Showing 1–10 of 10 results for author: Meyer, T L

Nanoscale self-templating for oxide epitaxy with large symmetry mismatch

Authors: Xiang Gao, Shinbuhm Lee, John Nichols, Tricia L. Meyer, Thomas Z. Ward, Matthew F. Chisholm, Ho Nyung Lee

Abstract: Direct observations using scanning transmission electron microscopy unveil an intriguing interfacial bi-layer that enables epitaxial growth of a strain-free, monoclinic, bronze-phase VO2(B) thin film on a perovskite SrTiO3 (STO) substrate. We observe an ultrathin (2-3 unit cells) interlayer best described as highly strained VO2(B) nanodomains combined with an extra (Ti,V)O2 layer on the TiO2 termi… ▽ More Direct observations using scanning transmission electron microscopy unveil an intriguing interfacial bi-layer that enables epitaxial growth of a strain-free, monoclinic, bronze-phase VO2(B) thin film on a perovskite SrTiO3 (STO) substrate. We observe an ultrathin (2-3 unit cells) interlayer best described as highly strained VO2(B) nanodomains combined with an extra (Ti,V)O2 layer on the TiO2 terminated STO (001) surface. By forming a fully coherent interface with the STO substrate and a semi-coherent interface with the strain-free epitaxial VO2(B) film above, the interfacial bi-layer enables the epitaxial connection of the two materials despite their large symmetry and lattice mismatch. △ Less

Submitted 26 September, 2016; originally announced September 2016.

Comments: 16 pages, 4 figures

Enhancing interfacial magnetization with a ferroelectric

Authors: Tricia L. Meyer, 1 Andreas Herklotz, Valeria Lauter, John W. Freeland, John Nichols, Er-Jia Guo, Shinbuhm Lee, T. Zac Ward, Nina Balke, Sergei V. Kalinin, Michael R. Fitzsimmons, Ho Nyung Lee

Abstract: Ferroelectric control of interfacial magnetism has attracted much attention. However, the coupling of these two functionalities has not been understood well at the atomic scale. The lack of scientific progress is mainly due to the limited characterization methods by which the interface's magnetic properties can be probed at an atomic level. Here, we use polarized neutron reflectometry (PNR) to pro… ▽ More Ferroelectric control of interfacial magnetism has attracted much attention. However, the coupling of these two functionalities has not been understood well at the atomic scale. The lack of scientific progress is mainly due to the limited characterization methods by which the interface's magnetic properties can be probed at an atomic level. Here, we use polarized neutron reflectometry (PNR) to probe the evolution of the magnetic moment at interfaces in ferroelectric/strongly correlated oxide [PbZr0.2Ti0.8O3/La0.8Sr0.2MnO3 (PZT/LSMO)] heterostructures. We find that there is always suppressed magnetization at the surface and interface of LSMO and such magnetic deterioration can be strongly improved by interfacing with a strongly polar PZT film. The magnetoelectric coupling of magnetism and ferroelectric polarization occurs within a couple of nanometers of the interface as demonstrated by the enhanced interfacial magnetization beyond the bulk value by 5% depending on the polarization of PZT. The latter value is 70% higher than the surface magnetization of a LSMO film without interfacing with a ferroelectric layer. These compelling results not only probe the presence of nanoscale magnetic suppression and its control by ferroelectrics, but also emphasize the importance of utilizing probing techniques that can distinguish between bulk and interfacial phenomena. △ Less

Submitted 13 September, 2016; originally announced September 2016.

Journal ref: Phys. Rev. B 94, 174432 (2016)

Emerging magnetism and anomalous Hall effect in iridate-manganite heterostructures

Authors: John Nichols, Xiang Gao, Shinbuhm Lee, Tricia L. Meyer, John W. Freeland, Valeria Lauter, Di Yi, Jian Liu, Daniel Haskel, Jonathan R. Petrie, Er-Jia Guo, Andreas Herklotz, Dongkyu Lee, Thomas Z. Ward, Gyula Eres, Michael R. Fitzsimmons, Ho Nyung Lee

