-
A 260 pc resolution ALMA map of HCN(1-0) in the galaxy NGC 4321
Authors:
Lukas Neumann,
Frank Bigiel,
Ashley T. Barnes,
Molly J. Gallagher,
Adam Leroy,
Antonio Usero,
Erik Rosolowsky,
Ivana Bešlić,
Médéric Boquien,
Yixian Cao,
Mélanie Chevance,
Dario Colombo,
Daniel A. Dale,
Cosima Eibensteiner,
Kathryn Grasha,
Jonathan D. Henshaw,
María J. Jiménez-Donaire,
Sharon Meidt,
Shyam H. Menon,
Eric J. Murphy,
Hsi-An Pan,
Miguel Querejeta,
Toshiki Saito,
Eva Schinnerer,
Sophia K. Stuber
, et al. (2 additional authors not shown)
Abstract:
The star formation rate (SFR) is tightly connected to the amount of dense gas in molecular clouds. However, it is not fully understood how the relationship between dense molecular gas and star formation varies within galaxies and in different morphological environments. In this work, we study dense gas and star formation in the nearby spiral galaxy NGC 4321 to test how the amount of dense gas and…
▽ More
The star formation rate (SFR) is tightly connected to the amount of dense gas in molecular clouds. However, it is not fully understood how the relationship between dense molecular gas and star formation varies within galaxies and in different morphological environments. In this work, we study dense gas and star formation in the nearby spiral galaxy NGC 4321 to test how the amount of dense gas and its ability to form stars varies with environmental properties at 260 pc scales. We present new ALMA observations of HCN(1-0) line emission. Combined with existing CO(2-1) observations from ALMA, and H-alpha from MUSE, as well as F2100W from JWST to trace the SFR, we measure the HCN/CO line ratio, a proxy for the dense gas fraction and SFR/HCN, a proxy for the star formation efficiency of the dense gas. Towards the centre of the galaxy, HCN/CO systematically increases while SFR/HCN decreases, but these ratios stay roughly constant throughout the disc. Spiral arms, interarm regions, and bar ends show similar HCN/CO and SFR/HCN. On the bar, there is a significantly lower SFR/HCN at a similar HCN/CO. We conclude that the centres of galaxies show the strongest environmental influence on dense gas and star formation, suggesting either that clouds couple strongly to the surrounding pressure or that HCN is tracing more of the bulk molecular gas that is less efficiently converted into stars. On the contrary, across the disc of NGC 4321, where the ISM pressure is typically low, SFR/HCN does not show large variations (< 0.3 dex) in agreement with Galactic observations of molecular clouds. Despite the large variations across environments and physical conditions, HCN/CO is a good predictor of the mean molecular gas surface density at 260 pc scales.
△ Less
Submitted 17 June, 2024;
originally announced June 2024.
-
Population III star formation in the presence of turbulence, magnetic fields and ionizing radiation feedback
Authors:
Piyush Sharda,
Shyam H. Menon
Abstract:
Turbulence, magnetic fields and radiation feedback are key components that shape the formation of stars, especially in the metal-free environments at high redshifts where Population III stars form. Yet no 3D numerical simulations exist that simultaneously take all of these into account. We present the first suite of radiation-magnetohydrodynamics (RMHD) simulations of Population III star formation…
▽ More
Turbulence, magnetic fields and radiation feedback are key components that shape the formation of stars, especially in the metal-free environments at high redshifts where Population III stars form. Yet no 3D numerical simulations exist that simultaneously take all of these into account. We present the first suite of radiation-magnetohydrodynamics (RMHD) simulations of Population III star formation using the adaptive mesh refinement (AMR) code FLASH. We include both turbulent magnetic fields and ionizing radiation feedback coupled to primordial chemistry, and resolve the collapse of primordial clouds down to few au. We find that dynamically strong magnetic fields significantly slow down accretion onto protostars, while ionizing feedback is largely unable to regulate gas accretion because the partially ionized \ion{H}{ii} region gets trapped near the star due to insufficient radiative outputs from the star. The maximum stellar mass in the HD and RHD simulations that only yield one star exceeds $100\,\rm{M_{\odot}}$ within the first $5000\,\rm{yr}$. However, in the corresponding MHD and RMHD runs, the maximum mass of Population III star is only $60\,\rm{M_{\odot}}$. In other realizations where we observe widespread fragmentation leading to the formation of Population III star clusters, the maximum stellar mass is further reduced by a factor of few due to fragmentation-induced starvation. We thus conclude that magnetic fields are more important than ionizing feedback in regulating the mass of the star, at least during the earliest stages of Population III star formation, in typical dark matter minihaloes at $z \approx 30$.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
The Interplay between the IMF and Star Formation Efficiency through Radiative Feedback at High Stellar Surface Densities
Authors:
Shyam H. Menon,
Lachlan Lancaster,
Blakesley Burkhart,
Rachel S. Somerville,
Avishai Dekel,
Mark R. Krumholz
Abstract:
The observed rest-UV luminosity function at cosmic dawn ($z \sim 8-14$) measured by JWST revealed an excess of UV-luminous galaxies relative to many pre-launch theoretical predictions. A high star-formation efficiency (SFE) and a top-heavy initial mass function (IMF) are among the mechanisms proposed for explaining this excess. Although a top-heavy IMF has been proposed for its ability to increase…
▽ More
The observed rest-UV luminosity function at cosmic dawn ($z \sim 8-14$) measured by JWST revealed an excess of UV-luminous galaxies relative to many pre-launch theoretical predictions. A high star-formation efficiency (SFE) and a top-heavy initial mass function (IMF) are among the mechanisms proposed for explaining this excess. Although a top-heavy IMF has been proposed for its ability to increase the light-to-mass ratio (\(Ψ_{\mathrm{UV}}\)), the resulting enhanced radiative pressure from young stars could decrease the star formation efficiency (SFE), potentially driving galaxy luminosities back down. In this Letter, we use idealized radiation hydrodynamic simulations of star cluster formation to explore the effects of a top-heavy IMF on the SFE of clouds typical of the high pressure conditions found at these redshifts. We find that the SFE in star clusters with solar neighbourhood-like dust abundance decreases with increasingly top-heavy IMF's -- by $\sim 20 \%$ for an increase of factor 4 in $Ψ_{\mathrm{UV}}$, and by $50 \%$ for a factor $ \sim 10$ in $Ψ_{\mathrm{UV}}$. However, we find that an expected decrease in the dust-to-gas ratio ($\sim 0.01 \times \mathrm{Solar}$) at these redshifts can completely compensate for the enhanced light output. This leads to a (cloud-scale; $\sim 10 \, \mathrm{pc}$) SFE that is $\gtrsim 70\%$ even for a factor 10 increase in $Ψ_{\mathrm{UV}}$, implying that highly efficient star formation is unavoidable for high surface density and low metallicity conditions. Our results suggest that a top-heavy IMF, if present, likely coexists with efficient star formation in these galaxies.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Performance-Aligned LLMs for Generating Fast Code
