-
Neural-network-supported basis optimizer for the configuration interaction problem in quantum many-body clusters: Feasibility study and numerical proof
Authors:
Pavlo Bilous,
Louis Thirion,
Henri Menke,
Maurits W. Haverkort,
Adriana Pálffy,
Philipp Hansmann
Abstract:
A deep-learning approach to optimize the selection of Slater determinants in configuration interaction calculations for condensed-matter quantum many-body systems is developed. We exemplify our algorithm on the discrete version of the single-impurity Anderson model with up to 299 bath sites. Employing a neural network classifier and active learning, our algorithm enhances computational efficiency…
▽ More
A deep-learning approach to optimize the selection of Slater determinants in configuration interaction calculations for condensed-matter quantum many-body systems is developed. We exemplify our algorithm on the discrete version of the single-impurity Anderson model with up to 299 bath sites. Employing a neural network classifier and active learning, our algorithm enhances computational efficiency by iteratively identifying the most relevant Slater determinants for the ground-state wavefunction. We benchmark our results against established methods and investigate the efficiency of our approach as compared to other basis truncation schemes. Our algorithm demonstrates a substantial improvement in the efficiency of determinant selection, yielding a more compact and computationally manageable basis without compromising accuracy. Given the straightforward application of our neural network-supported selection scheme to other model Hamiltonians of quantum many-body clusters, our algorithm can significantly advance selective configuration interaction calculations in the context of correlated condensed matter.
△ Less
Submitted 31 May, 2024;
originally announced June 2024.
-
Multi-scale flow, permeability, and heat transport in low-carbon and traditional building materials
Authors:
Hannah P. Menke,
Katherine M. Hood,
Kamaljit Singh,
Gabriela M. Medero,
Julien Maes
Abstract:
Permeability and heat transport through building materials ultimately dictates their insulatory performance over a buildings service lifetime. Experiments combining XCT with numerical modelling are an accepted method of studying pore scale processes and have been used extensively in the oil and gas industry to study highly complex reservoir rocks. However, despite the obvious similarities in struc…
▽ More
Permeability and heat transport through building materials ultimately dictates their insulatory performance over a buildings service lifetime. Experiments combining XCT with numerical modelling are an accepted method of studying pore scale processes and have been used extensively in the oil and gas industry to study highly complex reservoir rocks. However, despite the obvious similarities in structure and application, these techniques have not yet been widely adopted by the building and construction industry. An experimental investigation was performed on the pore structure of several building materials, including conventional, historic, and innovative, using XCT and direct numerical simulation. Six samples were imaged at between a 4 and 15 micron resolution inside a micro-CT scanner. The porosity and connectivity were extracted with the grain, throat, and pore size distributions using image analysis. The permeability, velocity, and thermal conductivity were then investigated using GeoChemFoam, our highly-versatile and open source numerical solver. It was found that each material had a unique, heterogeneous and sometimes multi-scale structure that had a large impact on the permeability and thermal conductivity. Furthermore, it was found that the method of including sub-resolution porosity directly effected these bulk property calculations for both parameters, especially in the materials with high structural heterogeneity. This is the first multi-scale study of structure, flow and heat transport on building materials and this workflow could easily be adapted to understand and improve designs in other industries that use porous materials such as fuel cells and batteries technology, lightweight materials and insulation, and semiconductors.
△ Less
Submitted 30 May, 2024;
originally announced May 2024.
-
Dispersivity calculation in digital twins of multiscale porous materials using the micro-continuum approach
Authors:
Julien Maes,
Hannah Menke
Abstract:
The micro-continuum method is a novel approach to simulate flow and transport in multiscale porous materials. For such materials, the domain can be divided into three sub-domains depending on the local porosity ε: fully resolved solid phase, for which ε=0, fully resolved pores, for which ε=1.0, and unresolved pores, for which 0<ε<1.0. For such domains, the flow can be solved using the Darcy-Brinkm…
▽ More
The micro-continuum method is a novel approach to simulate flow and transport in multiscale porous materials. For such materials, the domain can be divided into three sub-domains depending on the local porosity ε: fully resolved solid phase, for which ε=0, fully resolved pores, for which ε=1.0, and unresolved pores, for which 0<ε<1.0. For such domains, the flow can be solved using the Darcy-Brinkman-Stokes (DBS) equation, which offers a seamless transition between unresolved pores, where flow is described by Darcy's law, and resolved pores, where flow is described by the Navier-Stokes equations. Species transport can then be modelled using a volume-averaged equation. In this work, we present a derivation of the closure problem for the micro-continuum approach. Effective dispersivity tensors can then be calculated through a multi-stage process. First, high resolution images are chosen for characterizing the structure of the unresolved pores. Porosity, permeability and effective dispersivity for the unresolved part are calculated by solving a closure problem based on Direct Numerical Simulation (DNS) in the high-resolution images. The effective dispersivity is then expressed as a function of the Péclet number, which describes the ratio of advective to diffusive transport. This relationship, along with porosity and permeability, is then integrated into the multiscale domain and the effective dispersivity tensor for the full image is calculated. Our novel method is validated by comparison with the numerical solution obtained for a fully-resolved simulation in a multiscale 2D micromodel. It is then applied to obtain an effective dispersivity model in digital twins for two multiscale materials: hierarchical ceramic foams and microporous carbonate rocks.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Superconductivity and Mottness in Organic Charge Transfer Materials
Authors:
Henri Menke,
Marcel Klett,
Kazushi Kanoda,
Antoine Georges,
Michel Ferrero,
Thomas Schäfer
Abstract:
The phase diagrams of quasi two-dimensional organic superconductors display a plethora of fundamental phenomena associated with strong electron correlations, such as unconventional superconductivity, metal-insulator transitions, frustrated magnetism and spin liquid behavior. We analyze a minimal model for these compounds, the Hubbard model on an anisotropic triangular lattice, using cutting-edge q…
▽ More
The phase diagrams of quasi two-dimensional organic superconductors display a plethora of fundamental phenomena associated with strong electron correlations, such as unconventional superconductivity, metal-insulator transitions, frustrated magnetism and spin liquid behavior. We analyze a minimal model for these compounds, the Hubbard model on an anisotropic triangular lattice, using cutting-edge quantum embedding methods respecting the lattice symmetry. We demonstrate the existence of unconventional superconductivity by directly entering the symmetry-broken phase. We show that the crossover from the Fermi liquid metal to the Mott insulator is associated with the formation of a pseudogap. The predicted momentum-selective destruction of the Fermi surface into hot and cold regions provides motivation for further spectroscopic studies. Our results are in remarkable agreement with experimental phase diagrams of $κ$-BEDT organics.
