Showing 1–45 of 45 results for author: Metzger, T

Rocket Exhaust Blowing Soil in Near Vacuum Conditions is Faster than Predicted by Continuum Scaling Laws

Authors: Philip T. Metzger

Abstract: Experiments were performed to study how rocket exhaust blows soil in lunar and Martian conditions. Jets of gas were blown downwardly at various granular materials while a camera recorded the formation of scour holes as the material was removed. The experiments were performed in a series of conditions ranging from ambient 101 kPa pressure down to 0.3 kPa. This includes the range that is relevant fo… ▽ More Experiments were performed to study how rocket exhaust blows soil in lunar and Martian conditions. Jets of gas were blown downwardly at various granular materials while a camera recorded the formation of scour holes as the material was removed. The experiments were performed in a series of conditions ranging from ambient 101 kPa pressure down to 0.3 kPa. This includes the range that is relevant for lunar conditions, because it is not hard vacuum inside the rocket exhaust where soil is being eroded. Prior work in ambient conditions showed that erosion rate is proportional to the square of the densimetric Froude number. However, the prior work was not performed at low pressures. In the new work, preliminary results show that as the gas density is so low that gas flow around the sand grains is no longer in the continuum regime, then erosion rate is faster than predicted by the earlier results. The dependency of erosion rate on various parameters is determined, but it turns out to be more complex than expected so additional experimental work will be required to develop complete scaling relationships. △ Less

Submitted 21 June, 2024; originally announced June 2024.

Comments: 9 pages, 7 figures. ASCE Earth & Space 2016 conference

Journal ref: Proceedings of 15th Biennial ASCE Conference on Engineering, Science, Construction, and Operations in Challenging Environments (Earth & Space 2016), pp. 58-66. Reston, VA: American Society of Civil Engineers, 2016

Bayesian Model Selection with Latent Group-Based Effects and Variances with the R Package slgf

Authors: Thomas A. Metzger, Christopher T. Franck

Abstract: Linear modeling is ubiquitous, but performance can suffer when the model is misspecified. We have recently demonstrated that latent grou**s in the levels of categorical predictors can complicate inference in a variety of fields including bioinformatics, agriculture, industry, engineering, and medicine. Here we present the R package slgf which enables the user to easily implement our recently-dev… ▽ More Linear modeling is ubiquitous, but performance can suffer when the model is misspecified. We have recently demonstrated that latent grou**s in the levels of categorical predictors can complicate inference in a variety of fields including bioinformatics, agriculture, industry, engineering, and medicine. Here we present the R package slgf which enables the user to easily implement our recently-developed approach to detect group-based regression effects, latent interactions, and/or heteroscedastic error variance through Bayesian model selection. We focus on the scenario in which the levels of a categorical predictor exhibit two latent groups. We treat the detection of this grou** structure as an unsupervised learning problem by searching the space of possible grou**s of factor levels. First we review the suspected latent grou** factor (SLGF) method. Next, using both observational and experimental data, we illustrate the usage of slgf in the context of several common linear model layouts: one-way analysis of variance (ANOVA), analysis of covariance (ANCOVA), a two-way replicated layout, and a two-way unreplicated layout. We have selected data that reveal the shortcomings of classical analyses to emphasize the advantage our method can provide when a latent grou** structure is present. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Comments: 17 pages, 5 figures

Impulsive Fermi magnon-phonon resonance in antiferromagnetic $CoF_{2}$

Authors: Thomas W. J. Metzger, Kirill A. Grishunin, Chris Reinhoffer, Roman M. Dubrovin, Atiqa Arshad, Igor Ilyakov, Thales V. A. G. de Oliveira, Alexey Ponomaryov, Jan-Christoph Deinert, Sergey Kovalev, Roman V. Pisarev, Mikhail I. Katsnelson, Boris A. Ivanov, Paul H. M. van Loosdrecht, Alexey V. Kimel, Evgeny A. Mashkovich

Abstract: Understanding spin-lattice interactions in antiferromagnets is one of the most fundamental issues at the core of the recently emerging and booming fields of antiferromagnetic spintronics and magnonics. Recently, coherent nonlinear spin-lattice coupling was discovered in an antiferromagnet which opened the possibility to control the nonlinear coupling strength and thus showing a novel pathway to co… ▽ More Understanding spin-lattice interactions in antiferromagnets is one of the most fundamental issues at the core of the recently emerging and booming fields of antiferromagnetic spintronics and magnonics. Recently, coherent nonlinear spin-lattice coupling was discovered in an antiferromagnet which opened the possibility to control the nonlinear coupling strength and thus showing a novel pathway to coherently control magnon-phonon dynamics. Here, utilizing intense narrow band terahertz (THz) pulses and tunable magnetic fields up to 7 T, we experimentally realize the conditions of the Fermi magnon-phonon resonance in antiferromagnetic $CoF_{2}$. These conditions imply that both the spin and the lattice anharmonicities harvest energy transfer between the subsystems, if the magnon eigenfrequency $f_{m}$ is twice lower than the frequency of the phonon $2f_{m}=f_{ph}$. Performing THz pump-infrared probe spectroscopy in conjunction with simulations, we explore the coupled magnon-phonon dynamics in the vicinity of the Fermi-resonance and reveal the corresponding fingerprints of an impulsive THz-induced response. This study focuses on the role of nonlinearity in spin-lattice interactions, providing insights into the control of coherent magnon-phonon energy exchange. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Lunar Cold Trap Contamination by Landing Vehicles

Authors: Scott T. Shipley, John E. Lane, Philip T. Metzger

Abstract: Tools have been developed to model and simulate the effects of lunar landing vehicles on the lunar environment, mostly addressing the effects of regolith erosion by rocket plumes and the fate of the ejected lunar soil particles. The KSC Granular Mechanics and Regolith Operations Lab tools have now been expanded to address volatile contamination of the lunar surface (Stern, 1999). Landing nearby su… ▽ More Tools have been developed to model and simulate the effects of lunar landing vehicles on the lunar environment, mostly addressing the effects of regolith erosion by rocket plumes and the fate of the ejected lunar soil particles. The KSC Granular Mechanics and Regolith Operations Lab tools have now been expanded to address volatile contamination of the lunar surface (Stern, 1999). Landing nearby such a crater will result in the migration of significant exhaust plume gas into the cold trap of the crater, and will also create an unnatural atmosphere over the volatile reservoirs that are to be studied. Our calculations address: 1) the time for the plume-induced local atmosphere above cold traps to decay to normal levels, 2) the efficiency of gas migration into a permanently shadowed crater when the landing is outside it but nearby, and 3) reduction on contamination afforded by moving the landing site further from the crater or by topographically shielding the crater from the direct flux of a lander's ground jet. We also address plume volatiles adsorbed onto and driven inside soil ejecta particles from their residence in the high pressure stagnation region of the engine exhaust plume, and how their mechanical dispersal across the lunar surface contributes to the induced atmosphere. One additional question is whether the collection of soil ejecta along the base of a topographic feature will produce a measurable plume volatile release distinct from the background. We mostly address item 2). Item 3) is obvious from our results excepting that the removal distances may be large, but changes to landing strategy can improve the situation. △ Less

Submitted 7 June, 2023; originally announced June 2023.

Comments: 13 pages, 18 figures. Presented at Earth & Space 2014 conference

Thermal Extraction of Volatiles from Lunar and Asteroid Regolith in Axisymmetric Crank-Nicholson Modeling

Authors: Philip T. Metzger, Kris Zacny, Phillip Morrison

Abstract: A physics-based computer model has been developed to support the development of volatile extraction from regolith of the Moon and asteroids. The model is based upon empirical data sets for extraterrestrial soils and simulants, including thermal conductivity of regolith and mixed composition ice, heat capacity of soil and mixed composition ice, hydrated mineral volatile release patterns, and sublim… ▽ More A physics-based computer model has been developed to support the development of volatile extraction from regolith of the Moon and asteroids. The model is based upon empirical data sets for extraterrestrial soils and simulants, including thermal conductivity of regolith and mixed composition ice, heat capacity of soil and mixed composition ice, hydrated mineral volatile release patterns, and sublimation of ice. A new thermal conductivity relationship is derived that generalizes cases of regolith with varying temperature, soil porosity, and pore vapor pressure. Ice composition is based upon measurements of icy ejecta from the Lunar CRater Observation and Sensing Satellite (LCROSS) impact and it is shown that thermal conductivity and heat capacity equations for water ice provide adequate accuracy at the present level of development. The heat diffusion equations are integrated with gas diffusion equations using multiple adaptive timesteps. The entire model is placed into a Crank-Nicholson framework where the finite difference formalism was extended to two dimensions in axisymmetry. The one-dimensional version of the model successfully predicts heat transfer that matches lunar and asteroid data sets. The axisymmetric model has been used to study heat dissipation around lunar drills and water extraction in asteroid coring devices. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Comments: 50 pages, 23 figures