Authors:
Daniel Nichols,
Pranav Polasam,
Harshitha Menon,
Aniruddha Marathe,
Todd Gamblin,
Abhinav Bhatele
Abstract:
Optimizing scientific software is a difficult task because codebases are often large and complex, and performance can depend upon several factors including the algorithm, its implementation, and hardware among others. Causes of poor performance can originate from disparate sources and be difficult to diagnose. Recent years have seen a multitude of work that use large language models (LLMs) to assi…
▽ More
Optimizing scientific software is a difficult task because codebases are often large and complex, and performance can depend upon several factors including the algorithm, its implementation, and hardware among others. Causes of poor performance can originate from disparate sources and be difficult to diagnose. Recent years have seen a multitude of work that use large language models (LLMs) to assist in software development tasks. However, these tools are trained to model the distribution of code as text, and are not specifically designed to understand performance aspects of code. In this work, we introduce a reinforcement learning based methodology to align the outputs of code LLMs with performance. This allows us to build upon the current code modeling capabilities of LLMs and extend them to generate better performing code. We demonstrate that our fine-tuned model improves the expected speedup of generated code over base models for a set of benchmark tasks from 0.9 to 1.6 for serial code and 1.9 to 4.5 for OpenMP code.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Taking GPU Programming Models to Task for Performance Portability
Authors:
Joshua H. Davis,
Pranav Sivaraman,
Joy Kitson,
Konstantinos Parasyris,
Harshitha Menon,
Isaac Minn,
Giorgis Georgakoudis,
Abhinav Bhatele
Abstract:
Portability is critical to ensuring high productivity in develo** and maintaining scientific software as the diversity in on-node hardware architectures increases. While several programming models provide portability for diverse GPU platforms, they don't make any guarantees about performance portability. In this work, we explore several programming models -- CUDA, HIP, Kokkos, RAJA, OpenMP, Open…
▽ More
Portability is critical to ensuring high productivity in develo** and maintaining scientific software as the diversity in on-node hardware architectures increases. While several programming models provide portability for diverse GPU platforms, they don't make any guarantees about performance portability. In this work, we explore several programming models -- CUDA, HIP, Kokkos, RAJA, OpenMP, OpenACC, and SYCL, to study if the performance of these models is consistently good across NVIDIA and AMD GPUs. We use five proxy applications from different scientific domains, create implementations where missing, and use them to present a comprehensive comparative evaluation of the programming models. We provide a Spack scripting-based methodology to ensure reproducibility of experiments conducted in this work. Finally, we attempt to answer the question -- to what extent does each programming model provide performance portability for heterogeneous systems in real-world usage?
△ Less
Submitted 21 May, 2024; v1 submitted 14 February, 2024;
originally announced February 2024.
-
Hidden Gems on a Ring: Infant Massive Clusters and Their Formation Timeline Unveiled by ALMA, HST, and JWST in NGC 3351
Authors:
Jiayi Sun,
Hao He,
Kyle Batschkun,
Rebecca C. Levy,
Kimberly Emig,
M. Jimena Rodriguez,
Hamid Hassani,
Adam K. Leroy,
Eva Schinnerer,
Eve C. Ostriker,
Christine D. Wilson,
Alberto D. Bolatto,
Elisabeth A. C. Mills,
Erik Rosolowsky,
Janice C. Lee,
Daniel A. Dale,
Kirsten L. Larson,
David A. Thilker,
Leonardo Ubeda,
Bradley C. Whitmore,
Thomas G. Williams,
Ashley. T. Barnes,
Frank Bigiel,
Melanie Chevance,
Simon C. O. Glover
, et al. (16 additional authors not shown)
Abstract:
We study young massive clusters (YMCs) in their embedded "infant" phase with $\sim0.\!^{\prime\prime}1$ ALMA, HST, and JWST observations targeting the central starburst ring in NGC 3351, a nearby Milky Way analog galaxy. Our new ALMA data reveal 18 bright and compact (sub-)millimeter continuum sources, of which 8 have counterparts in JWST images and only 6 have counterparts in HST images. Based on…
▽ More
We study young massive clusters (YMCs) in their embedded "infant" phase with $\sim0.\!^{\prime\prime}1$ ALMA, HST, and JWST observations targeting the central starburst ring in NGC 3351, a nearby Milky Way analog galaxy. Our new ALMA data reveal 18 bright and compact (sub-)millimeter continuum sources, of which 8 have counterparts in JWST images and only 6 have counterparts in HST images. Based on the ALMA continuum and molecular line data, as well as ancillary measurements for the HST and JWST counterparts, we identify 14 sources as infant star clusters with high stellar and/or gas masses (${\sim}10^5\;\mathrm{M_\odot}$), small radii (${\lesssim}\,5\;\mathrm{pc}$), large escape velocities ($6{-}10\;\mathrm{km/s}$), and short free-fall times ($0.5{-}1\;\mathrm{Myr}$). Their multiwavelength properties motivate us to divide them into four categories, likely corresponding to four evolutionary stages from starless clumps to exposed HII region-cluster complexes. Leveraging age estimates for HST-identified clusters in the same region, we infer an evolutionary timeline going from $\sim$1-2 Myr before cluster formation as starless clumps, to $\sim$4-6 Myr after as exposed HII region-cluster complexes. Finally, we show that the YMCs make up a substantial fraction of recent star formation across the ring, exhibit an non-uniform azimuthal distribution without a very coherent evolutionary trend along the ring, and are capable of driving large-scale gas outflows.