△ Less
Submitted 27 February, 2024; v1 submitted 19 January, 2024;
originally announced January 2024.
-
Single- and two-particle observables in the Emery model: a dynamical mean-field perspective
Authors:
Yi-Ting Tseng,
M. O. Malcolms,
Henri Menke,
Marcel Klett,
Thomas Schäfer,
P. Hansmann
Abstract:
We compare the dynamical mean-field descriptions of the single-band Hubbard model and the three-band Emery model at the one- and two-particle level for parameters relevant to high-Tc superconductors. We show that even within dynamical mean-field theory, accounting solely for temporal fluctuations, the intrinsic multi-orbital nature of the Emery model introduces effective non-local correlations. Th…
▽ More
We compare the dynamical mean-field descriptions of the single-band Hubbard model and the three-band Emery model at the one- and two-particle level for parameters relevant to high-Tc superconductors. We show that even within dynamical mean-field theory, accounting solely for temporal fluctuations, the intrinsic multi-orbital nature of the Emery model introduces effective non-local correlations. These lead to a non-Curie-like temperature-dependence of the magnetic susceptibility, also seen in nuclear magnetic resonance experiments in the pseudogap regime by M. Avramovska, et al. [Journal of Superconductivity and Novel Magnetism 33, 2621 (2020)]. We demonstrate the agreement of our results with these experiments for a large range of do**s and trace back the effective non-local correlations to an emerging oxygen-copper singlet by analyzing a minimal finite-size cluster model. Despite this correct description of the hallmark of the pseudogap at the two-particle level, i.e., the drop in the Knight shift of nuclear magnetic resonance, dynamical mean-field theory fails to properly describe the spectral properties of the pseudogap.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
Mott transition and pseudogap of the square-lattice Hubbard model: results from center-focused cellular dynamical mean-field theory
Authors:
Michael Meixner,
Henri Menke,
Marcel Klett,
Sarah Heinzelmann,
Sabine Andergassen,
Philipp Hansmann,
Thomas Schäfer
Abstract:
The recently proposed center-focused post-processing procedure [Phys. Rev. Research 2, 033476 (2020)] of cellular dynamical mean-field theory suggests that central sites of large impurity clusters are closer to the exact solution of the Hubbard model than the edge sites. In this paper, we systematically investigate results in the spirit of this center-focused scheme for several cluster sizes up to…
▽ More
The recently proposed center-focused post-processing procedure [Phys. Rev. Research 2, 033476 (2020)] of cellular dynamical mean-field theory suggests that central sites of large impurity clusters are closer to the exact solution of the Hubbard model than the edge sites. In this paper, we systematically investigate results in the spirit of this center-focused scheme for several cluster sizes up to $8\times 8$ in and out of particle-hole symmetry. First we analyze the metal-insulator crossovers and transitions of the half-filled Hubbard model on a simple square lattice. We find that the critical interaction of the crossover is reduced with increasing cluster sizes and the critical temperature abruptly drops for the $4\times 4$ cluster. Second, for this cluster size, we apply the center-focused scheme to a system with more realistic tight-binding parameters, investigating its pseudogap regime as a function of temperature and do**, where we find do** dependent metal-insulator crossovers, Lifshitz transitions and a strongly renormalized Fermi-liquid regime. Additionally to diagnosing the real space origin of the suppressed antinodal spectral weight in the pseudogap regime, we can infer hints towards underlying charge ordering tendencies.
△ Less
Submitted 15 January, 2024; v1 submitted 26 October, 2023;
originally announced October 2023.
-
Subsurface hydrogen storage controlled by small-scale rock heterogeneities
Authors:
Zaid Jangda,
Hannah Menke,
Andreas Busch,
Sebastian Geiger,
Tom Bultreys,
Kamaljit Singh
Abstract:
Subsurface porous rocks have the potential to store large volumes of hydrogen (H$_2$) required for transitioning towards a H$_2$-based energy future. Understanding the flow and trap** behavior of H$_2$ in subsurface storage systems, which is influenced by pore-scale heterogeneities inherent to subsurface rocks, is crucial to reliably evaluate the storage efficiency of a geological formation. In…
▽ More
Subsurface porous rocks have the potential to store large volumes of hydrogen (H$_2$) required for transitioning towards a H$_2$-based energy future. Understanding the flow and trap** behavior of H$_2$ in subsurface storage systems, which is influenced by pore-scale heterogeneities inherent to subsurface rocks, is crucial to reliably evaluate the storage efficiency of a geological formation. In this work, we performed 3D X-ray imaging and flow experiments to investigate the impact of pore-scale heterogeneity on H$_2$ distribution after its cyclic injection (drainage) and withdrawal (imbibition) from a layered rock sample, characterized by varying pore and throat sizes. Our findings reveal that even subtle variations in rock structure and properties significantly influence H$_2$ displacement and storage efficiency. During drainage, H$_2$ follows a path consisting of large pores and throats, bypassing the majority of the low permeability rock layer consisting of smaller pores and throats. This bypassing substantially reduces the H$_2$ storage capacity. Moreover, due to the varying pore and throat sizes in the layered sample, depending on the experimental flow strategy, we observe a higher H$_2$ saturation after imbibition compared to drainage, which is counterintuitive and opposite to that observed in homogeneous rocks. These findings emphasize that small-scale rock heterogeneity, which is often unaccounted for in reservoir-scale models, can play a vital role in the displacement and trap** of H$_2$ in subsurface porous media.
