermodynamic equilibrium (non-LTE) population and ionisation solver, a new multi-frequency radiation field model, and a new atomic dataset with forbidden transitions. We treat collisions with non-the… ▽ More We extend the range of validity of the ARTIS 3D radiative transfer code up to hundreds of days after explosion, when Type Ia supernovae are in their nebular phase. To achieve this, we add a non-local thermodynamic equilibrium (non-LTE) population and ionisation solver, a new multi-frequency radiation field model, and a new atomic dataset with forbidden transitions. We treat collisions with non-thermal leptons resulting from nuclear decays to account for their contribution to excitation, ionisation, and heating. We validate our method with a variety of tests including comparing our synthetic nebular spectra for the well-known one-dimensional W7 model with the results of other studies. As an illustrative application of the code, we present synthetic nebular spectra for the detonation of a sub-Chandrasekhar white dwarf in which the possible effects of gravitational settling of Ne22 prior to explosion have been explored. Specifically, we compare synthetic nebular spectra for a 1.06 M$_\odot$ white dwarf model obtained when 5.5 Gyr of very-efficient settling is assumed to a similar model without settling. We find that this degree of Ne22 settling has only a modest effect on the resulting nebular spectra due to increased Ni58 abundance. Due to the high ionisation in sub-Chandrasekhar models, the nebular [Ni II] emission remains negligible, while the [Ni III] line strengths are increased and the overall ionisation balance is slightly lowered in the model with Ne22 settling. In common with previous studies of sub-Chandrasekhar models at nebular epochs, these models overproduce [Fe III] emission relative to [Fe II] in comparison to observations of normal Type Ia supernovae. △ Less

Submitted 4 December, 2019; originally announced December 2019.

Comments: 15 pages, 12 figures. Accepted for publication by MNRAS

Journal ref: Monthly Notices of the Royal Astronomical Society, Volume 492, Issue 2, February 2020, Pages 2029-2043

Characterization of a plasma window as a membrane free transition between vacuum and high pressure

Authors: B. F. Bohlender, A. Michel, J. Jacoby, M. Iberler, O. Kester

Abstract: A plasma window (PW) is a device for separating two areas of different pressures while letting particle beams pass with little to no loss. It has been introduced by A. Hershcovitch. In the course of this publication, the properties of a PW with apertures of 3.3 mm and 5.0 mm are presented. Especially the link between the pressure properties relevant for applications in accelerator systems and the… ▽ More A plasma window (PW) is a device for separating two areas of different pressures while letting particle beams pass with little to no loss. It has been introduced by A. Hershcovitch. In the course of this publication, the properties of a PW with apertures of 3.3 mm and 5.0 mm are presented. Especially the link between the pressure properties relevant for applications in accelerator systems and the underlying plasma properties depending on external parameters are presented. At the low pressure side around some mbar, high-pressure values reached up to 750 mbar while operating with volume flows between 1 slm and 4 slm (standard liter per minute) and discharge currents ranging from 45 A to 60 A. Unique features of the presented PW include simultaneous plasma parameter determination and the absence of ceramic insulators between the cooling plates. Optical analysis reveals no significant damage or wear to the components after an operation time well over 10 h, whereas the cathode needle needs replacement after 5 h. △ Less

Submitted 18 November, 2019; originally announced November 2019.

Comments: 7 pages, 7 figures

Journal ref: Phys. Rev. Accel. Beams 23, 013501 (2020)

Information-Guided Robotic Maximum Seek-and-Sample in Partially Observable Continuous Environments

Authors: Genevieve Flaspohler, Victoria Preston, Anna P. M. Michel, Yogesh Girdhar, Nicholas Roy

Abstract: We present PLUMES, a planner to localizing and collecting samples at the global maximum of an a priori unknown and partially observable continuous environment. The "maximum-seek-and-sample" (MSS) problem is pervasive in the environmental and earth sciences. Experts want to collect scientifically valuable samples at an environmental maximum (e.g., an oil-spill source), but do not have prior knowled… ▽ More We present PLUMES, a planner to localizing and collecting samples at the global maximum of an a priori unknown and partially observable continuous environment. The "maximum-seek-and-sample" (MSS) problem is pervasive in the environmental and earth sciences. Experts want to collect scientifically valuable samples at an environmental maximum (e.g., an oil-spill source), but do not have prior knowledge about the phenomenon's distribution. We formulate the MSS problem as a partially-observable Markov decision process (POMDP) with continuous state and observation spaces, and a sparse reward signal. To solve the MSS POMDP, PLUMES uses an information-theoretic reward heuristic with continous-observation Monte Carlo Tree Search to efficiently localize and sample from the global maximum. In simulation and field experiments, PLUMES collects more scientifically valuable samples than state-of-the-art planners in a diverse set of environments, with various platforms, sensors, and challenging real-world conditions. △ Less

Submitted 26 September, 2019; originally announced September 2019.