△ Less
Submitted 10 April, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
Pseudo-Labeling for Domain-Agnostic Bangla Automatic Speech Recognition
Authors:
Rabindra Nath Nandi,
Mehadi Hasan Menon,
Tareq Al Muntasir,
Sagor Sarker,
Quazi Sarwar Muhtaseem,
Md. Tariqul Islam,
Shammur Absar Chowdhury,
Firoj Alam
Abstract:
One of the major challenges for develo** automatic speech recognition (ASR) for low-resource languages is the limited access to labeled data with domain-specific variations. In this study, we propose a pseudo-labeling approach to develop a large-scale domain-agnostic ASR dataset. With the proposed methodology, we developed a 20k+ hours labeled Bangla speech dataset covering diverse topics, speak…
▽ More
One of the major challenges for develo** automatic speech recognition (ASR) for low-resource languages is the limited access to labeled data with domain-specific variations. In this study, we propose a pseudo-labeling approach to develop a large-scale domain-agnostic ASR dataset. With the proposed methodology, we developed a 20k+ hours labeled Bangla speech dataset covering diverse topics, speaking styles, dialects, noisy environments, and conversational scenarios. We then exploited the developed corpus to design a conformer-based ASR system. We benchmarked the trained ASR with publicly available datasets and compared it with other available models. To investigate the efficacy, we designed and developed a human-annotated domain-agnostic test set composed of news, telephony, and conversational data among others. Our results demonstrate the efficacy of the model trained on psuedo-label data for the designed test-set along with publicly-available Bangla datasets. The experimental resources will be publicly available.(https://github.com/hishab-nlp/Pseudo-Labeling-for-Domain-Agnostic-Bangla-ASR)
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
HPAC-Offload: Accelerating HPC Applications with Portable Approximate Computing on the GPU
Authors:
Zane Fink,
Konstantinos Parasyris,
Giorgis Georgakoudis,
Harshitha Menon
Abstract:
The end of Dennard scaling and the slowdown of Moore's law led to a shift in technology trends toward parallel architectures, particularly in HPC systems. To continue providing performance benefits, HPC should embrace Approximate Computing (AC), which trades application quality loss for improved performance. However, existing AC techniques have not been extensively applied and evaluated in state-o…
▽ More
The end of Dennard scaling and the slowdown of Moore's law led to a shift in technology trends toward parallel architectures, particularly in HPC systems. To continue providing performance benefits, HPC should embrace Approximate Computing (AC), which trades application quality loss for improved performance. However, existing AC techniques have not been extensively applied and evaluated in state-of-the-art hardware architectures such as GPUs, the primary execution vehicle for HPC applications today.
This paper presents HPAC-Offload, a pragma-based programming model that extends OpenMP offload applications to support AC techniques, allowing portable approximations across different GPU architectures. We conduct a comprehensive performance analysis of HPAC-Offload across GPU-accelerated HPC applications, revealing that AC techniques can significantly accelerate HPC applications (1.64x LULESH on AMD, 1.57x NVIDIA) with minimal quality loss (0.1%). Our analysis offers deep insights into the performance of GPU-based AC that guide the future development of AC algorithms and systems for these architectures.
△ Less
Submitted 31 August, 2023;
originally announced August 2023.
-
HPC-Coder: Modeling Parallel Programs using Large Language Models
Authors:
Daniel Nichols,
Aniruddha Marathe,
Harshitha Menon,
Todd Gamblin,
Abhinav Bhatele
Abstract:
Parallel programs in high performance computing (HPC) continue to grow in complexity and scale in the exascale era. The diversity in hardware and parallel programming models make develo**, optimizing, and maintaining parallel software even more burdensome for developers. One way to alleviate some of these burdens is with automated development and analysis tools. Such tools can perform complex an…
▽ More
Parallel programs in high performance computing (HPC) continue to grow in complexity and scale in the exascale era. The diversity in hardware and parallel programming models make develo**, optimizing, and maintaining parallel software even more burdensome for developers. One way to alleviate some of these burdens is with automated development and analysis tools. Such tools can perform complex and/or remedial tasks for developers that increase their productivity and decrease the chance for error. Until recently, such tools for code development and performance analysis have been limited in the complexity of tasks they can perform, especially for parallel programs. However, with recent advancements in language modeling, and the availability of large amounts of open-source code related data, these tools have started to utilize predictive language models to automate more complex tasks. In this paper, we show how large language models (LLMs) can be applied to tasks specific to high performance and scientific codes. We introduce a new dataset of HPC and scientific codes and use it to fine-tune several pre-trained models. We compare several pre-trained LLMs on HPC-related tasks and introduce a new model, HPC-Coder, fine-tuned on parallel codes. In our experiments, we show that this model can auto-complete HPC functions where generic models cannot, decorate for loops with OpenMP pragmas, and model performance changes in scientific application repositories as well as programming competition solutions.
△ Less
Submitted 14 May, 2024; v1 submitted 29 June, 2023;
originally announced June 2023.
-
Understanding Automatic Differentiation Pitfalls
Authors:
Jan Hückelheim,
Harshitha Menon,
William Moses,
Bruce Christianson,
Paul Hovland,
Laurent Hascoët
Abstract:
Automatic differentiation, also known as backpropagation, AD, autodiff, or algorithmic differentiation, is a popular technique for computing derivatives of computer programs accurately and efficiently. Sometimes, however, the derivatives computed by AD could be interpreted as incorrect. These pitfalls occur systematically across tools and approaches. In this paper we broadly categorize problematic…
▽ More
Automatic differentiation, also known as backpropagation, AD, autodiff, or algorithmic differentiation, is a popular technique for computing derivatives of computer programs accurately and efficiently. Sometimes, however, the derivatives computed by AD could be interpreted as incorrect. These pitfalls occur systematically across tools and approaches. In this paper we broadly categorize problematic usages of AD and illustrate each category with examples such as chaos, time-averaged oscillations, discretizations, fixed-point loops, lookup tables, and linear solvers. We also review debugging techniques and their effectiveness in these situations. With this article we hope to help readers avoid unexpected behavior, detect problems more easily when they occur, and have more realistic expectations from AD tools.
△ Less
Submitted 12 May, 2023;
originally announced May 2023.
-
Fast And Automatic Floating Point Error Analysis With CHEF-FP
Authors:
Garima Singh,
Baidyanath Kundu,
Harshitha Menon,
Alexander Penev,
David J. Lange,
Vassil Vassilev
Abstract:
As we reach the limit of Moore's Law, researchers are exploring different paradigms to achieve unprecedented performance. Approximate Computing (AC), which relies on the ability of applications to tolerate some error in the results to trade-off accuracy for performance, has shown significant promise. Despite the success of AC in domains such as Machine Learning, its acceptance in High-Performance…
▽ More
As we reach the limit of Moore's Law, researchers are exploring different paradigms to achieve unprecedented performance. Approximate Computing (AC), which relies on the ability of applications to tolerate some error in the results to trade-off accuracy for performance, has shown significant promise. Despite the success of AC in domains such as Machine Learning, its acceptance in High-Performance Computing (HPC) is limited due to stringent requirements for accuracy. We need tools and techniques to identify regions of code that are amenable to approximations and their impact on the application output quality to guide developers to employ selective approximation. To this end, we propose CHEF-FP, a flexible, scalable, and easy-to-use source-code transformation tool based on Automatic Differentiation (AD) for analyzing approximation errors in HPC applications. CHEF-FP uses Clad, an efficient AD tool built as a plugin to the Clang compiler and based on the LLVM compiler infrastructure, as a backend and utilizes its AD abilities to evaluate approximation errors in C++ code. CHEF-FP works at the source by injecting error estimation code into the generated adjoints. This enables the error-estimation code to undergo compiler optimizations resulting in improved analysis time and reduced memory usage. We also provide theoretical and architectural augmentations to source code transformation-based AD tools to perform FP error analysis. This paper primarily focuses on analyzing errors introduced by mixed-precision AC techniques. We also show the applicability of our tool in estimating other kinds of errors by evaluating our tool on codes that use approximate functions. Moreover, we demonstrate the speedups CHEF-FP achieved during analysis time compared to the existing state-of-the-art tool due to its ability to generate and insert approximation error estimate code directly into the derivative source.