Journal ref: J. Aerospace Engineering 33, no.6 (Nov. 2020): 04020075

Results of the 2015 Workshop on Asteroid Simulants

Authors: Philip T. Metzger, Daniel T. Britt, Stephen D. Covey, John S. Lewis

Abstract: The first asteroid simulants workshop was held in late 2015. These materials are needed for tests of technologies and mission operational concepts, for training astronauts , for medical studies, and a variety of other purposes. The new program is based on lessons learned from the earlier lunar simulants program. It aims to deliver families of simulants for major spectral classes of asteroids both… ▽ More The first asteroid simulants workshop was held in late 2015. These materials are needed for tests of technologies and mission operational concepts, for training astronauts , for medical studies, and a variety of other purposes. The new program is based on lessons learned from the earlier lunar simulants program. It aims to deliver families of simulants for major spectral classes of asteroids both in cobble and regolith form, beginning with one type of carbonaceous chondrite and rapidly expanding to provide four to six more asteroid classes. These simulants will replicate a selected list of asteroid properties, but not all known properties, in order to serve the greatest number of users at an affordable price. They will be benchmarked by a variety of data sets including laboratory analysis of meteorites, observation of bolides, remote sensing of asteroids, data from asteroid missions, and scientific modeling. A variety of laboratory tests will verify the as-manufactured simulants are accurately and repeatedly providing the specified characteristics. △ Less

Submitted 5 June, 2023; originally announced June 2023.

Comments: 13 pages, no figures. Presented at Earth & Space 2016 conference

Soil Test Apparatus for Lunar Surfaces

Authors: Laila A. Rahmatian, Philip T. Metzger

Abstract: We have studied several field geotechnical test instruments for their applicability to lunar soil simulants and analog soils. Their performance was evaluated in a series of tests in lunar simulants JSC-1A, NU-LHT-2M, and CHENOBI each prepared in carefully controlled states of compaction through vibration on a shake table with overburden. In general, none of the instruments is adequate for a low-co… ▽ More We have studied several field geotechnical test instruments for their applicability to lunar soil simulants and analog soils. Their performance was evaluated in a series of tests in lunar simulants JSC-1A, NU-LHT-2M, and CHENOBI each prepared in carefully controlled states of compaction through vibration on a shake table with overburden. In general, none of the instruments is adequate for a low-cohesion, frictional soil, but we find that a modified version of a shear vane tester allows us to extract several of the important soil parameters. This modified instrument may be useful for use on the lunar surface by astronauts or a robotic lander. We have also found that JSC-1A does not behave mechanically like the other lunar soil simulants, probably because its particle shapes are more rounded. Furthermore we have studied a soil material, BP-1, identified as very lunar-like at a lunar analog location. We find this material has a natural particle size distribution similar to that of lunar soil and arguably better than JSC-1A. We find that BP-1 behaves very similarly to the high fidelity lunar simulants NU-LHT-2M and CHENOBI. △ Less

Submitted 1 June, 2023; originally announced June 2023.

Comments: 15 pages, 14 figures. Presented at Earth & Space 2010 conference

The Physical State of Lunar Soil in the Permanently Shadowed Craters of the Moon

Authors: Jacob N. Gamsky, Philip T. Metzger

Abstract: The physical state of the lunar soil in the permanently shadowed craters of the moon is inferred from experimental investigation. The permanently shadowed craters do not undergo the same thermal cycling experienced by other parts of the moon and therefore could be slightly less compacted. This study is significant because excavating, roving, and landing interactions, along with the energy budgets… ▽ More The physical state of the lunar soil in the permanently shadowed craters of the moon is inferred from experimental investigation. The permanently shadowed craters do not undergo the same thermal cycling experienced by other parts of the moon and therefore could be slightly less compacted. This study is significant because excavating, roving, and landing interactions, along with the energy budgets and deployment schedules for associated technology, need to be scaled and designed properly. Results indicate that the degree of compaction due to thermal cycling is a function of the depth in the soil column. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Comments: 6 pages, 3 figures. Presented at Earth & Space 2010 conference

Lagrangian Trajectory Modeling of Lunar Dust Particles

Authors: John E. Lane, Philip T. Metzger, Christopher D. Immer, Xiaoyi Li

Abstract: A mathematical model and software implementation developed to predict trajectories of single lunar dust particles acted on by a high velocity gas flow is discussed. The model uses output from a computation fluid dynamics (CFD) or direct simulation Monte Carlo (DSMC) simulation of a rocket nozzle hot gas jet. The gas density, velocity vector field, and temperature predicted by the CFD/DSMC simulati… ▽ More A mathematical model and software implementation developed to predict trajectories of single lunar dust particles acted on by a high velocity gas flow is discussed. The model uses output from a computation fluid dynamics (CFD) or direct simulation Monte Carlo (DSMC) simulation of a rocket nozzle hot gas jet. The gas density, velocity vector field, and temperature predicted by the CFD/DSMC simulations, provide the data necessary to compute the forces and accelerations acting on a single particle of regolith. All calculations of trajectory assume that the duration of particle flight is much shorter than the change in gas properties, i.e., the particle trajectory calculations take into account the spatial variation of the gas jet, but not the temporal variation. This is a reasonable first-order assumption. Final results are compared to photogrammetry derived estimates of dust angles form Apollo landing videos. △ Less

Submitted 31 May, 2023; originally announced May 2023.

Comments: 9 pages, 9 figures. Presented at Earth & Space 2008 conference

The Damage to Lunar Orbiting Spacecraft Caused by the Ejecta of Lunar Landers

Authors: Philip T. Metzger, James G. Mantovani

Abstract: This manuscript analyzes lunar lander soil erosion models and trajectory models to calculate how much damage will occur to spacecraft orbiting in the vicinity of the Moon. The soil erosion models have considerable uncertainty due to gaps in our understanding of the basic physics. The results for ~40 t landers show that the Lunar Orbital Gateway will be impacted by 1000s to 10,000s of particles per… ▽ More This manuscript analyzes lunar lander soil erosion models and trajectory models to calculate how much damage will occur to spacecraft orbiting in the vicinity of the Moon. The soil erosion models have considerable uncertainty due to gaps in our understanding of the basic physics. The results for ~40 t landers show that the Lunar Orbital Gateway will be impacted by 1000s to 10,000s of particles per square meter but the particle sizes are very small and the impact velocity is low so the damage will be slight. However, a spacecraft in Low Lunar Orbit that happens to pass through the ejecta sheet will sustain extensive damage with hundreds of millions of impacts per square meter: although they are small, they are in the hypervelocity regime, and exposed glass on the spacecraft will sustain spallation over 4% of its surface. △ Less

Submitted 20 May, 2023; originally announced May 2023.

Comments: 10 pagers, 8 figures

Journal ref: In Earth and Space 2021, pp. 136-145. 2021

Laser-guided lightning

Authors: Aurélien Houard, Pierre Walch, Thomas Produit, Victor Moreno, Benoit Mahieu, Antonio Sunjerga, Clemens Herkommer, Amirhossein Mostajabi, Ugo Andral, Yves-Bernard André, Magali Lozano, Laurent Bizet, Malte C. Schroeder, Guillaume Schimmel, Michel Moret, Mark Stanley, W. A. Rison, Oliver Maurice, Bruno Esmiller, Knut Michel, Walter Haas, Thomas Metzger, Marcos Rubinstein, Farhad Rachidi, Vernon Cooray , et al. (3 additional authors not shown)

Abstract: Electric currents circulating between charged clouds and the earth surface during lightning discharges are responsible for considerable damages and casualties. It is therefore important to develop better protection methods in addition to the traditional Franklin rod. Here we present the first demonstration that filaments formed by short and intense laser pulses can guide lightning discharges over… ▽ More Electric currents circulating between charged clouds and the earth surface during lightning discharges are responsible for considerable damages and casualties. It is therefore important to develop better protection methods in addition to the traditional Franklin rod. Here we present the first demonstration that filaments formed by short and intense laser pulses can guide lightning discharges over considerable distances. We believe that this experimental breakthrough will lead to progress in lightning protection and lightning physics. An experimental campaign was carried out on the Säntis Mountain in Northeastern Switzerland during the Summer of 2021 with a high repetition rate terawatt laser. The guiding of an upward negative lightning leader over a distance of 50 m was recorded by two separate high-speed cameras. The guiding of negative lightning leaders by laser filaments was corroborated in three other instances by VHF interferometric measurements, and the number of X-ray bursts detected during guided lightning events was significantly increased. While this research field has been very active for more than 20 years with many research groups around the world working to achieve this goal, this result demonstrates lightning guiding by lasers, which may lead to the development of a laser lightning rod. This work paves the way for new atmospheric applications of ultrashort lasers and represents a significant step forward in the development of a laser based lightning protection for airports, launchpads or large infrastructures. △ Less

Submitted 19 January, 2023; v1 submitted 8 July, 2022; originally announced July 2022.