Abstract: Strong Coulomb repulsion and spin-orbit coupling are known to give rise to exotic physical phenomena in transition metal oxides. Initial attempts to investigate systems where both of these fundamental interactions are comparably strong, such as 3d and 5d complex oxide superlattices, have revealed properties that only slightly differ from the bulk ones of the constituent materials. Here, we observe… ▽ More Strong Coulomb repulsion and spin-orbit coupling are known to give rise to exotic physical phenomena in transition metal oxides. Initial attempts to investigate systems where both of these fundamental interactions are comparably strong, such as 3d and 5d complex oxide superlattices, have revealed properties that only slightly differ from the bulk ones of the constituent materials. Here, we observe that the interfacial coupling between the 3d antiferromagnetic insulator SrMnO3 and the 5d paramagnetic metal SrIrO3 is enormously strong, yielding an anomalous Hall response as the result of charge transfer driven interfacial ferromagnetism. These findings show that low dimensional spin-orbit entangled 3d-5d interfaces provide an avenue to uncover technologically relevant physical phenomena unattainable in bulk materials. △ Less

Submitted 7 September, 2016; originally announced September 2016.

Journal ref: Nat. Commun. 7:12721 (2016)

Enhancing Perovskite Electrocatalysis through Strain Tuning of the Oxygen Deficiency

Authors: Jonathan R. Petrie, Hyoungjeen Jeen, Sara C. Barron, Tricia L. Meyer, Ho Nyung Lee

Abstract: Oxygen vacancies in transition metal oxides facilitate catalysis critical for energy storage and generation. However, it has proven elusive to promote vacancies at the lower temperatures required for operation in devices such as metal-air batteries and portable fuel cells. Here, we use thin films of the perovskite-based strontium cobaltite (SrCoOx) to show that epitaxial strain is a powerful tool… ▽ More Oxygen vacancies in transition metal oxides facilitate catalysis critical for energy storage and generation. However, it has proven elusive to promote vacancies at the lower temperatures required for operation in devices such as metal-air batteries and portable fuel cells. Here, we use thin films of the perovskite-based strontium cobaltite (SrCoOx) to show that epitaxial strain is a powerful tool towards manipulating the oxygen content under conditions consistent with the oxygen evolution reaction, yielding increasingly oxygen deficient states in an environment where the cobaltite would normally be fully oxidized. The additional oxygen vacancies created through tensile strain enhance the cobaltite catalytic activity towards this important reaction by over an order of magnitude, equaling that of precious metal catalysts, including IrO2. Our findings demonstrate that strain in these oxides can dictate oxygen stoichiometry independent of ambient conditions, allowing unprecedented control over oxygen vacancies essential in catalysis near room temperature. △ Less

Submitted 7 June, 2016; originally announced June 2016.

Strain Control of Oxygen Vacancies in Epitaxial Strontium Cobaltite Films

Authors: Jonathan R. Petrie, Chandrima Mitra, Hyoungjeen Jeen, Woo Seok Choi, Tricia L. Meyer, Fernando A. Reboredo, John W. Freeland, Gyula Eres, Ho Nyung Lee

Abstract: The ability to manipulate oxygen anion defects rather than metal cations in complex oxides can facilitate creating new functionalities critical for emerging energy and device technologies. However, the difficulty in activating oxygen at reduced temperatures hinders the deliberate control of important defects, oxygen vacancies. Here, strontium cobaltite (SrCoOx) is used to demonstrate that epitaxia… ▽ More The ability to manipulate oxygen anion defects rather than metal cations in complex oxides can facilitate creating new functionalities critical for emerging energy and device technologies. However, the difficulty in activating oxygen at reduced temperatures hinders the deliberate control of important defects, oxygen vacancies. Here, strontium cobaltite (SrCoOx) is used to demonstrate that epitaxial strain is a powerful tool for manipulating the oxygen vacancy concentration even under highly oxidizing environments and at annealing temperatures as low as 300 C. By applying a small biaxial tensile strain (2%), the oxygen activation energy barrier decreases by ~30%, resulting in a tunable oxygen deficient steady-state under conditions that would normally fully oxidize unstrained cobaltite. These strain-induced changes in oxygen stoichiometry drive the cobaltite from a ferromagnetic metal towards an antiferromagnetic insulator. The ability to decouple the oxygen vacancy concentration from its typical dependence on the operational environment is useful for effectively designing oxides materials with a specific oxygen stoichiometry. △ Less

Submitted 12 February, 2016; originally announced February 2016.