△ Less
Submitted 13 October, 2023; v1 submitted 8 October, 2023;
originally announced October 2023.
-
Local Padding in Patch-Based GANs for Seamless Infinite-Sized Texture Synthesis
Authors:
Alhasan Abdellatif,
Ahmed H. Elsheikh,
Hannah Menke
Abstract:
Texture models based on Generative Adversarial Networks (GANs) use zero-padding to implicitly encode positional information of the image features. However, when extending the spatial input to generate images at large sizes, zero-padding can often lead to degradation of quality due to the incorrect positional information at the center of the image and limit the diversity within the generated images…
▽ More
Texture models based on Generative Adversarial Networks (GANs) use zero-padding to implicitly encode positional information of the image features. However, when extending the spatial input to generate images at large sizes, zero-padding can often lead to degradation of quality due to the incorrect positional information at the center of the image and limit the diversity within the generated images. In this paper, we propose a novel approach for generating stochastic texture images at large arbitrary sizes using GANs model that is based on patch-by-patch generation. Instead of zero-padding, the model uses \textit{local padding} in the generator that shares border features between the generated patches; providing positional context and ensuring consistency at the boundaries. The proposed models are trainable on a single texture image and have a constant GPU scalability with respect to the output image size, and hence can generate images of infinite sizes. We show in the experiments that our method has a significant advancement beyond existing texture models in terms of the quality and diversity of the generated textures. Furthermore, the implementation of local padding in the state-of-the-art super-resolution models effectively eliminates tiling artifacts enabling large-scale super-resolution. Our code is available at \url{https://github.com/ai4netzero/Infinite_Texture_GANs
△ Less
Submitted 14 May, 2024; v1 submitted 5 September, 2023;
originally announced September 2023.
-
Experimental investigation of solubility trap** in 3D printed micromodels
Authors:
Alexandros Patsoukis Dimou,
Mahdi Mansouri Moroujeni,
Sophie Roman,
Hannah P. Menke,
Julien Maes
Abstract:
Understanding interfacial mass transfer during dissolution of gas in a liquid is vital for optimising large-scale carbon capture and storage operations. While the dissolution of CO2 bubbles in reservoir brine is a crucial mechanism towards safe CO2 storage, it is a process that occurs at the pore-scale and is not yet fully understood. Direct numerical simulation (DNS) models describing this type o…
▽ More
Understanding interfacial mass transfer during dissolution of gas in a liquid is vital for optimising large-scale carbon capture and storage operations. While the dissolution of CO2 bubbles in reservoir brine is a crucial mechanism towards safe CO2 storage, it is a process that occurs at the pore-scale and is not yet fully understood. Direct numerical simulation (DNS) models describing this type of dissolution exist and have been validated with semi-analytical models on simple cases like a rising bubble in a liquid column. However, DNS models have not been experimentally validated for more complicated scenarios such as dissolution of trapped CO2 bubbles in pore geometries where there are few experimental datasets. In this work we present an experimental and numerical study of trap** and dissolution of CO2 bubbles in 3D printed micromodel geometries. We use 3D printing technology to generate three different geometries, a single cavity geometry, a triple cavity geometry and a multiple channel geometry. In order to investigate the repeatability of the trap** and dissolution experimental results, each geometry is printed three times and three identical experiments are performed for each geometry. The experiments are performed at low capillary number representative of flow during CO2 storage applications. DNS simulations are then performed and compared with the experimental results. Our results show experimental reproducibility and consistency in terms of CO2 trap** and the CO2 dissolution process. At such low capillary number, our numerical simulator cannot model the process accurately due to parasitic currents and the strong time step constraints associated with capillary waves. However, we show that, for the single and triple cavity geometry.
△ Less
Submitted 22 June, 2023;
originally announced June 2023.
-
Channeling: a new class of dissolution in complex porous media
Authors:
Hannah P. Menke,
Julien Maes,
Sebastian Geiger
Abstract:
The current conceptual model of mineral dissolution in porous media is comprised of three dissolution patterns (wormhole, compact, and uniform) - or regimes - that develop depending on the relative dominance of flow, diffusion, and reaction rate. Here, we examine the evolution of pore structure during acid injection using numerical simulations on two porous media structures of increasing complexit…
▽ More
The current conceptual model of mineral dissolution in porous media is comprised of three dissolution patterns (wormhole, compact, and uniform) - or regimes - that develop depending on the relative dominance of flow, diffusion, and reaction rate. Here, we examine the evolution of pore structure during acid injection using numerical simulations on two porous media structures of increasing complexity. We examine the boundaries between regimes and characterise the existence of a fourth regime called channeling, where already existing fast flow pathways are preferentially widened by dissolution. Channeling occurs in cases where the distribution in pore throat size results in orders of magnitude differences in flow rate for different flow pathways. This focusing of dissolution along only dominant flow paths induces an immediate, large change in permeability with a comparatively small change in porosity, resulting in a porosity-permeability relationship unlike any that has been previously seen. This work demonstrates that our current conceptual model of dissolution regimes must be modified to include channeling for accurate predictions of dissolution in applications such as geologic carbon storage and geothermal energy production.