△ Less
Submitted 13 April, 2023;
originally announced April 2023.
-
Outflows Driven by Direct and Reprocessed Radiation Pressure in Massive Star Clusters
Authors:
Shyam H. Menon,
Christoph Federrath,
Mark R. Krumholz
Abstract:
We use three-dimensional radiation hydrodynamic (RHD) simulations to study the formation of massive star clusters under the combined effects of direct ultraviolet (UV) and dust-reprocessed infrared (IR) radiation pressure. We explore a broad range of mass surface density $Σ\sim 10^2$-$10^5 \, \mathrm{M}_{\odot} \, \mathrm{pc}^{-2}$, spanning values typical of weakly star-forming galaxies to extrem…
▽ More
We use three-dimensional radiation hydrodynamic (RHD) simulations to study the formation of massive star clusters under the combined effects of direct ultraviolet (UV) and dust-reprocessed infrared (IR) radiation pressure. We explore a broad range of mass surface density $Σ\sim 10^2$-$10^5 \, \mathrm{M}_{\odot} \, \mathrm{pc}^{-2}$, spanning values typical of weakly star-forming galaxies to extreme systems such as clouds forming super-star clusters, where radiation pressure is expected to be the dominant feedback mechanism. We find that star formation can only be regulated by radiation pressure for $Σ\lesssim 10^3 \, \mathrm{M}_{\odot} \, \mathrm{pc}^{-2}$, but that clouds with $Σ\lesssim 10^5 \, \mathrm{M}_{\odot} \, \mathrm{pc}^{-2}$ become super-Eddington once high star formation efficiencies ($\sim 80 \%$) are reached, and therefore launch the remaining gas in a steady outflow. These outflows achieve mass-weighted radial velocities of $\sim 15$ - $30 \,\mathrm{km} \, \mathrm{s}^{-1}$, which is $\sim 0.5$ - $2.0$ times the cloud escape speed. This suggests that radiation pressure is a strong candidate to explain recently observed molecular outflows found in young super-star clusters in nearby starburst galaxies. We quantify the relative importance of UV and IR radiation pressure in different regimes, and deduce that both are equally important for $Σ\sim 10^3 \, \mathrm{M}_{\odot} \, \mathrm{pc}^{-2}$, whereas clouds with higher (lower) density are increasingly dominated by the IR (UV) component. Comparison with control runs without either the UV or IR bands suggests that the outflows are primarily driven by the impulse provided by the UV component, while IR radiation has the effect of rendering a larger fraction of gas super-Eddington, and thereby increasing the outflow mass flux by a factor of $\sim 2$.
△ Less
Submitted 20 March, 2023; v1 submitted 6 October, 2022;
originally announced October 2022.
-
Infrared Radiation Feedback Does Not Regulate Star Cluster Formation
Authors:
Shyam H. Menon,
Christoph Federrath,
Mark R. Krumholz
Abstract:
We present 3D radiation-hydrodynamical (RHD) simulations of star cluster formation and evolution in massive, self-gravitating clouds, whose dust columns are optically thick to infrared (IR) photons. We use \texttt{VETTAM} -- a recently developed, novel RHD algorithm, which uses the Variable Eddington Tensor (VET) closure -- to model the IR radiation transport through the cloud. We also use realist…
▽ More
We present 3D radiation-hydrodynamical (RHD) simulations of star cluster formation and evolution in massive, self-gravitating clouds, whose dust columns are optically thick to infrared (IR) photons. We use \texttt{VETTAM} -- a recently developed, novel RHD algorithm, which uses the Variable Eddington Tensor (VET) closure -- to model the IR radiation transport through the cloud. We also use realistic temperature ($T$) dependent IR opacities ($κ$) in our simulations, improving upon earlier works in this area, which used either constant IR opacities or simplified power laws ($κ\propto T^2$). We investigate the impact of the radiation pressure of these IR photons on the star formation efficiency (SFE) of the cloud, and its potential to drive dusty winds. We find that IR radiation pressure is unable to regulate star formation or prevent accretion onto the star clusters, even for very high gas surface densities ($Σ> 10^5 M_{\odot} \, \mathrm{pc}^{-2}$), contrary to recent semi-analytic predictions and simulation results using simplified treatments of the dust opacity. We find that the commonly adopted simplifications of $κ\propto T^2$ or constant $κ$ for the IR dust opacities leads to this discrepancy, as those approximations overestimate the radiation force. By contrast, with realistic opacities that take into account the micro-physics of the dust, we find that the impact of IR radiation pressure on star formation is very mild, even at significantly high dust-to-gas ratios ($\sim 3$ times solar), suggesting that it is unlikely to be an important feedback mechanism in controlling star formation in the ISM.
△ Less
Submitted 22 September, 2022; v1 submitted 28 June, 2022;
originally announced June 2022.
