-
The nonlinear dynamic behavior of a Rubber-Layer Roller Bearing (RLRB) for vibration isolation
Authors:
N. Menga,
F. Bottiglione,
G. Carbone
Abstract:
In this paper, we study the dynamic behavior of a Rubber-Layer Roller Bearing (RLRB) interposed between a spring-mass elemental superstructure and a vibrating base. Thanks to the viscoelastic rolling contact between the rigid rollers and the rubber layers, the RLRB is able to provide a nonlinear dam** behavior. The effect of the RLRB geometric and material parameters is investigated under period…
▽ More
In this paper, we study the dynamic behavior of a Rubber-Layer Roller Bearing (RLRB) interposed between a spring-mass elemental superstructure and a vibrating base. Thanks to the viscoelastic rolling contact between the rigid rollers and the rubber layers, the RLRB is able to provide a nonlinear dam** behavior. The effect of the RLRB geometric and material parameters is investigated under periodic base excitation, showing that both periodic and aperiodic responses can be achieved. Specifically, since the viscoelastic dam** is non-monotonic (bell shaped), there exist systemdynamic conditions involving the decreasing portion of the dam** curve in which a strongly nonlinear behavior is experienced. In the second part of the paper, we investigate the effectiveness of the nonlinear device in terms of seismic isolation. Focusing on the mean shock of the Central Italy 2016 earthquake, we opportunely tune the material and geometrical RLRB parameters, showing that a significant reduction of both the peak and root-mean-square value of the inertial force acting on the superstructure is achieved, compared to the best performance of a linear base isolation system.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Modelling the non-steady peeling of viscoelastic tapes
Authors:
M. Ceglie,
N. Menga,
G. Carbone
Abstract:
We present a model to study the non-steady V-shaped peeling of a viscoelastic thin tape adhering to a rigid flat substrate. Geometry evolution and viscoelastic creep in the tape are the main features involved in the process, which allows to derive specific governing equations in the framework of energy balance. Finally, these are numerically integrated following an iterative scheme to calculate th…
▽ More
We present a model to study the non-steady V-shaped peeling of a viscoelastic thin tape adhering to a rigid flat substrate. Geometry evolution and viscoelastic creep in the tape are the main features involved in the process, which allows to derive specific governing equations in the framework of energy balance. Finally, these are numerically integrated following an iterative scheme to calculate the process evolution assuming different controlling conditions (peeling front velocity, peeling force, tape tip velocity). Results show that the peeling behavior is strongly affected by viscoelasticity. Specifically, for a given applied force, the peeling can either be prevented, start and stop after some while, or endlessly propagate, depending on the original undeformed tape geometry. Viscoelasticity also entails that the interface toughness strongly increases when the tape tip is fast pulled, which agrees to recent experimental observations on tougher adhesion of natural systems under impact loads, such as see waves and wind gusts.
△ Less
Submitted 30 January, 2024;
originally announced January 2024.