△ Less
Submitted 17 March, 2023; v1 submitted 7 November, 2022;
originally announced November 2022.
-
Pore-Scale Visualization of Hydrogen Storage in a Sandstone at Subsurface Pressure and Temperature Conditions: Trap**, Dissolution and Wettability
Authors:
Zaid Jangda,
Hannah Menke,
Andreas Busch,
Sebastian Geiger,
Tom Bultreys,
Helen Lewis,
Kamaljit Singh
Abstract:
The global commitment to achieve net-zero has led to increasing investment towards the production and usage of green hydrogen (H2).However, the massive quantity needed to match future demand will require new storage facilities. Underground storage of H2 is a potentially viable solution, but poses unique challenges due to the distinctive physical and chemical properties of H2, that have yet to be s…
▽ More
The global commitment to achieve net-zero has led to increasing investment towards the production and usage of green hydrogen (H2).However, the massive quantity needed to match future demand will require new storage facilities. Underground storage of H2 is a potentially viable solution, but poses unique challenges due to the distinctive physical and chemical properties of H2, that have yet to be studied quantitatively in the subsurface environment. We have performed in situ X-ray flow experiments to investigate the fundamentals of pore-scale fluid displacement processes during H2 injection into an initially brine saturated Bentheimer sandstone sample. Two different injection schemes were followed, the displacement of H2 with H2-equilibrated brine and non-H2-equilibrated brine both at temperature and pressure conditions representative of deep underground reservoirs. H2 was found to be non-wetting to brine after both displacement cycles, with average contact angles between 53.72 and 52.72, respectively. We also found a higher recovery of H2 (43.1%) for non-H2-equilibrated brine compared to that of H2-equilibrated brine (31.6%), indicating potential dissolution of H2 in unequilibrated brine at reservoir conditions. Our results suggest that H2 storage may indeed be a suitable strategy for energy storage, but considerable further research is needed to fully comprehend the pore-scale interactions at reservoir conditions.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
Improved Volume-of-Solid formulations for micro-continuum simulation of mineral dissolution at the pore-scale
Authors:
Julien Maes,
Cyprien Soulaine,
Hannah P. Menke
Abstract:
We present two novel Volume-of-Solid (VoS) formulations for micro-continuum simulation of mineral dissolution at the pore-scale. The traditional VoS formulation (VoS-psi) uses a diffuse interface localization function psi to ensure stability and limit diffusion of the reactive surface. The main limitation of this formulation is that accuracy is strongly dependent on the choice of the localization…
▽ More
We present two novel Volume-of-Solid (VoS) formulations for micro-continuum simulation of mineral dissolution at the pore-scale. The traditional VoS formulation (VoS-psi) uses a diffuse interface localization function psi to ensure stability and limit diffusion of the reactive surface. The main limitation of this formulation is that accuracy is strongly dependent on the choice of the localization function. Our first novel improved formulation (iVoS) uses the divergence of a reactive flux to localize the reaction at the fluid-solid interface, so no localization function is required. Our second novel formulation (VoS-psi') uses a localization function with a parameter that is fitted to ensure that the reactive surface area is conserved globally. Both novel methods are validated by comparison with experiments, numerical simulations using an interface tracking method based on the Arbitrary Eulerian Lagrangian (ALE) framework, and numerical simulations using the VoS-psi. All numerical methods are implemented in GeoChemFoam, our reactive transport toolbox and three benchmark test cases in both synthetic and real pore geometries are considered: (1) dissolution of a calcite post by acid injection in a microchannel and experimental comparison, (2) dissolution in a 2D polydisperse disc micromodel at different dissolution regimes and (3) dissolution in a Ketton carbonate rock sample and comparison to \textit{in-situ} micro-CT experiments. We find that the iVoS results match accurately experimental results and simulation results obtained with the ALE method, while the VoS-psi method leads to inaccuracies that are mostly corrected by the VoS-psi' formulation. In addition, the VoS methods are significantly faster than the ALE method, with a speed-up factor of between 2 and 12.
△ Less
Submitted 14 April, 2022;
originally announced April 2022.
-
GeoChemFoam: Direct Modelling of flow and heat transfer in micro-CT images of porous media
Authors:
Julien Maes,
Hannah P. Menke
Abstract:
GeoChemFoam is an open-source OpenFOAM-based numerical modelling toolbox that includes a range of custom packages to solve complex flow processes including multiphase transport with interface transfer, single-phase flow in multiscale porous media, and reactive transport with mineral dissolution. In this paper, we present GeoChemFoam's novel numerical model for simulation of conjugate heat transfer…
▽ More
GeoChemFoam is an open-source OpenFOAM-based numerical modelling toolbox that includes a range of custom packages to solve complex flow processes including multiphase transport with interface transfer, single-phase flow in multiscale porous media, and reactive transport with mineral dissolution. In this paper, we present GeoChemFoam's novel numerical model for simulation of conjugate heat transfer in micro-CT images of porous media. GeoChemFoam uses the micro-continuum approach to describe the fluid-solid interface using the volume fraction of fluid and solid in each computational cell. The velocity field is solved using Brinkman's equation with permeability calculated using the Kozeny-Carman equation which results in a near-zero permeability in the solid phase. Conjugate heat transfer is then solved with heat convection where the velocity is non-zero, and the thermal conductivity is calculated as the harmonic average of phase conductivity weighted by the phase volume fraction. Our model is validated by comparison with the standard two-medium approach for a simple 2D geometry. We then simulate conjugate heat transfer and calculate heat transfer coefficients for different flow regimes and injected fluid analogous to injection into a geothermal reservoir in a micro-CT image of Bentheimer sandstone and perform a sensitivity analysis in a porous heat exchanger with a random sphere packing.