-
A radiation hydrodynamics scheme on adaptive meshes using the Variable Eddington Tensor (VET) closure
Authors:
Shyam H. Menon,
Christoph Federrath,
Mark R. Krumholz,
Rolf Kuiper,
Benjamin D. Wibking,
Manuel Jung
Abstract:
We present a new algorithm to solve the equations of radiation hydrodynamics (RHD) in a frequency-integrated, two-moment formulation. Novel features of the algorithm include i) the adoption of a non-local Variable Eddington Tensor (VET) closure for the radiation moment equations, computed with a ray-tracing method, ii) support for adaptive mesh refinement (AMR), iii) use of a time-implicit Godunov…
▽ More
We present a new algorithm to solve the equations of radiation hydrodynamics (RHD) in a frequency-integrated, two-moment formulation. Novel features of the algorithm include i) the adoption of a non-local Variable Eddington Tensor (VET) closure for the radiation moment equations, computed with a ray-tracing method, ii) support for adaptive mesh refinement (AMR), iii) use of a time-implicit Godunov method for the hyperbolic transport of radiation, and iv) a fixed-point Picard iteration scheme to accurately handle the stiff nonlinear gas-radiation energy exchange. Tests demonstrate that our scheme works correctly, yields accurate rates of energy and momentum transfer between gas and radiation, and obtains the correct radiation field distribution even in situations where more commonly used -- but less accurate -- closure relations like the Flux-limited Diffusion and Moment-1 approximations fail. Our scheme presents an important step towards performing RHD simulations with increasing spatial and directional accuracy, effectively improving their predictive capabilities.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
VETTAM: A scheme for radiation hydrodynamics with adaptive mesh refinement using the variable Eddington tensor method
Authors:
Shyam H. Menon,
Christoph Federrath,
Mark R. Krumholz,
Rolf Kuiper,
Benjamin D. Wibking,
Manuel Jung
Abstract:
We present Variable Eddington Tensor-closed Transport on Adaptive Meshes (\texttt{VETTAM}), a new algorithm to solve the equations of radiation hydrodynamics (RHD) with support for adaptive mesh refinement (AMR) in a frequency-integrated, two-moment formulation. The method is based on a non-local Variable Eddington Tensor (VET) closure computed with a hybrid characteristics scheme for ray tracing.…
▽ More
We present Variable Eddington Tensor-closed Transport on Adaptive Meshes (\texttt{VETTAM}), a new algorithm to solve the equations of radiation hydrodynamics (RHD) with support for adaptive mesh refinement (AMR) in a frequency-integrated, two-moment formulation. The method is based on a non-local Variable Eddington Tensor (VET) closure computed with a hybrid characteristics scheme for ray tracing. We use a Godunov method for the hyperbolic transport of radiation with an implicit backwards-Euler temporal update to avoid the explicit timestep constraint imposed by the light-crossing time, and a fixed-point Picard iteration scheme to handle the nonlinear gas-radiation exchange term, with the two implicit update stages jointly iterated to convergence. We also develop a modified wave-speed correction method for AMR, which we find to be crucial for obtaining accurate results in the diffusion regime. We demonstrate the robustness of our scheme with a suite of pure radiation and RHD tests, and show that it successfully captures the streaming, static diffusion, and dynamic diffusion regimes and the spatial transitions between them, casts sharp shadows, and yields accurate results for rates of momentum and energy exchange between radiation and gas. A comparison between different closures for the radiation moment equations, with the Eddington approximation (0th-moment closure) and the $M_1$ approximation (1st-moment closure), demonstrates the advantages of the VET method (2nd-moment closure) over the simpler closure schemes. \texttt{VETTAM} has been coupled to the AMR \texttt{FLASH} (magneto-)hydrodynamics code and we summarize by reporting performance features and bottlenecks of our implementation.
△ Less
Submitted 17 February, 2022;
originally announced February 2022.
-
Reliabuild: Searching for High-Fidelity Builds Using Active Learning
Authors:
Harshitha Menon,
Konstantinos Parasyris,
Tom Scogland,
Todd Gamblin
Abstract:
Modern software is incredibly complex. A typical application may comprise hundreds or thousands of reusable components. Automated package managers can help to maintain a consistent set of dependency versions, but ultimately the solvers in these systems rely on constraints generated by humans. At scale, small errors add up, and it becomes increasingly difficult to find high-fidelity configurations.…
▽ More
Modern software is incredibly complex. A typical application may comprise hundreds or thousands of reusable components. Automated package managers can help to maintain a consistent set of dependency versions, but ultimately the solvers in these systems rely on constraints generated by humans. At scale, small errors add up, and it becomes increasingly difficult to find high-fidelity configurations. We cannot test all configurations, because the space is combinatorial, so exhaustive exploration is infeasible.
In this paper, we present Reliabuild, an auto-tuning framework that efficiently explores the build configuration space and learns which package versions are likely to result in a successful configuration. We implement two models in Reliabuild to rank the different configurations and use adaptive sampling to select good configurations with fewer samples. We demonstrate Reliabuild's effectiveness by evaluating 31,186 build configurations of 61 packages from the Extreme-scale Scientific Software Stack(E4S). Reliabuild selects good configurations efficiently. For example, Reliabuild selects 3X the number of good configurations in comparison to random sampling for several packages including Abyss, Bolt, libnrm, OpenMPI. Our framework is also able to select all the high-fidelity builds in half the number of samples required by random sampling for packages such as Chai, OpenMPI, py-petsc4py, and slepc. We further use the model to learn statistics about the compatibility of different packages, which will enable package solvers to better select high-fidelity build configurations automatically.
△ Less
Submitted 10 February, 2022;
originally announced February 2022.
-
First extragalactic measurement of the turbulence driving parameter: ALMA observations of the star-forming region N159E in the Large Magellanic Cloud
Authors:
Piyush Sharda,
Shyam H. Menon,
Christoph Federrath,
Mark R. Krumholz,
James R. Beattie,
Katherine E. Jameson,
Kazuki Tokuda,
Blakesley Burkhart,
Roland M. Crocker,
Charles J. Law,
Amit Seta,
Terrance J. Gaetz,
Nickolas M. **el,
Ivo R. Seitenzahl,
Hidetoshi Sano,
Yasuo Fukui
Abstract:
Studying the driving modes of turbulence is important for characterizing the impact of turbulence in various astrophysical environments. The driving mode of turbulence is parameterized by $b$, which relates the width of the gas density PDF to the turbulent Mach number; $b\approx 1/3$, $1$, and $0.4$ correspond to driving that is solenoidal, compressive, and a natural mixture of the two, respective…
▽ More
Studying the driving modes of turbulence is important for characterizing the impact of turbulence in various astrophysical environments. The driving mode of turbulence is parameterized by $b$, which relates the width of the gas density PDF to the turbulent Mach number; $b\approx 1/3$, $1$, and $0.4$ correspond to driving that is solenoidal, compressive, and a natural mixture of the two, respectively. In this work, we use high-resolution (sub-pc) ALMA $^{12}$CO ($J$ = $2-1$), $^{13}$CO ($J$ = $2-1$), and C$^{18}$O ($J$ = $2-1$) observations of filamentary molecular clouds in the star-forming region N159E (the Papillon Nebula) in the Large Magellanic Cloud (LMC) to provide the first measurement of turbulence driving parameter in an extragalactic region. We use a non-local thermodynamic equilibrium (NLTE) analysis of the CO isotopologues to construct a gas density PDF, which we find to be largely log-normal in shape with some intermittent features indicating deviations from lognormality. We find that the width of the log-normal part of the density PDF is comparable to the supersonic turbulent Mach number, resulting in $b \approx 0.9$. This implies that the driving mode of turbulence in N159E is primarily compressive. We speculate that the compressive turbulence could have been powered by gravo-turbulent fragmentation of the molecular gas, or due to compression powered by H I flows that led to the development of the molecular filaments observed by ALMA in the region. Our analysis can be easily applied to study the nature of turbulence driving in resolved star-forming regions in the local as well as the high-redshift Universe.