-
Significance of Elastic Coupling for Stresses and Leakage in Frictional Contacts
Authors:
Christian Müller,
Martin H. Müser,
Giuseppe Carbone,
Nicola Menga
Abstract:
We study how the commonly neglected coupling of normal and in-plane elastic response affects tribological properties when Hertzian or randomly rough indenters slide past an elastic body. Compressibility-induced coupling is found to substantially increase maximum tensile stresses, which cause materials to fail, and to decrease friction such that Amontons law is violated macroscopically even when it…
▽ More
We study how the commonly neglected coupling of normal and in-plane elastic response affects tribological properties when Hertzian or randomly rough indenters slide past an elastic body. Compressibility-induced coupling is found to substantially increase maximum tensile stresses, which cause materials to fail, and to decrease friction such that Amontons law is violated macroscopically even when it holds microscopically. Confinement-induced coupling increases friction and enlarges domains of high tension. Moreover, both types of coupling affect the gap topography and thereby leakage. Thus, coupling can be much more than a minor perturbation of a mechanical contact.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Adhesive contact mechanics of viscoelastic materials
Authors:
C. Mandriota,
N. Menga,
G. Carbone
Abstract:
In this study, we propose a theory of rough adhesive contact of viscoelastic materials in steady-state sliding. By exploiting a boundary formulation based on Green function approach, the unknown contact domain is calculated by enforcing the local energy balance at the contact edge, thus considering also the non-conservative work of internal stresses which is directly related to the odd part of the…
▽ More
In this study, we propose a theory of rough adhesive contact of viscoelastic materials in steady-state sliding. By exploiting a boundary formulation based on Green function approach, the unknown contact domain is calculated by enforcing the local energy balance at the contact edge, thus considering also the non-conservative work of internal stresses which is directly related to the odd part of the Green function. Theoretical predictions indicate that viscoelasticity may enhance the adhesive performance depending on the sliding velocity, thus leading to larger contact area and pull-off force compared to the equivalent adhesive elastic case The interplay between viscoelasticity and adhesion also affects the overall friction. Indeed, at low velocity, friction is strongly enhanced compared to the adhesiveless viscoelastic case, mainly due to the small-scale viscoelastic hysteresis induced by the adhesive neck close to the contact edge At higher velocity, the effect of viscoelastic hysteresis occurring at larger scales (bulk material) leads to even higher friction. Under these conditions, in the presence of adhesion, the small-scale and large-scale viscoelastic contributions to friction cannot be separated. Finally, in contrast with usual predictions for crack propagation/healing in infinite systems, we found a non-monotonic trend of the energy release rates at the trailing and leading contact edges, which is consistent with the finiteness of the contact length. All the presented results are strongly supported by existing experimental evidences.
△ Less
Submitted 30 January, 2024; v1 submitted 9 March, 2023;
originally announced March 2023.
-
Theory of viscoelastic adhesion and friction
Authors:
Giuseppe Carbone,
Cosimo Mandriota,
Nicola Menga
Abstract:
We present a novel theory of the adhesive contact of linear viscoelastic materials against rigid substrates moving at constant velocity. Despite the non-conservative behavior of the system, the closure equation of the contact problem can be rigorously formulated in the form of a local energy balance. In the case of adhesiveless contacts, this is equivalent to enforce the stationarity of the total…
▽ More
We present a novel theory of the adhesive contact of linear viscoelastic materials against rigid substrates moving at constant velocity. Despite the non-conservative behavior of the system, the closure equation of the contact problem can be rigorously formulated in the form of a local energy balance. In the case of adhesiveless contacts, this is equivalent to enforce the stationarity of the total energy stored into the viscoelastic material. However, in the presence of interfacial adhesion, the appearance of non-conservative terms leads to different values of the energy release rates G1 and G2 at the contact trailing and leading edges, respectively. Specifically, the present theory predicts a non-monotonic trend of G1 and G2 as function of the indenter velocity, as well as a very significant enhancement of hysteretic friction due to the coupling between adhesion and viscoelasticity, compared to the adhesiveless case. Both predictions are in very good agreement with existing experimental data.
△ Less
Submitted 14 September, 2022; v1 submitted 17 August, 2022;
originally announced August 2022.
-
The role of interfacial friction on the peeling of thin viscoelastic tapes
Authors:
Marco Ceglie,
Nicola Menga,
Giuseppe Carbone
Abstract:
We study the peeling process of a thin viscoelastic tape from a rigid substrate. Two different boundary conditions are considered at the interface between the tape and the substrate: stuck adhesion, and relative sliding in the presence of frictional shear stress. In the case of perfectly sticking interfaces, we found that the viscoelastic peeling behavior resembles the classical Kendall behavior o…
▽ More
We study the peeling process of a thin viscoelastic tape from a rigid substrate. Two different boundary conditions are considered at the interface between the tape and the substrate: stuck adhesion, and relative sliding in the presence of frictional shear stress. In the case of perfectly sticking interfaces, we found that the viscoelastic peeling behavior resembles the classical Kendall behavior of elastic tapes, with the elastic modulus given by the tape high-frequency viscoelastic modulus. Including the effect of frictional sliding, which occurs at the interface adjacent to the peeling front, makes the peeling behavior strongly dependent on the peeling velocity. Also, at sufficiently small peeling angles, we predict a tougher peeling behavior than the classical stuck cases. This phenomenon is in agreement with recent experimental evidences indicating that several biological systems (e.g. geckos, spiders) exploit low-angle peeling to control attachment force and locomotion.
