-
Practical No-Switching Continuous-Variable Quantum Key Distribution with Biased Quadrature Detection
Authors:
Jiale Mi,
Yiming Bian,
Lu Fan,
Song Yu,
Yichen Zhang
Abstract:
Continuous-variable quantum key distribution protocol using coherent states and heterodyne detection, called No-Switching protocol, is widely used in practical systems due to the simple experimental setup without basis switching and easy assessment to phase information. The security of an ideal No-Switching protocol has been proved against general attacks in finite-size regime and composable secur…
▽ More
Continuous-variable quantum key distribution protocol using coherent states and heterodyne detection, called No-Switching protocol, is widely used in practical systems due to the simple experimental setup without basis switching and easy assessment to phase information. The security of an ideal No-Switching protocol has been proved against general attacks in finite-size regime and composable security framework, whose heterodyne detector consists of a beam splitter with transmittance of $50\%$ and two ideal homodyne detectors. However, the transmittance of a beam splitter is inaccurate and the two detectors always have different quantum efficiency and electronic noise, which introduce asymmetry into the heterodyne detection, and further lead to the mismatch between the ideal protocol and practical systems, thereby overestimating the secret key rate and resulting in a practical security loophole. In this paper, we close this loophole by proposing a modified No-Switching protocol with biased quadrature detection, where the asymmetry of the heterodyne detection is modeled to match the practical systems, and the security of the protocol is analyzed in asymptotic and finite-size regimes. Further, an optimization strategy is proposed to achieve the optimal secret key rate by adjusting the transmittance of the beam splitter. Simulation results show the necessity of considering the asymmetry in heterodyne detection and the effectiveness of the optimization, which provides a promising way to realize a practical secure and high-performance No-Switching system.
△ Less
Submitted 31 January, 2024;
originally announced February 2024.
-
Third order nonlinear transport properties in topological chiral antiferromagnetic semimetal CoNb3S6
Authors:
Junjian Mi,
Jialin Li,
Miaocong Li,
Sheng Xu,
Shuang Yu,
Zheng Li,
Xinyi Fan,
Huanfeng Zhu,
Qian Tao,
Linjun Li,
Zhuan Xu
Abstract:
The topology between Bloch states in reciprocal space has attracted tremendous attention in recent years. The quantum geometry of the band structure is composed of quantum metric as real part and berry curvature as imaginary part. While the Berry curvature, the Berry curvature dipole and Berry connection polarizability have been recently revealed by the first order anomalous hall, second order and…
▽ More
The topology between Bloch states in reciprocal space has attracted tremendous attention in recent years. The quantum geometry of the band structure is composed of quantum metric as real part and berry curvature as imaginary part. While the Berry curvature, the Berry curvature dipole and Berry connection polarizability have been recently revealed by the first order anomalous hall, second order and third order nonlinear Hall effect respectively, the quantum metric induced second order nonlinear transverse and longitudinal response in topological antiferromagnetic material MnBi2Te4 was only very recently reported. Here we demonstrate the similar third order nonlinear transport properties in the topological antiferromagnetic CoNb3S6. We observed that the third order nonlinear longitudinal V3ω xx increase significantly at the antiferromagnetic transition temperature TN ~ 29 K, which was probably induced by the quantum metric without time-reversal symmetry or inversion symmetry. Besides, temperature-dependent nonlinear behaviour was observed in the first order I-V curve below the Neel temperature TN, which was not reported in MnBi2Te4 and FeSn. Such nonlinear I-V behaviour hints for the possible existence of Charge Density Wave (CDW) state, which has been discovered in its sister material FeNb3S6. Simultaneously, two plateaus in the third order nonlinear longitudinal V3ω xx~ I^ω curve are observed, which is also speculated to be related with the possible CDW state. However, the genuine mechanism for the first order nonlinear I-V and its relation with the third order nonlinear transport call for more experimental investigations and theoretical interpretation. Our work provides a way to explore third harmonic nonlinear transport and interaction with magnetic order and CDW.
△ Less
Submitted 10 December, 2023;
originally announced December 2023.
-
RoKEPG: RoBERTa and Knowledge Enhancement for Prescription Generation of Traditional Chinese Medicine
Authors:
Hua Pu,
Jiacong Mi,
Shan Lu,
Jieyue He
Abstract:
Traditional Chinese medicine (TCM) prescription is the most critical form of TCM treatment, and uncovering the complex nonlinear relationship between symptoms and TCM is of great significance for clinical practice and assisting physicians in diagnosis and treatment. Although there have been some studies on TCM prescription generation, these studies consider a single factor and directly model the s…
▽ More
Traditional Chinese medicine (TCM) prescription is the most critical form of TCM treatment, and uncovering the complex nonlinear relationship between symptoms and TCM is of great significance for clinical practice and assisting physicians in diagnosis and treatment. Although there have been some studies on TCM prescription generation, these studies consider a single factor and directly model the symptom-prescription generation problem mainly based on symptom descriptions, lacking guidance from TCM knowledge. To this end, we propose a RoBERTa and Knowledge Enhancement model for Prescription Generation of Traditional Chinese Medicine (RoKEPG). RoKEPG is firstly pre-trained by our constructed TCM corpus, followed by fine-tuning the pre-trained model, and the model is guided to generate TCM prescriptions by introducing four classes of knowledge of TCM through the attention mask matrix. Experimental results on the publicly available TCM prescription dataset show that RoKEPG improves the F1 metric by about 2% over the baseline model with the best results.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
MultiModal-Learning for Predicting Molecular Properties: A Framework Based on Image and Graph Structures
Authors:
Zhuoyuan Wang,
Jiacong Mi,
Shan Lu,
Jieyue He
Abstract:
The quest for accurate prediction of drug molecule properties poses a fundamental challenge in the realm of Artificial Intelligence Drug Discovery (AIDD). An effective representation of drug molecules emerges as a pivotal component in this pursuit. Contemporary leading-edge research predominantly resorts to self-supervised learning (SSL) techniques to extract meaningful structural representations…
▽ More
The quest for accurate prediction of drug molecule properties poses a fundamental challenge in the realm of Artificial Intelligence Drug Discovery (AIDD). An effective representation of drug molecules emerges as a pivotal component in this pursuit. Contemporary leading-edge research predominantly resorts to self-supervised learning (SSL) techniques to extract meaningful structural representations from large-scale, unlabeled molecular data, subsequently fine-tuning these representations for an array of downstream tasks. However, an inherent shortcoming of these studies lies in their singular reliance on one modality of molecular information, such as molecule image or SMILES representations, thus neglecting the potential complementarity of various molecular modalities. In response to this limitation, we propose MolIG, a novel MultiModaL molecular pre-training framework for predicting molecular properties based on Image and Graph structures. MolIG model innovatively leverages the coherence and correlation between molecule graph and molecule image to execute self-supervised tasks, effectively amalgamating the strengths of both molecular representation forms. This holistic approach allows for the capture of pivotal molecular structural characteristics and high-level semantic information. Upon completion of pre-training, Graph Neural Network (GNN) Encoder is used for the prediction of downstream tasks. In comparison to advanced baseline models, MolIG exhibits enhanced performance in downstream tasks pertaining to molecular property prediction within benchmark groups such as MoleculeNet Benchmark Group and ADMET Benchmark Group.
△ Less
Submitted 19 April, 2024; v1 submitted 28 November, 2023;
originally announced November 2023.
-
ACDNet: Attention-guided Collaborative Decision Network for Effective Medication Recommendation
Authors:
Jiacong Mi,
Yi Zu,
Zhuoyuan Wang,
Jieyue He
Abstract:
Medication recommendation using Electronic Health Records (EHR) is challenging due to complex medical data. Current approaches extract longitudinal information from patient EHR to personalize recommendations. However, existing models often lack sufficient patient representation and overlook the importance of considering the similarity between a patient's medication records and specific medicines.…
▽ More
Medication recommendation using Electronic Health Records (EHR) is challenging due to complex medical data. Current approaches extract longitudinal information from patient EHR to personalize recommendations. However, existing models often lack sufficient patient representation and overlook the importance of considering the similarity between a patient's medication records and specific medicines. Therefore, an Attention-guided Collaborative Decision Network (ACDNet) for medication recommendation is proposed in this paper. Specifically, ACDNet utilizes attention mechanism and Transformer to effectively capture patient health conditions and medication records by modeling their historical visits at both global and local levels. ACDNet also employs a collaborative decision framework, utilizing the similarity between medication records and medicine representation to facilitate the recommendation process. The experimental results on two extensive medical datasets, MIMIC-III and MIMIC-IV, clearly demonstrate that ACDNet outperforms state-of-the-art models in terms of Jaccard, PR-AUC, and F1 score, reaffirming its superiority. Moreover, the ablation experiments provide solid evidence of the effectiveness of each module in ACDNet, validating their contribution to the overall performance. Furthermore, a detailed case study reinforces the effectiveness of ACDNet in medication recommendation based on EHR data, showcasing its practical value in real-world healthcare scenarios.
△ Less
Submitted 26 September, 2023; v1 submitted 6 July, 2023;
originally announced July 2023.