△ Less
Submitted 7 October, 2021;
originally announced October 2021.
-
GeoChemFoam: Operator Splitting based time-step** for efficient Volume-Of-Fluid simulation of capillary-dominated two-phase flow
Authors:
Julien Maes,
Hannah P. Menke
Abstract:
We present a novel time-step** method, called Operator Splitting with Capillary Relaxation (OSCAR), for efficient Volume-Of-Fluid simulations of capillary-dominated two-phase flow. OSCAR uses operator splitting methods to separate the viscous drag and the surface tension forces. Different time-steps are used for the viscous drag steps, controlled by the injection velocity, and for the capillary…
▽ More
We present a novel time-step** method, called Operator Splitting with Capillary Relaxation (OSCAR), for efficient Volume-Of-Fluid simulations of capillary-dominated two-phase flow. OSCAR uses operator splitting methods to separate the viscous drag and the surface tension forces. Different time-steps are used for the viscous drag steps, controlled by the injection velocity, and for the capillary relaxation steps, controlled by the velocity of capillary waves. Although OSCAR induces an additional numerical error of order 0 in time resulting from the splitting, it is well suited for simulations at low capillary number. First, the splitting error decreases with the capillary number and at low capillary number, the relaxation steps converge before reaching their last iteration, resulting in a large speed-up (here up to 250x) compared to standard time-step** methods. The method is implemented in GeoChemFoam, our OpenFOAM-based CFD solver. Convergence, accuracy and efficiency are demonstrated on three benchmark cases: (1) the steady motion of an air bubble in a straight 2D microchannel, (2) injection of supercritical CO2 in a 3D constricted channel leading to a snap-off, and (3) water drainage in a 2D oil-wet micromodel representing a porous media.
△ Less
Submitted 21 May, 2021;
originally announced May 2021.
-
Benchmarking the viability of 3D printed micromodels for single phase flow using Particle Image Velocimetry and Direct Numerical Simulations
Authors:
Alexandros Patsoukis Dimou,
Hannah P. Menke,
Julien Maes
Abstract:
Holistic understanding of multiphase reactive flow mechanisms such as CO$_2$ dissolution, multiphase displacement, and snap-off events are vital for optimisation of large-scale industrial operations like CO$_2$ sequestration, enhanced oil recovery, and geothermal energy. Recent advances in three-dimensional (3D) printing allow for cheap and fast manufacturing of complex porosity models, which enab…
▽ More
Holistic understanding of multiphase reactive flow mechanisms such as CO$_2$ dissolution, multiphase displacement, and snap-off events are vital for optimisation of large-scale industrial operations like CO$_2$ sequestration, enhanced oil recovery, and geothermal energy. Recent advances in three-dimensional (3D) printing allow for cheap and fast manufacturing of complex porosity models, which enable investigation of specific flow processes in a repeatable manner as well as sensitivity analysis for small geometry alterations. However, there are concerns regarding dimensional fidelity, shape conformity and surface quality, and therefore the printing quality and printer limitations must be benchmarked. We present an experimental investigation into the ability of 3D printing to generate custom-designed micromodels accurately and repeatably down to a minimum pore throat size of 140 micrometers, which is representative of the average pore-throat size in coarse sandstones. Homogeneous and heterogeneous micromodel geometries are designed, then the 3D printing process is optimised to achieve repeatable experiments with single-phase fluid flow. Finally, Particle Image Velocimetry is used to compare the velocity map obtained from flow experiments in 3D printed micromodels with the map generated with direct numerical simulation (OpenFOAM software) and an accurate match is obtained. This work indicates that 3D printed micromodels can be used to accurately investigate pore-scale processes present in CO$_2$ sequestration, enhanced oil recovery and geothermal energy applications more cheapely than traditional micromodel methods.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
GeoChemFoam: Direct modelling of multiphase reactive transport in real pore geometries with equilibrium reactions
Authors:
Julien Maes,
Hannah P. Menke
Abstract:
We present the novel numerical model GeoChemFoam, a multiphase reactive transport solver for simulations on complex pore geometries, including microfluidic devices and micro-CT images. The geochemical model includes bulk and surface equilibrium reactions. Multiphase flow is solved using the Volume-Of-Fluid method and the transport of species is solved using the Continuous Species Transfer method.…
▽ More
We present the novel numerical model GeoChemFoam, a multiphase reactive transport solver for simulations on complex pore geometries, including microfluidic devices and micro-CT images. The geochemical model includes bulk and surface equilibrium reactions. Multiphase flow is solved using the Volume-Of-Fluid method and the transport of species is solved using the Continuous Species Transfer method. The reactive transport equations are solved using a sequential Operator Splitting method, with the transport step solved using our OpenFOAM-based Computational Fluid Dynamics toolbox, and the reaction step solved using Phreeqc, the US geological survey's geochemical solver. The model is validated by comparison with analytical solutions in 1D and 2D geometries. We then applied the model to simulate multiphase reactive transport in two test pore geometries: a 3D pore cavity and a 3D micro-CT image of Bentheimer sandstone. In each case, we show the pore-scale simulation results can be used to develop upscaled models that are significantly more accurate than standard macro-scale equilibrium models.
△ Less
Submitted 5 March, 2021;
originally announced March 2021.