△ Less
Submitted 15 November, 2021; v1 submitted 10 September, 2021;
originally announced September 2021.
-
Nonlinear viscoelastic isolation for seismic vibration mitigation
Authors:
N. Menga,
F. Bottiglione,
G. Carbone
Abstract:
The aim of this paper is to assess the effectiveness of nonlinear viscoelastic dam** in controlling base-excited vibrations. Specifically, the focus is on investigating the robustness of the nonlinear base isolation performance in controlling the system response due to a wide set of possible excitation spectra. The dynamic model is derived to study a simple structure whose base isolation is prov…
▽ More
The aim of this paper is to assess the effectiveness of nonlinear viscoelastic dam** in controlling base-excited vibrations. Specifically, the focus is on investigating the robustness of the nonlinear base isolation performance in controlling the system response due to a wide set of possible excitation spectra. The dynamic model is derived to study a simple structure whose base isolation is provided via a Rubber-Layer Roller Bearing (RLRB) (rigid cylinders rolling on rigid plates with highly dam** rubber coatings) equipped with a nonlinear cubic spring, thus presenting both nonlinear dam** and stiffness. We found that, under periodic loading, due to the non-monotonic bell-shaped viscoelastic dam** arising from the viscoelastic rolling contacts, different dynamic regimes occur mostly depending on whether the dam** peak is overcome or not. Interestingly, in the former case, poorly damped self-excited vibrations may be triggered by the steep dam** decrease. Moreover, in order to investigate the robustness of the isolation performance, we consider a set of real seismic excitations, showing that tuned nonlinear RLRB provide loads isolation in a wider range of excitation spectra, compared to generic linear isolators. This is peculiarly suited for applications (such as seismic and failure engineering) in which the specific excitation spectrum is unknown a priori, and blind design on statistical data has to be employed.
△ Less
Submitted 7 July, 2020;
originally announced July 2020.
-
Exploring the effect of geometric coupling on friction and energy dissipation in rough contacts of elastic and viscoelastic coatings
Authors:
N. Menga,
G. Carbone,
D. Dini
Abstract:
We study the frictional behavior of both elastic and viscoelastic thin coatings bonded to a seemingly rigid substrate and sliding against a rough profile in the presence of Coulomb friction at the interface. The aim is to explore the effect of the coupling between the normal and tangential displacement fields arising from the finiteness of the material thickness and to quantify the contribution th…
▽ More
We study the frictional behavior of both elastic and viscoelastic thin coatings bonded to a seemingly rigid substrate and sliding against a rough profile in the presence of Coulomb friction at the interface. The aim is to explore the effect of the coupling between the normal and tangential displacement fields arising from the finiteness of the material thickness and to quantify the contribution this can have on energy losses. We found that, due to normal-tangential coupling, asymmetric contacts and consequently additional friction are observed even for purely elastic layers, indeed associated with zero bulk energy dissipation. Furthermore, enhanced viscoelastic friction is reported in the case of viscoelastic coatings due to coupling, this time also entailing larger bulk energy dissipation. Geometric coupling also introduces additional interactions involving the larger scales normal displacements, which leads to a significant increase of the contact area, under given normal load, compared to the uncoupled contacts. These results show that, in the case of contact interfaces involving thin deformable coating bonded to significantly stiffer substrate, the effect of interfacial shear stresses on the frictional and contact behavior cannot be neglected.