-
Ultrasound cavitation and exfoliation dynamics of 2D materials re-vealed in operando by X-ray free electron laser megahertz imaging
Authors:
Kang Xiang,
Shi Huang,
Hongyuan Song,
Vasilii Bazhenov,
Valerio Bellucci,
Sarlota Birnsteinova,
Raphael de Wijn,
Jayanath C. P. Koliyadu,
Faisal H. M. Koua,
Adam Round,
Ekaterina Round,
Abhisakh Sarma,
Tokushi Sato,
Marcin Sikorski,
Yuhe Zhang,
Eleni Myrto Asimakopoulou,
Pablo Villanueva-Perez,
Kyriakos Porfyrakis,
Iakovos Tzanakis,
Dmitry G. Eskin,
Nicole Grobert,
Adrian Mancuso,
Richard Bean,
Patrik Vagovic,
Jiawei Mi
Abstract:
Ultrasonic liquid phase exfoliation is a promising method for the production of two-dimensional (2D) layered materials. A large number of studies have been made in investigating the underlying ultrasound exfoliation mechanisms. However, due to the experimental challenges for capturing the highly transient and dynamic phenomena in real-time at sub-microsecond time and micrometer length scales simul…
▽ More
Ultrasonic liquid phase exfoliation is a promising method for the production of two-dimensional (2D) layered materials. A large number of studies have been made in investigating the underlying ultrasound exfoliation mechanisms. However, due to the experimental challenges for capturing the highly transient and dynamic phenomena in real-time at sub-microsecond time and micrometer length scales simultaneously, most theories reported to date still remain elusive. Here, using the ultra-short X-ray Free Electron Laser pulses (~25ps) with a unique pulse train structure, we applied MHz X-ray Microscopy and machine-learning technique to reveal unambiguously the full cycles of the ultrasound cavitation and graphite layer exfoliation dynamics with sub-microsecond and micrometer resolution. Cyclic fatigue shock wave impacts produced by ultrasound cloud implosion were identified as the dominant mechanism to deflect and exfoliate graphite layers mechanically. For the graphite flakes, exfoliation rate as high as ~5 angstroms per shock wave impact was observed. For the HOPG graphite, the highest exfoliation rate was ~0.15 angstroms per impact. These new findings are scientifically and technologically important for develo** industrial upscaling strategies for ultrasonic exfoliation of 2D materials.
△ Less
Submitted 23 June, 2023; v1 submitted 15 May, 2023;
originally announced May 2023.
-
An Incomplete Tensor Tucker decomposition based Traffic Speed Prediction Method
Authors:
Jiajia Mi
Abstract:
In intelligent transport systems, it is common and inevitable with missing data. While complete and valid traffic speed data is of great importance to intelligent transportation systems. A latent factorization-of-tensors (LFT) model is one of the most attractive approaches to solve missing traffic data recovery due to its well-scalability. A LFT model achieves optimization usually via a stochastic…
▽ More
In intelligent transport systems, it is common and inevitable with missing data. While complete and valid traffic speed data is of great importance to intelligent transportation systems. A latent factorization-of-tensors (LFT) model is one of the most attractive approaches to solve missing traffic data recovery due to its well-scalability. A LFT model achieves optimization usually via a stochastic gradient descent (SGD) solver, however, the SGD-based LFT suffers from slow convergence. To deal with this issue, this work integrates the unique advantages of the proportional-integral-derivative (PID) controller into a Tucker decomposition based LFT model. It adopts two-fold ideas: a) adopting tucker decomposition to build a LFT model for achieving a better recovery accuracy. b) taking the adjusted instance error based on the PID control theory into the SGD solver to effectively improve convergence rate. Our experimental studies on two major city traffic road speed datasets show that the proposed model achieves significant efficiency gain and highly competitive prediction accuracy.
△ Less
Submitted 21 April, 2023;
originally announced April 2023.
-
An ADMM-Incorporated Latent Factorization of Tensors Method for QoS Prediction
Authors:
Jiajia Mi,
Hao Wu
Abstract:
As the Internet developed rapidly, it is important to choose suitable web services from a wide range of candidates. Quality of service (QoS) describes the performance of a web service dynamically with respect to the service requested by the service consumer. Moreover, the latent factorization of tenors (LFT) is very effective for discovering temporal patterns in high dimensional and sparse (HiDS)…
▽ More
As the Internet developed rapidly, it is important to choose suitable web services from a wide range of candidates. Quality of service (QoS) describes the performance of a web service dynamically with respect to the service requested by the service consumer. Moreover, the latent factorization of tenors (LFT) is very effective for discovering temporal patterns in high dimensional and sparse (HiDS) tensors. However, current LFT models suffer from a low convergence rate and rarely account for the effects of outliers. To address the above problems, this paper proposes an Alternating direction method of multipliers (ADMM)-based Outlier-Resilient Nonnegative Latent-factorization of Tensors model. We maintain the non-negativity of the model by constructing an augmented Lagrangian function with the ADMM optimization framework. In addition, the Cauchy function is taken as the metric function to reduce the impact on the model training. The empirical work on two dynamic QoS datasets shows that the proposed method has faster convergence and better performance on prediction accuracy.
△ Less
Submitted 3 December, 2022;
originally announced December 2022.
-
Omni-Roach: A legged robot capable of traversing multiple types of large obstacles and self-righting
Authors:
Jonathan Mi,
Yaqing Wang,
Chen Li
Abstract:
Robots excel at avoiding obstacles but struggle to traverse complex 3-D terrain with cluttered large obstacles. By contrast, insects like cockroaches excel at doing so. Recent research in our lab elucidated how locomotor transitions emerge from locomotor-environment interaction for diverse locomotor challenges abstracted from complex 3-D terrain and the strategies to overcome them. Here we built o…
▽ More
Robots excel at avoiding obstacles but struggle to traverse complex 3-D terrain with cluttered large obstacles. By contrast, insects like cockroaches excel at doing so. Recent research in our lab elucidated how locomotor transitions emerge from locomotor-environment interaction for diverse locomotor challenges abstracted from complex 3-D terrain and the strategies to overcome them. Here we built on these fundamental insights to develop a cockroach-inspired legged robot, Omni-Roach, that integrated these strategies to achieve multi-modal locomotion and provide a robophysical model to study the trade-off between multi-functionality and performance. The robot was based on the RHex design with six compliant legs and featured a rounded body with two wings that can open and a tail with pitch and yaw degrees of freedom. After two development and testing iterations, our robot was capable of overcoming all locomotor challenges with a high performance and success rate. It traversed cluttered rigid pillars only 1.1x robot body width apart, a 2.5x hip height bump, a 0.75x body length gap, densely cluttered flexible beams only 65% body width apart, and self-righted within 4 seconds. Systematic beam traversal experiments further revealed that a downward-pointing tail oscillating laterally helps roll the body into beam gaps and break frictional and interlocking contact to traverse. Our work highlights the usefulness of multi-functional appendages and exaptation for large obstacle traversal.
△ Less
Submitted 6 March, 2022; v1 submitted 15 December, 2021;
originally announced December 2021.
-
Possible Dirac quantum spin liquid in a kagome quantum antiferromagnet YCu$_3$(OH)$_6$Br$_2$[Br$_{x}$(OH)$_{1-x}$]
Authors:
Zhenyuan Zeng,
Xiaoyan Ma,
Si Wu,
Hai-Feng Li,
Zhen Tao,
Xingye Lu,
Xiao-hui Chen,
**-Xiao Mi,
Shi-Jie Song,
Guang-Han Cao,
Guangwei Che,
Kuo Li,
Gang Li,
Huiqian Luo,
Zi Yang Meng,
Shiliang Li
Abstract:
We studied the magnetic properties of YCu$_3$(OH)$_6$Br$_2$[Br$_{1-x}$(OH)$_{x}$] ($x$ = 0.33), where Cu$^{2+}$ ions form two-dimensional kagome layers. There is no magnetic order down to 50 mK while the Curie-Weiss temperature is on the order of -100 K. At zero magnetic field, the low-temperature specific heat shows a $T^2$ dependence. Above 2 T, a linear temperature dependence term in specific h…
▽ More
We studied the magnetic properties of YCu$_3$(OH)$_6$Br$_2$[Br$_{1-x}$(OH)$_{x}$] ($x$ = 0.33), where Cu$^{2+}$ ions form two-dimensional kagome layers. There is no magnetic order down to 50 mK while the Curie-Weiss temperature is on the order of -100 K. At zero magnetic field, the low-temperature specific heat shows a $T^2$ dependence. Above 2 T, a linear temperature dependence term in specific heat emerges, and the value of $γ= C/T$ increases linearly with the field. Furthermore, the magnetic susceptibility tends to a constant value at $T = 0$. Our results suggest that the magnetic ground state of YCu$_3$(OH)$_6$Br$_2$[Br$_{1-x}$(OH)$_{x}$] is consistent with a Dirac quantum-spin-liquid state with a linearly dispersing spinon strongly coupled to an emergent gauge field, which has long been theoretically proposed as a candidate ground state in the two-dimensional kagome Heisenberg antiferromagnetic system.
△ Less
Submitted 15 March, 2022; v1 submitted 25 July, 2021;
originally announced July 2021.
-
Optical manipulation of Rashba-split 2-Dimensional Electron Gas
Authors:
M. Michiardi,
F. Boschini,
H. -H. Kung,
M. X. Na,
S. K. Y. Dufresne,
A. Currie,
G. Levy,
S. Zhdanovich,
A. K. Mills,
D. J. Jones,
J. L. Mi,
B. B. Iversen,
Ph. Hofmann,
A. Damascelli
Abstract:
In spintronic devices, the two main approaches to actively control the electrons' spin degree of freedom involve either static magnetic or electric fields. An alternative avenue relies on the application of optical fields to generate spin currents, which promises to bolster spin-device performance allowing for significantly faster and more efficient spin logic. To date, research has mainly focused…
▽ More
In spintronic devices, the two main approaches to actively control the electrons' spin degree of freedom involve either static magnetic or electric fields. An alternative avenue relies on the application of optical fields to generate spin currents, which promises to bolster spin-device performance allowing for significantly faster and more efficient spin logic. To date, research has mainly focused on the optical injection of spin currents through the photogalvanic effect, and little is known about the direct optical control of the intrinsic spin splitting. Here, to explore the all-optical manipulation of a material's spin properties, we consider the Rashba effect at a semiconductor interface. The Rashba effect has long been a staple in the field of spintronics owing to its superior tunability, which allows the observation of fully spin-dependent phenomena, such as the spin-Hall effect, spin-charge conversion, and spin-torque in semiconductor devices. In this work, by means of time and angle-resolved photoemission spectroscopy (TR-ARPES), we demonstrate that an ultrafast optical excitation can be used to manipulate the Rashba-induced spin splitting of a two-dimensional electron gas (2DEG) engineered at the surface of the topological insulator Bi$_{2}$Se$_{3}$. We establish that light-induced photovoltage and charge carrier redistribution -- which in concert modulate the spin-orbit coupling strength on a sub-picosecond timescale -- can offer an unprecedented platform for achieving all optically-driven THz spin logic devices.