△ Less
Submitted 19 October, 2021; v1 submitted 8 September, 2021;
originally announced September 2021.
-
The Dependence of the Hierarchical Distribution of Star Clusters on Galactic Environment
Authors:
Shyam H. Menon,
Kathryn Grasha,
Bruce G. Elmegreen,
Christoph Federrath,
Mark R. Krumholz,
Daniela Calzetti,
Néstor Sánchez,
Sean T. Linden,
Angela Adamo,
Matteo Messa,
David O. Cook,
Daniel A. Dale,
Eva K. Grebel,
Michele Fumagalli,
Elena Sabbi,
Kelsey E. Johnson,
Linda J. Smith,
Robert C. Kennicutt
Abstract:
We use the angular Two Point Correlation Function (TPCF) to investigate the hierarchical distribution of young star clusters in 12 local (3--18 Mpc) star-forming galaxies using star cluster catalogues obtained with the \textit{Hubble Space Telescope} (\textit{HST}) as part of the Treasury Program LEGUS (Legacy ExtraGalactic UV Survey). The sample spans a range of different morphological types, all…
▽ More
We use the angular Two Point Correlation Function (TPCF) to investigate the hierarchical distribution of young star clusters in 12 local (3--18 Mpc) star-forming galaxies using star cluster catalogues obtained with the \textit{Hubble Space Telescope} (\textit{HST}) as part of the Treasury Program LEGUS (Legacy ExtraGalactic UV Survey). The sample spans a range of different morphological types, allowing us to infer how the physical properties of the galaxy affect the spatial distribution of the clusters. We also prepare a range of physically motivated toy models to compare with and interpret the observed features in the TPCFs. We find that, conforming to earlier studies, young clusters ($T \la 10\, \mathrm{Myr}$) have power-law TPCFs that are characteristic of fractal distributions with a fractal dimension $D_2$, and this scale-free nature extends out to a maximum scale $l_{\mathrm{corr}}$ beyond which the distribution becomes Poissonian. However, $l_{\mathrm{corr}}$, and $D_2$ vary significantly across the sample, and are correlated with a number of host galaxy physical properties, suggesting that there are physical differences in the underlying star cluster distributions. We also find that hierarchical structuring weakens with age, evidenced by flatter TPCFs for older clusters ($T \ga 10\, \mathrm{Myr}$), that eventually converges to the residual correlation expected from a completely random large-scale radial distribution of clusters in the galaxy in $\sim 100 \, \mathrm{Myr}$. Our study demonstrates that the hierarchical distribution of star clusters evolves with age, and is strongly dependent on the properties of the host galaxy environment.
△ Less
Submitted 9 August, 2021;
originally announced August 2021.
-
On the visibility of singularities in general relativity and modified gravity theories
Authors:
Karim Mosani,
Dipanjan Dey,
Pankaj S. Joshi,
Gauranga C. Samanta,
Harikrishnan Menon,
Vaishnavi D. Patel
Abstract:
We investigate the global causal structure of the end state of a spherically symmetric marginally bound Lemaitre-Tolman-Bondi (LTB) \cite{Lemaitre, Tolman, Bondi} collapsing cloud (which is well studied in general relativity) in the framework of modified gravity having the generalized Lagrangian $R+αR^2$ in the action. Here $R$ is the Ricci scalar, and $α\geq 0$ is a constant. By fixing the functi…
▽ More
We investigate the global causal structure of the end state of a spherically symmetric marginally bound Lemaitre-Tolman-Bondi (LTB) \cite{Lemaitre, Tolman, Bondi} collapsing cloud (which is well studied in general relativity) in the framework of modified gravity having the generalized Lagrangian $R+αR^2$ in the action. Here $R$ is the Ricci scalar, and $α\geq 0$ is a constant. By fixing the functional form of the metric components of the LTB spacetime, using up the available degree of freedom, we realize that the matching surface of the interior and the exterior metric are different for different values of $α$. This change in the matching surface can alter the causal property of the first central singularity. We depict this by showing a numerical example. Additionally, for a globally naked singularity to have physical relevance, a congruence of null geodesics should escape from such singularity to be visible to an asymptotic observer for an infinite time. For this to happen, the first central singularity should be a nodal point. We here give a heuristic method to show that this singularity is a nodal point by considering the above class of theory of gravity, of which general relativity is a particular case.
△ Less
Submitted 29 May, 2023; v1 submitted 3 June, 2021;
originally announced June 2021.
-
QDOT: Quantized Dot Product Kernel for Approximate High-Performance Computing
Authors:
James Diffenderfer,
Daniel Osei-Kuffuor,
Harshitha Menon
Abstract:
Approximate computing techniques have been successful in reducing computation and power costs in several domains. However, error sensitive applications in high-performance computing are unable to benefit from existing approximate computing strategies that are not developed with guaranteed error bounds. While approximate computing techniques can be developed for individual high-performance computin…
▽ More
Approximate computing techniques have been successful in reducing computation and power costs in several domains. However, error sensitive applications in high-performance computing are unable to benefit from existing approximate computing strategies that are not developed with guaranteed error bounds. While approximate computing techniques can be developed for individual high-performance computing applications by domain specialists, this often requires additional theoretical analysis and potentially extensive software modification. Hence, the development of low-level error-bounded approximate computing strategies that can be introduced into any high-performance computing application without requiring additional analysis or significant software alterations is desirable. In this paper, we provide a contribution in this direction by proposing a general framework for designing error-bounded approximate computing strategies and apply it to the dot product kernel to develop qdot -- an error-bounded approximate dot product kernel. Following the introduction of qdot, we perform a theoretical analysis that yields a deterministic bound on the relative approximation error introduced by qdot. Empirical tests are performed to illustrate the tightness of the derived error bound and to demonstrate the effectiveness of qdot on a synthetic dataset, as well as two scientific benchmarks -- Conjugate Gradient (CG) and the Power method. In particular, using qdot for the dot products in CG can result in a majority of components being perforated or quantized to half precision without increasing the iteration count required for convergence to the same solution as CG using a double precision dot product.