Comments: 8 pages, 8 figures, To appear in the proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) 2019 Macau

Journal ref: IEEE Robotics and Automation Letters (RA-L) 2019

Breaking of Lorentz Invariance in Electron-Proton Parity Violation

Authors: Alexander Michel, Marc Sher

Abstract: A popular framework for exploring Lorentz violation is the Standard Model Extension. This extension contains a large number of parameters that can be bounded in various experiments. Most studies, however, focus on the fermion or photon sector. Here, we consider Lorentz violation in the weak vector boson sector. The strongest bounds come from measurements of the asymmetry in Moller scattering. We s… ▽ More A popular framework for exploring Lorentz violation is the Standard Model Extension. This extension contains a large number of parameters that can be bounded in various experiments. Most studies, however, focus on the fermion or photon sector. Here, we consider Lorentz violation in the weak vector boson sector. The strongest bounds come from measurements of the asymmetry in Moller scattering. We study the bounds that can be obtained from future measurements of the parity violating asymmetry in deep inelastic electron-proton scattering at the EIC, the LHeC and the FCC-eh. For the FCC-eh, the bounds could be substantially improved over current bounds by including timing information. △ Less

Submitted 24 October, 2019; v1 submitted 23 September, 2019; originally announced September 2019.

Comments: 12 pages, 4 figures, version to be published in Physical Review D

Journal ref: Phys. Rev. D 100, 095011 (2019)

Thermoelectric power factor enhancement by spin-polarized currents - a nanowire case study

Authors: Anna Corinna Niemann, Tim Böhnert, Ann-Kathrin Michel, Svenja Bäßler, Bernd Gotsmann, Katalin Neuróhr, Bence Tóth, László Péter, Imre Bakonyi, Victor Vega, Victor M. Prida, Johannes Gooth, Kornelius Nielsch

Abstract: Thermoelectric (TE) measurements have been performed on the workhorses of today's data storage devices, exhibiting either the giant or the anisotropic magnetoresistance effect (GMR and AMR). The temperature-dependent (50-300 K) and magnetic field-dependent (up to 1 T) TE power factor (PF) has been determined for several Co-Ni alloy nanowires with varying Co:Ni ratios as well as for Co-Ni/Cu multil… ▽ More Thermoelectric (TE) measurements have been performed on the workhorses of today's data storage devices, exhibiting either the giant or the anisotropic magnetoresistance effect (GMR and AMR). The temperature-dependent (50-300 K) and magnetic field-dependent (up to 1 T) TE power factor (PF) has been determined for several Co-Ni alloy nanowires with varying Co:Ni ratios as well as for Co-Ni/Cu multilayered nanowires with various Cu layer thicknesses, which were all synthesized via a template-assisted electrodeposition process. A systematic investigation of the resistivity, as well as the Seebeck coefficient, is performed for Co-Ni alloy nanowires and Co-Ni/Cu multilayered nanowires. At room temperature, measured values of TE PFs up to 3.6 mWK-2m-1 for AMR samples and 2.0 mWK-2m-1 for GMR nanowires are obtained. Furthermore, the TE PF is found to increase by up to 13.1 % for AMR Co-Ni alloy nanowires and by up to 52 % for GMR Co-Ni/Cu samples in an external applied magnetic field. The magnetic nanowires exhibit TE PFs that are of the same order of magnitude as TE PFs of Bi-Sb-Se-Te based thermoelectric materials and, additionally, give the opportunity to adjust the TE power output to changing loads and hotspots through external magnetic fields. △ Less

Submitted 2 January, 2017; originally announced January 2017.

Comments: 25 pages, 5 figures

Journal ref: Advanced Electronic Materials 2 (9), Paper 1600058. (2016)

Magnetothermopower and magnetoresistance of single Co-Ni/Cu multilayered nanowires

Authors: Tim Böhnert, Anna Corinna Niemann, Ann-Kathrin Michel, Svenja Bäßler, Johannes Gooth, Bence G. Tóth, Katalin Neuróhr, László Péter, Imre Bakonyi, Victor Vega, Victor M. Prida, Kornelius Nielsch

Abstract: The magnetothermopower and the magnetoresistance of single Co Ni/Cu multilayered nan-owires with various thicknesses of the Cu spacer are investigated. Both kinds of measurement have been performed as a function of temperature (50 K to 325 K) and under applied magnetic fields perpendicular to the nanowire axis, with magnitudes up to 15 % at room temperature. A linear relation between thermopower S… ▽ More The magnetothermopower and the magnetoresistance of single Co Ni/Cu multilayered nan-owires with various thicknesses of the Cu spacer are investigated. Both kinds of measurement have been performed as a function of temperature (50 K to 325 K) and under applied magnetic fields perpendicular to the nanowire axis, with magnitudes up to 15 % at room temperature. A linear relation between thermopower S and electrical conductivity σ of the nanowires is found, with the magnetic field as an implicit variable. Combining the linear behavior of the S vs. σ and the Mott formula, the energy derivative of the resistivity has been determined. In order to extract the true nanowire materials parameters from the measured thermopower, a simple model based on the Mott formula is employed to distinguish the individual thermopower contributions of the sample. By assuming that the non-diffusive thermopower contributions of the nanowire can be neglected, it was found that the magnetic field induced changes of thermopower and resistivity are equivalent. The emphasis in the present paper is on the comparison of the magnetoresistance and magnetothermopower results and it is found that the same correlation is valid between the two sets of data for all samples, irrespective of the relative importance of the giant magnetoresistance or anisotropic magnetoresistance contributions in the various individual nanowires. △ Less

Submitted 21 December, 2016; originally announced December 2016.