△ Less
Submitted 2 June, 2022; v1 submitted 19 May, 2021;
originally announced May 2021.
-
Magnetic ordering of the distorted kagome antiferromagnet Y$_3$Cu$_9$(OH)$_{18}$[Cl$_8$(OH)] prepared via optimal synthesis
Authors:
W. Sun,
T. Arh,
M. Gomilšek,
P. Koželj,
S. Vrtnik,
M. Herak,
J. -X. Mi,
A. Zorko
Abstract:
Experimental studies of high-purity kagome-lattice antiferromagnets (KAFM) are of great importance in attempting to better understand the predicted enigmatic quantum spin-liquid ground state of the KAFM model. However, realizations of this model can rarely evade magnetic ordering at low temperatures due to various perturbations to its dominant isotropic exchange interactions. Such a situation is f…
▽ More
Experimental studies of high-purity kagome-lattice antiferromagnets (KAFM) are of great importance in attempting to better understand the predicted enigmatic quantum spin-liquid ground state of the KAFM model. However, realizations of this model can rarely evade magnetic ordering at low temperatures due to various perturbations to its dominant isotropic exchange interactions. Such a situation is for example encountered due to sizable Dzyaloshinskii-Moriya magnetic anisotropy in YCu$_3$(OH)$_6$Cl$_3$, which stands out from other KAFM materials by its perfect crystal structure. We find evidence of magnetic ordering also in the distorted sibling compound Y$_3$Cu$_9$(OH)$_{18}$[Cl$_8$(OH)], which has recently been proposed to feature a spin-liquid ground state arising from a spatially anisotropic kagome lattice. Our findings are based on a combination of bulk susceptibility, specific heat, and magnetic torque measurements that disclose a Néel transition temperature of $T_N=11$~K in this material, which might feature a coexistence of magnetic order and persistent spin dynamics as previously found in YCu$_3$(OH)$_6$Cl$_3$. Contrary to previous studies of single crystals and powders containing impurity inclusions, we use high-purity single crystals of Y$_3$Cu$_9$(OH)$_{18}$[Cl$_8$(OH)] grown via an optimized hydrothermal synthesis route that minimizes such inclusions. This study thus demonstrates that the lack of magnetic ordering in less pure samples of the investigated compound does not originate from the reduced symmetry of spin lattice but is instead of extrinsic origin.
△ Less
Submitted 20 May, 2021; v1 submitted 24 March, 2021;
originally announced March 2021.
-
Non-destructive testing and evaluation of composite materials/structures: A state-of-the-art review
Authors:
Bing Wang,
Shuncong Zhong,
Tung-Lik Lee,
Kevin S Fancey,
Jiawei Mi
Abstract:
Composite materials/structures are advancing in product efficiency, cost-effectiveness and the development of superior specific properties. There are increasing demands in their applications to load-carrying structures in aerospace, wind turbines, transportation, and medical equipment, etc. Thus robust and reliable non-destructive testing (NDT) of composites is essential to reduce safety concerns…
▽ More
Composite materials/structures are advancing in product efficiency, cost-effectiveness and the development of superior specific properties. There are increasing demands in their applications to load-carrying structures in aerospace, wind turbines, transportation, and medical equipment, etc. Thus robust and reliable non-destructive testing (NDT) of composites is essential to reduce safety concerns and maintenance costs. There have been various NDT methods built upon different principles for quality assurance during the whole lifecycle of a composite product. This paper reviews the most established NDT techniques for detection and evaluation of defects/damage evolution in composites. These include acoustic emission, ultrasonic testing, infrared thermography, terahertz testing, shearography, digital image correlation, as well as X-ray and neutron imaging. For each NDT technique, we cover a brief historical background, principles, standard practices, equipment and facilities used for composite research. We also compare and discuss their benefits and limitations, and further summarise their capabilities and applications to composite structures. Each NDT technique has its own potential and rarely achieves a full-scale diagnosis of structural integrity. Future development of NDT techniques for composites will be directed towards intelligent and automated inspection systems with high accuracy and efficient data processing capabilities.
△ Less
Submitted 4 March, 2020; v1 submitted 27 February, 2020;
originally announced February 2020.
-
Origin of Magnetic Ordering in a Structurally-Perfect Quantum Kagome Antiferromagnet
Authors:
T. Arh,
M. Gomilšek,
P. Prelovšek,
M. Pregelj,
M. Klanjšek,
A. Ozarowski,
S. J. Clark,
T. Lancaster,
W. Sun,
J. -X. Mi,
A. Zorko
Abstract:
The ground state of the simple Heisenberg nearest-neighbor quantum kagome antiferromagnetic model is a magnetically disordered spin liquid, yet various perturbations may lead to fundamentally different states. Here we disclose the origin of magnetic ordering in the structurally-perfect kagome material YCu$_3$(OH)$_6$Cl$_3$, which is free of the widespread impurity problem. {\it Ab-initio} calculat…
▽ More
The ground state of the simple Heisenberg nearest-neighbor quantum kagome antiferromagnetic model is a magnetically disordered spin liquid, yet various perturbations may lead to fundamentally different states. Here we disclose the origin of magnetic ordering in the structurally-perfect kagome material YCu$_3$(OH)$_6$Cl$_3$, which is free of the widespread impurity problem. {\it Ab-initio} calculations and modeling of its magnetic susceptibility reveal that, similar to the archetypal case of herbertsmithite, the nearest-neighbor exchange is by far the dominant isotropic interaction. Dzyaloshinskii-Moriya (DM) magnetic anisotropy deduced from electron spin resonance and specific-heat measurements is, however, significantly larger than in herbertsmithite. By enhancing spin correlations within kagome planes, this anisotropy is essential for magnetic ordering. Our study isolates the effect of DM anisotropy from other perturbations and unambiguously confirms the theoretical phase diagram.
△ Less
Submitted 9 July, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
3D characterization of the primary Al3Sc phases in an Al-Sc alloy using Synchrotron X-ray tomography and electron microscopy
Authors:
Yuliang Zhao,
Weiwen Zhang,
Billy Koe,
Wenjia Du,
Mengmeng Wang,
Weilin Wang,
Elodie Boller,
Alexander Rack,
Zhenzhong Sun,
Jiawei Mi
Abstract:
The three-dimensional structures of the primary Al3Sc particles in an Al-2Sc master alloy were studied by synchrotron X-ray microtomography, scanning and transmission electron microscopy. The Al3Sc phases were found to be a single cube and a cluster of cubes. The surface area, equivalent diameter of the Al3Sc cubes increased with the increasing of cube volume, but the specific surface area decreas…
▽ More
The three-dimensional structures of the primary Al3Sc particles in an Al-2Sc master alloy were studied by synchrotron X-ray microtomography, scanning and transmission electron microscopy. The Al3Sc phases were found to be a single cube and a cluster of cubes. The surface area, equivalent diameter of the Al3Sc cubes increased with the increasing of cube volume, but the specific surface area decreases. The primary Al3Sc cubes and Al-matrix have the same crystal orientation, indicating that the Al3Sc phases are the heterogeneous nucleation sites for Al. The experimental results show that α-Al2O3 are the possible nucleation sites for the Al3Sc cubes.
△ Less
Submitted 20 September, 2019;
originally announced September 2019.
-
Negative-vector-chirality 120$^\circ$ spin structure in the defect- and distortion-free quantum kagome antiferromagnet YCu$_3$(OH)$_6$Cl$_3$
Authors:
A. Zorko,
M. Pregelj,
M. Gomilsek,
M. Klanjsek,
O. Zaharko,
W. Sun,
J. -X. Mi
Abstract:
The magnetic ground state of the ideal quantum kagome antiferromagnet (QKA) has been a long-standing puzzle, mainly because perturbations to the nearest-neighbor isotropic Heisenberg Hamiltonian can lead to various fundamentally different ground states. Here we investigate a recently synthesized QKA representative YCu$_3$(OH)$_6$Cl$_3$, where perturbations commonly present in real materials, like…
▽ More
The magnetic ground state of the ideal quantum kagome antiferromagnet (QKA) has been a long-standing puzzle, mainly because perturbations to the nearest-neighbor isotropic Heisenberg Hamiltonian can lead to various fundamentally different ground states. Here we investigate a recently synthesized QKA representative YCu$_3$(OH)$_6$Cl$_3$, where perturbations commonly present in real materials, like lattice distortion and intersite ion mixing, are absent. Nevertheless, this compound enters a long-range magnetically ordered state below $T_N=15$ K. Our powder neutron diffraction experiment reveals that its magnetic structure corresponds to a coplanar $120^\circ$ state with negative vector spin chirality. The ordered magnetic moments are suppressed to $0.42(2)μ_B$, which is consistent with the previously detected spin dynamics persisting to the lowest experimentally accessible temperatures. This indicates either a coexistence of magnetic order and disorder or the presence of strong quantum fluctuations in the ground state of YCu$_3$(OH)$_6$Cl$_3$. The origin of the magnetic order is sought in terms of Dzyaloshinskii-Moriya magnetic anisotropy and further-neighbor isotropic exchange interactions.
△ Less
Submitted 16 October, 2019; v1 submitted 17 July, 2019;
originally announced July 2019.