Enhanced bifunctional oxygen catalysis in strained LaNiO3 perovskites

Authors: Jonathan R Petrie, Valentino R. Cooper, John W Freeland, Tricia L Meyer, Zhiyong Zhang, Daniel A. Lutterman, Ho Nyung Lee

Abstract: Strain is known to greatly influence low temperature oxygen electrocatalysis on noble metal films, leading to significant enhancements in bifunctional activity essential for fuel cells and metal-air batteries. However, its catalytic impact on transition metal oxide thin films, such as perovskites, is not widely understood. Here, we epitaxially strain the conducting perovskite LaNiO3 to systematica… ▽ More Strain is known to greatly influence low temperature oxygen electrocatalysis on noble metal films, leading to significant enhancements in bifunctional activity essential for fuel cells and metal-air batteries. However, its catalytic impact on transition metal oxide thin films, such as perovskites, is not widely understood. Here, we epitaxially strain the conducting perovskite LaNiO3 to systematically determine its influence on both the oxygen reduction and oxygen evolution reaction. Uniquely, we found that compressive strain could significantly enhance both reactions, yielding a bifunctional catalyst that surpasses the performance of noble metals such as Pt. We attribute the improved bifunctionality to strain-induced splitting of the eg orbitals, which can customize orbital asymmetry at the surface. Analogous to strain-induced shifts in the d-band center of noble metals relative to Fermi level, such splitting can dramatically affect catalytic activity in this perovskite and other potentially more active oxides. △ Less

Submitted 11 February, 2016; originally announced February 2016.

Symmetry-driven atomic rearrangement at a brownmillerite-perovskite interface

Authors: Tricia L. Meyer, Hyoungjeen Jeen, Xiang Gao, Jonathan R. Petrie, Matthew F. Chisholm, Ho Nyung Lee

Abstract: Many of the recent advancements in oxide heterostructures have been attributed to modification of spin, charge, lattice, and orbital order parameters at atomically well-defined interfaces. However, the details on the structural, chemical, and electrostatic evolution of interfaces comprised of materials with different crystallographic symmetries remain to be understood. In this work, we have mapped… ▽ More Many of the recent advancements in oxide heterostructures have been attributed to modification of spin, charge, lattice, and orbital order parameters at atomically well-defined interfaces. However, the details on the structural, chemical, and electrostatic evolution of interfaces comprised of materials with different crystallographic symmetries remain to be understood. In this work, we have mapped out the interfacial connectivity of atoms of two dissimilar materials, the perovskite SrTiO3 and the brownmillerite SrCoO2.5, using high resolution scanning transmission electron microscopy and geometric phase analysis. We observed unique symmetry-mismatch driven atomic displacements restricted to only the first few atomic layers, which can critically modify the properties of the system. Provided that SrCoO2.5 is a promising energy material due to its open framework structure, the improved understanding of the interfacial structure on the atomic level can lead to the rational design of novel oxide heterostructures. △ Less

Submitted 19 November, 2015; originally announced November 2015.

Journal ref: Adv. Electron. Mater. 1, 1500201 (2015)

Selective control of oxygen sublattice stability by epitaxial strain in Ruddlesden-Popper films

Authors: Tricia L. Meyer, Lu Jiang, Jaekwang Lee, Mina Yoon, John W. Freeland, Jae Hyuck Jang, Dilpuneet S. Aidhy, Albina Borisevich, Matthew Chisholm, Takeshi Egami, Ho Nyung Lee

Abstract: Oxygen-defect control has long been considered an influential tuning knob for producing various property responses in complex oxide films. In addition to physical property changes, modification to the lattice structure, specifically lattice expansion, with increasing oxygen vacancy concentrations has been reported often and has become the convention for oxide materials. However, the current unders… ▽ More Oxygen-defect control has long been considered an influential tuning knob for producing various property responses in complex oxide films. In addition to physical property changes, modification to the lattice structure, specifically lattice expansion, with increasing oxygen vacancy concentrations has been reported often and has become the convention for oxide materials. However, the current understanding of the lattice behavior in oxygen-deficient films becomes disputable when considering compounds containing different bonding environments or atomic layering. Moreover, tensile strain has recently been discovered to stabilize oxygen vacancies in epitaxial films, which further complicates the interpretation of lattice behavior resulting from their appearance. Here, we report on the selective strain control of oxygen vacancy formation and resulting lattice responses in the layered, Ruddlesden-Popper phases, La1.85Sr0.15CuO4. We found that a drastically reduced Gibbs free energy for oxygen vacancy formation near the typical growth temperature for tensile-strained epitaxial LSCO accounts for the large oxygen non-stoichiometry. Additionally, oxygen vacancies form preferentially in the equatorial position of the CuO2 plane, leading to a lattice contraction, rather than the expected expansion, observed with apical oxygen vacancies. Since oxygen stoichiometry plays a key role in determining the physical properties of many complex oxides, the strong strain coupling of oxygen nonstoichiometry and the unusual structural response reported here can provide new perspectives and understanding to the structure and property relationships of many other functional oxide materials. △ Less