Comments: 28 pages, 7 figures

Journal ref: Physical Review B 90, 165416 (2014)

Growth Route Toward III-V Multispectral Solar Cells on Silicon

Authors: C. Renard, N. Cherkashin, A. Jaffré, T. Molière, L. Vincent, A. Michel, J. Alvarez, J. P. Connolly, J. -P. Kleider, D. Mencaraglia, D. Bouchier

Abstract: To date, high efficiency multijunction solar cells have been developed on Ge or GaAs substrates for space applications, and terrestrial applications are hampered by high fabrication costs. In order to reduce this cost, we propose a breakthrough technique of III-V compound heteroepitaxy on Si substrates without generation of defects critical to PV applications. With this technique we expect to achi… ▽ More To date, high efficiency multijunction solar cells have been developed on Ge or GaAs substrates for space applications, and terrestrial applications are hampered by high fabrication costs. In order to reduce this cost, we propose a breakthrough technique of III-V compound heteroepitaxy on Si substrates without generation of defects critical to PV applications. With this technique we expect to achieve perfect integration of heterogeneous Ga1-xInxAs micro-crystals on Si substrates. In this paper, we show that this is the case for x=0. GaAs crystals were grown by Epitaxial Lateral Overgrowth on Si (100) wafers covered with a thin SiO2 nanostructured layer. The cristallographic structure of these crystals is analysed by MEB and TEM imaging. Micro-Raman and Micro-Photomuminescence spectra of GaAs crystals grown with different conditions are compared with those of a reference GaAs wafer in order to have more insight on eventual local strains and their cristallinity. This work aims at develop** building blocks to further develop a GaAs/Si tandem demonstrator with a potential conversion efficiency of 29.6% under AM1.5G spectrum without concentration, as inferred from our realistic modeling. This paper shows that Epitaxial Lateral Overgrowth has a very interesting potential to develop multijunction solar cells on silicon approaching the today 30.3% world record of a GaInP/GaAs tandem cell under the same illumination conditions, but on a costlier substrate than silicon. △ Less

Submitted 12 December, 2013; originally announced December 2013.

Comments: Preprint of the 28th EUPVSEC proceedings, September 2013, Paris, France. (5 pages)

Electrical transport and low-temperature scanning tunneling microscopy of microsoldered graphene

Authors: V. Geringer, D. Subramaniam, A. K. Michel, B. Szafranek, D. Schall, A. Georgi, T. Mashoff, D. Neumaier, M. Liebmann, M. Morgenstern

Abstract: Using the recently developed technique of microsoldering, we perform a systematic transport study of the influence of PMMA on graphene flakes revealing a do** effect of up to 3.8x10^12 1/cm^2, but a negligible influence on mobility and gate voltage induced hysteresis. Moreover, we show that the microsoldered graphene is free of contamination and exhibits a very similar intrinsic rippling as ha… ▽ More Using the recently developed technique of microsoldering, we perform a systematic transport study of the influence of PMMA on graphene flakes revealing a do** effect of up to 3.8x10^12 1/cm^2, but a negligible influence on mobility and gate voltage induced hysteresis. Moreover, we show that the microsoldered graphene is free of contamination and exhibits a very similar intrinsic rippling as has been found for lithographically contacted flakes. Finally, we demonstrate a current induced closing of the previously found phonon gap appearing in scanning tunneling spectroscopy experiments, strongly non-linear features at higher bias probably caused by vibrations of the flake and a B-field induced double peak attributed to the 0.Landau level of graphene. △ Less

Submitted 11 December, 2009; originally announced December 2009.

Comments: 8 pages, 3 figures

Journal ref: Appl. Phys. Lett. 96, 082114 (2010)

Approche logarithmique des noyaux étales sauvages des corps de nombres

Authors: Jean-François Jaulent, Alexis Michel

Abstract: We study the l-part of the the wild étale kernels WK2i(F) of an arbitary number field F for a given prime l in connection with the logarithmic l-class groups. From the logarithmic arithmetic we deduce rank formulas, periodicity and reflection theorems, triviality characterizations and various consequences. We study the l-part of the the wild étale kernels WK2i(F) of an arbitary number field F for a given prime l in connection with the logarithmic l-class groups. From the logarithmic arithmetic we deduce rank formulas, periodicity and reflection theorems, triviality characterizations and various consequences. △ Less

Submitted 7 January, 2008; originally announced January 2008.

MSC Class: 11R70 11R23

Journal ref: Journal of Number Theory 120 (2006) 72--91