-
Coexistence of magnetic order and persistent spin dynamics in a quantum kagome antiferromagnet with no intersite mixing
Authors:
A. Zorko,
M. Pregelj,
M. Klanjšek,
M. Gomilšek,
Z. Jagličić,
J. S. Lord,
J. A. T. Verezhak,
T. Shang,
W. Sun,
J. -X. Mi
Abstract:
One of the key questions concerning frustrated lattices that has lately emerged is the role of disorder in inducing spin-liquid-like properties. In this context, the quantum kagome antiferromagnets YCu$_3$(OH)$_6$Cl$_3$, which has been recently reported as the first geometrically perfect realization of the kagome lattice with negligible magnetic/non-magnetic intersite mixing and a possible quantum…
▽ More
One of the key questions concerning frustrated lattices that has lately emerged is the role of disorder in inducing spin-liquid-like properties. In this context, the quantum kagome antiferromagnets YCu$_3$(OH)$_6$Cl$_3$, which has been recently reported as the first geometrically perfect realization of the kagome lattice with negligible magnetic/non-magnetic intersite mixing and a possible quantum-spin-liquid ground state, is of particular interest. However, contrary to previous conjectures, here we show clear evidence of bulk magnetic ordering in this compound below $T_N=15$\,K by combining bulk magnetization and heat capacity measurements, and local-probe muon spin relaxation measurements. The magnetic ordering in this material is rather unconventional in several respects. Firstly, a crossover regime where the ordered state coexists with the paramagnetic state extends down to $T_N/3$ and, secondly, the fluctuation crossover is shifted far below $T_N$. Moreover, a reduced magnetic-entropy release at $T_N$ and persistent spin dynamics that is observed at temperatures as low as $T/T_N=1/300$ could be a sign of emergent excitations of correlated spin-loops or, alternatively, a sign of fragmentation of each magnetic moment into an ordered and a fluctuating part.
△ Less
Submitted 1 July, 2019; v1 submitted 5 April, 2019;
originally announced April 2019.
-
3D Characterisation of the Fe-rich intermetallic phases in Al-5%Cu alloys by synchrotron X-ray microtomography and skeletonisation
Authors:
Y. Zhao,
W. Du,
B. Koe,
T. Connolley,
S. Irvine,
P. K. Allan,
C. M. Schlepütz,
W. Zhang,
F. Wang,
D. G. Eskin,
J. Mi
Abstract:
Synchrotron X-ray microtomography and skeletonisation method were used to study the true 3D network structures and morphologies of the Fe-rich intermetallic phases in Al-5.0%Cu-0.6%Mn alloys with 0.5% and 1.0% Fe. It was found that, the Fe-phases in the 1.0%Fe alloy have node lengths of 5-25m; while those in the 0.5%Fe alloy are of 3-17 m. The Fe-phases in the 1.0%Fe alloy also developed sharper m…
▽ More
Synchrotron X-ray microtomography and skeletonisation method were used to study the true 3D network structures and morphologies of the Fe-rich intermetallic phases in Al-5.0%Cu-0.6%Mn alloys with 0.5% and 1.0% Fe. It was found that, the Fe-phases in the 1.0%Fe alloy have node lengths of 5-25m; while those in the 0.5%Fe alloy are of 3-17 m. The Fe-phases in the 1.0%Fe alloy also developed sharper mean curvature with wider distribution than those in the 0.5%Fe alloy. Combining SEM studies of the deeply-etched samples, the true 3D structures of 4 different type Fe-phases in both alloys are also revealed and demonstrated.
△ Less
Submitted 11 December, 2017;
originally announced December 2017.
-
Low-Frequency Microwave Induced Quantum Oscillations in A Two-Dimensional Electron System
Authors:
Jian Mi,
Huiying Liu,
Junren Shi,
L. N. Pfeiffer,
K. W. West,
K. W. Baldwin,
Chi Zhang
Abstract:
We study the magnetoresistance of an ultrahigh mobility GaAs/AlGaAs two-dimensional electron sample in a weak magnetic field under low-frequency (f < 20 GHz) microwave (MW) irradiation. We observe that with decreasing MW frequency, microwave induced resistance oscillations (MIRO) damp and multi-photon processes become dominant. At very low MW frequency (f < 4 GHz), MIRO disappears gradually and a…
▽ More
We study the magnetoresistance of an ultrahigh mobility GaAs/AlGaAs two-dimensional electron sample in a weak magnetic field under low-frequency (f < 20 GHz) microwave (MW) irradiation. We observe that with decreasing MW frequency, microwave induced resistance oscillations (MIRO) damp and multi-photon processes become dominant. At very low MW frequency (f < 4 GHz), MIRO disappears gradually and a new SdH-like oscillation develops. The analysis indicates that the new oscillation may originate from alternating Hall-field induced resistance oscillations (ac-HIRO), or can be viewed as a multi-photon process of MIRO in low MW frequency limit. Our findings bridge the non-equilibrium states of MIRO and HIRO, which can be brought into a frame of quantum tunneling junction model.
△ Less
Submitted 28 August, 2017;
originally announced August 2017.
-
Phase Transition of Na3SbS4 Superionic Conductor and Its Impact on Ion Transport
Authors:
Dechao Zhang,
Xiaoting Cao,
Di Xu,
Chuang Yu,
Wentao Hu,
Xinlin Yan,
Jianli Mi,
Bin Wen,
Limin Wang,
Long Zhang
Abstract:
In this work, a comprehensive research coupling experiment and computation has been performed to understand the phase transition of Na3SbS4 and to synthesize cubic Na3SbS4 (c-Na3SbS4), a high temperature phase of Na3SbS4 that is difficult to be preserved from high temperature. The formation of c-Na3SbS4 is verified by Rietveld refinement and electrochemical impedance spectroscopy. Both experiment…
▽ More
In this work, a comprehensive research coupling experiment and computation has been performed to understand the phase transition of Na3SbS4 and to synthesize cubic Na3SbS4 (c-Na3SbS4), a high temperature phase of Na3SbS4 that is difficult to be preserved from high temperature. The formation of c-Na3SbS4 is verified by Rietveld refinement and electrochemical impedance spectroscopy. Both experiment and theoretical calculation reveal that the ionic conductivity of c-Na3SbS4 is higher than that of t-Na3SbS4, though the values are in the same order of magnitude. Both structures allow fast ion transport.
△ Less
Submitted 12 July, 2017;
originally announced July 2017.
-
Quantum capacitance anomalies of two-dimensional non-equilibrium states under microwave irradiation
Authors:
Jian Mi,
Jianli Wang,
Saeed Fallahi,
Geoffrey C. Gardner,
M. J. Manfra,
Chi Zhang
Abstract:
We report our direct study of the compressibility on ultrahigh mobility two-dimensional electron system ($μ_{e} \sim 1 \times 10^{7}$ cm$^{2}$/Vs) in GaAs/AlGaAs quantum wells under microwave (MW) irradiation. The field penetration current results show that the quantum capacitance oscillates with microwave induced resistance oscillations (MIRO), however, the trend is opposite with respect to the c…
▽ More
We report our direct study of the compressibility on ultrahigh mobility two-dimensional electron system ($μ_{e} \sim 1 \times 10^{7}$ cm$^{2}$/Vs) in GaAs/AlGaAs quantum wells under microwave (MW) irradiation. The field penetration current results show that the quantum capacitance oscillates with microwave induced resistance oscillations (MIRO), however, the trend is opposite with respect to the compressibility for usual equilibrium states in previous theoretical explanations. The anomalous phenomena provide a platform for study on the non-equilibrium system under microwave, and point to the current domains and inhomogeneity induced by radiation. Moreover, the quantum capacitance indication for multi-photon process around $j = 1/2$ is detected under intensive microwave below 30 GHz.
△ Less
Submitted 15 December, 2016;
originally announced December 2016.
-
Spin Injection and Inverse Edelstein Effect in the Surface States of Topological Kondo Insulator SmB6
Authors:
Qi Song,
Jian Mi,
Dan Zhao,
Tang Su,
Wei Yuan,
Wenyu Xing,
Yangyang Chen,
Tianyu Wang,
Tao Wu,
Xian Hui Chen,
X. C. Xie,
Chi Zhang,
**g Shi,
Wei Han
Abstract:
There has been considerable interest in exploiting the spin degrees of freedom of electrons for potential information storage and computing technologies. Topological insulators (TI), a class of quantum materials, have special gapless edge/surface states, where the spin polarization of the Dirac fermions is locked to the momentum direction. This spin-momentum locking property gives rise to very int…
▽ More
There has been considerable interest in exploiting the spin degrees of freedom of electrons for potential information storage and computing technologies. Topological insulators (TI), a class of quantum materials, have special gapless edge/surface states, where the spin polarization of the Dirac fermions is locked to the momentum direction. This spin-momentum locking property gives rise to very interesting spin-dependent physical phenomena such as the Edelstein and inverse Edelstein effects. However, the spin injection in pure surface states of TI is very challenging because of the coexistence of the highly conducting bulk states. Here, we experimentally demonstrate the spin injection and observe the inverse Edelstein effect in the surface states of a topological Kondo insulator, SmB6. At low temperatures when only surface carriers are present, a clear spin signal is observed. Furthermore, the magnetic field angle dependence of the spin signal is consistent with spin-momentum locking property of surface states of SmB6.
△ Less
Submitted 4 October, 2016;
originally announced October 2016.
-
Photovoltage Detection of Edge Magnetoplasmon Oscillations and Giant Magnetoplasmon Resonances in A Two-Dimensional Hole System
Authors:
Jian Mi,
Jianli Wang,
L. N. Pfeiffer,
K. W. West,
K. W. Baldwin,
Chi Zhang
Abstract:
In our high mobility p-type AlGaAs/GaAs two-dimensional hole samples, we originally observe the B-periodic oscillation induced by microwave (MW) in photovoltage (PV) measurements. In the frequency range of our measurements (5 - 40 GHz), the period (ΔB) is inversely proportional to the microwave frequency (f). The distinct oscillations come from the edge magnetoplasmon (EMP) in the high quality hea…
▽ More
In our high mobility p-type AlGaAs/GaAs two-dimensional hole samples, we originally observe the B-periodic oscillation induced by microwave (MW) in photovoltage (PV) measurements. In the frequency range of our measurements (5 - 40 GHz), the period (ΔB) is inversely proportional to the microwave frequency (f). The distinct oscillations come from the edge magnetoplasmon (EMP) in the high quality heavy hole system. In our hole sample with a very large effective mass, the observation of the EMP oscillations is in neither the low frequency limit nor the high frequency limit, and the dam** of the EMP oscillations is very weak under high magnetic fields. Simultaneously, we observe the giant plasmon resonance signals in our measurements on the shallow two-dimensional hole system (2DHS).
△ Less
Submitted 14 December, 2016; v1 submitted 30 June, 2016;
originally announced June 2016.