△ Less
Submitted 30 April, 2021;
originally announced May 2021.
-
DeepHateExplainer: Explainable Hate Speech Detection in Under-resourced Bengali Language
Authors:
Md. Rezaul Karim,
Sumon Kanti Dey,
Tanhim Islam,
Sagor Sarker,
Mehadi Hasan Menon,
Kabir Hossain,
Bharathi Raja Chakravarthi,
Md. Azam Hossain,
Stefan Decker
Abstract:
The exponential growths of social media and micro-blogging sites not only provide platforms for empowering freedom of expressions and individual voices, but also enables people to express anti-social behaviour like online harassment, cyberbullying, and hate speech. Numerous works have been proposed to utilize textual data for social and anti-social behaviour analysis, by predicting the contexts mo…
▽ More
The exponential growths of social media and micro-blogging sites not only provide platforms for empowering freedom of expressions and individual voices, but also enables people to express anti-social behaviour like online harassment, cyberbullying, and hate speech. Numerous works have been proposed to utilize textual data for social and anti-social behaviour analysis, by predicting the contexts mostly for highly-resourced languages like English. However, some languages are under-resourced, e.g., South Asian languages like Bengali, that lack computational resources for accurate natural language processing (NLP). In this paper, we propose an explainable approach for hate speech detection from the under-resourced Bengali language, which we called DeepHateExplainer. Bengali texts are first comprehensively preprocessed, before classifying them into political, personal, geopolitical, and religious hates using a neural ensemble method of transformer-based neural architectures (i.e., monolingual Bangla BERT-base, multilingual BERT-cased/uncased, and XLM-RoBERTa). Important(most and least) terms are then identified using sensitivity analysis and layer-wise relevance propagation(LRP), before providing human-interpretable explanations. Finally, we compute comprehensiveness and sufficiency scores to measure the quality of explanations w.r.t faithfulness. Evaluations against machine learning~(linear and tree-based models) and neural networks (i.e., CNN, Bi-LSTM, and Conv-LSTM with word embeddings) baselines yield F1-scores of 78%, 91%, 89%, and 84%, for political, personal, geopolitical, and religious hates, respectively, outperforming both ML and DNN baselines.
△ Less
Submitted 6 August, 2021; v1 submitted 28 December, 2020;
originally announced December 2020.
-
On the compressive nature of turbulence driven by ionising feedback in the pillars of the Carina Nebula
Authors:
Shyam H. Menon,
Christoph Federrath,
Pamela Klaassen,
Rolf Kuiper,
Megan Reiter
Abstract:
The ionizing radiation of massive stars sculpts the surrounding neutral gas into pillar-like structures. Direct signatures of star formation through outflows and jets are observed in these structures, typically at their tips. Recent numerical simulations have suggested that this star formation could potentially be triggered by photoionising radiation, driving compressive modes of turbulence in the…
▽ More
The ionizing radiation of massive stars sculpts the surrounding neutral gas into pillar-like structures. Direct signatures of star formation through outflows and jets are observed in these structures, typically at their tips. Recent numerical simulations have suggested that this star formation could potentially be triggered by photoionising radiation, driving compressive modes of turbulence in the pillars. In this study we use recent high-resolution ALMA observations of $^{12}\mathrm{CO}$, $^{13}\mathrm{CO}$, and $\mathrm{C}^{18} \mathrm{O}, \; J = 2-1$ emission to test this hypothesis for pillars in the Carina Nebula. We analyse column density and intensity-weighted velocity maps, and subtract any large-scale bulk motions in the plane of the sky to isolate the turbulent motions. We then reconstruct the dominant turbulence driving mode in the pillars, by computing the turbulence driving parameter $b$, characterised by the relation $σ_{ρ/ρ_0} = b \mathcal{M}$ between the standard deviation of the density contrast $σ_{ρ/ρ_0}$ (with gas density $ρ$ and its average $ρ_0$) and the turbulent Mach number $\mathcal{M}$. We find values of \mbox{$b\sim0.7$--$1.0$} for most of the pillars, suggesting that predominantly compressive modes of turbulence are driven in the pillars by the ionising radiation from nearby massive stars. We find that this range of $b$ values can produce star formation rates in the pillars that are a factor $\sim 3$ greater than with $b \sim 0.5$, a typical average value of $b$ for spiral-arm molecular clouds. Our results provide further evidence for the potential triggering of star formation in pillars through compressive turbulent motions.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
On the turbulence driving mode of expanding HII regions
Authors:
Shyam H. Menon,
Christoph Federrath,
Rolf Kuiper
Abstract:
We investigate the turbulence driving mode of ionizing radiation from massive stars on the surrounding interstellar medium (ISM). We run hydrodynamical simulations of a turbulent cloud im**ed by a plane-parallel ionization front. We find that the ionizing radiation forms pillars of neutral gas reminiscent of those seen in observations. We quantify the driving mode of the turbulence in the neutra…
▽ More
We investigate the turbulence driving mode of ionizing radiation from massive stars on the surrounding interstellar medium (ISM). We run hydrodynamical simulations of a turbulent cloud im**ed by a plane-parallel ionization front. We find that the ionizing radiation forms pillars of neutral gas reminiscent of those seen in observations. We quantify the driving mode of the turbulence in the neutral gas by calculating the driving parameter $b$, which is characterised by the relation $σ_s^2 = \ln({1+b^2\mathcal{M}^2})$ between the variance of the logarithmic density contrast $σ_s^2$ (where $s = \ln({ρ/ρ_0})$ with the gas density $ρ$ and its average $ρ_0$), and the turbulent Mach number $\mathcal{M}$. Previous works have shown that $b\sim1/3$ indicates solenoidal (divergence-free) driving and $b\sim1$ indicates compressive (curl-free) driving, with $b\sim1$ producing up to ten times higher star formation rates than $b\sim1/3$. The time variation of $b$ in our study allows us to infer that ionizing radiation is inherently a compressive turbulence driving source, with a time-averaged $b\sim 0.76 \pm 0.08$. We also investigate the value of $b$ of the pillars, where star formation is expected to occur, and find that the pillars are characterised by a natural mixture of both solenoidal and compressive turbulent modes ($b\sim0.4$) when they form, and later evolve into a more compressive turbulent state with $b\sim0.5$--$0.6$. A virial parameter analysis of the pillar regions supports this conclusion. This indicates that ionizing radiation from massive stars may be able to trigger star formation by producing predominately compressive turbulent gas in the pillars.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