Comments: Laser-guided lightning. Nat. Photon. (2023)

Journal ref: Nature Photonics 17, 231 (2023)

The Cost of Lunar Landing Pads with a Trade Study of Construction Methods

Authors: Philip T. Metzger, Greg W. Autry

Abstract: This study estimates the cost of building lunar landing pads and examines whether any construction methods are economically superior to others. Some proposed methods require large amounts of mass transported from the Earth, others require high energy consumption on the lunar surface, and others have a long construction time. Each of these factors contributes direct and indirect costs to lunar acti… ▽ More This study estimates the cost of building lunar landing pads and examines whether any construction methods are economically superior to others. Some proposed methods require large amounts of mass transported from the Earth, others require high energy consumption on the lunar surface, and others have a long construction time. Each of these factors contributes direct and indirect costs to lunar activities. The most important economic variables turn out to be the transportation cost to the lunar surface and the magnitude of the program delay cost imposed by a construction method. The cost of a landing pad depends sensitively on the optimization of the mass and speed of the construction equipment, so a minimum-cost set of equipment exists for each construction method within a specified economic scenario. Several scenarios have been analyzed across a range of transportation costs with both high and low program delay costs. It is found that microwave sintering is currently the most favorable method to build the inner, high temperature zone of a lunar landing pad, although other methods are within the range of uncertainty. The most favorable method to build the outer, low temperature zone of the landing pad is also sintering when transportation costs are high, but it switches to polymer infusion when transportation costs drop below about \$110K/kg to the lunar surface. It is estimated that the Artemis Basecamp could build a landing pad with a budgeted line-item cost of \$229M assuming that transportation costs will be reduced modestly from the current rate \$1M/kg to the lunar surface to \$300K/kg. A landing pad drops to \$130M when the transportation cost drops further to \$100K/kg, or to \$47M if transportation costs fall below \$10K/kg. Ultimately, landing pads can be built around the Moon at very low cost, due to economies of scale. △ Less

Submitted 30 April, 2022; originally announced May 2022.

Comments: 50 pages, 15 figures

Moons Are Planets: Scientific Usefulness Versus Cultural Teleology in the Taxonomy of Planetary Science

Authors: Philip T. Metzger, William M. Grundy, Mark Sykes, S. Alan Stern, James F. Bell III, Charlene E. Detelich, Kirby D. Runyon, Michael Summers

Abstract: We argue that taxonomical concept development is vital for planetary science as in all branches of science, but its importance has been obscured by unique historical developments. The literature shows that the concept of planet developed by scientists during the Copernican Revolution was theory-laden and pragmatic for science. It included both primaries and satellites as planets due to their commo… ▽ More We argue that taxonomical concept development is vital for planetary science as in all branches of science, but its importance has been obscured by unique historical developments. The literature shows that the concept of planet developed by scientists during the Copernican Revolution was theory-laden and pragmatic for science. It included both primaries and satellites as planets due to their common intrinsic, geological characteristics. About two centuries later the non-scientific public had just adopted heliocentrism and was motivated to preserve elements of geocentrism including teleology and the assumptions of astrology. This motivated development of a folk concept of planet that contradicted the scientific view. The folk taxonomy was based on what an object orbits, making satellites out to be non-planets and ignoring most asteroids. Astronomers continued to keep primaries and moons classed together as planets and continued teaching that taxonomy until the 1920s. The astronomical community lost interest in planets ca. 1910 to 1955 and during that period complacently accepted the folk concept. Enough time has now elapsed so that modern astronomers forgot this history and rewrote it to claim that the folk taxonomy is the one that was created by the Copernican scientists. Starting ca. 1960 when spacecraft missions were developed to send back detailed new data, there was an explosion of publishing about planets including the satellites, leading to revival of the Copernican planet concept. We present evidence that taxonomical alignment with geological complexity is the most useful scientific taxonomy for planets. It is this complexity of both primary and secondary planets that is a key part of the chain of origins for life in the cosmos. △ Less

Submitted 22 October, 2021; originally announced October 2021.

Comments: 68 pages, 16 figures. For supplemental data files, see https://www.philipmetzger.com/moons_are_planets/

Scaling of Erosion Rate in Subsonic Jet Experiments and Apollo Lunar Module Landings

Authors: Philip T. Metzger, John E. Lane, Christopher D. Immer, Jacob N. Gamsky, Whitney Hauslein, Xiaoyi Li, Robert C. Latta III, Carly M. Donahue

Abstract: Small scale jet-induced erosion experiments are useful for identifying the scaling of erosion with respect to the various physical parameters (gravity, grain size, gas velocity, gas density, grain density, etc.), and because they provide a data set for benchmarking numerical flow codes. We have performed experiments varying the physical parameters listed above (e.g., gravity was varied in reduced… ▽ More Small scale jet-induced erosion experiments are useful for identifying the scaling of erosion with respect to the various physical parameters (gravity, grain size, gas velocity, gas density, grain density, etc.), and because they provide a data set for benchmarking numerical flow codes. We have performed experiments varying the physical parameters listed above (e.g., gravity was varied in reduced gravity aircraft flights). In all these experiments, a subsonic jet of gas im**es vertically on a bed of sand or lunar soil simulant forming a localized scour hole beneath the jet. Videography captures the erosion and scour hole formation processes, and analysis of these videos post-test identifies the scaling of these processes. This has produced important new insights into the physics of erosion. Based on these insights, we have developed an erosion rate model that can be applied to generalized situations, such as the erosion of soil beneath a horizontal gas flow on a planetary surface. This is important to lunar exploration because the rate of erosion beneath the rocket exhaust plume of a landing spacecraft will determine the amount of sand-blasting damage that can be inflicted upon surrounding hardware. Although the rocket exhaust plume at the exit of the nozzle is supersonic, the boundary layer on the lunar surface where erosion occurs is subsonic. The model has been benchmarked through comparison with the Apollo landing videos, which show the blowing lunar soil, and computational fluid dynamics simulations of those landings. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Comments: 17 pages, 11 figures

Journal ref: 12th Biennial International Conference on Engineering, Construction, and Operations in Challenging Environments (Earth & Space 2010), March 14-17, 2010, Honolulu, Hawaii, United States

Lunar Dust Particles Blown By Lander Engine Exhaust in Rarefied and Compressible Flow

Authors: John E. Lane, Philip T. Metzger, Jeffrey W. Carlson

Abstract: Previously we presented a numerical model that predicts trajectories of lunar dust, soil, and gravel blown by the engine exhaust of a lunar lander. The model uses the gas density, velocity vector field, and temperature predicted by computational fluid dynamics (CFD) or Direct Simulation Monte Carlo (DSMC) simulations to compute the forces and accelerations acting on the regolith particles, one par… ▽ More Previously we presented a numerical model that predicts trajectories of lunar dust, soil, and gravel blown by the engine exhaust of a lunar lander. The model uses the gas density, velocity vector field, and temperature predicted by computational fluid dynamics (CFD) or Direct Simulation Monte Carlo (DSMC) simulations to compute the forces and accelerations acting on the regolith particles, one particle at a time (ignoring particle collisions until more advanced models are developed). Here we present significant improvements to the model, including the implementation of particle drag and lift formulas to account for the rarefaction and compressibility of the flow. It turns out that the drag force is reduced due to the rarefaction, but the lift is increased due to several effects such as particle rotation. A data matrix of particle sizes, engine thrusts (descent and ascent values for Altair), horizontal and vertical starting distances, and lander height above ground, have been tested using the latest version of the software. These results suggest that the previously reported 3 degree trajectory angle limit can be exceeded in several cases by as much as a factor of five. Particles that originate at a height of 1 cm above the surface from an outer crater rim can be propelled to angles of 5 degrees or more. Particles that start at 10 cm above the surface can be ejected with angles of up to 15 degrees. Mechanisms responsible for placing particles at starting heights above the surface may include the kinetics of horizontal collisions, as suggested by Discrete Element Method (DEM) simulations. We also present results showing the distance particles travel and their impact velocities. We then use the model to evaluate the effectiveness of berms or other methods to block the spray of soil at a lunar landing site. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Comments: 9 pages, 6 figures

Journal ref: 12th Biennial International Conference on Engineering, Construction, and Operations in Challenging Environments (Earth & Spac3 2010), March 14-17, 2010, Honolulu, Hawaii, United States

ISRU Implications for Lunar and Martian Plume Effects

Authors: Philip T. Metzger, Xiaoyi Li, Christopher D. Immer, John E. Lane

Abstract: Experiments, analyses, and simulations have shown that the engine exhaust plume of a Mars lander large enough for human spaceflight will create a deep crater in the martian soil, blowing ejecta to approximately 1 km distance, damaging the bottom of the lander with high-momentum rock impacts, and possibly tilting the lander as the excavated hole collapses to become a broad residual crater upon engi… ▽ More Experiments, analyses, and simulations have shown that the engine exhaust plume of a Mars lander large enough for human spaceflight will create a deep crater in the martian soil, blowing ejecta to approximately 1 km distance, damaging the bottom of the lander with high-momentum rock impacts, and possibly tilting the lander as the excavated hole collapses to become a broad residual crater upon engine cutoff. Because of this, we deem that we will not have adequate safety margins to land humans on Mars unless we robotically stabilize the soil to form in situ landing pads prior to the mission. It will take a significant amount of time working in a harsh off-planet environment to develop and certify the new technologies and procedures for in situ landing pad construction. The only place to reasonably accomplish this is on the Moon. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Comments: 19 pages, 17 figures