-
Absence of superconductivity in ultra-thin layers of FeSe synthesized on a topological insulator
Authors:
Andreas Eich,
Nils Rollfing,
Fabian Arnold,
Charlotte Sanders,
Pascal R. Ewen,
Marco Bianchi,
Maciej Dendzik,
Matteo Michiardi,
Jian-Li Mi,
Martin Bremholm,
Daniel Wegner,
Philip Hofmann,
Alexander A. Khajetoorians
Abstract:
The structural and electronic properties of FeSe ultra-thin layers on Bi$_{2}$Se$_{3}$ have been investigated with a combination of scanning tunneling microscopy and spectroscopy and angle-resolved photoemission spectroscopy. The FeSe multi-layers, which are predominantly 3-5 monolayers (ML) thick, exhibit a hole pocket-like electron band at \barΓ and a dumbbell-like feature at \bar{M}, similar to…
▽ More
The structural and electronic properties of FeSe ultra-thin layers on Bi$_{2}$Se$_{3}$ have been investigated with a combination of scanning tunneling microscopy and spectroscopy and angle-resolved photoemission spectroscopy. The FeSe multi-layers, which are predominantly 3-5 monolayers (ML) thick, exhibit a hole pocket-like electron band at \barΓ and a dumbbell-like feature at \bar{M}, similar to multi-layers of FeSe on SrTiO$_{3}$. Moreover, the topological state of the Bi2Se3 is preserved beneath the FeSe layer, as indicated by a heavily \it{n}-doped Dirac cone. Low temperature STS does not exhibit a superconducting gap for any investigated thickness down to a temperature of 5 K.
△ Less
Submitted 26 September, 2016; v1 submitted 18 June, 2016;
originally announced June 2016.
-
Non-magnetic ground state of Ni adatoms on Te-terminated bismuth chalcogenide topological insulators
Authors:
M. Vondracek,
J. Honolka,
L. Cornils,
J. Warmuth,
L. Zhou,
A. Kamlapure,
A. A. Khajetoorians,
R. Wiesendanger,
J. Wiebe,
M. Michiardi,
M. Bianchi,
J. Miwa,
L. Barreto,
P. Hofmann,
C. Piamonteze,
J. Minar,
S. Mankovsky,
St. Borek,
H. Ebert,
M. Schueler,
T. Wehling,
J. -L. Mi,
B. -B. Iversen
Abstract:
We report on the quenching of single Ni adatom moments on Te-terminated Bi2Te2Se and Bi2Te3 topological insulator surfaces. The effect becomes manifested as a missing X-ray magnetic circular dichroism for resonant L3,2 transitions into partially filled Ni 3d states of occupancy n_d = 9.2. On the basis of a comparative study of Ni and Fe using scanning tunneling microscopy and ab initio calculation…
▽ More
We report on the quenching of single Ni adatom moments on Te-terminated Bi2Te2Se and Bi2Te3 topological insulator surfaces. The effect becomes manifested as a missing X-ray magnetic circular dichroism for resonant L3,2 transitions into partially filled Ni 3d states of occupancy n_d = 9.2. On the basis of a comparative study of Ni and Fe using scanning tunneling microscopy and ab initio calculations we are able to relate the element specific moment formation to a local Stoner criterion. While Fe adatoms form large spin moments of m_s = 2.54 mu_B with out-of-plane anisotropy due to a sufficiently large density of states at the Fermi energy, Ni remains well below an effective Stoner threshold for local moment formation. With the Fermi level remaining in the bulk band gap after adatom deposition, non-magnetic Ni and preferentially out-of-plane oriented magnetic Fe with similar structural properties on Bi2Te2Se surfaces constitute a perfect platform to study off-on effects of time-reversal symmetry breaking on topological surface states.
△ Less
Submitted 31 March, 2016;
originally announced March 2016.
-
Sputtering induced re-emergence of the topological surface state in Bi$_2$Se$_3$
Authors:
Raquel Queiroz,
Gabriel Landolt,
Stefan Muff,
Bartosz Slomski,
Thorsten Schmitt,
Vladimir N. Strocov,
Jianli Mi,
Bo Brummerstedt Iversen,
Philip Hofmann,
Jürg Osterwalder,
Andreas P. Schnyder,
J. Hugo Dil
Abstract:
We study the fate of the surface states of Bi$_2$Se$_3$ under disorder with strength larger than the bulk gap, caused by neon sputtering and nonmagnetic adsorbates. We find that neon sputtering introduces strong but dilute defects, which can be modeled by a unitary impurity distribution, whereas adsorbates, such as water vapor or carbon monoxide, are best described by Gaussian disorder. Remarkably…
▽ More
We study the fate of the surface states of Bi$_2$Se$_3$ under disorder with strength larger than the bulk gap, caused by neon sputtering and nonmagnetic adsorbates. We find that neon sputtering introduces strong but dilute defects, which can be modeled by a unitary impurity distribution, whereas adsorbates, such as water vapor or carbon monoxide, are best described by Gaussian disorder. Remarkably, these two disorder types have a dramatically different effect on the surface states. Our soft x-ray ARPES measurements combined with numerical simulations show that unitary surface disorder pushes the Dirac state to inward quintuplet layers, burying it below an insulating surface layer. As a consequence, the surface spectral function becomes weaker, but retains its quasiparticle peak. This is in contrast to Gaussian disorder, which smears out the quasiparticle peak completely. At the surface of Bi$_2$Se$_3$, the effects of Gaussian disorder can be reduced by removing surface adsorbates using neon sputtering, which, however, introduces unitary scatterers. Since unitary disorder has a weaker effect than Gaussian disorder, the ARPES signal of the Dirac surface state becomes sharper upon sputtering.
△ Less
Submitted 18 December, 2015;
originally announced December 2015.
-
Robust diamond-like Fe-Si network in the zero-strain NaxFeSiO4 Cathode
Authors:
Z. Ye,
X. Zhao,
S. D. Li,
S. Q. Wu,
P. Wu,
M. C. Nguyen,
J. H. Guo,
J. X. Mi,
Z. L. Gong,
Z. Z. Zhu,
Y. Yang,
C. Z. Wang,
K. M. Ho
Abstract:
Sodium orthosilicates Na2MSiO4 (M denotes transition metals) have attracted much attention due to the possibility of exchanging two electrons per formula unit. In this work, we report a group of sodium iron orthosilicates Na2FeSiO4, the crystal structures of which are characterized by a diamond-like Fe-Si network. The Fe-Si network is quite robust against the charge/discharge process, which explai…
▽ More
Sodium orthosilicates Na2MSiO4 (M denotes transition metals) have attracted much attention due to the possibility of exchanging two electrons per formula unit. In this work, we report a group of sodium iron orthosilicates Na2FeSiO4, the crystal structures of which are characterized by a diamond-like Fe-Si network. The Fe-Si network is quite robust against the charge/discharge process, which explains the high structural stability observed in experiment. Using the density functional theory within the GGA+U framework and X-ray diffraction studies, the crystal structures and structural stabilities during the sodium insertion/deinsertion process are systematically investigated. The calculated average deintercalation voltages are in good agreement with the experimental result.
△ Less
Submitted 10 December, 2015;
originally announced December 2015.
-
A modified lattice Bhatnagar-Gross-Krook model for convection heat transfer in porous media
Authors:
Liang Wang,
Jianchun Mi,
Zhaoli Guo
Abstract:
The lattice Bhatnagar-Gross-Krook (LBGK) model has become the most popular one in the lattice Boltzmann method for simulating the convection heat transfer in porous media. However, the LBGK model generally suffers from numerical instability at low fluid viscosities and effective thermal diffusivities. In this paper, a modified LBGK model is developed for incompressible thermal flows in porous medi…
▽ More
The lattice Bhatnagar-Gross-Krook (LBGK) model has become the most popular one in the lattice Boltzmann method for simulating the convection heat transfer in porous media. However, the LBGK model generally suffers from numerical instability at low fluid viscosities and effective thermal diffusivities. In this paper, a modified LBGK model is developed for incompressible thermal flows in porous media at the representative elementary volume scale, in which the shear rate and temperature gradient are incorporated into the equilibrium distribution functions. With two additional parameters, the relaxation times in the collision process can be fixed at a proper value invariable to the viscosity and the effective thermal diffusivity. In addition, by constructing a modified equilibrium distribution function and a source term in the evolution equation of temperature field, the present model can recover the macroscopic equations correctly through the Chapman-Enskog analysis, which is another key point different from previous LBGK models. Several benchmark problems are simulated to validate the present model with the proposed local computing scheme for the shear rate and temperature gradient, and the numerical results agree well with analytical solutions and/or those well-documented data in previous studies. It is also shown that the present model and the computational schemes for the gradient operators have a second-order accuracy in space, and better numerical stability of the present modified LBGK model than previous LBGK models is demonstrated.
△ Less
Submitted 12 May, 2015;
originally announced May 2015.
-
Strongly anisotropic spin-orbit splitting in a two-dimensional electron gas
Authors:
Matteo Michiardi,
Marco Bianchi,
Maciej Dendzik,
Jill Miwa,
Moritz Hoesch,
Timur K. Kim,
Peter Matzen,
Jianli Mi,
Martin Bremholm,
Bo Brummerstedt Iversen,
Philip Hofmann
Abstract:
Near-surface two-dimensional electron gases on the topological insulator Bi$_2$Te$_2$Se are induced by electron do** and studied by angle-resolved photoemission spectroscopy. A pronounced spin-orbit splitting is observed for these states. The $k$-dependent splitting is strongly anisotropic to a degree where a large splitting ($\approx 0.06$ Å$^{-1}$) can be found in the $\barΓ\bar{M}$ direction…
▽ More
Near-surface two-dimensional electron gases on the topological insulator Bi$_2$Te$_2$Se are induced by electron do** and studied by angle-resolved photoemission spectroscopy. A pronounced spin-orbit splitting is observed for these states. The $k$-dependent splitting is strongly anisotropic to a degree where a large splitting ($\approx 0.06$ Å$^{-1}$) can be found in the $\barΓ\bar{M}$ direction while the states are hardly split along $\barΓ\bar{K}$. The direction of the anisotropy is found to be qualitatively inconsistent with results expected for a third-order anisotropic Rashba Hamiltonian. However, a $\mathbf{k} \cdot \mathbf{p}$ model that includes the possibility of band structure anisotropy as well as both isotropic and anisotropic third order Rashba splitting can explain the results. The isotropic third order contribution to the Rashba Hamiltonian is found to be negative, reducing the energy splitting at high $k$. The interplay of band structure, higher order Rashba effect and tuneable do** offers the opportunity to engineer not only the size of the spin-orbit splitting but also its direction.