-
A superlattice approach to do** infinite-layer nickelates
Authors:
R. A. Ortiz,
H. Menke,
F. Misják,
D. T. Mantadakis,
K. Fürsich,
E. Schierle,
G. Logvenov,
U. Kaiser,
B. Keimer,
P. Hansmann,
E. Benckiser
Abstract:
The recent observation of superconductivity in infinite-layer Nd$_{1-x}$Sr$_x$NiO$_2$ thin films has attracted a lot of attention, since this compound is electronically and structurally analogous to the superconducting cuprates. Due to the challenges in the phase stabilization upon chemical do** with Sr, we synthesized artificial superlattices of LaNiO$_3$ embedded in insulating LaGaO$_3$, and u…
▽ More
The recent observation of superconductivity in infinite-layer Nd$_{1-x}$Sr$_x$NiO$_2$ thin films has attracted a lot of attention, since this compound is electronically and structurally analogous to the superconducting cuprates. Due to the challenges in the phase stabilization upon chemical do** with Sr, we synthesized artificial superlattices of LaNiO$_3$ embedded in insulating LaGaO$_3$, and used layer-selective topotactic reactions to reduce the nickelate layers to LaNiO$_{2}$. Hole do** is achieved via interfacial oxygen atoms and tuned via the layer thickness. We used electrical transport measurements, transmission electron microscopy, and x-ray spectroscopy together with ab initio calculations to track changes in the local nickel electronic configuration upon reduction and found that these changes are reversible. Our experimental and theoretical data indicate that the doped holes are trapped at the interfacial quadratic pyramidal Ni sites. Calculations for electron-doped cases predict a different behavior, with evenly distributed electrons among the layers, thus opening up interesting perspectives for interfacial do** of transition metal oxides.
△ Less
Submitted 16 June, 2021; v1 submitted 10 February, 2021;
originally announced February 2021.
-
Upscaling the porosity-permeability relationship of a microporous carbonate to the Darcy scale with machine learning
Authors:
Hannah P. Menke,
Julien Maes,
Sebastian Geiger
Abstract:
The permeability of a pore structure is typically described by stochastic representations of its geometrical attributes. Database-driven numerical solvers for large model domains can only accurately predict large-scale flow behaviour when they incorporate upscaled descriptions of that structure. The upscaling is particularly challenging for rocks with multimodal porosity structures such as carbona…
▽ More
The permeability of a pore structure is typically described by stochastic representations of its geometrical attributes. Database-driven numerical solvers for large model domains can only accurately predict large-scale flow behaviour when they incorporate upscaled descriptions of that structure. The upscaling is particularly challenging for rocks with multimodal porosity structures such as carbonates, where several different types of structures are interacting. It is the connectivity both within and between these different structures that controls the porosity-permeability relationship at the larger length scales. Recent advances in machine learning combined with numerical modelling and structural analysis have allowed us to probe the relationship between structure and permeability more deeply. We have used this integrated approach to tackle the challenge of upscaling multimodal and multiscale porous media. We present a novel method for upscaling multimodal porosity-permeability relationships using machine learning based multivariate structural regression. A m-CT image of limestone was divided into sub-volumes and permeability was computed using the DBS model. The porosity-permeability relationship from Menke et al. was used to assign permeability values to the microporosity. Structural attributes of each sub-volume were extracted and then regressed against the solved permeability using an Extra-Trees regression model to derive an upscaled porosity-permeability relationship. Ten upscaled test cases were then modelled at the Darcy scale using the regression and benchmarked against full DBS simulations, a numerically upscaled Darcy model, and a K-C fit. We found good agreement between the full DBS simulations and both the numerical and machine learning upscaled models while the K-C model was a poor predictor in all cases.
△ Less
Submitted 23 September, 2020;
originally announced October 2020.
-
Stabilizing Even-Parity Chiral Superconductivity in Sr$_2$RuO$_4$
Authors:
Han Gyeol Suh,
Henri Menke,
P. M. R. Brydon,
Carsten Timm,
Aline Ramires,
Daniel F. Agterberg
Abstract:
Strontium ruthenate (Sr$_2$RuO$_4$) has long been thought to host a spin-triplet chiral $p$-wave superconducting state. However, the singletlike response observed in recent spin-susceptibility measurements casts serious doubts on this pairing state. Together with the evidence for broken time-reversal symmetry and a jump in the shear modulus $c_{66}$ at the superconducting transition temperature, t…
▽ More
Strontium ruthenate (Sr$_2$RuO$_4$) has long been thought to host a spin-triplet chiral $p$-wave superconducting state. However, the singletlike response observed in recent spin-susceptibility measurements casts serious doubts on this pairing state. Together with the evidence for broken time-reversal symmetry and a jump in the shear modulus $c_{66}$ at the superconducting transition temperature, the available experiments point towards an even-parity chiral superconductor with $k_z(k_x\pm ik_y)$-like $E_g$ symmetry, which has consistently been dismissed based on the quasi-two-dimensional electronic structure of Sr$_2$RuO$_4$. Here, we show how the orbital degree of freedom can encode the two-component nature of the $E_g$ order parameter, allowing for a local orbital-antisymmetric spin-triplet state that can be stabilized by on-site Hund's coupling. We find that this exotic $E_g$ state can be energetically stable once a complete, realistic three-dimensional model is considered, within which momentum-dependent spin-orbit coupling terms are key. This state naturally gives rise to Bogoliubov Fermi surfaces.
△ Less
Submitted 21 July, 2020; v1 submitted 19 December, 2019;
originally announced December 2019.
-
Bogoliubov Fermi surfaces stabilized by spin-orbit coupling
Authors:
Henri Menke,
C. Timm,
P. M. R. Brydon
Abstract:
It was recently understood that centrosymmetric multiband superconductors that break time-reversal symmetry generically show Fermi surfaces of Bogoliubov quasiparticles. We investigate the thermodynamic stability of these Bogoliubov Fermi surfaces in a paradigmatic model. To that end, we construct the mean-field phase diagram as a function of spin-orbit coupling and temperature. It confirms the pr…
▽ More
It was recently understood that centrosymmetric multiband superconductors that break time-reversal symmetry generically show Fermi surfaces of Bogoliubov quasiparticles. We investigate the thermodynamic stability of these Bogoliubov Fermi surfaces in a paradigmatic model. To that end, we construct the mean-field phase diagram as a function of spin-orbit coupling and temperature. It confirms the prediction that a pairing state with Bogoliubov Fermi surfaces can be stabilized at moderate spin-orbit coupling strengths. The multiband nature of the model also gives rise to a first-order phase transition, which can be explained by the competition of intra- and interband pairing and is strongly affected by cubic anisotropy. For the state with Bogoliubov Fermi surfaces, we also discuss experimental signatures in terms of the residual density of states and the induced magnetic order. Our results show that Bogoliubov Fermi surfaces of experimentally relevant size can be thermodynamically stable.
