-
Chemical Vapour Deposition Graphene-PMMA Nanolaminates for Flexible Gas Barrier
Authors:
Antonio Baldanza,
Maria Giovanna Pastore Carbone,
Cosimo Brondi,
Anastasios C. Manikas,
Giuseppe Mensitieri,
Christos Pavlou,
Giuseppe Scherillo,
Costas Galiotis
Abstract:
Successful ways of fully exploiting the excellent structural and multifunctional performance of graphene and related materials are of great scientific and technological interest. New opportunities are provided by the fabrication of a novel class of nanocomposites with a nanolaminate architecture. In this work, by using the iterative lift-off/float-on process combined with wet depositions, we incor…
▽ More
Successful ways of fully exploiting the excellent structural and multifunctional performance of graphene and related materials are of great scientific and technological interest. New opportunities are provided by the fabrication of a novel class of nanocomposites with a nanolaminate architecture. In this work, by using the iterative lift-off/float-on process combined with wet depositions, we incorporated cm-size graphene monolayers produced via Chemical Vapour Deposition into a poly (methyl methacrylate) (PMMA) matrix with a controlled, alternate-layered structure. The produced nanolaminate shows a significant improvement in mechanical properties, with enhanced stiffness, strength and toughness, with the addition of only 0.06 vol% of graphene. Furthermore, oxygen and carbon dioxide permeability measurements performed at different relative humidity levels, reveal that the addition of graphene leads to significant reduction of permeability, compared to neat PMMA. Overall, we demonstrate that the produced graphene-PMMA nanolaminate surpasses, in terms of gas barrier properties, the traditional discontinuous graphene-particle composites with a similar filler content. Moreover, we found that the gas permeability through the nanocomposites departs from a monotonic decrease as a function of relative humidity, which is instead evident in the case of the pure PMMA nanolaminate. This work suggests the possible use of Chemical Vapour Deposition graphene-polymer nanolaminates as a flexible gas barrier, thus enlarging the spectrum of applications for this novel material.
△ Less
Submitted 22 August, 2022;
originally announced September 2022.
-
A Novel Approach for an Integrated Straw tube-Microstrip Detector
Authors:
E. Basile,
F. Bellucci,
L. Benussi,
M. Bertani,
S. Bianco,
M. A. Caponero,
D. Colonna,
F. Di Falco,
F. L. Fabbri,
F. Felli,
M. Giardoni,
A. La Monaca,
G. Mensitieri,
B. Ortenzi,
M. Pallotta,
A. Paolozzi,
L. Passamonti,
D. Pierluigi,
C. Pucci,
A. Russo,
G. Saviano,
F. Massa,
F. Casali,
M. Bettuzzi,
D. Bianconi F. Baruffaldi
, et al. (1 additional authors not shown)
Abstract:
We report on a novel concept of silicon microstrips and straw tubes detector, where integration is accomplished by a straw module with straws not subjected to mechanical tension in a Rohacell $^{\circledR}$ lattice and carbon fiber reinforced plastic shell. Results on mechanical and test beam performances are reported on as well.
We report on a novel concept of silicon microstrips and straw tubes detector, where integration is accomplished by a straw module with straws not subjected to mechanical tension in a Rohacell $^{\circledR}$ lattice and carbon fiber reinforced plastic shell. Results on mechanical and test beam performances are reported on as well.
△ Less
Submitted 28 December, 2005;
originally announced December 2005.
-
Two- and Three-Dimensional Reconstruction and Analysis of the Straw Tubes Tomography in the Btev Experiment
Authors:
E. Basile,
F. Bellucci,
L. Benussi,
M. Bertani,
S. Bianco,
M. A. Caponero,
D. Colonna,
F. Di Falco,
F. L. Fabbri,
F. Felli,
M. Giardoni,
A. La Monaca,
F. Massa,
G. Mensitieri,
B. Ortenzi,
M. Pallotta,
A. Paolozzi,
L. Passamonti,
D. Pierluigi,
C. Pucci,
A. Russo,
G. Saviano F. Casali,
M. Bettuzzi,
D. Bianconi
Abstract:
A check of the eccentricity of the aluminised kapton straw tubes used in the BTeV experiment is accomplished using X-ray tomography of the section of tubes modules. 2 and 3-dimensional images of the single tubes and of the modules are reconstructed and analysed. Preliminary results show that a precision better than 40 $μ$m can be reached on the measurement of the straw radii.
A check of the eccentricity of the aluminised kapton straw tubes used in the BTeV experiment is accomplished using X-ray tomography of the section of tubes modules. 2 and 3-dimensional images of the single tubes and of the modules are reconstructed and analysed. Preliminary results show that a precision better than 40 $μ$m can be reached on the measurement of the straw radii.
△ Less
Submitted 28 December, 2005;
originally announced December 2005.
-
Micrometric Position Monitoring Using Fiber Bragg Grating Sensors in Silicon Detectors
Authors:
E. Basile,
F. Bellucci,
L. Benussi,
M. Bertani,
S. Bianco,
M. A. Caponero,
D. Colonna,
F. Di Falco,
F. L. Fabbri,
F. Felli,
M. Giardoni,
A. La Monaca,
F. Massa,
G. Mensitieri,
B. Ortenzi,
M. Pallotta,
A. Paolozzi,
L. Passamonti,
D. Pierluigi,
C. Pucci,
A. Russo,
G. Saviano
Abstract:
We show R&D results including long term stability, resolution, radiation hardness and characterization of Fiber Grating sensors used to monitor structure deformation, repositioning and surveying of silicon detector in High Energy Physics.
We show R&D results including long term stability, resolution, radiation hardness and characterization of Fiber Grating sensors used to monitor structure deformation, repositioning and surveying of silicon detector in High Energy Physics.
△ Less
Submitted 28 December, 2005;
originally announced December 2005.
-
An Uncoventional Approach for a Straw Tube-Microstrip Detector
Authors:
E. Basile,
F. Bellucci,
L. Benussi,
M. Bertani,
S. Bianco,
M. A. Caponero,
D. Colonna,
F. Di Falco,
F. L. Fabbri,
F. Felli,
M. Giardoni,
A. La Monaca,
G. Mensitieri,
B. Ortenzi,
M. Pallotta,
A. Paolozzi,
L. Passamonti,
D. Pierluigi,
C. Pucci,
A. Russo,
G. Saviano,
S. Tomassini
Abstract:
We report on a novel concept of silicon microstrips and straw tubes detector, where integration is accomplished by a straw module with straws not subjected to mechanical tension in a Rohacell lattice and carbon fiber reinforced plastic shell. Results on mechanical and test beam performances are reported on as well.
We report on a novel concept of silicon microstrips and straw tubes detector, where integration is accomplished by a straw module with straws not subjected to mechanical tension in a Rohacell lattice and carbon fiber reinforced plastic shell. Results on mechanical and test beam performances are reported on as well.
△ Less
Submitted 16 December, 2004;
originally announced December 2004.