△ Less
Submitted 26 November, 2014;
originally announced November 2014.
-
Intra- and Interband Electron Scattering in the Complex Hybrid Topological Insulator Bismuth Bilayer on Bi$_2$Se$_3$
Authors:
A. Eich,
M. Michiardi,
G. Bihlmayer,
X. -G. Zhu,
J. -L. Mi,
Bo B. Iversen,
R. Wiesendanger,
Ph. Hofmann,
A. A. Khajetoorians,
J. Wiebe
Abstract:
The band structure, intra- and interband scattering processes of the electrons at the surface of a bismuth-bilayer on Bi$_2$Se$_3$ have been experimentally investigated by low-temperature Fourier-transform scanning tunneling spectroscopy. The observed complex quasiparticle interference patterns are compared to a simulation based on the spin-dependent joint density of states approach using the surf…
▽ More
The band structure, intra- and interband scattering processes of the electrons at the surface of a bismuth-bilayer on Bi$_2$Se$_3$ have been experimentally investigated by low-temperature Fourier-transform scanning tunneling spectroscopy. The observed complex quasiparticle interference patterns are compared to a simulation based on the spin-dependent joint density of states approach using the surface-localized spectral function calculated from first principles as the only input. Thereby, the origin of the quasiparticle interferences can be traced back to intraband scattering in the bismuth bilayer valence band and Bi$_2$Se$_3$ conduction band, and to interband scattering between the two-dimensional topological state and the bismuth-bilayer valence band. The investigation reveals that the bilayer band gap, which is predicted to host one-dimensional topological states at the edges of the bilayer, is pushed several hundred milli-electronvolts above the Fermi level. This result is rationalized by an electron transfer from the bilayer to Bi$_2$Se$_3$ which also leads to a two-dimensional electron state in the Bi$_2$Se$_3$ conduction band with a strong Rashba spin-splitting, coexisting with the topological state and bilayer valence band.
△ Less
Submitted 24 September, 2014;
originally announced September 2014.
-
Volume-averaged macroscopic equation for fluid flow in moving porous media
Authors:
Liang Wang,
Lian-** Wang,
Zhaoli Guo,
Jianchun Mi
Abstract:
Darcy's law and the Brinkman equation are two main models used for cree** fluid flows inside moving permeable particles. For these two models, the time derivative and the nonlinear convective terms of fluid velocity are neglected in the momentum equation. In this paper, a new momentum equation including these two terms are rigorously derived from the pore-scale microscopic equations by the volum…
▽ More
Darcy's law and the Brinkman equation are two main models used for cree** fluid flows inside moving permeable particles. For these two models, the time derivative and the nonlinear convective terms of fluid velocity are neglected in the momentum equation. In this paper, a new momentum equation including these two terms are rigorously derived from the pore-scale microscopic equations by the volume-averaging method, which can reduces to Darcy's law and the Brinkman equation under cree** flow conditions. Using the lattice Boltzmann equation method, the macroscopic equations are solved for the problem of a porous circular cylinder moving along the centerline of a channel. Galilean invariance of the equations are investigated both with the intrinsic phase averaged velocity and the phase averaged velocity. The results demonstrate that the commonly used phase averaged velocity cannot serve as the superficial velocity, while the intrinsic phase averaged velocity should be chosen for porous particulate systems.
△ Less
Submitted 24 April, 2014;
originally announced April 2014.
-
Screening and atomic-scale engineering of the potential at a topological insulator surface
Authors:
P. Löptien,
L. Zhou,
J. Wiebe,
A. A. Khajetoorians,
J. L. Mi,
B. B. Iversen,
Ph. Hofmann,
R. Wiesendanger
Abstract:
The electrostatic behavior of a prototypical three-dimensional topological insulator Bi$_2$Se$_3$(111) is investigated by a scanning tunneling microscopy (STM) study of the distribution of Rb atoms adsorbed on the surface. The positively charged ions are screened by both free electrons residing in the topological surface state as well as band bending induced quantum well states of the conduction b…
▽ More
The electrostatic behavior of a prototypical three-dimensional topological insulator Bi$_2$Se$_3$(111) is investigated by a scanning tunneling microscopy (STM) study of the distribution of Rb atoms adsorbed on the surface. The positively charged ions are screened by both free electrons residing in the topological surface state as well as band bending induced quantum well states of the conduction band, leading to a surprisingly short screening length. Combining a theoretical description of the potential energy with STM-based atomic manipulation, we demonstrate the ability to create tailored electronic potential landscapes on topological surfaces with atomic-scale control.
△ Less
Submitted 17 December, 2013; v1 submitted 13 December, 2013;
originally announced December 2013.
-
Direct Measurement of Surface Transport on a Bulk Topological Insulator
Authors:
Lucas Barreto,
Lisa Kühnemund,
Frederik Edler,
Christoph Tegenkamp,
Jianli Mi,
Martin Bremholm,
Bo Brummerstedt Iversen,
Christian Frydendahl,
Marco Bianchi,
Philip Hofmann
Abstract:
Topological insulators are guaranteed to support metallic surface states on an insulating bulk, and one should thus expect that the electronic transport in these materials is dominated by the surfaces states. Alas, due to the high remaining bulk conductivity, surface contributions to transport have so-far only been singled out indirectly via quantum oscillations, or for devices based on gated and…
▽ More
Topological insulators are guaranteed to support metallic surface states on an insulating bulk, and one should thus expect that the electronic transport in these materials is dominated by the surfaces states. Alas, due to the high remaining bulk conductivity, surface contributions to transport have so-far only been singled out indirectly via quantum oscillations, or for devices based on gated and doped topological insulator thin films, a situation in which the surface carrier mobility could be limited by defect and interface scattering. Here we present the first direct measurement of surface-dominated conduction on an atomically clean surface of bulk-insulating Bi$_2$Te$_2$Se. Using nano-scale four point setups with variable contact distance, we show that the transport at 30 K is two-dimensional rather than three-dimensional and by combining these measurements with angle-resolved photoemission results from the same crystals, we find a surface state mobility of 390(30) cm$^{2}$V$^{-1}$s$^{-1}$ at 30 K at a carrier concentration of 8.71(7)$\times 10^{12}$ cm$^{-2}$.
△ Less
Submitted 1 October, 2013;
originally announced October 2013.
-
Surface structure of Bi2Se3(111) determined by low-energy electron diffraction and surface X-ray diffraction
Authors:
Diogo Duarte dos Reis,
Lucas Barreto,
Marco Bianchi,
Guilherme Almeida Silva Ribeiro,
Edmar Avellar Soares,
Wendell Simoes e Silva,
Vagner Eustaquio de Carvalho,
Jonathan Rawle,
Moritz Hoesch,
Chris Nicklin,
Willians Principe Fernandes,
Jianli Mi,
Bo Brummerstedt Iversen,
Philip Hofmann
Abstract:
The surface structure of the prototypical topological insulator Bi2Se3 is determined by low-energy electron diffraction and surface X-ray diffraction at room temperature. Both approaches show that the crystal is terminated by an intact quintuple layer. Specifically, an alternative termination by a bismuth bilayer is ruled out. Surface relaxations obtained by both techniques are in good agreement w…
▽ More
The surface structure of the prototypical topological insulator Bi2Se3 is determined by low-energy electron diffraction and surface X-ray diffraction at room temperature. Both approaches show that the crystal is terminated by an intact quintuple layer. Specifically, an alternative termination by a bismuth bilayer is ruled out. Surface relaxations obtained by both techniques are in good agreement with each other and found to be small. This includes the relaxation of the van der Waals gap between the first two quintuple layers.
△ Less
Submitted 14 June, 2013;
originally announced June 2013.
-
Controllable magnetic do** of the surface state of a topological insulator
Authors:
T. Schlenk,
M. Bianchi,
M. Koleini,
A. Eich,
O. Pietzsch,
T. O. Wehling,
T. Frauenheim,
A. Balatsky,
J. -L. Mi,
B. B. Iversen,
J. Wiebe,
A. A. Khajetoorians,
Ph. Hofmann,
R. Wiesendanger
Abstract:
A combined experimental and theoretical study of do** individual Fe atoms into Bi2Se3 is presented. It is shown through a scanning tunneling microscopy study that single Fe atoms initially located at hollow sites on top of the surface (adatoms) can be incorporated into subsurface layers by thermally-activated diffusion. Angle-resolved photoemission spectroscopy in combination with ab-initio calc…
▽ More
A combined experimental and theoretical study of do** individual Fe atoms into Bi2Se3 is presented. It is shown through a scanning tunneling microscopy study that single Fe atoms initially located at hollow sites on top of the surface (adatoms) can be incorporated into subsurface layers by thermally-activated diffusion. Angle-resolved photoemission spectroscopy in combination with ab-initio calculations suggest that the do** behavior changes from electron donation for the Fe adatom to neutral or electron acceptance for Fe incorporated into substitutional Bi sites. According to first principles calculations within density functional theory, these Fe substitutional impurities retain a large magnetic moment thus presenting an alternative scheme for magnetically do** the topological surface state. For both types of Fe do**, we see no indication of a gap at the Dirac point.
△ Less
Submitted 9 November, 2012;
originally announced November 2012.
