-
Beyond 1 ms Charge-Carrier Recombination Dynamics in the CsPbBr3 Perovskite
Authors:
A. Bojtor,
D. Krisztián,
F. Korsós,
S. Kollarics,
T. Pinel,
M. Kollár,
E. Horváth,
X. Mettan,
B. G. Márkus,
L. Forró,
F. Simon
Abstract:
Knowledge of the charge-carrier recombination lifetime, tau, is crucial for the various applications of photovoltaic perovskites. We studied the novel inorganic perovskite, CsPbBr3 and we observe recombination dynamics beyond 1 ms below 200 K and tau approaching 100 us at room temperature. Time-resolved microwave-detected photoconductivity decay (TRMCD), used in combination with injection dependen…
▽ More
Knowledge of the charge-carrier recombination lifetime, tau, is crucial for the various applications of photovoltaic perovskites. We studied the novel inorganic perovskite, CsPbBr3 and we observe recombination dynamics beyond 1 ms below 200 K and tau approaching 100 us at room temperature. Time-resolved microwave-detected photoconductivity decay (TRMCD), used in combination with injection dependence, evidence that tau is dominated by impurity charge trap**. The observed injection dependence is well corroborated by modeling of the trap mechanism. The ultra-long decay time is also consistent with photoconductivity measurements with a continuous-wave excitation at powers corresponding to around one Sun irradiation. While in principle charge-carrier trap** may limit the photovoltaic efficiency in single-cell photovoltaic devices, it could also lead to enhanced efficiency in tandem cells as well as for alternative applications including photodetection and quantum information storage.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Light-Emitting Electrochemical Cells of Single Crystal Hybrid Halide Perovskite with Vertically Aligned Carbon Nanotubes Contacts
Authors:
Pavao Andričević,
Xavier Mettan,
Márton Kollár,
Bálint Náfrádi,
Andrzej Sienkiewicz,
Tonko Garma,
Lidia Rossi,
László Forró,
Endre Horváth
Abstract:
Based on the reported ion migration under electric field in hybrid lead halide perovskites we have developed a bright, light emitting electrochemical cell with CH3NH3PbBr3 single crystals directly grown on vertically aligned carbon nanotube (VACNT) forests as contact electrodes. Under the applied electric field, charged ions in the crystal drift and accumulate in the vicinity of the electrodes, re…
▽ More
Based on the reported ion migration under electric field in hybrid lead halide perovskites we have developed a bright, light emitting electrochemical cell with CH3NH3PbBr3 single crystals directly grown on vertically aligned carbon nanotube (VACNT) forests as contact electrodes. Under the applied electric field, charged ions in the crystal drift and accumulate in the vicinity of the electrodes, resulting in an in operando formed p-i-n heterojunction. The decreased interface energy barrier and the strong charge injection due to the CNT tip enhanced electric field, result in a bright green light emission up to 1800 cd/m2 at room temperature (average = 60 cd/m2). Beyond the light emission, this original device architecture points to the possibility of implementing vertically aligned CNTs as electrodes in operationally-stable perovskite-based optoelectronic devices.
△ Less
Submitted 1 May, 2021;
originally announced May 2021.