Journal ref: In: 47th AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition. 05 January 2009 - 08 January 2009. Orlando, Florida

Modification of Roberts' Theory for Rocket Exhaust Plumes Eroding Lunar Soil

Authors: Philip T. Metzger, John E. Lane, Christopher D. Immer

Abstract: Roberts' model of lunar soil erosion beneath a landing rocket has been updated in several ways to predict the effects of future lunar landings. The model predicts, among other things, the number of divots that would result on surrounding hardware due to the impact of high velocity particulates, the amount and depth of surface material removed, the volume of ejected soil, its velocity, and the dist… ▽ More Roberts' model of lunar soil erosion beneath a landing rocket has been updated in several ways to predict the effects of future lunar landings. The model predicts, among other things, the number of divots that would result on surrounding hardware due to the impact of high velocity particulates, the amount and depth of surface material removed, the volume of ejected soil, its velocity, and the distance the particles travel on the Moon. The results are compared against measured results from the Apollo program and predictions are made for mitigating the spray around a future lunar outpost. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Comments: 8 pages, 8 figures

Journal ref: In: 11th ASCE Aerospace Division International Conference (Earth and Space 2008), Long Beach, CA, USA, March 3-6, 2008

Cratering of Soil by Im**ing Jets of Gas, with Application to Landing Rockets on Planetary Surfaces

Authors: Philip T. Metzger, Bruce T. Vu, D. E. Taylor, M. J. Kromann, M. Fuchs, B. Yutko, Adam Dokos, Christopher D. Immer, John E. Lane, M. B. Dunkel, Carly M. Donahue, Robert C. Latta III

Abstract: Several physical mechanisms are involved in excavating granular materials beneath a vertical jet of gas. These occur, for example, beneath the exhaust plume of a rocket landing on the soil of the Moon or Mars. A series of experiments and simulations have been performed to provide a detailed view of the complex gas/soil interactions. Measurements have also been taken from the Apollo lunar landing v… ▽ More Several physical mechanisms are involved in excavating granular materials beneath a vertical jet of gas. These occur, for example, beneath the exhaust plume of a rocket landing on the soil of the Moon or Mars. A series of experiments and simulations have been performed to provide a detailed view of the complex gas/soil interactions. Measurements have also been taken from the Apollo lunar landing videos and from photographs of the resulting terrain, and these help to demonstrate how the interactions extrapolate into the lunar environment. It is important to understand these processes at a fundamental level to support the on-going design of higher-fidelity numerical simulations and larger-scale experiments. These are needed to enable future lunar exploration wherein multiple hardware assets will be placed on the Moon within short distances of one another. The high-velocity spray of soil from landing spacecraft must be accurately predicted and controlled lest it erosively damage the surrounding hardware. △ Less

Submitted 12 April, 2021; originally announced April 2021.

Comments: 6 pages, 5 figures

Journal ref: In: 18th Engineering Mechanics Division Conference (EMD2007), Blacksburg, Virginia, USA, June 3-6, 2007

Empirical Scaling Laws of Rocket Exhaust Cratering

Authors: Carly M. Donohue, Philip T. Metzger, Christopher D. Immer

Abstract: When launching or landing a spacecraft on the regolith of a terrestrial surface, special attention needs to be paid to the rocket exhaust cratering effects. If the effects are not controlled, the rocket cratering could damage the spacecraft or other surrounding hardware. The cratering effects of a rocket landing a planet's surface are not understood well, especially for the lunar case with the plu… ▽ More When launching or landing a spacecraft on the regolith of a terrestrial surface, special attention needs to be paid to the rocket exhaust cratering effects. If the effects are not controlled, the rocket cratering could damage the spacecraft or other surrounding hardware. The cratering effects of a rocket landing a planet's surface are not understood well, especially for the lunar case with the plume expanding in vacuum. As a result, the blast effects cannot be estimated sufficiently using analytical theories. It is necessary to develop physics-based simulation tools in order to calculate mission-essential parameters. In this work we test out the scaling laws of the physics in regard to growth rate of the crater depth. This will provide the physical insight necessary to begin the physics-based modeling. △ Less

Submitted 11 April, 2021; originally announced April 2021.

Comments: 3 pages, 3 figures

Journal ref: In: 56th Intemational Astronautical Congress, October 17-21, 2005, Fukuoka, Japan

Understanding and Mitigating Plume Effects During Powered Descents on the Moon and Mars

Authors: Ryan N. Watkins, Philip T. Metzger, Manish Mehta, Daoru Han, Parvathy Prem, Laurent Sibille, Adrienne Dove, Bradley Jolliff, Daniel P. Moriarty III, Donald C. Barker, Ed Patrick, Matthew Kuhns, Michael Laine

Abstract: This 2020 Decadal Survey White Paper reviews what is known about lunar and martian lander Plume Surface Interactions (PSI) during powered descent. This includes an overview of the phenomenology and a description of the induced hardware and environmental impacts. Then it provides an overview of mitigation techniques and a summary of the outstanding questions and strategic knowledge gaps. It finishe… ▽ More This 2020 Decadal Survey White Paper reviews what is known about lunar and martian lander Plume Surface Interactions (PSI) during powered descent. This includes an overview of the phenomenology and a description of the induced hardware and environmental impacts. Then it provides an overview of mitigation techniques and a summary of the outstanding questions and strategic knowledge gaps. It finishes with five recommendations: to include dedicated descent imagers on every surface mission so that PSI can be directly recorded and reviewed by ground teams; as far as possible, to make all data related to PSI effects publicly accessible; to develop methods and instruments for making key measurements of PSI; to assess and record key flight data; and to invest funding into studies of long-term infrastructure architectures and mitigation techniques. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: 8 pages

Magneto-Seebeck microscopy of domain switching in collinear antiferromagnet CuMnAs

Authors: Tomas Janda, Joao Godinho, Tomas Ostatnicky, Emanuel Pfitzner, Georg Ulrich, Arne Hoehl, Sonka Reimers, Zbynek Soban, Thomas Metzger, Helena Reichlova, Vít Novák, Richard Campion, Joachim Heberle, Peter Wadley, Kevin Edmonds, Ollie Amin, Jas Chauhan, Sarnjeet Dhesi, Francesco Maccherozzi, Ruben Otxoa, Pierre Roy, Kamil Olejnik, Petr Němec, Tomas Jungwirth, Bernd Kaestner , et al. (1 additional authors not shown)

Abstract: Antiferromagnets offer spintronic device characteristics unparalleled in ferromagnets owing to their lack of stray fields, THz spin dynamics, and rich materials landscape. Microscopic imaging of aniferromagnetic domains is one of the key prerequisites for understading physical principles of the device operation. However, adapting common magnetometry techniques to the dipolar-field-free antiferroma… ▽ More Antiferromagnets offer spintronic device characteristics unparalleled in ferromagnets owing to their lack of stray fields, THz spin dynamics, and rich materials landscape. Microscopic imaging of aniferromagnetic domains is one of the key prerequisites for understading physical principles of the device operation. However, adapting common magnetometry techniques to the dipolar-field-free antiferromagnets has been a major challenge. Here we demonstrate in a collinear antiferromagnet a thermoelectric detection method by combining the magneto-Seebeck effect with local heat gradients generated by scanning far-field or near-field techniques. In a 20 nm epilayer of uniaxial CuMnAs we observe reversible 180 deg switching of the Néel vector via domain wall displacement, controlled by the polarity of the current pulses. We also image polarity-dependent 90 deg switching of the Néel vector in a thicker biaxial film, and domain shattering induced at higher pulse amplitudes. The antiferromagnetic domain maps obtained by our laboratory technique are compared to measurements by the established synchrotron microscopy using X-ray magnetic linear dichroism. △ Less

Submitted 11 April, 2020; originally announced April 2020.