Submitted 27 August, 2015; originally announced August 2015.

Journal ref: APL Mater. 3, 126102 (2015)

Growth control of the oxidation state in vanadium oxide thin films

Authors: Shinbuhm Lee, Tricia L. Meyer, Sungkyun Park, Takeshi Egami, Ho Nyung Lee

Abstract: Precise control of the chemical valence or oxidation state of vanadium in vanadium oxide thin films is highly desirable for not only fundamental research, but also technological applications that utilize the subtle change in the physical properties originating from the metal- insulator transition (MIT) near room temperature. However, due to the multivalent nature of vanadium and the lack of a good… ▽ More Precise control of the chemical valence or oxidation state of vanadium in vanadium oxide thin films is highly desirable for not only fundamental research, but also technological applications that utilize the subtle change in the physical properties originating from the metal- insulator transition (MIT) near room temperature. However, due to the multivalent nature of vanadium and the lack of a good understanding on growth control of the oxidation state, stabilization of phase pure vanadium oxides with a single oxidation state is extremely challenging. Here, we systematically varied the growth conditions to clearly map out the growth window for preparing phase pure epitaxial vanadium oxides by pulsed laser deposition for providing a guideline to grow high quality thin films with well-defined oxidation states of V2(+3)O3, V(+4)O2, and V2(+5)O5. A well pronounced MIT was only observed in VO2 films grown in a very narrow range of oxygen partial pressure P(O2). The films grown either in lower (< 10 mTorr) or higher P(O2) (> 25 mTorr) result in V2O3 and V2O5 phases, respectively, thereby suppressing the MIT for both cases. We have also found that the resistivity ratio before and after the MIT of VO2 thin films can be further enhanced by one order of magnitude when the films are further oxidized by post-annealing at a well-controlled oxidizing ambient. This result indicates that stabilizing vanadium into a single valence state has to compromise with insufficient oxidation of an as grown thin film and, thereby, a subsequent oxidation is required for an improved MIT behavior. △ Less

Submitted 28 November, 2014; originally announced November 2014.

Comments: 16 pages, 4 figures

Probing the Spin Pum** Mechanism: Exchange Coupling with Exponential Decay in Y3Fe5O12/barrier/Pt Heterostructures

Authors: C. H. Du, H. L. Wang, Y. Pu, T. L. Meyer, P. M. Woodward, F. Y. Yang, P. C. Hammel

Abstract: Ferromagnetic resonance driven spin pum** of pure spin currents from a ferromagnet into a nonmagnetic material promises new spin-functional devices with low energy consumption. The mechanism of spin pum** is under intense investigation and it is widely believed that exchange interaction between the ferromagnet and nonmagnetic material is responsible for this phenomenon. We observe a thousand-f… ▽ More Ferromagnetic resonance driven spin pum** of pure spin currents from a ferromagnet into a nonmagnetic material promises new spin-functional devices with low energy consumption. The mechanism of spin pum** is under intense investigation and it is widely believed that exchange interaction between the ferromagnet and nonmagnetic material is responsible for this phenomenon. We observe a thousand-fold exponential decay of the spin pum** from 20-nm thick Y3Fe5O12 films to platinum across insulating barriers, from which the exponential decay lengths of 0.16 and 0.23 nm are extracted for oxide barriers with band gaps of 4.93 eV and 2.36 eV, respectively. This prototypical signature of quantum tunneling through a barrier underscores the importance of exchange coupling for spin pum** and reveals its dependence on the characteristics of the barrier material. △ Less

Submitted 10 July, 2013; v1 submitted 6 July, 2013; originally announced July 2013.

Comments: 19 papges, 5 figures

Journal ref: Phys. Rev. Lett. 111, 247202 (2013)