-
Three-dimensionally Enlarged Photoelectrodes by a Protogenetic Inclusion of Vertically Aligned Carbon Nanotubes into CH3NH3PbBr3 Single Crystals
Authors:
Pavao Andričević,
Márton Kollár,
Xavier Mettan,
Bálint Náfrádi,
Andrzej Sienkiewicz,
Dóra Fejes,
Klára Hernádi,
László Forró,
Endre Horváth
Abstract:
We demonstrate that single crystals of methylammonium lead bromide (MAPbBr3) could be grown directly on vertically aligned carbon nanotube (VACNT) forests. The fast-growing MAPbBr3 single crystals engulfed the protogenetic inclusions in the form of individual CNTs, thus resulting in a three-dimensionally enlarged photosensitive interface. Photodetector devices were obtained, detecting low light in…
▽ More
We demonstrate that single crystals of methylammonium lead bromide (MAPbBr3) could be grown directly on vertically aligned carbon nanotube (VACNT) forests. The fast-growing MAPbBr3 single crystals engulfed the protogenetic inclusions in the form of individual CNTs, thus resulting in a three-dimensionally enlarged photosensitive interface. Photodetector devices were obtained, detecting low light intensities (~20 nW) from UV range to 550 nm. Moreover, a photocurrent was recorded at zero external bias voltage which points to the plausible formation of a p-n junction resulting from interpenetration of MAPbBr3 single crystals into the VACNT forest. This reveals that vertically aligned CNTs can be used as electrodes in operationally stable perovskite-based optoelectronic devices and can serve as a versatile platform for future selective electrode development.
△ Less
Submitted 1 May, 2021;
originally announced May 2021.
-
Acoustic-pressure-assisted engineering of aluminium foams
Authors:
Xavier Mettan,
Edoardo Martino,
Lidia Rossi,
Jacim Jacimovic,
Juraj Krsnik,
Osor S. Barisic,
Norbert Babcsán,
Sándor Beke,
Rajmund Mokso,
George Kaptay,
László Forró
Abstract:
Foaming metals modulates their physical properties, enabling attractive applications where lightweight, low thermal conductivity or acoustic isolation are desirable. Adjusting the size of the bubbles in the foams is particularly relevant for targeted applications. Here we provide a method with a detailed theoretical understanding how to tune the size of the bubbles in aluminium melts in-situ via a…
▽ More
Foaming metals modulates their physical properties, enabling attractive applications where lightweight, low thermal conductivity or acoustic isolation are desirable. Adjusting the size of the bubbles in the foams is particularly relevant for targeted applications. Here we provide a method with a detailed theoretical understanding how to tune the size of the bubbles in aluminium melts in-situ via acoustic pressure. Our description is in full agreement with the high-rate three-dimensional X-Ray radioscopy of the bubble formation. We complement our study with the intriguing results on the effect of foaming on electrical resistivity, Seebeck coefficient and thermal conductivity from cryogenic to room temperature. Compared to bulk materials the investigated foam shows an enhancement in the thermoelectric figure of merit. These results herald promising application of foaming in thermoelectrics materials and devices for thermal energy conversion.
△ Less
Submitted 28 March, 2021;
originally announced March 2021.
-
Tuning of the Thermoelectric Figure of Merit of CH$_3$NH$_3$MI$_3$ (M=Pb,Sn) Photovoltaic Perovskites
Authors:
Xavier Mettan,
Riccardo Pisoni,
Péter Matus,
Andrea Pisoni,
Jaćim Jaćimović,
Bálint Náfrádi,
Massimo Spina,
Davor Pavuna,
László Forró,
Endre Horváth
Abstract:
The hybrid halide perovskites, the very performant compounds in photovoltaic applications, possess large Seebeck coefficient and low thermal conductivity making them potentially interesting high figure of merit ($ZT$) materials. For this purpose one needs to tune the electrical conductivity of these semiconductors to higher values. We have studied the CH$_3$NH$_3$MI$_3$ (M=Pb,Sn) samples in pristi…
▽ More
The hybrid halide perovskites, the very performant compounds in photovoltaic applications, possess large Seebeck coefficient and low thermal conductivity making them potentially interesting high figure of merit ($ZT$) materials. For this purpose one needs to tune the electrical conductivity of these semiconductors to higher values. We have studied the CH$_3$NH$_3$MI$_3$ (M=Pb,Sn) samples in pristine form showing very low $ZT$ values for both materials; however, photoinduced do** (in M=Pb) and chemical do** (in M=Sn) indicate that, by further do** optimization, $ZT$ can be enhanced toward unity and reach the performance level of the presently most efficient thermoelectric materials.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