Journal ref: Phys. Rev. Materials 4, 094413 (2020)

Measuring the Fidelity of Asteroid Regolith and Cobble Simulants

Authors: Philip T. Metzger, Daniel T. Britt, Stephen Covey, Cody Schultz, Kevin M. Cannon, Kevin D. Grossman, James G. Mantovani, Robert P. Mueller

Abstract: NASA has developed a "Figure of Merit" method to grade the fidelity of lunar simulants for scientific and engineering purposes. Here we extend the method to grade asteroid simulants, both regolith and cobble variety, and we apply the method to the newly developed asteroid regolith and cobble simulant UCF/DSI-CI-2. The reference material that is used to evaluate this simulant for most asteroid prop… ▽ More NASA has developed a "Figure of Merit" method to grade the fidelity of lunar simulants for scientific and engineering purposes. Here we extend the method to grade asteroid simulants, both regolith and cobble variety, and we apply the method to the newly developed asteroid regolith and cobble simulant UCF/DSI-CI-2. The reference material that is used to evaluate this simulant for most asteroid properties is the Orgueil meteorite. Those properties are the mineralogical and elemental composition, grain density, bulk density of cobbles, magnetic susceptibility, mechanical strength of cobbles, and volatile release patterns. To evaluate the regolith simulant's particle sizing we use a reference model that was based upon the sample returned from Itokawa by Hayabusa, the boulder count on Hayabusa, and four cases of disrupted asteroids that indicate particle sizing of the subsurface material. Compared to these references, the simulant has high figures of merit, indicating it is a good choice for a wide range of scientific and engineering applications. We recommend this methodology to the wider asteroid community and in the near future will apply it to additional asteroid simulants currently under development. △ Less

Submitted 23 December, 2019; originally announced December 2019.

Comments: 42 pages, 11 figures

Journal ref: Icarus 321, 15 March 2019, 632-646

Model for Asteroid Regolith to Guide Simulant Development

Authors: Philip T. Metzger, Daniel T. Britt

Abstract: When creating asteroid regolith simulant, it is necessary to have a model of asteroid regolith to guide and to evaluate the simulant. We created a model through evaluation and synthesis of the available data sets including (1) the returned sample from Itokawa by the Hayabusa spacecraft, (2) imagery from the Hayabusa and NEAR spacecraft visiting Itokawa and Eros, respectively, (3) thermal infrared… ▽ More When creating asteroid regolith simulant, it is necessary to have a model of asteroid regolith to guide and to evaluate the simulant. We created a model through evaluation and synthesis of the available data sets including (1) the returned sample from Itokawa by the Hayabusa spacecraft, (2) imagery from the Hayabusa and NEAR spacecraft visiting Itokawa and Eros, respectively, (3) thermal infrared observations from asteroids, (4) the texture of meteorite regolith breccias, and (5) observations and modeling of the ejecta clouds from disrupted asteroids. Comparison of the Hayabusa returned sample with other data sets suggest the surficial material in the smooth regions of asteroids is dissimilar to the bulk regolith, probably due to removal of fines by photoionization and solar wind interaction or by preferential migration of mid-sized particles into the smooth terrain. We found deep challenges interpreting and applying the thermal infrared data so we were unable to use those observations in the model. Texture of regolith breccias do not agree with other data sets, suggesting the source regolith on Vesta was coarser than typical asteroid regolith. The observations of disrupted asteroids present a coherent picture of asteroid bulk regolith in collisional equilibrium, unlike lunar regolith, HED textures, and the Itokawa returned sample. The model we adopt consists of power laws for the bulk regolith in unspecified terrain (differential power index -3.5, representing equilibrium), and the surficial regolith in smooth terrain (differential power index -2.5, representing disequilibrium). Available data do not provide adequate constraints on maximum and minimum particle sizes for these power laws, so the model treats them as user-selectable parameters for the simulant. △ Less

Submitted 25 December, 2019; v1 submitted 22 December, 2019; originally announced December 2019.

Comments: 15 pages, 4 figures

HV discharges triggered by dual- and triple-frequency laser filaments

Authors: Thomas Produit, Pierre Walch, Guillaume Schimmel, Benoît Mahieu, Clemens Herkommer, Robert Jung, Thomas Metzger, Knut Michel, Yves-Bernard André, André Mysyrowicz, Aurélien Houard, Jérôme Kasparian, Jean-Pierre Wolf

Abstract: We study the use of frequency upconversion schemes of near-IR picosecond laser pulses and compare their ability to guide and trigger electric discharges through filamentation in air. Upconversion, such as Second Harmonic Generation, is favorable for triggering electric discharges for given amount of available laser energy, even taking into account the losses inherent to frequency conversion. We fo… ▽ More We study the use of frequency upconversion schemes of near-IR picosecond laser pulses and compare their ability to guide and trigger electric discharges through filamentation in air. Upconversion, such as Second Harmonic Generation, is favorable for triggering electric discharges for given amount of available laser energy, even taking into account the losses inherent to frequency conversion. We focus on the practical question of optimizing the use of energy from a given available laser system and the potential advantage to use frequency conversion schemes. △ Less

Submitted 11 April, 2019; originally announced April 2019.

Journal ref: Optics Express Vol. 27, Issue 8, pp. 11339-11347 (2019)

Detection of latent heteroscedasticity and group-based regression effects in linear models via Bayesian model selection

Authors: Thomas A. Metzger, Christopher T. Franck

Abstract: Standard linear modeling approaches make potentially simplistic assumptions regarding the structure of categorical effects that may obfuscate more complex relationships governing data. For example, recent work focused on the two-way unreplicated layout has shown that hidden grou**s among the levels of one categorical predictor frequently interact with the ungrouped factor. We extend the notion o… ▽ More Standard linear modeling approaches make potentially simplistic assumptions regarding the structure of categorical effects that may obfuscate more complex relationships governing data. For example, recent work focused on the two-way unreplicated layout has shown that hidden grou**s among the levels of one categorical predictor frequently interact with the ungrouped factor. We extend the notion of a "latent grou** factor" to linear models in general. The proposed work allows researchers to determine whether an apparent grou** of the levels of a categorical predictor reveals a plausible hidden structure given the observed data. Specifically, we offer Bayesian model selection-based approaches to reveal latent group-based heteroscedasticity, regression effects, and/or interactions. Failure to account for such structures can produce misleading conclusions. Since the presence of latent group structures is frequently unknown a priori to the researcher, we use fractional Bayes factor methods and mixture $g$-priors to overcome lack of prior information. △ Less

Submitted 3 March, 2019; originally announced March 2019.

The Reclassification of Asteroids from Planets to Non-Planets

Authors: Philip T. Metzger, Mark V. Sykes, Alan Stern, Kirby Runyon

Abstract: It is often claimed that asteroids' sharing of orbits is the reason they were re-classified from planets to non-planets. A critical review of the literature from the 19th Century to the present shows this is factually incorrect. The literature shows the term asteroid was broadly recognized as a subset of planet for 150 years. On-going discovery of asteroids resulted in a de facto stretching of the… ▽ More It is often claimed that asteroids' sharing of orbits is the reason they were re-classified from planets to non-planets. A critical review of the literature from the 19th Century to the present shows this is factually incorrect. The literature shows the term asteroid was broadly recognized as a subset of planet for 150 years. On-going discovery of asteroids resulted in a de facto stretching of the concept of planet to include the ever-smaller bodies. Scientists found utility in this taxonomic identification as it provided categories needed to argue for the leading hypothesis of planet formation, Laplace's nebular hypothesis. In the 1950s, developments in planet formation theory found it no longer useful to maintain taxonomic identification between asteroids and planets, Ceres being the primary exception. At approximately the same time, there was a flood of publications on the geophysical nature of asteroids showing them to be geophysically different than the large planets. This is when the terminology in asteroid publications calling them planets abruptly plunged from a high level of usage where it had hovered during the period 1801 - 1957 to a low level that held constant thereafter. This marks the point where the community effectively formed consensus that asteroids should be taxonomically distinct from planets. The evidence demonstrates this consensus formed on the basis of geophysical differences between asteroids and planets, not the sharing of orbits. We suggest attempts to build consensus around planetary taxonomy not rely on the non-scientific process of voting, but rather through precedent set in scientific literature and discourse, by which perspectives evolve with additional observations and information, just as they did in the case of asteroids. △ Less

Submitted 7 September, 2018; v1 submitted 10 May, 2018; originally announced May 2018.

Comments: 31 pages, 5 figures

Experiments Indicate Regolith is Looser in the Lunar Polar Regions than at the Lunar Landing Sites

Authors: Philip T. Metzger, Seamus Anderson, Anthony Colaprete

Abstract: Since the Apollo program or earlier it has been widely believed that the lunar regolith was compacted through vibrations including nearby impact events, thermal stress release in the regolith, deep moon quakes, and shallow moon quakes. Experiments have shown that vibrations both compact and re-loosen regolith as a function of depth in the lunar soil column and amplitude of the vibrational accelera… ▽ More Since the Apollo program or earlier it has been widely believed that the lunar regolith was compacted through vibrations including nearby impact events, thermal stress release in the regolith, deep moon quakes, and shallow moon quakes. Experiments have shown that vibrations both compact and re-loosen regolith as a function of depth in the lunar soil column and amplitude of the vibrational acceleration. Experiments have also identified another process that is extremely effective at compacting regolith: the expansion and contraction of individual regolith grains due to thermal cycling in the upper part of the regolith where the diurnal thermal wave exists. Remote sensing data sets from the Moon suggest that the soil is less compacted in regions where there is less thermal cycling, including infrared emissions measured by the Diviner radiometer on the Lunar Reconnaissance Orbiter (LRO). Here, we performed additional experiments in thermal cycling simulated lunar regolith and confirm that it is an effective compaction mechanism and may explain the remote sensing data. This creates a consistent picture that the soil really is looser in the upper layers in polar regions, which may be a challenge for rovers that must drive in the looser soil. △ Less

Submitted 17 January, 2018; originally announced January 2018.