△ Less
Submitted 17 December, 2020; v1 submitted 29 June, 2020;
originally announced June 2020.
-
Tuning the periodic V-peeling behavior of elastic tapes applied to thin compliant substrates
Authors:
Nicola Menga,
Daniele Dini,
Giuseppe Carbone
Abstract:
In this paper, we investigate the periodic peeling behavior of opposing symmetric peeling fronts involving an elastic tape peeled off from a deformable substrate of finite thickness, backed onto a rigid foundation. We treat the problem by means of an energetic formulation, and we found that, depending on the values of the initial detached length $l$, substrate thickness $h$, and peeling periodicit…
▽ More
In this paper, we investigate the periodic peeling behavior of opposing symmetric peeling fronts involving an elastic tape peeled off from a deformable substrate of finite thickness, backed onto a rigid foundation. We treat the problem by means of an energetic formulation, and we found that, depending on the values of the initial detached length $l$, substrate thickness $h$, and peeling periodicity $λ$, the translational invariance of the peeling process is lost and restored, as the elastic interaction between the peeling fronts is limited by the substrate thickness. Indeed, given $h$ and $λ$, a critical value of the detached length can be found, which is able to prevent unstable peeling of the tape under a fixed applied load, thus resulting in enhanced adhesion strength, with respect to the classical Kendall's solution for peeling from a rigid substrate. On the other hand, given the geometrical system configuration (i.e. the detached length $l$) the load necessary to trigger the peeling can be minimized by conveniently tuning the ratio $h/λ$. This feature might be of interest for the development of innovative designs for future biomedical devices, such as Transdermal Drug Delivery Systems or wound dressing, requiring low peel adhesion for safe successive removals.
△ Less
Submitted 25 November, 2019; v1 submitted 20 November, 2019;
originally announced November 2019.
-
Do uniform tangential interfacial stresses affect adhesion?
Authors:
Nicola Menga,
Giuseppe Carbone,
Daniele Dini
Abstract:
We present theoretical arguments, based on linear elasticity and thermodynamics, to show that interfacial tangential stresses in sliding adhesive contacts does not affet at all the adhesive behavior of the system, which then follows the classical JKR solution. Our finding explains the experimental observation of Vorvolakos and Chaudhury in 2003, who found that the contact area of a PDMS sphere rem…
▽ More
We present theoretical arguments, based on linear elasticity and thermodynamics, to show that interfacial tangential stresses in sliding adhesive contacts does not affet at all the adhesive behavior of the system, which then follows the classical JKR solution. Our finding explains the experimental observation of Vorvolakos and Chaudhury in 2003, who found that the contact area of a PDMS sphere remains constant during sliding and is in agreement with the JKR solution, at least up to velocity of 1mm/s, and of Carpick et al. Carpick, who observed that the friction force between a platinum-coated atomic force microscope (AFM) tip and the surface of mica in ultrahigh vacuum (UHV) varies with load in proportion to the contact area predicted by the Johnson-Kendall-Roberts (JKR). We show that a reduction of the contact area, experimentlly observed at higher sliding speeds, can be caused by a reduction of the density of adhesive bonds as the velocity is increased, or caused by the repulsive energy term associated with the stress spatial fluctuation at the interface. This may explain why adhesion is completely masked at relatively large sliding velocities.
This version of the paper follows the publication of the Corrigendum: Nicola Menga, Giuseppe Carbone, Daniele Dini: Corrigendum to "Do uniform tangential interfacial stresses enhance adhesion?" [Journal of the Mechanics and Physics of Solids 112 (2018) 145--156], Journal of the Mechanics and Physics of Solids, 133, 103744, https://doi.org/10.1016/j.jmps.2019.103744, available on line since 8 October 2019.
△ Less
Submitted 17 December, 2020; v1 submitted 17 October, 2017;
originally announced October 2017.