△ Less
Submitted 8 December, 2019; v1 submitted 24 September, 2019;
originally announced September 2019.
-
ESPResSo 4.0 -- An Extensible Software Package for Simulating Soft Matter Systems
Authors:
Florian Weik,
Rudolf Weeber,
Kai Szuttor,
Konrad Breitsprecher,
Joost de Graaf,
Michael Kuron,
Jonas Landsgesell,
Henri Menke,
David Sean,
Christian Holm
Abstract:
ESPResSo 4.0 is an extensible simulation package for research on soft matter. This versatile molecular dynamics program was originally developed for coarse-grained simulations of charged systems Limbach et al., Comput. Phys. Commun. 174, 704 (2006). The scope of the software has since broadened considerably: ESPResSo can now be used to simulate systems with length scales spanning from the molecula…
▽ More
ESPResSo 4.0 is an extensible simulation package for research on soft matter. This versatile molecular dynamics program was originally developed for coarse-grained simulations of charged systems Limbach et al., Comput. Phys. Commun. 174, 704 (2006). The scope of the software has since broadened considerably: ESPResSo can now be used to simulate systems with length scales spanning from the molecular to the colloidal. Examples include, self-propelled particles in active matter, membranes in biological systems, and the aggregation of soot particles in process engineering. ESPResSo also includes solvers for hydrodynamic and electrokinetic problems, both on the continuum and on the explicit particle level. Since our last description of version 3.1 Arnold et al., Meshfree Methods for Partial Differential Equations VI, Lect. Notes Comput. Sci. Eng. 89, 1 (2013), the software has undergone considerable restructuring. The biggest change is the replacement of the Tcl scripting interface with a much more powerful Python interface. In addition, many new simulation methods have been implemented. In this article, we highlight the changes and improvements made to the interface and code, as well as the new simulation techniques that enable a user of ESPResSo 4.0 to simulate physics that is at the forefront of soft matter research.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Bogoliubov Fermi surfaces: General theory, magnetic order, and topology
Authors:
P. M. R. Brydon,
D. F. Agterberg,
Henri Menke,
C. Timm
Abstract:
We present a comprehensive theory for Bogoliubov Fermi surfaces in inversion-symmetric superconductors which break time-reversal symmetry. A requirement for such a gap structure is that the electrons posses internal degrees of freedom apart from the spin (e.g., orbital or sublattice indices), which permits a nontrivial internal structure of the Cooper pairs. We develop a general theory for such a…
▽ More
We present a comprehensive theory for Bogoliubov Fermi surfaces in inversion-symmetric superconductors which break time-reversal symmetry. A requirement for such a gap structure is that the electrons posses internal degrees of freedom apart from the spin (e.g., orbital or sublattice indices), which permits a nontrivial internal structure of the Cooper pairs. We develop a general theory for such a pairing state, which we show to be nonunitary. A time-reversal-odd component of the nonunitary gap product is found to be essential for the appearance of Bogoliubov Fermi surfaces. These Fermi surfaces are topologically protected by a $\mathbb{Z}_2$ invariant. We examine their appearance in a generic low-energy effective model and then study two specific microscopic models supporting Bogoliubov Fermi surfaces: a cubic material with a $j=3/2$ total-angular-momentum degree of freedom and a hexagonal material with distinct orbital and spin degrees of freedom. The appearance of Bogoliubov Fermi surfaces is accompanied by a magnetization of the low-energy states, which we connect to the time-reversal-odd component of the gap product. We additionally calculate the surface spectra associated with these pairing states and demonstrate that the Bogoliubov Fermi surfaces are characterized by additional topological indices. Finally, we discuss the extension of phenomenological theories of superconductors to include Bogoliubov Fermi surfaces, and identify the time-reversal-odd part of the gap product as a composite order parameter which is intertwined with superconductivity.
△ Less
Submitted 10 June, 2018;
originally announced June 2018.
-
Topological quantum wires with balanced gain and loss
Authors:
Henri Menke,
Moritz M. Hirschmann
Abstract:
We study a one-dimensional topological superconductor, the Kitaev chain, under the influence of a non-Hermitian but $\mathcal{PT}$-symmetric potential. This potential introduces gain and loss in the system in equal parts. We show that the stability of the topological phase is influenced by the gain/loss strength and explicitly derive the bulk topological invariant in a bipartite lattice as well as…
▽ More
We study a one-dimensional topological superconductor, the Kitaev chain, under the influence of a non-Hermitian but $\mathcal{PT}$-symmetric potential. This potential introduces gain and loss in the system in equal parts. We show that the stability of the topological phase is influenced by the gain/loss strength and explicitly derive the bulk topological invariant in a bipartite lattice as well as compute the corresponding phase diagram using analytical and numerical methods. Furthermore we find that the edge state is exponentially localized near the ends of the wire despite the presence of gain and loss of probability amplitude in that region.
△ Less
Submitted 11 May, 2017; v1 submitted 31 January, 2017;
originally announced January 2017.