Comments: 9 pages. Earth & Space 2018 Conference (ASCE)

High repetition rate ultrashort laser cuts a path through fog

Authors: Lorena de la Cruz, Elise Schubert, Denis Mongin, Sandro Klingebiel, Marcel Schultze, Thomas Metzger, Knut Michel, Jérôme Kasparian, Jean-Pierre Wolf

Abstract: We experimentally demonstrate that the transmission of a 1030~nm, 1.3~ps laser beam of 100 mJ energy through fog increases when its repetition rate increases to the kHz range. Due to the efficient energy deposition by the laser filaments in the air, a shockwave ejects the fog droplets from a substantial volume of the beam, at a moderate energy cost. This process opens prospects for applications re… ▽ More We experimentally demonstrate that the transmission of a 1030~nm, 1.3~ps laser beam of 100 mJ energy through fog increases when its repetition rate increases to the kHz range. Due to the efficient energy deposition by the laser filaments in the air, a shockwave ejects the fog droplets from a substantial volume of the beam, at a moderate energy cost. This process opens prospects for applications requiring the transmission of laser beams through fogs and clouds. △ Less

Submitted 25 December, 2016; originally announced December 2016.

Comments: 11 pages, 5 figures

Journal ref: Applied Physics Letters 109, 251105 (2016)

Affordable, Rapid Bootstrap** of the Space Industry and Solar System Civilization

Authors: Philip T. Metzger, Anthony Muscatello, Robert P. Mueller, James Mantovani

Abstract: Advances in robotics and additive manufacturing have become game-changing for the prospects of space industry. It has become feasible to bootstrap a self-sustaining, self-expanding industry at reasonably low cost. Simple modeling was developed to identify the main parameters of successful bootstrap**. This indicates that bootstrap** can be achieved with as little as 12 metric tons (MT) landed… ▽ More Advances in robotics and additive manufacturing have become game-changing for the prospects of space industry. It has become feasible to bootstrap a self-sustaining, self-expanding industry at reasonably low cost. Simple modeling was developed to identify the main parameters of successful bootstrap**. This indicates that bootstrap** can be achieved with as little as 12 metric tons (MT) landed on the Moon during a period of about 20 years. The equipment will be teleoperated and then transitioned to full autonomy so the industry can spread to the asteroid belt and beyond. The strategy begins with a sub-replicating system and evolves it toward full self-sustainability (full closure) via an in situ technology spiral. The industry grows exponentially due to the free real estate, energy, and material resources of space. The mass of industrial assets at the end of bootstrap** will be 156 MT with 60 humanoid robots, or as high as 40,000 MT with as many as 100,000 humanoid robots if faster manufacturing is supported by launching a total of 41 MT to the Moon. Within another few decades with no further investment, it can have millions of times the industrial capacity of the United States. Modeling over wide parameter ranges indicates this is reasonable, but further analysis is needed. This industry promises to revolutionize the human condition. △ Less

Submitted 9 December, 2016; originally announced December 2016.

Comments: 24 pages, 14 figures

Journal ref: Journal of Aerospace Engineering 26.2, 18-29 (2013)

Dual-scale turbulence in filamenting laser beams at high average power

Authors: Elise Schubert, Lorena de la Cruz, Denis Mongin, Jérôme Kasparian, Jean-Pierre Wolf, Sandro Klingebiel, Marcel Schultze, Thomas Metzger, Knut Michel

Abstract: We investigate the self-induced turbulence of high repetition rate laser filaments over a wide range of average powers (1 mW to 100 W) and its sensitivity to external atmospheric turbulence. Although both externally-imposed and self-generated turbulences can have comparable magnitudes, they act on different temporal and spatial scales. While the former drives the shot-to-shot motion at the millise… ▽ More We investigate the self-induced turbulence of high repetition rate laser filaments over a wide range of average powers (1 mW to 100 W) and its sensitivity to external atmospheric turbulence. Although both externally-imposed and self-generated turbulences can have comparable magnitudes, they act on different temporal and spatial scales. While the former drives the shot-to-shot motion at the millisecond time scale, the latter acts on the 0.5 s scale. As a consequence, their effects are decoupled, preventing beam stabilization by the thermally-induced low-density channel produced by the laser filaments. △ Less

Submitted 11 October, 2016; originally announced October 2016.

Comments: 11 pages, 5 figures

Journal ref: Physical Review A 94, 043808 (2016)

Estimation of Apollo lunar dust transport using optical extinction measurements

Authors: John E. Lane, Philip T. Metzger

Abstract: A technique to estimate mass erosion rate of surface soil during landing of the Apollo Lunar Module (LM) and total mass ejected due to the rocket plume interaction is proposed and tested. The erosion rate is proportional to the product of the second moment of the lofted particle size distribution N(D), and third moment of the normalized soil size distribution S(D), divided by the integral of S(D)D… ▽ More A technique to estimate mass erosion rate of surface soil during landing of the Apollo Lunar Module (LM) and total mass ejected due to the rocket plume interaction is proposed and tested. The erosion rate is proportional to the product of the second moment of the lofted particle size distribution N(D), and third moment of the normalized soil size distribution S(D), divided by the integral of S(D)D^2/v(D), where D is particle diameter and v(D) is the vertical component of particle velocity. The second moment of N(D) is estimated by optical extinction analysis of the Apollo cockpit video. Because of the similarity between mass erosion rate of soil as measured by optical extinction and rainfall rate as measured by radar reflectivity, traditional NWS radar/rainfall correlation methodology can be applied to the lunar soil case where various S(D) models are assumed corresponding to specific lunar sites. △ Less

Submitted 28 February, 2015; originally announced March 2015.

Comments: Acta Geophysica 2015

Analysis of strain and stacking faults in single nanowires using Bragg coherent diffraction imaging

Authors: V. Favre-Nicolin, F. Mastropietro, J. Eymery, D. Camacho, Y. M. Niquet, B. M. Borg, M. E. Messing, L. -E. Wernersson, R. E. Algra, E. P. A. M. Bakkers, T. H. Metzger, R Harder, I. K. Robinson

Abstract: Coherent diffraction imaging (CDI) on Bragg reflections is a promising technique for the study of three-dimensional (3D) composition and strain fields in nanostructures, which can be recovered directly from the coherent diffraction data recorded on single objects. In this article we report results obtained for single homogeneous and heterogeneous nanowires with a diameter smaller than 100 nm, fo… ▽ More Coherent diffraction imaging (CDI) on Bragg reflections is a promising technique for the study of three-dimensional (3D) composition and strain fields in nanostructures, which can be recovered directly from the coherent diffraction data recorded on single objects. In this article we report results obtained for single homogeneous and heterogeneous nanowires with a diameter smaller than 100 nm, for which we used CDI to retrieve information about deformation and faults existing in these wires. The article also discusses the influence of stacking faults, which can create artefacts during the reconstruction of the nanowire shape and deformation. △ Less

Submitted 21 January, 2010; v1 submitted 28 October, 2009; originally announced October 2009.

Comments: 18 pages, 6 figures Submitted to New Journal of Physics

Journal ref: New Journal of Physics 12 (2010) 035013

Photogrammetry and ballistic analysis of a high-flying projectile in the STS-124 space shuttle launch

Authors: Philip T. Metzger, John E. Lane, Robert A. Carilli, Jason M. Long, Kathy L. Shawn

Abstract: A method combining photogrammetry with ballistic analysis is demonstrated to identify flying debris in a rocket launch environment. Debris traveling near the STS-124 Space Shuttle was captured on cameras viewing the launch pad within the first few seconds after launch. One particular piece of debris caught the attention of investigators studying the release of flame trench fire bricks because it… ▽ More A method combining photogrammetry with ballistic analysis is demonstrated to identify flying debris in a rocket launch environment. Debris traveling near the STS-124 Space Shuttle was captured on cameras viewing the launch pad within the first few seconds after launch. One particular piece of debris caught the attention of investigators studying the release of flame trench fire bricks because its high trajectory could indicate a flight risk to the Space Shuttle. Digitized images from two pad perimeter high-speed 16-mm film cameras were processed using photogrammetry software based on a multi-parameter optimization technique. Reference points in the image were found from 3D CAD models of the launch pad and from surveyed points on the pad. The three-dimensional reference points were matched to the equivalent two-dimensional camera projections by optimizing the camera model parameters using a gradient search optimization technique. Using this method of solving the triangulation problem, the xyz position of the object's path relative to the reference point coordinate system was found for every set of synchronized images. This trajectory was then compared to a predicted trajectory while performing regression analysis on the ballistic coefficient and other parameters. This identified, with a high degree of confidence, the object's material density and thus its probable origin within the launch pad environment. Future extensions of this methodology may make it possible to diagnose the underlying causes of debris-releasing events in near-real time, thus improving flight safety. △ Less

Submitted 22 October, 2009; originally announced October 2009.