-
Evidence for a direct band gap in the topological insulator Bi2Se3 from theory and experiment
Authors:
I. A. Nechaev,
R. C. Hatch,
M. Bianchi,
D. Guan,
C. Friedrich,
I. Aguilera,
J. L. Mi,
B. B. Iversen,
S. Blügel,
Ph. Hofmann,
E. V. Chulkov
Abstract:
Using angle-resolved photoelectron spectroscopy and ab-initio GW calculations, we unambiguously show that the widely investigated three-dimensional topological insulator Bi2Se3 has a direct band gap at the Gamma point. Experimentally, this is shown by a three-dimensional band map** in large fractions of the Brillouin zone. Theoretically, we demonstrate that the valence band maximum is located at…
▽ More
Using angle-resolved photoelectron spectroscopy and ab-initio GW calculations, we unambiguously show that the widely investigated three-dimensional topological insulator Bi2Se3 has a direct band gap at the Gamma point. Experimentally, this is shown by a three-dimensional band map** in large fractions of the Brillouin zone. Theoretically, we demonstrate that the valence band maximum is located at the Brillouin center only if many-body effects are included in the calculation. Otherwise, it is found in a high-symmetry mirror plane away from the zone center.
△ Less
Submitted 19 March, 2013; v1 submitted 16 October, 2012;
originally announced October 2012.
-
Robust Surface Do** of Bi$_2$Se$_3$ by Rb Intercalation
Authors:
Marco Bianchi,
Richard C. Hatch,
Zheshen Li,
Philip Hofmann,
Fei Song,
Jianli Mi,
Bo Brummerstedt Iversen,
Zakaria M. Abd El-Fattah,
Peter Löptien,
Lihui Zhou,
Alexander Ako Khajetoorians,
Jens Wiebe,
Roland Wiesendanger,
Justin Wells
Abstract:
Rubidium adsorption on the surface of the topological insulator Bi$_2$Se$_3$ is found to induce a strong downward band bending, leading to the appearance of a quantum-confined two dimensional electron gas states (2DEGs) in the conduction band. The 2DEGs shows a strong Rashba-type spin-orbit splitting, and it has previously been pointed out that this has relevance to nano-scale spintronics devices.…
▽ More
Rubidium adsorption on the surface of the topological insulator Bi$_2$Se$_3$ is found to induce a strong downward band bending, leading to the appearance of a quantum-confined two dimensional electron gas states (2DEGs) in the conduction band. The 2DEGs shows a strong Rashba-type spin-orbit splitting, and it has previously been pointed out that this has relevance to nano-scale spintronics devices. The adsorption of Rb atoms, on the other hand, renders the surface very reactive and exposure to oxygen leads to a rapid degrading of the 2DEGs. We show that intercalating the Rb atoms, presumably into the van der Waals gaps in the quintuple layer structure of Bi$_2$Se$_3$, drastically reduces the surface reactivity while not affecting the promising electronic structure. The intercalation process is observed above room temperature and accelerated with increasing initial Rb coverage, an effect that is ascribed to the Coulomb interaction between the charged Rb ions. Coulomb repulsion is also thought to be responsible for a uniform distribution of Rb on the surface.
△ Less
Submitted 2 August, 2012;
originally announced August 2012.
-
The electronic structure of clean and adsorbate-covered Bi2Se3: an angle-resolved photoemission study
Authors:
Marco Bianchi,
Richard C. Hatch,
Dandan Guan,
Tilo Planke,
Jianli Mi,
Bo Brummerstedt Iversen,
Philip Hofmann
Abstract:
Angle-resolved photoelectron spectroscopy is used for a detailed study of the electronic structure of the topological insulator Bi2Se3. Nominally stoichiometric and calcium-doped samples were investigated. The pristine surface shows the topological surface state in the bulk band gap. As time passes, the Dirac point moves to higher binding energies, indicating an increasingly strong downward bendin…
▽ More
Angle-resolved photoelectron spectroscopy is used for a detailed study of the electronic structure of the topological insulator Bi2Se3. Nominally stoichiometric and calcium-doped samples were investigated. The pristine surface shows the topological surface state in the bulk band gap. As time passes, the Dirac point moves to higher binding energies, indicating an increasingly strong downward bending of the bands near the surface. This time-dependent band bending is related to a contamination of the surface and can be accelerated by intentionally exposing the surface to carbon monoxide and other species. For a sufficiently strong band bending, additional states appear at the Fermi level. These are interpreted as quantised conduction band states. For large band bendings, these states are found to undergo a strong Rashba splitting. The formation of quantum well states is also observed for the valence band states. Different interpretations of similar data are also discussed.
△ Less
Submitted 7 June, 2012;
originally announced June 2012.
-
In-plane magnetic anisotropy of Fe atoms on Bi$_2$Se$_3$(111)
Authors:
J. Honolka,
A. A. Khajetoorians,
V. Sessi,
T. O. Wehling,
S. Stepanow,
J. -L. Mi,
B. B. Iversen,
T. Schlenk,
J. Wiebe,
N. Brookes,
A. I. Lichtenstein,
Ph. Hofmann,
K. Kern,
R. Wiesendanger
Abstract:
The robustness of the gapless topological surface state hosted by a 3D topological insulator against perturbations of magnetic origin has been the focus of recent investigations. We present a comprehensive study of the magnetic properties of Fe impurities on a prototypical 3D topological insulator Bi$_2$Se$_3$ using local low temperature scanning tunneling microscopy and integral x-ray magnetic ci…
▽ More
The robustness of the gapless topological surface state hosted by a 3D topological insulator against perturbations of magnetic origin has been the focus of recent investigations. We present a comprehensive study of the magnetic properties of Fe impurities on a prototypical 3D topological insulator Bi$_2$Se$_3$ using local low temperature scanning tunneling microscopy and integral x-ray magnetic circular dichroism techniques. Single Fe adatoms on the Bi$_2$Se$_3$ surface, in the coverage range $\approx 1%$ are heavily relaxed into the surface and exhibit a magnetic easy axis within the surface-plane, contrary to what was assumed in recent investigations on the opening of a gap. Using \textit{ab initio} approaches, we demonstrate that an in-plane easy axis arises from the combination of the crystal field and dynamic hybridization effects.
△ Less
Submitted 22 December, 2011; v1 submitted 20 December, 2011;
originally announced December 2011.
-
Simultaneous quantization of bulk conduction and valence states through adsorption of nonmagnetic impurities on Bi2Se3
Authors:
Marco Bianchi,
Richard C. Hatch,
Jianli Mi,
Bo Brummerstedt Iversen,
Philip Hofmann
Abstract:
Exposing the (111) surface of the topological insulator Bi2Se3 to carbon monoxide results in strong shifts of the features observed in angle-resolved photoemission. The behavior is very similar to an often reported `aging' effect of the surface and it is concluded that this aging is most likely due to the adsorption of rest gas molecules. The spectral changes are also similar to those recently rep…
▽ More
Exposing the (111) surface of the topological insulator Bi2Se3 to carbon monoxide results in strong shifts of the features observed in angle-resolved photoemission. The behavior is very similar to an often reported `aging' effect of the surface and it is concluded that this aging is most likely due to the adsorption of rest gas molecules. The spectral changes are also similar to those recently reported in connection with the adsorption of the magnetic adatom Fe. All spectral changes can be explained by a simultaneous confinement of the conduction band and valence band states. This is only possible because of the unusual bulk electronic structure of Bi2Se3. The valence band quantization leads to spectral features which resemble those of a band gap opening at the Dirac point.
△ Less
Submitted 19 May, 2011;
originally announced May 2011.
-
Stability of the Bi2Se3(111) topological state: electron-phonon and -defect scattering
Authors:
Richard C. Hatch,
Marco Bianchi,
Dandan Guan,
Shining Bao,
Jianli Mi,
Bo Brummerstedt Iversen,
Louis Nilsson,
Liv Hornekaer,
Philip Hofmann
Abstract:
The electron dynamics of the topological surface state on Bi2Se3(111) is investigated by temperature-dependent angle-resolved photoemission. The electron-phonon coupling strength is determined in a spectral region for which only intraband scattering involving the topological surface band is possible. The electron-phonon coupling constant is found to be lambda=0.25(5), more than an order of magnitu…
▽ More
The electron dynamics of the topological surface state on Bi2Se3(111) is investigated by temperature-dependent angle-resolved photoemission. The electron-phonon coupling strength is determined in a spectral region for which only intraband scattering involving the topological surface band is possible. The electron-phonon coupling constant is found to be lambda=0.25(5), more than an order of magnitude higher than the corresponding value for intraband scattering in the noble metal surface states. The stability of the topological state with respect to surface irregularities was also tested by introducing a small concentration of surface defects via ion bombardment. It is found that, in contrast to the bulk states, the topological state can no longer be observed in the photoemission spectra and this cannot merely be attributed to surface defect-induced momentum broadening.
△ Less
Submitted 26 April, 2011;
originally announced April 2011.
-
Large tuneable Rashba spin splitting of a two-dimensional electron gas in Bi2Se3
Authors:
P. D. C. King,
R. C. Hatch,
M. Bianchi,
R. Ovsyannikov,
C. Lupulescu,
G. Landolt,
B. Slomski,
J. H. Dil,
D. Guan,
J. L. Mi,
E. D. L. Rienks,
J. Fink,
A. Lindblad,
S. Svensson,
S. Bao,
G. Balakrishnan,
B. B. Iversen,
J. Osterwalder,
W. Eberhardt,
F. Baumberger,
Ph. Hofmann
Abstract:
We report a Rashba spin splitting of a two-dimensional electron gas in the topological insulator Bi$_2$Se$_3$ from angle-resolved photoemission spectroscopy. We further demonstrate its electrostatic control, and show that spin splittings can be achieved which are at least an order-of-magnitude larger than in other semiconductors. Together these results show promise for the miniaturization of spint…
▽ More
We report a Rashba spin splitting of a two-dimensional electron gas in the topological insulator Bi$_2$Se$_3$ from angle-resolved photoemission spectroscopy. We further demonstrate its electrostatic control, and show that spin splittings can be achieved which are at least an order-of-magnitude larger than in other semiconductors. Together these results show promise for the miniaturization of spintronic devices to the nanoscale and their operation at room temperature.