-
Tutorial: Calculation of Rydberg interaction potentials
Authors:
Sebastian Weber,
Christoph Tresp,
Henri Menke,
Alban Urvoy,
Ofer Firstenberg,
Hans Peter Büchler,
Sebastian Hofferberth
Abstract:
The strong interaction between individual Rydberg atoms provides a powerful tool exploited in an ever-growing range of applications in quantum information science, quantum simulation, and ultracold chemistry. One hallmark of the Rydberg interaction is that both its strength and angular dependence can be fine-tuned with great flexibility by choosing appropriate Rydberg states and applying external…
▽ More
The strong interaction between individual Rydberg atoms provides a powerful tool exploited in an ever-growing range of applications in quantum information science, quantum simulation, and ultracold chemistry. One hallmark of the Rydberg interaction is that both its strength and angular dependence can be fine-tuned with great flexibility by choosing appropriate Rydberg states and applying external electric and magnetic fields. More and more experiments are probing this interaction at short atomic distances or with such high precision that perturbative calculations as well as restrictions to the leading dipole-dipole interaction term are no longer sufficient. In this tutorial, we review all relevant aspects of the full calculation of Rydberg interaction potentials. We discuss the derivation of the interaction Hamiltonian from the electrostatic multipole expansion, numerical and analytical methods for calculating the required electric multipole moments, and the inclusion of electromagnetic fields with arbitrary direction. We focus specifically on symmetry arguments and selection rules, which greatly reduce the size of the Hamiltonian matrix, enabling the direct diagonalization of the Hamiltonian up to higher multipole orders on a desktop computer. Finally, we present example calculations showing the relevance of the full interaction calculation to current experiments. Our software for calculating Rydberg potentials including all features discussed in this tutorial is available as open source.
△ Less
Submitted 6 June, 2017; v1 submitted 23 December, 2016;
originally announced December 2016.
-
Understanding the Onset of Oscillatory Swimming in Microchannels
Authors:
Joost de Graaf,
Arnold J. T. M. Mathijssen,
Marc Fabritius,
Henri Menke,
Christian Holm,
Tyler N. Shendruk
Abstract:
Self-propelled colloids (swimmers) in confining geometries follow trajectories determined by hydrodynamic interactions with the bounding surfaces. However, typically these interactions are ignored or truncated to lowest order. We demonstrate that higher-order hydrodynamic moments cause rod-like swimmers to follow oscillatory trajectories in quiescent fluid between two parallel plates, using a comb…
▽ More
Self-propelled colloids (swimmers) in confining geometries follow trajectories determined by hydrodynamic interactions with the bounding surfaces. However, typically these interactions are ignored or truncated to lowest order. We demonstrate that higher-order hydrodynamic moments cause rod-like swimmers to follow oscillatory trajectories in quiescent fluid between two parallel plates, using a combination of lattice-Boltzmann simulations and far-field calculations. This behavior occurs even far from the confining walls and does not require lubrication results. We show that a swimmer's hydrodynamic quadrupole moment is crucial to the onset of the oscillatory trajectories. This insight allows us to develop a simple model for the dynamics near the channel center based on these higher hydrodynamic moments, and suggests opportunities for trajectory-based experimental characterization of swimmers' hydrodynamic properties.
△ Less
Submitted 3 May, 2016;
originally announced May 2016.
-
Lattice-Boltzmann Hydrodynamics of Anisotropic Active Matter
Authors:
Joost de Graaf,
Henri Menke,
Arnold J. T. M. Mathijssen,
Marc Fabritius,
Christian Holm,
Tyler N. Shendruk
Abstract:
A plethora of active matter models exist that describe the behavior of self-propelled particles (or swimmers), both with and without hydrodynamics. However, there are few studies that consider shape-anisotropic swimmers and include hydrodynamic interactions. Here, we introduce a simple method to simulate self-propelled colloids interacting hydrodynamically in a viscous medium using the lattice-Bol…
▽ More
A plethora of active matter models exist that describe the behavior of self-propelled particles (or swimmers), both with and without hydrodynamics. However, there are few studies that consider shape-anisotropic swimmers and include hydrodynamic interactions. Here, we introduce a simple method to simulate self-propelled colloids interacting hydrodynamically in a viscous medium using the lattice-Boltzmann technique. Our model is based on raspberry-type viscous coupling and a force/counter-force formalism which ensures that the system is force free. We consider several anisotropic shapes and characterize their hydrodynamic multipolar flow field. We demonstrate that shape-anisotropy can lead to the presence of a strong quadrupole and octupole moments, in addition to the principle dipole moment. The ability to simulate and characterize these higher-order moments will prove crucial for understanding the behavior of model swimmers in confining geometries.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
-
State Flip at Exceptional Points in Atomic Spectra
Authors:
Henri Menke,
Marcel Klett,
Holger Cartarius,
Jörg Main,
Günter Wunner
Abstract:
We study the behavior of the non-adiabatic population transfer between resonances at an exceptional point in the spectrum of the hydrogen atom. It is known that, when the exceptional point is encircled, the system always ends up in the same state, independent of the initial occupation within the two-dimensional subspace spanned by the states coalescing at the exceptional point. We verify this beha…
▽ More
We study the behavior of the non-adiabatic population transfer between resonances at an exceptional point in the spectrum of the hydrogen atom. It is known that, when the exceptional point is encircled, the system always ends up in the same state, independent of the initial occupation within the two-dimensional subspace spanned by the states coalescing at the exceptional point. We verify this behavior for a realistic quantum system, viz. the hydrogen atom in crossed electric and magnetic fields. It is also shown that the non-adiabatic hypothesis can be violated when resonances in the vicinity are taken into account. In addition, we study the non-adiabatic population transfer in the case of a third-order exceptional point, in which three resonances are involved.
△ Less
Submitted 11 December, 2015; v1 submitted 4 November, 2015;
originally announced November 2015.