Comments: 26 pages, 11 figures, 3 tables

Journal ref: Acta Astronautica 67(1), 217-229 (2010)

Hyperstaticity and loops in frictional granular packings

Authors: Antoinette Tordesillas, Edward Lam, Philip T. Metzger

Abstract: The hyperstatic nature of granular packings of perfectly rigid disks is analyzed algebraically and through numerical simulation. The elementary loops of grains emerge as a fundamental element in addressing hyperstaticity. Loops consisting of an odd number of grains behave differently than those with an even number. For odd loops, the latent stresses are exterior and are characterized by the sum… ▽ More The hyperstatic nature of granular packings of perfectly rigid disks is analyzed algebraically and through numerical simulation. The elementary loops of grains emerge as a fundamental element in addressing hyperstaticity. Loops consisting of an odd number of grains behave differently than those with an even number. For odd loops, the latent stresses are exterior and are characterized by the sum of frictional forces around each loop. For even loops, the latent stresses are interior and are characterized by the alternating sum of frictional forces around each loop. The statistics of these two types of loop sums are found to be Gibbsian with a "temperature" that is linear with the friction coefficient mu when mu<1. △ Less

Submitted 9 June, 2009; originally announced June 2009.

Comments: 4 pages; Powders and Grains 2009, Golden, Colorado, USA

Electric Potential Due to a System of Conducting Spheres

Authors: Philip T. Metzger, John E. Lane

Abstract: Equations describing the complete series of image charges for a system of conducting spheres are presented. The method of image charges, originally described by J. C. Maxwell in 1873, has been and continues to be a useful method for solving many three dimensional electrostatic problems. Here we demonstrate that as expected when the series is truncated to any finite order N, the electric field re… ▽ More Equations describing the complete series of image charges for a system of conducting spheres are presented. The method of image charges, originally described by J. C. Maxwell in 1873, has been and continues to be a useful method for solving many three dimensional electrostatic problems. Here we demonstrate that as expected when the series is truncated to any finite order N, the electric field resulting from the truncated series becomes qualitatively more similar to the correct field as N increases. A method of charge normalization is developed which provides significant improvement for truncated low order solutions. The formulation of the normalization technique and its solution via a matrix inversion has similarities to the method of moments, which is a numerical solution of Poisson's equation, using an integral equation for the unknown charge density with a known boundary potential. The last section of this paper presents a gradient search method to optimize a set of L point charges for M spheres. This method may use the image charge series to initialize the gradient search. We demonstrate quantitatively how the metric can be optimized by adjusting the locations and amounts of charge for the set of points, and that an optimized set of charges generally performs better than truncated normalized image charges, at the expense of gradient search iteration time. △ Less

Submitted 8 June, 2009; originally announced June 2009.

Comments: 25 pages, 9 figures. To appear in The Open Applied Physics Journal, http://www.bentham.org/open/toapj/

Journal ref: The Open Applied Physics Journal 2, 32-48 (2009)

Spatial and Temporal Extrapolation of Disdrometer Size Distributions Based on a Lagrangian Trajectory Model of Falling Rain

Authors: John E. Lane, Takis Kasparis, Philip T. Metzger, W. Linwood Jones

Abstract: Methodologies to improve disdrometer processing, loosely based on mathematical techniques common to the field of particle flow and fluid mechanics, are examined and tested. The inclusion of advection and vertical wind field estimates appears to produce significantly improved results in a Lagrangian hydrometeor trajectory model, in spite of very strict assumptions of noninteracting hydrometeors,… ▽ More Methodologies to improve disdrometer processing, loosely based on mathematical techniques common to the field of particle flow and fluid mechanics, are examined and tested. The inclusion of advection and vertical wind field estimates appears to produce significantly improved results in a Lagrangian hydrometeor trajectory model, in spite of very strict assumptions of noninteracting hydrometeors, constant vertical air velocity, and time independent advection during a radar scan time interval. Wind field data can be extracted from each radar elevation scan by plotting and analyzing reflectivity contours over the disdrometer site and by collecting the radar radial velocity data to obtain estimates of advection. Specific regions of disdrometer spectra (drop size versus time) often exhibit strong gravitational sorting signatures, from which estimates of vertical velocity can be extracted. These independent wind field estimates can be used as initial conditions to the Lagrangian trajectory simulation of falling hydrometeors. △ Less

Submitted 8 June, 2009; originally announced June 2009.

Comments: 25 pages, 15 figures, 4 tables. Submitted to The Open Atmospheric Science Journal, http://www.bentham.org/open/toascj/

Journal ref: The Open Atmospheric Science Journal 3, 172-186 (2009)

Jet-induced cratering of a granular surface with application to lunar spaceports

Authors: Philip T. Metzger, Christopher D. Immer, Carly M. Donahue, Bruce M. Vu, Robert C. Latta III, Matthew Deyo-Svendsen

Abstract: The erosion of lunar soil by rocket exhaust plumes is investigated experimentally. This has identified the diffusion-driven flow in the bulk of the sand as an important but previously unrecognized mechanism for erosion dynamics. It has also shown that slow regime cratering is governed by the recirculation of sand in the widening geometry of the crater. Scaling relationships and erosion mechanism… ▽ More The erosion of lunar soil by rocket exhaust plumes is investigated experimentally. This has identified the diffusion-driven flow in the bulk of the sand as an important but previously unrecognized mechanism for erosion dynamics. It has also shown that slow regime cratering is governed by the recirculation of sand in the widening geometry of the crater. Scaling relationships and erosion mechanisms have been characterized in detail for the slow regime. The diffusion-driven flow occurs in both slow and fast regime cratering. Because diffusion-driven flow had been omitted from the lunar erosion theory and from the pressure cratering theory of the Apollo and Viking era, those theories cannot be entirely correct. △ Less

Submitted 1 June, 2009; originally announced June 2009.

Comments: 13 pages, link to published version: http://cedb.asce.org/cgi/WWWdisplay.cgi?0900004

Journal ref: J. Aerospace Engineering Vol. 21, No. 1, January 2009, pp. 24-32,

Craters Formed in Granular Beds by Im**ing Jets of Gas

Authors: Philip T. Metzger, Robert C. Latta III, Jason M. Schuler, Christopher D. Immer

Abstract: When a jet of gas im**es vertically on a granular bed and forms a crater, the grains may be moved by several different mechanisms: viscous erosion, diffused gas eruption, bearing capacity failure, and/or diffusion-driven shearing. The relative importance of these mechanisms depends upon the flow regime of the gas, the mechanical state of the granular material, and other physical parameters. He… ▽ More When a jet of gas im**es vertically on a granular bed and forms a crater, the grains may be moved by several different mechanisms: viscous erosion, diffused gas eruption, bearing capacity failure, and/or diffusion-driven shearing. The relative importance of these mechanisms depends upon the flow regime of the gas, the mechanical state of the granular material, and other physical parameters. Here we report research in two specific regimes: viscous erosion forming scour holes as a function of particle size and gravity; and bearing capacity failure forming deep transient craters as a function of soil compaction. △ Less

Submitted 29 May, 2009; originally announced May 2009.

Comments: 4 pages; Powders and Grains 2009, Golden, Colorado, USA

Journal ref: Powders and Grains 2009, Proc. 6th Int Conf Micromech Granul Media 1145(1), 767-770

Structural and magnetic properties of an InGaAs/Fe$_3$Si superlattice in cylindrical geometry

Authors: Ch. Deneke, J. Schumann, R. Engelhard, J. Thomas, C. Müller, M. S. Khatri, A. Malachias, M. Weisser, T. H. Metzger, O. G. Schmidt

Abstract: The structure and the magnetic properties of an InGaAs/Fe3Si superlattice in a cylindrical geometry are investigated by electron microscopy techniques, x-ray diffraction and magnetometry. To form a radial superlattice, a pseudomorphic InGaAs/Fe3As bilayer has been released from its substrate self-forming into a rolled-up microtube. Oxide-free interfaces as well as areas of crystalline bonding ar… ▽ More The structure and the magnetic properties of an InGaAs/Fe3Si superlattice in a cylindrical geometry are investigated by electron microscopy techniques, x-ray diffraction and magnetometry. To form a radial superlattice, a pseudomorphic InGaAs/Fe3As bilayer has been released from its substrate self-forming into a rolled-up microtube. Oxide-free interfaces as well as areas of crystalline bonding are observed and an overall lattice mismatch between succeeding layers is determined. The cylindrical symmetry of the final radial superlattice shows a significant effect on the magnetization behavior of the rolled-up layers. △ Less

Submitted 10 February, 2009; v1 submitted 5 October, 2008; originally announced October 2008.