All about baryons: revisiting SIDM predictions at small halo masses
Authors:
A. Bastidas Fry,
F. Governato,
A. Pontzen,
T. Quinn,
M. Tremmel,
L. Anderson,
H. Menon,
A. M. Brooks,
J. Wadsley
Abstract:
We use cosmological hydrodynamic simulations to consistently compare the assembly of dwarf galaxies in both $Λ$ dominated, Cold (CDM) and Self--Interacting (SIDM) dark matter models. The SIDM model adopts a constant cross section of 2 $cm^{2}/g$, a relatively large value to maximize its effects. These are the first SIDM simulations that are combined with a description of stellar feedback that natu…
▽ More
We use cosmological hydrodynamic simulations to consistently compare the assembly of dwarf galaxies in both $Λ$ dominated, Cold (CDM) and Self--Interacting (SIDM) dark matter models. The SIDM model adopts a constant cross section of 2 $cm^{2}/g$, a relatively large value to maximize its effects. These are the first SIDM simulations that are combined with a description of stellar feedback that naturally drives potential fluctuations able to create dark matter cores. Remarkably, SIDM fails to significantly lower the central dark matter density at halo peak velocities V$_{max}$ $<$ 30 Km/s. This is due to the fact that the central regions of very low--mass field halos have relatively low central velocity dispersion and densities, leading to time scales for SIDM collisions greater than a Hubble time. CDM halos with V$_{max}$ $<$ 30 km/s have inefficient star formation, and hence weak supernova feedback. At a fixed 2 cm2/g SIDM cross section, the DM content of very low mass CDM and SIDM halos differs by no more than a factor of two within 100-200pc. At larger halo masses ($\sim$ 10$^{10}$ solar masses), the introduction of baryonic processes creates field dwarf galaxies with dark matter cores and central DM$+$baryon distributions that are effectively indistinguishable between CDM and SIDM. Both models are in broad agreement with observed Local Group field galaxies across the range of masses explored. To significantly differentiate SIDM from CDM at the scale of faint dwarf galaxies, a velocity dependent cross section that rapidly increases to values larger than 2 $cm^{2}/g$ for halos with V$_{max}$ < 25-30 Km/s needs to be introduced.
△ Less
Submitted 16 June, 2015; v1 submitted 2 January, 2015;
originally announced January 2015.
-
Adaptive Techniques for Clustered N-Body Cosmological Simulations
Authors:
Harshitha Menon,
Lukasz Wesolowski,
Gengbin Zheng,
Pritish Jetley,
Laxmikant Kale,
Thomas Quinn,
Fabio Governato
Abstract:
ChaNGa is an N-body cosmology simulation application implemented using Charm++. In this paper, we present the parallel design of ChaNGa and address many challenges arising due to the high dynamic ranges of clustered datasets. We focus on optimizations based on adaptive techniques for scaling to more than 128K cores. We demonstrate strong scaling on up to 512K cores of Blue Waters evolving 12 and 2…
▽ More
ChaNGa is an N-body cosmology simulation application implemented using Charm++. In this paper, we present the parallel design of ChaNGa and address many challenges arising due to the high dynamic ranges of clustered datasets. We focus on optimizations based on adaptive techniques for scaling to more than 128K cores. We demonstrate strong scaling on up to 512K cores of Blue Waters evolving 12 and 24 billion particles. We also show strong scaling of highly clustered datasets on up to 128K cores.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.
-
The Irreducible String and an Infinity of Additional Constants of Motion in a Deposition-Evaporation Model on a Line
Authors:
M. K. Hari Menon,
Deepak Dhar
Abstract:
We study a model of stochastic deposition-evaporation with recombination, of three species of dimers on a line. This model is a generalization of the model recently introduced by Barma {\it et. al.} (1993 {\it Phys. Rev. Lett.} {\bf 70} 1033) to $q\ge 3$ states per site. It has an infinite number of constants of motion, in addition to the infinity of conservation laws of the original model which…
▽ More
We study a model of stochastic deposition-evaporation with recombination, of three species of dimers on a line. This model is a generalization of the model recently introduced by Barma {\it et. al.} (1993 {\it Phys. Rev. Lett.} {\bf 70} 1033) to $q\ge 3$ states per site. It has an infinite number of constants of motion, in addition to the infinity of conservation laws of the original model which are encoded as the conservation of the irreducible string. We determine the number of dynamically disconnected sectors and their sizes in this model exactly. Using the additional symmetry we construct a class of exact eigenvectors of the stochastic matrix. The autocorrelation function decays with different powers of $t$ in different sectors. We find that the spatial correlation function has an algebraic decay with exponent 3/2, in the sector corresponding to the initial state in which all sites are in the same state. The dynamical exponent is nontrivial in this sector, and we estimate it numerically by exact diagonalization of the stochastic matrix for small sizes. We find that in this case $z=2.39\pm0.05$.
△ Less
Submitted 13 May, 1995; v1 submitted 9 May, 1995;
originally announced May 1995.
-
Numerical Diagonalisation Study of the Trimer Deposition-Evaporation Model in One Dimension
Authors:
Peter B. Thomas,
M. K. Hari Menon,
Deepak Dhar
Abstract:
We study the model of deposition-evaporation of trimers on a line recently introduced by Barma, Grynberg and Stinchcombe. The stochastic matrix of the model can be written in the form of the Hamiltonian of a quantum spin-1/2 chain with three-spin couplings given by $ H= \sum\displaylimits_i [(1 - σ_i^-σ_{i+1}^-σ_{i+2}^-) σ_i^+σ_{i+1}^+σ_{i+2}^+ + h.c]$. We study by exact numerical diagonalizatio…
▽ More
We study the model of deposition-evaporation of trimers on a line recently introduced by Barma, Grynberg and Stinchcombe. The stochastic matrix of the model can be written in the form of the Hamiltonian of a quantum spin-1/2 chain with three-spin couplings given by $ H= \sum\displaylimits_i [(1 - σ_i^-σ_{i+1}^-σ_{i+2}^-) σ_i^+σ_{i+1}^+σ_{i+2}^+ + h.c]$. We study by exact numerical diagonalization of $H$ the variation of the gap in the eigenvalue spectrum with the system size for rings of size up to 30. For the sector corresponding to the initial condition in which all sites are empty, we find that the gap vanishes as $L^{-z}$ where the gap exponent $z$ is approximately $2.55\pm 0.15$. This model is equivalent to an interfacial roughening model where the dynamical variables at each site are matrices. From our estimate for the gap exponent we conclude that the model belongs to a new universality class, distinct from that studied by Kardar, Parisi and Zhang.
△ Less
Submitted 12 April, 1994;
originally announced April 1994.