△ Less
Submitted 26 August, 2011; v1 submitted 16 March, 2011;
originally announced March 2011.
-
Coexistence of the topological state and a two-dimensional electron gas on the surface of Bi2Se3
Authors:
Marco Bianchi,
Dandan Guan,
Shining Bao,
Jianli Mi,
Bo Brummerstedt Iversen,
Philip D. C. King,
Philip Hofmann
Abstract:
Topological insulators are a recently discovered class of materials with fascinating properties: While the inside of the solid is insulating, fundamental symmetry considerations require the surfaces to be metallic. The metallic surface states show an unconventional spin texture, electron dynamics and stability. Recently, surfaces with only a single Dirac cone dispersion have received particular at…
▽ More
Topological insulators are a recently discovered class of materials with fascinating properties: While the inside of the solid is insulating, fundamental symmetry considerations require the surfaces to be metallic. The metallic surface states show an unconventional spin texture, electron dynamics and stability. Recently, surfaces with only a single Dirac cone dispersion have received particular attention. These are predicted to play host to a number of novel physical phenomena such as Majorana fermions, magnetic monopoles and unconventional superconductivity. Such effects will mostly occur when the topological surface state lies in close proximity to a magnetic or electric field, a (superconducting) metal, or if the material is in a confined geometry. Here we show that a band bending near to the surface of the topological insulator Bi$_2$Se$_3$ gives rise to the formation of a two-dimensional electron gas (2DEG). The 2DEG, renowned from semiconductor surfaces and interfaces where it forms the basis of the integer and fractional quantum Hall effects, two-dimensional superconductivity, and a plethora of practical applications, coexists with the topological surface state in Bi$_2$Se$_3$. This leads to the unique situation where a topological and a non-topological, easily tunable and potentially superconducting, metallic state are confined to the same region of space.
△ Less
Submitted 15 September, 2010;
originally announced September 2010.
-
An Optimal Trade-off between Content Freshness and Refresh Cost
Authors:
Yibei Ling,
Jie Mi
Abstract:
Caching is an effective mechanism for reducing bandwidth usage and alleviating server load. However, the use of caching entails a compromise between content freshness and refresh cost. An excessive refresh allows a high degree of content freshness at a greater cost of system resource. Conversely, a deficient refresh inhibits content freshness but saves the cost of resource usages. To address the f…
▽ More
Caching is an effective mechanism for reducing bandwidth usage and alleviating server load. However, the use of caching entails a compromise between content freshness and refresh cost. An excessive refresh allows a high degree of content freshness at a greater cost of system resource. Conversely, a deficient refresh inhibits content freshness but saves the cost of resource usages. To address the freshness-cost problem, we formulate the refresh scheduling problem with a generic cost model and use this cost model to determine an optimal refresh frequency that gives the best tradeoff between refresh cost and content freshness. We prove the existence and uniqueness of an optimal refresh frequency under the assumptions that the arrival of content update is Poisson and the age-related cost monotonically increases with decreasing freshness. In addition, we provide an analytic comparison of system performance under fixed refresh scheduling and random refresh scheduling, showing that with the same average refresh frequency two refresh schedulings are mathematically equivalent in terms of the long-run average cost.
△ Less
Submitted 2 August, 2010;
originally announced August 2010.
-
An Improved Limit on the Muon Electric Dipole Moment
Authors:
G. W. Bennett,
B. Bousquet,
H. N. Brown,
G. Bunce,
R. M. Carey,
P. Cushman,
G. T. Danby,
P. T. Debevec,
M. Deile,
H. Deng,
W. Deninger,
S. K. Dhawan,
V. P. Druzhinin,
L. Duong,
E. Efstathiadis,
F. J. M. Farley,
G. V. Fedotovich,
S. Giron,
F. E. Gray,
D. Grigoriev,
M. Grosse-Perdekamp,
A. Grossmann,
M. F. Hare,
D. W. Hertzog,
X. Huang
, et al. (51 additional authors not shown)
Abstract:
Three independent searches for an electric dipole moment (EDM) of the positive and negative muons have been performed, using spin precession data from the muon g-2 storage ring at Brookhaven National Laboratory. Details on the experimental apparatus and the three analyses are presented. Since the individual results on the positive and negative muon, as well as the combined result, d=-0.1(0.9)E-1…
▽ More
Three independent searches for an electric dipole moment (EDM) of the positive and negative muons have been performed, using spin precession data from the muon g-2 storage ring at Brookhaven National Laboratory. Details on the experimental apparatus and the three analyses are presented. Since the individual results on the positive and negative muon, as well as the combined result, d=-0.1(0.9)E-19 e-cm, are all consistent with zero, we set a new muon EDM limit, |d| < 1.9E-19 e-cm (95% C.L.). This represents a factor of 5 improvement over the previous best limit on the muon EDM.
△ Less
Submitted 26 July, 2009; v1 submitted 7 November, 2008;
originally announced November 2008.
-
Three-photon absorption in water-soluble ZnS nanocrystals
Authors:
Jun He,
Wei Ji,
Jun Mi,
Yuangang Zheng,
Jackie Y. Ying
Abstract:
We report on large three-photon absorption (3PA) in glutathione-capped ZnS semiconductor nanocrystals (NCs), determined by both Z-scan and transient transmission techniques with 120-fs laser pulses. The monodispersed, water-soluble ZnS NCs are synthesized by a modified protocol with a mean diameter of 2.5 nm. Their 3PA cross-section is determined to be around 2.7x10^-78 cm^6s^2photon^-2 at an op…
▽ More
We report on large three-photon absorption (3PA) in glutathione-capped ZnS semiconductor nanocrystals (NCs), determined by both Z-scan and transient transmission techniques with 120-fs laser pulses. The monodispersed, water-soluble ZnS NCs are synthesized by a modified protocol with a mean diameter of 2.5 nm. Their 3PA cross-section is determined to be around 2.7x10^-78 cm^6s^2photon^-2 at an optimal wavelength of commercial Ti:sapphire femtosecond lasers. This value is nearly one order of magnitude greater than that of CdS NCs, and four to five orders of magnitude higher than those of the previously reported common UV fluorescent dyes.
△ Less
Submitted 5 May, 2006;
originally announced May 2006.
-
Observation of Saturable and Reverse Saturable Absorption at Longitudinal Surface Plasmon Resonance in Gold Nanorods
Authors:
Hendry I. Elim,
Jian Yang,
Jim-Yang Lee,
Jun Mi,
Wei Ji
Abstract:
Saturable and reverse saturable absorption at longitudinal surface plasmon resonance (SPR) in gold nanorods (Au NRs) have been observed using Z-scan and transient absorption techniques with femtosecond laser pulses. At lower excitation irradiances, the wavelength dispersion of saturable absorption has been determined near the longitudinal mode of SPR with a recovery time determined to be a few t…
▽ More
Saturable and reverse saturable absorption at longitudinal surface plasmon resonance (SPR) in gold nanorods (Au NRs) have been observed using Z-scan and transient absorption techniques with femtosecond laser pulses. At lower excitation irradiances, the wavelength dispersion of saturable absorption has been determined near the longitudinal mode of SPR with a recovery time determined to be a few ten picoseconds on the SPR resonance. With higher excitation irradiances, reverse saturable absorption occurs and becomes dominant. The underlying mechanisms are discussed. Such reversible saturable absorption makes Au NRs an ideal candidate for optical limiting applications.
△ Less
Submitted 28 April, 2006;
originally announced April 2006.
-
Three photon absorption in ZnO and ZnS crystals
Authors:
Jun He,
Yingli Qu,
He** Li,
Jun Mi,
Wei Ji
Abstract:
We report a systematic investigation of both three-photon absorption (3PA)spectra and wavelength dispersions of Kerr-type nonlinear refraction in wide-gap semiconductors. The Z-scan measurements are recorded for both ZnO and ZnS with femtosecond laser pulses. While the wavelength dispersions of the Kerr nonlinearity are in agreement with a two-band model, the wavelength dependences of the 3PA ar…
▽ More
We report a systematic investigation of both three-photon absorption (3PA)spectra and wavelength dispersions of Kerr-type nonlinear refraction in wide-gap semiconductors. The Z-scan measurements are recorded for both ZnO and ZnS with femtosecond laser pulses. While the wavelength dispersions of the Kerr nonlinearity are in agreement with a two-band model, the wavelength dependences of the 3PA are found to be given by (3Ephoton/Eg-1)5/2(3Ephoton/Eg)-9. We also evaluate higher-order nonlinear optical effects including the fifth-order instantaneous nonlinear refraction associated with virtual three-photon transitions, and effectively seventh-order nonlinear processes induced by three-photon-excited free charge carriers. These higher-order nonlinear effects are insignificant with laser excitation irradiances up to 40 GW/cm2. Both pump-probe measurements and three-photon figures of merits demonstrate that ZnO and ZnS should be a promising candidate for optical switching applications at telecommunication wavelengths.
△ Less
Submitted 16 November, 2005;
originally announced November 2005.
-
Observation of Interband Two-Photon Absorption Saturation in CdS Nanocrystals
Authors:
Jun He,
Jun Mi,
He** Li,
Wei Ji
Abstract:
We report the observation of interband two-photon absorption (TPA) saturation in cadmium sulfide nanocrystals (CdS NCs) under intense femtosecond laser excitation with 1.6-eV photon energy. The observation has been compared to interband TPA saturation in bulk CdS under the same experimental conditions. By using both Z-scan technique and transient absorption measurement, the saturation intensity…
▽ More
We report the observation of interband two-photon absorption (TPA) saturation in cadmium sulfide nanocrystals (CdS NCs) under intense femtosecond laser excitation with 1.6-eV photon energy. The observation has been compared to interband TPA saturation in bulk CdS under the same experimental conditions. By using both Z-scan technique and transient absorption measurement, the saturation intensity has been determined to be 190 GW/cm^2 for CdS NCs of 4-nm diameter, which shows two orders of magnitude greater than that for CdS bulk crystal. The results are in agreement with an inhomogeneously-broadened, saturated TPA model.
△ Less
Submitted 15 October, 2005;
originally announced October 2005.