Journal ref: Nanotechnology 20, 045703 (2009)

Direct strain and elastic energy evaluation in rolled-up semiconductor tubes by x-ray micro-diffraction

Authors: A. Malachias, Ch. Deneke, B. Krause, C. Mocuta, S. Kiravittaya, T. H. Metzger, O. G. Schmidt

Abstract: We depict the use of x-ray diffraction as a tool to directly probe the strain status in rolled-up semiconductor tubes. By employing continuum elasticity theory and a simple model we are able to simulate quantitatively the strain relaxation in perfect crystalline III-V semiconductor bi- and multilayers as well as in rolled-up layers with dislocations. The reduction in the local elastic energy is… ▽ More We depict the use of x-ray diffraction as a tool to directly probe the strain status in rolled-up semiconductor tubes. By employing continuum elasticity theory and a simple model we are able to simulate quantitatively the strain relaxation in perfect crystalline III-V semiconductor bi- and multilayers as well as in rolled-up layers with dislocations. The reduction in the local elastic energy is evaluated for each case. Limitations of the technique and theoretical model are discussed in detail. △ Less

Submitted 7 September, 2008; originally announced September 2008.

Comments: 32 pages (single column), 9 figures, 39 references

X-ray pushing of a mechanical microswing

Authors: A. Siria, M. S. Rodrigues, O. Dhez, W. Schwartz, G. Torricelli, S. Le Denmat, N. Rochat, G. Auvert, O. Bikondoa, T. H. Metzger, D. Wermeille, R. Felici, F. Comin, J. Chevrier

Abstract: Nanoelectromechanical Systems (NEMS) are among the best candidates to measure interactions at nanoscale [1-6], especially when resonating oscillators are used with high quality factor [7, 8]. Despite many efforts [9, 10], efficient and easy actuation in NEMS remains an issue [11]. The mechanism that we propose, thermally mediated Center Of Mass (COM) displacements, represents a new actuation sch… ▽ More Nanoelectromechanical Systems (NEMS) are among the best candidates to measure interactions at nanoscale [1-6], especially when resonating oscillators are used with high quality factor [7, 8]. Despite many efforts [9, 10], efficient and easy actuation in NEMS remains an issue [11]. The mechanism that we propose, thermally mediated Center Of Mass (COM) displacements, represents a new actuation scheme for NEMS and MEMS. To demonstrate this scheme efficiency we show how mechanical nanodis- placements of a MEMS is triggered using modulated X-ray microbeams. The MEMS is a microswing constituted by a Ge microcrystal attached to a Si microcantilever. The interaction is mediated by the Ge absorption of the intensity modulated X-ray microbeam im**ing on the microcrystal. The small but finite thermal expansion of the Ge microcrystal is large enough to force a nanodisplacement of the Ge microcrystal COM glued on a Si microlever. The inverse mechanism can be envisaged: MEMS can be used to shape X-ray beams. A Si microlever can be a high frequency X-ray beam chopper for time studies in biology and chemistry. △ Less

Submitted 22 January, 2008; v1 submitted 14 January, 2008; originally announced January 2008.

Comments: 5 pages, 4 figure

H theorem for contact forces in granular materials

Authors: Philip T. Metzger

Abstract: A maximum entropy theorem is developed and tested for granular contact forces. Although it is idealized, describing two dimensional packings of round, rigid, frictionless, cohesionless disks with coordination number Z=4, it appears to describe a central part of the physics present in the more general cases. The theorem does not make the strong claims of Edwards' hypothesis, nor does it rely upon… ▽ More A maximum entropy theorem is developed and tested for granular contact forces. Although it is idealized, describing two dimensional packings of round, rigid, frictionless, cohesionless disks with coordination number Z=4, it appears to describe a central part of the physics present in the more general cases. The theorem does not make the strong claims of Edwards' hypothesis, nor does it rely upon Edwards' hypothesis at any point. Instead, it begins solely from the physical assumption that closed loops of grains are unable to impose strong force correlations around the loop. This statement is shown to be a generalization of Boltzmann's Assumption of Molecular Chaos (his \textit{stosszahlansatz}), allowing for the extra symmetries of granular stress propagation compared to the more limited symmetries of momentum propagation in a thermodynamic system. The theorem that follows from this is similar to Boltzmann's $H$ theorem and is presented as an alternative to Edwards' hypothesis for explaining some granular phenomena. It identifies a very interesting feature of granular packings: if the generalized \textit{stosszahlansatz} is correct, then the bulk of homogeneous granular packings must satisfy a maximum entropy condition simply by virtue of being stable, without any exploration of phase space required. This leads to an independent derivation of the contact force statistics, and these predictions have been compared to numerical simulation data in the isotropic case. The good agreement implies that the generalized \textit{stosszahlansatz} is indeed accurate at least for the isotropic state of the idealized case studied here, and that it is the reductionist explanation for contact force statistics in this case. △ Less

Submitted 11 December, 2007; v1 submitted 12 June, 2006; originally announced June 2006.

Comments: 15 pages, 8 figures, to appear in Phys. Rev. E

Journal ref: Phys. Rev. E 77, 011307 (2008)

Pseudoepitaxial transrotational structures in 14 nm-thick NiSi layers on [001] silicon

Authors: Alessandra Alberti, Corrado Bongiorno, Brunella Cafra, Giovanni Mannino, Emanuele Rimini, Till Metzger, Cristian Mocuta, Thorsten Kammler, Thomas Feudel

Abstract: In a system consisting of two different lattices, the structural stability is ensured when an epitaxial relationship occurs between them and allows the system to retain the stress, avoiding the formation of a polycristalline film. The phenomenon occurs if the film thickness does not exceed a critical value. Here we show that, in spite of its orthorombic structure, a 14nm-thick NiSi layer can thr… ▽ More In a system consisting of two different lattices, the structural stability is ensured when an epitaxial relationship occurs between them and allows the system to retain the stress, avoiding the formation of a polycristalline film. The phenomenon occurs if the film thickness does not exceed a critical value. Here we show that, in spite of its orthorombic structure, a 14nm-thick NiSi layer can three-dimensionally (3D) adapt to the cubic Si lattice by forming transrotational domains. Each domain arises by the continuous bending of the NiSi lattice, maintaining a close relationship with the substrate structure. The presence of transrotational domains does not cause a roughening of the layer but instead it improves the structural and electrical stability of the silicide in comparison with a 24nm-thick layer formed using the same annealing process. These results have relevant implications on thickness scaling of NiSi layers currently used as metallizations of electronic devices. △ Less

Submitted 25 October, 2005; originally announced October 2005.

Comments: 18 pages with 5 colour figures

Journal ref: Acta Crystallographica B, 61, 486-491 (2005)

Elegance of disordered granular packings: a validation of Edwards' hypothesis

Authors: Philip T. Metzger, Carly M. Donahue

Abstract: We have found a way to analyze Edwards' density of states for static granular packings in the special case of round, rigid, frictionless grains assuming constant coordination number. It obtains the most entropic density of single grain states, which predicts several observables including the distribution of contact forces. We compare these results against empirical data obtained in dynamic simul… ▽ More We have found a way to analyze Edwards' density of states for static granular packings in the special case of round, rigid, frictionless grains assuming constant coordination number. It obtains the most entropic density of single grain states, which predicts several observables including the distribution of contact forces. We compare these results against empirical data obtained in dynamic simulations of granular packings. The agreement is quite good, hel** validate the use of statistical mechanics methods in granular physics. The differences between theory and empirics are mainly related to the coordination number, and when the empirical data are sorted by that number we obtain several insights that suggest an underlying elegance in the density of states. △ Less

Submitted 14 April, 2005; v1 submitted 16 March, 2005; originally announced March 2005.

Comments: 4 pages, 5 figures, Changes in the references

Journal ref: Phys. Rev. Lett. 94, 148001 (2005)

Atomic ordering in self-assembled Ge:Si(001) islands observed by X-ray scattering

Authors: A. Malachias, T. U. Schulli, G. Medeiros-Ribeiro, M. Stoffel, O. G. Schmidt, T. H. Metzger, R. Magalhaes-Paniago

Abstract: X-ray diffuse scattering in the vicinity of a basis-forbidden (200) Bragg reflection was measured for a sample with uncapped self-assembled Ge islands epitaxially grown on Si(001). Our results provide evidence of atomically ordered SiGe domains in both islands and wetting layer. The modeling of x-ray profiles reveals the presence of antiphase boundaries separating the ordered domains in a limite… ▽ More X-ray diffuse scattering in the vicinity of a basis-forbidden (200) Bragg reflection was measured for a sample with uncapped self-assembled Ge islands epitaxially grown on Si(001). Our results provide evidence of atomically ordered SiGe domains in both islands and wetting layer. The modeling of x-ray profiles reveals the presence of antiphase boundaries separating the ordered domains in a limited region of the islands where the stoichiometry is close to Si0.5Ge0.5. △ Less

Submitted 25 November, 2004; originally announced November 2004.

Comments: 13 pages, 4 figures